- 'for_each_card_auxs'
- 'for_each_card_auxs_safe'
- 'for_each_card_components'
+ - 'for_each_card_dapms'
- 'for_each_card_pre_auxs'
- 'for_each_card_prelinks'
- 'for_each_card_rtds'
- 'for_each_card_rtds_safe'
+ - 'for_each_card_widgets'
+ - 'for_each_card_widgets_safe'
- 'for_each_cgroup_storage_type'
- 'for_each_child_of_node'
- 'for_each_clear_bit'
- 'for_each_cpu_and'
- 'for_each_cpu_not'
- 'for_each_cpu_wrap'
+ - 'for_each_dapm_widgets'
- 'for_each_dev_addr'
- 'for_each_dev_scope'
- 'for_each_displayid_db'
- 'for_each_dpcm_fe'
- 'for_each_drhd_unit'
- 'for_each_dss_dev'
- - 'for_each_efi_handle'
- 'for_each_efi_memory_desc'
- 'for_each_efi_memory_desc_in_map'
- 'for_each_element'
- 'for_each_ip_tunnel_rcu'
- 'for_each_irq_nr'
- 'for_each_link_codecs'
+ - 'for_each_link_cpus'
- 'for_each_link_platforms'
- 'for_each_lru'
- 'for_each_matching_node'
- 'for_each_pci_bridge'
- 'for_each_pci_dev'
- 'for_each_pci_msi_entry'
+ - 'for_each_pcm_streams'
- 'for_each_populated_zone'
- 'for_each_possible_cpu'
- 'for_each_present_cpu'
- 'for_each_property_of_node'
- 'for_each_registered_fb'
- 'for_each_reserved_mem_region'
- - 'for_each_rtd_codec_dai'
- - 'for_each_rtd_codec_dai_rollback'
+ - 'for_each_rtd_codec_dais'
+ - 'for_each_rtd_codec_dais_rollback'
- 'for_each_rtd_components'
+ - 'for_each_rtd_cpu_dais'
+ - 'for_each_rtd_cpu_dais_rollback'
+ - 'for_each_rtd_dais'
- 'for_each_set_bit'
- 'for_each_set_bit_from'
- 'for_each_set_clump8'
- 'klp_for_each_object'
- 'klp_for_each_object_safe'
- 'klp_for_each_object_static'
+ - 'kunit_suite_for_each_test_case'
- 'kvm_for_each_memslot'
- 'kvm_for_each_vcpu'
- 'list_for_each'
- 'of_property_for_each_string'
- 'of_property_for_each_u32'
- 'pci_bus_for_each_resource'
+ - 'pcm_for_each_format'
- 'ping_portaddr_for_each_entry'
- 'plist_for_each'
- 'plist_for_each_continue'
MacroBlockBegin: ''
MacroBlockEnd: ''
MaxEmptyLinesToKeep: 1
-NamespaceIndentation: Inner
+NamespaceIndentation: None
#ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
ObjCBlockIndentWidth: 8
ObjCSpaceAfterProperty: true
space-efficient. If this option is not present, large padding is
used - that is for compatibility with older kernels.
-
-The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can
-be changed when reloading the target (load an inactive table and swap the
-tables with suspend and resume). The other arguments should not be changed
-when reloading the target because the layout of disk data depend on them
-and the reloaded target would be non-functional.
+allow_discards
+ Allow block discard requests (a.k.a. TRIM) for the integrity device.
+ Discards are only allowed to devices using internal hash.
+
+The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and
+allow_discards can be changed when reloading the target (load an inactive
+table and swap the tables with suspend and resume). The other arguments
+should not be changed when reloading the target because the layout of disk
+data depend on them and the reloaded target would be non-functional.
The layout of the formatted block device:
usbcore.old_scheme_first=
[USB] Start with the old device initialization
- scheme, applies only to low and full-speed devices
- (default 0 = off).
+ scheme (default 0 = off).
usbcore.usbfs_memory_mb=
[USB] Memory limit (in MB) for buffers allocated by
modprobe
========
-This gives the full path of the modprobe command which the kernel will
-use to load modules. This can be used to debug module loading
-requests::
+The full path to the usermode helper for autoloading kernel modules,
+by default "/sbin/modprobe". This binary is executed when the kernel
+requests a module. For example, if userspace passes an unknown
+filesystem type to mount(), then the kernel will automatically request
+the corresponding filesystem module by executing this usermode helper.
+This usermode helper should insert the needed module into the kernel.
+
+This sysctl only affects module autoloading. It has no effect on the
+ability to explicitly insert modules.
+
+This sysctl can be used to debug module loading requests::
echo '#! /bin/sh' > /tmp/modprobe
echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe
chmod a+x /tmp/modprobe
echo /tmp/modprobe > /proc/sys/kernel/modprobe
-This only applies when the *kernel* is requesting that the module be
-loaded; it won't have any effect if the module is being loaded
-explicitly using ``modprobe`` from userspace.
+Alternatively, if this sysctl is set to the empty string, then module
+autoloading is completely disabled. The kernel will not try to
+execute a usermode helper at all, nor will it call the
+kernel_module_request LSM hook.
+If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
+then the configured static usermode helper overrides this sysctl,
+except that the empty string is still accepted to completely disable
+module autoloading as described above.
modules_disabled
================
successful IPC object allocation. If an IPC object allocation syscall
fails, it is undefined if the value remains unmodified or is reset to -1.
-modprobe:
-=========
-
-The path to the usermode helper for autoloading kernel modules, by
-default "/sbin/modprobe". This binary is executed when the kernel
-requests a module. For example, if userspace passes an unknown
-filesystem type to mount(), then the kernel will automatically request
-the corresponding filesystem module by executing this usermode helper.
-This usermode helper should insert the needed module into the kernel.
-
-This sysctl only affects module autoloading. It has no effect on the
-ability to explicitly insert modules.
-
-If this sysctl is set to the empty string, then module autoloading is
-completely disabled. The kernel will not try to execute a usermode
-helper at all, nor will it call the kernel_module_request LSM hook.
-
-If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
-then the configured static usermode helper overrides this sysctl,
-except that the empty string is still accepted to completely disable
-module autoloading as described above.
-
nmi_watchdog
============
Version 1 of the Activity Monitors architecture implements a counter group
of four fixed and architecturally defined 64-bit event counters.
- - CPU cycle counter: increments at the frequency of the CPU.
- - Constant counter: increments at the fixed frequency of the system
- clock.
- - Instructions retired: increments with every architecturally executed
- instruction.
- - Memory stall cycles: counts instruction dispatch stall cycles caused by
- misses in the last level cache within the clock domain.
+
+- CPU cycle counter: increments at the frequency of the CPU.
+- Constant counter: increments at the fixed frequency of the system
+ clock.
+- Instructions retired: increments with every architecturally executed
+ instruction.
+- Memory stall cycles: counts instruction dispatch stall cycles caused by
+ misses in the last level cache within the clock domain.
When in WFI or WFE these counters do not increment.
Firmware (code running at higher exception levels, e.g. arm-tf) support is
needed to:
- - Enable access for lower exception levels (EL2 and EL1) to the AMU
- registers.
- - Enable the counters. If not enabled these will read as 0.
- - Save/restore the counters before/after the CPU is being put/brought up
- from the 'off' power state.
+
+- Enable access for lower exception levels (EL2 and EL1) to the AMU
+ registers.
+- Enable the counters. If not enabled these will read as 0.
+- Save/restore the counters before/after the CPU is being put/brought up
+ from the 'off' power state.
When using kernels that have this feature enabled but boot with broken
firmware the user may experience panics or lockups when accessing the
The fixed counters of AMUv1 are accessible though the following system
register definitions:
- - SYS_AMEVCNTR0_CORE_EL0
- - SYS_AMEVCNTR0_CONST_EL0
- - SYS_AMEVCNTR0_INST_RET_EL0
- - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+- SYS_AMEVCNTR0_CORE_EL0
+- SYS_AMEVCNTR0_CONST_EL0
+- SYS_AMEVCNTR0_INST_RET_EL0
+- SYS_AMEVCNTR0_MEM_STALL_EL0
Auxiliary platform specific counters can be accessed using
SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
----------------
Currently, access from userspace to the AMU registers is disabled due to:
- - Security reasons: they might expose information about code executed in
- secure mode.
- - Purpose: AMU counters are intended for system management use.
+
+- Security reasons: they might expose information about code executed in
+ secure mode.
+- Purpose: AMU counters are intended for system management use.
Also, the presence of the feature is not visible to userspace.
Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
guest side is disabled due to:
- - Security reasons: they might expose information about code executed
- by other guests or the host.
+
+- Security reasons: they might expose information about code executed
+ by other guests or the host.
Any attempt to access the AMU registers will result in an UNDEFINED
exception being injected into the guest.
Use ktime_get() or ktime_get_ts64() instead.
-.. c:function:: struct timeval do_gettimeofday( void )
- struct timespec getnstimeofday( void )
- struct timespec64 getnstimeofday64( void )
+.. c:function:: void do_gettimeofday( struct timeval * )
+ void getnstimeofday( struct timespec * )
+ void getnstimeofday64( struct timespec64 * )
void ktime_get_real_ts( struct timespec * )
ktime_get_real_ts64() is a direct replacement, but consider using
DT_DOC_CHECKER ?= dt-doc-validate
DT_EXTRACT_EX ?= dt-extract-example
DT_MK_SCHEMA ?= dt-mk-schema
+DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<)
cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
# Use full schemas when checking %.example.dts
DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml
+find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
+ -name 'processed-schema*' ! \
+ -name '*.example.dt.yaml' \)
+
quiet_cmd_mk_schema = SCHEMA $@
- cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
+ cmd_mk_schema = rm -f $@ ; \
+ $(if $(DT_MK_SCHEMA_FLAGS), \
+ echo $(real-prereqs), \
+ $(find_cmd)) | \
+ xargs $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) >> $@
-DT_DOCS = $(addprefix $(src)/, \
- $(shell \
- cd $(srctree)/$(src) && \
- find * \( -name '*.yaml' ! \
- -name 'processed-schema*' ! \
- -name '*.example.dt.yaml' \) \
- ))
+DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
DT_SCHEMA_FILES ?= $(DT_DOCS)
$(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE
$(call if_changed,mk_schema)
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE
$(call if_changed,mk_schema)
description:
See section 2.3.9 of the DeviceTree Specification.
+ '#address-cells': true
+
+ '#size-cells': true
+
required:
- "#interconnect-cells"
- compatible
compatible = "allwinner,sun5i-a13-mbus";
reg = <0x01c01000 0x1000>;
clocks = <&ccu CLK_MBUS>;
+ #address-cells = <1>;
+ #size-cells = <1>;
dma-ranges = <0x00000000 0x40000000 0x20000000>;
#interconnect-cells = <1>;
};
examples:
- |
- vco1: clock@00 {
+ vco1: clock {
compatible = "arm,impd1-vco1";
#clock-cells = <0>;
lock-offset = <0x08>;
-Analog Device ADV7123 Video DAC
--------------------------------
+Analog Devices ADV7123 Video DAC
+--------------------------------
The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
parallel video input.
-Analog Device ADV7511(W)/13/33/35 HDMI Encoders
------------------------------------------
+Analog Devices ADV7511(W)/13/33/35 HDMI Encoders
+------------------------------------------------
The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space
dsi {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0xff450000 0x1000>;
panel@0 {
compatible = "leadtek,ltk500hd1829";
If set, reverse the bit order described in the data mappings below on all
data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
+ port: true
+ ports: true
+
required:
- compatible
- data-mapping
- width-mm
- height-mm
- panel-timing
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
...
dsi {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0xff450000 0x1000>;
panel@0 {
compatible = "xinpeng,xpp055c272";
-Analog Device AXI-DMAC DMA controller
+Analog Devices AXI-DMAC DMA controller
Required properties:
- compatible: Must be "adi,axi-dmac-1.00.a".
# Copyright 2019 Analog Devices Inc.
%YAML 1.2
---
-$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
+$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AXI FAN Control Device Tree Bindings
examples:
- |
- fpga_axi: fpga-axi@0 {
+ fpga_axi: fpga-axi {
#address-cells = <0x2>;
#size-cells = <0x1>;
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/adt7475.yaml#
+$id: http://devicetree.org/schemas/hwmon/adt7475.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ADT7475 hwmon sensor
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#"
+$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: STMicroelectronics STM32 ADC bindings
-* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
+* Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver
Required properties:
- compatible: Has to contain one of the following:
# Copyright 2020 Analog Devices Inc.
%YAML 1.2
---
-$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml#
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD5770R DAC device driver
asserted during driver probe.
maxItems: 1
- channel0:
+ channel@0:
description: Represents an external channel which are
connected to the DAC. Channel 0 can act both as a current
source and sink.
type: object
properties:
- num:
+ reg:
description: This represents the channel number.
- items:
- const: 0
+ const: 0
adi,range-microamp:
description: Output range of the channel.
oneOf:
- - $ref: /schemas/types.yaml#/definitions/int32-array
- items:
- - enum: [0 300000]
- - enum: [-60000 0]
- - enum: [-60000 300000]
+ - const: 0
+ - const: 300000
+ - items:
+ - const: -60000
+ - const: 0
+ - items:
+ - const: -60000
+ - const: 300000
- channel1:
+ channel@1:
description: Represents an external channel which are
connected to the DAC.
type: object
properties:
- num:
+ reg:
description: This represents the channel number.
- items:
- const: 1
+ const: 1
adi,range-microamp:
description: Output range of the channel.
- oneOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- - enum: [0 140000]
- - enum: [0 250000]
+ items:
+ - const: 0
+ - enum: [ 140000, 250000 ]
- channel2:
+ channel@2:
description: Represents an external channel which are
connected to the DAC.
type: object
properties:
- num:
+ reg:
description: This represents the channel number.
- items:
- const: 2
+ const: 2
adi,range-microamp:
description: Output range of the channel.
- oneOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- - enum: [0 140000]
- - enum: [0 250000]
+ items:
+ - const: 0
+ - enum: [ 55000, 150000 ]
patternProperties:
"^channel@([3-5])$":
type: object
description: Represents the external channels which are connected to the DAC.
properties:
- num:
+ reg:
description: This represents the channel number.
- items:
- minimum: 3
- maximum: 5
+ minimum: 3
+ maximum: 5
adi,range-microamp:
description: Output range of the channel.
- oneOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- - enum: [0 45000]
- - enum: [0 100000]
+ items:
+ - const: 0
+ - enum: [ 45000, 100000 ]
required:
- reg
-- diff-channels
-- channel0
-- channel1
-- channel2
-- channel3
-- channel4
-- channel5
+- channel@0
+- channel@1
+- channel@2
+- channel@3
+- channel@4
+- channel@5
examples:
- |
#size-cells = <0>;
ad5770r@0 {
- compatible = "ad5770r";
+ compatible = "adi,ad5770r";
reg = <0>;
spi-max-frequency = <1000000>;
vref-supply = <&vref>;
adi,external-resistor;
reset-gpios = <&gpio 22 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
channel@0 {
- num = <0>;
- adi,range-microamp = <(-60000) 300000>;
+ reg = <0>;
+ adi,range-microamp = <0 300000>;
};
channel@1 {
- num = <1>;
+ reg = <1>;
adi,range-microamp = <0 140000>;
};
channel@2 {
- num = <2>;
+ reg = <2>;
adi,range-microamp = <0 55000>;
};
channel@3 {
- num = <3>;
+ reg = <3>;
adi,range-microamp = <0 45000>;
};
channel@4 {
- num = <4>;
+ reg = <4>;
adi,range-microamp = <0 45000>;
};
channel@5 {
- num = <5>;
+ reg = <5>;
adi,range-microamp = <0 45000>;
};
};
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- i2c@00000000 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
edt-ft5x06@38 {
cell with zero.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- minItems: 4
- maxItems: 4
+ - minItems: 4
+ maxItems: 4
required:
#include <dt-bindings/clock/tegra186-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- memory-controller@2c00000 {
- compatible = "nvidia,tegra186-mc";
- reg = <0x0 0x02c00000 0x0 0xb0000>;
- interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-
+ bus {
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>;
+ memory-controller@2c00000 {
+ compatible = "nvidia,tegra186-mc";
+ reg = <0x0 0x02c00000 0x0 0xb0000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
- /*
- * Memory clients have access to all 40 bits that the memory
- * controller can address.
- */
- dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+ /*
+ * Memory clients have access to all 40 bits that the memory
+ * controller can address.
+ */
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
- external-memory-controller@2c60000 {
- compatible = "nvidia,tegra186-emc";
- reg = <0x0 0x02c60000 0x0 0x50000>;
- interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA186_CLK_EMC>;
- clock-names = "emc";
+ external-memory-controller@2c60000 {
+ compatible = "nvidia,tegra186-emc";
+ reg = <0x0 0x02c60000 0x0 0x50000>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_EMC>;
+ clock-names = "emc";
- nvidia,bpmp = <&bpmp>;
+ nvidia,bpmp = <&bpmp>;
+ };
};
};
#include <dt-bindings/leds/common.h>
i2c {
- pmic: pmic@4b {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic: pmic@4b {
compatible = "rohm,bd71837";
reg = <0x4b>;
interrupt-parent = <&gpio1>;
#include <dt-bindings/leds/common.h>
i2c {
- pmic: pmic@4b {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic: pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
interrupt-parent = <&gpio1>;
additionalProperties: false
- additionalProperties: false
-
additionalProperties: false
required:
- |
#include <dt-bindings/mfd/st,stpmic1.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- i2c@0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@33 {
bits of a vendor specific ID.
- items:
- pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+ - const: ethernet-phy-ieee802.3-c22
+ - items:
+ - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
- const: ethernet-phy-ieee802.3-c45
reg:
- fsl,err006687-workaround-present: If present indicates that the system has
the hardware workaround for ERR006687 applied and does not need a software
workaround.
+- gpr: phandle of SoC general purpose register mode. Required for wake on LAN
+ on some SoCs
-interrupt-names: names of the interrupts listed in interrupts property in
the same order. The defaults if not specified are
__Number of interrupts__ __Default__
switch@10 {
compatible = "qca,qca8337";
+ reg = <0x10>;
/* ... */
};
};
Optional properties for compatible string qcom,wcn399x-bt:
- - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+ - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
- firmware-name: specify the name of nvm firmware to load
- clocks: clock provided to the controller
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 63
- default: 0
+ default: 32
qcom,charge-ctrl-value:
description:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 3
- default: 2
+ default: 0
qcom,preemphasis-width:
description:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 3
- default: 0
+ default: 1
required:
- compatible
bindings specified in
Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
Torrent SERDES should follow the bindings specified in
- Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+ Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
required:
- compatible
examples:
- |
- cros-ec@0 {
- compatible = "google,cros-ec-spi";
- cros_ec_pwm: ec-pwm {
- compatible = "google,cros-ec-pwm";
- #pwm-cells = <1>;
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+
+ cros_ec_pwm: ec-pwm {
+ compatible = "google,cros-ec-pwm";
+ #pwm-cells = <1>;
+ };
};
};
type: object
additionalProperties: false
- additionalProperties: false
required:
- compatible
description: |
disables over voltage protection of this buck
- additionalProperties: false
+ unevaluatedProperties: false
+
additionalProperties: false
required:
description:
should be "ldo1", ..., "ldo7"
+ unevaluatedProperties: false
+
"^BUCK[1-7]$":
type: object
allOf:
required:
- regulator-name
- additionalProperties: false
+
+ unevaluatedProperties: false
+
additionalProperties: false
description:
should be "ldo1", ..., "ldo7"
+ unevaluatedProperties: false
+
"^BUCK[1-8]$":
type: object
allOf:
required:
- regulator-name
- additionalProperties: false
+
+ unevaluatedProperties: false
+
additionalProperties: false
description:
should be "ldo1", ..., "ldo6"
+ unevaluatedProperties: false
+
"^BUCK[1-6]$":
type: object
allOf:
required:
- regulator-name
- additionalProperties: false
+
+ unevaluatedProperties: false
+
additionalProperties: false
examples:
- |
- rng {
+ rng@7e104000 {
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
interrupts = <2 29>;
- const: tx
- const: rx
+ power-domains:
+ maxItems: 1
+
rockchip,capture-channels:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
+++ /dev/null
-* Rockchip SPDIF transceiver
-
-The S/PDIF audio block is a stereo transceiver that allows the
-processor to receive and transmit digital audio via an coaxial cable or
-a fibre cable.
-
-Required properties:
-
-- compatible: should be one of the following:
- - "rockchip,rk3066-spdif"
- - "rockchip,rk3188-spdif"
- - "rockchip,rk3228-spdif"
- - "rockchip,rk3288-spdif"
- - "rockchip,rk3328-spdif"
- - "rockchip,rk3366-spdif"
- - "rockchip,rk3368-spdif"
- - "rockchip,rk3399-spdif"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: should contain the SPDIF interrupt.
-- dmas: DMA specifiers for tx dma. See the DMA client binding,
- Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should be "tx"
-- clocks: a list of phandle + clock-specifier pairs, one for each entry
- in clock-names.
-- clock-names: should contain following:
- - "hclk": clock for SPDIF controller
- - "mclk" : clock for SPDIF bus
-
-Required properties on RK3288:
- - rockchip,grf: the phandle of the syscon node for the general register
- file (GRF)
-
-Example for the rk3188 SPDIF controller:
-
-spdif: spdif@1011e000 {
- compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
- reg = <0x1011e000 0x2000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac1_s 8>;
- dma-names = "tx";
- clock-names = "hclk", "mclk";
- clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
- #sound-dai-cells = <0>;
-};
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPDIF transceiver
+
+description:
+ The S/PDIF audio block is a stereo transceiver that allows the
+ processor to receive and transmit digital audio via a coaxial or
+ fibre cable.
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3066-spdif
+ - const: rockchip,rk3228-spdif
+ - const: rockchip,rk3328-spdif
+ - const: rockchip,rk3366-spdif
+ - const: rockchip,rk3368-spdif
+ - const: rockchip,rk3399-spdif
+ - items:
+ - enum:
+ - rockchip,rk3188-spdif
+ - rockchip,rk3288-spdif
+ - const: rockchip,rk3066-spdif
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: clock for SPDIF bus
+ - description: clock for SPDIF controller
+
+ clock-names:
+ items:
+ - const: mclk
+ - const: hclk
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: tx
+
+ power-domains:
+ maxItems: 1
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle of the syscon node for the GRF register.
+ Required property on RK3288.
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+ - "#sound-dai-cells"
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-spdif
+
+then:
+ required:
+ - rockchip,grf
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3188-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ spdif: spdif@1011e000 {
+ compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+ reg = <0x1011e000 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+ clock-names = "mclk", "hclk";
+ dmas = <&dmac1_s 8>;
+ dma-names = "tx";
+ #sound-dai-cells = <0>;
+ };
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- soc: soc@0 {
+ soc: soc {
#address-cells = <2>;
#size-cells = <2>;
examples:
- |
#include <dt-bindings/clock/jz4740-cgu.h>
- usb_phy: usb-phy@0 {
+ usb_phy: usb-phy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
the node is not important. The content of the node is defined in dwc3.txt.
Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
-Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
+Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
+Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
Example device nodes:
- renesas,r8a774c0-usb3-peri # RZ/G2E
- renesas,r8a7795-usb3-peri # R-Car H3
- renesas,r8a7796-usb3-peri # R-Car M3-W
+ - renesas,r8a77961-usb3-peri # R-Car M3-W+
- renesas,r8a77965-usb3-peri # R-Car M3-N
- renesas,r8a77990-usb3-peri # R-Car E3
- const: renesas,rcar-gen3-usb3-peri
- renesas,usbhs-r8a774c0 # RZ/G2E
- renesas,usbhs-r8a7795 # R-Car H3
- renesas,usbhs-r8a7796 # R-Car M3-W
+ - renesas,usbhs-r8a77961 # R-Car M3-W+
- renesas,usbhs-r8a77965 # R-Car M3-N
- renesas,usbhs-r8a77990 # R-Car E3
- renesas,usbhs-r8a77995 # R-Car D3
the node is not important. The content of the node is defined in dwc3.txt.
Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY
+Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY
Example device nodes:
- "renesas,xhci-r8a7791" for r8a7791 SoC
- "renesas,xhci-r8a7793" for r8a7793 SoC
- "renesas,xhci-r8a7795" for r8a7795 SoC
- - "renesas,xhci-r8a7796" for r8a7796 SoC
+ - "renesas,xhci-r8a7796" for r8a77960 SoC
+ - "renesas,xhci-r8a77961" for r8a77961 SoC
- "renesas,xhci-r8a77965" for r8a77965 SoC
- "renesas,xhci-r8a77990" for r8a77990 SoC
- "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
struct dentry *parent, u8 *value);
void debugfs_create_u16(const char *name, umode_t mode,
struct dentry *parent, u16 *value);
- struct dentry *debugfs_create_u32(const char *name, umode_t mode,
- struct dentry *parent, u32 *value);
+ void debugfs_create_u32(const char *name, umode_t mode,
+ struct dentry *parent, u32 *value);
void debugfs_create_u64(const char *name, umode_t mode,
struct dentry *parent, u64 *value);
* Renesas ISL68220
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl68220'
Addresses scanned: -
* Renesas ISL68221
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl68221'
Addresses scanned: -
* Renesas ISL68222
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl68222'
Addresses scanned: -
* Renesas ISL68223
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl68223'
Addresses scanned: -
* Renesas ISL68224
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl68224'
Addresses scanned: -
* Renesas ISL68225
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl68225'
Addresses scanned: -
* Renesas ISL68226
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl68226'
Addresses scanned: -
* Renesas ISL68227
- Prefix: 'raa_dmpvr2_1rail'
+ Prefix: 'isl68227'
Addresses scanned: -
* Renesas ISL68229
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl68229'
Addresses scanned: -
* Renesas ISL68233
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl68233'
Addresses scanned: -
* Renesas ISL68239
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl68239'
Addresses scanned: -
* Renesas ISL69222
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69222'
Addresses scanned: -
* Renesas ISL69223
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl69223'
Addresses scanned: -
* Renesas ISL69224
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69224'
Addresses scanned: -
* Renesas ISL69225
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69225'
Addresses scanned: -
* Renesas ISL69227
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl69227'
Addresses scanned: -
* Renesas ISL69228
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl69228'
Addresses scanned: -
* Renesas ISL69234
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69234'
Addresses scanned: -
* Renesas ISL69236
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69236'
Addresses scanned: -
* Renesas ISL69239
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl69239'
Addresses scanned: -
* Renesas ISL69242
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69242'
Addresses scanned: -
* Renesas ISL69243
- Prefix: 'raa_dmpvr2_1rail'
+ Prefix: 'isl69243'
Addresses scanned: -
* Renesas ISL69247
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69247'
Addresses scanned: -
* Renesas ISL69248
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69248'
Addresses scanned: -
* Renesas ISL69254
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69254'
Addresses scanned: -
* Renesas ISL69255
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69255'
Addresses scanned: -
* Renesas ISL69256
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69256'
Addresses scanned: -
* Renesas ISL69259
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69259'
Addresses scanned: -
* Renesas ISL69260
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69260'
Addresses scanned: -
* Renesas ISL69268
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69268'
Addresses scanned: -
* Renesas ISL69269
- Prefix: 'raa_dmpvr2_3rail'
+ Prefix: 'isl69269'
Addresses scanned: -
* Renesas ISL69298
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'isl69298'
Addresses scanned: -
* Renesas RAA228000
- Prefix: 'raa_dmpvr2_hv'
+ Prefix: 'raa228000'
Addresses scanned: -
* Renesas RAA228004
- Prefix: 'raa_dmpvr2_hv'
+ Prefix: 'raa228004'
Addresses scanned: -
* Renesas RAA228006
- Prefix: 'raa_dmpvr2_hv'
+ Prefix: 'raa228006'
Addresses scanned: -
* Renesas RAA228228
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'raa228228'
Addresses scanned: -
* Renesas RAA229001
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'raa229001'
Addresses scanned: -
* Renesas RAA229004
- Prefix: 'raa_dmpvr2_2rail'
+ Prefix: 'raa229004'
Addresses scanned: -
will be displayed with "make KBUILD_VERBOSE=0".
---- 6.9 Preprocessing linker scripts
+6.9 Preprocessing linker scripts
+--------------------------------
When the vmlinux image is built, the linker script
arch/$(ARCH)/kernel/vmlinux.lds is used.
* :doc:`netdevsim`
* :doc:`mlxsw`
+.. _Generic-Packet-Trap-Groups:
+
Generic Packet Trap Groups
==========================
z8530book
msg_zerocopy
failover
+ net_dim
net_failover
phy
sfp-phylink
tcp_challenge_ack_limit - INTEGER
Limits number of Challenge ACK sent per second, as recommended
in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
- Default: 100
+ Default: 1000
tcp_rx_skb_cache - BOOLEAN
Controls a per TCP socket cache of one skb, that might help
reduces overall throughput, in such case you should disable it.
Default: 1
+ping_group_range - 2 INTEGERS
+ Restrict ICMP_PROTO datagram sockets to users in the group range.
+ The default is "1 0", meaning, that nobody (not even root) may
+ create ping sockets. Setting it to "100 100" would grant permissions
+ to the single group. "0 4294967295" would enable it for the world, "100
+ 4294967295" would enable it for the users, but not daemons.
+
tcp_early_demux - BOOLEAN
Enable early demux for established TCP sockets.
Default: 1
+======================================================
Net DIM - Generic Network Dynamic Interrupt Moderation
======================================================
-Author:
- Tal Gilboa <talgi@mellanox.com>
-
-
-Contents
-=========
+:Author: Tal Gilboa <talgi@mellanox.com>
-- Assumptions
-- Introduction
-- The Net DIM Algorithm
-- Registering a Network Device to DIM
-- Example
+.. contents:: :depth: 2
-Part 0: Assumptions
-======================
+Assumptions
+===========
This document assumes the reader has basic knowledge in network drivers
and in general interrupt moderation.
-Part I: Introduction
-======================
+Introduction
+============
Dynamic Interrupt Moderation (DIM) (in networking) refers to changing the
interrupt moderation configuration of a channel in order to optimize packet
increase bandwidth over reducing interrupt rate.
-Part II: The Net DIM Algorithm
-===============================
+Net DIM Algorithm
+=================
Each iteration of the Net DIM algorithm follows these steps:
-1. Calculates new data sample.
-2. Compares it to previous sample.
-3. Makes a decision - suggests interrupt moderation configuration fields.
-4. Applies a schedule work function, which applies suggested configuration.
+
+#. Calculates new data sample.
+#. Compares it to previous sample.
+#. Makes a decision - suggests interrupt moderation configuration fields.
+#. Applies a schedule work function, which applies suggested configuration.
The first two steps are straightforward, both the new and the previous data are
supplied by the driver registered to Net DIM. The previous data is the new data
under some conditions.
-Part III: Registering a Network Device to DIM
-==============================================
+Registering a Network Device to DIM
+===================================
-Net DIM API exposes the main function net_dim(struct dim *dim,
-struct dim_sample end_sample). This function is the entry point to the Net
+Net DIM API exposes the main function net_dim().
+This function is the entry point to the Net
DIM algorithm and has to be called every time the driver would like to check if
it should change interrupt moderation parameters. The driver should provide two
-data structures: struct dim and struct dim_sample. Struct dim
+data structures: :c:type:`struct dim <dim>` and
+:c:type:`struct dim_sample <dim_sample>`. :c:type:`struct dim <dim>`
describes the state of DIM for a specific object (RX queue, TX queue,
other queues, etc.). This includes the current selected profile, previous data
samples, the callback function provided by the driver and more.
-Struct dim_sample describes a data sample, which will be compared to the
-data sample stored in struct dim in order to decide on the algorithm's next
+:c:type:`struct dim_sample <dim_sample>` describes a data sample,
+which will be compared to the data sample stored in :c:type:`struct dim <dim>`
+in order to decide on the algorithm's next
step. The sample should include bytes, packets and interrupts, measured by
the driver.
interrupt. Since Net DIM has a built-in moderation and it might decide to skip
iterations under certain conditions, there is no need to moderate the net_dim()
calls as well. As mentioned above, the driver needs to provide an object of type
-struct dim to the net_dim() function call. It is advised for each entity
-using Net DIM to hold a struct dim as part of its data structure and use it
-as the main Net DIM API object. The struct dim_sample should hold the latest
+:c:type:`struct dim <dim>` to the net_dim() function call. It is advised for
+each entity using Net DIM to hold a :c:type:`struct dim <dim>` as part of its
+data structure and use it as the main Net DIM API object.
+The :c:type:`struct dim_sample <dim_sample>` should hold the latest
bytes, packets and interrupts count. No need to perform any calculations, just
include the raw data.
the proper state in order to move to the next iteration.
-Part IV: Example
-=================
+Example
+=======
The following code demonstrates how to register a driver to Net DIM. The actual
usage is not complete but it should make the outline of the usage clear.
-my_driver.c:
+.. code-block:: c
-#include <linux/dim.h>
+ #include <linux/dim.h>
-/* Callback for net DIM to schedule on a decision to change moderation */
-void my_driver_do_dim_work(struct work_struct *work)
-{
+ /* Callback for net DIM to schedule on a decision to change moderation */
+ void my_driver_do_dim_work(struct work_struct *work)
+ {
/* Get struct dim from struct work_struct */
struct dim *dim = container_of(work, struct dim,
work);
/* Signal net DIM work is done and it should move to next iteration */
dim->state = DIM_START_MEASURE;
-}
+ }
-/* My driver's interrupt handler */
-int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
-{
+ /* My driver's interrupt handler */
+ int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
+ {
...
/* A struct to hold current measured data */
struct dim_sample dim_sample;
/* Call net DIM */
net_dim(&my_entity->dim, dim_sample);
...
-}
+ }
-/* My entity's initialization function (my_entity was already allocated) */
-int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...)
-{
+ /* My entity's initialization function (my_entity was already allocated) */
+ int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...)
+ {
...
/* Initiate struct work_struct with my driver's callback function */
INIT_WORK(&my_entity->dim.work, my_driver_do_dim_work);
...
-}
+ }
+
+Dynamic Interrupt Moderation (DIM) library API
+==============================================
+
+.. kernel-doc:: include/linux/dim.h
+ :internal:
must be __BOOT_DS; interrupt must be disabled; %rsi must hold the base
address of the struct boot_params.
-EFI Handover Protocol
-=====================
+EFI Handover Protocol (deprecated)
+==================================
This protocol allows boot loaders to defer initialisation to the EFI
boot stub. The boot loader is required to load the kernel/initrd(s)
which is hdr->handover_offset bytes from the beginning of
startup_{32,64}.
+The boot loader MUST respect the kernel's PE/COFF metadata when it comes
+to section alignment, the memory footprint of the executable image beyond
+the size of the file itself, and any other aspect of the PE/COFF header
+that may affect correct operation of the image as a PE/COFF binary in the
+execution context provided by the EFI firmware.
+
The function prototype for the handover entry point looks like this::
efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp)
The boot loader *must* fill out the following fields in bp::
- - hdr.code32_start
- hdr.cmd_line_ptr
- hdr.ramdisk_image (if applicable)
- hdr.ramdisk_size (if applicable)
All other fields should be zero.
+
+NOTE: The EFI Handover Protocol is deprecated in favour of the ordinary PE/COFF
+ entry point, combined with the LINUX_EFI_INITRD_MEDIA_GUID based initrd
+ loading protocol (refer to [0] for an example of the bootloader side of
+ this), which removes the need for any knowledge on the part of the EFI
+ bootloader regarding the internal representation of boot_params or any
+ requirements/limitations regarding the placement of the command line
+ and ramdisk in memory, or the placement of the kernel image itself.
+
+[0] https://github.com/u-boot/u-boot/commit/ec80b4735a593961fe701cc3a5d717d4739b0fd0
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
F: Documentation/driver-api/80211/cfg80211.rst
ADM8211 WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
S: Orphan
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
F: drivers/net/wireless/admtek/adm8211.*
ADP1653 FLASH CONTROLLER DRIVER
F: drivers/input/misc/adxl34x.c
ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <michael.hennerich@analog.com>
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
F: drivers/net/ethernet/amd/xgbe/
ANALOG DEVICES INC AD5686 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: drivers/iio/dac/ad5696*
ANALOG DEVICES INC AD5758 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: drivers/iio/adc/ad7091r5.c
ANALOG DEVICES INC AD7124 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: drivers/iio/adc/ad7292.c
ANALOG DEVICES INC AD7606 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
M: Beniamin Bia <beniamin.bia@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
F: drivers/iio/adc/ad7606.c
ANALOG DEVICES INC AD7768-1 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: drivers/hwmon/adm1177.c
ANALOG DEVICES INC ADP5061 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
ANALOG DEVICES INC IIO DRIVERS
M: Lars-Peter Clausen <lars@metafoo.de>
M: Michael Hennerich <Michael.Hennerich@analog.com>
-M: Stefan Popa <stefan.popa@analog.com>
S: Supported
W: http://wiki.analog.com/
W: http://ez.analog.com/community/linux-device-drivers
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-F: Documentation/devicetree/bindings/arm/arm-boards
+F: Documentation/devicetree/bindings/arm/arm,integrator.yaml
+F: Documentation/devicetree/bindings/arm/arm,realview.yaml
+F: Documentation/devicetree/bindings/arm/arm,versatile.yaml
+F: Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
F: Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
F: Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
F: Documentation/devicetree/bindings/i2c/i2c-versatile.txt
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/en/users/Drivers/ath5k
+W: https://wireless.wiki.kernel.org/en/users/Drivers/ath5k
F: drivers/net/wireless/ath/ath5k/
ATHEROS ATH6KL WIRELESS DRIVER
M: Kalle Valo <kvalo@codeaurora.org>
L: linux-wireless@vger.kernel.org
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/ath6kl
+W: https://wireless.wiki.kernel.org/en/users/Drivers/ath6kl
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
F: drivers/net/wireless/ath/ath6kl/
L: linux-wireless@vger.kernel.org
L: b43-dev@lists.infradead.org
S: Odd Fixes
-W: http://wireless.kernel.org/en/users/Drivers/b43
+W: https://wireless.wiki.kernel.org/en/users/Drivers/b43
F: drivers/net/wireless/broadcom/b43/
B43LEGACY WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
L: b43-dev@lists.infradead.org
S: Maintained
-W: http://wireless.kernel.org/en/users/Drivers/b43
+W: https://wireless.wiki.kernel.org/en/users/Drivers/b43
F: drivers/net/wireless/broadcom/b43legacy/
BACKLIGHT CLASS/SUBSYSTEM
M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/en/users/Drivers/carl9170
+W: https://wireless.wiki.kernel.org/en/users/Drivers/carl9170
F: drivers/net/wireless/ath/carl9170/
CAVIUM I2C DRIVER
F: drivers/soc/fsl/dpio
DPAA2 ETHERNET DRIVER
+M: Ioana Ciornei <ioana.ciornei@nxp.com>
M: Ioana Radulescu <ruxandra.radulescu@nxp.com>
L: netdev@vger.kernel.org
S: Maintained
L: dri-devel@lists.freedesktop.org
S: Supported
T: git git://anongit.freedesktop.org/drm/drm-misc
-F: Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+F: Documentation/devicetree/bindings/display/allwinner*
F: drivers/gpu/drm/sun4i/
DRM DRIVERS FOR AMLOGIC SOCS
S: Maintained
F: include/linux/dim.h
F: lib/dim/
+F: Documentation/networking/net_dim.rst
DZ DECSTATION DZ11 SERIAL DRIVER
M: "Maciej W. Rozycki" <macro@linux-mips.org>
M: Janosch Frank <frankja@linux.ibm.com>
R: David Hildenbrand <david@redhat.com>
R: Cornelia Huck <cohuck@redhat.com>
+R: Claudio Imbrenda <imbrenda@linux.ibm.com>
L: kvm@vger.kernel.org
S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
F: include/uapi/linux/keyctl.h
F: security/keys/
+KFIFO
+M: Stefani Seibold <stefani@seibold.net>
+S: Maintained
+F: include/linux/kfifo.h
+F: lib/kfifo.c
+F: samples/kfifo/
+
KGDB / KDB /debug_core
M: Jason Wessel <jason.wessel@windriver.com>
M: Daniel Thompson <daniel.thompson@linaro.org>
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
F: Documentation/networking/mac80211-injection.txt
M: Felix Fietkau <nbd@nbd.name>
M: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
R: Ryder Lee <ryder.lee@mediatek.com>
-R: Roy Luo <royluo@google.com>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/mediatek/mt76/
ORINOCO DRIVER
L: linux-wireless@vger.kernel.org
S: Orphan
-W: http://wireless.kernel.org/en/users/Drivers/orinoco
+W: https://wireless.wiki.kernel.org/en/users/Drivers/orinoco
W: http://www.nongnu.org/orinoco/
F: drivers/net/wireless/intersil/orinoco/
M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/en/users/Drivers/p54
+W: https://wireless.wiki.kernel.org/en/users/Drivers/p54
F: drivers/net/wireless/intersil/p54/
PACKING
PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-R: Andrew Murray <amurray@thegoodpenguin.co.uk>
+R: Rob Herring <robh@kernel.org>
L: linux-pci@vger.kernel.org
S: Supported
Q: http://patchwork.ozlabs.org/project/linux-pci/list/
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-wireless@vger.kernel.org
S: Obsolete
-W: http://wireless.kernel.org/en/users/Drivers/p54
+W: https://wireless.wiki.kernel.org/en/users/Drivers/p54
F: drivers/net/wireless/intersil/prism54/
PROC FILESYSTEM
M: Kalle Valo <kvalo@codeaurora.org>
L: ath10k@lists.infradead.org
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/ath10k
+W: https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
F: drivers/net/wireless/ath/ath10k/
M: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
L: linux-wireless@vger.kernel.org
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/ath9k
+W: https://wireless.wiki.kernel.org/en/users/Drivers/ath9k
F: drivers/net/wireless/ath/ath9k/
QUALCOMM CAMERA SUBSYSTEM DRIVER
M: Kalle Valo <kvalo@codeaurora.org>
L: wcn36xx@lists.infradead.org
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/wcn36xx
+W: https://wireless.wiki.kernel.org/en/users/Drivers/wcn36xx
T: git git://github.com/KrasnikovEugene/wcn36xx.git
F: drivers/net/wireless/ath/wcn36xx/
QUANTENNA QTNFMAC WIRELESS DRIVER
M: Igor Mitsyanko <imitsyanko@quantenna.com>
-M: Avinash Patil <avinashp@quantenna.com>
M: Sergey Matyukevich <smatyukevich@quantenna.com>
L: linux-wireless@vger.kernel.org
S: Maintained
M: Ping-Ke Shih <pkshih@realtek.com>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
F: drivers/net/wireless/realtek/rtlwifi/
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
F: Documentation/ABI/stable/sysfs-class-rfkill
RTL8180 WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
S: Orphan
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
F: drivers/net/wireless/realtek/rtl818x/rtl8180/
M: Larry Finger <Larry.Finger@lwfinger.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
F: drivers/net/wireless/realtek/rtl818x/rtl8187/
TI WILINK WIRELESS DRIVERS
L: linux-wireless@vger.kernel.org
S: Orphan
-W: http://wireless.kernel.org/en/users/Drivers/wl12xx
-W: http://wireless.kernel.org/en/users/Drivers/wl1251
+W: https://wireless.wiki.kernel.org/en/users/Drivers/wl12xx
+W: https://wireless.wiki.kernel.org/en/users/Drivers/wl1251
T: git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
F: drivers/net/wireless/ti/
F: include/linux/wl12xx.h
L: linux-wireless@vger.kernel.org
L: wil6210@qti.qualcomm.com
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/wil6210
+W: https://wireless.wiki.kernel.org/en/users/Drivers/wil6210
F: drivers/net/wireless/ath/wil6210/
WIMAX STACK
VERSION = 5
PATCHLEVEL = 7
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* Amit Bhor, Sameer Dhavale: Codito Technologies 2004
-
*/
#ifndef _ASM_ARC_MODULE_H
const char *secstr;
};
-#define MODULE_PROC_FAMILY "ARC700"
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
#endif /* _ASM_ARC_MODULE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "ARC700"
+
+#endif /* _ASM_VERMAGIC_H */
@ running beyond the PoU, and so calling cache_off below from
@ inside the PE/COFF loader allocated region is unsafe unless
@ we explicitly clean it to the PoC.
- adr r0, call_cache_fn @ region of code we will
+ ARM( adrl r0, call_cache_fn )
+ THUMB( adr r0, call_cache_fn ) @ region of code we will
adr r1, 0f @ run with MMU off
bl cache_clean_flush
bl cache_off
soc {
firmware: firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
mboxes = <&mailbox>;
dma-ranges;
};
"dsi0_ddr2",
"dsi0_ddr";
+ status = "disabled";
};
aux: aux@7e215000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupt-names = "int0", "pps";
- interrupts-extended =
- <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
- <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+ <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET_REF>;
clock-names = "ipg", "ahb", "ptp";
+ gpr = <&gpr>;
status = "disabled";
};
};
&fec {
- /delete-property/interrupts-extended;
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
<0 119 IRQ_TYPE_LEVEL_HIGH>;
};
status = "disabled";
};
+/* RNG not directly accessible on N950/N9. */
+&rng_target {
+ status = "disabled";
+};
+
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
struct module;
u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val);
-/*
- * Add the ARM architecture version to the version magic string
- */
-#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
-
-/* Add __virt_to_phys patching state as well */
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
-#else
-#define MODULE_ARCH_VERMAGIC_P2V ""
-#endif
-
-/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
-#ifdef CONFIG_THUMB2_KERNEL
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
-#else
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
-#endif
-
-#define MODULE_ARCH_VERMAGIC \
- MODULE_ARCH_VERMAGIC_ARMVSN \
- MODULE_ARCH_VERMAGIC_ARMTHUMB \
- MODULE_ARCH_VERMAGIC_P2V
-
#ifdef CONFIG_THUMB2_KERNEL
#define HAVE_ARCH_KALLSYMS_SYMBOL_VALUE
static inline unsigned long kallsyms_symbol_value(const Elf_Sym *sym)
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+
+/*
+ * Add the ARM architecture version to the version magic string
+ */
+#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+
+/* Add __virt_to_phys patching state as well */
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
+#else
+#define MODULE_ARCH_VERMAGIC_P2V ""
+#endif
+
+/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
+#ifdef CONFIG_THUMB2_KERNEL
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
+#else
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+ MODULE_ARCH_VERMAGIC_ARMVSN \
+ MODULE_ARCH_VERMAGIC_ARMTHUMB \
+ MODULE_ARCH_VERMAGIC_P2V
+
+#endif /* _ASM_VERMAGIC_H */
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
+ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
+endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
rd = arm_bpf_get_reg64(dst, tmp, ctx);
/* Do LSR operation */
- if (val < 32) {
+ if (val == 0) {
+ /* An immediate value of 0 encodes a shift amount of 32
+ * for LSR. To shift by 0, don't do anything.
+ */
+ } else if (val < 32) {
emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_LSR, val), ctx);
rd = arm_bpf_get_reg64(dst, tmp, ctx);
/* Do ARSH operation */
- if (val < 32) {
+ if (val == 0) {
+ /* An immediate value of 0 encodes a shift amount of 32
+ * for ASR. To shift by 0, don't do anything.
+ */
+ } else if (val < 32) {
emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_ASR, val), ctx);
arm_bpf_put_reg32(dst_hi, rd[0], ctx);
}
+static bool is_ldst_imm(s16 off, const u8 size)
+{
+ s16 off_max = 0;
+
+ switch (size) {
+ case BPF_B:
+ case BPF_W:
+ off_max = 0xfff;
+ break;
+ case BPF_H:
+ off_max = 0xff;
+ break;
+ case BPF_DW:
+ /* Need to make sure off+4 does not overflow. */
+ off_max = 0xfff - 4;
+ break;
+ }
+ return -off_max <= off && off <= off_max;
+}
+
/* *(size *)(dst + off) = src */
static inline void emit_str_r(const s8 dst, const s8 src[],
- s32 off, struct jit_ctx *ctx, const u8 sz){
+ s16 off, struct jit_ctx *ctx, const u8 sz){
const s8 *tmp = bpf2a32[TMP_REG_1];
- s32 off_max;
s8 rd;
rd = arm_bpf_get_reg32(dst, tmp[1], ctx);
- if (sz == BPF_H)
- off_max = 0xff;
- else
- off_max = 0xfff;
-
- if (off < 0 || off > off_max) {
+ if (!is_ldst_imm(off, sz)) {
emit_a32_mov_i(tmp[0], off, ctx);
emit(ARM_ADD_R(tmp[0], tmp[0], rd), ctx);
rd = tmp[0];
/* dst = *(size*)(src + off) */
static inline void emit_ldx_r(const s8 dst[], const s8 src,
- s32 off, struct jit_ctx *ctx, const u8 sz){
+ s16 off, struct jit_ctx *ctx, const u8 sz){
const s8 *tmp = bpf2a32[TMP_REG_1];
const s8 *rd = is_stacked(dst_lo) ? tmp : dst;
s8 rm = src;
- s32 off_max;
-
- if (sz == BPF_H)
- off_max = 0xff;
- else
- off_max = 0xfff;
- if (off < 0 || off > off_max) {
+ if (!is_ldst_imm(off, sz)) {
emit_a32_mov_i(tmp[0], off, ctx);
emit(ARM_ADD_R(tmp[0], tmp[0], src), ctx);
rm = tmp[0];
#include <linux/mm.h>
-struct start_info _xen_start_info;
+static struct start_info _xen_start_info;
struct start_info *xen_start_info = &_xen_start_info;
EXPORT_SYMBOL(xen_start_info);
#include <asm-generic/module.h>
-#define MODULE_ARCH_VERMAGIC "aarch64"
-
#ifdef CONFIG_ARM64_MODULE_PLTS
struct mod_plt_sec {
int plt_shndx;
get_random_bytes(&keys->apga, sizeof(keys->apga));
}
-#define __ptrauth_key_install(k, v) \
+#define __ptrauth_key_install_nosync(k, v) \
do { \
struct ptrauth_key __pki_v = (v); \
write_sysreg_s(__pki_v.lo, SYS_ ## k ## KEYLO_EL1); \
static __always_inline void ptrauth_keys_switch_kernel(struct ptrauth_keys_kernel *keys)
{
- if (system_supports_address_auth())
- __ptrauth_key_install(APIA, keys->apia);
+ if (!system_supports_address_auth())
+ return;
+
+ __ptrauth_key_install_nosync(APIA, keys->apia);
+ isb();
}
extern int ptrauth_prctl_reset_keys(struct task_struct *tsk, unsigned long arg);
#ifndef CONFIG_BROKEN_GAS_INST
#ifdef __ASSEMBLY__
-#define __emit_inst(x) .inst (x)
+// The space separator is omitted so that __emit_inst(x) can be parsed as
+// either an assembler directive or an assembler macro argument.
+#define __emit_inst(x) .inst(x)
#else
#define __emit_inst(x) ".inst " __stringify((x)) "\n\t"
#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "aarch64"
+
+#endif /* _ASM_VERMAGIC_H */
if (ret)
return ret;
- ret = aarch32_alloc_kuser_vdso_page();
- if (ret) {
- unsigned long c_vvar =
- (unsigned long)page_to_virt(aarch32_vdso_pages[C_VVAR]);
- unsigned long c_vdso =
- (unsigned long)page_to_virt(aarch32_vdso_pages[C_VDSO]);
-
- free_page(c_vvar);
- free_page(c_vdso);
- }
-
- return ret;
+ return aarch32_alloc_kuser_vdso_page();
}
#else
static int __aarch32_alloc_vdso_pages(void)
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds
* Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*/
-#ifndef _ASM_MODULE_H
-#define _ASM_MODULE_H
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
-#include <asm-generic/module.h>
+#include <linux/stringify.h>
#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
-#endif
+#endif /* _ASM_VERMAGIC_H */
unsigned int next_got_entry; /* index of next available got entry */
};
-#define MODULE_PROC_FAMILY "ia64"
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY \
- "gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
-
#define ARCH_SHF_SMALL SHF_IA_64_SHORT
#endif /* _ASM_IA64_MODULE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+
+#define MODULE_ARCH_VERMAGIC "ia64" \
+ "gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
+
+#endif /* _ASM_VERMAGIC_H */
# SPDX-License-Identifier: GPL-2.0
generated-y += syscall_table.h
generic-y += extable.h
-generic-y += hardirq.h
generic-y += kvm_para.h
generic-y += local64.h
generic-y += mcs_spinlock.h
}
#endif
-#ifdef CONFIG_CPU_BMIPS
-#define MODULE_PROC_FAMILY "BMIPS "
-#elif defined CONFIG_CPU_MIPS32_R1
-#define MODULE_PROC_FAMILY "MIPS32_R1 "
-#elif defined CONFIG_CPU_MIPS32_R2
-#define MODULE_PROC_FAMILY "MIPS32_R2 "
-#elif defined CONFIG_CPU_MIPS32_R6
-#define MODULE_PROC_FAMILY "MIPS32_R6 "
-#elif defined CONFIG_CPU_MIPS64_R1
-#define MODULE_PROC_FAMILY "MIPS64_R1 "
-#elif defined CONFIG_CPU_MIPS64_R2
-#define MODULE_PROC_FAMILY "MIPS64_R2 "
-#elif defined CONFIG_CPU_MIPS64_R6
-#define MODULE_PROC_FAMILY "MIPS64_R6 "
-#elif defined CONFIG_CPU_R3000
-#define MODULE_PROC_FAMILY "R3000 "
-#elif defined CONFIG_CPU_TX39XX
-#define MODULE_PROC_FAMILY "TX39XX "
-#elif defined CONFIG_CPU_VR41XX
-#define MODULE_PROC_FAMILY "VR41XX "
-#elif defined CONFIG_CPU_R4X00
-#define MODULE_PROC_FAMILY "R4X00 "
-#elif defined CONFIG_CPU_TX49XX
-#define MODULE_PROC_FAMILY "TX49XX "
-#elif defined CONFIG_CPU_R5000
-#define MODULE_PROC_FAMILY "R5000 "
-#elif defined CONFIG_CPU_R5500
-#define MODULE_PROC_FAMILY "R5500 "
-#elif defined CONFIG_CPU_NEVADA
-#define MODULE_PROC_FAMILY "NEVADA "
-#elif defined CONFIG_CPU_R10000
-#define MODULE_PROC_FAMILY "R10000 "
-#elif defined CONFIG_CPU_RM7000
-#define MODULE_PROC_FAMILY "RM7000 "
-#elif defined CONFIG_CPU_SB1
-#define MODULE_PROC_FAMILY "SB1 "
-#elif defined CONFIG_CPU_LOONGSON32
-#define MODULE_PROC_FAMILY "LOONGSON32 "
-#elif defined CONFIG_CPU_LOONGSON2EF
-#define MODULE_PROC_FAMILY "LOONGSON2EF "
-#elif defined CONFIG_CPU_LOONGSON64
-#define MODULE_PROC_FAMILY "LOONGSON64 "
-#elif defined CONFIG_CPU_CAVIUM_OCTEON
-#define MODULE_PROC_FAMILY "OCTEON "
-#elif defined CONFIG_CPU_XLR
-#define MODULE_PROC_FAMILY "XLR "
-#elif defined CONFIG_CPU_XLP
-#define MODULE_PROC_FAMILY "XLP "
-#else
-#error MODULE_PROC_FAMILY undefined for your processor configuration
-#endif
-
-#ifdef CONFIG_32BIT
-#define MODULE_KERNEL_TYPE "32BIT "
-#elif defined CONFIG_64BIT
-#define MODULE_KERNEL_TYPE "64BIT "
-#endif
-
-#define MODULE_ARCH_VERMAGIC \
- MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
-
#endif /* _ASM_MODULE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_CPU_BMIPS
+#define MODULE_PROC_FAMILY "BMIPS "
+#elif defined CONFIG_CPU_MIPS32_R1
+#define MODULE_PROC_FAMILY "MIPS32_R1 "
+#elif defined CONFIG_CPU_MIPS32_R2
+#define MODULE_PROC_FAMILY "MIPS32_R2 "
+#elif defined CONFIG_CPU_MIPS32_R6
+#define MODULE_PROC_FAMILY "MIPS32_R6 "
+#elif defined CONFIG_CPU_MIPS64_R1
+#define MODULE_PROC_FAMILY "MIPS64_R1 "
+#elif defined CONFIG_CPU_MIPS64_R2
+#define MODULE_PROC_FAMILY "MIPS64_R2 "
+#elif defined CONFIG_CPU_MIPS64_R6
+#define MODULE_PROC_FAMILY "MIPS64_R6 "
+#elif defined CONFIG_CPU_R3000
+#define MODULE_PROC_FAMILY "R3000 "
+#elif defined CONFIG_CPU_TX39XX
+#define MODULE_PROC_FAMILY "TX39XX "
+#elif defined CONFIG_CPU_VR41XX
+#define MODULE_PROC_FAMILY "VR41XX "
+#elif defined CONFIG_CPU_R4X00
+#define MODULE_PROC_FAMILY "R4X00 "
+#elif defined CONFIG_CPU_TX49XX
+#define MODULE_PROC_FAMILY "TX49XX "
+#elif defined CONFIG_CPU_R5000
+#define MODULE_PROC_FAMILY "R5000 "
+#elif defined CONFIG_CPU_R5500
+#define MODULE_PROC_FAMILY "R5500 "
+#elif defined CONFIG_CPU_NEVADA
+#define MODULE_PROC_FAMILY "NEVADA "
+#elif defined CONFIG_CPU_R10000
+#define MODULE_PROC_FAMILY "R10000 "
+#elif defined CONFIG_CPU_RM7000
+#define MODULE_PROC_FAMILY "RM7000 "
+#elif defined CONFIG_CPU_SB1
+#define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_LOONGSON32
+#define MODULE_PROC_FAMILY "LOONGSON32 "
+#elif defined CONFIG_CPU_LOONGSON2EF
+#define MODULE_PROC_FAMILY "LOONGSON2EF "
+#elif defined CONFIG_CPU_LOONGSON64
+#define MODULE_PROC_FAMILY "LOONGSON64 "
+#elif defined CONFIG_CPU_CAVIUM_OCTEON
+#define MODULE_PROC_FAMILY "OCTEON "
+#elif defined CONFIG_CPU_XLR
+#define MODULE_PROC_FAMILY "XLR "
+#elif defined CONFIG_CPU_XLP
+#define MODULE_PROC_FAMILY "XLP "
+#else
+#error MODULE_PROC_FAMILY undefined for your processor configuration
+#endif
+
+#ifdef CONFIG_32BIT
+#define MODULE_KERNEL_TYPE "32BIT "
+#elif defined CONFIG_64BIT
+#define MODULE_KERNEL_TYPE "64BIT "
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+ MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
+
+#endif /* _ASM_VERMAGIC_H */
/* SPDX-License-Identifier: GPL-2.0 */
// Copyright (C) 2005-2017 Andes Technology Corporation
-#ifndef _ASM_NDS32_MODULE_H
-#define _ASM_NDS32_MODULE_H
-
-#include <asm-generic/module.h>
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
#define MODULE_ARCH_VERMAGIC "NDS32v3"
-#endif /* _ASM_NDS32_MODULE_H */
+#endif /* _ASM_VERMAGIC_H */
#define _ASM_POWERPC_MODULE_H
#ifdef __KERNEL__
-/*
- */
-
#include <linux/list.h>
#include <asm/bug.h>
#include <asm-generic/module.h>
-
-#ifdef CONFIG_MPROFILE_KERNEL
-#define MODULE_ARCH_VERMAGIC_FTRACE "mprofile-kernel "
-#else
-#define MODULE_ARCH_VERMAGIC_FTRACE ""
-#endif
-
-#ifdef CONFIG_RELOCATABLE
-#define MODULE_ARCH_VERMAGIC_RELOCATABLE "relocatable "
-#else
-#define MODULE_ARCH_VERMAGIC_RELOCATABLE ""
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_ARCH_VERMAGIC_FTRACE MODULE_ARCH_VERMAGIC_RELOCATABLE
-
#ifndef __powerpc64__
/*
* Thanks to Paul M for explaining this.
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_MPROFILE_KERNEL
+#define MODULE_ARCH_VERMAGIC_FTRACE "mprofile-kernel "
+#else
+#define MODULE_ARCH_VERMAGIC_FTRACE ""
+#endif
+
+#ifdef CONFIG_RELOCATABLE
+#define MODULE_ARCH_VERMAGIC_RELOCATABLE "relocatable "
+#else
+#define MODULE_ARCH_VERMAGIC_RELOCATABLE ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+ MODULE_ARCH_VERMAGIC_FTRACE MODULE_ARCH_VERMAGIC_RELOCATABLE
+
+#endif /* _ASM_VERMAGIC_H */
stw r10,_CCR(r1)
stw r1,KSP(r3) /* Set old stack pointer */
- kuap_check r2, r4
+ kuap_check r2, r0
#ifdef CONFIG_SMP
/* We need a sync somewhere here to make sure that if the
* previous task gets rescheduled on another CPU, it sees all
lsizep = of_get_property(np, propnames[3], NULL);
if (bsizep == NULL)
bsizep = lsizep;
+ if (lsizep == NULL)
+ lsizep = bsizep;
if (lsizep != NULL)
lsize = be32_to_cpu(*lsizep);
if (bsizep != NULL)
*/
local_irq_disable();
ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
+ pte = __pte(0);
+ if (ptep)
+ pte = *ptep;
+ local_irq_enable();
/*
* If the PTE disappeared temporarily due to a THP
* collapse, just return and let the guest try again.
*/
- if (!ptep) {
- local_irq_enable();
+ if (!pte_present(pte)) {
if (page)
put_page(page);
return RESUME_GUEST;
}
- pte = *ptep;
- local_irq_enable();
hpa = pte_pfn(pte) << PAGE_SHIFT;
pte_size = PAGE_SIZE;
if (shift)
*/
local_irq_disable();
ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
+ pte = __pte(0);
+ if (ptep)
+ pte = *ptep;
+ local_irq_enable();
/*
* If the PTE disappeared temporarily due to a THP
* collapse, just return and let the guest try again.
*/
- if (!ptep) {
- local_irq_enable();
+ if (!pte_present(pte)) {
if (page)
put_page(page);
return RESUME_GUEST;
}
- pte = *ptep;
- local_irq_enable();
/* If we're logging dirty pages, always map single pages */
large_enable = !(memslot->flags & KVM_MEM_LOG_DIRTY_PAGES);
mmu_mapin_ram_chunk(etext8, einittext8, PAGE_KERNEL);
}
}
+ _tlbil_all();
}
#ifdef CONFIG_STRICT_KERNEL_RWX
~(LARGE_PAGE_SIZE_8M - 1)));
mmu_patch_addis(&patch__dtlbmiss_romem_top, -__pa(_sinittext));
+ _tlbil_all();
+
/* Update page tables for PTDUMP and BDI */
mmu_mapin_ram_chunk(0, sinittext, __pgprot(0));
mmu_mapin_ram_chunk(0, etext, PAGE_KERNEL_ROX);
config PPC_KUAP_DEBUG
bool "Extra debugging for Kernel Userspace Access Protection"
- depends on PPC_KUAP && (PPC_RADIX_MMU || PPC_32)
+ depends on PPC_KUAP && (PPC_RADIX_MMU || PPC32)
help
Add extra debugging for Kernel Userspace Access Protection (KUAP)
If you're unsure, say N.
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_MMIOWB
select ARCH_HAS_DEBUG_VIRTUAL
- select HAVE_EBPF_JIT
+ select HAVE_EBPF_JIT if MMU
select EDAC_SUPPORT
select ARCH_HAS_GIGANTIC_PAGE
select ARCH_HAS_SET_DIRECT_MAP
select ARCH_HAS_SET_MEMORY
- select ARCH_HAS_STRICT_KERNEL_RWX
+ select ARCH_HAS_STRICT_KERNEL_RWX if MMU
select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
select SPARSEMEM_STATIC if 32BIT
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
#include <asm-generic/module.h>
-#define MODULE_ARCH_VERMAGIC "riscv"
-
struct module;
unsigned long module_emit_got_entry(struct module *mod, unsigned long val);
unsigned long module_emit_plt_entry(struct module *mod, unsigned long val);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2017 Andes Technology Corporation */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "riscv"
+
+#endif /* _ASM_VERMAGIC_H */
{
sbi_ecall(SBI_EXT_0_1_SHUTDOWN, 0, 0, 0, 0, 0, 0, 0);
}
-EXPORT_SYMBOL(sbi_set_timer);
+EXPORT_SYMBOL(sbi_shutdown);
/**
* sbi_clear_ipi() - Clear any pending IPIs for the calling hart.
{
sbi_ecall(SBI_EXT_0_1_CLEAR_IPI, 0, 0, 0, 0, 0, 0, 0);
}
-EXPORT_SYMBOL(sbi_shutdown);
+EXPORT_SYMBOL(sbi_clear_ipi);
/**
* sbi_set_timer_v01() - Program the timer for next timer event.
return result;
}
+
+static void sbi_set_power_off(void)
+{
+ pm_power_off = sbi_shutdown;
+}
#else
static void __sbi_set_timer_v01(uint64_t stime_value)
{
return 0;
}
+
+static void sbi_set_power_off(void) {}
#endif /* CONFIG_RISCV_SBI_V01 */
static void __sbi_set_timer_v02(uint64_t stime_value)
return __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_VERSION);
}
-static void sbi_power_off(void)
-{
- sbi_shutdown();
-}
int __init sbi_init(void)
{
int ret;
- pm_power_off = sbi_power_off;
+ sbi_set_power_off();
ret = sbi_get_spec_version();
if (ret > 0)
sbi_spec_version = ret;
#include <linux/stacktrace.h>
#include <linux/ftrace.h>
+register unsigned long sp_in_global __asm__("sp");
+
#ifdef CONFIG_FRAME_POINTER
struct stackframe {
unsigned long ra;
};
-register unsigned long sp_in_global __asm__("sp");
-
void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
bool (*fn)(unsigned long, void *), void *arg)
{
$(call if_changed,vdsold)
# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO. With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
+# table and layout of the linked DSO. With ld --just-symbols we can then
+# refer to these symbols in the kernel code rather than hand-coded addresses.
SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
-Wl,--build-id -Wl,--hash-style=both
$(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE
$(call if_changed,vdsold)
-LDFLAGS_vdso-syms.o := -r -R
+LDFLAGS_vdso-syms.o := -r --just-symbols
$(obj)/vdso-syms.o: $(obj)/vdso-dummy.o FORCE
$(call if_changed,ld)
return -(1L << 31) <= val && val < (1L << 31);
}
+static bool in_auipc_jalr_range(s64 val)
+{
+ /*
+ * auipc+jalr can reach any signed PC-relative offset in the range
+ * [-2^31 - 2^11, 2^31 - 2^11).
+ */
+ return (-(1L << 31) - (1L << 11)) <= val &&
+ val < ((1L << 31) - (1L << 11));
+}
+
static void emit_imm(u8 rd, s64 val, struct rv_jit_context *ctx)
{
/* Note that the immediate from the add is sign-extended,
*rd = RV_REG_T2;
}
-static void emit_jump_and_link(u8 rd, s64 rvoff, bool force_jalr,
- struct rv_jit_context *ctx)
+static int emit_jump_and_link(u8 rd, s64 rvoff, bool force_jalr,
+ struct rv_jit_context *ctx)
{
s64 upper, lower;
if (rvoff && is_21b_int(rvoff) && !force_jalr) {
emit(rv_jal(rd, rvoff >> 1), ctx);
- return;
+ return 0;
+ } else if (in_auipc_jalr_range(rvoff)) {
+ upper = (rvoff + (1 << 11)) >> 12;
+ lower = rvoff & 0xfff;
+ emit(rv_auipc(RV_REG_T1, upper), ctx);
+ emit(rv_jalr(rd, RV_REG_T1, lower), ctx);
+ return 0;
}
- upper = (rvoff + (1 << 11)) >> 12;
- lower = rvoff & 0xfff;
- emit(rv_auipc(RV_REG_T1, upper), ctx);
- emit(rv_jalr(rd, RV_REG_T1, lower), ctx);
+ pr_err("bpf-jit: target offset 0x%llx is out of range\n", rvoff);
+ return -ERANGE;
}
static bool is_signed_bpf_cond(u8 cond)
s64 off = 0;
u64 ip;
u8 rd;
+ int ret;
if (addr && ctx->insns) {
ip = (u64)(long)(ctx->insns + ctx->ninsns);
off = addr - ip;
- if (!is_32b_int(off)) {
- pr_err("bpf-jit: target call addr %pK is out of range\n",
- (void *)addr);
- return -ERANGE;
- }
}
- emit_jump_and_link(RV_REG_RA, off, !fixed, ctx);
+ ret = emit_jump_and_link(RV_REG_RA, off, !fixed, ctx);
+ if (ret)
+ return ret;
rd = bpf_to_rv_reg(BPF_REG_0, ctx);
emit(rv_addi(rd, RV_REG_A0, 0), ctx);
return 0;
{
bool is64 = BPF_CLASS(insn->code) == BPF_ALU64 ||
BPF_CLASS(insn->code) == BPF_JMP;
- int s, e, rvoff, i = insn - ctx->prog->insnsi;
+ int s, e, rvoff, ret, i = insn - ctx->prog->insnsi;
struct bpf_prog_aux *aux = ctx->prog->aux;
u8 rd = -1, rs = -1, code = insn->code;
s16 off = insn->off;
/* JUMP off */
case BPF_JMP | BPF_JA:
rvoff = rv_offset(i, off, ctx);
- emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+ ret = emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+ if (ret)
+ return ret;
break;
/* IF (dst COND src) JUMP off */
case BPF_JMP | BPF_CALL:
{
bool fixed;
- int ret;
u64 addr;
mark_call(ctx);
break;
rvoff = epilogue_offset(ctx);
- emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+ ret = emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+ if (ret)
+ return ret;
break;
/* dst = imm64 */
#ifdef CONFIG_PROTECTED_VIRTUALIZATION_GUEST
int __bootdata_preserved(prot_virt_guest);
#endif
-#if IS_ENABLED(CONFIG_KVM)
struct uv_info __bootdata_preserved(uv_info);
-#endif
void uv_query_info(void)
{
}
EXPORT_SYMBOL(diag_stat_inc);
-void diag_stat_inc_norecursion(enum diag_stat_enum nr)
+void notrace diag_stat_inc_norecursion(enum diag_stat_enum nr)
{
this_cpu_inc(diag_stat.counter[nr]);
trace_s390_diagnose_norecursion(diag_map[nr].code);
return -1;
}
-bool arch_vcpu_is_preempted(int cpu)
+bool notrace arch_vcpu_is_preempted(int cpu)
{
if (test_cpu_flag_of(CIF_ENABLED_WAIT, cpu))
return false;
}
EXPORT_SYMBOL(arch_vcpu_is_preempted);
-void smp_yield_cpu(int cpu)
+void notrace smp_yield_cpu(int cpu)
{
if (!MACHINE_HAS_DIAG9C)
return;
static DEFINE_PER_CPU(unsigned int, diagnose_trace_depth);
-void trace_s390_diagnose_norecursion(int diag_nr)
+void notrace trace_s390_diagnose_norecursion(int diag_nr)
{
unsigned long flags;
unsigned int *depth;
int __bootdata_preserved(prot_virt_guest);
#endif
+struct uv_info __bootdata_preserved(uv_info);
+
#if IS_ENABLED(CONFIG_KVM)
int prot_virt_host;
EXPORT_SYMBOL(prot_virt_host);
-struct uv_info __bootdata_preserved(uv_info);
EXPORT_SYMBOL(uv_info);
static int __init prot_virt_setup(char *val)
if (psw_mchk_disabled(vcpu))
active_mask &= ~IRQ_PEND_MCHK_MASK;
/* PV guest cpus can have a single interruption injected at a time. */
- if (kvm_s390_pv_cpu_is_protected(vcpu) &&
+ if (kvm_s390_pv_cpu_get_handle(vcpu) &&
vcpu->arch.sie_block->iictl != IICTL_CODE_NONE)
active_mask &= ~(IRQ_PEND_EXT_II_MASK |
IRQ_PEND_IO_MASK |
start = slot + 1;
}
+ if (start >= slots->used_slots)
+ return slots->used_slots - 1;
+
if (gfn >= memslots[start].base_gfn &&
gfn < memslots[start].base_gfn + memslots[start].npages) {
atomic_set(&slots->lru_slot, start);
{
mm_segment_t old_fs;
unsigned long asce, cr;
+ unsigned long flags;
old_fs = current->thread.mm_segment;
if (old_fs & 1)
return old_fs;
+ /* protect against a concurrent page table upgrade */
+ local_irq_save(flags);
current->thread.mm_segment |= 1;
asce = S390_lowcore.kernel_asce;
if (likely(old_fs == USER_DS)) {
__ctl_load(asce, 7, 7);
set_cpu_flag(CIF_ASCE_SECONDARY);
}
+ local_irq_restore(flags);
return old_fs;
}
EXPORT_SYMBOL(enable_sacf_uaccess);
{
struct mm_struct *mm = arg;
- if (current->active_mm == mm)
- set_user_asce(mm);
+ /* we must change all active ASCEs to avoid the creation of new TLBs */
+ if (current->active_mm == mm) {
+ S390_lowcore.user_asce = mm->context.asce;
+ if (current->thread.mm_segment == USER_DS) {
+ __ctl_load(S390_lowcore.user_asce, 1, 1);
+ /* Mark user-ASCE present in CR1 */
+ clear_cpu_flag(CIF_ASCE_PRIMARY);
+ }
+ if (current->thread.mm_segment == USER_DS_SACF) {
+ __ctl_load(S390_lowcore.user_asce, 7, 7);
+ /* enable_sacf_uaccess does all or nothing */
+ WARN_ON(!test_cpu_flag(CIF_ASCE_SECONDARY));
+ }
+ }
__tlb_flush_local();
}
.name = "PCI-MSI",
.irq_unmask = pci_msi_unmask_irq,
.irq_mask = pci_msi_mask_irq,
- .irq_set_affinity = zpci_set_irq_affinity,
};
static void zpci_handle_cpu_local_irq(bool rescan)
rc = -EIO;
if (hwirq - bit >= msi_vecs)
break;
- irq = __irq_alloc_descs(-1, 0, 1, 0, THIS_MODULE, msi->affinity);
+ irq = __irq_alloc_descs(-1, 0, 1, 0, THIS_MODULE,
+ (irq_delivery == DIRECTED) ?
+ msi->affinity : NULL);
if (irq < 0)
return -ENOMEM;
rc = irq_set_msi_desc(irq, msi);
};
#endif
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2LE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3LE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4LE "
-# elif defined CONFIG_CPU_SH5
-# define MODULE_PROC_FAMILY "SH5LE "
-# else
-# error unknown processor family
-# endif
-#else
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2BE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3BE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4BE "
-# elif defined CONFIG_CPU_SH5
-# define MODULE_PROC_FAMILY "SH5BE "
-# else
-# error unknown processor family
-# endif
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
#endif /* _ASM_SH_MODULE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# ifdef CONFIG_CPU_SH2
+# define MODULE_PROC_FAMILY "SH2LE "
+# elif defined CONFIG_CPU_SH3
+# define MODULE_PROC_FAMILY "SH3LE "
+# elif defined CONFIG_CPU_SH4
+# define MODULE_PROC_FAMILY "SH4LE "
+# elif defined CONFIG_CPU_SH5
+# define MODULE_PROC_FAMILY "SH5LE "
+# else
+# error unknown processor family
+# endif
+#else
+# ifdef CONFIG_CPU_SH2
+# define MODULE_PROC_FAMILY "SH2BE "
+# elif defined CONFIG_CPU_SH3
+# define MODULE_PROC_FAMILY "SH3BE "
+# elif defined CONFIG_CPU_SH4
+# define MODULE_PROC_FAMILY "SH4BE "
+# elif defined CONFIG_CPU_SH5
+# define MODULE_PROC_FAMILY "SH5BE "
+# else
+# error unknown processor family
+# endif
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* _ASM_VERMAGIC_H */
unsigned long nr_pages = size >> PAGE_SHIFT;
int ret;
- if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot)
+ if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
return -EINVAL;
/* We only have ZONE_NORMAL, so this is easy.. */
# When cleaning we don't include .config, so we don't include
# TT or skas makefiles and don't clean skas_ptregs.h.
CLEAN_FILES += linux x.i gmon.out
+MRPROPER_DIRS += arch/$(SUBARCH)/include/generated
archclean:
@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD if X86_64
- select HAVE_ARCH_USERFAULTFD_WP if USERFAULTFD
+ select HAVE_ARCH_USERFAULTFD_WP if X86_64 && USERFAULTFD
select HAVE_ARCH_VMAP_STACK if X86_64
select HAVE_ARCH_WITHIN_STACK_FRAMES
select HAVE_ASM_MODVERSIONS
X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS, &glm_cstates),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D, &glm_cstates),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT, &glm_cstates),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L, &glm_cstates),
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, &icl_cstates),
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE, &icl_cstates),
#include <linux/mm.h>
#include <linux/hyperv.h>
#include <linux/slab.h>
+#include <linux/kernel.h>
#include <linux/cpuhotplug.h>
#include <linux/syscore_ops.h>
#include <clocksource/hyperv_timer.h>
struct page *pg;
input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
- pg = alloc_page(GFP_KERNEL);
+ /* hv_cpu_init() can be called with IRQs disabled from hv_resume() */
+ pg = alloc_page(irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
if (unlikely(!pg))
return -ENOMEM;
*input_arg = page_address(pg);
static int hv_suspend(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
+ int ret;
/*
* Reset the hypercall page as it is going to be invalidated
hypercall_msr.enable = 0;
wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
- return 0;
+ ret = hv_cpu_die(0);
+ return ret;
}
static void hv_resume(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
+ int ret;
+
+ ret = hv_cpu_init(0);
+ WARN_ON(ret);
/* Re-enable the hypercall page */
rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
hv_hypercall_pg_saved = NULL;
}
+/* Note: when the ops are called, only CPU0 is online and IRQs are disabled. */
static struct syscore_ops hv_syscore_ops = {
.suspend = hv_suspend,
.resume = hv_resume,
}
EXPORT_SYMBOL_GPL(hyperv_cleanup);
-void hyperv_report_panic(struct pt_regs *regs, long err)
+void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die)
{
static bool panic_reported;
u64 guest_id;
+ if (in_die && !panic_on_oops)
+ return;
+
/*
* We prefer to report panic on 'die' chain as we have proper
* registers to report, but if we miss it (e.g. on BUG()) we need
extern pgd_t * __init efi_uv1_memmap_phys_prolog(void);
extern void __init efi_uv1_memmap_phys_epilog(pgd_t *save_pgd);
+/* kexec external ABI */
struct efi_setup_data {
u64 fw_vendor;
+ u64 __unused;
u64 tables;
u64 smbios;
u64 reserved[8];
unsigned int mpb[0];
};
-#define PATCH_MAX_SIZE PAGE_SIZE
+#define PATCH_MAX_SIZE (3 * PAGE_SIZE)
#ifdef CONFIG_MICROCODE_AMD
extern void __init load_ucode_amd_bsp(unsigned int family);
#endif
};
-#ifdef CONFIG_X86_64
-/* X86_64 does not define MODULE_PROC_FAMILY */
-#elif defined CONFIG_M486SX
-#define MODULE_PROC_FAMILY "486SX "
-#elif defined CONFIG_M486
-#define MODULE_PROC_FAMILY "486 "
-#elif defined CONFIG_M586
-#define MODULE_PROC_FAMILY "586 "
-#elif defined CONFIG_M586TSC
-#define MODULE_PROC_FAMILY "586TSC "
-#elif defined CONFIG_M586MMX
-#define MODULE_PROC_FAMILY "586MMX "
-#elif defined CONFIG_MCORE2
-#define MODULE_PROC_FAMILY "CORE2 "
-#elif defined CONFIG_MATOM
-#define MODULE_PROC_FAMILY "ATOM "
-#elif defined CONFIG_M686
-#define MODULE_PROC_FAMILY "686 "
-#elif defined CONFIG_MPENTIUMII
-#define MODULE_PROC_FAMILY "PENTIUMII "
-#elif defined CONFIG_MPENTIUMIII
-#define MODULE_PROC_FAMILY "PENTIUMIII "
-#elif defined CONFIG_MPENTIUMM
-#define MODULE_PROC_FAMILY "PENTIUMM "
-#elif defined CONFIG_MPENTIUM4
-#define MODULE_PROC_FAMILY "PENTIUM4 "
-#elif defined CONFIG_MK6
-#define MODULE_PROC_FAMILY "K6 "
-#elif defined CONFIG_MK7
-#define MODULE_PROC_FAMILY "K7 "
-#elif defined CONFIG_MK8
-#define MODULE_PROC_FAMILY "K8 "
-#elif defined CONFIG_MELAN
-#define MODULE_PROC_FAMILY "ELAN "
-#elif defined CONFIG_MCRUSOE
-#define MODULE_PROC_FAMILY "CRUSOE "
-#elif defined CONFIG_MEFFICEON
-#define MODULE_PROC_FAMILY "EFFICEON "
-#elif defined CONFIG_MWINCHIPC6
-#define MODULE_PROC_FAMILY "WINCHIPC6 "
-#elif defined CONFIG_MWINCHIP3D
-#define MODULE_PROC_FAMILY "WINCHIP3D "
-#elif defined CONFIG_MCYRIXIII
-#define MODULE_PROC_FAMILY "CYRIXIII "
-#elif defined CONFIG_MVIAC3_2
-#define MODULE_PROC_FAMILY "VIAC3-2 "
-#elif defined CONFIG_MVIAC7
-#define MODULE_PROC_FAMILY "VIAC7 "
-#elif defined CONFIG_MGEODEGX1
-#define MODULE_PROC_FAMILY "GEODEGX1 "
-#elif defined CONFIG_MGEODE_LX
-#define MODULE_PROC_FAMILY "GEODE "
-#else
-#error unknown processor family
-#endif
-
-#ifdef CONFIG_X86_32
-# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-#endif
-
#endif /* _ASM_X86_MODULE_H */
rdmsrl(HV_X64_MSR_SINT0 + int_num, val)
#define hv_set_synint_state(int_num, val) \
wrmsrl(HV_X64_MSR_SINT0 + int_num, val)
+#define hv_recommend_using_aeoi() \
+ (!(ms_hyperv.hints & HV_DEPRECATING_AEOI_RECOMMENDED))
#define hv_get_crash_ctl(val) \
rdmsrl(HV_X64_MSR_CRASH_CTL, val)
extern char __indirect_thunk_start[];
extern char __indirect_thunk_end[];
-/*
- * On VMEXIT we must ensure that no RSB predictions learned in the guest
- * can be followed in the host, by overwriting the RSB completely. Both
- * retpoline and IBRS mitigations for Spectre v2 need this; only on future
- * CPUs with IBRS_ALL *might* it be avoided.
- */
-static inline void vmexit_fill_RSB(void)
-{
-#ifdef CONFIG_RETPOLINE
- unsigned long loops;
-
- asm volatile (ANNOTATE_NOSPEC_ALTERNATIVE
- ALTERNATIVE("jmp 910f",
- __stringify(__FILL_RETURN_BUFFER(%0, RSB_CLEAR_LOOPS, %1)),
- X86_FEATURE_RETPOLINE)
- "910:"
- : "=r" (loops), ASM_CALL_CONSTRAINT
- : : "memory" );
-#endif
-}
-
static __always_inline
void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
{
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_X86_64
+/* X86_64 does not define MODULE_PROC_FAMILY */
+#elif defined CONFIG_M486SX
+#define MODULE_PROC_FAMILY "486SX "
+#elif defined CONFIG_M486
+#define MODULE_PROC_FAMILY "486 "
+#elif defined CONFIG_M586
+#define MODULE_PROC_FAMILY "586 "
+#elif defined CONFIG_M586TSC
+#define MODULE_PROC_FAMILY "586TSC "
+#elif defined CONFIG_M586MMX
+#define MODULE_PROC_FAMILY "586MMX "
+#elif defined CONFIG_MCORE2
+#define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_MATOM
+#define MODULE_PROC_FAMILY "ATOM "
+#elif defined CONFIG_M686
+#define MODULE_PROC_FAMILY "686 "
+#elif defined CONFIG_MPENTIUMII
+#define MODULE_PROC_FAMILY "PENTIUMII "
+#elif defined CONFIG_MPENTIUMIII
+#define MODULE_PROC_FAMILY "PENTIUMIII "
+#elif defined CONFIG_MPENTIUMM
+#define MODULE_PROC_FAMILY "PENTIUMM "
+#elif defined CONFIG_MPENTIUM4
+#define MODULE_PROC_FAMILY "PENTIUM4 "
+#elif defined CONFIG_MK6
+#define MODULE_PROC_FAMILY "K6 "
+#elif defined CONFIG_MK7
+#define MODULE_PROC_FAMILY "K7 "
+#elif defined CONFIG_MK8
+#define MODULE_PROC_FAMILY "K8 "
+#elif defined CONFIG_MELAN
+#define MODULE_PROC_FAMILY "ELAN "
+#elif defined CONFIG_MCRUSOE
+#define MODULE_PROC_FAMILY "CRUSOE "
+#elif defined CONFIG_MEFFICEON
+#define MODULE_PROC_FAMILY "EFFICEON "
+#elif defined CONFIG_MWINCHIPC6
+#define MODULE_PROC_FAMILY "WINCHIPC6 "
+#elif defined CONFIG_MWINCHIP3D
+#define MODULE_PROC_FAMILY "WINCHIP3D "
+#elif defined CONFIG_MCYRIXIII
+#define MODULE_PROC_FAMILY "CYRIXIII "
+#elif defined CONFIG_MVIAC3_2
+#define MODULE_PROC_FAMILY "VIAC3-2 "
+#elif defined CONFIG_MVIAC7
+#define MODULE_PROC_FAMILY "VIAC7 "
+#elif defined CONFIG_MGEODEGX1
+#define MODULE_PROC_FAMILY "GEODEGX1 "
+#elif defined CONFIG_MGEODE_LX
+#define MODULE_PROC_FAMILY "GEODE "
+#else
+#error unknown processor family
+#endif
+
+#ifdef CONFIG_X86_32
+# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+#else
+# define MODULE_ARCH_VERMAGIC ""
+#endif
+
+#endif /* _ASM_VERMAGIC_H */
sld_update_msr(!(tifn & _TIF_SLD));
}
-#define SPLIT_LOCK_CPU(model) {X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY}
-
/*
- * The following processors have the split lock detection feature. But
- * since they don't have the IA32_CORE_CAPABILITIES MSR, the feature cannot
- * be enumerated. Enable it by family and model matching on these
- * processors.
+ * Bits in the IA32_CORE_CAPABILITIES are not architectural, so they should
+ * only be trusted if it is confirmed that a CPU model implements a
+ * specific feature at a particular bit position.
+ *
+ * The possible driver data field values:
+ *
+ * - 0: CPU models that are known to have the per-core split-lock detection
+ * feature even though they do not enumerate IA32_CORE_CAPABILITIES.
+ *
+ * - 1: CPU models which may enumerate IA32_CORE_CAPABILITIES and if so use
+ * bit 5 to enumerate the per-core split-lock detection feature.
*/
static const struct x86_cpu_id split_lock_cpu_ids[] __initconst = {
- SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_X),
- SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_L),
+ X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, 0),
+ X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, 0),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT, 1),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D, 1),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L, 1),
{}
};
void __init cpu_set_core_cap_bits(struct cpuinfo_x86 *c)
{
- u64 ia32_core_caps = 0;
+ const struct x86_cpu_id *m;
+ u64 ia32_core_caps;
+
+ if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
+ return;
- if (c->x86_vendor != X86_VENDOR_INTEL)
+ m = x86_match_cpu(split_lock_cpu_ids);
+ if (!m)
return;
- if (cpu_has(c, X86_FEATURE_CORE_CAPABILITIES)) {
- /* Enumerate features reported in IA32_CORE_CAPABILITIES MSR. */
+
+ switch (m->driver_data) {
+ case 0:
+ break;
+ case 1:
+ if (!cpu_has(c, X86_FEATURE_CORE_CAPABILITIES))
+ return;
rdmsrl(MSR_IA32_CORE_CAPS, ia32_core_caps);
- } else if (!boot_cpu_has(X86_FEATURE_HYPERVISOR)) {
- /* Enumerate split lock detection by family and model. */
- if (x86_match_cpu(split_lock_cpu_ids))
- ia32_core_caps |= MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT;
+ if (!(ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT))
+ return;
+ break;
+ default:
+ return;
}
- if (ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT)
- split_lock_setup();
+ split_lock_setup();
}
ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES);
ms_hyperv.hints = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);
- pr_info("Hyper-V: features 0x%x, hints 0x%x\n",
- ms_hyperv.features, ms_hyperv.hints);
+ pr_info("Hyper-V: features 0x%x, hints 0x%x, misc 0x%x\n",
+ ms_hyperv.features, ms_hyperv.hints, ms_hyperv.misc_features);
ms_hyperv.max_vp_index = cpuid_eax(HYPERV_CPUID_IMPLEMENT_LIMITS);
ms_hyperv.max_lp_index = cpuid_ebx(HYPERV_CPUID_IMPLEMENT_LIMITS);
cpuid_eax(HYPERV_CPUID_NESTED_FEATURES);
}
+ /*
+ * Hyper-V expects to get crash register data or kmsg when
+ * crash enlightment is available and system crashes. Set
+ * crash_kexec_post_notifiers to be true to make sure that
+ * calling crash enlightment interface before running kdump
+ * kernel.
+ */
+ if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE)
+ crash_kexec_post_notifiers = true;
+
#ifdef CONFIG_X86_LOCAL_APIC
if (ms_hyperv.features & HV_X64_ACCESS_FREQUENCY_MSRS &&
ms_hyperv.misc_features & HV_FEATURE_FREQUENCY_MSRS_AVAILABLE) {
d->id = id;
cpumask_set_cpu(cpu, &d->cpu_mask);
+ rdt_domain_reconfigure_cdp(r);
+
if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
kfree(d);
return;
void __check_limbo(struct rdt_domain *d, bool force_free);
bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r);
bool cbm_validate_amd(char *buf, u32 *data, struct rdt_resource *r);
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
#endif /* _ASM_X86_RESCTRL_INTERNAL_H */
return 0;
}
+/* Restore the qos cfg state when a domain comes online */
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r)
+{
+ if (!r->alloc_capable)
+ return;
+
+ if (r == &rdt_resources_all[RDT_RESOURCE_L2DATA])
+ l2_qos_cfg_update(&r->alloc_enabled);
+
+ if (r == &rdt_resources_all[RDT_RESOURCE_L3DATA])
+ l3_qos_cfg_update(&r->alloc_enabled);
+}
+
/*
* Enable or disable the MBA software controller
* which helps user specify bandwidth in MBps.
* If the rdtgroup is a mon group and parent directory
* is a valid "mon_groups" directory, remove the mon group.
*/
- if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn) {
+ if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn &&
+ rdtgrp != &rdtgroup_default) {
if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP ||
rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED) {
ret = rdtgroup_ctrl_remove(kn, rdtgrp);
*((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
}
-static void init_freq_invariance(void);
+static void init_freq_invariance(bool secondary);
/*
* Report back to the Boot Processor during boot time or to the caller processor
*/
set_cpu_sibling_map(raw_smp_processor_id());
- init_freq_invariance();
+ init_freq_invariance(true);
/*
* Get our bogomips.
set_sched_topology(x86_topology);
set_cpu_sibling_map(0);
- init_freq_invariance();
+ init_freq_invariance(false);
smp_sanity_check();
switch (apic_intr_mode) {
int err, i;
u64 msr;
- if (!x86_match_cpu(has_knl_turbo_ratio_limits))
- return false;
-
err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq);
if (err)
return false;
static bool core_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq)
{
+ u64 msr;
int err;
err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq);
if (err)
return false;
- err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, turbo_freq);
+ err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, &msr);
if (err)
return false;
- *base_freq = (*base_freq >> 8) & 0xFF; /* max P state */
- *turbo_freq = (*turbo_freq >> 24) & 0xFF; /* 4C turbo */
+ *base_freq = (*base_freq >> 8) & 0xFF; /* max P state */
+ *turbo_freq = (msr >> 24) & 0xFF; /* 4C turbo */
+
+ /* The CPU may have less than 4 cores */
+ if (!*turbo_freq)
+ *turbo_freq = msr & 0xFF; /* 1C turbo */
return true;
}
skx_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
goto out;
- if (knl_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
+ if (x86_match_cpu(has_knl_turbo_ratio_limits) &&
+ knl_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
goto out;
if (x86_match_cpu(has_skx_turbo_ratio_limits) &&
return false;
out:
+ /*
+ * Some hypervisors advertise X86_FEATURE_APERFMPERF
+ * but then fill all MSR's with zeroes.
+ */
+ if (!base_freq) {
+ pr_debug("Couldn't determine cpu base frequency, necessary for scale-invariant accounting.\n");
+ return false;
+ }
+
arch_turbo_freq_ratio = div_u64(turbo_freq * SCHED_CAPACITY_SCALE,
base_freq);
arch_set_max_freq_ratio(turbo_disabled());
return true;
}
-static void init_counter_refs(void *arg)
+static void init_counter_refs(void)
{
u64 aperf, mperf;
this_cpu_write(arch_prev_mperf, mperf);
}
-static void init_freq_invariance(void)
+static void init_freq_invariance(bool secondary)
{
bool ret = false;
- if (smp_processor_id() != 0 || !boot_cpu_has(X86_FEATURE_APERFMPERF))
+ if (!boot_cpu_has(X86_FEATURE_APERFMPERF))
return;
+ if (secondary) {
+ if (static_branch_likely(&arch_scale_freq_key)) {
+ init_counter_refs();
+ }
+ return;
+ }
+
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
ret = intel_set_max_freq_ratio();
if (ret) {
- on_each_cpu(init_counter_refs, NULL, 1);
+ init_counter_refs();
static_branch_enable(&arch_scale_freq_key);
} else {
pr_debug("Couldn't determine max cpu frequency, necessary for scale-invariant accounting.\n");
#define UMIP_INST_SLDT 3 /* 0F 00 /0 */
#define UMIP_INST_STR 4 /* 0F 00 /1 */
-const char * const umip_insns[5] = {
+static const char * const umip_insns[5] = {
[UMIP_INST_SGDT] = "SGDT",
[UMIP_INST_SIDT] = "SIDT",
[UMIP_INST_SMSW] = "SMSW",
ccflags-y += -Iarch/x86/kvm
ccflags-$(CONFIG_KVM_WERROR) += -Werror
+ifeq ($(CONFIG_FRAME_POINTER),y)
+OBJECT_FILES_NON_STANDARD_vmenter.o := y
+endif
+
KVM := ../../../virt/kvm
kvm-y += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \
#include <linux/kernel.h>
#include <linux/highmem.h>
#include <linux/psp-sev.h>
+#include <linux/pagemap.h>
#include <linux/swap.h>
#include "x86.h"
/* Maximum number of encrypted guests supported simultaneously */
max_sev_asid = cpuid_ecx(0x8000001F);
- if (!max_sev_asid)
+ if (!svm_sev_enabled())
return 1;
/* Minimum ASID value that should be used for SEV guest */
void sev_hardware_teardown(void)
{
+ if (!svm_sev_enabled())
+ return;
+
bitmap_free(sev_asid_bitmap);
bitmap_free(sev_reclaim_asid_bitmap);
svm_complete_interrupts(svm);
}
-bool __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
+void __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
static void svm_vcpu_run(struct kvm_vcpu *vcpu)
{
*/
x86_spec_ctrl_set_guest(svm->spec_ctrl, svm->virt_spec_ctrl);
- local_irq_enable();
-
__svm_vcpu_run(svm->vmcb_pa, (unsigned long *)&svm->vcpu.arch.regs);
- /* Eliminate branch target predictions from guest mode */
- vmexit_fill_RSB();
-
#ifdef CONFIG_X86_64
wrmsrl(MSR_GS_BASE, svm->host.gs_base);
#else
reload_tss(vcpu);
- local_irq_disable();
-
x86_spec_ctrl_restore_host(svm->spec_ctrl, svm->virt_spec_ctrl);
vcpu->arch.cr2 = svm->vmcb->save.cr2;
mark_all_clean(svm->vmcb);
}
-STACK_FRAME_NON_STANDARD(svm_vcpu_run);
static void svm_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long root)
{
#include <asm/asm.h>
#include <asm/bitsperlong.h>
#include <asm/kvm_vcpu_regs.h>
+#include <asm/nospec-branch.h>
#define WORD_SIZE (BITS_PER_LONG / 8)
*/
SYM_FUNC_START(__svm_vcpu_run)
push %_ASM_BP
- mov %_ASM_SP, %_ASM_BP
#ifdef CONFIG_X86_64
push %r15
push %r14
pop %_ASM_AX
/* Enter guest mode */
+ sti
1: vmload %_ASM_AX
jmp 3f
2: cmpb $0, kvm_rebooting
ud2
_ASM_EXTABLE(5b, 6b)
7:
+ cli
+
+#ifdef CONFIG_RETPOLINE
+ /* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */
+ FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
+#endif
+
/* "POP" @regs to RAX. */
pop %_ASM_AX
return 1 & (b >> (field & 7));
}
+static bool nested_vmx_exit_handled_mtf(struct vmcs12 *vmcs12)
+{
+ u32 entry_intr_info = vmcs12->vm_entry_intr_info_field;
+
+ if (nested_cpu_has_mtf(vmcs12))
+ return true;
+
+ /*
+ * An MTF VM-exit may be injected into the guest by setting the
+ * interruption-type to 7 (other event) and the vector field to 0. Such
+ * is the case regardless of the 'monitor trap flag' VM-execution
+ * control.
+ */
+ return entry_intr_info == (INTR_INFO_VALID_MASK
+ | INTR_TYPE_OTHER_EVENT);
+}
+
/*
- * Return 1 if we should exit from L2 to L1 to handle an exit, or 0 if we
+ * Return true if we should exit from L2 to L1 to handle an exit, or false if we
* should handle it ourselves in L0 (and then continue L2). Only call this
* when in is_guest_mode (L2).
*/
case EXIT_REASON_MWAIT_INSTRUCTION:
return nested_cpu_has(vmcs12, CPU_BASED_MWAIT_EXITING);
case EXIT_REASON_MONITOR_TRAP_FLAG:
- return nested_cpu_has_mtf(vmcs12);
+ return nested_vmx_exit_handled_mtf(vmcs12);
case EXIT_REASON_MONITOR_INSTRUCTION:
return nested_cpu_has(vmcs12, CPU_BASED_MONITOR_EXITING);
case EXIT_REASON_PAUSE_INSTRUCTION:
*/
static void kvm_machine_check(void)
{
-#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_MCE)
struct pt_regs regs = {
.cs = 3, /* Fake ring 3 no matter what the guest ran on */
.flags = X86_EFLAGS_IF,
case MSR_IA32_PERF_CTL:
case MSR_AMD64_DC_CFG:
case MSR_F15H_EX_CFG:
+ /*
+ * Intel Sandy Bridge CPUs must support the RAPL (running average power
+ * limit) MSRs. Just return 0, as we do not want to expose the host
+ * data here. Do not conditionalize this on CPUID, as KVM does not do
+ * so for existing CPU-specific MSRs.
+ */
+ case MSR_RAPL_POWER_UNIT:
+ case MSR_PP0_ENERGY_STATUS: /* Power plane 0 (core) */
+ case MSR_PP1_ENERGY_STATUS: /* Power plane 1 (graphics uncore) */
+ case MSR_PKG_ENERGY_STATUS: /* Total package */
+ case MSR_DRAM_ENERGY_STATUS: /* DRAM controller */
msr_info->data = 0;
break;
case MSR_F15H_PERF_CTL0 ... MSR_F15H_PERF_CTR5:
r = -EFAULT;
if (copy_from_user(&u.ps, argp, sizeof(u.ps)))
goto out;
+ mutex_lock(&kvm->lock);
r = -ENXIO;
if (!kvm->arch.vpit)
- goto out;
+ goto set_pit_out;
r = kvm_vm_ioctl_set_pit(kvm, &u.ps);
+set_pit_out:
+ mutex_unlock(&kvm->lock);
break;
}
case KVM_GET_PIT2: {
r = -EFAULT;
if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
goto out;
+ mutex_lock(&kvm->lock);
r = -ENXIO;
if (!kvm->arch.vpit)
- goto out;
+ goto set_pit2_out;
r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+set_pit2_out:
+ mutex_unlock(&kvm->lock);
break;
}
case KVM_REINJECT_CONTROL: {
BIT(BPF_REG_AX));
}
+/*
+ * is_ereg_8l() == true if BPF register 'reg' is mapped to access x86-64
+ * lower 8-bit registers dil,sil,bpl,spl,r8b..r15b, which need extra byte
+ * of encoding. al,cl,dl,bl have simpler encoding.
+ */
+static bool is_ereg_8l(u32 reg)
+{
+ return is_ereg(reg) ||
+ (1 << reg) & (BIT(BPF_REG_1) |
+ BIT(BPF_REG_2) |
+ BIT(BPF_REG_FP));
+}
+
static bool is_axreg(u32 reg)
{
return reg == BPF_REG_0;
switch (size) {
case BPF_B:
/* Emit 'mov byte ptr [rax + off], al' */
- if (is_ereg(dst_reg) || is_ereg(src_reg) ||
- /* We have to add extra byte for x86 SIL, DIL regs */
- src_reg == BPF_REG_1 || src_reg == BPF_REG_2)
+ if (is_ereg(dst_reg) || is_ereg_8l(src_reg))
+ /* Add extra byte for eregs or SIL,DIL,BPL in src_reg */
EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x88);
else
EMIT1(0x88);
case BPF_B:
case BPF_H:
case BPF_W:
- if (!bpf_prog->aux->verifier_zext)
+ if (bpf_prog->aux->verifier_zext)
break;
if (dstk) {
EMIT3(0xC7, add_1reg(0x40, IA32_EBP),
STACK_VAR(dst_hi));
EMIT(0x0, 4);
} else {
- EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);
+ /* xor dst_hi,dst_hi */
+ EMIT2(0x33,
+ add_2reg(0xC0, dst_hi, dst_hi));
}
break;
case BPF_DW:
case BPF_JMP | BPF_JSET | BPF_X:
case BPF_JMP32 | BPF_JSET | BPF_X: {
bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
- u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
- u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+ u8 dreg_lo = IA32_EAX;
+ u8 dreg_hi = IA32_EDX;
u8 sreg_lo = sstk ? IA32_ECX : src_lo;
u8 sreg_hi = sstk ? IA32_EBX : src_hi;
add_2reg(0x40, IA32_EBP,
IA32_EDX),
STACK_VAR(dst_hi));
+ } else {
+ /* mov dreg_lo,dst_lo */
+ EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+ if (is_jmp64)
+ /* mov dreg_hi,dst_hi */
+ EMIT2(0x89,
+ add_2reg(0xC0, dreg_hi, dst_hi));
}
if (sstk) {
case BPF_JMP | BPF_JSET | BPF_K:
case BPF_JMP32 | BPF_JSET | BPF_K: {
bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
- u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
- u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+ u8 dreg_lo = IA32_EAX;
+ u8 dreg_hi = IA32_EDX;
u8 sreg_lo = IA32_ECX;
u8 sreg_hi = IA32_EBX;
u32 hi;
add_2reg(0x40, IA32_EBP,
IA32_EDX),
STACK_VAR(dst_hi));
+ } else {
+ /* mov dreg_lo,dst_lo */
+ EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+ if (is_jmp64)
+ /* mov dreg_hi,dst_hi */
+ EMIT2(0x89,
+ add_2reg(0xC0, dreg_hi, dst_hi));
}
/* mov ecx,imm32 */
int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
{
- unsigned long pfn, text, pf;
+ unsigned long pfn, text, pf, rodata;
struct page *page;
unsigned npages;
pgd_t *pgd = efi_mm.pgd;
efi_scratch.phys_stack = page_to_phys(page + 1); /* stack grows down */
- npages = (__end_rodata_aligned - _text) >> PAGE_SHIFT;
+ npages = (_etext - _text) >> PAGE_SHIFT;
text = __pa(_text);
pfn = text >> PAGE_SHIFT;
return 1;
}
+ npages = (__end_rodata - __start_rodata) >> PAGE_SHIFT;
+ rodata = __pa(__start_rodata);
+ pfn = rodata >> PAGE_SHIFT;
+ if (kernel_map_pages_in_pgd(pgd, pfn, rodata, npages, pf)) {
+ pr_err("Failed to map kernel rodata 1:1\n");
+ return 1;
+ }
+
return 0;
}
phys_vendor = virt_to_phys_or_null(vnd);
phys_data = virt_to_phys_or_null_size(data, data_size);
- if (!phys_name || !phys_data)
+ if (!phys_name || (data && !phys_data))
status = EFI_INVALID_PARAMETER;
else
status = efi_thunk(set_variable, phys_name, phys_vendor,
phys_vendor = virt_to_phys_or_null(vnd);
phys_data = virt_to_phys_or_null_size(data, data_size);
- if (!phys_name || !phys_data)
+ if (!phys_name || (data && !phys_data))
status = EFI_INVALID_PARAMETER;
else
status = efi_thunk(set_variable, phys_name, phys_vendor,
/*
- * include/asm-xtensa/module.h
- *
- * This file contains the module code specific to the Xtensa architecture.
- *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
-#ifndef _XTENSA_MODULE_H
-#define _XTENSA_MODULE_H
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
-#define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " "
+#include <linux/stringify.h>
+#include <variant/core.h>
-#include <asm-generic/module.h>
+#define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " "
-#endif /* _XTENSA_MODULE_H */
+#endif /* _ASM_VERMAGIC_H */
vrate_min, vrate_max);
}
- trace_iocost_ioc_vrate_adj(ioc, vrate, &missed_ppm, rq_wait_pct,
+ trace_iocost_ioc_vrate_adj(ioc, vrate, missed_ppm, rq_wait_pct,
nr_lagging, nr_shortages,
nr_surpluses);
ioc->period_us * vrate * INUSE_MARGIN_PCT, 100);
} else if (ioc->busy_level != prev_busy_level || nr_lagging) {
trace_iocost_ioc_vrate_adj(ioc, atomic64_read(&ioc->vtime_rate),
- &missed_ppm, rq_wait_pct, nr_lagging,
+ missed_ppm, rq_wait_pct, nr_lagging,
nr_shortages, nr_surpluses);
}
rq = list_first_entry(list, struct request, queuelist);
hctx = rq->mq_hctx;
- if (!got_budget && !blk_mq_get_dispatch_budget(hctx))
+ if (!got_budget && !blk_mq_get_dispatch_budget(hctx)) {
+ blk_mq_put_driver_tag(rq);
break;
+ }
if (!blk_mq_get_driver_tag(rq)) {
/*
calc_wb_limits(rwb);
rwb->unknown_cnt = 0;
rwb_wake_all(rwb);
- rwb_trace_step(rwb, "scale up");
+ rwb_trace_step(rwb, tracepoint_string("scale up"));
}
static void scale_down(struct rq_wb *rwb, bool hard_throttle)
return;
calc_wb_limits(rwb);
rwb->unknown_cnt = 0;
- rwb_trace_step(rwb, "scale down");
+ rwb_trace_step(rwb, tracepoint_string("scale down"));
}
static void rwb_arm_timer(struct rq_wb *rwb)
.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED,
},
{
- /*
- * Asus T200TA, _LID keeps reporting closed after every second
- * openening of the lid. Causing immediate re-suspend after
- * opening every other open. Using LID_INIT_OPEN fixes this.
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
- },
- .driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
- },
- {
/* GP-electronic T701, _LID method points to a floating GPIO */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
resource->res.data.extended_irq.polarity =
link->irq.polarity;
if (link->irq.triggering == ACPI_EDGE_SENSITIVE)
- resource->res.data.irq.shareable =
+ resource->res.data.extended_irq.shareable =
ACPI_EXCLUSIVE;
else
- resource->res.data.irq.shareable = ACPI_SHARED;
+ resource->res.data.extended_irq.shareable = ACPI_SHARED;
resource->res.data.extended_irq.interrupt_count = 1;
resource->res.data.extended_irq.interrupts[0] = irq;
/* ignore resource_source, it's optional */
{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */
{ PCI_VDEVICE(INTEL, 0x5ae3), board_ahci_mobile }, /* ApolloLake AHCI */
{ PCI_VDEVICE(INTEL, 0x34d3), board_ahci_mobile }, /* Ice Lake LP AHCI */
+ { PCI_VDEVICE(INTEL, 0x02d3), board_ahci_mobile }, /* Comet Lake PCH-U AHCI */
{ PCI_VDEVICE(INTEL, 0x02d7), board_ahci_mobile }, /* Comet Lake PCH RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
/* PORT_IDMA_CTL bits */
IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */
- IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
+ IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinery */
IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
},
{ }
};
-EXPORT_SYMBOL_GPL(firmware_config_table);
#endif
if (is_async(dev)) {
get_device(dev);
- async_schedule(func, dev);
+ async_schedule_dev(func, dev);
return true;
}
char disk_name[DISK_NAME_LEN];
};
+blk_status_t null_process_cmd(struct nullb_cmd *cmd,
+ enum req_opf op, sector_t sector,
+ unsigned int nr_sectors);
+
#ifdef CONFIG_BLK_DEV_ZONED
-int null_zone_init(struct nullb_device *dev);
-void null_zone_exit(struct nullb_device *dev);
+int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q);
+int null_register_zoned_dev(struct nullb *nullb);
+void null_free_zoned_dev(struct nullb_device *dev);
int null_report_zones(struct gendisk *disk, sector_t sector,
unsigned int nr_zones, report_zones_cb cb, void *data);
-blk_status_t null_handle_zoned(struct nullb_cmd *cmd,
- enum req_opf op, sector_t sector,
- sector_t nr_sectors);
+blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd,
+ enum req_opf op, sector_t sector,
+ sector_t nr_sectors);
size_t null_zone_valid_read_len(struct nullb *nullb,
sector_t sector, unsigned int len);
#else
-static inline int null_zone_init(struct nullb_device *dev)
+static inline int null_init_zoned_dev(struct nullb_device *dev,
+ struct request_queue *q)
{
pr_err("CONFIG_BLK_DEV_ZONED not enabled\n");
return -EINVAL;
}
-static inline void null_zone_exit(struct nullb_device *dev) {}
-static inline blk_status_t null_handle_zoned(struct nullb_cmd *cmd,
- enum req_opf op, sector_t sector,
- sector_t nr_sectors)
+static inline int null_register_zoned_dev(struct nullb *nullb)
+{
+ return -ENODEV;
+}
+static inline void null_free_zoned_dev(struct nullb_device *dev) {}
+static inline blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd,
+ enum req_opf op, sector_t sector, sector_t nr_sectors)
{
return BLK_STS_NOTSUPP;
}
if (!dev)
return;
- null_zone_exit(dev);
+ null_free_zoned_dev(dev);
badblocks_exit(&dev->badblocks);
kfree(dev);
}
}
}
+blk_status_t null_process_cmd(struct nullb_cmd *cmd,
+ enum req_opf op, sector_t sector,
+ unsigned int nr_sectors)
+{
+ struct nullb_device *dev = cmd->nq->dev;
+ blk_status_t ret;
+
+ if (dev->badblocks.shift != -1) {
+ ret = null_handle_badblocks(cmd, sector, nr_sectors);
+ if (ret != BLK_STS_OK)
+ return ret;
+ }
+
+ if (dev->memory_backed)
+ return null_handle_memory_backed(cmd, op);
+
+ return BLK_STS_OK;
+}
+
static blk_status_t null_handle_cmd(struct nullb_cmd *cmd, sector_t sector,
sector_t nr_sectors, enum req_opf op)
{
goto out;
}
- if (nullb->dev->badblocks.shift != -1) {
- cmd->error = null_handle_badblocks(cmd, sector, nr_sectors);
- if (cmd->error != BLK_STS_OK)
- goto out;
- }
-
- if (dev->memory_backed)
- cmd->error = null_handle_memory_backed(cmd, op);
-
- if (!cmd->error && dev->zoned)
- cmd->error = null_handle_zoned(cmd, op, sector, nr_sectors);
+ if (dev->zoned)
+ cmd->error = null_process_zoned_cmd(cmd, op,
+ sector, nr_sectors);
+ else
+ cmd->error = null_process_cmd(cmd, op, sector, nr_sectors);
out:
nullb_complete_cmd(cmd);
disk->queue = nullb->q;
strncpy(disk->disk_name, nullb->disk_name, DISK_NAME_LEN);
-#ifdef CONFIG_BLK_DEV_ZONED
if (nullb->dev->zoned) {
- if (queue_is_mq(nullb->q)) {
- int ret = blk_revalidate_disk_zones(disk);
- if (ret)
- return ret;
- } else {
- blk_queue_chunk_sectors(nullb->q,
- nullb->dev->zone_size_sects);
- nullb->q->nr_zones = blkdev_nr_zones(disk);
- }
+ int ret = null_register_zoned_dev(nullb);
+
+ if (ret)
+ return ret;
}
-#endif
add_disk(disk);
return 0;
}
if (dev->zoned) {
- rv = null_zone_init(dev);
+ rv = null_init_zoned_dev(dev, nullb->q);
if (rv)
goto out_cleanup_blk_queue;
-
- nullb->q->limits.zoned = BLK_ZONED_HM;
- blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, nullb->q);
- blk_queue_required_elevator_features(nullb->q,
- ELEVATOR_F_ZBD_SEQ_WRITE);
}
nullb->q->queuedata = nullb;
return 0;
out_cleanup_zone:
- if (dev->zoned)
- null_zone_exit(dev);
+ null_free_zoned_dev(dev);
out_cleanup_blk_queue:
blk_cleanup_queue(nullb->q);
out_cleanup_tags:
return sect >> ilog2(dev->zone_size_sects);
}
-int null_zone_init(struct nullb_device *dev)
+int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
{
sector_t dev_size = (sector_t)dev->size * 1024 * 1024;
sector_t sector = 0;
sector += dev->zone_size_sects;
}
+ q->limits.zoned = BLK_ZONED_HM;
+ blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
+ blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
+
+ return 0;
+}
+
+int null_register_zoned_dev(struct nullb *nullb)
+{
+ struct request_queue *q = nullb->q;
+
+ if (queue_is_mq(q))
+ return blk_revalidate_disk_zones(nullb->disk);
+
+ blk_queue_chunk_sectors(q, nullb->dev->zone_size_sects);
+ q->nr_zones = blkdev_nr_zones(nullb->disk);
+
return 0;
}
-void null_zone_exit(struct nullb_device *dev)
+void null_free_zoned_dev(struct nullb_device *dev)
{
kvfree(dev->zones);
}
struct nullb_device *dev = cmd->nq->dev;
unsigned int zno = null_zone_no(dev, sector);
struct blk_zone *zone = &dev->zones[zno];
+ blk_status_t ret;
+
+ trace_nullb_zone_op(cmd, zno, zone->cond);
+
+ if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
+ return null_process_cmd(cmd, REQ_OP_WRITE, sector, nr_sectors);
switch (zone->cond) {
case BLK_ZONE_COND_FULL:
/* Cannot write to a full zone */
- cmd->error = BLK_STS_IOERR;
return BLK_STS_IOERR;
case BLK_ZONE_COND_EMPTY:
case BLK_ZONE_COND_IMP_OPEN:
if (zone->cond != BLK_ZONE_COND_EXP_OPEN)
zone->cond = BLK_ZONE_COND_IMP_OPEN;
+ ret = null_process_cmd(cmd, REQ_OP_WRITE, sector, nr_sectors);
+ if (ret != BLK_STS_OK)
+ return ret;
+
zone->wp += nr_sectors;
if (zone->wp == zone->start + zone->len)
zone->cond = BLK_ZONE_COND_FULL;
- break;
- case BLK_ZONE_COND_NOT_WP:
- break;
+ return BLK_STS_OK;
default:
/* Invalid zone condition */
return BLK_STS_IOERR;
}
-
- trace_nullb_zone_op(cmd, zno, zone->cond);
- return BLK_STS_OK;
}
static blk_status_t null_zone_mgmt(struct nullb_cmd *cmd, enum req_opf op,
return BLK_STS_OK;
}
-blk_status_t null_handle_zoned(struct nullb_cmd *cmd, enum req_opf op,
- sector_t sector, sector_t nr_sectors)
+blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd, enum req_opf op,
+ sector_t sector, sector_t nr_sectors)
{
switch (op) {
case REQ_OP_WRITE:
case REQ_OP_ZONE_FINISH:
return null_zone_mgmt(cmd, op, sector);
default:
- return BLK_STS_OK;
+ return null_process_cmd(cmd, op, sector, nr_sectors);
}
}
static void rbd_notify_op_lock(struct rbd_device *rbd_dev,
enum rbd_notify_op notify_op)
{
- struct page **reply_pages;
- size_t reply_len;
-
- __rbd_notify_op_lock(rbd_dev, notify_op, &reply_pages, &reply_len);
- ceph_release_page_vector(reply_pages, calc_pages_for(0, reply_len));
+ __rbd_notify_op_lock(rbd_dev, notify_op, NULL, NULL);
}
static void rbd_notify_acquired_lock(struct work_struct *work)
cancel_work_sync(&rbd_dev->unlock_work);
}
+/*
+ * header_rwsem must not be held to avoid a deadlock with
+ * rbd_dev_refresh() when flushing notifies.
+ */
static void rbd_unregister_watch(struct rbd_device *rbd_dev)
{
cancel_tasks_sync(rbd_dev);
static void rbd_dev_image_release(struct rbd_device *rbd_dev)
{
- rbd_dev_unprobe(rbd_dev);
- if (rbd_dev->opts)
+ if (!rbd_is_ro(rbd_dev))
rbd_unregister_watch(rbd_dev);
+
+ rbd_dev_unprobe(rbd_dev);
rbd_dev->image_format = 0;
kfree(rbd_dev->spec->image_id);
rbd_dev->spec->image_id = NULL;
* device. If this image is the one being mapped (i.e., not a
* parent), initiate a watch on its header object before using that
* object to get detailed information about the rbd image.
+ *
+ * On success, returns with header_rwsem held for write if called
+ * with @depth == 0.
*/
static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
{
}
}
+ if (!depth)
+ down_write(&rbd_dev->header_rwsem);
+
ret = rbd_dev_header_info(rbd_dev);
if (ret) {
if (ret == -ENOENT && !need_watch)
rbd_print_dne(rbd_dev, false);
- goto err_out_watch;
+ goto err_out_probe;
}
/*
return 0;
err_out_probe:
- rbd_dev_unprobe(rbd_dev);
-err_out_watch:
+ if (!depth)
+ up_write(&rbd_dev->header_rwsem);
if (need_watch)
rbd_unregister_watch(rbd_dev);
+ rbd_dev_unprobe(rbd_dev);
err_out_format:
rbd_dev->image_format = 0;
kfree(rbd_dev->spec->image_id);
goto err_out_rbd_dev;
}
- down_write(&rbd_dev->header_rwsem);
rc = rbd_dev_image_probe(rbd_dev, 0);
- if (rc < 0) {
- up_write(&rbd_dev->header_rwsem);
+ if (rc < 0)
goto err_out_rbd_dev;
- }
if (rbd_dev->opts->alloc_size > rbd_dev->layout.object_size) {
rbd_warn(rbd_dev, "alloc_size adjusted to %u",
#include <linux/blk-mq.h>
#include <linux/blk-mq-virtio.h>
#include <linux/numa.h>
+#include <uapi/linux/virtio_ring.h>
#define PART_BITS 4
#define VQ_NAME_LEN 16
#include <linux/virtio.h>
#include <linux/virtio_rng.h>
#include <linux/module.h>
+#include <linux/slab.h>
static DEFINE_IDA(rng_index_ida);
for (i = 0; i < chip->nr_allocated_banks; i++) {
if (digests[i].alg_id != chip->allocated_banks[i].alg_id) {
- rc = EINVAL;
+ rc = -EINVAL;
goto out;
}
}
rc = -ENODEV;
return rc;
}
+EXPORT_SYMBOL_GPL(tpm2_get_cc_attrs_tbl);
/**
* tpm2_startup - turn on the TPM
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2012 IBM Corporation
+ * Copyright (C) 2012-2020 IBM Corporation
*
* Author: Ashley Lai <ashleydlai@gmail.com>
*
}
/**
+ * ibmvtpm_crq_send_init - Send a CRQ initialize message
+ * @ibmvtpm: vtpm device struct
+ *
+ * Return:
+ * 0 on success.
+ * Non-zero on failure.
+ */
+static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
+{
+ int rc;
+
+ rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
+ if (rc != H_SUCCESS)
+ dev_err(ibmvtpm->dev,
+ "%s failed rc=%d\n", __func__, rc);
+
+ return rc;
+}
+
+/**
+ * tpm_ibmvtpm_resume - Resume from suspend
+ *
+ * @dev: device struct
+ *
+ * Return: Always 0.
+ */
+static int tpm_ibmvtpm_resume(struct device *dev)
+{
+ struct tpm_chip *chip = dev_get_drvdata(dev);
+ struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+ int rc = 0;
+
+ do {
+ if (rc)
+ msleep(100);
+ rc = plpar_hcall_norets(H_ENABLE_CRQ,
+ ibmvtpm->vdev->unit_address);
+ } while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
+
+ if (rc) {
+ dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
+ return rc;
+ }
+
+ rc = vio_enable_interrupts(ibmvtpm->vdev);
+ if (rc) {
+ dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
+ return rc;
+ }
+
+ rc = ibmvtpm_crq_send_init(ibmvtpm);
+ if (rc)
+ dev_err(dev, "Error send_init rc=%d\n", rc);
+
+ return rc;
+}
+
+/**
* tpm_ibmvtpm_send() - Send a TPM command
* @chip: tpm chip struct
* @buf: buffer contains data to send
static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+ bool retry = true;
int rc, sig;
if (!ibmvtpm->rtce_buf) {
*/
ibmvtpm->tpm_processing_cmd = true;
+again:
rc = ibmvtpm_send_crq(ibmvtpm->vdev,
IBMVTPM_VALID_CMD, VTPM_TPM_COMMAND,
count, ibmvtpm->rtce_dma_handle);
if (rc != H_SUCCESS) {
+ /*
+ * H_CLOSED can be returned after LPM resume. Call
+ * tpm_ibmvtpm_resume() to re-enable the CRQ then retry
+ * ibmvtpm_send_crq() once before failing.
+ */
+ if (rc == H_CLOSED && retry) {
+ tpm_ibmvtpm_resume(ibmvtpm->dev);
+ retry = false;
+ goto again;
+ }
dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
- rc = 0;
ibmvtpm->tpm_processing_cmd = false;
- } else
- rc = 0;
+ }
spin_unlock(&ibmvtpm->rtce_lock);
- return rc;
+ return 0;
}
static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
}
/**
- * ibmvtpm_crq_send_init - Send a CRQ initialize message
- * @ibmvtpm: vtpm device struct
- *
- * Return:
- * 0 on success.
- * Non-zero on failure.
- */
-static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
-{
- int rc;
-
- rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
- if (rc != H_SUCCESS)
- dev_err(ibmvtpm->dev,
- "ibmvtpm_crq_send_init failed rc=%d\n", rc);
-
- return rc;
-}
-
-/**
* tpm_ibmvtpm_remove - ibm vtpm remove entry point
* @vdev: vio device struct
*
ibmvtpm->crq_dma_handle, CRQ_RES_BUF_SIZE);
}
-/**
- * tpm_ibmvtpm_resume - Resume from suspend
- *
- * @dev: device struct
- *
- * Return: Always 0.
- */
-static int tpm_ibmvtpm_resume(struct device *dev)
-{
- struct tpm_chip *chip = dev_get_drvdata(dev);
- struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
- int rc = 0;
-
- do {
- if (rc)
- msleep(100);
- rc = plpar_hcall_norets(H_ENABLE_CRQ,
- ibmvtpm->vdev->unit_address);
- } while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
-
- if (rc) {
- dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
- return rc;
- }
-
- rc = vio_enable_interrupts(ibmvtpm->vdev);
- if (rc) {
- dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
- return rc;
- }
-
- rc = ibmvtpm_crq_send_init(ibmvtpm);
- if (rc)
- dev_err(dev, "Error send_init rc=%d\n", rc);
-
- return rc;
-}
-
static bool tpm_ibmvtpm_req_canceled(struct tpm_chip *chip, u8 status)
{
return (status == 0);
u32 intmask;
int rc;
+ if (priv->irq == 0)
+ return;
+
rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
if (rc < 0)
intmask = 0;
if (irq) {
tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
irq);
- if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
+ if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
dev_err(&chip->dev, FW_BUG
"TPM interrupt not working, polling instead\n");
+
+ disable_interrupts(chip);
+ }
} else {
tpm_tis_probe_irq(chip, intmask);
}
/* TODO: Convert to DT parent scheme */
ref_clk = of_clk_get_parent_name(np, 0);
- hw = __clk_hw_register_fixed_rate_with_accuracy(NULL, NULL, pll_clk,
+ hw = __clk_hw_register_fixed_rate(NULL, NULL, pll_clk,
ref_clk, NULL, NULL, 0, rate, 0,
CLK_FIXED_RATE_PARENT_ACCURACY);
.recalc_rate = mmp_clk_pll_recalc_rate,
};
-struct clk *mmp_clk_register_pll(char *name,
+static struct clk *mmp_clk_register_pll(char *name,
unsigned long default_rate,
void __iomem *enable_reg, u32 enable,
void __iomem *reg, u8 shift,
return clk;
}
+
+void mmp_register_pll_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_pll_clk *clks,
+ void __iomem *base, int size)
+{
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ void __iomem *reg = NULL;
+
+ if (clks[i].offset)
+ reg = base + clks[i].offset;
+
+ clk = mmp_clk_register_pll(clks[i].name,
+ clks[i].default_rate,
+ base + clks[i].enable_offset,
+ clks[i].enable,
+ reg, clks[i].shift,
+ clks[i].input_rate,
+ base + clks[i].postdiv_offset,
+ clks[i].postdiv_shift);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ continue;
+ }
+ if (clks[i].id)
+ unit->clk_table[clks[i].id] = clk;
+ }
+}
}
}
-void mmp_register_pll_clks(struct mmp_clk_unit *unit,
- struct mmp_param_pll_clk *clks,
- void __iomem *base, int size)
-{
- struct clk *clk;
- int i;
-
- for (i = 0; i < size; i++) {
- void __iomem *reg = NULL;
-
- if (clks[i].offset)
- reg = base + clks[i].offset;
-
- clk = mmp_clk_register_pll(clks[i].name,
- clks[i].default_rate,
- base + clks[i].enable_offset,
- clks[i].enable,
- reg, clks[i].shift,
- clks[i].input_rate,
- base + clks[i].postdiv_offset,
- clks[i].postdiv_shift);
- if (IS_ERR(clk)) {
- pr_err("%s: failed to register clock %s\n",
- __func__, clks[i].name);
- continue;
- }
- if (clks[i].id)
- unit->clk_table[clks[i].id] = clk;
- }
-}
-
void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id,
struct clk *clk)
{
struct mmp_param_pll_clk *clks,
void __iomem *base, int size);
-extern struct clk *mmp_clk_register_pll(char *name,
- unsigned long default_rate,
- void __iomem *enable_reg, u32 enable,
- void __iomem *reg, u8 shift,
- unsigned long input_rate,
- void __iomem *postdiv_reg, u8 postdiv_shift);
-
#define DEFINE_MIX_REG_INFO(w_d, s_d, w_m, s_m, fc) \
{ \
.width_div = (w_d), \
0x1000, BIT(12), 0, 0);
static SPRD_SC_GATE_CLK_FW_NAME(uart0_eb, "uart0-eb", "ext-26m", 0x0,
0x1000, BIT(13), 0, 0);
+/* uart1_eb is for console, don't gate even if unused */
static SPRD_SC_GATE_CLK_FW_NAME(uart1_eb, "uart1-eb", "ext-26m", 0x0,
- 0x1000, BIT(14), 0, 0);
+ 0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
static SPRD_SC_GATE_CLK_FW_NAME(uart2_eb, "uart2-eb", "ext-26m", 0x0,
0x1000, BIT(15), 0, 0);
static SPRD_SC_GATE_CLK_FW_NAME(uart3_eb, "uart3-eb", "ext-26m", 0x0,
* @base: base port address of the IIO device
*/
struct quad8_iio {
+ struct mutex lock;
struct counter_device counter;
unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
unsigned int preset[QUAD8_NUM_COUNTERS];
/* Borrow XOR Carry effectively doubles count range */
*val = (borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
for (i = 0; i < 3; i++)
*val |= (unsigned int)inb(base_offset) << (8 * i);
+ mutex_unlock(&priv->lock);
+
return IIO_VAL_INT;
case IIO_CHAN_INFO_ENABLE:
*val = priv->ab_enable[chan->channel];
if ((unsigned int)val > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_ENABLE:
/* only boolean values accepted */
if (val < 0 || val > 1)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[chan->channel] = val;
ior_cfg = val | priv->preset_enable[chan->channel] << 1;
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_SCALE:
+ mutex_lock(&priv->lock);
+
/* Quadrature scaling only available in quadrature mode */
- if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1))
+ if (!priv->quadrature_mode[chan->channel] &&
+ (val2 || val != 1)) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
/* Only three gain states (1, 0.5, 0.25) */
if (val == 1 && !val2)
priv->quadrature_scale[chan->channel] = 2;
break;
default:
+ mutex_unlock(&priv->lock);
return -EINVAL;
}
- else
+ else {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
+ mutex_unlock(&priv->lock);
return 0;
}
if (preset > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->preset[chan->channel] = preset;
/* Reset Byte Pointer */
for (i = 0; i < 3; i++)
outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[chan->channel] = preset_enable;
ior_cfg = priv->ab_enable[chan->channel] |
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
unsigned int mode_cfg = cnt_mode << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ mutex_lock(&priv->lock);
+
priv->count_mode[chan->channel] = cnt_mode;
/* Add quadrature mode configuration */
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
const struct iio_chan_spec *chan, unsigned int synchronous_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[chan->channel] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[chan->channel])
+ if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[chan->channel] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
const struct iio_chan_spec *chan, unsigned int quadrature_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- unsigned int mode_cfg = priv->count_mode[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int mode_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[chan->channel] << 1;
if (quadrature_mode)
mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
const struct iio_chan_spec *chan, unsigned int index_polarity)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[chan->channel];
priv->index_polarity[chan->channel] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
static int quad8_count_read(struct counter_device *counter,
struct counter_count *count, unsigned long *val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int flags;
unsigned int borrow;
/* Borrow XOR Carry effectively doubles count range */
*val = (unsigned long)(borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
for (i = 0; i < 3; i++)
*val |= (unsigned long)inb(base_offset) << (8 * i);
+ mutex_unlock(&priv->lock);
+
return 0;
}
static int quad8_count_write(struct counter_device *counter,
struct counter_count *count, unsigned long val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
int i;
if (val > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
}
static int quad8_function_get(struct counter_device *counter,
struct counter_count *count, size_t *function)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int id = count->id;
- const unsigned int quadrature_mode = priv->quadrature_mode[id];
- const unsigned int scale = priv->quadrature_scale[id];
- if (quadrature_mode)
- switch (scale) {
+ mutex_lock(&priv->lock);
+
+ if (priv->quadrature_mode[id])
+ switch (priv->quadrature_scale[id]) {
case 0:
*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
break;
else
*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
+ mutex_unlock(&priv->lock);
+
return 0;
}
const int id = count->id;
unsigned int *const quadrature_mode = priv->quadrature_mode + id;
unsigned int *const scale = priv->quadrature_scale + id;
- unsigned int mode_cfg = priv->count_mode[id] << 1;
unsigned int *const synchronous_mode = priv->synchronous_mode + id;
- const unsigned int idr_cfg = priv->index_polarity[id] << 1;
const int base_offset = priv->base + 2 * id + 1;
+ unsigned int mode_cfg;
+ unsigned int idr_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[id] << 1;
+ idr_cfg = priv->index_polarity[id] << 1;
if (function == QUAD8_COUNT_FUNCTION_PULSE_DIRECTION) {
*quadrature_mode = 0;
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = priv->synchronous_mode[channel_id] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[channel_id];
priv->index_polarity[channel_id] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[channel_id] << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[channel_id] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[channel_id])
+ if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[channel_id] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
break;
}
+ mutex_lock(&priv->lock);
+
priv->count_mode[count->id] = cnt_mode;
/* Set count mode configuration value */
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
if (err)
return err;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[count->id] = ab_enable;
ior_cfg = ab_enable | priv->preset_enable[count->id] << 1;
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return len;
}
return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
+ unsigned int preset)
+{
+ const unsigned int base_offset = quad8iio->base + 2 * id;
+ int i;
+
+ quad8iio->preset[id] = preset;
+
+ /* Reset Byte Pointer */
+ outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+
+ /* Set Preset Register */
+ for (i = 0; i < 3; i++)
+ outb(preset >> (8 * i), base_offset);
+}
+
static ssize_t quad8_count_preset_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
- const int base_offset = priv->base + 2 * count->id;
unsigned int preset;
int ret;
- int i;
ret = kstrtouint(buf, 0, &preset);
if (ret)
if (preset > 0xFFFFFF)
return -EINVAL;
- priv->preset[count->id] = preset;
+ mutex_lock(&priv->lock);
- /* Reset Byte Pointer */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+ quad8_preset_register_set(priv, count->id, preset);
- /* Set Preset Register */
- for (i = 0; i < 3; i++)
- outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
return len;
}
static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_read(counter, count, private, buf);
+ mutex_unlock(&priv->lock);
+ return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+ mutex_unlock(&priv->lock);
+
/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
return sprintf(buf, "33554431\n");
}
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
+ unsigned int ceiling;
+ int ret;
+
+ ret = kstrtouint(buf, 0, &ceiling);
+ if (ret)
+ return ret;
+
+ /* Only 24-bit values are supported */
+ if (ceiling > 0xFFFFFF)
+ return -EINVAL;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_write(counter, count, private, buf,
- len);
+ quad8_preset_register_set(priv, count->id, ceiling);
+ break;
}
+ mutex_unlock(&priv->lock);
+
return len;
}
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[count->id] = preset_enable;
ior_cfg = priv->ab_enable[count->id] | (unsigned int)preset_enable << 1;
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
quad8iio->counter.priv = quad8iio;
quad8iio->base = base[id];
+ /* Initialize mutex */
+ mutex_init(&quad8iio->lock);
+
/* Reset all counters and disable interrupt function */
outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
/* Set initial configuration for all counters */
struct caam_drv_private_jr *jrp = dev_get_drvdata(jrdev);
struct aead_edesc *edesc;
int ecode = 0;
+ bool has_bklog;
dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
edesc = rctx->edesc;
+ has_bklog = edesc->bklog;
if (err)
ecode = caam_jr_strstatus(jrdev, err);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
aead_request_complete(req, ecode);
else
crypto_finalize_aead_request(jrp->engine, req, ecode);
struct caam_drv_private_jr *jrp = dev_get_drvdata(jrdev);
int ivsize = crypto_skcipher_ivsize(skcipher);
int ecode = 0;
+ bool has_bklog;
dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
edesc = rctx->edesc;
+ has_bklog = edesc->bklog;
if (err)
ecode = caam_jr_strstatus(jrdev, err);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
skcipher_request_complete(req, ecode);
else
crypto_finalize_skcipher_request(jrp->engine, req, ecode);
if (ivsize || mapped_dst_nents > 1)
sg_to_sec4_set_last(edesc->sec4_sg + dst_sg_idx +
- mapped_dst_nents);
+ mapped_dst_nents - 1 + !!ivsize);
if (sec4_sg_bytes) {
edesc->sec4_sg_dma = dma_map_single(jrdev, edesc->sec4_sg,
struct caam_hash_state *state = ahash_request_ctx(req);
struct caam_hash_ctx *ctx = crypto_ahash_ctx(ahash);
int ecode = 0;
+ bool has_bklog;
dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
edesc = state->edesc;
+ has_bklog = edesc->bklog;
if (err)
ecode = caam_jr_strstatus(jrdev, err);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
req->base.complete(&req->base, ecode);
else
crypto_finalize_hash_request(jrp->engine, req, ecode);
struct caam_hash_state *state = ahash_request_ctx(req);
int digestsize = crypto_ahash_digestsize(ahash);
int ecode = 0;
+ bool has_bklog;
dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
edesc = state->edesc;
+ has_bklog = edesc->bklog;
if (err)
ecode = caam_jr_strstatus(jrdev, err);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
req->base.complete(&req->base, ecode);
else
crypto_finalize_hash_request(jrp->engine, req, ecode);
struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
struct rsa_edesc *edesc;
int ecode = 0;
+ bool has_bklog;
if (err)
ecode = caam_jr_strstatus(dev, err);
edesc = req_ctx->edesc;
+ has_bklog = edesc->bklog;
rsa_pub_unmap(dev, edesc, req);
rsa_io_unmap(dev, edesc, req);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
akcipher_request_complete(req, ecode);
else
crypto_finalize_akcipher_request(jrp->engine, req, ecode);
struct caam_rsa_req_ctx *req_ctx = akcipher_request_ctx(req);
struct rsa_edesc *edesc;
int ecode = 0;
+ bool has_bklog;
if (err)
ecode = caam_jr_strstatus(dev, err);
edesc = req_ctx->edesc;
+ has_bklog = edesc->bklog;
switch (key->priv_form) {
case FORM1:
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
akcipher_request_complete(req, ecode);
else
crypto_finalize_akcipher_request(jrp->engine, req, ecode);
static int chcr_ktls_update_connection_state(struct chcr_ktls_info *tx_info,
int new_state)
{
- unsigned long flags;
-
/* This function can be called from both rx (interrupt context) and tx
* queue contexts.
*/
- spin_lock_irqsave(&tx_info->lock, flags);
+ spin_lock_bh(&tx_info->lock);
switch (tx_info->connection_state) {
case KTLS_CONN_CLOSED:
tx_info->connection_state = new_state;
pr_err("unknown KTLS connection state\n");
break;
}
- spin_unlock_irqrestore(&tx_info->lock, flags);
+ spin_unlock_bh(&tx_info->lock);
return tx_info->connection_state;
}
if (!len)
len = snprintf(buf, sizeof(buf), "%s%s", pfx, str);
else
- len += snprintf(buf+len, sizeof(buf)-len, ", %s", str);
+ len += scnprintf(buf+len, sizeof(buf)-len, ", %s", str);
}
if (len)
printk("%s\n", buf);
#define EFI_ALLOC_ALIGN EFI_PAGE_SIZE
#endif
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_X86)
#define __efistub_global __section(.data)
#else
#define __efistub_global
*/
#define EFI_READ_CHUNK_SIZE SZ_1M
+struct finfo {
+ efi_file_info_t info;
+ efi_char16_t filename[MAX_FILENAME_SIZE];
+};
+
static efi_status_t efi_open_file(efi_file_protocol_t *volume,
- efi_char16_t *filename_16,
+ struct finfo *fi,
efi_file_protocol_t **handle,
unsigned long *file_size)
{
- struct {
- efi_file_info_t info;
- efi_char16_t filename[MAX_FILENAME_SIZE];
- } finfo;
efi_guid_t info_guid = EFI_FILE_INFO_ID;
efi_file_protocol_t *fh;
unsigned long info_sz;
efi_status_t status;
- status = volume->open(volume, &fh, filename_16, EFI_FILE_MODE_READ, 0);
+ status = volume->open(volume, &fh, fi->filename, EFI_FILE_MODE_READ, 0);
if (status != EFI_SUCCESS) {
pr_efi_err("Failed to open file: ");
- efi_char16_printk(filename_16);
+ efi_char16_printk(fi->filename);
efi_printk("\n");
return status;
}
- info_sz = sizeof(finfo);
- status = fh->get_info(fh, &info_guid, &info_sz, &finfo);
+ info_sz = sizeof(struct finfo);
+ status = fh->get_info(fh, &info_guid, &info_sz, fi);
if (status != EFI_SUCCESS) {
pr_efi_err("Failed to get file info\n");
fh->close(fh);
}
*handle = fh;
- *file_size = finfo.info.file_size;
+ *file_size = fi->info.file_size;
return EFI_SUCCESS;
}
alloc_addr = alloc_size = 0;
do {
- efi_char16_t filename[MAX_FILENAME_SIZE];
+ struct finfo fi;
unsigned long size;
void *addr;
offset = find_file_option(cmdline, cmdline_len,
optstr, optstr_size,
- filename, ARRAY_SIZE(filename));
+ fi.filename, ARRAY_SIZE(fi.filename));
if (!offset)
break;
return status;
}
- status = efi_open_file(volume, filename, &file, &size);
+ status = efi_open_file(volume, &fi, &file, &size);
if (status != EFI_SUCCESS)
goto err_close_volume;
/* Maximum physical address for 64-bit kernel with 4-level paging */
#define MAXMEM_X86_64_4LEVEL (1ull << 46)
-static efi_system_table_t *sys_table;
+static efi_system_table_t *sys_table __efistub_global;
extern const bool efi_is64;
extern u32 image_offset;
image_base = efi_table_attr(image, image_base);
image_offset = (void *)startup_32 - image_base;
- hdr = &((struct boot_params *)image_base)->hdr;
-
status = efi_allocate_pages(0x4000, (unsigned long *)&boot_params, ULONG_MAX);
if (status != EFI_SUCCESS) {
efi_printk("Failed to allocate lowmem for boot params\n");
* now use KERNEL_IMAGE_SIZE, which will be 512MiB, the same as what
* KASLR uses.
*
- * Also relocate it if image_offset is zero, i.e. we weren't loaded by
- * LoadImage, but we are not aligned correctly.
+ * Also relocate it if image_offset is zero, i.e. the kernel wasn't
+ * loaded by LoadImage, but rather by a bootloader that called the
+ * handover entry. The reason we must always relocate in this case is
+ * to handle the case of systemd-boot booting a unified kernel image,
+ * which is a PE executable that contains the bzImage and an initrd as
+ * COFF sections. The initrd section is placed after the bzImage
+ * without ensuring that there are at least init_size bytes available
+ * for the bzImage, and thus the compressed kernel's startup code may
+ * overwrite the initrd unless it is moved out of the way.
*/
buffer_start = ALIGN(bzimage_addr - image_offset,
if ((buffer_start < LOAD_PHYSICAL_ADDR) ||
(IS_ENABLED(CONFIG_X86_32) && buffer_end > KERNEL_IMAGE_SIZE) ||
(IS_ENABLED(CONFIG_X86_64) && buffer_end > MAXMEM_X86_64_4LEVEL) ||
- (image_offset == 0 && !IS_ALIGNED(bzimage_addr,
- hdr->kernel_alignment))) {
+ (image_offset == 0)) {
status = efi_relocate_kernel(&bzimage_addr,
hdr->init_size, hdr->init_size,
hdr->pref_address,
config IMX_SCU
bool "IMX SCU Protocol driver"
- depends on IMX_MBOX || COMPILE_TEST
+ depends on IMX_MBOX
help
The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
config IMX_SCU_PD
bool "IMX SCU Power Domain driver"
- depends on IMX_SCU || COMPILE_TEST
+ depends on IMX_SCU
help
The System Controller Firmware (SCFW) based power domain driver.
PM_API(PM_QUERY_DATA),
};
-struct dentry *firmware_debugfs_root;
+static struct dentry *firmware_debugfs_root;
/**
* zynqmp_pm_argument_value() - Extract argument value from a PM-API request
return ret;
ret = pci_enable_sriov(pcidev, num_vfs);
- if (ret)
+ if (ret) {
dfl_fpga_cdev_config_ports_pf(cdev);
+ return ret;
+ }
}
- return ret;
+ return num_vfs;
}
static void cci_pci_remove(struct pci_dev *pcidev)
priv->clk = devm_clk_get(dev, "ref_clk");
if (IS_ERR(priv->clk)) {
- dev_err(dev, "input clock not found\n");
+ if (PTR_ERR(priv->clk) != -EPROBE_DEFER)
+ dev_err(dev, "input clock not found\n");
return PTR_ERR(priv->clk);
}
*/
static bool amdgpu_device_check_vram_lost(struct amdgpu_device *adev)
{
- return !!memcmp(adev->gart.ptr, adev->reset_magic,
- AMDGPU_RESET_MAGIC_NUM);
+ if (memcmp(adev->gart.ptr, adev->reset_magic,
+ AMDGPU_RESET_MAGIC_NUM))
+ return true;
+
+ if (!adev->in_gpu_reset)
+ return false;
+
+ /*
+ * For all ASICs with baco/mode1 reset, the VRAM is
+ * always assumed to be lost.
+ */
+ switch (amdgpu_asic_reset_method(adev)) {
+ case AMD_RESET_METHOD_BACO:
+ case AMD_RESET_METHOD_MODE1:
+ return true;
+ default:
+ return false;
+ }
}
/**
{
int i, r;
+ amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE);
+ amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE);
for (i = adev->num_ip_blocks - 1; i >= 0; i--) {
if (!adev->ip_blocks[i].status.valid)
int r;
if (cik_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
- if (!adev->in_suspend)
- amdgpu_inc_vram_lost(adev);
r = amdgpu_dpm_baco_reset(adev);
} else {
r = cik_asic_pci_config_reset(adev);
#define DEFAULT_SH_MEM_CONFIG \
((SH_MEM_ADDRESS_MODE_64 << SH_MEM_CONFIG__ADDRESS_MODE__SHIFT) | \
- (SH_MEM_ALIGNMENT_MODE_DWORD << SH_MEM_CONFIG__ALIGNMENT_MODE__SHIFT) | \
+ (SH_MEM_ALIGNMENT_MODE_UNALIGNED << SH_MEM_CONFIG__ALIGNMENT_MODE__SHIFT) | \
(SH_MEM_RETRY_MODE_ALL << SH_MEM_CONFIG__RETRY_MODE__SHIFT) | \
(3 << SH_MEM_CONFIG__INITIAL_INST_PREFETCH__SHIFT))
static const struct amdgpu_gfxoff_quirk amdgpu_gfxoff_quirk_list[] = {
/* https://bugzilla.kernel.org/show_bug.cgi?id=204689 */
{ 0x1002, 0x15dd, 0x1002, 0x15dd, 0xc8 },
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=207171 */
+ { 0x1002, 0x15dd, 0x103c, 0x83e7, 0xd3 },
{ 0, 0, 0, 0, 0 },
};
struct smu_context *smu = &adev->smu;
if (nv_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
- if (!adev->in_suspend)
- amdgpu_inc_vram_lost(adev);
ret = smu_baco_enter(smu);
if (ret)
return ret;
if (ret)
return ret;
} else {
- if (!adev->in_suspend)
- amdgpu_inc_vram_lost(adev);
ret = nv_asic_mode1_reset(adev);
}
switch (soc15_asic_reset_method(adev)) {
case AMD_RESET_METHOD_BACO:
- if (!adev->in_suspend)
- amdgpu_inc_vram_lost(adev);
return soc15_asic_baco_reset(adev);
case AMD_RESET_METHOD_MODE2:
return amdgpu_dpm_mode2_reset(adev);
default:
- if (!adev->in_suspend)
- amdgpu_inc_vram_lost(adev);
return soc15_asic_mode1_reset(adev);
}
}
int r;
if (vi_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
- if (!adev->in_suspend)
- amdgpu_inc_vram_lost(adev);
r = amdgpu_dpm_baco_reset(adev);
} else {
r = vi_asic_pci_config_reset(adev);
i2c_del_adapter(&aconnector->i2c->base);
kfree(aconnector->i2c);
}
+ kfree(aconnector->dm_dp_aux.aux.name);
kfree(connector);
}
static int
amdgpu_dm_connector_late_register(struct drm_connector *connector)
{
-#if defined(CONFIG_DEBUG_FS)
struct amdgpu_dm_connector *amdgpu_dm_connector =
to_amdgpu_dm_connector(connector);
+ int r;
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+ amdgpu_dm_connector->dm_dp_aux.aux.dev = connector->kdev;
+ r = drm_dp_aux_register(&amdgpu_dm_connector->dm_dp_aux.aux);
+ if (r)
+ return r;
+ }
+
+#if defined(CONFIG_DEBUG_FS)
connector_debugfs_init(amdgpu_dm_connector);
#endif
if (connector_type == DRM_MODE_CONNECTOR_DisplayPort
|| connector_type == DRM_MODE_CONNECTOR_eDP)
- amdgpu_dm_initialize_dp_connector(dm, aconnector);
+ amdgpu_dm_initialize_dp_connector(dm, aconnector, link->link_index);
out_free:
if (res) {
to_amdgpu_dm_connector(connector);
int r;
- amdgpu_dm_connector->dm_dp_aux.aux.dev = connector->kdev;
- r = drm_dp_aux_register(&amdgpu_dm_connector->dm_dp_aux.aux);
- if (r)
+ r = drm_dp_mst_connector_late_register(connector,
+ amdgpu_dm_connector->port);
+ if (r < 0)
return r;
#if defined(CONFIG_DEBUG_FS)
connector_debugfs_init(amdgpu_dm_connector);
#endif
- return r;
+ return 0;
}
static void
};
void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm,
- struct amdgpu_dm_connector *aconnector)
+ struct amdgpu_dm_connector *aconnector,
+ int link_index)
{
- aconnector->dm_dp_aux.aux.name = "dmdc";
+ aconnector->dm_dp_aux.aux.name =
+ kasprintf(GFP_KERNEL, "AMDGPU DM aux hw bus %d",
+ link_index);
aconnector->dm_dp_aux.aux.transfer = dm_dp_aux_transfer;
aconnector->dm_dp_aux.ddc_service = aconnector->dc_link->ddc;
int dm_mst_get_pbn_divider(struct dc_link *link);
void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm,
- struct amdgpu_dm_connector *aconnector);
+ struct amdgpu_dm_connector *aconnector,
+ int link_index);
#if defined(CONFIG_DRM_AMD_DC_DCN)
bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
struct pp_hwmgr *hwmgr,
const ATOM_PPLIB_POWERPLAYTABLE *powerplay_table)
{
+ hwmgr->thermal_controller.ucType =
+ powerplay_table->sThermalController.ucType;
+ hwmgr->thermal_controller.ucI2cLine =
+ powerplay_table->sThermalController.ucI2cLine;
+ hwmgr->thermal_controller.ucI2cAddress =
+ powerplay_table->sThermalController.ucI2cAddress;
+
+ hwmgr->thermal_controller.fanInfo.bNoFan =
+ (0 != (powerplay_table->sThermalController.ucFanParameters &
+ ATOM_PP_FANPARAMETERS_NOFAN));
+
+ hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution =
+ powerplay_table->sThermalController.ucFanParameters &
+ ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK;
+
+ hwmgr->thermal_controller.fanInfo.ulMinRPM
+ = powerplay_table->sThermalController.ucFanMinRPM * 100UL;
+ hwmgr->thermal_controller.fanInfo.ulMaxRPM
+ = powerplay_table->sThermalController.ucFanMaxRPM * 100UL;
+
+ set_hw_cap(hwmgr,
+ ATOM_PP_THERMALCONTROLLER_NONE != hwmgr->thermal_controller.ucType,
+ PHM_PlatformCaps_ThermalController);
+
+ hwmgr->thermal_controller.use_hw_fan_control = 1;
+
return 0;
}
{
uint32_t i;
+ /* force the trim if mclk_switching is disabled to prevent flicker */
+ bool force_trim = (low_limit == high_limit);
for (i = 0; i < dpm_table->count; i++) {
/*skip the trim if od is enabled*/
- if (!hwmgr->od_enabled && (dpm_table->dpm_levels[i].value < low_limit
+ if ((!hwmgr->od_enabled || force_trim)
+ && (dpm_table->dpm_levels[i].value < low_limit
|| dpm_table->dpm_levels[i].value > high_limit))
dpm_table->dpm_levels[i].enabled = false;
else
static bool renoir_is_dpm_running(struct smu_context *smu)
{
+ struct amdgpu_device *adev = smu->adev;
+
/*
* Util now, the pmfw hasn't exported the interface of SMU
* feature mask to APU SKU so just force on all the feature
* at early initial stage.
*/
- return true;
+ if (adev->in_suspend)
+ return false;
+ else
+ return true;
}
if (ret)
goto out;
+ if (ras && ras->supported) {
+ ret = smu_send_smc_msg(smu, SMU_MSG_PrepareMp1ForUnload, NULL);
+ if (ret)
+ goto out;
+ }
+
/* clear vbios scratch 6 and 7 for coming asic reinit */
WREG32(adev->bios_scratch_reg_offset + 6, 0);
WREG32(adev->bios_scratch_reg_offset + 7, 0);
num_modes += drm_add_edid_modes(connector, anx6345->edid);
+ /* Driver currently supports only 6bpc */
+ connector->display_info.bpc = 6;
+
unlock:
if (power_off)
anx6345_poweroff(anx6345);
if (pos->vcpi) {
drm_dp_mst_put_port_malloc(port);
pos->vcpi = 0;
+ pos->pbn = 0;
}
return 0;
intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
crtc_state->lane_count, is_mst);
- intel_dp->regs.dp_tp_ctl = DP_TP_CTL(port);
- intel_dp->regs.dp_tp_status = DP_TP_STATUS(port);
-
intel_edp_panel_on(intel_dp);
intel_ddi_clk_select(encoder, crtc_state);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->uapi.crtc);
enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
u32 temp, flags = 0;
/* XXX: DSI transcoder paranoia */
if (drm_WARN_ON(&dev_priv->drm, transcoder_is_dsi(cpu_transcoder)))
return;
+ if (INTEL_GEN(dev_priv) >= 12) {
+ intel_dp->regs.dp_tp_ctl = TGL_DP_TP_CTL(cpu_transcoder);
+ intel_dp->regs.dp_tp_status = TGL_DP_TP_STATUS(cpu_transcoder);
+ }
+
intel_dsc_get_config(encoder, pipe_config);
temp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder));
static struct intel_connector *
intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port)
{
+ struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
struct intel_connector *connector;
enum port port = intel_dig_port->base.port;
intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
intel_dig_port->dp.prepare_link_retrain =
intel_ddi_prepare_link_retrain;
+ if (INTEL_GEN(dev_priv) < 12) {
+ intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
+ intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
+ }
if (!intel_dp_init_connector(intel_dig_port, connector)) {
kfree(connector);
{
.name = "AUX D TBT1",
.domains = TGL_AUX_D_TBT1_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX E TBT2",
.domains = TGL_AUX_E_TBT2_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX F TBT3",
.domains = TGL_AUX_F_TBT3_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX G TBT4",
.domains = TGL_AUX_G_TBT4_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX H TBT5",
.domains = TGL_AUX_H_TBT5_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX I TBT6",
.domains = TGL_AUX_I_TBT6_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
intel_crtc_has_type(pipe_config,
INTEL_OUTPUT_DP_MST));
- intel_dp->regs.dp_tp_ctl = DP_TP_CTL(port);
- intel_dp->regs.dp_tp_status = DP_TP_STATUS(port);
-
/*
* There are four kinds of DP registers:
*
intel_dig_port->dp.output_reg = output_reg;
intel_dig_port->max_lanes = 4;
+ intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
+ intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
intel_encoder->type = INTEL_OUTPUT_DP;
intel_encoder->power_domain = intel_port_to_power_domain(port);
*/
if (dev_priv->vbt.backlight.type !=
INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE &&
+ i915_modparams.enable_dpcd_backlight != 1 &&
!drm_dp_has_quirk(&intel_dp->desc, intel_dp->edid_quirks,
DP_QUIRK_FORCE_DPCD_BACKLIGHT)) {
DRM_DEV_INFO(dev->dev,
intel_de_write(i915, HDCP_RPRIME(i915, cpu_transcoder, port), ri.reg);
/* Wait for Ri prime match */
- if (wait_for(intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)) &
+ if (wait_for((intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)) &
+ (HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC)) ==
(HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC), 1)) {
DRM_ERROR("Ri' mismatch detected, link check failed (%x)\n",
intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)));
}
}
-static bool gen12_plane_supports_mc_ccs(enum plane_id plane_id)
+static bool gen12_plane_supports_mc_ccs(struct drm_i915_private *dev_priv,
+ enum plane_id plane_id)
{
+ /* Wa_14010477008:tgl[a0..c0] */
+ if (IS_TGL_REVID(dev_priv, TGL_REVID_A0, TGL_REVID_C0))
+ return false;
+
return plane_id < PLANE_SPRITE4;
}
static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,
u32 format, u64 modifier)
{
+ struct drm_i915_private *dev_priv = to_i915(_plane->dev);
struct intel_plane *plane = to_intel_plane(_plane);
switch (modifier) {
case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
- if (!gen12_plane_supports_mc_ccs(plane->id))
+ if (!gen12_plane_supports_mc_ccs(dev_priv, plane->id))
return false;
/* fall through */
case DRM_FORMAT_MOD_LINEAR:
}
}
-static const u64 *gen12_get_plane_modifiers(enum plane_id plane_id)
+static const u64 *gen12_get_plane_modifiers(struct drm_i915_private *dev_priv,
+ enum plane_id plane_id)
{
- if (gen12_plane_supports_mc_ccs(plane_id))
+ if (gen12_plane_supports_mc_ccs(dev_priv, plane_id))
return gen12_plane_format_modifiers_mc_ccs;
else
return gen12_plane_format_modifiers_rc_ccs;
plane->has_ccs = skl_plane_has_ccs(dev_priv, pipe, plane_id);
if (INTEL_GEN(dev_priv) >= 12) {
- modifiers = gen12_get_plane_modifiers(plane_id);
+ modifiers = gen12_get_plane_modifiers(dev_priv, plane_id);
plane_funcs = &gen12_plane_funcs;
} else {
if (plane->has_ccs)
events = (GEN6_PM_RP_UP_THRESHOLD |
GEN6_PM_RP_DOWN_THRESHOLD |
GEN6_PM_RP_DOWN_TIMEOUT);
-
WRITE_ONCE(rps->pm_events, events);
+
spin_lock_irq(>->irq_lock);
gen6_gt_pm_enable_irq(gt, rps->pm_events);
spin_unlock_irq(>->irq_lock);
- set(gt->uncore, GEN6_PMINTRMSK, rps_pm_mask(rps, rps->cur_freq));
+ intel_uncore_write(gt->uncore,
+ GEN6_PMINTRMSK, rps_pm_mask(rps, rps->last_freq));
}
static void gen6_rps_reset_interrupts(struct intel_rps *rps)
struct intel_gt *gt = rps_to_gt(rps);
WRITE_ONCE(rps->pm_events, 0);
- set(gt->uncore, GEN6_PMINTRMSK, rps_pm_sanitize_mask(rps, ~0u));
+
+ intel_uncore_write(gt->uncore,
+ GEN6_PMINTRMSK, rps_pm_sanitize_mask(rps, ~0u));
spin_lock_irq(>->irq_lock);
gen6_gt_pm_disable_irq(gt, GEN6_PM_RPS_EVENTS);
struct work_struct release_work;
atomic_t released;
struct vfio_device *vfio_device;
+ struct vfio_group *vfio_group;
};
static inline struct kvmgt_vdev *kvmgt_vdev(struct intel_vgpu *vgpu)
unsigned long size)
{
struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
+ struct kvmgt_vdev *vdev = kvmgt_vdev(vgpu);
int total_pages;
int npage;
int ret;
for (npage = 0; npage < total_pages; npage++) {
unsigned long cur_gfn = gfn + npage;
- ret = vfio_unpin_pages(mdev_dev(kvmgt_vdev(vgpu)->mdev), &cur_gfn, 1);
+ ret = vfio_group_unpin_pages(vdev->vfio_group, &cur_gfn, 1);
drm_WARN_ON(&i915->drm, ret != 1);
}
}
static int gvt_pin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
unsigned long size, struct page **page)
{
+ struct kvmgt_vdev *vdev = kvmgt_vdev(vgpu);
unsigned long base_pfn = 0;
int total_pages;
int npage;
unsigned long cur_gfn = gfn + npage;
unsigned long pfn;
- ret = vfio_pin_pages(mdev_dev(kvmgt_vdev(vgpu)->mdev), &cur_gfn, 1,
- IOMMU_READ | IOMMU_WRITE, &pfn);
+ ret = vfio_group_pin_pages(vdev->vfio_group, &cur_gfn, 1,
+ IOMMU_READ | IOMMU_WRITE, &pfn);
if (ret != 1) {
gvt_vgpu_err("vfio_pin_pages failed for gfn 0x%lx, ret %d\n",
cur_gfn, ret);
struct kvmgt_vdev *vdev = kvmgt_vdev(vgpu);
unsigned long events;
int ret;
+ struct vfio_group *vfio_group;
vdev->iommu_notifier.notifier_call = intel_vgpu_iommu_notifier;
vdev->group_notifier.notifier_call = intel_vgpu_group_notifier;
goto undo_iommu;
}
+ vfio_group = vfio_group_get_external_user_from_dev(mdev_dev(mdev));
+ if (IS_ERR_OR_NULL(vfio_group)) {
+ ret = !vfio_group ? -EFAULT : PTR_ERR(vfio_group);
+ gvt_vgpu_err("vfio_group_get_external_user_from_dev failed\n");
+ goto undo_register;
+ }
+ vdev->vfio_group = vfio_group;
+
/* Take a module reference as mdev core doesn't take
* a reference for vendor driver.
*/
return ret;
undo_group:
+ vfio_group_put_external_user(vdev->vfio_group);
+ vdev->vfio_group = NULL;
+
+undo_register:
vfio_unregister_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY,
&vdev->group_notifier);
kvmgt_guest_exit(info);
intel_vgpu_release_msi_eventfd_ctx(vgpu);
+ vfio_group_put_external_user(vdev->vfio_group);
vdev->kvm = NULL;
vgpu->handle = 0;
void *buf, unsigned long len, bool write)
{
struct kvmgt_guest_info *info;
- struct kvm *kvm;
- int idx, ret;
- bool kthread = current->mm == NULL;
if (!handle_valid(handle))
return -ESRCH;
info = (struct kvmgt_guest_info *)handle;
- kvm = info->kvm;
-
- if (kthread) {
- if (!mmget_not_zero(kvm->mm))
- return -EFAULT;
- use_mm(kvm->mm);
- }
-
- idx = srcu_read_lock(&kvm->srcu);
- ret = write ? kvm_write_guest(kvm, gpa, buf, len) :
- kvm_read_guest(kvm, gpa, buf, len);
- srcu_read_unlock(&kvm->srcu, idx);
-
- if (kthread) {
- unuse_mm(kvm->mm);
- mmput(kvm->mm);
- }
- return ret;
+ return vfio_dma_rw(kvmgt_vdev(info->vgpu)->vfio_group,
+ gpa, buf, len, write);
}
static int kvmgt_read_gpa(unsigned long handle, unsigned long gpa,
(IS_ICELAKE(p) && IS_REVID(p, since, until))
#define TGL_REVID_A0 0x0
+#define TGL_REVID_B0 0x1
+#define TGL_REVID_C0 0x2
#define IS_TGL_REVID(p, since, until) \
(IS_TIGERLAKE(p) && IS_REVID(p, since, until))
}
/**
- * i915_perf_read_locked - &i915_perf_stream_ops->read with error normalisation
- * @stream: An i915 perf stream
- * @file: An i915 perf stream file
- * @buf: destination buffer given by userspace
- * @count: the number of bytes userspace wants to read
- * @ppos: (inout) file seek position (unused)
- *
- * Besides wrapping &i915_perf_stream_ops->read this provides a common place to
- * ensure that if we've successfully copied any data then reporting that takes
- * precedence over any internal error status, so the data isn't lost.
- *
- * For example ret will be -ENOSPC whenever there is more buffered data than
- * can be copied to userspace, but that's only interesting if we weren't able
- * to copy some data because it implies the userspace buffer is too small to
- * receive a single record (and we never split records).
- *
- * Another case with ret == -EFAULT is more of a grey area since it would seem
- * like bad form for userspace to ask us to overrun its buffer, but the user
- * knows best:
- *
- * http://yarchive.net/comp/linux/partial_reads_writes.html
- *
- * Returns: The number of bytes copied or a negative error code on failure.
- */
-static ssize_t i915_perf_read_locked(struct i915_perf_stream *stream,
- struct file *file,
- char __user *buf,
- size_t count,
- loff_t *ppos)
-{
- /* Note we keep the offset (aka bytes read) separate from any
- * error status so that the final check for whether we return
- * the bytes read with a higher precedence than any error (see
- * comment below) doesn't need to be handled/duplicated in
- * stream->ops->read() implementations.
- */
- size_t offset = 0;
- int ret = stream->ops->read(stream, buf, count, &offset);
-
- return offset ?: (ret ?: -EAGAIN);
-}
-
-/**
* i915_perf_read - handles read() FOP for i915 perf stream FDs
* @file: An i915 perf stream file
* @buf: destination buffer given by userspace
{
struct i915_perf_stream *stream = file->private_data;
struct i915_perf *perf = stream->perf;
- ssize_t ret;
+ size_t offset = 0;
+ int ret;
/* To ensure it's handled consistently we simply treat all reads of a
* disabled stream as an error. In particular it might otherwise lead
return ret;
mutex_lock(&perf->lock);
- ret = i915_perf_read_locked(stream, file,
- buf, count, ppos);
+ ret = stream->ops->read(stream, buf, count, &offset);
mutex_unlock(&perf->lock);
- } while (ret == -EAGAIN);
+ } while (!offset && !ret);
} else {
mutex_lock(&perf->lock);
- ret = i915_perf_read_locked(stream, file, buf, count, ppos);
+ ret = stream->ops->read(stream, buf, count, &offset);
mutex_unlock(&perf->lock);
}
* and read() returning -EAGAIN. Clearing the oa.pollin state here
* effectively ensures we back off until the next hrtimer callback
* before reporting another EPOLLIN event.
+ * The exception to this is if ops->read() returned -ENOSPC which means
+ * that more OA data is available than could fit in the user provided
+ * buffer. In this case we want the next poll() call to not block.
*/
- if (ret >= 0 || ret == -EAGAIN) {
- /* Maybe make ->pollin per-stream state if we support multiple
- * concurrent streams in the future.
- */
+ if (ret != -ENOSPC)
stream->pollin = false;
- }
- return ret;
+ /* Possible values for ret are 0, -EFAULT, -ENOSPC, -EIO, ... */
+ return offset ?: (ret ?: -EAGAIN);
}
static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer)
* Follow the style described here for new macros, and while changing existing
* macros. Do **not** mass change existing definitions just to update the style.
*
- * Layout
- * ~~~~~~
+ * File Layout
+ * ~~~~~~~~~~~
*
* Keep helper macros near the top. For example, _PIPE() and friends.
*
return PTR_ERR(dw_plat_data->regm);
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "Failed to get hdmi top irq\n");
+ if (irq < 0)
return irq;
- }
ret = devm_request_threaded_irq(dev, irq, dw_hdmi_top_irq,
dw_hdmi_top_thread_irq, IRQF_SHARED,
MODULE_FIRMWARE("nvidia/gp108/sec2/desc.bin");
MODULE_FIRMWARE("nvidia/gp108/sec2/image.bin");
MODULE_FIRMWARE("nvidia/gp108/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/gv100/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/gv100/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/gv100/sec2/sig.bin");
static const struct nvkm_sec2_fwif
gp108_sec2_fwif[] = {
return 0;
}
+MODULE_FIRMWARE("nvidia/tu102/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu102/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu102/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu104/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu104/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu104/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu106/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu106/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu106/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu116/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu116/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu116/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu117/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu117/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu117/sec2/sig.bin");
+
static const struct nvkm_sec2_fwif
tu102_sec2_fwif[] = {
{ 0, gp102_sec2_load, &tu102_sec2, &gp102_sec2_acr_1 },
*/
if ((sched->timeout != MAX_SCHEDULE_TIMEOUT &&
!cancel_delayed_work(&sched->work_tdr)) ||
- __kthread_should_park(sched->thread))
+ kthread_should_park())
return NULL;
spin_lock(&sched->job_list_lock);
return &state->base;
}
+static void tidss_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct tidss_crtc *tcrtc = to_tidss_crtc(crtc);
+
+ drm_crtc_cleanup(crtc);
+ kfree(tcrtc);
+}
+
static const struct drm_crtc_funcs tidss_crtc_funcs = {
.reset = tidss_crtc_reset,
- .destroy = drm_crtc_cleanup,
+ .destroy = tidss_crtc_destroy,
.set_config = drm_atomic_helper_set_config,
.page_flip = drm_atomic_helper_page_flip,
.atomic_duplicate_state = tidss_crtc_duplicate_state,
bool has_ctm = tidss->feat->vp_feat.color.has_ctm;
int ret;
- tcrtc = devm_kzalloc(tidss->dev, sizeof(*tcrtc), GFP_KERNEL);
+ tcrtc = kzalloc(sizeof(*tcrtc), GFP_KERNEL);
if (!tcrtc)
return ERR_PTR(-ENOMEM);
ret = drm_crtc_init_with_planes(&tidss->ddev, crtc, primary,
NULL, &tidss_crtc_funcs, NULL);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(tcrtc);
return ERR_PTR(ret);
+ }
drm_crtc_helper_add(crtc, &tidss_crtc_helper_funcs);
return 0;
}
+static void tidss_encoder_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+ kfree(encoder);
+}
+
static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
.atomic_check = tidss_encoder_atomic_check,
};
static const struct drm_encoder_funcs encoder_funcs = {
- .destroy = drm_encoder_cleanup,
+ .destroy = tidss_encoder_destroy,
};
struct drm_encoder *tidss_encoder_create(struct tidss_device *tidss,
struct drm_encoder *enc;
int ret;
- enc = devm_kzalloc(tidss->dev, sizeof(*enc), GFP_KERNEL);
+ enc = kzalloc(sizeof(*enc), GFP_KERNEL);
if (!enc)
return ERR_PTR(-ENOMEM);
ret = drm_encoder_init(&tidss->ddev, enc, &encoder_funcs,
encoder_type, NULL);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(enc);
return ERR_PTR(ret);
+ }
drm_encoder_helper_add(enc, &encoder_helper_funcs);
dispc_plane_enable(tidss->dispc, tplane->hw_plane_id, false);
}
+static void drm_plane_destroy(struct drm_plane *plane)
+{
+ struct tidss_plane *tplane = to_tidss_plane(plane);
+
+ drm_plane_cleanup(plane);
+ kfree(tplane);
+}
+
static const struct drm_plane_helper_funcs tidss_plane_helper_funcs = {
.atomic_check = tidss_plane_atomic_check,
.atomic_update = tidss_plane_atomic_update,
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.reset = drm_atomic_helper_plane_reset,
- .destroy = drm_plane_cleanup,
+ .destroy = drm_plane_destroy,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
BIT(DRM_MODE_BLEND_COVERAGE));
int ret;
- tplane = devm_kzalloc(tidss->dev, sizeof(*tplane), GFP_KERNEL);
+ tplane = kzalloc(sizeof(*tplane), GFP_KERNEL);
if (!tplane)
return ERR_PTR(-ENOMEM);
formats, num_formats,
NULL, type, NULL);
if (ret < 0)
- return ERR_PTR(ret);
+ goto err;
drm_plane_helper_add(&tplane->plane, &tidss_plane_helper_funcs);
default_encoding,
default_range);
if (ret)
- return ERR_PTR(ret);
+ goto err;
ret = drm_plane_create_alpha_property(&tplane->plane);
if (ret)
- return ERR_PTR(ret);
+ goto err;
ret = drm_plane_create_blend_mode_property(&tplane->plane, blend_modes);
if (ret)
- return ERR_PTR(ret);
+ goto err;
return tplane;
+
+err:
+ kfree(tplane);
+ return ERR_PTR(ret);
}
#include <linux/file.h>
#include <linux/sync_file.h>
+#include <linux/uaccess.h>
#include <drm/drm_file.h>
#include <drm/virtgpu_drm.h>
#include <linux/virtio.h>
#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
#include <drm/drm_file.h>
{
struct vmbus_channel_message_header hdr;
+ if (xchg(&vmbus_connection.conn_state, DISCONNECTED) == DISCONNECTED)
+ return;
+
/* Pre-Win2012R2 hosts don't support reconnect */
if (vmbus_proto_version < VERSION_WIN8_1)
return;
shared_sint.vector = HYPERVISOR_CALLBACK_VECTOR;
shared_sint.masked = false;
- if (ms_hyperv.hints & HV_DEPRECATING_AEOI_RECOMMENDED)
- shared_sint.auto_eoi = false;
- else
- shared_sint.auto_eoi = true;
-
+ shared_sint.auto_eoi = hv_recommend_using_aeoi();
hv_set_synint_state(VMBUS_MESSAGE_SINT, shared_sint.as_uint64);
/* Enable the global synic bit */
#include "hyperv_vmbus.h"
-struct dentry *hv_debug_root;
+static struct dentry *hv_debug_root;
static int hv_debugfs_delay_get(void *data, u64 *val)
{
__field(int, ret)
),
TP_fast_assign(
- memcpy(__entry->guest_id, &msg->guest_endpoint_id.b, 16);
- memcpy(__entry->host_id, &msg->host_service_id.b, 16);
+ export_guid(__entry->guest_id, &msg->guest_endpoint_id);
+ export_guid(__entry->host_id, &msg->host_service_id);
__entry->ret = ret;
),
TP_printk("sending guest_endpoint_id %pUl, host_service_id %pUl, "
struct list_head msglist_entry;
/* The message itself */
- unsigned char msg[0];
+ unsigned char msg[];
};
#include <linux/kdebug.h>
#include <linux/efi.h>
#include <linux/random.h>
+#include <linux/kernel.h>
#include <linux/syscore_ops.h>
#include <clocksource/hyperv_timer.h>
#include "hyperv_vmbus.h"
static void *hv_panic_page;
+/*
+ * Boolean to control whether to report panic messages over Hyper-V.
+ *
+ * It can be set via /proc/sys/kernel/hyperv/record_panic_msg
+ */
+static int sysctl_record_panic_msg = 1;
+
+static int hyperv_report_reg(void)
+{
+ return !sysctl_record_panic_msg || !hv_panic_page;
+}
+
static int hyperv_panic_event(struct notifier_block *nb, unsigned long val,
void *args)
{
struct pt_regs *regs;
- regs = current_pt_regs();
+ vmbus_initiate_unload(true);
- hyperv_report_panic(regs, val);
+ /*
+ * Hyper-V should be notified only once about a panic. If we will be
+ * doing hyperv_report_panic_msg() later with kmsg data, don't do
+ * the notification here.
+ */
+ if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE
+ && hyperv_report_reg()) {
+ regs = current_pt_regs();
+ hyperv_report_panic(regs, val, false);
+ }
return NOTIFY_DONE;
}
struct die_args *die = (struct die_args *)args;
struct pt_regs *regs = die->regs;
- hyperv_report_panic(regs, val);
+ /*
+ * Hyper-V should be notified only once about a panic. If we will be
+ * doing hyperv_report_panic_msg() later with kmsg data, don't do
+ * the notification here.
+ */
+ if (hyperv_report_reg())
+ hyperv_report_panic(regs, val, true);
return NOTIFY_DONE;
}
return drv->resume(dev);
}
+#else
+#define vmbus_suspend NULL
+#define vmbus_resume NULL
#endif /* CONFIG_PM_SLEEP */
/*
}
/*
- * Note: we must use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS rather than
- * SET_SYSTEM_SLEEP_PM_OPS: see the comment before vmbus_bus_pm.
+ * Note: we must use the "noirq" ops: see the comment before vmbus_bus_pm.
+ *
+ * suspend_noirq/resume_noirq are set to NULL to support Suspend-to-Idle: we
+ * shouldn't suspend the vmbus devices upon Suspend-to-Idle, otherwise there
+ * is no way to wake up a Generation-2 VM.
+ *
+ * The other 4 ops are for hibernation.
*/
+
static const struct dev_pm_ops vmbus_pm = {
- SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(vmbus_suspend, vmbus_resume)
+ .suspend_noirq = NULL,
+ .resume_noirq = NULL,
+ .freeze_noirq = vmbus_suspend,
+ .thaw_noirq = vmbus_resume,
+ .poweroff_noirq = vmbus_suspend,
+ .restore_noirq = vmbus_resume,
};
/* The one and only one */
}
/*
- * Boolean to control whether to report panic messages over Hyper-V.
- *
- * It can be set via /proc/sys/kernel/hyperv/record_panic_msg
- */
-static int sysctl_record_panic_msg = 1;
-
-/*
* Callback from kmsg_dump. Grab as much as possible from the end of the kmsg
* buffer and call into Hyper-V to transfer the data.
*/
hv_panic_page = (void *)hv_alloc_hyperv_zeroed_page();
if (hv_panic_page) {
ret = kmsg_dump_register(&hv_kmsg_dumper);
- if (ret)
+ if (ret) {
pr_err("Hyper-V: kmsg dump register "
"error 0x%x\n", ret);
+ hv_free_hyperv_page(
+ (unsigned long)hv_panic_page);
+ hv_panic_page = NULL;
+ }
} else
pr_err("Hyper-V: panic message page memory "
"allocation failed");
}
register_die_notifier(&hyperv_die_block);
- atomic_notifier_chain_register(&panic_notifier_list,
- &hyperv_panic_block);
}
+ /*
+ * Always register the panic notifier because we need to unload
+ * the VMbus channel connection to prevent any VMbus
+ * activity after the VM panics.
+ */
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &hyperv_panic_block);
+
vmbus_request_offers();
return 0;
hv_remove_vmbus_irq();
bus_unregister(&hv_bus);
- hv_free_hyperv_page((unsigned long)hv_panic_page);
unregister_sysctl_table(hv_ctl_table_hdr);
hv_ctl_table_hdr = NULL;
return ret;
vmbus_initiate_unload(false);
- vmbus_connection.conn_state = DISCONNECTED;
-
/* Reset the event for the next resume. */
reinit_completion(&vmbus_connection.ready_for_resume_event);
return 0;
}
+#else
+#define vmbus_bus_suspend NULL
+#define vmbus_bus_resume NULL
#endif /* CONFIG_PM_SLEEP */
static const struct acpi_device_id vmbus_acpi_device_ids[] = {
MODULE_DEVICE_TABLE(acpi, vmbus_acpi_device_ids);
/*
- * Note: we must use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS rather than
- * SET_SYSTEM_SLEEP_PM_OPS, otherwise NIC SR-IOV can not work, because the
- * "pci_dev_pm_ops" uses the "noirq" callbacks: in the resume path, the
- * pci "noirq" restore callback runs before "non-noirq" callbacks (see
+ * Note: we must use the "no_irq" ops, otherwise hibernation can not work with
+ * PCI device assignment, because "pci_dev_pm_ops" uses the "noirq" ops: in
+ * the resume path, the pci "noirq" restore op runs before "non-noirq" op (see
* resume_target_kernel() -> dpm_resume_start(), and hibernation_restore() ->
* dpm_resume_end()). This means vmbus_bus_resume() and the pci-hyperv's
- * resume callback must also run via the "noirq" callbacks.
+ * resume callback must also run via the "noirq" ops.
+ *
+ * Set suspend_noirq/resume_noirq to NULL for Suspend-to-Idle: see the comment
+ * earlier in this file before vmbus_pm.
*/
+
static const struct dev_pm_ops vmbus_bus_pm = {
- SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(vmbus_bus_suspend, vmbus_bus_resume)
+ .suspend_noirq = NULL,
+ .resume_noirq = NULL,
+ .freeze_noirq = vmbus_bus_suspend,
+ .thaw_noirq = vmbus_bus_resume,
+ .poweroff_noirq = vmbus_bus_suspend,
+ .restore_noirq = vmbus_bus_resume
};
static struct acpi_driver vmbus_acpi_driver = {
{
hv_stimer_global_cleanup();
vmbus_initiate_unload(false);
- vmbus_connection.conn_state = DISCONNECTED;
/* Make sure conn_state is set as hv_synic_cleanup checks for it */
mb();
cpuhp_remove_state(hyperv_cpuhp_online);
* doing the cleanup for current CPU only. This should be sufficient
* for kdump.
*/
- vmbus_connection.conn_state = DISCONNECTED;
cpu = smp_processor_id();
hv_stimer_cleanup(cpu);
hv_synic_disable_regs(cpu);
hard disk drives.
This driver can also be built as a module. If so, the module
- will be called satatemp.
+ will be called drivetemp.
config SENSORS_DS620
tristate "Dallas Semiconductor DS620"
return err;
switch (attr) {
case hwmon_temp_input:
+ if (!temp_is_valid(buf[SCT_STATUS_TEMP]))
+ return -ENODATA;
*val = temp_from_sct(buf[SCT_STATUS_TEMP]);
break;
case hwmon_temp_lowest:
+ if (!temp_is_valid(buf[SCT_STATUS_TEMP_LOWEST]))
+ return -ENODATA;
*val = temp_from_sct(buf[SCT_STATUS_TEMP_LOWEST]);
break;
case hwmon_temp_highest:
+ if (!temp_is_valid(buf[SCT_STATUS_TEMP_HIGHEST]))
+ return -ENODATA;
*val = temp_from_sct(buf[SCT_STATUS_TEMP_HIGHEST]);
break;
default:
}
data->config = config;
- hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
data, &jc42_chip_info,
NULL);
return PTR_ERR_OR_ZERO(hwmon_dev);
return temp;
}
-const char *k10temp_temp_label[] = {
+static const char *k10temp_temp_label[] = {
"Tctl",
"Tdie",
"Tccd1",
"Tccd8",
};
-const char *k10temp_in_label[] = {
+static const char *k10temp_in_label[] = {
"Vcore",
"Vsoc",
};
-const char *k10temp_curr_label[] = {
+static const char *k10temp_curr_label[] = {
"Icore",
"Isoc",
};
#define ISL68137_VOUT_AVS 0x30
#define RAA_DMPVR2_READ_VMON 0xc8
-enum versions {
+enum chips {
isl68137,
+ isl68220,
+ isl68221,
+ isl68222,
+ isl68223,
+ isl68224,
+ isl68225,
+ isl68226,
+ isl68227,
+ isl68229,
+ isl68233,
+ isl68239,
+ isl69222,
+ isl69223,
+ isl69224,
+ isl69225,
+ isl69227,
+ isl69228,
+ isl69234,
+ isl69236,
+ isl69239,
+ isl69242,
+ isl69243,
+ isl69247,
+ isl69248,
+ isl69254,
+ isl69255,
+ isl69256,
+ isl69259,
+ isl69260,
+ isl69268,
+ isl69269,
+ isl69298,
+ raa228000,
+ raa228004,
+ raa228006,
+ raa228228,
+ raa229001,
+ raa229004,
+};
+
+enum variants {
+ raa_dmpvr1_2rail,
raa_dmpvr2_1rail,
raa_dmpvr2_2rail,
raa_dmpvr2_3rail,
memcpy(info, &raa_dmpvr_info, sizeof(*info));
switch (id->driver_data) {
- case isl68137:
+ case raa_dmpvr1_2rail:
info->pages = 2;
info->R[PSC_VOLTAGE_IN] = 3;
info->func[0] &= ~PMBUS_HAVE_VMON;
}
static const struct i2c_device_id raa_dmpvr_id[] = {
- {"isl68137", isl68137},
- {"raa_dmpvr2_1rail", raa_dmpvr2_1rail},
- {"raa_dmpvr2_2rail", raa_dmpvr2_2rail},
- {"raa_dmpvr2_3rail", raa_dmpvr2_3rail},
- {"raa_dmpvr2_hv", raa_dmpvr2_hv},
+ {"isl68137", raa_dmpvr1_2rail},
+ {"isl68220", raa_dmpvr2_2rail},
+ {"isl68221", raa_dmpvr2_3rail},
+ {"isl68222", raa_dmpvr2_2rail},
+ {"isl68223", raa_dmpvr2_2rail},
+ {"isl68224", raa_dmpvr2_3rail},
+ {"isl68225", raa_dmpvr2_2rail},
+ {"isl68226", raa_dmpvr2_3rail},
+ {"isl68227", raa_dmpvr2_1rail},
+ {"isl68229", raa_dmpvr2_3rail},
+ {"isl68233", raa_dmpvr2_2rail},
+ {"isl68239", raa_dmpvr2_3rail},
+
+ {"isl69222", raa_dmpvr2_2rail},
+ {"isl69223", raa_dmpvr2_3rail},
+ {"isl69224", raa_dmpvr2_2rail},
+ {"isl69225", raa_dmpvr2_2rail},
+ {"isl69227", raa_dmpvr2_3rail},
+ {"isl69228", raa_dmpvr2_3rail},
+ {"isl69234", raa_dmpvr2_2rail},
+ {"isl69236", raa_dmpvr2_2rail},
+ {"isl69239", raa_dmpvr2_3rail},
+ {"isl69242", raa_dmpvr2_2rail},
+ {"isl69243", raa_dmpvr2_1rail},
+ {"isl69247", raa_dmpvr2_2rail},
+ {"isl69248", raa_dmpvr2_2rail},
+ {"isl69254", raa_dmpvr2_2rail},
+ {"isl69255", raa_dmpvr2_2rail},
+ {"isl69256", raa_dmpvr2_2rail},
+ {"isl69259", raa_dmpvr2_2rail},
+ {"isl69260", raa_dmpvr2_2rail},
+ {"isl69268", raa_dmpvr2_2rail},
+ {"isl69269", raa_dmpvr2_3rail},
+ {"isl69298", raa_dmpvr2_2rail},
+
+ {"raa228000", raa_dmpvr2_hv},
+ {"raa228004", raa_dmpvr2_hv},
+ {"raa228006", raa_dmpvr2_hv},
+ {"raa228228", raa_dmpvr2_2rail},
+ {"raa229001", raa_dmpvr2_2rail},
+ {"raa229004", raa_dmpvr2_2rail},
{}
};
struct altr_i2c_dev *idev = NULL;
struct resource *res;
int irq, ret;
- u32 val;
idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
if (!idev)
init_completion(&idev->msg_complete);
spin_lock_init(&idev->lock);
- val = device_property_read_u32(idev->dev, "fifo-size",
+ ret = device_property_read_u32(idev->dev, "fifo-size",
&idev->fifo_size);
- if (val) {
+ if (ret) {
dev_err(&pdev->dev, "FIFO size set to default of %d\n",
ALTR_I2C_DFLT_FIFO_SZ);
idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ;
}
- val = device_property_read_u32(idev->dev, "clock-frequency",
+ ret = device_property_read_u32(idev->dev, "clock-frequency",
&idev->bus_clk_rate);
- if (val) {
+ if (ret) {
dev_err(&pdev->dev, "Default to 100kHz\n");
idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */
}
adap->dev.of_node = pdev->dev.of_node;
adap->nr = -1;
- dev_pm_set_driver_flags(&pdev->dev,
- DPM_FLAG_SMART_PREPARE |
- DPM_FLAG_SMART_SUSPEND |
- DPM_FLAG_LEAVE_SUSPENDED);
+ if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
+ dev_pm_set_driver_flags(&pdev->dev,
+ DPM_FLAG_SMART_PREPARE |
+ DPM_FLAG_LEAVE_SUSPENDED);
+ } else {
+ dev_pm_set_driver_flags(&pdev->dev,
+ DPM_FLAG_SMART_PREPARE |
+ DPM_FLAG_SMART_SUSPEND |
+ DPM_FLAG_LEAVE_SUSPENDED);
+ }
/* The code below assumes runtime PM to be disabled. */
WARN_ON(pm_runtime_enabled(&pdev->dev));
do {
u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS);
- if (status) {
+ if (status)
tegra_i2c_isr(i2c_dev->irq, i2c_dev);
- if (completion_done(complete)) {
- s64 delta = ktime_ms_delta(ktimeout, ktime);
+ if (completion_done(complete)) {
+ s64 delta = ktime_ms_delta(ktimeout, ktime);
- return msecs_to_jiffies(delta) ?: 1;
- }
+ return msecs_to_jiffies(delta) ?: 1;
}
ktime = ktime_get();
disable_irq(i2c_dev->irq);
/*
- * There is a chance that completion may happen after IRQ
- * synchronization, which is done by disable_irq().
+ * Under some rare circumstances (like running KASAN +
+ * NFS root) CPU, which handles interrupt, may stuck in
+ * uninterruptible state for a significant time. In this
+ * case we will get timeout if I2C transfer is running on
+ * a sibling CPU, despite of IRQ being raised.
+ *
+ * In order to handle this rare condition, the IRQ status
+ * needs to be checked after timeout.
*/
- if (ret == 0 && completion_done(complete)) {
- dev_warn(i2c_dev->dev,
- "completion done after timeout\n");
- ret = 1;
- }
+ if (ret == 0)
+ ret = tegra_i2c_poll_completion_timeout(i2c_dev,
+ complete, 0);
}
return ret;
time_left = tegra_i2c_wait_completion_timeout(
i2c_dev, &i2c_dev->dma_complete, xfer_time);
+ /*
+ * Synchronize DMA first, since dmaengine_terminate_sync()
+ * performs synchronization after the transfer's termination
+ * and we want to get a completion if transfer succeeded.
+ */
+ dmaengine_synchronize(i2c_dev->msg_read ?
+ i2c_dev->rx_dma_chan :
+ i2c_dev->tx_dma_chan);
+
dmaengine_terminate_sync(i2c_dev->msg_read ?
i2c_dev->rx_dma_chan :
i2c_dev->tx_dma_chan);
}
EXPORT_SYMBOL_GPL(i2c_new_scanned_device);
-struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
- struct i2c_board_info *info,
- unsigned short const *addr_list,
- int (*probe)(struct i2c_adapter *adap, unsigned short addr))
-{
- struct i2c_client *client;
-
- client = i2c_new_scanned_device(adap, info, addr_list, probe);
- return IS_ERR(client) ? NULL : client;
-}
-EXPORT_SYMBOL_GPL(i2c_new_probed_device);
-
struct i2c_adapter *i2c_get_adapter(int nr)
{
struct i2c_adapter *adapter;
#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */
/* ID Register Bit Designations (AD7192_REG_ID) */
-#define ID_AD7190 0x4
-#define ID_AD7192 0x0
-#define ID_AD7193 0x2
-#define ID_AD7195 0x6
+#define CHIPID_AD7190 0x4
+#define CHIPID_AD7192 0x0
+#define CHIPID_AD7193 0x2
+#define CHIPID_AD7195 0x6
#define AD7192_ID_MASK 0x0F
/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
AD7192_SYSCALIB_FULL_SCALE,
};
+enum {
+ ID_AD7190,
+ ID_AD7192,
+ ID_AD7193,
+ ID_AD7195,
+};
+
+struct ad7192_chip_info {
+ unsigned int chip_id;
+ const char *name;
+};
+
struct ad7192_state {
+ const struct ad7192_chip_info *chip_info;
struct regulator *avdd;
struct regulator *dvdd;
struct clk *mclk;
u32 conf;
u32 scale_avail[8][2];
u8 gpocon;
- u8 devid;
u8 clock_sel;
struct mutex lock; /* protect sensor state */
u8 syscalib_mode[8];
id &= AD7192_ID_MASK;
- if (id != st->devid)
+ if (id != st->chip_info->chip_id)
dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
id);
st->mode |= AD7192_MODE_REJ60;
refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable");
- if (refin2_en && st->devid != ID_AD7195)
+ if (refin2_en && st->chip_info->chip_id != CHIPID_AD7195)
st->conf |= AD7192_CONF_REFSEL;
st->conf &= ~AD7192_CONF_CHOP;
IIO_CHAN_SOFT_TIMESTAMP(14),
};
+static const struct ad7192_chip_info ad7192_chip_info_tbl[] = {
+ [ID_AD7190] = {
+ .chip_id = CHIPID_AD7190,
+ .name = "ad7190",
+ },
+ [ID_AD7192] = {
+ .chip_id = CHIPID_AD7192,
+ .name = "ad7192",
+ },
+ [ID_AD7193] = {
+ .chip_id = CHIPID_AD7193,
+ .name = "ad7193",
+ },
+ [ID_AD7195] = {
+ .chip_id = CHIPID_AD7195,
+ .name = "ad7195",
+ },
+};
+
static int ad7192_channels_config(struct iio_dev *indio_dev)
{
struct ad7192_state *st = iio_priv(indio_dev);
- switch (st->devid) {
- case ID_AD7193:
+ switch (st->chip_info->chip_id) {
+ case CHIPID_AD7193:
indio_dev->channels = ad7193_channels;
indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
break;
}
static const struct of_device_id ad7192_of_match[] = {
- { .compatible = "adi,ad7190", .data = (void *)ID_AD7190 },
- { .compatible = "adi,ad7192", .data = (void *)ID_AD7192 },
- { .compatible = "adi,ad7193", .data = (void *)ID_AD7193 },
- { .compatible = "adi,ad7195", .data = (void *)ID_AD7195 },
+ { .compatible = "adi,ad7190", .data = &ad7192_chip_info_tbl[ID_AD7190] },
+ { .compatible = "adi,ad7192", .data = &ad7192_chip_info_tbl[ID_AD7192] },
+ { .compatible = "adi,ad7193", .data = &ad7192_chip_info_tbl[ID_AD7193] },
+ { .compatible = "adi,ad7195", .data = &ad7192_chip_info_tbl[ID_AD7195] },
{}
};
MODULE_DEVICE_TABLE(of, ad7192_of_match);
}
spi_set_drvdata(spi, indio_dev);
- st->devid = (unsigned long)of_device_get_match_data(&spi->dev);
+ st->chip_info = of_device_get_match_data(&spi->dev);
indio_dev->dev.parent = &spi->dev;
- indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->name = st->chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = ad7192_channels_config(indio_dev);
if (ret < 0)
goto error_disable_dvdd;
- if (st->devid == ID_AD7195)
+ if (st->chip_info->chip_id == CHIPID_AD7195)
indio_dev->info = &ad7195_info;
else
indio_dev->info = &ad7192_info;
.read_raw = &ad7793_read_raw,
.write_raw = &ad7793_write_raw,
.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
- .attrs = &ad7793_attribute_group,
+ .attrs = &ad7797_attribute_group,
.validate_trigger = ad_sd_validate_trigger,
};
static void stm32_adc_dma_buffer_done(void *data)
{
struct iio_dev *indio_dev = data;
+ struct stm32_adc *adc = iio_priv(indio_dev);
+ int residue = stm32_adc_dma_residue(adc);
+
+ /*
+ * In DMA mode the trigger services of IIO are not used
+ * (e.g. no call to iio_trigger_poll).
+ * Calling irq handler associated to the hardware trigger is not
+ * relevant as the conversions have already been done. Data
+ * transfers are performed directly in DMA callback instead.
+ * This implementation avoids to call trigger irq handler that
+ * may sleep, in an atomic context (DMA irq handler context).
+ */
+ dev_dbg(&indio_dev->dev, "%s bufi=%d\n", __func__, adc->bufi);
- iio_trigger_poll_chained(indio_dev->trig);
+ while (residue >= indio_dev->scan_bytes) {
+ u16 *buffer = (u16 *)&adc->rx_buf[adc->bufi];
+
+ iio_push_to_buffers(indio_dev, buffer);
+
+ residue -= indio_dev->scan_bytes;
+ adc->bufi += indio_dev->scan_bytes;
+ if (adc->bufi >= adc->rx_buf_sz)
+ adc->bufi = 0;
+ }
}
static int stm32_adc_dma_start(struct iio_dev *indio_dev)
{
struct iio_dev *indio_dev;
struct device *dev = &pdev->dev;
+ irqreturn_t (*handler)(int irq, void *p) = NULL;
struct stm32_adc *adc;
int ret;
if (ret < 0)
return ret;
+ if (!adc->dma_chan)
+ handler = &stm32_adc_trigger_handler;
+
ret = iio_triggered_buffer_setup(indio_dev,
- &iio_pollfunc_store_time,
- &stm32_adc_trigger_handler,
+ &iio_pollfunc_store_time, handler,
&stm32_adc_buffer_setup_ops);
if (ret) {
dev_err(&pdev->dev, "buffer setup failed\n");
struct mutex lock;
u8 tx_buf ____cacheline_aligned;
- u16 rx_buf;
+ u8 rx_buf[3];
};
#define ADS8344_VOLTAGE_CHANNEL(chan, si) \
udelay(9);
- ret = spi_read(spi, &adc->rx_buf, 2);
+ ret = spi_read(spi, adc->rx_buf, sizeof(adc->rx_buf));
if (ret)
return ret;
- return adc->rx_buf;
+ return adc->rx_buf[0] << 9 | adc->rx_buf[1] << 1 | adc->rx_buf[2] >> 7;
}
static int ads8344_read_raw(struct iio_dev *iio,
#define XADC_FLAGS_BUFFERED BIT(0)
+/*
+ * The XADC hardware supports a samplerate of up to 1MSPS. Unfortunately it does
+ * not have a hardware FIFO. Which means an interrupt is generated for each
+ * conversion sequence. At 1MSPS sample rate the CPU in ZYNQ7000 is completely
+ * overloaded by the interrupts that it soft-lockups. For this reason the driver
+ * limits the maximum samplerate 150kSPS. At this rate the CPU is fairly busy,
+ * but still responsive.
+ */
+#define XADC_MAX_SAMPLERATE 150000
+
static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
uint32_t val)
{
spin_lock_irqsave(&xadc->lock, flags);
xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
- xadc_write_reg(xadc, XADC_AXI_REG_IPISR, val & XADC_AXI_INT_EOS);
+ xadc_write_reg(xadc, XADC_AXI_REG_IPISR, XADC_AXI_INT_EOS);
if (state)
val |= XADC_AXI_INT_EOS;
else
{
uint16_t val;
+ /* Powerdown the ADC-B when it is not needed. */
switch (seq_mode) {
case XADC_CONF1_SEQ_SIMULTANEOUS:
case XADC_CONF1_SEQ_INDEPENDENT:
- val = XADC_CONF2_PD_ADC_B;
+ val = 0;
break;
default:
- val = 0;
+ val = XADC_CONF2_PD_ADC_B;
break;
}
if (ret)
goto err;
+ /*
+ * In simultaneous mode the upper and lower aux channels are samples at
+ * the same time. In this mode the upper 8 bits in the sequencer
+ * register are don't care and the lower 8 bits control two channels
+ * each. As such we must set the bit if either the channel in the lower
+ * group or the upper group is enabled.
+ */
+ if (seq_mode == XADC_CONF1_SEQ_SIMULTANEOUS)
+ scan_mask = ((scan_mask >> 8) | scan_mask) & 0xff0000;
+
ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
if (ret)
goto err;
.postdisable = &xadc_postdisable,
};
+static int xadc_read_samplerate(struct xadc *xadc)
+{
+ unsigned int div;
+ uint16_t val16;
+ int ret;
+
+ ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
+ if (ret)
+ return ret;
+
+ div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
+ if (div < 2)
+ div = 2;
+
+ return xadc_get_dclk_rate(xadc) / div / 26;
+}
+
static int xadc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long info)
{
struct xadc *xadc = iio_priv(indio_dev);
- unsigned int div;
uint16_t val16;
int ret;
*val = -((273150 << 12) / 503975);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
- ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
- if (ret)
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
return ret;
- div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
- if (div < 2)
- div = 2;
-
- *val = xadc_get_dclk_rate(xadc) / div / 26;
-
+ *val = ret;
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
-static int xadc_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int val, int val2, long info)
+static int xadc_write_samplerate(struct xadc *xadc, int val)
{
- struct xadc *xadc = iio_priv(indio_dev);
unsigned long clk_rate = xadc_get_dclk_rate(xadc);
unsigned int div;
if (!clk_rate)
return -EINVAL;
- if (info != IIO_CHAN_INFO_SAMP_FREQ)
- return -EINVAL;
-
if (val <= 0)
return -EINVAL;
/* Max. 150 kSPS */
- if (val > 150000)
- val = 150000;
+ if (val > XADC_MAX_SAMPLERATE)
+ val = XADC_MAX_SAMPLERATE;
val *= 26;
* limit.
*/
div = clk_rate / val;
- if (clk_rate / div / 26 > 150000)
+ if (clk_rate / div / 26 > XADC_MAX_SAMPLERATE)
div++;
if (div < 2)
div = 2;
div << XADC_CONF2_DIV_OFFSET);
}
+static int xadc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long info)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+
+ if (info != IIO_CHAN_INFO_SAMP_FREQ)
+ return -EINVAL;
+
+ return xadc_write_samplerate(xadc, val);
+}
+
static const struct iio_event_spec xadc_temp_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
if (ret)
goto err_free_samplerate_trigger;
+ /*
+ * Make sure not to exceed the maximum samplerate since otherwise the
+ * resulting interrupt storm will soft-lock the system.
+ */
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ if (ret > XADC_MAX_SAMPLERATE) {
+ ret = xadc_write_samplerate(xadc, XADC_MAX_SAMPLERATE);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ }
+ }
+
ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0,
dev_name(&pdev->dev), indio_dev);
if (ret)
struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
- if (!sdata->sensor_settings->odr.addr)
+ if (!sdata->sensor_settings->odr.mask)
return 0;
err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
ret = fwnode_property_read_u32(child, "num", &num);
if (ret)
return ret;
- if (num > AD5770R_MAX_CHANNELS)
+ if (num >= AD5770R_MAX_CHANNELS)
return -EINVAL;
ret = fwnode_property_read_u32_array(child,
if (result)
goto out_unlock;
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
result = inv_mpu6050_switch_engine(st, true, st->suspended_sensors);
if (result)
goto out_unlock;
mutex_lock(&st->lock);
+ st->suspended_sensors = 0;
+ if (pm_runtime_suspended(dev)) {
+ result = 0;
+ goto out_unlock;
+ }
+
if (iio_buffer_enabled(indio_dev)) {
result = inv_mpu6050_prepare_fifo(st, false);
if (result)
goto out_unlock;
}
- st->suspended_sensors = 0;
if (st->chip_config.accl_en)
st->suspended_sensors |= INV_MPU6050_SENSOR_ACCL;
if (st->chip_config.gyro_en)
* @gain: Configured sensor sensitivity.
* @odr: Output data rate of the sensor [Hz].
* @watermark: Sensor watermark level.
+ * @decimator: Sensor decimation factor.
* @sip: Number of samples in a given pattern.
* @ts_ref: Sensor timestamp reference for hw one.
* @ext_info: Sensor settings if it is connected to i2c controller
u32 odr;
u16 watermark;
+ u8 decimator;
u8 sip;
s64 ts_ref;
struct {
const struct st_lsm6dsx_ext_dev_settings *settings;
+ u32 slv_odr;
u8 addr;
} ext_info;
};
break;
}
+ sensor->decimator = decimator;
return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
}
int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
- int err, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
+ int err, sip, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
u8 gyro_buff[ST_LSM6DSX_IIO_BUFF_SIZE];
acc_sip = acc_sensor->sip;
ts_sip = hw->ts_sip;
offset = 0;
+ sip = 0;
while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
- if (gyro_sip > 0) {
+ if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
memcpy(gyro_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
- if (acc_sip > 0) {
+ if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
memcpy(acc_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
- if (ext_sip > 0) {
+ if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
memcpy(ext_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
- if (gyro_sip-- > 0)
+ if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_GYRO],
gyro_buff, gyro_sensor->ts_ref + ts);
- if (acc_sip-- > 0)
+ gyro_sip--;
+ }
+ if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_ACC],
acc_buff, acc_sensor->ts_ref + ts);
- if (ext_sip-- > 0)
+ acc_sip--;
+ }
+ if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_EXT0],
ext_buff, ext_sensor->ts_ref + ts);
+ ext_sip--;
+ }
+ sip++;
}
}
return 0;
}
-static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
+static int st_lsm6dsx_reset_device(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_reg *reg;
int err;
+ /*
+ * flush hw FIFO before device reset in order to avoid
+ * possible races on interrupt line 1. If the first interrupt
+ * line is asserted during hw reset the device will work in
+ * I3C-only mode (if it is supported)
+ */
+ err = st_lsm6dsx_flush_fifo(hw);
+ if (err < 0 && err != -ENOTSUPP)
+ return err;
+
/* device sw reset */
reg = &hw->settings->reset;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
msleep(50);
+ return 0;
+}
+
+static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
+{
+ const struct st_lsm6dsx_reg *reg;
+ int err;
+
+ err = st_lsm6dsx_reset_device(hw);
+ if (err < 0)
+ return err;
+
/* enable Block Data Update */
reg = &hw->settings->bdu;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
settings = sensor->ext_info.settings;
if (enable) {
- err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr);
+ err = st_lsm6dsx_shub_set_odr(sensor,
+ sensor->ext_info.slv_odr);
if (err < 0)
return err;
} else {
if (err < 0)
return err;
- delay = 1000000000 / sensor->odr;
+ delay = 1000000000 / sensor->ext_info.slv_odr;
usleep_range(delay, 2 * delay);
len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
iio_device_release_direct_mode(iio_dev);
break;
case IIO_CHAN_INFO_SAMP_FREQ:
- *val = sensor->odr / 1000;
- *val2 = (sensor->odr % 1000) * 1000;
+ *val = sensor->ext_info.slv_odr / 1000;
+ *val2 = (sensor->ext_info.slv_odr % 1000) * 1000;
ret = IIO_VAL_INT_PLUS_MICRO;
break;
case IIO_CHAN_INFO_SCALE:
val = val * 1000 + val2 / 1000;
err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
- if (!err)
- sensor->odr = val;
+ if (!err) {
+ struct st_lsm6dsx_hw *hw = sensor->hw;
+ struct st_lsm6dsx_sensor *ref_sensor;
+ u8 odr_val;
+ int odr;
+
+ ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+ odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val);
+ if (odr < 0)
+ return odr;
+
+ sensor->ext_info.slv_odr = val;
+ sensor->odr = odr;
+ }
break;
}
default:
const struct st_lsm6dsx_ext_dev_settings *info,
u8 i2c_addr, const char *name)
{
+ enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC;
struct iio_chan_spec *ext_channels;
struct st_lsm6dsx_sensor *sensor;
struct iio_dev *iio_dev;
sensor = iio_priv(iio_dev);
sensor->id = id;
sensor->hw = hw;
- sensor->odr = info->odr_table.odr_avl[0].milli_hz;
+ sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
+ sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
sensor->gain = info->fs_table.fs_avl[0].gain;
sensor->ext_info.settings = info;
sensor->ext_info.addr = i2c_addr;
return -EINVAL;
integer = ch;
} else {
- ret = iio_str_to_fixpoint(buf, fract_mult, &integer, &fract);
+ ret = __iio_str_to_fixpoint(buf, fract_mult, &integer, &fract,
+ scale_db);
if (ret)
return ret;
}
- ret = __iio_str_to_fixpoint(buf, fract_mult, &integer, &fract,
- scale_db);
- if (ret)
- return ret;
ret = indio_dev->info->write_raw(indio_dev, this_attr->c,
integer, fract, this_attr->address);
ret = xa_alloc_cyclic_irq(&cm.local_id_table, &id, NULL, xa_limit_32b,
&cm.local_id_next, GFP_KERNEL);
- if (ret)
+ if (ret < 0)
goto error;
cm_id_priv->id.local_id = (__force __be32)id ^ cm.random_id_operand;
static void cm_format_rej(struct cm_rej_msg *rej_msg,
struct cm_id_private *cm_id_priv,
- enum ib_cm_rej_reason reason,
- void *ari,
- u8 ari_length,
- const void *private_data,
- u8 private_data_len)
+ enum ib_cm_rej_reason reason, void *ari,
+ u8 ari_length, const void *private_data,
+ u8 private_data_len, enum ib_cm_state state)
{
lockdep_assert_held(&cm_id_priv->lock);
IBA_SET(CM_REJ_REMOTE_COMM_ID, rej_msg,
be32_to_cpu(cm_id_priv->id.remote_id));
- switch(cm_id_priv->id.state) {
+ switch (state) {
case IB_CM_REQ_RCVD:
IBA_SET(CM_REJ_LOCAL_COMM_ID, rej_msg, be32_to_cpu(0));
IBA_SET(CM_REJ_MESSAGE_REJECTED, rej_msg, CM_MSG_RESPONSE_REQ);
cm_id_priv->private_data_len);
break;
case IB_CM_TIMEWAIT:
- cm_format_rej((struct cm_rej_msg *) msg->mad, cm_id_priv,
- IB_CM_REJ_STALE_CONN, NULL, 0, NULL, 0);
+ cm_format_rej((struct cm_rej_msg *)msg->mad, cm_id_priv,
+ IB_CM_REJ_STALE_CONN, NULL, 0, NULL, 0,
+ IB_CM_TIMEWAIT);
break;
default:
goto unlock;
u8 ari_length, const void *private_data,
u8 private_data_len)
{
+ enum ib_cm_state state = cm_id_priv->id.state;
struct ib_mad_send_buf *msg;
int ret;
(ari && ari_length > IB_CM_REJ_ARI_LENGTH))
return -EINVAL;
- switch (cm_id_priv->id.state) {
+ switch (state) {
case IB_CM_REQ_SENT:
case IB_CM_MRA_REQ_RCVD:
case IB_CM_REQ_RCVD:
if (ret)
return ret;
cm_format_rej((struct cm_rej_msg *)msg->mad, cm_id_priv, reason,
- ari, ari_length, private_data, private_data_len);
+ ari, ari_length, private_data, private_data_len,
+ state);
break;
case IB_CM_REP_SENT:
case IB_CM_MRA_REP_RCVD:
if (ret)
return ret;
cm_format_rej((struct cm_rej_msg *)msg->mad, cm_id_priv, reason,
- ari, ari_length, private_data, private_data_len);
+ ari, ari_length, private_data, private_data_len,
+ state);
break;
default:
pr_debug("%s: local_id %d, cm_id->state: %d\n", __func__,
* uverbs_uobject_fd_release(), and the caller is expected to ensure
* that release is never done while a call to lookup is possible.
*/
- if (f->f_op != fd_type->fops) {
+ if (f->f_op != fd_type->fops || uobject->ufile != ufile) {
fput(f);
return ERR_PTR(-EBADF);
}
filp = anon_inode_getfile(fd_type->name, fd_type->fops, NULL,
fd_type->flags);
if (IS_ERR(filp)) {
+ uverbs_uobject_put(uobj);
uobj = ERR_CAST(filp);
- goto err_uobj;
+ goto err_fd;
}
uobj->object = filp;
uobj->id = new_fd;
return uobj;
-err_uobj:
- uverbs_uobject_put(uobj);
err_fd:
put_unused_fd(new_fd);
return uobj;
enum rdma_lookup_mode mode)
{
assert_uverbs_usecnt(uobj, mode);
- uobj->uapi_object->type_class->lookup_put(uobj, mode);
/*
* In order to unlock an object, either decrease its usecnt for
* read access or zero it in case of exclusive access. See
break;
}
+ uobj->uapi_object->type_class->lookup_put(uobj, mode);
/* Pairs with the kref obtained by type->lookup_get */
uverbs_uobject_put(uobj);
}
ret = mmget_not_zero(mm);
if (!ret) {
list_del_init(&priv->list);
+ if (priv->entry) {
+ rdma_user_mmap_entry_put(priv->entry);
+ priv->entry = NULL;
+ }
mm = NULL;
continue;
}
u64 header;
wqe = i40iw_sc_cqp_get_next_send_wqe(cqp, scratch);
- if (wqe)
+ if (!wqe)
return I40IW_ERR_RING_FULL;
set_64bit_val(wqe, 32, feat_mem->pa);
int i;
for (i = 0; i < ARRAY_SIZE(pdefault_rules->rules_create_list); i++) {
+ union ib_flow_spec ib_spec = {};
int ret;
- union ib_flow_spec ib_spec;
+
switch (pdefault_rules->rules_create_list[i]) {
case 0:
/* no rule */
rdma_ah_set_path_bits(ah_attr, path->grh_mlid & 0x7f);
rdma_ah_set_static_rate(ah_attr,
path->static_rate ? path->static_rate - 5 : 0);
- if (path->grh_mlid & (1 << 7)) {
+
+ if (path->grh_mlid & (1 << 7) ||
+ ah_attr->type == RDMA_AH_ATTR_TYPE_ROCE) {
u32 tc_fl = be32_to_cpu(path->tclass_flowlabel);
rdma_ah_set_grh(ah_attr, NULL,
*/
if (udata && udata->outlen >= sizeof(__u64)) {
cq->ip = rvt_create_mmap_info(rdi, sz, udata, u_wc);
- if (!cq->ip) {
- err = -ENOMEM;
+ if (IS_ERR(cq->ip)) {
+ err = PTR_ERR(cq->ip);
goto bail_wc;
}
* @udata: user data (must be valid!)
* @obj: opaque pointer to a cq, wq etc
*
- * Return: rvt_mmap struct on success
+ * Return: rvt_mmap struct on success, ERR_PTR on failure
*/
struct rvt_mmap_info *rvt_create_mmap_info(struct rvt_dev_info *rdi, u32 size,
struct ib_udata *udata, void *obj)
ip = kmalloc_node(sizeof(*ip), GFP_KERNEL, rdi->dparms.node);
if (!ip)
- return ip;
+ return ERR_PTR(-ENOMEM);
size = PAGE_ALIGN(size);
qp->ip = rvt_create_mmap_info(rdi, s, udata,
qp->r_rq.wq);
- if (!qp->ip) {
- ret = ERR_PTR(-ENOMEM);
+ if (IS_ERR(qp->ip)) {
+ ret = ERR_CAST(qp->ip);
goto bail_qpn;
}
u32 s = sizeof(struct rvt_rwq) + srq->rq.size * sz;
srq->ip = rvt_create_mmap_info(dev, s, udata, srq->rq.wq);
- if (!srq->ip) {
- ret = -ENOMEM;
+ if (IS_ERR(srq->ip)) {
+ ret = PTR_ERR(srq->ip);
goto bail_wq;
}
{
struct ib_mr *base_mr = (struct ib_mr *)(uintptr_t)sqe->base_mr;
struct siw_device *sdev = to_siw_dev(pd->device);
- struct siw_mem *mem = siw_mem_id2obj(sdev, sqe->rkey >> 8);
+ struct siw_mem *mem;
int rv = 0;
siw_dbg_pd(pd, "STag 0x%08x\n", sqe->rkey);
- if (unlikely(!mem || !base_mr)) {
+ if (unlikely(!base_mr)) {
pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);
return -EINVAL;
}
+
if (unlikely(base_mr->rkey >> 8 != sqe->rkey >> 8)) {
pr_warn("siw: fastreg: STag 0x%08x: bad MR\n", sqe->rkey);
- rv = -EINVAL;
- goto out;
+ return -EINVAL;
}
+
+ mem = siw_mem_id2obj(sdev, sqe->rkey >> 8);
+ if (unlikely(!mem)) {
+ pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);
+ return -EINVAL;
+ }
+
if (unlikely(mem->pd != pd)) {
pr_warn("siw: fastreg: PD mismatch\n");
rv = -EINVAL;
if (!cmd)
return;
+ memset(cmd, 0, sizeof(*cmd));
+
if (vote_x == 0 && vote_y == 0)
valid = false;
* Set the wait for completion flag on command that need to be completed
* before the next command.
*/
- if (commit)
- cmd->wait = true;
+ cmd->wait = commit;
}
static void tcs_list_gen(struct list_head *bcm_list, int bucket,
.map = bcm7038_l1_map,
};
-int __init bcm7038_l1_of_init(struct device_node *dn,
+static int __init bcm7038_l1_of_init(struct device_node *dn,
struct device_node *parent)
{
struct bcm7038_l1_chip *intc;
#include <linux/dma-iommu.h>
#include <linux/efi.h>
#include <linux/interrupt.h>
+#include <linux/iopoll.h>
#include <linux/irqdomain.h>
#include <linux/list.h>
#include <linux/log2.h>
return IRQ_SET_MASK_OK_DONE;
}
+static void its_wait_vpt_parse_complete(void)
+{
+ void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
+ u64 val;
+
+ if (!gic_rdists->has_vpend_valid_dirty)
+ return;
+
+ WARN_ON_ONCE(readq_relaxed_poll_timeout(vlpi_base + GICR_VPENDBASER,
+ val,
+ !(val & GICR_VPENDBASER_Dirty),
+ 10, 500));
+}
+
static void its_vpe_schedule(struct its_vpe *vpe)
{
void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
val |= vpe->idai ? GICR_VPENDBASER_IDAI : 0;
val |= GICR_VPENDBASER_Valid;
gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+ its_wait_vpt_parse_complete();
}
static void its_vpe_deschedule(struct its_vpe *vpe)
val |= FIELD_PREP(GICR_VPENDBASER_4_1_VPEID, vpe->vpe_id);
gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+ its_wait_vpt_parse_complete();
}
static void its_vpe_4_1_deschedule(struct its_vpe *vpe,
* not on the host (since they can only be targetting a vPE).
* Tell the kernel we've done whatever it asked for.
*/
+ irq_data_update_effective_affinity(d, mask_val);
return IRQ_SET_MASK_OK;
}
gic_data.rdists.has_rvpeid &= !!(typer & GICR_TYPER_RVPEID);
gic_data.rdists.has_direct_lpi &= (!!(typer & GICR_TYPER_DirectLPIS) |
gic_data.rdists.has_rvpeid);
+ gic_data.rdists.has_vpend_valid_dirty &= !!(typer & GICR_TYPER_DIRTY);
/* Detect non-sensical configurations */
if (WARN_ON_ONCE(gic_data.rdists.has_rvpeid && !gic_data.rdists.has_vlpis)) {
if (WARN_ON(gic_data.ppi_nr == UINT_MAX))
gic_data.ppi_nr = 0;
pr_info("%d PPIs implemented\n", gic_data.ppi_nr);
- pr_info("%sVLPI support, %sdirect LPI support, %sRVPEID support\n",
- !gic_data.rdists.has_vlpis ? "no " : "",
- !gic_data.rdists.has_direct_lpi ? "no " : "",
- !gic_data.rdists.has_rvpeid ? "no " : "");
+ if (gic_data.rdists.has_vlpis)
+ pr_info("GICv4 features: %s%s%s\n",
+ gic_data.rdists.has_direct_lpi ? "DirectLPI " : "",
+ gic_data.rdists.has_rvpeid ? "RVPEID " : "",
+ gic_data.rdists.has_vpend_valid_dirty ? "Valid+Dirty " : "");
}
/* Check whether it's single security state view */
gic_data.rdists.has_rvpeid = true;
gic_data.rdists.has_vlpis = true;
gic_data.rdists.has_direct_lpi = true;
+ gic_data.rdists.has_vpend_valid_dirty = true;
if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) {
err = -ENOMEM;
return 0;
}
+static void mbigen_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
+{
+ platform_msi_domain_free(domain, virq, nr_irqs);
+}
+
static const struct irq_domain_ops mbigen_domain_ops = {
.translate = mbigen_domain_translate,
.alloc = mbigen_irq_domain_alloc,
- .free = irq_domain_free_irqs_common,
+ .free = mbigen_irq_domain_free,
};
static int mbigen_of_create_domain(struct platform_device *pdev,
static void meson_gpio_irq_update_bits(struct meson_gpio_irq_controller *ctl,
unsigned int reg, u32 mask, u32 val)
{
+ unsigned long flags;
u32 tmp;
+ spin_lock_irqsave(&ctl->lock, flags);
+
tmp = readl_relaxed(ctl->base + reg);
tmp &= ~mask;
tmp |= val;
writel_relaxed(tmp, ctl->base + reg);
+
+ spin_unlock_irqrestore(&ctl->lock, flags);
}
static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl)
unsigned long hwirq,
u32 **channel_hwirq)
{
+ unsigned long flags;
unsigned int idx;
- spin_lock(&ctl->lock);
+ spin_lock_irqsave(&ctl->lock, flags);
/* Find a free channel */
idx = find_first_zero_bit(ctl->channel_map, NUM_CHANNEL);
if (idx >= NUM_CHANNEL) {
- spin_unlock(&ctl->lock);
+ spin_unlock_irqrestore(&ctl->lock, flags);
pr_err("No channel available\n");
return -ENOSPC;
}
/* Mark the channel as used */
set_bit(idx, ctl->channel_map);
+ spin_unlock_irqrestore(&ctl->lock, flags);
+
/*
* Setup the mux of the channel to route the signal of the pad
* to the appropriate input of the GIC
*/
*channel_hwirq = &(ctl->channel_irqs[idx]);
- spin_unlock(&ctl->lock);
-
pr_debug("hwirq %lu assigned to channel %d - irq %u\n",
hwirq, idx, **channel_hwirq);
val |= REG_EDGE_POL_LOW(params, idx);
}
- spin_lock(&ctl->lock);
-
meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
REG_EDGE_POL_MASK(params, idx), val);
- spin_unlock(&ctl->lock);
-
return 0;
}
unsigned int type;
};
-DEFINE_STATIC_KEY_FALSE(legacy_bindings);
+static DEFINE_STATIC_KEY_FALSE(legacy_bindings);
static void mvebu_icu_init(struct mvebu_icu *icu,
struct mvebu_icu_msi_data *msi_data,
#define CONTEXT_THRESHOLD 0x00
#define CONTEXT_CLAIM 0x04
-#define PLIC_DISABLE_THRESHOLD 0xf
+#define PLIC_DISABLE_THRESHOLD 0x7
#define PLIC_ENABLE_THRESHOLD 0
struct plic_priv {
#define VINT_ENABLE_SET_OFFSET 0x0
#define VINT_ENABLE_CLR_OFFSET 0x8
#define VINT_STATUS_OFFSET 0x18
+#define VINT_STATUS_MASKED_OFFSET 0x20
/**
* struct ti_sci_inta_event_desc - Description of an event coming to
chained_irq_enter(irq_desc_get_chip(desc), desc);
val = readq_relaxed(inta->base + vint_desc->vint_id * 0x1000 +
- VINT_STATUS_OFFSET);
+ VINT_STATUS_MASKED_OFFSET);
for_each_set_bit(bit, &val, MAX_EVENTS_PER_VINT) {
virq = irq_find_mapping(domain, vint_desc->events[bit].hwirq);
}
}
-const char *dmril[] = {"NO SPEED", "1200/75", "NODEF2", "75/1200", "NODEF4",
+static const char *dmril[] = {"NO SPEED", "1200/75", "NODEF2", "75/1200", "NODEF4",
"300", "600", "1200", "2400", "4800", "7200",
"9600nt", "9600t", "12000", "14400", "WRONG"};
-const char *dmrim[] = {"NO MOD", "NO DEF", "V32/V32b", "V22", "V21",
+static const char *dmrim[] = {"NO MOD", "NO DEF", "V32/V32b", "V22", "V21",
"Bell103", "V23", "Bell202", "V17", "V29", "V27ter"};
static void
/* Do we need to select a new pgpath? */
pgpath = READ_ONCE(m->current_pgpath);
- queue_io = test_bit(MPATHF_QUEUE_IO, &m->flags);
- if (!pgpath || !queue_io)
+ if (!pgpath || !test_bit(MPATHF_QUEUE_IO, &m->flags))
pgpath = choose_pgpath(m, bio->bi_iter.bi_size);
+ /* MPATHF_QUEUE_IO might have been cleared by choose_pgpath. */
+ queue_io = test_bit(MPATHF_QUEUE_IO, &m->flags);
+
if ((pgpath && queue_io) ||
(!pgpath && test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))) {
/* Queue for the daemon to resubmit */
fio->level++;
if (type == DM_VERITY_BLOCK_TYPE_METADATA)
- block += v->data_blocks;
+ block = block - v->hash_start + v->data_blocks;
/*
* For RS(M, N), the continuous FEC data is divided into blocks of N
return 0;
}
+static int writecache_read_metadata(struct dm_writecache *wc, sector_t n_sectors)
+{
+ struct dm_io_region region;
+ struct dm_io_request req;
+
+ region.bdev = wc->ssd_dev->bdev;
+ region.sector = wc->start_sector;
+ region.count = n_sectors;
+ req.bi_op = REQ_OP_READ;
+ req.bi_op_flags = REQ_SYNC;
+ req.mem.type = DM_IO_VMA;
+ req.mem.ptr.vma = (char *)wc->memory_map;
+ req.client = wc->dm_io;
+ req.notify.fn = NULL;
+
+ return dm_io(&req, 1, ®ion, NULL);
+}
+
static void writecache_resume(struct dm_target *ti)
{
struct dm_writecache *wc = ti->private;
wc_lock(wc);
- if (WC_MODE_PMEM(wc))
+ if (WC_MODE_PMEM(wc)) {
persistent_memory_invalidate_cache(wc->memory_map, wc->memory_map_size);
+ } else {
+ r = writecache_read_metadata(wc, wc->metadata_sectors);
+ if (r) {
+ size_t sb_entries_offset;
+ writecache_error(wc, r, "unable to read metadata: %d", r);
+ sb_entries_offset = offsetof(struct wc_memory_superblock, entries);
+ memset((char *)wc->memory_map + sb_entries_offset, -1,
+ (wc->metadata_sectors << SECTOR_SHIFT) - sb_entries_offset);
+ }
+ }
wc->tree = RB_ROOT;
INIT_LIST_HEAD(&wc->lru);
ti->error = "Invalid block size";
goto bad;
}
+ if (wc->block_size < bdev_logical_block_size(wc->dev->bdev) ||
+ wc->block_size < bdev_logical_block_size(wc->ssd_dev->bdev)) {
+ r = -EINVAL;
+ ti->error = "Block size is smaller than device logical block size";
+ goto bad;
+ }
wc->block_size_bits = __ffs(wc->block_size);
wc->max_writeback_jobs = MAX_WRITEBACK_JOBS;
goto bad;
}
} else {
- struct dm_io_region region;
- struct dm_io_request req;
size_t n_blocks, n_metadata_blocks;
uint64_t n_bitmap_bits;
goto bad;
}
- region.bdev = wc->ssd_dev->bdev;
- region.sector = wc->start_sector;
- region.count = wc->metadata_sectors;
- req.bi_op = REQ_OP_READ;
- req.bi_op_flags = REQ_SYNC;
- req.mem.type = DM_IO_VMA;
- req.mem.ptr.vma = (char *)wc->memory_map;
- req.client = wc->dm_io;
- req.notify.fn = NULL;
-
- r = dm_io(&req, 1, ®ion, NULL);
+ r = writecache_read_metadata(wc, wc->block_size >> SECTOR_SHIFT);
if (r) {
- ti->error = "Unable to read metadata";
+ ti->error = "Unable to read first block of metadata";
goto bad;
}
}
}
hw = to_me_hw(dev);
hw->mem_addr = pcim_iomap_table(pdev)[0];
- hw->irq = pdev->irq;
hw->read_fws = mei_me_read_fws;
pci_enable_msi(pdev);
+ hw->irq = pdev->irq;
+
/* request and enable interrupt */
irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED;
config VOP
tristate "VOP Driver"
- depends on VOP_BUS
+ depends on VOP_BUS && VHOST_DPN
select VHOST_RING
select VIRTIO
help
* Issued High Priority Interrupt, and check for card status
* until out-of prg-state.
*/
-int mmc_interrupt_hpi(struct mmc_card *card)
+static int mmc_interrupt_hpi(struct mmc_card *card)
{
int err;
u32 status;
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
/* CQHCI is idle and should halt immediately, so set a small timeout */
#define CQHCI_OFF_TIMEOUT 100
+static u32 cqhci_read_ctl(struct cqhci_host *cq_host)
+{
+ return cqhci_readl(cq_host, CQHCI_CTL);
+}
+
static void cqhci_off(struct mmc_host *mmc)
{
struct cqhci_host *cq_host = mmc->cqe_private;
- ktime_t timeout;
- bool timed_out;
u32 reg;
+ int err;
if (!cq_host->enabled || !mmc->cqe_on || cq_host->recovery_halt)
return;
cqhci_writel(cq_host, CQHCI_HALT, CQHCI_CTL);
- timeout = ktime_add_us(ktime_get(), CQHCI_OFF_TIMEOUT);
- while (1) {
- timed_out = ktime_compare(ktime_get(), timeout) > 0;
- reg = cqhci_readl(cq_host, CQHCI_CTL);
- if ((reg & CQHCI_HALT) || timed_out)
- break;
- }
-
- if (timed_out)
+ err = readx_poll_timeout(cqhci_read_ctl, cq_host, reg,
+ reg & CQHCI_HALT, 0, CQHCI_OFF_TIMEOUT);
+ if (err < 0)
pr_err("%s: cqhci: CQE stuck on\n", mmc_hostname(mmc));
else
pr_debug("%s: cqhci: CQE off\n", mmc_hostname(mmc));
meson_mx_mmc_start_cmd(mmc, mrq->cmd);
}
-static int meson_mx_mmc_card_busy(struct mmc_host *mmc)
-{
- struct meson_mx_mmc_host *host = mmc_priv(mmc);
- u32 irqc = readl(host->base + MESON_MX_SDIO_IRQC);
-
- return !!(irqc & MESON_MX_SDIO_IRQC_FORCE_DATA_DAT_MASK);
-}
-
static void meson_mx_mmc_read_response(struct mmc_host *mmc,
struct mmc_command *cmd)
{
static struct mmc_host_ops meson_mx_mmc_ops = {
.request = meson_mx_mmc_request,
.set_ios = meson_mx_mmc_set_ios,
- .card_busy = meson_mx_mmc_card_busy,
.get_cd = mmc_gpio_get_cd,
.get_ro = mmc_gpio_get_ro,
};
mmc->f_max = clk_round_rate(host->cfg_div_clk,
clk_get_rate(host->parent_clk));
- mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
+ mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY;
mmc->ops = &meson_mx_mmc_ops;
ret = mmc_of_parse(mmc);
goto clk_disable;
}
+ msm_host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_NEED_RSP_BUSY;
+
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
struct sdhci_pci_slot *slot = sdhci_priv(host);
struct intel_host *intel_host = sdhci_pci_priv(slot);
+ if (!(mmc_driver_type_mask(intel_host->drv_strength) & card_drv))
+ return 0;
+
return intel_host->drv_strength;
}
{
/* Wait for 5ms after set 1.8V signal enable bit */
usleep_range(5000, 5500);
+
+ /*
+ * For some reason the controller's Host Control2 register reports
+ * the bit representing 1.8V signaling as 0 when read after it was
+ * written as 1. Subsequent read reports 1.
+ *
+ * Since this may cause some issues, do an empty read of the Host
+ * Control2 register here to circumvent this.
+ */
+ sdhci_readw(host, SDHCI_HOST_CONTROL2);
}
static const struct sdhci_ops sdhci_xenon_ops = {
spi-nor-objs += xilinx.o
spi-nor-objs += xmc.o
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
+
+obj-$(CONFIG_MTD_SPI_NOR) += controllers/
config CAIF_VIRTIO
tristate "CAIF virtio transport driver"
- depends on CAIF && HAS_DMA
+ depends on CAIF && HAS_DMA && VHOST_DPN
select VHOST_RING
select VIRTIO
select GENERIC_ALLOCATOR
reg |= ARLTBL_RW;
else
reg &= ~ARLTBL_RW;
+ if (dev->vlan_enabled)
+ reg &= ~ARLTBL_IVL_SVL_SELECT;
+ else
+ reg |= ARLTBL_IVL_SVL_SELECT;
b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
return b53_arl_op_wait(dev);
u16 vid, struct b53_arl_entry *ent, u8 *idx,
bool is_valid)
{
+ DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
unsigned int i;
int ret;
if (ret)
return ret;
+ bitmap_zero(free_bins, dev->num_arl_entries);
+
/* Read the bins */
for (i = 0; i < dev->num_arl_entries; i++) {
u64 mac_vid;
B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
b53_arl_to_entry(ent, mac_vid, fwd_entry);
- if (!(fwd_entry & ARLTBL_VALID))
+ if (!(fwd_entry & ARLTBL_VALID)) {
+ set_bit(i, free_bins);
continue;
+ }
if ((mac_vid & ARLTBL_MAC_MASK) != mac)
continue;
+ if (dev->vlan_enabled &&
+ ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
+ continue;
*idx = i;
+ return 0;
}
+ if (bitmap_weight(free_bins, dev->num_arl_entries) == 0)
+ return -ENOSPC;
+
+ *idx = find_first_bit(free_bins, dev->num_arl_entries);
+
return -ENOENT;
}
if (op)
return ret;
- /* We could not find a matching MAC, so reset to a new entry */
- if (ret) {
+ switch (ret) {
+ case -ENOSPC:
+ dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
+ addr, vid);
+ return is_valid ? ret : 0;
+ case -ENOENT:
+ /* We could not find a matching MAC, so reset to a new entry */
+ dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
+ addr, vid, idx);
fwd_entry = 0;
- idx = 1;
+ break;
+ default:
+ dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
+ addr, vid, idx);
+ break;
}
/* For multicast address, the port is a bitmask and the validity
ent.is_valid = !!(ent.port);
}
- ent.is_valid = is_valid;
ent.vid = vid;
ent.is_static = true;
ent.is_age = false;
/* ARL Table Read/Write Register (8 bit) */
#define B53_ARLTBL_RW_CTRL 0x00
#define ARLTBL_RW BIT(0)
+#define ARLTBL_IVL_SVL_SELECT BIT(6)
#define ARLTBL_START_DONE BIT(7)
/* MAC Address Index Register (48 bit) */
*
* BCM5325 and BCM5365 share most definitions below
*/
-#define B53_ARLTBL_MAC_VID_ENTRY(n) (0x10 * (n))
+#define B53_ARLTBL_MAC_VID_ENTRY(n) ((0x10 * (n)) + 0x10)
#define ARLTBL_MAC_MASK 0xffffffffffffULL
#define ARLTBL_VID_S 48
#define ARLTBL_VID_MASK_25 0xff
#define ARLTBL_VALID_25 BIT(63)
/* ARL Table Data Entry N Registers (32 bit) */
-#define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x08)
+#define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x18)
#define ARLTBL_DATA_PORT_ID_MASK 0x1ff
#define ARLTBL_TC(tc) ((3 & tc) << 11)
#define ARLTBL_AGE BIT(14)
#define ARLTBL_STATIC BIT(15)
#define ARLTBL_VALID BIT(16)
+/* Maximum number of bin entries in the ARL for all switches */
+#define B53_ARLTBL_MAX_BIN_ENTRIES 4
+
/* ARL Search Control Register (8 bit) */
#define B53_ARL_SRCH_CTL 0x50
#define B53_ARL_SRCH_CTL_25 0x20
};
static int
-mt7623_trgmii_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- int ret;
-
- ret = regmap_write(priv->ethernet, TRGMII_BASE(reg), val);
- if (ret < 0)
- dev_err(priv->dev,
- "failed to priv write register\n");
- return ret;
-}
-
-static u32
-mt7623_trgmii_read(struct mt7530_priv *priv, u32 reg)
-{
- int ret;
- u32 val;
-
- ret = regmap_read(priv->ethernet, TRGMII_BASE(reg), &val);
- if (ret < 0) {
- dev_err(priv->dev,
- "failed to priv read register\n");
- return ret;
- }
-
- return val;
-}
-
-static void
-mt7623_trgmii_rmw(struct mt7530_priv *priv, u32 reg,
- u32 mask, u32 set)
-{
- u32 val;
-
- val = mt7623_trgmii_read(priv, reg);
- val &= ~mask;
- val |= set;
- mt7623_trgmii_write(priv, reg, val);
-}
-
-static void
-mt7623_trgmii_set(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- mt7623_trgmii_rmw(priv, reg, 0, val);
-}
-
-static void
-mt7623_trgmii_clear(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- mt7623_trgmii_rmw(priv, reg, val, 0);
-}
-
-static int
core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
{
struct mii_bus *bus = priv->bus;
for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
mt7530_rmw(priv, MT7530_TRGMII_RD(i),
RD_TAP_MASK, RD_TAP(16));
- else
- if (priv->id != ID_MT7621)
- mt7623_trgmii_set(priv, GSW_INTF_MODE,
- INTF_MODE_TRGMII);
-
- return 0;
-}
-
-static int
-mt7623_pad_clk_setup(struct dsa_switch *ds)
-{
- struct mt7530_priv *priv = ds->priv;
- int i;
-
- for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
- mt7623_trgmii_write(priv, GSW_TRGMII_TD_ODT(i),
- TD_DM_DRVP(8) | TD_DM_DRVN(8));
-
- mt7623_trgmii_set(priv, GSW_TRGMII_RCK_CTRL, RX_RST | RXC_DQSISEL);
- mt7623_trgmii_clear(priv, GSW_TRGMII_RCK_CTRL, RX_RST);
-
return 0;
}
*/
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
MT7530_PORT_MATRIX_MODE);
- mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
- VLAN_ATTR(MT7530_VLAN_TRANSPARENT));
+ mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
+ VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
for (i = 0; i < MT7530_NUM_PORTS; i++) {
if (dsa_is_user_port(ds, i) &&
if (all_user_ports_removed) {
mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT),
PCR_MATRIX(dsa_user_ports(priv->ds)));
- mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT),
- PORT_SPEC_TAG);
+ mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), PORT_SPEC_TAG
+ | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
}
/* Set the port as a user port which is to be able to recognize VID
* from incoming packets before fetching entry within the VLAN table.
*/
- mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
- VLAN_ATTR(MT7530_VLAN_USER));
+ mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
+ VLAN_ATTR(MT7530_VLAN_USER) |
+ PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
}
static void
dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent;
if (priv->id == ID_MT7530) {
- priv->ethernet = syscon_node_to_regmap(dn);
- if (IS_ERR(priv->ethernet))
- return PTR_ERR(priv->ethernet);
-
regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
ret = regulator_enable(priv->core_pwr);
if (ret < 0) {
mt7530_cpu_port_enable(priv, i);
else
mt7530_port_disable(ds, i);
+
+ /* Enable consistent egress tag */
+ mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
/* Setup port 5 */
/* Setup TX circuit incluing relevant PAD and driving */
mt7530_pad_clk_setup(ds, state->interface);
- if (priv->id == ID_MT7530) {
- /* Setup RX circuit, relevant PAD and driving on the
- * host which must be placed after the setup on the
- * device side is all finished.
- */
- mt7623_pad_clk_setup(ds);
- }
-
priv->p6_interface = state->interface;
break;
default:
/* Register for port vlan control */
#define MT7530_PVC_P(x) (0x2010 + ((x) * 0x100))
#define PORT_SPEC_TAG BIT(5)
+#define PVC_EG_TAG(x) (((x) & 0x7) << 8)
+#define PVC_EG_TAG_MASK PVC_EG_TAG(7)
#define VLAN_ATTR(x) (((x) & 0x3) << 6)
#define VLAN_ATTR_MASK VLAN_ATTR(3)
+enum mt7530_vlan_port_eg_tag {
+ MT7530_VLAN_EG_DISABLED = 0,
+ MT7530_VLAN_EG_CONSISTENT = 1,
+};
+
enum mt7530_vlan_port_attr {
MT7530_VLAN_USER = 0,
MT7530_VLAN_TRANSPARENT = 3,
/* Registers for TRGMII on the both side */
#define MT7530_TRGMII_RCK_CTRL 0x7a00
-#define GSW_TRGMII_RCK_CTRL 0x300
#define RX_RST BIT(31)
#define RXC_DQSISEL BIT(30)
#define DQSI1_TAP_MASK (0x7f << 8)
#define DQSI0_TAP(x) ((x) & 0x7f)
#define MT7530_TRGMII_RCK_RTT 0x7a04
-#define GSW_TRGMII_RCK_RTT 0x304
#define DQS1_GATE BIT(31)
#define DQS0_GATE BIT(30)
#define MT7530_TRGMII_RD(x) (0x7a10 + (x) * 8)
-#define GSW_TRGMII_RD(x) (0x310 + (x) * 8)
#define BSLIP_EN BIT(31)
#define EDGE_CHK BIT(30)
#define RD_TAP_MASK 0x7f
#define RD_TAP(x) ((x) & 0x7f)
-#define GSW_TRGMII_TXCTRL 0x340
#define MT7530_TRGMII_TXCTRL 0x7a40
#define TRAIN_TXEN BIT(31)
#define TXC_INV BIT(30)
#define TX_RST BIT(28)
#define MT7530_TRGMII_TD_ODT(i) (0x7a54 + 8 * (i))
-#define GSW_TRGMII_TD_ODT(i) (0x354 + 8 * (i))
#define TD_DM_DRVP(x) ((x) & 0xf)
#define TD_DM_DRVN(x) (((x) & 0xf) << 4)
-#define GSW_INTF_MODE 0x390
-#define INTF_MODE_TRGMII BIT(1)
-
#define MT7530_TRGMII_TCK_CTRL 0x7a78
#define TCK_TAP(x) (((x) & 0xf) << 8)
* @ds: The pointer to the dsa core structure
* @bus: The bus used for the device and built-in PHY
* @rstc: The pointer to reset control used by MCM
- * @ethernet: The regmap used for access TRGMII-based registers
* @core_pwr: The power supplied into the core
* @io_pwr: The power supplied into the I/O
* @reset: The descriptor for GPIO line tied to its reset pin
struct dsa_switch *ds;
struct mii_bus *bus;
struct reset_control *rstc;
- struct regmap *ethernet;
struct regulator *core_pwr;
struct regulator *io_pwr;
struct gpio_desc *reset;
ops = chip->info->ops;
mv88e6xxx_reg_lock(chip);
- if (!mv88e6xxx_port_ppu_updates(chip, port) && ops->port_set_link)
+ if ((!mv88e6xxx_port_ppu_updates(chip, port) ||
+ mode == MLO_AN_FIXED) && ops->port_set_link)
err = ops->port_set_link(chip, port, LINK_FORCED_DOWN);
mv88e6xxx_reg_unlock(chip);
ops = chip->info->ops;
mv88e6xxx_reg_lock(chip);
- if (!mv88e6xxx_port_ppu_updates(chip, port)) {
+ if (!mv88e6xxx_port_ppu_updates(chip, port) || mode == MLO_AN_FIXED) {
/* FIXME: for an automedia port, should we force the link
* down here - what if the link comes up due to "other" media
* while we're bringing the port up, how is the exclusivity
const unsigned char *addr, u16 vid)
{
struct ocelot *ocelot = ds->priv;
- bool vlan_aware;
- vlan_aware = dsa_port_is_vlan_filtering(dsa_to_port(ds, port));
-
- return ocelot_fdb_add(ocelot, port, addr, vid, vlan_aware);
+ return ocelot_fdb_add(ocelot, port, addr, vid);
}
static int felix_fdb_del(struct dsa_switch *ds, int port,
xgbe_disable_rx_tx_ints(pdata);
/* Turn on polling */
- __napi_schedule_irqoff(&pdata->napi);
+ __napi_schedule(&pdata->napi);
}
} else {
/* Don't clear Rx/Tx status if doing per channel DMA
dma_addr_t mapping;
/* Allocate a new SKB for a new packet */
- skb = netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH);
+ skb = __netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH,
+ GFP_ATOMIC | __GFP_NOWARN);
if (!skb) {
priv->mib.alloc_rx_buff_failed++;
netif_err(priv, rx_err, ndev, "SKB alloc failed\n");
priv->wol_irq = platform_get_irq(pdev, 1);
}
if (priv->irq0 <= 0 || (priv->irq1 <= 0 && !priv->is_lite)) {
- dev_err(&pdev->dev, "invalid interrupts\n");
ret = -EINVAL;
goto err_free_netdev;
}
{
struct device_node *np = pdev->dev.of_node;
struct bgmac *bgmac;
- struct resource *regs;
const u8 *mac_addr;
bgmac = bgmac_alloc(&pdev->dev);
if (bgmac->irq < 0)
return bgmac->irq;
- regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "amac_base");
- if (!regs) {
- dev_err(&pdev->dev, "Unable to obtain base resource\n");
- return -EINVAL;
- }
-
- bgmac->plat.base = devm_ioremap_resource(&pdev->dev, regs);
+ bgmac->plat.base =
+ devm_platform_ioremap_resource_byname(pdev, "amac_base");
if (IS_ERR(bgmac->plat.base))
return PTR_ERR(bgmac->plat.base);
- regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "idm_base");
- if (regs) {
- bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs);
- if (IS_ERR(bgmac->plat.idm_base))
- return PTR_ERR(bgmac->plat.idm_base);
- bgmac->feature_flags &= ~BGMAC_FEAT_IDM_MASK;
- }
+ bgmac->plat.idm_base =
+ devm_platform_ioremap_resource_byname(pdev, "idm_base");
+ if (IS_ERR(bgmac->plat.idm_base))
+ return PTR_ERR(bgmac->plat.idm_base);
+ bgmac->feature_flags &= ~BGMAC_FEAT_IDM_MASK;
- regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nicpm_base");
- if (regs) {
- bgmac->plat.nicpm_base = devm_ioremap_resource(&pdev->dev,
- regs);
- if (IS_ERR(bgmac->plat.nicpm_base))
- return PTR_ERR(bgmac->plat.nicpm_base);
- }
+ bgmac->plat.nicpm_base =
+ devm_platform_ioremap_resource_byname(pdev, "nicpm_base");
+ if (IS_ERR(bgmac->plat.nicpm_base))
+ return PTR_ERR(bgmac->plat.nicpm_base);
bgmac->read = platform_bgmac_read;
bgmac->write = platform_bgmac_write;
if (netif_running(dev))
bcmgenet_update_mib_counters(priv);
+ dev->netdev_ops->ndo_get_stats(dev);
+
for (i = 0; i < BCMGENET_STATS_LEN; i++) {
const struct bcmgenet_stats *s;
char *p;
dma_addr_t mapping;
/* Allocate a new Rx skb */
- skb = netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT);
+ skb = __netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT,
+ GFP_ATOMIC | __GFP_NOWARN);
if (!skb) {
priv->mib.alloc_rx_buff_failed++;
netif_err(priv, rx_err, priv->dev,
dev->stats.rx_packets = rx_packets;
dev->stats.rx_errors = rx_errors;
dev->stats.rx_missed_errors = rx_errors;
+ dev->stats.rx_dropped = rx_dropped;
return &dev->stats;
}
}
}
-static unsigned long cudbg_mem_region_size(struct cudbg_init *pdbg_init,
- struct cudbg_error *cudbg_err,
- u8 mem_type)
+static int cudbg_mem_region_size(struct cudbg_init *pdbg_init,
+ struct cudbg_error *cudbg_err,
+ u8 mem_type, unsigned long *region_size)
{
struct adapter *padap = pdbg_init->adap;
struct cudbg_meminfo mem_info;
memset(&mem_info, 0, sizeof(struct cudbg_meminfo));
rc = cudbg_fill_meminfo(padap, &mem_info);
- if (rc)
+ if (rc) {
+ cudbg_err->sys_err = rc;
return rc;
+ }
cudbg_t4_fwcache(pdbg_init, cudbg_err);
rc = cudbg_meminfo_get_mem_index(padap, &mem_info, mem_type, &mc_idx);
- if (rc)
+ if (rc) {
+ cudbg_err->sys_err = rc;
return rc;
+ }
+
+ if (region_size)
+ *region_size = mem_info.avail[mc_idx].limit -
+ mem_info.avail[mc_idx].base;
- return mem_info.avail[mc_idx].limit - mem_info.avail[mc_idx].base;
+ return 0;
}
static int cudbg_collect_mem_region(struct cudbg_init *pdbg_init,
struct cudbg_error *cudbg_err,
u8 mem_type)
{
- unsigned long size = cudbg_mem_region_size(pdbg_init, cudbg_err, mem_type);
+ unsigned long size = 0;
+ int rc;
+
+ rc = cudbg_mem_region_size(pdbg_init, cudbg_err, mem_type, &size);
+ if (rc)
+ return rc;
return cudbg_read_fw_mem(pdbg_init, dbg_buff, mem_type, size,
cudbg_err);
*/
static int cxgb4_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
{
- struct adapter *adapter = (struct adapter *)container_of(ptp,
- struct adapter, ptp_clock_info);
- struct fw_ptp_cmd c;
+ struct adapter *adapter = container_of(ptp, struct adapter,
+ ptp_clock_info);
u64 ns;
- int err;
-
- memset(&c, 0, sizeof(c));
- c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
- FW_CMD_REQUEST_F |
- FW_CMD_READ_F |
- FW_PTP_CMD_PORTID_V(0));
- c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
- c.u.ts.sc = FW_PTP_SC_GET_TIME;
- err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), &c);
- if (err < 0) {
- dev_err(adapter->pdev_dev,
- "PTP: %s error %d\n", __func__, -err);
- return err;
- }
+ ns = t4_read_reg(adapter, T5_PORT_REG(0, MAC_PORT_PTP_SUM_LO_A));
+ ns |= (u64)t4_read_reg(adapter,
+ T5_PORT_REG(0, MAC_PORT_PTP_SUM_HI_A)) << 32;
/* convert to timespec*/
- ns = be64_to_cpu(c.u.ts.tm);
*ts = ns_to_timespec64(ns);
-
- return err;
+ return 0;
}
/**
FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION));
ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
¶m, &val);
- if (ret < 0)
+ if (ret)
return ret;
*phy_fw_ver = val;
return 0;
#define MAC_PORT_CFG2_A 0x818
+#define MAC_PORT_PTP_SUM_LO_A 0x990
+#define MAC_PORT_PTP_SUM_HI_A 0x994
+
#define MPS_CMN_CTL_A 0x9000
#define COUNTPAUSEMCRX_S 5
#endif
};
-const struct pci_device_id early_486_chipsets[] = {
+static const struct pci_device_id early_486_chipsets[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
{ },
struct sk_buff *rx_skbuff[RX_RING_SIZE];
};
+struct fec_stop_mode_gpr {
+ struct regmap *gpr;
+ u8 reg;
+ u8 bit;
+};
+
/* The FEC buffer descriptors track the ring buffers. The rx_bd_base and
* tx_bd_base always point to the base of the buffer descriptors. The
* cur_rx and cur_tx point to the currently available buffer.
int hwts_tx_en;
struct delayed_work time_keep;
struct regulator *reg_phy;
+ struct fec_stop_mode_gpr stop_gpr;
unsigned int tx_align;
unsigned int rx_align;
#include <linux/if_vlan.h>
#include <linux/pinctrl/consumer.h>
#include <linux/prefetch.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <soc/imx/cpuidle.h>
#include <asm/cacheflush.h>
#define FEC_ENET_OPD_V 0xFFF0
#define FEC_MDIO_PM_TIMEOUT 100 /* ms */
+struct fec_devinfo {
+ u32 quirks;
+ u8 stop_gpr_reg;
+ u8 stop_gpr_bit;
+};
+
+static const struct fec_devinfo fec_imx25_info = {
+ .quirks = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR |
+ FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx27_info = {
+ .quirks = FEC_QUIRK_MIB_CLEAR | FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx28_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
+ FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
+ FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx6q_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+ FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+ FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
+ FEC_QUIRK_HAS_RACC,
+ .stop_gpr_reg = 0x34,
+ .stop_gpr_bit = 27,
+};
+
+static const struct fec_devinfo fec_mvf600_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC,
+};
+
+static const struct fec_devinfo fec_imx6x_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+ FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+ FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
+ FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
+ FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+};
+
+static const struct fec_devinfo fec_imx6ul_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+ FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+ FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
+ FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
+ FEC_QUIRK_HAS_COALESCE,
+};
+
static struct platform_device_id fec_devtype[] = {
{
/* keep it for coldfire */
.driver_data = 0,
}, {
.name = "imx25-fec",
- .driver_data = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR |
- FEC_QUIRK_HAS_FRREG,
+ .driver_data = (kernel_ulong_t)&fec_imx25_info,
}, {
.name = "imx27-fec",
- .driver_data = FEC_QUIRK_MIB_CLEAR | FEC_QUIRK_HAS_FRREG,
+ .driver_data = (kernel_ulong_t)&fec_imx27_info,
}, {
.name = "imx28-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
- FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
- FEC_QUIRK_HAS_FRREG,
+ .driver_data = (kernel_ulong_t)&fec_imx28_info,
}, {
.name = "imx6q-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
- FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
- FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
- FEC_QUIRK_HAS_RACC,
+ .driver_data = (kernel_ulong_t)&fec_imx6q_info,
}, {
.name = "mvf600-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC,
+ .driver_data = (kernel_ulong_t)&fec_mvf600_info,
}, {
.name = "imx6sx-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
- FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
- FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
- FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
- FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+ .driver_data = (kernel_ulong_t)&fec_imx6x_info,
}, {
.name = "imx6ul-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
- FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
- FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
- FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
- FEC_QUIRK_HAS_COALESCE,
+ .driver_data = (kernel_ulong_t)&fec_imx6ul_info,
}, {
/* sentinel */
}
}
+static void fec_enet_stop_mode(struct fec_enet_private *fep, bool enabled)
+{
+ struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
+ struct fec_stop_mode_gpr *stop_gpr = &fep->stop_gpr;
+
+ if (stop_gpr->gpr) {
+ if (enabled)
+ regmap_update_bits(stop_gpr->gpr, stop_gpr->reg,
+ BIT(stop_gpr->bit),
+ BIT(stop_gpr->bit));
+ else
+ regmap_update_bits(stop_gpr->gpr, stop_gpr->reg,
+ BIT(stop_gpr->bit), 0);
+ } else if (pdata && pdata->sleep_mode_enable) {
+ pdata->sleep_mode_enable(enabled);
+ }
+}
+
static void
fec_stop(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
- struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8);
u32 val;
val = readl(fep->hwp + FEC_ECNTRL);
val |= (FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
writel(val, fep->hwp + FEC_ECNTRL);
-
- if (pdata && pdata->sleep_mode_enable)
- pdata->sleep_mode_enable(true);
+ fec_enet_stop_mode(fep, true);
}
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
return irq_cnt;
}
+static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
+ struct fec_devinfo *dev_info,
+ struct device_node *np)
+{
+ struct device_node *gpr_np;
+ int ret = 0;
+
+ if (!dev_info)
+ return 0;
+
+ gpr_np = of_parse_phandle(np, "gpr", 0);
+ if (!gpr_np)
+ return 0;
+
+ fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);
+ if (IS_ERR(fep->stop_gpr.gpr)) {
+ dev_err(&fep->pdev->dev, "could not find gpr regmap\n");
+ ret = PTR_ERR(fep->stop_gpr.gpr);
+ fep->stop_gpr.gpr = NULL;
+ goto out;
+ }
+
+ fep->stop_gpr.reg = dev_info->stop_gpr_reg;
+ fep->stop_gpr.bit = dev_info->stop_gpr_bit;
+
+out:
+ of_node_put(gpr_np);
+
+ return ret;
+}
+
static int
fec_probe(struct platform_device *pdev)
{
int num_rx_qs;
char irq_name[8];
int irq_cnt;
+ struct fec_devinfo *dev_info;
fec_enet_get_queue_num(pdev, &num_tx_qs, &num_rx_qs);
of_id = of_match_device(fec_dt_ids, &pdev->dev);
if (of_id)
pdev->id_entry = of_id->data;
- fep->quirks = pdev->id_entry->driver_data;
+ dev_info = (struct fec_devinfo *)pdev->id_entry->driver_data;
+ if (dev_info)
+ fep->quirks = dev_info->quirks;
fep->netdev = ndev;
fep->num_rx_queues = num_rx_qs;
if (of_get_property(np, "fsl,magic-packet", NULL))
fep->wol_flag |= FEC_WOL_HAS_MAGIC_PACKET;
+ ret = fec_enet_init_stop_mode(fep, dev_info, np);
+ if (ret)
+ goto failed_stop_mode;
+
phy_node = of_parse_phandle(np, "phy-handle", 0);
if (!phy_node && of_phy_is_fixed_link(np)) {
ret = of_phy_register_fixed_link(np);
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
of_node_put(phy_node);
+failed_stop_mode:
failed_phy:
dev_id--;
failed_ioremap:
{
struct net_device *ndev = dev_get_drvdata(dev);
struct fec_enet_private *fep = netdev_priv(ndev);
- struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
int ret;
int val;
goto failed_clk;
}
if (fep->wol_flag & FEC_WOL_FLAG_ENABLE) {
- if (pdata && pdata->sleep_mode_enable)
- pdata->sleep_mode_enable(false);
+ fec_enet_stop_mode(fep, false);
+
val = readl(fep->hwp + FEC_ECNTRL);
val &= ~(FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
writel(val, fep->hwp + FEC_ECNTRL);
if (hw->mac_type == e1000_82545 ||
hw->mac_type == e1000_ce4100 ||
hw->mac_type == e1000_82546) {
- return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
+ return ((begin ^ (end - 1)) >> 16) == 0;
}
return true;
}
}
if (lut) {
- bool pf_lut = vsi->type == I40E_VSI_MAIN ? true : false;
+ bool pf_lut = vsi->type == I40E_VSI_MAIN;
ret = i40e_aq_set_rss_lut(hw, vsi->id, pf_lut, lut, lut_size);
if (ret) {
}
if (lut) {
- bool pf_lut = vsi->type == I40E_VSI_MAIN ? true : false;
+ bool pf_lut = vsi->type == I40E_VSI_MAIN;
ret = i40e_aq_get_rss_lut(hw, vsi->id, pf_lut, lut, lut_size);
if (ret) {
{
int ret;
- ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "net/mvmeta:online",
+ ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "net/mvneta:online",
mvneta_cpu_online,
mvneta_cpu_down_prepare);
if (ret < 0)
return __raw_readl(eth->base + reg);
}
+u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned reg)
+{
+ u32 val;
+
+ val = mtk_r32(eth, reg);
+ val &= ~mask;
+ val |= set;
+ mtk_w32(eth, val, reg);
+ return reg;
+}
+
static int mtk_mdio_busy_wait(struct mtk_eth *eth)
{
unsigned long t_start = jiffies;
struct mtk_mac *mac = container_of(config, struct mtk_mac,
phylink_config);
struct mtk_eth *eth = mac->hw;
- u32 mcr_cur, mcr_new, sid;
+ u32 mcr_cur, mcr_new, sid, i;
int val, ge_mode, err;
/* MT76x8 has no hardware settings between for the MAC */
PHY_INTERFACE_MODE_TRGMII)
mtk_gmac0_rgmii_adjust(mac->hw,
state->speed);
+
+ /* mt7623_pad_clk_setup */
+ for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
+ mtk_w32(mac->hw,
+ TD_DM_DRVP(8) | TD_DM_DRVN(8),
+ TRGMII_TD_ODT(i));
+
+ /* Assert/release MT7623 RXC reset */
+ mtk_m32(mac->hw, 0, RXC_RST | RXC_DQSISEL,
+ TRGMII_RCK_CTRL);
+ mtk_m32(mac->hw, RXC_RST, 0, TRGMII_RCK_CTRL);
}
}
#define DQSI0(x) ((x << 0) & GENMASK(6, 0))
#define DQSI1(x) ((x << 8) & GENMASK(14, 8))
#define RXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
+#define RXC_RST BIT(31)
#define RXC_DQSISEL BIT(30)
#define RCK_CTRL_RGMII_1000 (RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16))
#define RCK_CTRL_RGMII_10_100 RXCTL_DMWTLAT(2)
+#define NUM_TRGMII_CTRL 5
+
/* TRGMII RXC control register */
#define TRGMII_TCK_CTRL 0x10340
#define TXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
#define TCK_CTRL_RGMII_1000 TXCTL_DMWTLAT(2)
#define TCK_CTRL_RGMII_10_100 (TXC_INV | TXCTL_DMWTLAT(2))
+/* TRGMII TX Drive Strength */
+#define TRGMII_TD_ODT(i) (0x10354 + 8 * (i))
+#define TD_DM_DRVP(x) ((x) & 0xf)
+#define TD_DM_DRVN(x) (((x) & 0xf) << 4)
+
/* TRGMII Interface mode register */
#define INTF_MODE 0x10390
#define TRGMII_INTF_DIS BIT(0)
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/moduleparam.h>
+#include <linux/indirect_call_wrapper.h>
#include "mlx4_en.h"
}
}
+INDIRECT_CALLABLE_DECLARE(u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
+ struct mlx4_en_tx_ring *ring,
+ int index, u64 timestamp,
+ int napi_mode));
u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring,
return tx_info->nr_txbb;
}
+INDIRECT_CALLABLE_DECLARE(u32 mlx4_en_recycle_tx_desc(struct mlx4_en_priv *priv,
+ struct mlx4_en_tx_ring *ring,
+ int index, u64 timestamp,
+ int napi_mode));
+
u32 mlx4_en_recycle_tx_desc(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring,
int index, u64 timestamp,
timestamp = mlx4_en_get_cqe_ts(cqe);
/* free next descriptor */
- last_nr_txbb = ring->free_tx_desc(
+ last_nr_txbb = INDIRECT_CALL_2(ring->free_tx_desc,
+ mlx4_en_free_tx_desc,
+ mlx4_en_recycle_tx_desc,
priv, ring, ring_index,
timestamp, napi_budget);
tristate "Mellanox 5th generation network adapters (ConnectX series) core driver"
depends on PCI
select NET_DEVLINK
- imply PTP_1588_CLOCK
- imply VXLAN
- imply MLXFW
- imply PCI_HYPERV_INTERFACE
+ depends on VXLAN || !VXLAN
+ depends on MLXFW || !MLXFW
+ depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
+ depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
default n
---help---
Core driver for low level functionality of the ConnectX-4 and
if (err)
return err;
- return mlx5_firmware_flash(dev, fw, extack);
+ err = mlx5_firmware_flash(dev, fw, extack);
+ release_firmware(fw);
+
+ return err;
}
static u8 mlx5_fw_ver_major(u32 version)
return NULL;
}
- tracer = kzalloc(sizeof(*tracer), GFP_KERNEL);
+ tracer = kvzalloc(sizeof(*tracer), GFP_KERNEL);
if (!tracer)
return ERR_PTR(-ENOMEM);
tracer->dev = NULL;
destroy_workqueue(tracer->work_queue);
free_tracer:
- kfree(tracer);
+ kvfree(tracer);
return ERR_PTR(err);
}
mlx5_fw_tracer_destroy_log_buf(tracer);
flush_workqueue(tracer->work_queue);
destroy_workqueue(tracer->work_queue);
- kfree(tracer);
+ kvfree(tracer);
}
static int fw_tracer_event(struct notifier_block *nb, unsigned long action, void *data)
MLX5E_SQ_STATE_AM,
MLX5E_SQ_STATE_TLS,
MLX5E_SQ_STATE_VLAN_NEED_L2_INLINE,
+ MLX5E_SQ_STATE_PENDING_XSK_TX,
};
struct mlx5e_sq_wqe_info {
void mlx5e_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe);
void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe);
bool mlx5e_post_rx_wqes(struct mlx5e_rq *rq);
-void mlx5e_poll_ico_cq(struct mlx5e_cq *cq);
+int mlx5e_poll_ico_cq(struct mlx5e_cq *cq);
bool mlx5e_post_rx_mpwqes(struct mlx5e_rq *rq);
void mlx5e_dealloc_rx_wqe(struct mlx5e_rq *rq, u16 ix);
void mlx5e_dealloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix);
#include <net/flow_offload.h>
#include <net/netfilter/nf_flow_table.h>
#include <linux/workqueue.h>
+#include <linux/xarray.h>
#include "esw/chains.h"
#include "en/tc_ct.h"
struct mlx5_eswitch *esw;
const struct net_device *netdev;
struct idr fte_ids;
- struct idr tuple_ids;
+ struct xarray tuple_ids;
struct rhashtable zone_ht;
struct mlx5_flow_table *ct;
struct mlx5_flow_table *ct_nat;
struct nf_flowtable *nf_ft;
struct mlx5_tc_ct_priv *ct_priv;
struct rhashtable ct_entries_ht;
- struct list_head ct_entries_list;
};
struct mlx5_ct_entry {
- struct list_head list;
u16 zone;
struct rhash_head node;
struct flow_rule *flow_rule;
mlx5_eswitch_del_offloaded_rule(esw, zone_rule->rule, attr);
mlx5_modify_header_dealloc(esw->dev, attr->modify_hdr);
- idr_remove(&ct_priv->tuple_ids, zone_rule->tupleid);
+ xa_erase(&ct_priv->tuple_ids, zone_rule->tupleid);
}
static void
struct mlx5_esw_flow_attr *attr = &zone_rule->attr;
struct mlx5_eswitch *esw = ct_priv->esw;
struct mlx5_flow_spec *spec = NULL;
- u32 tupleid = 1;
+ u32 tupleid;
int err;
zone_rule->nat = nat;
return -ENOMEM;
/* Get tuple unique id */
- err = idr_alloc_u32(&ct_priv->tuple_ids, zone_rule, &tupleid,
- TUPLE_ID_MAX, GFP_KERNEL);
+ err = xa_alloc(&ct_priv->tuple_ids, &tupleid, zone_rule,
+ XA_LIMIT(1, TUPLE_ID_MAX), GFP_KERNEL);
if (err) {
netdev_warn(ct_priv->netdev,
"Failed to allocate tuple id, err: %d\n", err);
- goto err_idr_alloc;
+ goto err_xa_alloc;
}
zone_rule->tupleid = tupleid;
err_rule:
mlx5_modify_header_dealloc(esw->dev, attr->modify_hdr);
err_mod_hdr:
- idr_remove(&ct_priv->tuple_ids, zone_rule->tupleid);
-err_idr_alloc:
+ xa_erase(&ct_priv->tuple_ids, zone_rule->tupleid);
+err_xa_alloc:
kfree(spec);
return err;
}
if (err)
goto err_insert;
- list_add(&entry->list, &ft->ct_entries_list);
-
return 0;
err_insert:
WARN_ON(rhashtable_remove_fast(&ft->ct_entries_ht,
&entry->node,
cts_ht_params));
- list_del(&entry->list);
kfree(entry);
return 0;
ft->zone = zone;
ft->nf_ft = nf_ft;
ft->ct_priv = ct_priv;
- INIT_LIST_HEAD(&ft->ct_entries_list);
refcount_set(&ft->refcount, 1);
err = rhashtable_init(&ft->ct_entries_ht, &cts_ht_params);
}
static void
-mlx5_tc_ct_flush_ft(struct mlx5_tc_ct_priv *ct_priv, struct mlx5_ct_ft *ft)
+mlx5_tc_ct_flush_ft_entry(void *ptr, void *arg)
{
- struct mlx5_ct_entry *entry;
+ struct mlx5_tc_ct_priv *ct_priv = arg;
+ struct mlx5_ct_entry *entry = ptr;
- list_for_each_entry(entry, &ft->ct_entries_list, list)
- mlx5_tc_ct_entry_del_rules(ft->ct_priv, entry);
+ mlx5_tc_ct_entry_del_rules(ct_priv, entry);
}
static void
nf_flow_table_offload_del_cb(ft->nf_ft,
mlx5_tc_ct_block_flow_offload, ft);
- mlx5_tc_ct_flush_ft(ct_priv, ft);
rhashtable_remove_fast(&ct_priv->zone_ht, &ft->node, zone_params);
- rhashtable_destroy(&ft->ct_entries_ht);
+ rhashtable_free_and_destroy(&ft->ct_entries_ht,
+ mlx5_tc_ct_flush_ft_entry,
+ ct_priv);
kfree(ft);
}
}
idr_init(&ct_priv->fte_ids);
- idr_init(&ct_priv->tuple_ids);
+ xa_init_flags(&ct_priv->tuple_ids, XA_FLAGS_ALLOC1);
mutex_init(&ct_priv->control_lock);
rhashtable_init(&ct_priv->zone_ht, &zone_params);
rhashtable_destroy(&ct_priv->zone_ht);
mutex_destroy(&ct_priv->control_lock);
- idr_destroy(&ct_priv->tuple_ids);
+ xa_destroy(&ct_priv->tuple_ids);
idr_destroy(&ct_priv->fte_ids);
kfree(ct_priv);
if (!ct_priv || !tupleid)
return true;
- zone_rule = idr_find(&ct_priv->tuple_ids, tupleid);
+ zone_rule = xa_load(&ct_priv->tuple_ids, tupleid);
if (!zone_rule)
return false;
if (unlikely(!test_bit(MLX5E_SQ_STATE_ENABLED, &c->xskicosq.state)))
return 0;
+ if (test_and_set_bit(MLX5E_SQ_STATE_PENDING_XSK_TX, &c->xskicosq.state))
+ return 0;
+
spin_lock(&c->xskicosq_lock);
mlx5e_trigger_irq(&c->xskicosq);
spin_unlock(&c->xskicosq_lock);
struct mlx5e_vport_stats *vstats = &priv->stats.vport;
struct mlx5e_pport_stats *pstats = &priv->stats.pport;
- if (!mlx5e_monitor_counter_supported(priv)) {
+ /* In switchdev mode, monitor counters doesn't monitor
+ * rx/tx stats of 802_3. The update stats mechanism
+ * should keep the 802_3 layout counters updated
+ */
+ if (!mlx5e_monitor_counter_supported(priv) ||
+ mlx5e_is_uplink_rep(priv)) {
/* update HW stats in background for next time */
mlx5e_queue_update_stats(priv);
}
#ifdef CONFIG_MLX5_CORE_EN_DCB
mlx5e_dcbnl_delete_app(priv);
#endif
- mlx5e_devlink_port_unregister(priv);
unregister_netdev(priv->netdev);
+ mlx5e_devlink_port_unregister(priv);
mlx5e_detach(mdev, vpriv);
mlx5e_destroy_netdev(priv);
}
struct mlx5_eswitch_rep *rep = rpriv->rep;
struct netdev_phys_item_id ppid = {};
unsigned int dl_port_index = 0;
+ u16 pfnum;
if (!is_devlink_port_supported(dev, rpriv))
return 0;
mlx5e_rep_get_port_parent_id(rpriv->netdev, &ppid);
+ pfnum = PCI_FUNC(dev->pdev->devfn);
if (rep->vport == MLX5_VPORT_UPLINK) {
devlink_port_attrs_set(&rpriv->dl_port,
DEVLINK_PORT_FLAVOUR_PHYSICAL,
- PCI_FUNC(dev->pdev->devfn), false, 0,
+ pfnum, false, 0,
&ppid.id[0], ppid.id_len);
dl_port_index = vport_to_devlink_port_index(dev, rep->vport);
} else if (rep->vport == MLX5_VPORT_PF) {
devlink_port_attrs_pci_pf_set(&rpriv->dl_port,
&ppid.id[0], ppid.id_len,
- dev->pdev->devfn);
+ pfnum);
dl_port_index = rep->vport;
} else if (mlx5_eswitch_is_vf_vport(dev->priv.eswitch,
rpriv->rep->vport)) {
devlink_port_attrs_pci_vf_set(&rpriv->dl_port,
&ppid.id[0], ppid.id_len,
- dev->pdev->devfn,
- rep->vport - 1);
+ pfnum, rep->vport - 1);
dl_port_index = vport_to_devlink_port_index(dev, rep->vport);
}
return !!err;
}
-void mlx5e_poll_ico_cq(struct mlx5e_cq *cq)
+int mlx5e_poll_ico_cq(struct mlx5e_cq *cq)
{
struct mlx5e_icosq *sq = container_of(cq, struct mlx5e_icosq, cq);
struct mlx5_cqe64 *cqe;
int i;
if (unlikely(!test_bit(MLX5E_SQ_STATE_ENABLED, &sq->state)))
- return;
+ return 0;
cqe = mlx5_cqwq_get_cqe(&cq->wq);
if (likely(!cqe))
- return;
+ return 0;
/* sq->cc must be updated only after mlx5_cqwq_update_db_record(),
* otherwise a cq overrun may occur
sq->cc = sqcc;
mlx5_cqwq_update_db_record(&cq->wq);
+
+ return i;
}
bool mlx5e_post_rx_mpwqes(struct mlx5e_rq *rq)
if (err)
return err;
- if (attr->action & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR) {
+ if (attr->action & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR &&
+ !(attr->ct_attr.ct_action & TCA_CT_ACT_CLEAR)) {
err = mlx5e_attach_mod_hdr(priv, flow, parse_attr);
dealloc_mod_hdr_actions(&parse_attr->mod_hdr_acts);
if (err)
struct mlx5_esw_flow_attr *attr,
u32 *action)
{
- int nest_level = attr->parse_attr->filter_dev->lower_level;
struct flow_action_entry vlan_act = {
.id = FLOW_ACTION_VLAN_POP,
};
- int err = 0;
+ int nest_level, err = 0;
+ nest_level = attr->parse_attr->filter_dev->lower_level -
+ priv->netdev->lower_level;
while (nest_level--) {
err = parse_tc_vlan_action(priv, &vlan_act, attr, action);
if (err)
mlx5e_post_rx_wqes,
rq);
if (xsk_open) {
- mlx5e_poll_ico_cq(&c->xskicosq.cq);
+ if (mlx5e_poll_ico_cq(&c->xskicosq.cq))
+ /* Don't clear the flag if nothing was polled to prevent
+ * queueing more WQEs and overflowing XSKICOSQ.
+ */
+ clear_bit(MLX5E_SQ_STATE_PENDING_XSK_TX, &c->xskicosq.state);
busy |= mlx5e_poll_xdpsq_cq(&xsksq->cq);
busy_xsk |= mlx5e_napi_xsk_post(xsksq, xskrq);
}
MLX5_ESW_ATTR_FLAG_VLAN_HANDLED = BIT(0),
MLX5_ESW_ATTR_FLAG_SLOW_PATH = BIT(1),
MLX5_ESW_ATTR_FLAG_NO_IN_PORT = BIT(2),
- MLX5_ESW_ATTR_FLAG_HAIRPIN = BIT(3),
};
struct mlx5_esw_flow_attr {
bool split = !!(attr->split_count);
struct mlx5_flow_handle *rule;
struct mlx5_flow_table *fdb;
- bool hairpin = false;
int j, i = 0;
if (esw->mode != MLX5_ESWITCH_OFFLOADS)
goto err_esw_get;
}
- if (mlx5_eswitch_termtbl_required(esw, attr, &flow_act, spec)) {
+ if (mlx5_eswitch_termtbl_required(esw, attr, &flow_act, spec))
rule = mlx5_eswitch_add_termtbl_rule(esw, fdb, spec, attr,
&flow_act, dest, i);
- hairpin = true;
- } else {
+ else
rule = mlx5_add_flow_rules(fdb, spec, &flow_act, dest, i);
- }
if (IS_ERR(rule))
goto err_add_rule;
else
atomic64_inc(&esw->offloads.num_flows);
- if (hairpin)
- attr->flags |= MLX5_ESW_ATTR_FLAG_HAIRPIN;
-
return rule;
err_add_rule:
mlx5_del_flow_rules(rule);
- if (attr->flags & MLX5_ESW_ATTR_FLAG_HAIRPIN) {
+ if (!(attr->flags & MLX5_ESW_ATTR_FLAG_SLOW_PATH)) {
/* unref the term table */
for (i = 0; i < MLX5_MAX_FLOW_FWD_VPORTS; i++) {
if (attr->dests[i].termtbl)
if (mlx5_get_nic_state(dev) == MLX5_NIC_IFC_DISABLED)
break;
- cond_resched();
+ msleep(20);
} while (!time_after(jiffies, end));
if (mlx5_get_nic_state(dev) != MLX5_NIC_IFC_DISABLED) {
block = kzalloc(sizeof(*block), GFP_KERNEL);
if (!block)
- return NULL;
+ return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&block->resource_list);
block->afa = mlxsw_afa;
mlxsw_afa_set_destroy(block->first_set);
err_first_set_create:
kfree(block);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
EXPORT_SYMBOL(mlxsw_afa_block_create);
* to be written using PEFA register to all indexes for all regions.
*/
afa_block = mlxsw_afa_block_create(mlxsw_sp->afa);
- if (!afa_block) {
- err = -ENOMEM;
+ if (IS_ERR(afa_block)) {
+ err = PTR_ERR(afa_block);
goto err_afa_block;
}
err = mlxsw_afa_block_continue(afa_block);
rulei = kzalloc(sizeof(*rulei), GFP_KERNEL);
if (!rulei)
- return NULL;
+ return ERR_PTR(-ENOMEM);
if (afa_block) {
rulei->act_block = afa_block;
int err;
afa_block = mlxsw_afa_block_create(mlxsw_sp->afa);
- if (!afa_block)
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(afa_block))
+ return afa_block;
err = mlxsw_afa_block_append_allocated_counter(afa_block,
counter_index);
ocelot_write(ocelot, val, ANA_VLANMASK);
}
-void ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
- bool vlan_aware)
+static int ocelot_port_set_native_vlan(struct ocelot *ocelot, int port,
+ u16 vid)
{
struct ocelot_port *ocelot_port = ocelot->ports[port];
- u32 val;
+ u32 val = 0;
- if (vlan_aware)
- val = ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
- ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1);
- else
- val = 0;
- ocelot_rmw_gix(ocelot, val,
- ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
- ANA_PORT_VLAN_CFG_VLAN_POP_CNT_M,
- ANA_PORT_VLAN_CFG, port);
+ if (ocelot_port->vid != vid) {
+ /* Always permit deleting the native VLAN (vid = 0) */
+ if (ocelot_port->vid && vid) {
+ dev_err(ocelot->dev,
+ "Port already has a native VLAN: %d\n",
+ ocelot_port->vid);
+ return -EBUSY;
+ }
+ ocelot_port->vid = vid;
+ }
+
+ ocelot_rmw_gix(ocelot, REW_PORT_VLAN_CFG_PORT_VID(vid),
+ REW_PORT_VLAN_CFG_PORT_VID_M,
+ REW_PORT_VLAN_CFG, port);
- if (vlan_aware && !ocelot_port->vid)
+ if (ocelot_port->vlan_aware && !ocelot_port->vid)
/* If port is vlan-aware and tagged, drop untagged and priority
* tagged frames.
*/
val = ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;
- else
- val = 0;
ocelot_rmw_gix(ocelot, val,
ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA,
ANA_PORT_DROP_CFG, port);
- if (vlan_aware) {
+ if (ocelot_port->vlan_aware) {
if (ocelot_port->vid)
/* Tag all frames except when VID == DEFAULT_VLAN */
- val |= REW_TAG_CFG_TAG_CFG(1);
+ val = REW_TAG_CFG_TAG_CFG(1);
else
/* Tag all frames */
- val |= REW_TAG_CFG_TAG_CFG(3);
+ val = REW_TAG_CFG_TAG_CFG(3);
} else {
/* Port tagging disabled. */
val = REW_TAG_CFG_TAG_CFG(0);
ocelot_rmw_gix(ocelot, val,
REW_TAG_CFG_TAG_CFG_M,
REW_TAG_CFG, port);
+
+ return 0;
}
-EXPORT_SYMBOL(ocelot_port_vlan_filtering);
-static int ocelot_port_set_native_vlan(struct ocelot *ocelot, int port,
- u16 vid)
+void ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
+ bool vlan_aware)
{
struct ocelot_port *ocelot_port = ocelot->ports[port];
+ u32 val;
- if (ocelot_port->vid != vid) {
- /* Always permit deleting the native VLAN (vid = 0) */
- if (ocelot_port->vid && vid) {
- dev_err(ocelot->dev,
- "Port already has a native VLAN: %d\n",
- ocelot_port->vid);
- return -EBUSY;
- }
- ocelot_port->vid = vid;
- }
+ ocelot_port->vlan_aware = vlan_aware;
- ocelot_rmw_gix(ocelot, REW_PORT_VLAN_CFG_PORT_VID(vid),
- REW_PORT_VLAN_CFG_PORT_VID_M,
- REW_PORT_VLAN_CFG, port);
+ if (vlan_aware)
+ val = ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
+ ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1);
+ else
+ val = 0;
+ ocelot_rmw_gix(ocelot, val,
+ ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA |
+ ANA_PORT_VLAN_CFG_VLAN_POP_CNT_M,
+ ANA_PORT_VLAN_CFG, port);
- return 0;
+ ocelot_port_set_native_vlan(ocelot, port, ocelot_port->vid);
}
+EXPORT_SYMBOL(ocelot_port_vlan_filtering);
/* Default vlan to clasify for untagged frames (may be zero) */
static void ocelot_port_set_pvid(struct ocelot *ocelot, int port, u16 pvid)
}
int ocelot_fdb_add(struct ocelot *ocelot, int port,
- const unsigned char *addr, u16 vid, bool vlan_aware)
+ const unsigned char *addr, u16 vid)
{
struct ocelot_port *ocelot_port = ocelot->ports[port];
if (!vid) {
- if (!vlan_aware)
+ if (!ocelot_port->vlan_aware)
/* If the bridge is not VLAN aware and no VID was
* provided, set it to pvid to ensure the MAC entry
* matches incoming untagged packets
struct ocelot *ocelot = priv->port.ocelot;
int port = priv->chip_port;
- return ocelot_fdb_add(ocelot, port, addr, vid, priv->vlan_aware);
+ return ocelot_fdb_add(ocelot, port, addr, vid);
}
int ocelot_fdb_del(struct ocelot *ocelot, int port,
ocelot_port_attr_ageing_set(ocelot, port, attr->u.ageing_time);
break;
case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
- priv->vlan_aware = attr->u.vlan_filtering;
- ocelot_port_vlan_filtering(ocelot, port, priv->vlan_aware);
+ ocelot_port_vlan_filtering(ocelot, port,
+ attr->u.vlan_filtering);
break;
case SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED:
ocelot_port_attr_mc_set(ocelot, port, !attr->u.mc_disabled);
} else {
err = ocelot_port_bridge_leave(ocelot, port,
info->upper_dev);
- priv->vlan_aware = false;
}
}
if (netif_is_lag_master(info->upper_dev)) {
struct phy_device *phy;
u8 chip_port;
- u8 vlan_aware;
-
struct phy *serdes;
struct ocelot_port_tc tc;
/* read mac entries from CAM */
static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
{
- u64 tmp64 = 0xffffffffffff0000ULL, val64;
+ u64 tmp64, val64;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
/* read mac addr */
if (lif->registered)
ionic_lif_set_netdev_info(lif);
+ ionic_rx_filter_replay(lif);
+
if (netif_running(lif->netdev)) {
err = ionic_txrx_alloc(lif);
if (err)
if (!test_bit(IONIC_LIF_F_FW_RESET, lif->state)) {
cancel_work_sync(&lif->deferred.work);
cancel_work_sync(&lif->tx_timeout_work);
+ ionic_rx_filters_deinit(lif);
}
- ionic_rx_filters_deinit(lif);
if (lif->netdev->features & NETIF_F_RXHASH)
ionic_lif_rss_deinit(lif);
err = ionic_adminq_post_wait(lif, &ctx);
if (err)
return err;
-
+ netdev_dbg(lif->netdev, "found initial MAC addr %pM\n",
+ ctx.comp.lif_getattr.mac);
if (is_zero_ether_addr(ctx.comp.lif_getattr.mac))
return 0;
- memcpy(addr.sa_data, ctx.comp.lif_getattr.mac, netdev->addr_len);
- addr.sa_family = AF_INET;
- err = eth_prepare_mac_addr_change(netdev, &addr);
- if (err) {
- netdev_warn(lif->netdev, "ignoring bad MAC addr from NIC %pM - err %d\n",
- addr.sa_data, err);
- return 0;
- }
+ if (!ether_addr_equal(ctx.comp.lif_getattr.mac, netdev->dev_addr)) {
+ memcpy(addr.sa_data, ctx.comp.lif_getattr.mac, netdev->addr_len);
+ addr.sa_family = AF_INET;
+ err = eth_prepare_mac_addr_change(netdev, &addr);
+ if (err) {
+ netdev_warn(lif->netdev, "ignoring bad MAC addr from NIC %pM - err %d\n",
+ addr.sa_data, err);
+ return 0;
+ }
- netdev_dbg(lif->netdev, "deleting station MAC addr %pM\n",
- netdev->dev_addr);
- ionic_lif_addr(lif, netdev->dev_addr, false);
+ if (!is_zero_ether_addr(netdev->dev_addr)) {
+ netdev_dbg(lif->netdev, "deleting station MAC addr %pM\n",
+ netdev->dev_addr);
+ ionic_lif_addr(lif, netdev->dev_addr, false);
+ }
+
+ eth_commit_mac_addr_change(netdev, &addr);
+ }
- eth_commit_mac_addr_change(netdev, &addr);
netdev_dbg(lif->netdev, "adding station MAC addr %pM\n",
netdev->dev_addr);
ionic_lif_addr(lif, netdev->dev_addr, true);
if (err)
goto err_out_notifyq_deinit;
- err = ionic_rx_filters_init(lif);
- if (err)
- goto err_out_notifyq_deinit;
+ if (!test_bit(IONIC_LIF_F_FW_RESET, lif->state)) {
+ err = ionic_rx_filters_init(lif);
+ if (err)
+ goto err_out_notifyq_deinit;
+ }
err = ionic_station_set(lif);
if (err)
/* Copyright(c) 2017 - 2019 Pensando Systems, Inc */
#include <linux/netdevice.h>
+#include <linux/dynamic_debug.h>
#include <linux/etherdevice.h>
#include "ionic.h"
devm_kfree(dev, f);
}
-int ionic_rx_filter_del(struct ionic_lif *lif, struct ionic_rx_filter *f)
+void ionic_rx_filter_replay(struct ionic_lif *lif)
{
- struct ionic_admin_ctx ctx = {
- .work = COMPLETION_INITIALIZER_ONSTACK(ctx.work),
- .cmd.rx_filter_del = {
- .opcode = IONIC_CMD_RX_FILTER_DEL,
- .filter_id = cpu_to_le32(f->filter_id),
- },
- };
-
- return ionic_adminq_post_wait(lif, &ctx);
+ struct ionic_rx_filter_add_cmd *ac;
+ struct ionic_admin_ctx ctx;
+ struct ionic_rx_filter *f;
+ struct hlist_head *head;
+ struct hlist_node *tmp;
+ unsigned int i;
+ int err;
+
+ ac = &ctx.cmd.rx_filter_add;
+
+ for (i = 0; i < IONIC_RX_FILTER_HLISTS; i++) {
+ head = &lif->rx_filters.by_id[i];
+ hlist_for_each_entry_safe(f, tmp, head, by_id) {
+ ctx.work = COMPLETION_INITIALIZER_ONSTACK(ctx.work);
+ memcpy(ac, &f->cmd, sizeof(f->cmd));
+ dev_dbg(&lif->netdev->dev, "replay filter command:\n");
+ dynamic_hex_dump("cmd ", DUMP_PREFIX_OFFSET, 16, 1,
+ &ctx.cmd, sizeof(ctx.cmd), true);
+
+ err = ionic_adminq_post_wait(lif, &ctx);
+ if (err) {
+ switch (le16_to_cpu(ac->match)) {
+ case IONIC_RX_FILTER_MATCH_VLAN:
+ netdev_info(lif->netdev, "Replay failed - %d: vlan %d\n",
+ err,
+ le16_to_cpu(ac->vlan.vlan));
+ break;
+ case IONIC_RX_FILTER_MATCH_MAC:
+ netdev_info(lif->netdev, "Replay failed - %d: mac %pM\n",
+ err, ac->mac.addr);
+ break;
+ case IONIC_RX_FILTER_MATCH_MAC_VLAN:
+ netdev_info(lif->netdev, "Replay failed - %d: vlan %d mac %pM\n",
+ err,
+ le16_to_cpu(ac->vlan.vlan),
+ ac->mac.addr);
+ break;
+ }
+ }
+ }
+ }
}
int ionic_rx_filters_init(struct ionic_lif *lif)
};
void ionic_rx_filter_free(struct ionic_lif *lif, struct ionic_rx_filter *f);
-int ionic_rx_filter_del(struct ionic_lif *lif, struct ionic_rx_filter *f);
+void ionic_rx_filter_replay(struct ionic_lif *lif);
int ionic_rx_filters_init(struct ionic_lif *lif);
void ionic_rx_filters_deinit(struct ionic_lif *lif);
int ionic_rx_filter_save(struct ionic_lif *lif, u32 flow_id, u16 rxq_index,
-
-/*
- * snull.h -- definitions for the network module
- *
- * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
- * Copyright (C) 2001 O'Reilly & Associates
- *
- * The source code in this file can be freely used, adapted,
- * and redistributed in source or binary form, so long as an
- * acknowledgment appears in derived source files. The citation
- * should list that the code comes from the book "Linux Device
- * Drivers" by Alessandro Rubini and Jonathan Corbet, published
- * by O'Reilly & Associates. No warranty is attached;
- * we cannot take responsibility for errors or fitness for use.
- */
-
/* version dependencies have been confined to a separate file */
/* Tunable parameters */
#include <linux/clk-provider.h>
#include <linux/pci.h>
#include <linux/dmi.h>
+#include "dwmac-intel.h"
#include "stmmac.h"
+struct intel_priv_data {
+ int mdio_adhoc_addr; /* mdio address for serdes & etc */
+};
+
/* This struct is used to associate PCI Function of MAC controller on a board,
* discovered via DMI, with the address of PHY connected to the MAC. The
* negative value of the address means that MAC controller is not connected
return -ENODEV;
}
+static int serdes_status_poll(struct stmmac_priv *priv, int phyaddr,
+ int phyreg, u32 mask, u32 val)
+{
+ unsigned int retries = 10;
+ int val_rd;
+
+ do {
+ val_rd = mdiobus_read(priv->mii, phyaddr, phyreg);
+ if ((val_rd & mask) == (val & mask))
+ return 0;
+ udelay(POLL_DELAY_US);
+ } while (--retries);
+
+ return -ETIMEDOUT;
+}
+
+static int intel_serdes_powerup(struct net_device *ndev, void *priv_data)
+{
+ struct intel_priv_data *intel_priv = priv_data;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int serdes_phy_addr = 0;
+ u32 data = 0;
+
+ if (!intel_priv->mdio_adhoc_addr)
+ return 0;
+
+ serdes_phy_addr = intel_priv->mdio_adhoc_addr;
+
+ /* assert clk_req */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data |= SERDES_PLL_CLK;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* check for clk_ack assertion */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PLL_CLK,
+ SERDES_PLL_CLK);
+
+ if (data) {
+ dev_err(priv->device, "Serdes PLL clk request timeout\n");
+ return data;
+ }
+
+ /* assert lane reset */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data |= SERDES_RST;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* check for assert lane reset reflection */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_RST,
+ SERDES_RST);
+
+ if (data) {
+ dev_err(priv->device, "Serdes assert lane reset timeout\n");
+ return data;
+ }
+
+ /* move power state to P0 */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data &= ~SERDES_PWR_ST_MASK;
+ data |= SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* Check for P0 state */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PWR_ST_MASK,
+ SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT);
+
+ if (data) {
+ dev_err(priv->device, "Serdes power state P0 timeout.\n");
+ return data;
+ }
+
+ return 0;
+}
+
+static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data)
+{
+ struct intel_priv_data *intel_priv = intel_data;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int serdes_phy_addr = 0;
+ u32 data = 0;
+
+ if (!intel_priv->mdio_adhoc_addr)
+ return;
+
+ serdes_phy_addr = intel_priv->mdio_adhoc_addr;
+
+ /* move power state to P3 */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data &= ~SERDES_PWR_ST_MASK;
+ data |= SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* Check for P3 state */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PWR_ST_MASK,
+ SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT);
+
+ if (data) {
+ dev_err(priv->device, "Serdes power state P3 timeout\n");
+ return;
+ }
+
+ /* de-assert clk_req */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data &= ~SERDES_PLL_CLK;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* check for clk_ack de-assert */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PLL_CLK,
+ (u32)~SERDES_PLL_CLK);
+
+ if (data) {
+ dev_err(priv->device, "Serdes PLL clk de-assert timeout\n");
+ return;
+ }
+
+ /* de-assert lane reset */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data &= ~SERDES_RST;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* check for de-assert lane reset reflection */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_RST,
+ (u32)~SERDES_RST);
+
+ if (data) {
+ dev_err(priv->device, "Serdes de-assert lane reset timeout\n");
+ return;
+ }
+}
+
static void common_default_data(struct plat_stmmacenet_data *plat)
{
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
+
return ehl_common_data(pdev, plat);
}
struct plat_stmmacenet_data *plat)
{
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
return ehl_pse0_common_data(pdev, plat);
}
struct plat_stmmacenet_data *plat)
{
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
return ehl_pse1_common_data(pdev, plat);
}
plat->bus_id = 1;
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
return tgl_common_data(pdev, plat);
}
const struct pci_device_id *id)
{
struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
+ struct intel_priv_data *intel_priv;
struct plat_stmmacenet_data *plat;
struct stmmac_resources res;
int i;
int ret;
+ intel_priv = devm_kzalloc(&pdev->dev, sizeof(*intel_priv),
+ GFP_KERNEL);
+ if (!intel_priv)
+ return -ENOMEM;
+
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
if (!plat)
return -ENOMEM;
pci_set_master(pdev);
+ plat->bsp_priv = intel_priv;
+ intel_priv->mdio_adhoc_addr = 0x15;
+
ret = info->setup(pdev, plat);
if (ret)
return ret;
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2020, Intel Corporation
+ * DWMAC Intel header file
+ */
+
+#ifndef __DWMAC_INTEL_H__
+#define __DWMAC_INTEL_H__
+
+#define POLL_DELAY_US 8
+
+/* SERDES Register */
+#define SERDES_GSR0 0x5 /* Global Status Reg0 */
+#define SERDES_GCR0 0xb /* Global Configuration Reg0 */
+
+/* SERDES defines */
+#define SERDES_PLL_CLK BIT(0) /* PLL clk valid signal */
+#define SERDES_RST BIT(2) /* Serdes Reset */
+#define SERDES_PWR_ST_MASK GENMASK(6, 4) /* Serdes Power state*/
+#define SERDES_PWR_ST_SHIFT 4
+#define SERDES_PWR_ST_P0 0x0
+#define SERDES_PWR_ST_P3 0x3
+
+#endif /* __DWMAC_INTEL_H__ */
{ .div = 5, .val = 5, },
{ .div = 6, .val = 6, },
{ .div = 7, .val = 7, },
+ { /* end of array */ }
};
clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL);
switch (phymode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
break;
case PHY_INTERFACE_MODE_MII:
phymode == PHY_INTERFACE_MODE_MII ||
phymode == PHY_INTERFACE_MODE_GMII ||
phymode == PHY_INTERFACE_MODE_SGMII) {
- ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
&module);
module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2));
regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
module);
- } else {
- ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2));
}
+ if (dwmac->f2h_ptp_ref_clk)
+ ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
+ else
+ ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
+ (reg_shift / 2));
+
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
/* Deassert reset for the phy configuration to be sampled by
plat_dat->init = sun7i_gmac_init;
plat_dat->exit = sun7i_gmac_exit;
plat_dat->fix_mac_speed = sun7i_fix_speed;
+ plat_dat->tx_fifo_size = 4096;
+ plat_dat->rx_fifo_size = 16384;
ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv);
if (ret)
unsigned long data;
u32 reg_value;
- /* For GMAC3.x, 4.x versions, convert the ptp_clock to nano second
- * formula = (1/ptp_clock) * 1000000000
- * where ptp_clock is 50MHz if fine method is used to update system
+ /* For GMAC3.x, 4.x versions, in "fine adjustement mode" set sub-second
+ * increment to twice the number of nanoseconds of a clock cycle.
+ * The calculation of the default_addend value by the caller will set it
+ * to mid-range = 2^31 when the remainder of this division is zero,
+ * which will make the accumulator overflow once every 2 ptp_clock
+ * cycles, adding twice the number of nanoseconds of a clock cycle :
+ * 2000000000ULL / ptp_clock.
*/
if (value & PTP_TCR_TSCFUPDT)
- data = (1000000000ULL / 50000000);
+ data = (2000000000ULL / ptp_clock);
else
data = (1000000000ULL / ptp_clock);
goto error_netdev_register;
}
+ if (priv->plat->serdes_powerup) {
+ ret = priv->plat->serdes_powerup(ndev,
+ priv->plat->bsp_priv);
+
+ if (ret < 0)
+ return ret;
+ }
+
#ifdef CONFIG_DEBUG_FS
stmmac_init_fs(ndev);
#endif
stmmac_stop_all_dma(priv);
+ if (priv->plat->serdes_powerdown)
+ priv->plat->serdes_powerdown(ndev, priv->plat->bsp_priv);
+
stmmac_mac_set(priv, priv->ioaddr, false);
netif_carrier_off(ndev);
unregister_netdev(ndev);
/* Stop TX/RX DMA */
stmmac_stop_all_dma(priv);
+ if (priv->plat->serdes_powerdown)
+ priv->plat->serdes_powerdown(ndev, priv->plat->bsp_priv);
+
/* Enable Power down mode by programming the PMT regs */
if (device_may_wakeup(priv->device)) {
stmmac_pmt(priv, priv->hw, priv->wolopts);
{
struct net_device *ndev = dev_get_drvdata(dev);
struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret;
if (!netif_running(ndev))
return 0;
stmmac_mdio_reset(priv->mii);
}
+ if (priv->plat->serdes_powerup) {
+ ret = priv->plat->serdes_powerup(ndev,
+ priv->plat->bsp_priv);
+
+ if (ret < 0)
+ return ret;
+ }
+
netif_device_attach(ndev);
mutex_lock(&priv->lock);
err:
i = devm_add_action(dev, am65_cpsw_nuss_free_tx_chns, common);
if (i) {
- dev_err(dev, "failed to add free_tx_chns action %d", i);
+ dev_err(dev, "Failed to add free_tx_chns action %d\n", i);
return i;
}
err:
i = devm_add_action(dev, am65_cpsw_nuss_free_rx_chns, common);
if (i) {
- dev_err(dev, "failed to add free_rx_chns action %d", i);
+ dev_err(dev, "Failed to add free_rx_chns action %d\n", i);
return i;
}
ret = devm_add_action_or_reset(dev, am65_cpsw_pcpu_stats_free,
ndev_priv->stats);
if (ret) {
- dev_err(dev, "failed to add percpu stat free action %d", ret);
+ dev_err(dev, "Failed to add percpu stat free action %d\n", ret);
return ret;
}
return -ENODEV;
regs_phys = res->start;
port->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(port->regs))
+ return PTR_ERR(port->regs);
switch (port->id) {
case IXP4XX_ETH_NPEA:
enum ifla_geneve_df df = nla_get_u8(data[IFLA_GENEVE_DF]);
if (df < 0 || df > GENEVE_DF_MAX) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_GENEVE_DF],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_GENEVE_DF],
"Invalid DF attribute");
return -EINVAL;
}
ret = ipa_endpoint_modem_exception_reset_all(ipa);
if (ret)
- dev_err(dev, "error %d resetting exception endpoint",
- ret);
+ dev_err(dev, "error %d resetting exception endpoint\n", ret);
ipa_endpoint_modem_pause_all(ipa, false);
ret = ipa_modem_stop(ipa);
if (ret)
- dev_err(dev, "error %d stopping modem", ret);
+ dev_err(dev, "error %d stopping modem\n", ret);
/* Now prepare for the next modem boot */
ret = ipa_mem_zero_modem(ipa);
struct netlink_ext_ack *extack)
{
struct macsec_dev *macsec = macsec_priv(dev);
- struct macsec_tx_sa tx_sc;
+ struct macsec_tx_sc tx_sc;
struct macsec_secy secy;
int ret;
struct netlink_ext_ack *extack)
{
struct macsec_dev *macsec = macsec_priv(dev);
+ rx_handler_func_t *rx_handler;
+ u8 icv_len = DEFAULT_ICV_LEN;
struct net_device *real_dev;
- int err;
+ int err, mtu;
sci_t sci;
- u8 icv_len = DEFAULT_ICV_LEN;
- rx_handler_func_t *rx_handler;
if (!tb[IFLA_LINK])
return -EINVAL;
if (data && data[IFLA_MACSEC_ICV_LEN])
icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
- dev->mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
+ mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
+ if (mtu < 0)
+ dev->mtu = 0;
+ else
+ dev->mtu = mtu;
rx_handler = rtnl_dereference(real_dev->rx_handler);
if (rx_handler && rx_handler != macsec_handle_frame)
struct macvlan_dev,
list);
- if (macvlan_sync_address(vlan->dev, dev->dev_addr))
+ if (vlan && macvlan_sync_address(vlan->dev, dev->dev_addr))
return NOTIFY_BAD;
break;
if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete)
phydev->link = false;
- if (!phydev->link)
- return 0;
-
linkmode_zero(phydev->lp_advertising);
phydev->speed = SPEED_UNKNOWN;
phydev->duplex = DUPLEX_UNKNOWN;
phydev->asym_pause = 0;
phydev->mdix = 0;
+ if (!phydev->link)
+ return 0;
+
if (phydev->autoneg_complete) {
val = genphy_c45_read_lpa(phydev);
if (val < 0)
int lpa;
int err;
+ if (!(status & MII_M1011_PHY_STATUS_RESOLVED)) {
+ phydev->link = 0;
+ return 0;
+ }
+
+ if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ switch (status & MII_M1011_PHY_STATUS_SPD_MASK) {
+ case MII_M1011_PHY_STATUS_1000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case MII_M1011_PHY_STATUS_100:
+ phydev->speed = SPEED_100;
+ break;
+
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
if (!fiber) {
err = genphy_read_lpa(phydev);
if (err < 0)
}
}
- if (!(status & MII_M1011_PHY_STATUS_RESOLVED))
- return 0;
-
- if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
- phydev->duplex = DUPLEX_FULL;
- else
- phydev->duplex = DUPLEX_HALF;
-
- switch (status & MII_M1011_PHY_STATUS_SPD_MASK) {
- case MII_M1011_PHY_STATUS_1000:
- phydev->speed = SPEED_1000;
- break;
-
- case MII_M1011_PHY_STATUS_100:
- phydev->speed = SPEED_100;
- break;
-
- default:
- phydev->speed = SPEED_10;
- break;
- }
-
return 0;
}
#define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa)
enum {
+ MV_PMA_FW_VER0 = 0xc011,
+ MV_PMA_FW_VER1 = 0xc012,
MV_PMA_BOOT = 0xc050,
MV_PMA_BOOT_FATAL = BIT(0),
/* Vendor2 MMD registers */
MV_V2_PORT_CTRL = 0xf001,
- MV_V2_PORT_CTRL_PWRDOWN = 0x0800,
+ MV_V2_PORT_CTRL_SWRST = BIT(15),
+ MV_V2_PORT_CTRL_PWRDOWN = BIT(11),
MV_V2_TEMP_CTRL = 0xf08a,
MV_V2_TEMP_CTRL_MASK = 0xc000,
MV_V2_TEMP_CTRL_SAMPLE = 0x0000,
};
struct mv3310_priv {
+ u32 firmware_ver;
+
struct device *hwmon_dev;
char *hwmon_name;
};
static int mv3310_power_up(struct phy_device *phydev)
{
- return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
- MV_V2_PORT_CTRL_PWRDOWN);
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ int ret;
+
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+ MV_V2_PORT_CTRL_PWRDOWN);
+
+ if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310 ||
+ priv->firmware_ver < 0x00030000)
+ return ret;
+
+ return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+ MV_V2_PORT_CTRL_SWRST);
}
static int mv3310_reset(struct phy_device *phydev, u32 unit)
dev_set_drvdata(&phydev->mdio.dev, priv);
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0);
+ if (ret < 0)
+ return ret;
+
+ priv->firmware_ver = ret << 16;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER1);
+ if (ret < 0)
+ return ret;
+
+ priv->firmware_ver |= ret;
+
+ phydev_info(phydev, "Firmware version %u.%u.%u.%u\n",
+ priv->firmware_ver >> 24, (priv->firmware_ver >> 16) & 255,
+ (priv->firmware_ver >> 8) & 255, priv->firmware_ver & 255);
+
/* Powering down the port when not in use saves about 600mW */
ret = mv3310_power_down(phydev);
if (ret)
/**
* mdio_find_bus - Given the name of a mdiobus, find the mii_bus.
- * @mdio_bus_np: Pointer to the mii_bus.
+ * @mdio_name: The name of a mdiobus.
*
* Returns a reference to the mii_bus, or NULL if none found. The
* embedded struct device will have its reference count incremented,
.driver_data = &ksz9021_type,
.probe = kszphy_probe,
.config_init = ksz9131_config_init,
- .read_status = ksz9031_read_status,
+ .read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = kszphy_config_intr,
.get_sset_count = kszphy_get_sset_count,
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/mii.h>
#include <linux/phy.h>
+/* External Register Control Register */
+#define LAN87XX_EXT_REG_CTL (0x14)
+#define LAN87XX_EXT_REG_CTL_RD_CTL (0x1000)
+#define LAN87XX_EXT_REG_CTL_WR_CTL (0x0800)
+
+/* External Register Read Data Register */
+#define LAN87XX_EXT_REG_RD_DATA (0x15)
+
+/* External Register Write Data Register */
+#define LAN87XX_EXT_REG_WR_DATA (0x16)
+
/* Interrupt Source Register */
#define LAN87XX_INTERRUPT_SOURCE (0x18)
#define LAN87XX_MASK_LINK_UP (0x0004)
#define LAN87XX_MASK_LINK_DOWN (0x0002)
+/* phyaccess nested types */
+#define PHYACC_ATTR_MODE_READ 0
+#define PHYACC_ATTR_MODE_WRITE 1
+#define PHYACC_ATTR_MODE_MODIFY 2
+
+#define PHYACC_ATTR_BANK_SMI 0
+#define PHYACC_ATTR_BANK_MISC 1
+#define PHYACC_ATTR_BANK_PCS 2
+#define PHYACC_ATTR_BANK_AFE 3
+#define PHYACC_ATTR_BANK_MAX 7
+
#define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>"
#define DRIVER_DESC "Microchip LAN87XX T1 PHY driver"
+struct access_ereg_val {
+ u8 mode;
+ u8 bank;
+ u8 offset;
+ u16 val;
+ u16 mask;
+};
+
+static int access_ereg(struct phy_device *phydev, u8 mode, u8 bank,
+ u8 offset, u16 val)
+{
+ u16 ereg = 0;
+ int rc = 0;
+
+ if (mode > PHYACC_ATTR_MODE_WRITE || bank > PHYACC_ATTR_BANK_MAX)
+ return -EINVAL;
+
+ if (bank == PHYACC_ATTR_BANK_SMI) {
+ if (mode == PHYACC_ATTR_MODE_WRITE)
+ rc = phy_write(phydev, offset, val);
+ else
+ rc = phy_read(phydev, offset);
+ return rc;
+ }
+
+ if (mode == PHYACC_ATTR_MODE_WRITE) {
+ ereg = LAN87XX_EXT_REG_CTL_WR_CTL;
+ rc = phy_write(phydev, LAN87XX_EXT_REG_WR_DATA, val);
+ if (rc < 0)
+ return rc;
+ } else {
+ ereg = LAN87XX_EXT_REG_CTL_RD_CTL;
+ }
+
+ ereg |= (bank << 8) | offset;
+
+ rc = phy_write(phydev, LAN87XX_EXT_REG_CTL, ereg);
+ if (rc < 0)
+ return rc;
+
+ if (mode == PHYACC_ATTR_MODE_READ)
+ rc = phy_read(phydev, LAN87XX_EXT_REG_RD_DATA);
+
+ return rc;
+}
+
+static int access_ereg_modify_changed(struct phy_device *phydev,
+ u8 bank, u8 offset, u16 val, u16 mask)
+{
+ int new = 0, rc = 0;
+
+ if (bank > PHYACC_ATTR_BANK_MAX)
+ return -EINVAL;
+
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, bank, offset, val);
+ if (rc < 0)
+ return rc;
+
+ new = val | (rc & (mask ^ 0xFFFF));
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE, bank, offset, new);
+
+ return rc;
+}
+
+static int lan87xx_phy_init(struct phy_device *phydev)
+{
+ static const struct access_ereg_val init[] = {
+ /* TX Amplitude = 5 */
+ {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_AFE, 0x0B,
+ 0x000A, 0x001E},
+ /* Clear SMI interrupts */
+ {PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_SMI, 0x18,
+ 0, 0},
+ /* Clear MISC interrupts */
+ {PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_MISC, 0x08,
+ 0, 0},
+ /* Turn on TC10 Ring Oscillator (ROSC) */
+ {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_MISC, 0x20,
+ 0x0020, 0x0020},
+ /* WUR Detect Length to 1.2uS, LPC Detect Length to 1.09uS */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_PCS, 0x20,
+ 0x283C, 0},
+ /* Wake_In Debounce Length to 39uS, Wake_Out Length to 79uS */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x21,
+ 0x274F, 0},
+ /* Enable Auto Wake Forward to Wake_Out, ROSC on, Sleep,
+ * and Wake_In to wake PHY
+ */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x20,
+ 0x80A7, 0},
+ /* Enable WUP Auto Fwd, Enable Wake on MDI, Wakeup Debouncer
+ * to 128 uS
+ */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x24,
+ 0xF110, 0},
+ /* Enable HW Init */
+ {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_SMI, 0x1A,
+ 0x0100, 0x0100},
+ };
+ int rc, i;
+
+ /* Start manual initialization procedures in Managed Mode */
+ rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
+ 0x1a, 0x0000, 0x0100);
+ if (rc < 0)
+ return rc;
+
+ /* Soft Reset the SMI block */
+ rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
+ 0x00, 0x8000, 0x8000);
+ if (rc < 0)
+ return rc;
+
+ /* Check to see if the self-clearing bit is cleared */
+ usleep_range(1000, 2000);
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
+ PHYACC_ATTR_BANK_SMI, 0x00, 0);
+ if (rc < 0)
+ return rc;
+ if ((rc & 0x8000) != 0)
+ return -ETIMEDOUT;
+
+ /* PHY Initialization */
+ for (i = 0; i < ARRAY_SIZE(init); i++) {
+ if (init[i].mode == PHYACC_ATTR_MODE_MODIFY) {
+ rc = access_ereg_modify_changed(phydev, init[i].bank,
+ init[i].offset,
+ init[i].val,
+ init[i].mask);
+ } else {
+ rc = access_ereg(phydev, init[i].mode, init[i].bank,
+ init[i].offset, init[i].val);
+ }
+ if (rc < 0)
+ return rc;
+ }
+
+ return 0;
+}
+
static int lan87xx_phy_config_intr(struct phy_device *phydev)
{
int rc, val = 0;
return rc < 0 ? rc : 0;
}
+static int lan87xx_config_init(struct phy_device *phydev)
+{
+ int rc = lan87xx_phy_init(phydev);
+
+ return rc < 0 ? rc : 0;
+}
+
static struct phy_driver microchip_t1_phy_driver[] = {
{
.phy_id = 0x0007c150,
.features = PHY_BASIC_T1_FEATURES,
+ .config_init = lan87xx_config_init,
.config_aneg = genphy_config_aneg,
.ack_interrupt = lan87xx_phy_ack_interrupt,
struct team_mode_item *mitem;
const struct team_mode *mode = NULL;
+ if (!try_module_get(THIS_MODULE))
+ return NULL;
+
spin_lock(&mode_list_lock);
mitem = __find_mode(kind);
if (!mitem) {
}
spin_unlock(&mode_list_lock);
+ module_put(THIS_MODULE);
return mode;
}
skb_reset_network_header(skb);
skb_probe_transport_header(skb);
+ skb_record_rx_queue(skb, tfile->queue_index);
if (skb_xdp) {
struct bpf_prog *xdp_prog;
skb->protocol = eth_type_trans(skb, tun->dev);
skb_reset_network_header(skb);
skb_probe_transport_header(skb);
+ skb_record_rx_queue(skb, tfile->queue_index);
if (skb_xdp) {
err = do_xdp_generic(xdp_prog, skb);
!tfile->detached)
rxhash = __skb_get_hash_symmetric(skb);
- skb_record_rx_queue(skb, tfile->queue_index);
netif_receive_skb(skb);
/* No need for get_cpu_ptr() here since this function is
fl6.flowi6_proto = iph->nexthdr;
fl6.flowi6_flags = FLOWI_FLAG_SKIP_NH_OIF;
- dst = ip6_route_output(net, NULL, &fl6);
- if (dst == dst_null)
+ dst = ip6_dst_lookup_flow(net, NULL, &fl6, NULL);
+ if (IS_ERR(dst) || dst == dst_null)
goto err;
skb_dst_drop(skb);
if (rt6_need_strict(&ipv6_hdr(skb)->daddr))
return skb;
- if (qdisc_tx_is_default(vrf_dev))
+ if (qdisc_tx_is_default(vrf_dev) ||
+ IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED)
return vrf_ip6_out_direct(vrf_dev, sk, skb);
return vrf_ip6_out_redirect(vrf_dev, skb);
ipv4_is_lbcast(ip_hdr(skb)->daddr))
return skb;
- if (qdisc_tx_is_default(vrf_dev))
+ if (qdisc_tx_is_default(vrf_dev) ||
+ IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED)
return vrf_ip_out_direct(vrf_dev, sk, skb);
return vrf_ip_out_redirect(vrf_dev, skb);
u32 id = nla_get_u32(data[IFLA_VXLAN_ID]);
if (id >= VXLAN_N_VID) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_VXLAN_ID],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VXLAN_ID],
"VXLAN ID must be lower than 16777216");
return -ERANGE;
}
= nla_data(data[IFLA_VXLAN_PORT_RANGE]);
if (ntohs(p->high) < ntohs(p->low)) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_VXLAN_PORT_RANGE],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VXLAN_PORT_RANGE],
"Invalid source port range");
return -EINVAL;
}
enum ifla_vxlan_df df = nla_get_u8(data[IFLA_VXLAN_DF]);
if (df < 0 || df > VXLAN_DF_MAX) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_VXLAN_DF],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VXLAN_DF],
"Invalid DF attribute");
return -EINVAL;
}
usb_autopm_put_interface(i2400mu->usb_iface);
d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %ld\n",
i2400m, ack, ack_size, (long) result);
+ usb_put_urb(¬if_urb);
return result;
error_exceeded:
return 0;
}
-static inline void ath11k_thermal_unregister(struct ath11k *ar)
+static inline void ath11k_thermal_unregister(struct ath11k_base *sc)
{
}
static inline int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
{
+ return 0;
}
static inline void ath11k_thermal_event_temperature(struct ath11k *ar,
return err;
}
+static netdev_tx_t brcmf_net_mon_start_xmit(struct sk_buff *skb,
+ struct net_device *ndev)
+{
+ dev_kfree_skb_any(skb);
+
+ return NETDEV_TX_OK;
+}
+
static const struct net_device_ops brcmf_netdev_ops_mon = {
.ndo_open = brcmf_net_mon_open,
.ndo_stop = brcmf_net_mon_stop,
+ .ndo_start_xmit = brcmf_net_mon_start_xmit,
};
int brcmf_net_mon_attach(struct brcmf_if *ifp)
}
static void *
-il3945_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+il3945_rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
}
static void *
-il4965_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+il4965_rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
cpu_to_le16(priv->lib->bt_params->agg_time_limit);
}
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+static void *rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
if (!prof->enabled) {
IWL_DEBUG_RADIO(fwrt, "SAR profile %d is disabled.\n",
profs[i]);
- /* if one of the profiles is disabled, we fail all */
- return -ENOENT;
+ /*
+ * if one of the profiles is disabled, we
+ * ignore all of them and return 1 to
+ * differentiate disabled from other failures.
+ */
+ return 1;
}
+
IWL_DEBUG_INFO(fwrt,
"SAR EWRD: chain %d profile index %d\n",
i, profs[i]);
* Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019 - 2020 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019 - 2020 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
IWL_MVM_DQA_MAX_MGMT_QUEUE = 8,
IWL_MVM_DQA_AP_PROBE_RESP_QUEUE = 9,
IWL_MVM_DQA_MIN_DATA_QUEUE = 10,
- IWL_MVM_DQA_MAX_DATA_QUEUE = 31,
+ IWL_MVM_DQA_MAX_DATA_QUEUE = 30,
};
enum iwl_mvm_tx_fifo {
kmemdup(pieces->dbg_conf_tlv[i],
pieces->dbg_conf_tlv_len[i],
GFP_KERNEL);
- if (!pieces->dbg_conf_tlv[i])
+ if (!drv->fw.dbg.conf_tlv[i])
goto out_free_fw;
}
}
IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
.mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
+ IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP,
.mac_cap_info[3] =
IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
.mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
+ IEEE80211_HE_MAC_CAP2_BSR,
.mac_cap_info[3] =
IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
struct iwl_dev_tx_power_cmd_v4 v4;
} cmd;
+ int ret;
u16 len = 0;
cmd.v5.v3.set_mode = cpu_to_le32(IWL_TX_POWER_MODE_SET_CHAINS);
len = sizeof(cmd.v4.v3);
- if (iwl_sar_select_profile(&mvm->fwrt, cmd.v5.v3.per_chain_restriction,
- prof_a, prof_b))
- return -ENOENT;
+ ret = iwl_sar_select_profile(&mvm->fwrt,
+ cmd.v5.v3.per_chain_restriction,
+ prof_a, prof_b);
+
+ /* return on error or if the profile is disabled (positive number) */
+ if (ret)
+ return ret;
+
IWL_DEBUG_RADIO(mvm, "Sending REDUCE_TX_POWER_CMD per chain\n");
return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, 0, len, &cmd);
}
"EWRD SAR BIOS table invalid or unavailable. (%d)\n",
ret);
- ret = iwl_mvm_sar_select_profile(mvm, 1, 1);
- /*
- * If we don't have profile 0 from BIOS, just skip it. This
- * means that SAR Geo will not be enabled either, even if we
- * have other valid profiles.
- */
- if (ret == -ENOENT)
- return 1;
-
- return ret;
+ return iwl_mvm_sar_select_profile(mvm, 1, 1);
}
static int iwl_mvm_load_rt_fw(struct iwl_mvm *mvm)
ret = iwl_mvm_sar_init(mvm);
if (ret == 0) {
ret = iwl_mvm_sar_geo_init(mvm);
- } else if (ret > 0 && !iwl_sar_get_wgds_table(&mvm->fwrt)) {
+ } else if (ret == -ENOENT && !iwl_sar_get_wgds_table(&mvm->fwrt)) {
/*
* If basic SAR is not available, we check for WGDS,
* which should *not* be available either. If it is
cpu_to_le16(iwl_mvm_coex_agg_time_limit(mvm, sta));
}
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+static void *rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2018 - 2020 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2018 - 2020 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
struct iwl_mvm_stat_data {
struct iwl_mvm *mvm;
+ __le32 flags;
__le32 mac_id;
u8 beacon_filter_average_energy;
void *general;
-general->beacon_average_energy[vif_id];
}
+ /* make sure that beacon statistics don't go backwards with TCM
+ * request to clear statistics
+ */
+ if (le32_to_cpu(data->flags) & IWL_STATISTICS_REPLY_FLG_CLEAR)
+ mvmvif->beacon_stats.accu_num_beacons +=
+ mvmvif->beacon_stats.num_beacons;
+
if (mvmvif->id != id)
return;
flags = stats->flag;
}
+ data.flags = flags;
iwl_mvm_rx_stats_check_trigger(mvm, pkt);
lockdep_assert_held(&mvm->mutex);
+ if (WARN(maxq >= mvm->trans->trans_cfg->base_params->num_of_queues,
+ "max queue %d >= num_of_queues (%d)", maxq,
+ mvm->trans->trans_cfg->base_params->num_of_queues))
+ maxq = mvm->trans->trans_cfg->base_params->num_of_queues - 1;
+
/* This should not be hit with new TX path */
if (WARN_ON(iwl_mvm_has_new_tx_api(mvm)))
return -ENOSPC;
inactive_tid_bitmap,
&unshare_queues,
&changetid_queues);
- if (ret >= 0 && free_queue < 0) {
+ if (ret && free_queue < 0) {
queue_owner = sta;
- free_queue = ret;
+ free_queue = i;
}
/* only unlock sta lock - we still need the queue info lock */
spin_unlock_bh(&mvmsta->lock);
int cmdq_size = max_t(u32, IWL_CMD_QUEUE_SIZE,
trans->cfg->min_txq_size);
+ switch (trans_pcie->rx_buf_size) {
+ case IWL_AMSDU_DEF:
+ return -EINVAL;
+ case IWL_AMSDU_2K:
+ break;
+ case IWL_AMSDU_4K:
+ case IWL_AMSDU_8K:
+ case IWL_AMSDU_12K:
+ control_flags |= IWL_PRPH_SCRATCH_RB_SIZE_4K;
+ break;
+ }
+
/* Allocate prph scratch */
prph_scratch = dma_alloc_coherent(trans->dev, sizeof(*prph_scratch),
&trans_pcie->prph_scratch_dma_addr,
cpu_to_le16((u16)iwl_read32(trans, CSR_HW_REV));
prph_sc_ctrl->version.size = cpu_to_le16(sizeof(*prph_scratch) / 4);
- control_flags = IWL_PRPH_SCRATCH_RB_SIZE_4K |
- IWL_PRPH_SCRATCH_MTR_MODE |
- (IWL_PRPH_MTR_FORMAT_256B &
- IWL_PRPH_SCRATCH_MTR_FORMAT);
+ control_flags |= IWL_PRPH_SCRATCH_MTR_MODE;
+ control_flags |= IWL_PRPH_MTR_FORMAT_256B & IWL_PRPH_SCRATCH_MTR_FORMAT;
/* initialize RX default queue */
prph_sc_ctrl->rbd_cfg.free_rbd_addr =
iwl_pcie_gen2_txq_unmap(trans, queue);
+ iwl_pcie_gen2_txq_free_memory(trans, trans_pcie->txq[queue]);
+ trans_pcie->txq[queue] = NULL;
+
IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", queue);
}
}
if (info->attrs[HWSIM_ATTR_RADIO_NAME]) {
- hwname = kasprintf(GFP_KERNEL, "%.*s",
- nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
- (char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]));
+ hwname = kstrndup((char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+ nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+ GFP_KERNEL);
if (!hwname)
return -ENOMEM;
param.hwname = hwname;
if (info->attrs[HWSIM_ATTR_RADIO_ID]) {
idx = nla_get_u32(info->attrs[HWSIM_ATTR_RADIO_ID]);
} else if (info->attrs[HWSIM_ATTR_RADIO_NAME]) {
- hwname = kasprintf(GFP_KERNEL, "%.*s",
- nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
- (char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]));
+ hwname = kstrndup((char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+ nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
+ GFP_KERNEL);
if (!hwname)
return -ENOMEM;
} else
}
vq = hwsim_vqs[HWSIM_VQ_RX];
sg_init_one(sg, skb->head, skb_end_offset(skb));
- err = virtqueue_add_inbuf(vq, sg, 1, skb, GFP_KERNEL);
+ err = virtqueue_add_inbuf(vq, sg, 1, skb, GFP_ATOMIC);
if (WARN(err, "virtqueue_add_inbuf returned %d\n", err))
nlmsg_free(skb);
else
{
}
-static void *rtl_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+static void *rtl_rate_alloc(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
return rtlpriv;
rtw_pci_link_cfg(rtwdev);
}
-#ifdef CONFIG_PM
-static int rtw_pci_suspend(struct device *dev)
+static int __maybe_unused rtw_pci_suspend(struct device *dev)
{
return 0;
}
-static int rtw_pci_resume(struct device *dev)
+static int __maybe_unused rtw_pci_resume(struct device *dev)
{
return 0;
}
static SIMPLE_DEV_PM_OPS(rtw_pm_ops, rtw_pci_suspend, rtw_pci_resume);
-#define RTW_PM_OPS (&rtw_pm_ops)
-#else
-#define RTW_PM_OPS NULL
-#endif
static int rtw_pci_claim(struct rtw_dev *rtwdev, struct pci_dev *pdev)
{
.id_table = rtw_pci_id_table,
.probe = rtw_pci_probe,
.remove = rtw_pci_remove,
- .driver.pm = RTW_PM_OPS,
+ .driver.pm = &rtw_pm_ops,
};
module_pci_driver(rtw_pci_driver);
of_property_set_flag(new_prop, OF_DYNAMIC);
+ kfree(target_path);
+
return new_prop;
err_free_new_prop:
/plugin/;
/*
- * &electric_1/motor-1 and &spin_ctrl_1 are the same node:
- * /testcase-data-2/substation@100/motor-1
+ * &electric_1/motor-1/electric and &spin_ctrl_1/electric are the same node:
+ * /testcase-data-2/substation@100/motor-1/electric
*
* Thus the property "rpm_avail" in each fragment will
* result in an attempt to update the same property twice.
* This will result in an error and the overlay apply
* will fail.
+ *
+ * The previous version of this test did not include the extra
+ * level of node 'electric'. That resulted in the 'rpm_avail'
+ * property being located in the pre-existing node 'motor-1'.
+ * Modifying a property results in a WARNING that a memory leak
+ * will occur if the overlay is removed. Since the overlay apply
+ * fails, the memory leak does actually occur, and kmemleak will
+ * further report the memory leak if CONFIG_DEBUG_KMEMLEAK is
+ * enabled. Adding the overlay node 'electric' avoids the
+ * memory leak and thus people who use kmemleak will not
+ * have to debug this non-problem again.
*/
&electric_1 {
motor-1 {
- rpm_avail = < 100 >;
+ electric {
+ rpm_avail = < 100 >;
+ };
};
};
&spin_ctrl_1 {
- rpm_avail = < 100 200 >;
+ electric {
+ rpm_avail = < 100 200 >;
+ };
};
unittest(!of_changeset_revert(&chgset), "revert failed\n");
of_changeset_destroy(&chgset);
+
+ of_node_put(n1);
+ of_node_put(n2);
+ of_node_put(n21);
#endif
}
of_platform_populate(np, match, NULL, &test_bus->dev);
for_each_child_of_node(np, child) {
- for_each_child_of_node(child, grandchild)
- unittest(of_find_device_by_node(grandchild),
+ for_each_child_of_node(child, grandchild) {
+ pdev = of_find_device_by_node(grandchild);
+ unittest(pdev,
"Could not create device for node '%pOFn'\n",
grandchild);
+ of_dev_put(pdev);
+ }
}
of_platform_depopulate(&test_bus->dev);
goto err_unlock;
}
if (__of_add_property(of_symbols, new_prop)) {
+ kfree(new_prop->name);
+ kfree(new_prop->value);
+ kfree(new_prop);
/* "name" auto-generated by unflatten */
- if (!strcmp(new_prop->name, "name"))
+ if (!strcmp(prop->name, "name"))
continue;
unittest(0, "duplicate property '%s' in overlay_base node __symbols__",
prop->name);
"OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller");
EXPECT_BEGIN(KERN_ERR,
- "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail");
+ "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric");
EXPECT_BEGIN(KERN_ERR,
- "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail");
+ "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail");
EXPECT_BEGIN(KERN_ERR,
- "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail");
+ "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name");
unittest(overlay_data_apply("overlay_bad_add_dup_prop", NULL),
"Adding overlay 'overlay_bad_add_dup_prop' failed\n");
EXPECT_END(KERN_ERR,
- "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail");
+ "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name");
EXPECT_END(KERN_ERR,
- "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail");
+ "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail");
EXPECT_END(KERN_ERR,
- "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail");
+ "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric");
unittest(overlay_data_apply("overlay_bad_phandle", NULL),
"Adding overlay 'overlay_bad_phandle' failed\n");
if (unlikely(!target_freq)) {
if (opp_table->required_opp_tables) {
ret = _set_required_opps(dev, opp_table, NULL);
+ } else if (!_get_opp_count(opp_table)) {
+ return 0;
} else {
dev_err(dev, "target frequency can't be 0\n");
ret = -EINVAL;
goto put_opp_table;
}
+ /*
+ * For IO devices which require an OPP on some platforms/SoCs
+ * while just needing to scale the clock on some others
+ * we look for empty OPP tables with just a clock handle and
+ * scale only the clk. This makes dev_pm_opp_set_rate()
+ * equivalent to a clk_set_rate()
+ */
+ if (!_get_opp_count(opp_table)) {
+ ret = _generic_set_opp_clk_only(dev, clk, freq);
+ goto put_opp_table;
+ }
+
temp_freq = old_freq;
old_opp = _find_freq_ceil(opp_table, &temp_freq);
if (IS_ERR(old_opp)) {
dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);
+
+static void apex_pci_fixup_class(struct pci_dev *pdev)
+{
+ pdev->class = (PCI_CLASS_SYSTEM_OTHER << 8) | pdev->class;
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
+ PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
# SPDX-License-Identifier: GPL-2.0-only
config PHY_TEGRA_XUSB
tristate "NVIDIA Tegra XUSB pad controller driver"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA && USB_SUPPORT
+ select USB_COMMON
select USB_CONN_GPIO
select USB_PHY
help
int id = sample->sensor_id;
struct iio_dev *indio_dev;
- if (id > sensorhub->sensor_num)
+ if (id >= sensorhub->sensor_num)
return -EINVAL;
cb = sensorhub->push_data[id].push_data_cb;
if (fifo_info->count > sensorhub->fifo_size ||
fifo_info->size != sensorhub->fifo_size) {
dev_warn(sensorhub->dev,
- "Mismatch EC data: count %d, size %d - expected %d",
+ "Mismatch EC data: count %d, size %d - expected %d\n",
fifo_info->count, fifo_info->size,
sensorhub->fifo_size);
goto error;
}
if (number_data > fifo_info->count - i) {
dev_warn(sensorhub->dev,
- "Invalid EC data: too many entry received: %d, expected %d",
+ "Invalid EC data: too many entry received: %d, expected %d\n",
number_data, fifo_info->count - i);
break;
}
if (out + number_data >
sensorhub->ring + fifo_info->count) {
dev_warn(sensorhub->dev,
- "Too many samples: %d (%zd data) to %d entries for expected %d entries",
+ "Too many samples: %d (%zd data) to %d entries for expected %d entries\n",
i, out - sensorhub->ring, i + number_data,
fifo_info->count);
break;
ines_write32(port, ts_stat_rx, ts_stat_rx);
ines_write32(port, ts_stat_tx, ts_stat_tx);
- port->rxts_enabled = ts_stat_rx == TS_ENABLE ? true : false;
- port->txts_enabled = ts_stat_tx == TS_ENABLE ? true : false;
+ port->rxts_enabled = ts_stat_rx == TS_ENABLE;
+ port->txts_enabled = ts_stat_tx == TS_ENABLE;
spin_unlock_irqrestore(&port->lock, flags);
wait_queue_head_t ack_wq;
void __iomem *cpu_addr;
- phys_addr_t phys_addr;
+ dma_addr_t dma_addr;
size_t dram_size;
struct rproc_subdev *rpmsg_subdev;
if (offset >= 0 && (offset + len) < scp->sram_size)
return (void __force *)scp->sram_base + offset;
} else {
- offset = da - scp->phys_addr;
+ offset = da - scp->dma_addr;
if (offset >= 0 && (offset + len) < scp->dram_size)
return (void __force *)scp->cpu_addr + offset;
}
/* Reserved SCP code size */
scp->dram_size = MAX_CODE_SIZE;
scp->cpu_addr = dma_alloc_coherent(scp->dev, scp->dram_size,
- &scp->phys_addr, GFP_KERNEL);
+ &scp->dma_addr, GFP_KERNEL);
if (!scp->cpu_addr)
return -ENOMEM;
static void scp_unmap_memory_region(struct mtk_scp *scp)
{
dma_free_coherent(scp->dev, scp->dram_size, scp->cpu_addr,
- scp->phys_addr);
+ scp->dma_addr);
of_reserved_mem_device_release(scp->dev);
}
}
return ret;
-};
+}
static void q6v5_pds_disable(struct q6v5 *qproc, struct device **pds,
size_t pd_count)
dev_pm_domain_detach(devs[i], false);
return ret;
-};
+}
static void q6v5_pds_detach(struct q6v5 *qproc, struct device **pds,
size_t pd_count)
ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name",
1, &qproc->hexagon_mdt_image);
if (ret < 0 && ret != -EINVAL)
- return ret;
+ goto free_rproc;
platform_set_drvdata(pdev, qproc);
qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12);
if (IS_ERR(qproc->sysmon)) {
ret = PTR_ERR(qproc->sysmon);
- goto detach_proxy_pds;
+ goto remove_subdevs;
}
ret = rproc_add(rproc);
if (ret)
- goto detach_proxy_pds;
+ goto remove_sysmon_subdev;
return 0;
-detach_proxy_pds:
+remove_sysmon_subdev:
+ qcom_remove_sysmon_subdev(qproc->sysmon);
+remove_subdevs:
qcom_remove_ipa_notify_subdev(qproc->rproc, &qproc->ipa_notify_subdev);
+ qcom_remove_ssr_subdev(rproc, &qproc->ssr_subdev);
+ qcom_remove_smd_subdev(rproc, &qproc->smd_subdev);
+ qcom_remove_glink_subdev(rproc, &qproc->glink_subdev);
+detach_proxy_pds:
q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
detach_active_pds:
q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
static int q6v5_remove(struct platform_device *pdev)
{
struct q6v5 *qproc = platform_get_drvdata(pdev);
+ struct rproc *rproc = qproc->rproc;
- rproc_del(qproc->rproc);
+ rproc_del(rproc);
qcom_remove_sysmon_subdev(qproc->sysmon);
- qcom_remove_ipa_notify_subdev(qproc->rproc, &qproc->ipa_notify_subdev);
- qcom_remove_glink_subdev(qproc->rproc, &qproc->glink_subdev);
- qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
- qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
+ qcom_remove_ipa_notify_subdev(rproc, &qproc->ipa_notify_subdev);
+ qcom_remove_ssr_subdev(rproc, &qproc->ssr_subdev);
+ qcom_remove_smd_subdev(rproc, &qproc->smd_subdev);
+ qcom_remove_glink_subdev(rproc, &qproc->glink_subdev);
- q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
+ q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
- rproc_free(qproc->rproc);
+ rproc_free(rproc);
return 0;
}
*/
#include <linux/remoteproc.h>
+#include <linux/slab.h>
#include "remoteproc_internal.h"
#include <linux/regmap.h>
#include <linux/remoteproc.h>
#include <linux/reset.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include "remoteproc_internal.h"
#include <linux/platform_device.h>
#include <linux/remoteproc.h>
#include <linux/rpmsg/mtk_rpmsg.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include "rpmsg_internal.h"
def_tristate y
prompt "Support for DASD devices"
depends on CCW && BLOCK
- select IOSCHED_DEADLINE
help
Enable this option if you want to access DASDs directly utilizing
S/390s channel subsystem commands. This is necessary for running
const struct dpaa2_fd *fd,
int nb)
{
- int i;
- struct qbman_eq_desc ed[32];
+ struct qbman_eq_desc *ed;
+ int i, ret;
+
+ ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
+ if (!ed)
+ return -ENOMEM;
d = service_select(d);
- if (!d)
- return -ENODEV;
+ if (!d) {
+ ret = -ENODEV;
+ goto out;
+ }
for (i = 0; i < nb; i++) {
qbman_eq_desc_clear(&ed[i]);
qbman_eq_desc_set_fq(&ed[i], fqid[i]);
}
- return qbman_swp_enqueue_multiple_desc(d->swp, &ed[0], fd, nb);
+ ret = qbman_swp_enqueue_multiple_desc(d->swp, &ed[0], fd, nb);
+out:
+ kfree(ed);
+ return ret;
}
EXPORT_SYMBOL(dpaa2_io_service_enqueue_multiple_desc_fq);
if (!s->eqcr.available) {
eqcr_ci = s->eqcr.ci;
p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
- s->eqcr.ci = __raw_readl(p) & full_mask;
+ s->eqcr.ci = *p & full_mask;
s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
eqcr_ci, s->eqcr.ci);
if (!s->eqcr.available) {
const uint32_t *cl;
uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
int i, num_enqueued = 0;
- uint64_t addr_cena;
half_mask = (s->eqcr.pi_ci_mask>>1);
full_mask = s->eqcr.pi_ci_mask;
/* Flush all the cacheline without load/store in between */
eqcr_pi = s->eqcr.pi;
- addr_cena = (uint64_t)s->addr_cena;
for (i = 0; i < num_enqueued; i++)
eqcr_pi++;
s->eqcr.pi = eqcr_pi & full_mask;
if (!s->eqcr.available) {
eqcr_ci = s->eqcr.ci;
p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
- s->eqcr.ci = __raw_readl(p) & full_mask;
+ s->eqcr.ci = *p & full_mask;
s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
eqcr_ci, s->eqcr.ci);
if (!s->eqcr.available)
bool "i.MX8M SoC family support"
depends on ARCH_MXC || COMPILE_TEST
default ARCH_MXC && ARM64
+ select SOC_BUS
help
If you say yes here you get support for the NXP i.MX8M family
support, it will provide the SoC info like SoC family,
config ZYNQMP_POWER
bool "Enable Xilinx Zynq MPSoC Power Management driver"
- depends on PM && ARCH_ZYNQMP
+ depends on PM && ZYNQMP_FIRMWARE
default y
select MAILBOX
select ZYNQMP_IPI_MBOX
config ZYNQMP_PM_DOMAINS
bool "Enable Zynq MPSoC generic PM domains"
default y
- depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
+ depends on PM && ZYNQMP_FIRMWARE
select PM_GENERIC_DOMAINS
help
Say yes to enable device power management through PM domains
}
cfp = kzalloc(sizeof(*cfp), GFP_KERNEL);
- if (!cfp)
+ if (!cfp) {
+ comedi_dev_put(dev);
return -ENOMEM;
+ }
cfp->dev = dev;
int ret;
for (i = 0; i < insn->n; i++) {
+ /* FIXME: lo bit 0 chooses voltage output or current output */
lo = ((data[i] & 0x0f) << 4) | (chan << 1) | 0x01;
hi = (data[i] & 0xff0) >> 4;
if (ret)
return ret;
+ outb(hi, dev->iobase + DT2815_DATA);
+
devpriv->ao_readback[chan] = data[i];
}
return i;
{ PCI_DEVICE(APEX_PCI_VENDOR_ID, APEX_PCI_DEVICE_ID) }, { 0 }
};
-static void apex_pci_fixup_class(struct pci_dev *pdev)
-{
- pdev->class = (PCI_CLASS_SYSTEM_OTHER << 8) | pdev->class;
-}
-DECLARE_PCI_FIXUP_CLASS_HEADER(APEX_PCI_VENDOR_ID, APEX_PCI_DEVICE_ID,
- PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
-
static int apex_pci_probe(struct pci_dev *pci_dev,
const struct pci_device_id *id)
{
}
mutex_lock(&mapping->mutex);
- for (i = 0; strcmp(attrs[i].attr.attr.name, GASKET_ARRAY_END_MARKER);
- i++) {
+ for (i = 0; attrs[i].attr.attr.name != NULL; i++) {
if (mapping->attribute_count == GASKET_SYSFS_MAX_NODES) {
dev_err(device,
"Maximum number of sysfs nodes reached for device\n");
*/
#define GASKET_SYSFS_MAX_NODES 196
-/* End markers for sysfs struct arrays. */
-#define GASKET_ARRAY_END_TOKEN GASKET_RESERVED_ARRAY_END
-#define GASKET_ARRAY_END_MARKER __stringify(GASKET_ARRAY_END_TOKEN)
-
/*
* Terminator struct for a gasket_sysfs_attr array. Must be at the end of
* all gasket_sysfs_attribute arrays.
case VNT_KEY_PAIRWISE:
key_mode |= mode;
key_inx = 4;
- /* Don't save entry for pairwise key for station mode */
- if (priv->op_mode == NL80211_IFTYPE_STATION)
- clear_bit(entry, &priv->key_entry_inuse);
break;
default:
return -EINVAL;
int vnt_set_keys(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
struct ieee80211_vif *vif, struct ieee80211_key_conf *key)
{
- struct ieee80211_bss_conf *conf = &vif->bss_conf;
struct vnt_private *priv = hw->priv;
u8 *mac_addr = NULL;
u8 key_dec_mode = 0;
return -EOPNOTSUPP;
}
- if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
vnt_set_keymode(hw, mac_addr, key, VNT_KEY_PAIRWISE,
key_dec_mode, true);
- } else {
- vnt_set_keymode(hw, mac_addr, key, VNT_KEY_DEFAULTKEY,
+ else
+ vnt_set_keymode(hw, mac_addr, key, VNT_KEY_GROUP_ADDRESS,
key_dec_mode, true);
- vnt_set_keymode(hw, (u8 *)conf->bssid, key,
- VNT_KEY_GROUP_ADDRESS, key_dec_mode, true);
- }
-
return 0;
}
priv->op_mode = vif->type;
- vnt_set_bss_mode(priv);
-
/* LED blink on TX */
vnt_mac_set_led(priv, LEDSTS_STS, LEDSTS_INTER);
priv->basic_rates = conf->basic_rates;
vnt_update_top_rates(priv);
- vnt_set_bss_mode(priv);
dev_dbg(&priv->usb->dev, "basic rates %x\n", conf->basic_rates);
}
priv->short_slot_time = false;
vnt_set_short_slot_time(priv);
- vnt_update_ifs(priv);
vnt_set_vga_gain_offset(priv, priv->bb_vga[0]);
vnt_update_pre_ed_threshold(priv, false);
}
+ if (changed & (BSS_CHANGED_BASIC_RATES | BSS_CHANGED_ERP_PREAMBLE |
+ BSS_CHANGED_ERP_SLOT))
+ vnt_set_bss_mode(priv);
+
if (changed & BSS_CHANGED_TXPOWER)
vnt_rf_setpower(priv, priv->current_rate,
conf->chandef.chan->hw_value);
vnt_mac_reg_bits_on(priv, MAC_REG_TFTCTL,
TFTCTL_TSFCNTREN);
- vnt_adjust_tsf(priv, conf->beacon_rate->hw_value,
- conf->sync_tsf, priv->current_tsf);
-
vnt_mac_set_beacon_interval(priv, conf->beacon_int);
vnt_reset_next_tbtt(priv, conf->beacon_int);
+
+ vnt_adjust_tsf(priv, conf->beacon_rate->hw_value,
+ conf->sync_tsf, priv->current_tsf);
+
+ vnt_update_next_tbtt(priv,
+ conf->sync_tsf, conf->beacon_int);
} else {
vnt_clear_current_tsf(priv);
{
struct vnt_private *priv = hw->priv;
u8 rx_mode = 0;
- int rc;
*total_flags &= FIF_ALLMULTI | FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC;
- rc = vnt_control_in(priv, MESSAGE_TYPE_READ, MAC_REG_RCR,
- MESSAGE_REQUEST_MACREG, sizeof(u8), &rx_mode);
-
- if (!rc)
- rx_mode = RCR_MULTICAST | RCR_BROADCAST;
+ vnt_control_in(priv, MESSAGE_TYPE_READ, MAC_REG_RCR,
+ MESSAGE_REQUEST_MACREG, sizeof(u8), &rx_mode);
dev_dbg(&priv->usb->dev, "rx mode in = %x\n", rx_mode);
case SET_KEY:
return vnt_set_keys(hw, sta, vif, key);
case DISABLE_KEY:
- if (test_bit(key->hw_key_idx, &priv->key_entry_inuse))
+ if (test_bit(key->hw_key_idx, &priv->key_entry_inuse)) {
clear_bit(key->hw_key_idx, &priv->key_entry_inuse);
+
+ vnt_mac_disable_keyentry(priv, key->hw_key_idx);
+ }
+
default:
break;
}
priv->wake_up_count =
priv->hw->conf.listen_interval;
- --priv->wake_up_count;
+ if (priv->wake_up_count)
+ --priv->wake_up_count;
/* Turn on wake up to listen next beacon */
if (priv->wake_up_count == 1)
config HVC_RISCV_SBI
bool "RISC-V SBI console support"
- depends on RISCV_SBI
+ depends on RISCV_SBI_V01
select HVC_DRIVER
help
This enables support for console output via RISC-V SBI calls, which
vtermnos[index] = vtermno;
cons_ops[index] = ops;
- /* reserve all indices up to and including this index */
- if (last_hvc < index)
- last_hvc = index;
-
/* check if we need to re-register the kernel console */
hvc_check_console(index);
cons_ops[i] == hp->ops)
break;
- /* no matching slot, just use a counter */
- if (i >= MAX_NR_HVC_CONSOLES)
- i = ++last_hvc;
+ if (i >= MAX_NR_HVC_CONSOLES) {
+
+ /* find 'empty' slot for console */
+ for (i = 0; i < MAX_NR_HVC_CONSOLES && vtermnos[i] != -1; i++) {
+ }
+
+ /* no matching slot, just use a counter */
+ if (i == MAX_NR_HVC_CONSOLES)
+ i = ++last_hvc + MAX_NR_HVC_CONSOLES;
+ }
hp->index = i;
- cons_ops[i] = ops;
- vtermnos[i] = vtermno;
+ if (i < MAX_NR_HVC_CONSOLES) {
+ cons_ops[i] = ops;
+ vtermnos[i] = vtermno;
+ }
list_add_tail(&(hp->next), &hvc_structs);
mutex_unlock(&hvc_structs_mutex);
tty_port_init(&info->port);
info->port.ops = &rocket_port_ops;
info->flags &= ~ROCKET_MODE_MASK;
- switch (pc104[board][line]) {
- case 422:
- info->flags |= ROCKET_MODE_RS422;
- break;
- case 485:
- info->flags |= ROCKET_MODE_RS485;
- break;
- case 232:
- default:
+ if (board < ARRAY_SIZE(pc104) && line < ARRAY_SIZE(pc104_1))
+ switch (pc104[board][line]) {
+ case 422:
+ info->flags |= ROCKET_MODE_RS422;
+ break;
+ case 485:
+ info->flags |= ROCKET_MODE_RS485;
+ break;
+ case 232:
+ default:
+ info->flags |= ROCKET_MODE_RS232;
+ break;
+ }
+ else
info->flags |= ROCKET_MODE_RS232;
- break;
- }
info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
config SERIAL_EARLYCON_RISCV_SBI
bool "Early console using RISC-V SBI"
- depends on RISCV_SBI
+ depends on RISCV_SBI_V01
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
if (IS_ERR(clk) && pdev->dev.of_node)
clk = of_clk_get(pdev->dev.of_node, 0);
- if (IS_ERR(clk))
+ if (IS_ERR(clk)) {
+ clk_put(clk);
return -ENODEV;
+ }
port->iotype = UPIO_MEM;
port->irq = res_irq->start;
return PTR_ERR(owl_port->clk);
}
+ ret = clk_prepare_enable(owl_port->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "could not enable clk\n");
+ return ret;
+ }
+
owl_port->port.dev = &pdev->dev;
owl_port->port.line = pdev->id;
owl_port->port.type = PORT_OWL;
uart_remove_one_port(&owl_uart_driver, &owl_port->port);
owl_uart_ports[pdev->id] = NULL;
+ clk_disable_unprepare(owl_port->clk);
return 0;
}
tty_insert_flip_char(tport, c, TTY_NORMAL);
} else {
for (i = 0; i < count; i++) {
- char c = serial_port_in(port, SCxRDR);
-
- status = serial_port_in(port, SCxSR);
+ char c;
+
+ if (port->type == PORT_SCIF ||
+ port->type == PORT_HSCIF) {
+ status = serial_port_in(port, SCxSR);
+ c = serial_port_in(port, SCxRDR);
+ } else {
+ c = serial_port_in(port, SCxRDR);
+ status = serial_port_in(port, SCxSR);
+ }
if (uart_handle_sysrq_char(port, c)) {
count--; i--;
continue;
sunserial_console_match(&sunhv_console, op->dev.of_node,
&sunhv_reg, port->line, false);
+ /* We need to initialize lock even for non-registered console */
+ spin_lock_init(&port->lock);
+
err = uart_add_one_port(&sunhv_reg, port);
if (err)
goto out_unregister_driver;
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
+#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
+#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
+#define CDNS_UART_NR_PORTS 16
#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
#define CDNS_UART_REGISTER_SPACE 0x1000
#define TX_TIMEOUT 500000
/* Rx Trigger level */
static int rx_trigger_level = 56;
-static int uartps_major;
module_param(rx_trigger_level, uint, 0444);
MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
* @pclk: APB clock
* @cdns_uart_driver: Pointer to UART driver
* @baud: Current baud rate
- * @id: Port ID
* @clk_rate_change_nb: Notifier block for clock changes
* @quirks: Flags for RXBS support.
*/
struct clk *pclk;
struct uart_driver *cdns_uart_driver;
unsigned int baud;
- int id;
struct notifier_block clk_rate_change_nb;
u32 quirks;
bool cts_override;
#endif
};
+static struct uart_driver cdns_uart_uart_driver;
+
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
* cdns_uart_console_putchar - write the character to the FIFO buffer
return uart_set_options(port, co, baud, parity, bits, flow);
}
+
+static struct console cdns_uart_console = {
+ .name = CDNS_UART_TTY_NAME,
+ .write = cdns_uart_console_write,
+ .device = uart_console_device,
+ .setup = cdns_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
+ .data = &cdns_uart_uart_driver,
+};
#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
#ifdef CONFIG_PM_SLEEP
};
MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
-/*
- * Maximum number of instances without alias IDs but if there is alias
- * which target "< MAX_UART_INSTANCES" range this ID can't be used.
- */
-#define MAX_UART_INSTANCES 32
-
-/* Stores static aliases list */
-static DECLARE_BITMAP(alias_bitmap, MAX_UART_INSTANCES);
-static int alias_bitmap_initialized;
-
-/* Stores actual bitmap of allocated IDs with alias IDs together */
-static DECLARE_BITMAP(bitmap, MAX_UART_INSTANCES);
-/* Protect bitmap operations to have unique IDs */
-static DEFINE_MUTEX(bitmap_lock);
-
-static int cdns_get_id(struct platform_device *pdev)
-{
- int id, ret;
-
- mutex_lock(&bitmap_lock);
-
- /* Alias list is stable that's why get alias bitmap only once */
- if (!alias_bitmap_initialized) {
- ret = of_alias_get_alias_list(cdns_uart_of_match, "serial",
- alias_bitmap, MAX_UART_INSTANCES);
- if (ret && ret != -EOVERFLOW) {
- mutex_unlock(&bitmap_lock);
- return ret;
- }
-
- alias_bitmap_initialized++;
- }
-
- /* Make sure that alias ID is not taken by instance without alias */
- bitmap_or(bitmap, bitmap, alias_bitmap, MAX_UART_INSTANCES);
-
- dev_dbg(&pdev->dev, "Alias bitmap: %*pb\n",
- MAX_UART_INSTANCES, bitmap);
-
- /* Look for a serialN alias */
- id = of_alias_get_id(pdev->dev.of_node, "serial");
- if (id < 0) {
- dev_warn(&pdev->dev,
- "No serial alias passed. Using the first free id\n");
-
- /*
- * Start with id 0 and check if there is no serial0 alias
- * which points to device which is compatible with this driver.
- * If alias exists then try next free position.
- */
- id = 0;
-
- for (;;) {
- dev_info(&pdev->dev, "Checking id %d\n", id);
- id = find_next_zero_bit(bitmap, MAX_UART_INSTANCES, id);
-
- /* No free empty instance */
- if (id == MAX_UART_INSTANCES) {
- dev_err(&pdev->dev, "No free ID\n");
- mutex_unlock(&bitmap_lock);
- return -EINVAL;
- }
-
- dev_dbg(&pdev->dev, "The empty id is %d\n", id);
- /* Check if ID is empty */
- if (!test_and_set_bit(id, bitmap)) {
- /* Break the loop if bit is taken */
- dev_dbg(&pdev->dev,
- "Selected ID %d allocation passed\n",
- id);
- break;
- }
- dev_dbg(&pdev->dev,
- "Selected ID %d allocation failed\n", id);
- /* if taking bit fails then try next one */
- id++;
- }
- }
-
- mutex_unlock(&bitmap_lock);
-
- return id;
-}
+/* Temporary variable for storing number of instances */
+static int instances;
/**
* cdns_uart_probe - Platform driver probe
*/
static int cdns_uart_probe(struct platform_device *pdev)
{
- int rc, irq;
+ int rc, id, irq;
struct uart_port *port;
struct resource *res;
struct cdns_uart *cdns_uart_data;
const struct of_device_id *match;
- struct uart_driver *cdns_uart_uart_driver;
- char *driver_name;
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- struct console *cdns_uart_console;
-#endif
cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
GFP_KERNEL);
if (!port)
return -ENOMEM;
- cdns_uart_uart_driver = devm_kzalloc(&pdev->dev,
- sizeof(*cdns_uart_uart_driver),
- GFP_KERNEL);
- if (!cdns_uart_uart_driver)
- return -ENOMEM;
-
- cdns_uart_data->id = cdns_get_id(pdev);
- if (cdns_uart_data->id < 0)
- return cdns_uart_data->id;
+ /* Look for a serialN alias */
+ id = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (id < 0)
+ id = 0;
- /* There is a need to use unique driver name */
- driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
- CDNS_UART_NAME, cdns_uart_data->id);
- if (!driver_name) {
- rc = -ENOMEM;
- goto err_out_id;
+ if (id >= CDNS_UART_NR_PORTS) {
+ dev_err(&pdev->dev, "Cannot get uart_port structure\n");
+ return -ENODEV;
}
- cdns_uart_uart_driver->owner = THIS_MODULE;
- cdns_uart_uart_driver->driver_name = driver_name;
- cdns_uart_uart_driver->dev_name = CDNS_UART_TTY_NAME;
- cdns_uart_uart_driver->major = uartps_major;
- cdns_uart_uart_driver->minor = cdns_uart_data->id;
- cdns_uart_uart_driver->nr = 1;
-
+ if (!cdns_uart_uart_driver.state) {
+ cdns_uart_uart_driver.owner = THIS_MODULE;
+ cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
+ cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
+ cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
+ cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
+ cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- cdns_uart_console = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_console),
- GFP_KERNEL);
- if (!cdns_uart_console) {
- rc = -ENOMEM;
- goto err_out_id;
- }
-
- strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
- sizeof(cdns_uart_console->name));
- cdns_uart_console->index = cdns_uart_data->id;
- cdns_uart_console->write = cdns_uart_console_write;
- cdns_uart_console->device = uart_console_device;
- cdns_uart_console->setup = cdns_uart_console_setup;
- cdns_uart_console->flags = CON_PRINTBUFFER;
- cdns_uart_console->data = cdns_uart_uart_driver;
- cdns_uart_uart_driver->cons = cdns_uart_console;
+ cdns_uart_uart_driver.cons = &cdns_uart_console;
#endif
- rc = uart_register_driver(cdns_uart_uart_driver);
- if (rc < 0) {
- dev_err(&pdev->dev, "Failed to register driver\n");
- goto err_out_id;
+ rc = uart_register_driver(&cdns_uart_uart_driver);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Failed to register driver\n");
+ return rc;
+ }
}
- cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
-
- /*
- * Setting up proper name_base needs to be done after uart
- * registration because tty_driver structure is not filled.
- * name_base is 0 by default.
- */
- cdns_uart_uart_driver->tty_driver->name_base = cdns_uart_data->id;
+ cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
if (match && match->data) {
port->ops = &cdns_uart_ops;
port->fifosize = CDNS_UART_FIFO_SIZE;
port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE);
+ port->line = id;
/*
* Register the port.
console_port = port;
#endif
- rc = uart_add_one_port(cdns_uart_uart_driver, port);
+ rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/* This is not port which is used for console that's why clean it up */
if (console_port == port &&
- !(cdns_uart_uart_driver->cons->flags & CON_ENABLED))
+ !(cdns_uart_uart_driver.cons->flags & CON_ENABLED))
console_port = NULL;
#endif
- uartps_major = cdns_uart_uart_driver->tty_driver->major;
cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
"cts-override");
+
+ instances++;
+
return 0;
err_out_pm_disable:
err_out_clk_dis_pclk:
clk_disable_unprepare(cdns_uart_data->pclk);
err_out_unregister_driver:
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
-err_out_id:
- mutex_lock(&bitmap_lock);
- if (cdns_uart_data->id < MAX_UART_INSTANCES)
- clear_bit(cdns_uart_data->id, bitmap);
- mutex_unlock(&bitmap_lock);
+ if (!instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
#endif
rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
port->mapbase = 0;
- mutex_lock(&bitmap_lock);
- if (cdns_uart_data->id < MAX_UART_INSTANCES)
- clear_bit(cdns_uart_data->id, bitmap);
- mutex_unlock(&bitmap_lock);
clk_disable_unprepare(cdns_uart_data->uartclk);
clk_disable_unprepare(cdns_uart_data->pclk);
pm_runtime_disable(&pdev->dev);
console_port = NULL;
#endif
- /* If this is last instance major number should be initialized */
- mutex_lock(&bitmap_lock);
- if (bitmap_empty(bitmap, MAX_UART_INSTANCES))
- uartps_major = 0;
- mutex_unlock(&bitmap_lock);
-
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
+ if (!--instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
return 1;
return sysrq_enabled;
}
+EXPORT_SYMBOL_GPL(sysrq_mask);
/*
* A value of 1 means 'all', other nonzero values are an op mask:
return 0;
}
+EXPORT_SYMBOL_GPL(sysrq_toggle_support);
static int __sysrq_swap_key_ops(int key, struct sysrq_key_op *insert_op_p,
struct sysrq_key_op *remove_op_p)
#include <linux/errno.h>
#include <linux/kd.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <linux/major.h>
#include <linux/mm.h>
#include <linux/console.h>
/* allocate everything in one go */
memsize = cols * rows * sizeof(char32_t);
memsize += rows * sizeof(char32_t *);
- p = kmalloc(memsize, GFP_KERNEL);
+ p = vmalloc(memsize);
if (!p)
return NULL;
static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr)
{
- kfree(vc->vc_uni_screen);
+ vfree(vc->vc_uni_screen);
vc->vc_uni_screen = new_uniscr;
}
if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
return 0;
- if (new_screen_size > (4 << 20))
+ if (new_screen_size > KMALLOC_MAX_SIZE)
return -EINVAL;
newscreen = kzalloc(new_screen_size, GFP_USER);
if (!newscreen)
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval && retval != -EPERM)
+ if (retval && retval != -EPERM && retval != -ENODEV)
dev_err(&acm->control->dev,
"%s - usb_submit_urb failed: %d\n", __func__, retval);
+ else
+ dev_vdbg(&acm->control->dev,
+ "control resubmission terminated %d\n", retval);
}
static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
dev_err(&acm->data->dev,
"urb %d failed submission with %d\n",
index, res);
+ } else {
+ dev_vdbg(&acm->data->dev, "intended failure %d\n", res);
}
set_bit(index, &acm->read_urbs_free);
return res;
int status = urb->status;
bool stopped = false;
bool stalled = false;
+ bool cooldown = false;
dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
rb->index, urb->actual_length, status);
__func__, status);
stopped = true;
break;
+ case -EOVERFLOW:
+ case -EPROTO:
+ dev_dbg(&acm->data->dev,
+ "%s - cooling babbling device\n", __func__);
+ usb_mark_last_busy(acm->dev);
+ set_bit(rb->index, &acm->urbs_in_error_delay);
+ cooldown = true;
+ break;
default:
dev_dbg(&acm->data->dev,
"%s - nonzero urb status received: %d\n",
*/
smp_mb__after_atomic();
- if (stopped || stalled) {
+ if (stopped || stalled || cooldown) {
if (stalled)
schedule_work(&acm->work);
+ else if (cooldown)
+ schedule_delayed_work(&acm->dwork, HZ / 2);
return;
}
struct acm *acm = container_of(work, struct acm, work);
if (test_bit(EVENT_RX_STALL, &acm->flags)) {
- if (!(usb_autopm_get_interface(acm->data))) {
+ smp_mb(); /* against acm_suspend() */
+ if (!acm->susp_count) {
for (i = 0; i < acm->rx_buflimit; i++)
usb_kill_urb(acm->read_urbs[i]);
usb_clear_halt(acm->dev, acm->in);
acm_submit_read_urbs(acm, GFP_KERNEL);
- usb_autopm_put_interface(acm->data);
+ clear_bit(EVENT_RX_STALL, &acm->flags);
}
- clear_bit(EVENT_RX_STALL, &acm->flags);
+ }
+
+ if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
+ for (i = 0; i < ACM_NR; i++)
+ if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
+ acm_submit_read_urb(acm, i, GFP_NOIO);
}
if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
acm->readsize = readsize;
acm->rx_buflimit = num_rx_buf;
INIT_WORK(&acm->work, acm_softint);
+ INIT_DELAYED_WORK(&acm->dwork, acm_softint);
init_waitqueue_head(&acm->wioctl);
spin_lock_init(&acm->write_lock);
spin_lock_init(&acm->read_lock);
acm_kill_urbs(acm);
cancel_work_sync(&acm->work);
+ cancel_delayed_work_sync(&acm->dwork);
tty_unregister_device(acm_tty_driver, acm->minor);
acm_kill_urbs(acm);
cancel_work_sync(&acm->work);
+ cancel_delayed_work_sync(&acm->dwork);
+ acm->urbs_in_error_delay = 0;
return 0;
}
# define EVENT_TTY_WAKEUP 0
# define EVENT_RX_STALL 1
# define ACM_THROTTLED 2
+# define ACM_ERROR_DELAY 3
+ unsigned long urbs_in_error_delay; /* these need to be restarted after a delay */
struct usb_cdc_line_coding line; /* bits, stop, parity */
- struct work_struct work; /* work queue entry for line discipline waking up */
+ struct work_struct work; /* work queue entry for various purposes*/
+ struct delayed_work dwork; /* for cool downs needed in error recovery */
unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */
unsigned int ctrlout; /* output control lines (DTR, RTS) */
struct async_icount iocount; /* counters for control line changes */
#ifdef CONFIG_PM
udev->reset_resume = 1;
#endif
+ /* Don't set the change_bits when the device
+ * was powered off.
+ */
+ if (test_bit(port1, hub->power_bits))
+ set_bit(port1, hub->change_bits);
} else {
/* The power session is gone; tell hub_wq */
{
int old_scheme_first_port =
port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME;
- int quick_enumeration = (udev->speed == USB_SPEED_HIGH);
if (udev->speed >= USB_SPEED_SUPER)
return false;
- return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first
- || quick_enumeration);
+ return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first);
}
/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
if (portchange & USB_PORT_STAT_C_ENABLE)
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
+
+ /*
+ * Whatever made this reset-resume necessary may have
+ * turned on the port1 bit in hub->change_bits. But after
+ * a successful reset-resume we want the bit to be clear;
+ * if it was on it would indicate that something happened
+ * following the reset-resume.
+ */
+ clear_bit(port1, hub->change_bits);
}
return status;
int i, retval;
spin_lock_irqsave(&io->lock, flags);
- if (io->status) {
+ if (io->status || io->count == 0) {
spin_unlock_irqrestore(&io->lock, flags);
return;
}
/* shut everything down */
io->status = -ECONNRESET;
+ io->count++; /* Keep the request alive until we're done */
spin_unlock_irqrestore(&io->lock, flags);
for (i = io->entries - 1; i >= 0; --i) {
dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
__func__, retval);
}
+
+ spin_lock_irqsave(&io->lock, flags);
+ io->count--;
+ if (!io->count)
+ complete(&io->complete);
+ spin_unlock_irqrestore(&io->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_sg_cancel);
/* Corsair K70 LUX */
{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
+ /* Corsair K70 RGB RAPDIFIRE */
+ { USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT |
+ USB_QUIRK_DELAY_CTRL_MSG },
+
/* MIDI keyboard WORLDE MINI */
{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Global TX Fifo Size Register */
#define DWC31_GTXFIFOSIZ_TXFRAMNUM BIT(15) /* DWC_usb31 only */
-#define DWC31_GTXFIFOSIZ_TXFDEF(n) ((n) & 0x7fff) /* DWC_usb31 only */
-#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
+#define DWC31_GTXFIFOSIZ_TXFDEP(n) ((n) & 0x7fff) /* DWC_usb31 only */
+#define DWC3_GTXFIFOSIZ_TXFDEP(n) ((n) & 0xffff)
#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
+/* Global RX Fifo Size Register */
+#define DWC31_GRXFIFOSIZ_RXFDEP(n) ((n) & 0x7fff) /* DWC_usb31 only */
+#define DWC3_GRXFIFOSIZ_RXFDEP(n) ((n) & 0xffff)
+
/* Global Event Size Registers */
#define DWC3_GEVNTSIZ_INTMASK BIT(31)
#define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff)
u32 reg;
u8 link_state;
- u8 speed;
/*
* According to the Databook Remote wakeup request should
*/
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
- speed = reg & DWC3_DSTS_CONNECTSPD;
- if ((speed == DWC3_DSTS_SUPERSPEED) ||
- (speed == DWC3_DSTS_SUPERSPEED_PLUS))
- return 0;
-
link_state = DWC3_DSTS_USBLNKST(reg);
switch (link_state) {
+ case DWC3_LINK_STATE_RESET:
case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */
case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */
+ case DWC3_LINK_STATE_RESUME:
break;
default:
return -EINVAL;
{
struct dwc3 *dwc = dep->dwc;
int mdwidth;
- int kbytes;
int size;
mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1));
if (dwc3_is_usb31(dwc))
- size = DWC31_GTXFIFOSIZ_TXFDEF(size);
+ size = DWC31_GTXFIFOSIZ_TXFDEP(size);
else
- size = DWC3_GTXFIFOSIZ_TXFDEF(size);
+ size = DWC3_GTXFIFOSIZ_TXFDEP(size);
/* FIFO Depth is in MDWDITH bytes. Multiply */
size *= mdwidth;
- kbytes = size / 1024;
- if (kbytes == 0)
- kbytes = 1;
-
/*
- * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for
- * internal overhead. We don't really know how these are used,
- * but documentation say it exists.
+ * To meet performance requirement, a minimum TxFIFO size of 3x
+ * MaxPacketSize is recommended for endpoints that support burst and a
+ * minimum TxFIFO size of 2x MaxPacketSize for endpoints that don't
+ * support burst. Use those numbers and we can calculate the max packet
+ * limit as below.
*/
- size -= mdwidth * (kbytes + 1);
- size /= kbytes;
+ if (dwc->maximum_speed >= USB_SPEED_SUPER)
+ size /= 3;
+ else
+ size /= 2;
usb_ep_set_maxpacket_limit(&dep->endpoint, size);
static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep)
{
struct dwc3 *dwc = dep->dwc;
+ int mdwidth;
+ int size;
+
+ mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
- usb_ep_set_maxpacket_limit(&dep->endpoint, 1024);
+ /* MDWIDTH is represented in bits, convert to bytes */
+ mdwidth /= 8;
+
+ /* All OUT endpoints share a single RxFIFO space */
+ size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0));
+ if (dwc3_is_usb31(dwc))
+ size = DWC31_GRXFIFOSIZ_RXFDEP(size);
+ else
+ size = DWC3_GRXFIFOSIZ_RXFDEP(size);
+
+ /* FIFO depth is in MDWDITH bytes */
+ size *= mdwidth;
+
+ /*
+ * To meet performance requirement, a minimum recommended RxFIFO size
+ * is defined as follow:
+ * RxFIFO size >= (3 x MaxPacketSize) +
+ * (3 x 8 bytes setup packets size) + (16 bytes clock crossing margin)
+ *
+ * Then calculate the max packet limit as below.
+ */
+ size -= (3 * 8) + 16;
+ if (size < 0)
+ size = 0;
+ else
+ size /= 3;
+
+ usb_ep_set_maxpacket_limit(&dep->endpoint, size);
dep->endpoint.max_streams = 15;
dep->endpoint.ops = &dwc3_gadget_ep_ops;
list_add_tail(&dep->endpoint.ep_list,
static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
{
- /*
- * For OUT direction, host may send less than the setup
- * length. Return true for all OUT requests.
- */
- if (!req->direction)
- return true;
-
- return req->request.actual == req->request.length;
+ return req->num_pending_sgs == 0;
}
static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
req->request.actual = req->request.length - req->remaining;
- if (!dwc3_gadget_ep_request_completed(req) ||
- req->num_pending_sgs) {
+ if (!dwc3_gadget_ep_request_completed(req)) {
__dwc3_gadget_kick_transfer(dep);
goto out;
}
case COMP_USB_TRANSACTION_ERROR:
case COMP_STALL_ERROR:
default:
- if (ep_id == XDBC_EPID_OUT)
+ if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL)
xdbc.flags |= XDBC_FLAGS_OUT_STALL;
- if (ep_id == XDBC_EPID_IN)
+ if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL)
xdbc.flags |= XDBC_FLAGS_IN_STALL;
xdbc_trace("endpoint %d stalled\n", ep_id);
break;
}
- if (ep_id == XDBC_EPID_IN) {
+ if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL) {
xdbc.flags &= ~XDBC_FLAGS_IN_PROCESS;
xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
- } else if (ep_id == XDBC_EPID_OUT) {
+ } else if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL) {
xdbc.flags &= ~XDBC_FLAGS_OUT_PROCESS;
} else {
xdbc_trace("invalid endpoint id %d\n", ep_id);
u32 cycle_state;
};
-#define XDBC_EPID_OUT 2
-#define XDBC_EPID_IN 3
+/*
+ * These are the "Endpoint ID" (also known as "Context Index") values for the
+ * OUT Transfer Ring and the IN Transfer Ring of a Debug Capability Context data
+ * structure.
+ * According to the "eXtensible Host Controller Interface for Universal Serial
+ * Bus (xHCI)" specification, section "7.6.3.2 Endpoint Contexts and Transfer
+ * Rings", these should be 0 and 1, and those are the values AMD machines give
+ * you; but Intel machines seem to use the formula from section "4.5.1 Device
+ * Context Index", which is supposed to be used for the Device Context only.
+ * Luckily the values from Intel don't overlap with those from AMD, so we can
+ * just test for both.
+ */
+#define XDBC_EPID_OUT 0
+#define XDBC_EPID_IN 1
+#define XDBC_EPID_OUT_INTEL 2
+#define XDBC_EPID_IN_INTEL 3
struct xdbc_state {
u16 vendor;
ffs->state = FFS_READ_DESCRIPTORS;
ffs->setup_state = FFS_NO_SETUP;
ffs->flags = 0;
+
+ ffs->ms_os_descs_ext_prop_count = 0;
+ ffs->ms_os_descs_ext_prop_name_len = 0;
+ ffs->ms_os_descs_ext_prop_data_len = 0;
}
static struct usb_raw_event *raw_event_queue_fetch(
struct raw_event_queue *queue)
{
+ int ret;
unsigned long flags;
struct usb_raw_event *event;
* there's at least one event queued by decrementing the semaphore,
* and then take the lock to protect queue struct fields.
*/
- if (down_interruptible(&queue->sema))
- return NULL;
+ ret = down_interruptible(&queue->sema);
+ if (ret)
+ return ERR_PTR(ret);
spin_lock_irqsave(&queue->lock, flags);
- if (WARN_ON(!queue->size))
- return NULL;
+ /*
+ * queue->size must have the same value as queue->sema counter (before
+ * the down_interruptible() call above), so this check is a fail-safe.
+ */
+ if (WARN_ON(!queue->size)) {
+ spin_unlock_irqrestore(&queue->lock, flags);
+ return ERR_PTR(-ENODEV);
+ }
event = queue->events[0];
queue->size--;
memmove(&queue->events[0], &queue->events[1],
char *udc_device_name;
unsigned long flags;
- ret = copy_from_user(&arg, (void __user *)value, sizeof(arg));
- if (ret)
- return ret;
+ if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
+ return -EFAULT;
switch (arg.speed) {
case USB_SPEED_UNKNOWN:
static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
{
- int ret = 0;
struct usb_raw_event arg;
unsigned long flags;
struct usb_raw_event *event;
uint32_t length;
- ret = copy_from_user(&arg, (void __user *)value, sizeof(arg));
- if (ret)
- return ret;
+ if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
+ return -EFAULT;
spin_lock_irqsave(&dev->lock, flags);
if (dev->state != STATE_DEV_RUNNING) {
spin_unlock_irqrestore(&dev->lock, flags);
event = raw_event_queue_fetch(&dev->queue);
- if (!event) {
+ if (PTR_ERR(event) == -EINTR) {
dev_dbg(&dev->gadget->dev, "event fetching interrupted\n");
return -EINTR;
}
+ if (IS_ERR(event)) {
+ dev_err(&dev->gadget->dev, "failed to fetch event\n");
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->state = STATE_DEV_FAILED;
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return -ENODEV;
+ }
length = min(arg.length, event->length);
- ret = copy_to_user((void __user *)value, event,
- sizeof(*event) + length);
- return ret;
+ if (copy_to_user((void __user *)value, event, sizeof(*event) + length))
+ return -EFAULT;
+
+ return 0;
}
static void *raw_alloc_io_data(struct usb_raw_ep_io *io, void __user *ptr,
bool get_from_user)
{
- int ret;
void *data;
- ret = copy_from_user(io, ptr, sizeof(*io));
- if (ret)
- return ERR_PTR(ret);
+ if (copy_from_user(io, ptr, sizeof(*io)))
+ return ERR_PTR(-EFAULT);
if (io->ep >= USB_RAW_MAX_ENDPOINTS)
return ERR_PTR(-EINVAL);
if (!usb_raw_io_flags_valid(io->flags))
if (IS_ERR(data))
return PTR_ERR(data);
ret = raw_process_ep0_io(dev, &io, data, false);
- if (ret < 0) {
- kfree(data);
- return ret;
- }
+ if (ret)
+ goto free;
+
length = min(io.length, (unsigned int)ret);
- ret = copy_to_user((void __user *)(value + sizeof(io)), data, length);
+ if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
+ ret = -EFAULT;
+free:
kfree(data);
return ret;
}
if (IS_ERR(data))
return PTR_ERR(data);
ret = raw_process_ep_io(dev, &io, data, false);
- if (ret < 0) {
- kfree(data);
- return ret;
- }
+ if (ret)
+ goto free;
+
length = min(io.length, (unsigned int)ret);
- ret = copy_to_user((void __user *)(value + sizeof(io)), data, length);
+ if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
+ ret = -EFAULT;
+free:
kfree(data);
return ret;
}
usba_start(udc);
} else {
udc->suspended = false;
- usba_stop(udc);
-
if (udc->driver->disconnect)
udc->driver->disconnect(&udc->gadget);
+
+ usba_stop(udc);
}
udc->vbus_prev = vbus;
}
{
struct bdc *bdc = ep->bdc;
- if (req == NULL || &req->queue == NULL || &req->usb_req == NULL)
+ if (req == NULL)
return;
dev_dbg(bdc->dev, "%s ep:%s status:%d\n", __func__, ep->name, status);
}
if ((temp & PORT_RC))
reset_change = true;
+ if (temp & PORT_OC)
+ status = 1;
}
if (!status && !reset_change) {
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
port_index);
goto retry;
}
+ /* bail out if port detected a over-current condition */
+ if (t1 & PORT_OC) {
+ bus_state->bus_suspended = 0;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");
+ return -EBUSY;
+ }
/* suspend ports in U0, or bail out for new connect changes */
if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
if ((t1 & PORT_CSC) && wake_enabled) {
stream_id);
return;
}
+ /*
+ * A cancelled TD can complete with a stall if HW cached the trb.
+ * In this case driver can't find cur_td, but if the ring is empty we
+ * can move the dequeue pointer to the current enqueue position.
+ */
+ if (!cur_td) {
+ if (list_empty(&ep_ring->td_list)) {
+ state->new_deq_seg = ep_ring->enq_seg;
+ state->new_deq_ptr = ep_ring->enqueue;
+ state->new_cycle_state = ep_ring->cycle_state;
+ goto done;
+ } else {
+ xhci_warn(xhci, "Can't find new dequeue state, missing cur_td\n");
+ return;
+ }
+ }
+
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding endpoint context");
state->new_deq_seg = new_seg;
state->new_deq_ptr = new_deq;
+done:
/* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Cycle state = 0x%x", state->new_cycle_state);
if (reset_type == EP_HARD_RESET) {
ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
- xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td);
- xhci_clear_hub_tt_buffer(xhci, td, ep);
+ xhci_cleanup_stalled_ring(xhci, slot_id, ep_index, stream_id,
+ td);
}
xhci_ring_cmd_db(xhci);
}
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
- /* Issue a reset endpoint command to clear the host side
- * halt, followed by a set dequeue command to move the
- * dequeue pointer past the TD.
- * The class driver clears the device side halt later.
+ /*
+ * xhci internal endpoint state will go to a "halt" state for
+ * any stall, including default control pipe protocol stall.
+ * To clear the host side halt we need to issue a reset endpoint
+ * command, followed by a set dequeue command to move past the
+ * TD.
+ * Class drivers clear the device side halt from a functional
+ * stall later. Hub TT buffer should only be cleared for FS/LS
+ * devices behind HS hubs for functional stalls.
*/
+ if ((ep_index != 0) || (trb_comp_code != COMP_STALL_ERROR))
+ xhci_clear_hub_tt_buffer(xhci, td, ep);
xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
ep_ring->stream_id, td, EP_HARD_RESET);
} else {
xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
slot_id, ep_index);
}
+ if (trb_comp_code == COMP_STALL_ERROR ||
+ xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code)) {
+ xhci_cleanup_halted_endpoint(xhci, slot_id,
+ ep_index,
+ ep_ring->stream_id,
+ NULL,
+ EP_HARD_RESET);
+ }
goto cleanup;
}
added_ctxs, added_ctxs);
}
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
- unsigned int stream_id, struct xhci_td *td)
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, unsigned int stream_id,
+ struct xhci_td *td)
{
struct xhci_dequeue_state deq_state;
- struct usb_device *udev = td->urb->dev;
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Cleaning up stalled endpoint ring");
/* We need to move the HW's dequeue pointer past this TD,
* or it will attempt to resend it on the next doorbell ring.
*/
- xhci_find_new_dequeue_state(xhci, udev->slot_id,
- ep_index, stream_id, td, &deq_state);
+ xhci_find_new_dequeue_state(xhci, slot_id, ep_index, stream_id, td,
+ &deq_state);
if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg)
return;
if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Queueing new dequeue state");
- xhci_queue_new_dequeue_state(xhci, udev->slot_id,
+ xhci_queue_new_dequeue_state(xhci, slot_id,
ep_index, &deq_state);
} else {
/* Better hope no one uses the input context between now and the
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Setting up input context for "
"configure endpoint command");
- xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+ xhci_setup_input_ctx_for_quirk(xhci, slot_id,
ep_index, &deq_state);
}
}
void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state);
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
- unsigned int stream_id, struct xhci_td *td);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, unsigned int stream_id,
+ struct xhci_td *td);
void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
void xhci_handle_command_timeout(struct work_struct *work);
/* High level: Gfx (indexed) register access */
#ifdef CONFIG_USB_SISUSBVGA_CON
-int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data)
+int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data)
{
return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
}
-int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data)
+int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 *data)
{
return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
}
#endif
-int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 data)
{
int ret;
return ret;
}
-int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 *data)
{
int ret;
return ret;
}
-int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx,
+int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port, u8 idx,
u8 myand, u8 myor)
{
int ret;
}
static int sisusb_setidxregmask(struct sisusb_usb_data *sisusb,
- int port, u8 idx, u8 data, u8 mask)
+ u32 port, u8 idx, u8 data, u8 mask)
{
int ret;
u8 tmp;
return ret;
}
-int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 myor)
{
return sisusb_setidxregandor(sisusb, port, index, 0xff, myor);
}
-int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
u8 idx, u8 myand)
{
return sisusb_setidxregandor(sisusb, port, idx, myand, 0x00);
static int sisusb_handle_command(struct sisusb_usb_data *sisusb,
struct sisusb_command *y, unsigned long arg)
{
- int retval, port, length;
- u32 address;
+ int retval, length;
+ u32 port, address;
/* All our commands require the device
* to be initialized.
int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
-extern int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
-extern int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 * data);
-extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data);
+extern int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 * data);
+extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 data);
-extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 * data);
-extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port,
u8 idx, u8 myand, u8 myor);
-extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 myor);
-extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
u8 idx, u8 myand);
void sisusb_delete(struct kref *kref);
static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
int status);
+/*
+ * This driver needs its own workqueue, as we need to control memory allocation.
+ *
+ * In the course of error handling and power management uas_wait_for_pending_cmnds()
+ * needs to flush pending work items. In these contexts we cannot allocate memory
+ * by doing block IO as we would deadlock. For the same reason we cannot wait
+ * for anything allocating memory not heeding these constraints.
+ *
+ * So we have to control all work items that can be on the workqueue we flush.
+ * Hence we cannot share a queue and need our own.
+ */
+static struct workqueue_struct *workqueue;
+
static void uas_do_work(struct work_struct *work)
{
struct uas_dev_info *devinfo =
if (!err)
cmdinfo->state &= ~IS_IN_WORK_LIST;
else
- schedule_work(&devinfo->work);
+ queue_work(workqueue, &devinfo->work);
}
out:
spin_unlock_irqrestore(&devinfo->lock, flags);
lockdep_assert_held(&devinfo->lock);
cmdinfo->state |= IS_IN_WORK_LIST;
- schedule_work(&devinfo->work);
+ queue_work(workqueue, &devinfo->work);
}
static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
struct uas_cmd_info *ci = (void *)&cmnd->SCp;
struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ if (status == -ENODEV) /* too late */
+ return;
+
scmd_printk(KERN_INFO, cmnd,
"%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
prefix, status, cmdinfo->uas_tag,
.id_table = uas_usb_ids,
};
-module_usb_driver(uas_driver);
+static int __init uas_init(void)
+{
+ int rv;
+
+ workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
+ if (!workqueue)
+ return -ENOMEM;
+
+ rv = usb_register(&uas_driver);
+ if (rv) {
+ destroy_workqueue(workqueue);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void __exit uas_exit(void)
+{
+ usb_deregister(&uas_driver);
+ destroy_workqueue(workqueue);
+}
+
+module_init(uas_init);
+module_exit(uas_exit);
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(USB_STORAGE);
USB_SC_DEVICE,USB_PR_DEVICE,NULL,
US_FL_MAX_SECTORS_64 ),
+/* Reported by Cyril Roelandt <tipecaml@gmail.com> */
+UNUSUAL_DEV( 0x357d, 0x7788, 0x0114, 0x0114,
+ "JMicron",
+ "USB to ATA/ATAPI Bridge",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA ),
+
/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100,
"iRiver",
const struct typec_altmode *
typec_altmode_get_partner(struct typec_altmode *adev)
{
- return adev ? &to_altmode(adev)->partner->adev : NULL;
+ if (!adev || !to_altmode(adev)->partner)
+ return NULL;
+
+ return &to_altmode(adev)->partner->adev;
}
EXPORT_SYMBOL_GPL(typec_altmode_get_partner);
static int pi3usb30532_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
- struct typec_switch_desc sw_desc;
- struct typec_mux_desc mux_desc;
+ struct typec_switch_desc sw_desc = { };
+ struct typec_mux_desc mux_desc = { };
struct pi3usb30532 *pi;
int ret;
*/
break;
+ case PORT_RESET:
+ case PORT_RESET_WAIT_OFF:
+ /*
+ * State set back to default mode once the timer completes.
+ * Ignore CC changes here.
+ */
+ break;
+
default:
if (tcpm_port_is_disconnected(port))
tcpm_set_state(port, unattached_state(port), 0);
case SRC_TRY_DEBOUNCE:
/* Do nothing, waiting for sink detection */
break;
+
+ case PORT_RESET:
+ case PORT_RESET_WAIT_OFF:
+ /*
+ * State set back to default mode once the timer completes.
+ * Ignore vbus changes here.
+ */
+ break;
+
default:
break;
}
case PORT_RESET_WAIT_OFF:
tcpm_set_state(port, tcpm_default_state(port), 0);
break;
+
case SRC_TRY_WAIT:
case SRC_TRY_DEBOUNCE:
/* Do nothing, waiting for sink detection */
break;
+
+ case PORT_RESET:
+ /*
+ * State set back to default mode once the timer completes.
+ * Ignore vbus changes here.
+ */
+ break;
+
default:
if (port->pwr_role == TYPEC_SINK &&
port->attached)
# SPDX-License-Identifier: GPL-2.0-only
-config VDPA
- tristate
+menuconfig VDPA
+ tristate "vDPA drivers"
help
Enable this module to support vDPA device that uses a
datapath which complies with virtio specifications with
vendor specific control path.
-menuconfig VDPA_MENU
- bool "VDPA drivers"
- default n
-
-if VDPA_MENU
+if VDPA
config VDPA_SIM
tristate "vDPA device simulator"
- depends on RUNTIME_TESTING_MENU
- select VDPA
+ depends on RUNTIME_TESTING_MENU && HAS_DMA && VHOST_DPN
select VHOST_RING
default n
help
development of vDPA.
config IFCVF
- tristate "Intel IFC VF VDPA driver"
+ tristate "Intel IFC VF vDPA driver"
depends on PCI_MSI
- select VDPA
default n
help
This kernel module can drive Intel IFC VF NIC to offload
To compile this driver as a module, choose M here: the module will
be called ifcvf.
-endif # VDPA_MENU
+endif # VDPA
static int ifcvf_hw_enable(struct ifcvf_hw *hw)
{
- struct ifcvf_lm_cfg __iomem *ifcvf_lm;
struct virtio_pci_common_cfg __iomem *cfg;
struct ifcvf_adapter *ifcvf;
u32 i;
- ifcvf_lm = (struct ifcvf_lm_cfg __iomem *)hw->lm_cfg;
ifcvf = vf_to_adapter(hw);
cfg = hw->common_cfg;
ifc_iowrite16(IFCVF_MSI_CONFIG_OFF, &cfg->msix_config);
static int ifcvf_start_datapath(void *private)
{
struct ifcvf_hw *vf = ifcvf_private_to_vf(private);
- struct ifcvf_adapter *ifcvf;
u8 status;
int ret;
- ifcvf = vf_to_adapter(vf);
vf->nr_vring = IFCVF_MAX_QUEUE_PAIRS * 2;
ret = ifcvf_start_hw(vf);
if (ret < 0) {
return IFCVF_SUBSYS_VENDOR_ID;
}
-static u16 ifcvf_vdpa_get_vq_align(struct vdpa_device *vdpa_dev)
+static u32 ifcvf_vdpa_get_vq_align(struct vdpa_device *vdpa_dev)
{
return IFCVF_QUEUE_ALIGNMENT;
}
/**
* vdpa_register_device - register a vDPA device
- * Callers must have a succeed call of vdpa_init_device() before.
+ * Callers must have a succeed call of vdpa_alloc_device() before.
* @vdev: the vdpa device to be registered to vDPA bus
*
* Returns an error when fail to add to vDPA bus
return vrh->last_avail_idx;
}
-static u16 vdpasim_get_vq_align(struct vdpa_device *vdpa)
+static u32 vdpasim_get_vq_align(struct vdpa_device *vdpa)
{
return VDPASIM_QUEUE_ALIGN;
}
status = vdpasim->status;
spin_unlock(&vdpasim->lock);
- return vdpasim->status;
+ return status;
}
static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status)
tristate
help
Generic IOTLB implementation for vhost and vringh.
+ This option is selected by any driver which needs to support
+ an IOMMU in software.
config VHOST_RING
tristate
This option is selected by any driver which needs to access
the host side of a virtio ring.
+config VHOST_DPN
+ bool
+ depends on !ARM || AEABI
+ default y
+ help
+ Anything selecting VHOST or VHOST_RING must depend on VHOST_DPN.
+ This excludes the deprecated ARM ABI since that forces a 4 byte
+ alignment on all structs - incompatible with virtio spec requirements.
+
config VHOST
tristate
select VHOST_IOTLB
config VHOST_NET
tristate "Host kernel accelerator for virtio net"
- depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP)
+ depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) && VHOST_DPN
select VHOST
---help---
This kernel module can be loaded in host kernel to accelerate
config VHOST_SCSI
tristate "VHOST_SCSI TCM fabric driver"
- depends on TARGET_CORE && EVENTFD
+ depends on TARGET_CORE && EVENTFD && VHOST_DPN
select VHOST
default n
---help---
config VHOST_VSOCK
tristate "vhost virtio-vsock driver"
- depends on VSOCKETS && EVENTFD
+ depends on VSOCKETS && EVENTFD && VHOST_DPN
select VHOST
select VIRTIO_VSOCKETS_COMMON
default n
config VHOST_VDPA
tristate "Vhost driver for vDPA-based backend"
- depends on EVENTFD
+ depends on EVENTFD && VHOST_DPN
select VHOST
- select VDPA
+ depends on VDPA
help
This kernel module can be loaded in host kernel to accelerate
guest virtio devices with the vDPA-based backends.
struct vhost_net_virtqueue *nvq =
container_of(vq, struct vhost_net_virtqueue, vq);
struct vhost_poll *poll = n->poll + (nvq - n->vqs);
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
return;
vhost_poll_stop(poll);
}
struct vhost_poll *poll = n->poll + (nvq - n->vqs);
struct socket *sock;
- sock = vq->private_data;
+ sock = vhost_vq_get_backend(vq);
if (!sock)
return 0;
return;
vhost_disable_notify(&net->dev, vq);
- sock = rvq->private_data;
+ sock = vhost_vq_get_backend(rvq);
busyloop_timeout = poll_rx ? rvq->busyloop_timeout:
tvq->busyloop_timeout;
if (r == tvq->num && tvq->busyloop_timeout) {
/* Flush batched packets first */
- if (!vhost_sock_zcopy(tvq->private_data))
- vhost_tx_batch(net, tnvq, tvq->private_data, msghdr);
+ if (!vhost_sock_zcopy(vhost_vq_get_backend(tvq)))
+ vhost_tx_batch(net, tnvq,
+ vhost_vq_get_backend(tvq),
+ msghdr);
vhost_net_busy_poll(net, rvq, tvq, busyloop_intr, false);
struct vhost_virtqueue *vq = &nvq->vq;
struct vhost_net *net = container_of(vq->dev, struct vhost_net,
dev);
- struct socket *sock = vq->private_data;
+ struct socket *sock = vhost_vq_get_backend(vq);
struct page_frag *alloc_frag = &net->page_frag;
struct virtio_net_hdr *gso;
struct xdp_buff *xdp = &nvq->xdp[nvq->batched_xdp];
struct socket *sock;
mutex_lock_nested(&vq->mutex, VHOST_NET_VQ_TX);
- sock = vq->private_data;
+ sock = vhost_vq_get_backend(vq);
if (!sock)
goto out;
int recv_pkts = 0;
mutex_lock_nested(&vq->mutex, VHOST_NET_VQ_RX);
- sock = vq->private_data;
+ sock = vhost_vq_get_backend(vq);
if (!sock)
goto out;
container_of(vq, struct vhost_net_virtqueue, vq);
mutex_lock(&vq->mutex);
- sock = vq->private_data;
+ sock = vhost_vq_get_backend(vq);
vhost_net_disable_vq(n, vq);
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
vhost_net_buf_unproduce(nvq);
nvq->rx_ring = NULL;
mutex_unlock(&vq->mutex);
}
/* start polling new socket */
- oldsock = vq->private_data;
+ oldsock = vhost_vq_get_backend(vq);
if (sock != oldsock) {
ubufs = vhost_net_ubuf_alloc(vq,
sock && vhost_sock_zcopy(sock));
}
vhost_net_disable_vq(n, vq);
- vq->private_data = sock;
+ vhost_vq_set_backend(vq, sock);
vhost_net_buf_unproduce(nvq);
r = vhost_vq_init_access(vq);
if (r)
return 0;
err_used:
- vq->private_data = oldsock;
+ vhost_vq_set_backend(vq, oldsock);
vhost_net_enable_vq(n, vq);
if (ubufs)
vhost_net_ubuf_put_wait_and_free(ubufs);
unsigned out, in;
int head, ret;
- if (!vq->private_data) {
+ if (!vhost_vq_get_backend(vq)) {
vs->vs_events_missed = true;
return;
}
} else {
struct vhost_scsi_tpg **vs_tpg, *tpg;
- vs_tpg = vq->private_data; /* validated at handler entry */
+ vs_tpg = vhost_vq_get_backend(vq); /* validated at handler entry */
tpg = READ_ONCE(vs_tpg[*vc->target]);
if (unlikely(!tpg)) {
* We can handle the vq only after the endpoint is setup by calling the
* VHOST_SCSI_SET_ENDPOINT ioctl.
*/
- vs_tpg = vq->private_data;
+ vs_tpg = vhost_vq_get_backend(vq);
if (!vs_tpg)
goto out;
* We can handle the vq only after the endpoint is setup by calling the
* VHOST_SCSI_SET_ENDPOINT ioctl.
*/
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
goto out;
memset(&vc, 0, sizeof(vc));
struct vhost_scsi *vs = container_of(vq->dev, struct vhost_scsi, dev);
mutex_lock(&vq->mutex);
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
goto out;
if (vs->vs_events_missed)
for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) {
vq = &vs->vqs[i].vq;
mutex_lock(&vq->mutex);
- vq->private_data = vs_tpg;
+ vhost_vq_set_backend(vq, vs_tpg);
vhost_vq_init_access(vq);
mutex_unlock(&vq->mutex);
}
for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) {
vq = &vs->vqs[i].vq;
mutex_lock(&vq->mutex);
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
}
}
void *private;
mutex_lock(&vq->mutex);
- private = vq->private_data;
+ private = vhost_vq_get_backend(vq);
if (!private) {
mutex_unlock(&vq->mutex);
return;
vqs[VHOST_TEST_VQ] = &n->vqs[VHOST_TEST_VQ];
n->vqs[VHOST_TEST_VQ].handle_kick = handle_vq_kick;
vhost_dev_init(dev, vqs, VHOST_TEST_VQ_MAX, UIO_MAXIOV,
- VHOST_TEST_PKT_WEIGHT, VHOST_TEST_WEIGHT);
+ VHOST_TEST_PKT_WEIGHT, VHOST_TEST_WEIGHT, NULL);
f->private_data = n;
void *private;
mutex_lock(&vq->mutex);
- private = vq->private_data;
- vq->private_data = NULL;
+ private = vhost_vq_get_backend(vq);
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
return private;
}
priv = test ? n : NULL;
/* start polling new socket */
- oldpriv = vq->private_data;
- vq->private_data = priv;
+ oldpriv = vhost_vq_get_backend(vq);
+ vhost_vq_set_backend(vq, priv);
r = vhost_vq_init_access(&n->vqs[index]);
{
void *priv = NULL;
long err;
- struct vhost_umem *umem;
+ struct vhost_iotlb *umem;
mutex_lock(&n->dev.mutex);
err = vhost_dev_check_owner(&n->dev);
struct vdpa_callback cb;
struct vhost_virtqueue *vq;
struct vhost_vring_state s;
- u8 status;
u32 idx;
long r;
idx = array_index_nospec(idx, v->nvqs);
vq = &v->vqs[idx];
- status = ops->get_status(vdpa);
-
if (cmd == VHOST_VDPA_SET_VRING_ENABLE) {
if (copy_from_user(&s, argp, sizeof(s)))
return -EFAULT;
int nvqs, i, r, opened;
v = container_of(inode->i_cdev, struct vhost_vdpa, cdev);
- if (!v)
- return -ENODEV;
opened = atomic_cmpxchg(&v->opened, 0, 1);
if (opened)
(1ULL << VIRTIO_F_VERSION_1)
};
+/**
+ * vhost_vq_set_backend - Set backend.
+ *
+ * @vq Virtqueue.
+ * @private_data The private data.
+ *
+ * Context: Need to call with vq->mutex acquired.
+ */
+static inline void vhost_vq_set_backend(struct vhost_virtqueue *vq,
+ void *private_data)
+{
+ vq->private_data = private_data;
+}
+
+/**
+ * vhost_vq_get_backend - Get backend.
+ *
+ * @vq Virtqueue.
+ *
+ * Context: Need to call with vq->mutex acquired.
+ * Return: Private data previously set with vhost_vq_set_backend.
+ */
+static inline void *vhost_vq_get_backend(struct vhost_virtqueue *vq)
+{
+ return vq->private_data;
+}
+
static inline bool vhost_has_feature(struct vhost_virtqueue *vq, int bit)
{
return vq->acked_features & (1ULL << bit);
#include <linux/uaccess.h>
#include <linux/slab.h>
#include <linux/export.h>
+#if IS_REACHABLE(CONFIG_VHOST_IOTLB)
#include <linux/bvec.h>
#include <linux/highmem.h>
#include <linux/vhost_iotlb.h>
+#endif
#include <uapi/linux/virtio_config.h>
static __printf(1,2) __cold void vringh_bad(const char *fmt, ...)
}
EXPORT_SYMBOL(vringh_need_notify_kern);
+#if IS_REACHABLE(CONFIG_VHOST_IOTLB)
+
static int iotlb_translate(const struct vringh *vrh,
u64 addr, u64 len, struct bio_vec iov[],
int iov_size, u32 perm)
}
EXPORT_SYMBOL(vringh_need_notify_iotlb);
+#endif
MODULE_LICENSE("GPL");
mutex_lock(&vq->mutex);
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
goto out;
/* Avoid further vmexits, we're already processing the virtqueue */
mutex_lock(&vq->mutex);
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
goto out;
vhost_disable_notify(&vsock->dev, vq);
goto err_vq;
}
- if (!vq->private_data) {
- vq->private_data = vsock;
+ if (!vhost_vq_get_backend(vq)) {
+ vhost_vq_set_backend(vq, vsock);
ret = vhost_vq_init_access(vq);
if (ret)
goto err_vq;
return 0;
err_vq:
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
for (i = 0; i < ARRAY_SIZE(vsock->vqs); i++) {
vq = &vsock->vqs[i];
mutex_lock(&vq->mutex);
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
}
err:
struct vhost_virtqueue *vq = &vsock->vqs[i];
mutex_lock(&vq->mutex);
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
}
config VIRTIO_VDPA
tristate "vDPA driver for virtio devices"
- select VDPA
+ depends on VDPA
select VIRTIO
help
This driver provides support for virtio based paravirtual
}
-int virtballoon_free_page_report(struct page_reporting_dev_info *pr_dev_info,
+static int virtballoon_free_page_report(struct page_reporting_dev_info *pr_dev_info,
struct scatterlist *sg, unsigned int nents)
{
struct virtio_balloon *vb =
if (test_and_clear_bit(VIRTIO_BALLOON_CONFIG_READ_CMD_ID,
&vb->config_read_bitmap))
virtio_cread(vb->vdev, struct virtio_balloon_config,
- free_page_report_cmd_id,
+ free_page_hint_cmd_id,
&vb->cmd_id_received_cache);
return vb->cmd_id_received_cache;
#include <linux/virtio.h>
#include <linux/virtio_config.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <uapi/linux/virtio_ids.h>
#include <uapi/linux/virtio_input.h>
{
struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
+ writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
writel_relaxed(0, wdt->base + WDTCONTROL);
writel_relaxed(0, wdt->base + WDTLOAD);
writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL);
+ /* Flush posted writes. */
+ readl_relaxed(wdt->base + WDTLOCK);
+
return 0;
}
int xenbus_map_ring_valloc(struct xenbus_device *dev, grant_ref_t *gnt_refs,
unsigned int nr_grefs, void **vaddr)
{
- return ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+ int err;
+
+ err = ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+ /* Some hypervisors are buggy and can return 1. */
+ if (err > 0)
+ err = GNTST_general_error;
+
+ return err;
}
EXPORT_SYMBOL_GPL(xenbus_map_ring_valloc);
spin_lock(&server->probe_lock);
- if (!test_bit(AFS_SERVER_FL_HAVE_EPOCH, &server->flags)) {
+ if (!test_and_set_bit(AFS_SERVER_FL_HAVE_EPOCH, &server->flags)) {
server->cm_epoch = call->epoch;
server->probe.cm_epoch = call->epoch;
goto out;
struct dentry *parent;
struct inode *inode;
struct key *key;
- afs_dataversion_t dir_version;
+ afs_dataversion_t dir_version, invalid_before;
long de_version;
int ret;
if (de_version == (long)dir_version)
goto out_valid_noupdate;
- dir_version = dir->invalid_before;
- if (de_version - (long)dir_version >= 0)
+ invalid_before = dir->invalid_before;
+ if (de_version - (long)invalid_before >= 0)
goto out_valid;
_debug("dir modified");
struct afs_fs_cursor fc;
struct afs_vnode *dvnode = AFS_FS_I(dir);
struct key *key;
+ afs_dataversion_t data_version;
int ret;
mode |= S_IFDIR;
ret = -ERESTARTSYS;
if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
- afs_dataversion_t data_version = dvnode->status.data_version + 1;
+ data_version = dvnode->status.data_version + 1;
while (afs_select_fileserver(&fc)) {
fc.cb_break = afs_calc_vnode_cb_break(dvnode);
goto error_key;
}
- if (ret == 0 &&
- test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
- afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
- afs_edit_dir_for_create);
+ if (ret == 0) {
+ down_write(&dvnode->validate_lock);
+ if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+ dvnode->status.data_version == data_version)
+ afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
+ afs_edit_dir_for_create);
+ up_write(&dvnode->validate_lock);
+ }
key_put(key);
kfree(scb);
struct afs_fs_cursor fc;
struct afs_vnode *dvnode = AFS_FS_I(dir), *vnode = NULL;
struct key *key;
+ afs_dataversion_t data_version;
int ret;
_enter("{%llx:%llu},{%pd}",
ret = -ERESTARTSYS;
if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
- afs_dataversion_t data_version = dvnode->status.data_version + 1;
+ data_version = dvnode->status.data_version + 1;
while (afs_select_fileserver(&fc)) {
fc.cb_break = afs_calc_vnode_cb_break(dvnode);
ret = afs_end_vnode_operation(&fc);
if (ret == 0) {
afs_dir_remove_subdir(dentry);
- if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+ down_write(&dvnode->validate_lock);
+ if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+ dvnode->status.data_version == data_version)
afs_edit_dir_remove(dvnode, &dentry->d_name,
afs_edit_dir_for_rmdir);
+ up_write(&dvnode->validate_lock);
}
}
ret = afs_end_vnode_operation(&fc);
if (ret == 0 && !(scb[1].have_status || scb[1].have_error))
ret = afs_dir_remove_link(dvnode, dentry, key);
- if (ret == 0 &&
- test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
- afs_edit_dir_remove(dvnode, &dentry->d_name,
- afs_edit_dir_for_unlink);
+
+ if (ret == 0) {
+ down_write(&dvnode->validate_lock);
+ if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+ dvnode->status.data_version == data_version)
+ afs_edit_dir_remove(dvnode, &dentry->d_name,
+ afs_edit_dir_for_unlink);
+ up_write(&dvnode->validate_lock);
+ }
}
if (need_rehash && ret < 0 && ret != -ENOENT)
struct afs_status_cb *scb;
struct afs_vnode *dvnode = AFS_FS_I(dir);
struct key *key;
+ afs_dataversion_t data_version;
int ret;
mode |= S_IFREG;
ret = -ERESTARTSYS;
if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
- afs_dataversion_t data_version = dvnode->status.data_version + 1;
+ data_version = dvnode->status.data_version + 1;
while (afs_select_fileserver(&fc)) {
fc.cb_break = afs_calc_vnode_cb_break(dvnode);
goto error_key;
}
- if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+ down_write(&dvnode->validate_lock);
+ if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+ dvnode->status.data_version == data_version)
afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
afs_edit_dir_for_create);
+ up_write(&dvnode->validate_lock);
kfree(scb);
key_put(key);
struct afs_vnode *dvnode = AFS_FS_I(dir);
struct afs_vnode *vnode = AFS_FS_I(d_inode(from));
struct key *key;
+ afs_dataversion_t data_version;
int ret;
_enter("{%llx:%llu},{%llx:%llu},{%pd}",
ret = -ERESTARTSYS;
if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
- afs_dataversion_t data_version = dvnode->status.data_version + 1;
+ data_version = dvnode->status.data_version + 1;
if (mutex_lock_interruptible_nested(&vnode->io_lock, 1) < 0) {
afs_end_vnode_operation(&fc);
goto error_key;
}
- if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+ down_write(&dvnode->validate_lock);
+ if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+ dvnode->status.data_version == data_version)
afs_edit_dir_add(dvnode, &dentry->d_name, &vnode->fid,
afs_edit_dir_for_link);
+ up_write(&dvnode->validate_lock);
key_put(key);
kfree(scb);
struct afs_status_cb *scb;
struct afs_vnode *dvnode = AFS_FS_I(dir);
struct key *key;
+ afs_dataversion_t data_version;
int ret;
_enter("{%llx:%llu},{%pd},%s",
ret = -ERESTARTSYS;
if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
- afs_dataversion_t data_version = dvnode->status.data_version + 1;
+ data_version = dvnode->status.data_version + 1;
while (afs_select_fileserver(&fc)) {
fc.cb_break = afs_calc_vnode_cb_break(dvnode);
goto error_key;
}
- if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+ down_write(&dvnode->validate_lock);
+ if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+ dvnode->status.data_version == data_version)
afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
afs_edit_dir_for_symlink);
+ up_write(&dvnode->validate_lock);
key_put(key);
kfree(scb);
struct dentry *tmp = NULL, *rehash = NULL;
struct inode *new_inode;
struct key *key;
+ afs_dataversion_t orig_data_version;
+ afs_dataversion_t new_data_version;
bool new_negative = d_is_negative(new_dentry);
int ret;
ret = -ERESTARTSYS;
if (afs_begin_vnode_operation(&fc, orig_dvnode, key, true)) {
- afs_dataversion_t orig_data_version;
- afs_dataversion_t new_data_version;
- struct afs_status_cb *new_scb = &scb[1];
-
orig_data_version = orig_dvnode->status.data_version + 1;
if (orig_dvnode != new_dvnode) {
new_data_version = new_dvnode->status.data_version + 1;
} else {
new_data_version = orig_data_version;
- new_scb = &scb[0];
}
while (afs_select_fileserver(&fc)) {
fc.cb_break_2 = afs_calc_vnode_cb_break(new_dvnode);
afs_fs_rename(&fc, old_dentry->d_name.name,
new_dvnode, new_dentry->d_name.name,
- &scb[0], new_scb);
+ &scb[0], &scb[1]);
}
afs_vnode_commit_status(&fc, orig_dvnode, fc.cb_break,
if (ret == 0) {
if (rehash)
d_rehash(rehash);
- if (test_bit(AFS_VNODE_DIR_VALID, &orig_dvnode->flags))
- afs_edit_dir_remove(orig_dvnode, &old_dentry->d_name,
- afs_edit_dir_for_rename_0);
+ down_write(&orig_dvnode->validate_lock);
+ if (test_bit(AFS_VNODE_DIR_VALID, &orig_dvnode->flags) &&
+ orig_dvnode->status.data_version == orig_data_version)
+ afs_edit_dir_remove(orig_dvnode, &old_dentry->d_name,
+ afs_edit_dir_for_rename_0);
+ if (orig_dvnode != new_dvnode) {
+ up_write(&orig_dvnode->validate_lock);
- if (!new_negative &&
- test_bit(AFS_VNODE_DIR_VALID, &new_dvnode->flags))
- afs_edit_dir_remove(new_dvnode, &new_dentry->d_name,
- afs_edit_dir_for_rename_1);
+ down_write(&new_dvnode->validate_lock);
+ }
+ if (test_bit(AFS_VNODE_DIR_VALID, &new_dvnode->flags) &&
+ orig_dvnode->status.data_version == new_data_version) {
+ if (!new_negative)
+ afs_edit_dir_remove(new_dvnode, &new_dentry->d_name,
+ afs_edit_dir_for_rename_1);
- if (test_bit(AFS_VNODE_DIR_VALID, &new_dvnode->flags))
afs_edit_dir_add(new_dvnode, &new_dentry->d_name,
&vnode->fid, afs_edit_dir_for_rename_2);
+ }
new_inode = d_inode(new_dentry);
if (new_inode) {
* Note that if we ever implement RENAME_EXCHANGE, we'll have
* to update both dentries with opposing dir versions.
*/
- if (new_dvnode != orig_dvnode) {
- afs_update_dentry_version(&fc, old_dentry, &scb[1]);
- afs_update_dentry_version(&fc, new_dentry, &scb[1]);
- } else {
- afs_update_dentry_version(&fc, old_dentry, &scb[0]);
- afs_update_dentry_version(&fc, new_dentry, &scb[0]);
- }
+ afs_update_dentry_version(&fc, old_dentry, &scb[1]);
+ afs_update_dentry_version(&fc, new_dentry, &scb[1]);
d_move(old_dentry, new_dentry);
+ up_write(&new_dvnode->validate_lock);
goto error_tmp;
}
{
struct afs_fs_cursor fc;
struct afs_status_cb *scb;
+ afs_dataversion_t dir_data_version;
int ret = -ERESTARTSYS;
_enter("%pd,%pd", old, new);
trace_afs_silly_rename(vnode, false);
if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
- afs_dataversion_t dir_data_version = dvnode->status.data_version + 1;
+ dir_data_version = dvnode->status.data_version + 1;
while (afs_select_fileserver(&fc)) {
fc.cb_break = afs_calc_vnode_cb_break(dvnode);
dvnode->silly_key = key_get(key);
}
- if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+ down_write(&dvnode->validate_lock);
+ if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+ dvnode->status.data_version == dir_data_version) {
afs_edit_dir_remove(dvnode, &old->d_name,
afs_edit_dir_for_silly_0);
- if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
afs_edit_dir_add(dvnode, &new->d_name,
&vnode->fid, afs_edit_dir_for_silly_1);
+ }
+ up_write(&dvnode->validate_lock);
}
kfree(scb);
clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags);
}
}
- if (ret == 0 &&
- test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
- afs_edit_dir_remove(dvnode, &dentry->d_name,
- afs_edit_dir_for_unlink);
+ if (ret == 0) {
+ down_write(&dvnode->validate_lock);
+ if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+ dvnode->status.data_version == dir_data_version)
+ afs_edit_dir_remove(dvnode, &dentry->d_name,
+ afs_edit_dir_for_unlink);
+ up_write(&dvnode->validate_lock);
+ }
}
kfree(scb);
(unsigned int)rtt, ret);
have_result |= afs_fs_probe_done(server);
- if (have_result) {
- server->probe.have_result = true;
- wake_up_var(&server->probe.have_result);
+ if (have_result)
wake_up_all(&server->probe_wq);
- }
}
/*
bool inline_error = (call->operation_ID == afs_FS_InlineBulkStatus);
u64 data_version, size;
u32 type, abort_code;
+ int ret;
abort_code = ntohl(xdr->abort_code);
*/
status->abort_code = abort_code;
scb->have_error = true;
- return 0;
+ goto good;
}
pr_warn("Unknown AFSFetchStatus version %u\n", ntohl(xdr->if_version));
if (abort_code != 0 && inline_error) {
status->abort_code = abort_code;
- return 0;
+ scb->have_error = true;
+ goto good;
}
type = ntohl(xdr->type);
data_version |= (u64)ntohl(xdr->data_version_hi) << 32;
status->data_version = data_version;
scb->have_status = true;
-
+good:
+ ret = 0;
+advance:
*_bp = (const void *)*_bp + sizeof(*xdr);
- return 0;
+ return ret;
bad:
xdr_dump_bad(*_bp);
- return afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+ ret = afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+ goto advance;
}
static time64_t xdr_decode_expiry(struct afs_call *call, u32 expiry)
if (ret < 0)
return ret;
- /* unmarshall the reply once we've received all of it */
+ /* If the two dirs are the same, we have two copies of the same status
+ * report, so we just decode it twice.
+ */
bp = call->buffer;
ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
if (ret < 0)
return ret;
- if (call->out_dir_scb != call->out_scb) {
- ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
- if (ret < 0)
- return ret;
- }
+ ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
+ if (ret < 0)
+ return ret;
xdr_decode_AFSVolSync(&bp, call->out_volsync);
_leave(" = 0 [done]");
u32 abort_code;
u32 cm_epoch;
short error;
- bool have_result;
bool responded:1;
bool is_yfs:1;
bool not_yfs:1;
bool local_failure:1;
- bool no_epoch:1;
bool cm_probed:1;
bool said_rebooted:1;
bool said_inconsistent:1;
extern void afs_activate_volume(struct afs_volume *);
extern void afs_deactivate_volume(struct afs_volume *);
extern void afs_put_volume(struct afs_cell *, struct afs_volume *);
-extern int afs_check_volume_status(struct afs_volume *, struct key *);
+extern int afs_check_volume_status(struct afs_volume *, struct afs_fs_cursor *);
/*
* write.c
write_unlock(&vnode->volume->servers_lock);
set_bit(AFS_VOLUME_NEEDS_UPDATE, &vnode->volume->flags);
- error = afs_check_volume_status(vnode->volume, fc->key);
+ error = afs_check_volume_status(vnode->volume, fc);
if (error < 0)
goto failed_set_error;
set_bit(AFS_VOLUME_WAIT, &vnode->volume->flags);
set_bit(AFS_VOLUME_NEEDS_UPDATE, &vnode->volume->flags);
- error = afs_check_volume_status(vnode->volume, fc->key);
+ error = afs_check_volume_status(vnode->volume, fc);
if (error < 0)
goto failed_set_error;
/* See if we need to do an update of the volume record. Note that the
* volume may have moved or even have been deleted.
*/
- error = afs_check_volume_status(vnode->volume, fc->key);
+ error = afs_check_volume_status(vnode->volume, fc);
if (error < 0)
goto failed_set_error;
}
ret = wait_on_bit(&server->flags, AFS_SERVER_FL_UPDATING,
- TASK_INTERRUPTIBLE);
+ (fc->flags & AFS_FS_CURSOR_INTR) ?
+ TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
if (ret == -ERESTARTSYS) {
- if (!(fc->flags & AFS_FS_CURSOR_INTR) && server->addresses) {
- _leave(" = t [intr]");
- return true;
- }
fc->error = ret;
_leave(" = f [intr]");
return false;
pr_notice("VC: - nr=%u/%u/%u pf=%u\n",
a->nr_ipv4, a->nr_addrs, a->max_addrs,
a->preferred);
- pr_notice("VC: - pr=%lx R=%lx F=%lx\n",
- a->probed, a->responded, a->failed);
+ pr_notice("VC: - R=%lx F=%lx\n",
+ a->responded, a->failed);
if (a == vc->ac.alist)
pr_notice("VC: - current\n");
}
/*
* Make sure the volume record is up to date.
*/
-int afs_check_volume_status(struct afs_volume *volume, struct key *key)
+int afs_check_volume_status(struct afs_volume *volume, struct afs_fs_cursor *fc)
{
time64_t now = ktime_get_real_seconds();
int ret, retries = 0;
}
if (!test_and_set_bit_lock(AFS_VOLUME_UPDATING, &volume->flags)) {
- ret = afs_update_volume_status(volume, key);
+ ret = afs_update_volume_status(volume, fc->key);
clear_bit_unlock(AFS_VOLUME_WAIT, &volume->flags);
clear_bit_unlock(AFS_VOLUME_UPDATING, &volume->flags);
wake_up_bit(&volume->flags, AFS_VOLUME_WAIT);
return 0;
}
- ret = wait_on_bit(&volume->flags, AFS_VOLUME_WAIT, TASK_INTERRUPTIBLE);
+ ret = wait_on_bit(&volume->flags, AFS_VOLUME_WAIT,
+ (fc->flags & AFS_FS_CURSOR_INTR) ?
+ TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
if (ret == -ERESTARTSYS) {
_leave(" = %d", ret);
return ret;
int i;
pr_notice("YFS XDR: Bad status record\n");
- for (i = 0; i < 5 * 4 * 4; i += 16) {
+ for (i = 0; i < 6 * 4 * 4; i += 16) {
memcpy(x, bp, 16);
bp += 4;
pr_notice("%03x: %08x %08x %08x %08x\n",
i, ntohl(x[0]), ntohl(x[1]), ntohl(x[2]), ntohl(x[3]));
}
- memcpy(x, bp, 4);
- pr_notice("0x50: %08x\n", ntohl(x[0]));
+ memcpy(x, bp, 8);
+ pr_notice("0x60: %08x %08x\n", ntohl(x[0]), ntohl(x[1]));
}
/*
const struct yfs_xdr_YFSFetchStatus *xdr = (const void *)*_bp;
struct afs_file_status *status = &scb->status;
u32 type;
+ int ret;
status->abort_code = ntohl(xdr->abort_code);
if (status->abort_code != 0) {
if (status->abort_code == VNOVNODE)
status->nlink = 0;
scb->have_error = true;
- return 0;
+ goto good;
}
type = ntohl(xdr->type);
status->size = xdr_to_u64(xdr->size);
status->data_version = xdr_to_u64(xdr->data_version);
scb->have_status = true;
-
+good:
+ ret = 0;
+advance:
*_bp += xdr_size(xdr);
- return 0;
+ return ret;
bad:
xdr_dump_bad(*_bp);
- return afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+ ret = afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+ goto advance;
}
/*
ret = xdr_decode_YFSFetchStatus(&bp, call, call->out_dir_scb);
if (ret < 0)
return ret;
- if (call->out_dir_scb != call->out_scb) {
- ret = xdr_decode_YFSFetchStatus(&bp, call, call->out_scb);
- if (ret < 0)
- return ret;
- }
+ ret = xdr_decode_YFSFetchStatus(&bp, call, call->out_scb);
+ if (ret < 0)
+ return ret;
xdr_decode_YFSVolSync(&bp, call->out_volsync);
_leave(" = 0 [done]");
#include <linux/module.h>
#include <linux/blkpg.h>
#include <linux/magic.h>
-#include <linux/dax.h>
#include <linux/buffer_head.h>
#include <linux/swap.h>
#include <linux/pagevec.h>
struct gendisk *disk = bdev->bd_disk;
struct block_device *victim = NULL;
+ /*
+ * Sync early if it looks like we're the last one. If someone else
+ * opens the block device between now and the decrement of bd_openers
+ * then we did a sync that we didn't need to, but that's not the end
+ * of the world and we want to avoid long (could be several minute)
+ * syncs while holding the mutex.
+ */
+ if (bdev->bd_openers == 1)
+ sync_blockdev(bdev);
+
mutex_lock_nested(&bdev->bd_mutex, for_part);
if (for_part)
bdev->bd_part_count--;
path = btrfs_alloc_path();
if (!path) {
ret = -ENOMEM;
- goto out;
+ goto out_put_group;
}
/*
ret = btrfs_orphan_add(trans, BTRFS_I(inode));
if (ret) {
btrfs_add_delayed_iput(inode);
- goto out;
+ goto out_put_group;
}
clear_nlink(inode);
/* One for the block groups ref */
ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1);
if (ret < 0)
- goto out;
+ goto out_put_group;
if (ret > 0)
btrfs_release_path(path);
if (ret == 0) {
ret = btrfs_del_item(trans, tree_root, path);
if (ret)
- goto out;
+ goto out_put_group;
btrfs_release_path(path);
}
ret = remove_block_group_free_space(trans, block_group);
if (ret)
- goto out;
+ goto out_put_group;
- btrfs_put_block_group(block_group);
+ /* Once for the block groups rbtree */
btrfs_put_block_group(block_group);
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
/* once for the tree */
free_extent_map(em);
}
+
+out_put_group:
+ /* Once for the lookup reference */
+ btrfs_put_block_group(block_group);
out:
if (remove_rsv)
btrfs_delayed_refs_rsv_release(fs_info, 1);
if (ret)
goto err;
mutex_unlock(&fs_info->unused_bg_unpin_mutex);
+ if (prev_trans)
+ btrfs_put_transaction(prev_trans);
return true;
err:
mutex_unlock(&fs_info->unused_bg_unpin_mutex);
+ if (prev_trans)
+ btrfs_put_transaction(prev_trans);
btrfs_dec_block_group_ro(bg);
return false;
}
space_info->bytes_reserved > 0 ||
space_info->bytes_may_use > 0))
btrfs_dump_space_info(info, space_info, 0, 0);
+ WARN_ON(space_info->reclaim_size > 0);
list_del(&space_info->list);
btrfs_sysfs_remove_space_info(space_info);
}
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
#ifndef BTRFS_DISCARD_H
#define BTRFS_DISCARD_H
for (i = 0; i < ret; i++)
btrfs_drop_and_free_fs_root(fs_info, gang[i]);
}
-
- if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state))
- btrfs_free_log_root_tree(NULL, fs_info);
}
static void btrfs_init_scrub(struct btrfs_fs_info *fs_info)
spin_unlock(&fs_info->fs_roots_radix_lock);
if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
- btrfs_free_log(NULL, root);
+ ASSERT(root->log_root == NULL);
if (root->reloc_root) {
btrfs_put_root(root->reloc_root);
root->reloc_root = NULL;
up_write(&fs_info->cleanup_work_sem);
}
+static void btrfs_drop_all_logs(struct btrfs_fs_info *fs_info)
+{
+ struct btrfs_root *gang[8];
+ u64 root_objectid = 0;
+ int ret;
+
+ spin_lock(&fs_info->fs_roots_radix_lock);
+ while ((ret = radix_tree_gang_lookup(&fs_info->fs_roots_radix,
+ (void **)gang, root_objectid,
+ ARRAY_SIZE(gang))) != 0) {
+ int i;
+
+ for (i = 0; i < ret; i++)
+ gang[i] = btrfs_grab_root(gang[i]);
+ spin_unlock(&fs_info->fs_roots_radix_lock);
+
+ for (i = 0; i < ret; i++) {
+ if (!gang[i])
+ continue;
+ root_objectid = gang[i]->root_key.objectid;
+ btrfs_free_log(NULL, gang[i]);
+ btrfs_put_root(gang[i]);
+ }
+ root_objectid++;
+ spin_lock(&fs_info->fs_roots_radix_lock);
+ }
+ spin_unlock(&fs_info->fs_roots_radix_lock);
+ btrfs_free_log_root_tree(NULL, fs_info);
+}
+
static void btrfs_destroy_ordered_extents(struct btrfs_root *root)
{
struct btrfs_ordered_extent *ordered;
btrfs_destroy_delayed_inodes(fs_info);
btrfs_assert_delayed_root_empty(fs_info);
btrfs_destroy_all_delalloc_inodes(fs_info);
+ btrfs_drop_all_logs(fs_info);
mutex_unlock(&fs_info->transaction_kthread_mutex);
return 0;
atomic_inc(&root->log_batch);
/*
+ * If the inode needs a full sync, make sure we use a full range to
+ * avoid log tree corruption, due to hole detection racing with ordered
+ * extent completion for adjacent ranges and races between logging and
+ * completion of ordered extents for adjancent ranges - both races
+ * could lead to file extent items in the log with overlapping ranges.
+ * Do this while holding the inode lock, to avoid races with other
+ * tasks.
+ */
+ if (test_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
+ &BTRFS_I(inode)->runtime_flags)) {
+ start = 0;
+ end = LLONG_MAX;
+ }
+
+ /*
* Before we acquired the inode's lock, someone may have dirtied more
* pages in the target range. We need to make sure that writeback for
* any such pages does not start while we are logging the inode, because
size);
inode_add_bytes(dst, datal);
set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &BTRFS_I(dst)->runtime_flags);
+ ret = btrfs_inode_set_file_extent_range(BTRFS_I(dst), 0, aligned_end);
out:
if (!ret && !trans) {
/*
if (!reloc_root)
return 0;
- if (btrfs_root_last_snapshot(&reloc_root->root_item) ==
- root->fs_info->running_transaction->transid - 1)
+ if (btrfs_header_generation(reloc_root->commit_root) ==
+ root->fs_info->running_transaction->transid)
return 0;
/*
* if there is reloc tree and it was created in previous
int clear_rsv = 0;
int ret;
- if (!rc || !rc->create_reloc_tree ||
- root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+ if (!rc)
return 0;
/*
if (reloc_root_is_dead(root))
return 0;
+ /*
+ * This is subtle but important. We do not do
+ * record_root_in_transaction for reloc roots, instead we record their
+ * corresponding fs root, and then here we update the last trans for the
+ * reloc root. This means that we have to do this for the entire life
+ * of the reloc root, regardless of which stage of the relocation we are
+ * in.
+ */
if (root->reloc_root) {
reloc_root = root->reloc_root;
reloc_root->last_trans = trans->transid;
return 0;
}
+ /*
+ * We are merging reloc roots, we do not need new reloc trees. Also
+ * reloc trees never need their own reloc tree.
+ */
+ if (!rc->create_reloc_tree ||
+ root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+ return 0;
+
if (!trans->reloc_reserved) {
rsv = trans->block_rsv;
trans->block_rsv = rc->block_rsv;
if (IS_ERR(fs_root)) {
err = PTR_ERR(fs_root);
list_add_tail(&reloc_root->root_list, &reloc_roots);
+ btrfs_end_transaction(trans);
goto out_unset;
}
return 0;
}
+static void remove_ticket(struct btrfs_space_info *space_info,
+ struct reserve_ticket *ticket)
+{
+ if (!list_empty(&ticket->list)) {
+ list_del_init(&ticket->list);
+ ASSERT(space_info->reclaim_size >= ticket->bytes);
+ space_info->reclaim_size -= ticket->bytes;
+ }
+}
+
/*
* This is for space we already have accounted in space_info->bytes_may_use, so
* basically when we're returning space from block_rsv's.
btrfs_space_info_update_bytes_may_use(fs_info,
space_info,
ticket->bytes);
- list_del_init(&ticket->list);
- ASSERT(space_info->reclaim_size >= ticket->bytes);
- space_info->reclaim_size -= ticket->bytes;
+ remove_ticket(space_info, ticket);
ticket->bytes = 0;
space_info->tickets_id++;
wake_up(&ticket->wait);
btrfs_info(fs_info, "failing ticket with %llu bytes",
ticket->bytes);
- list_del_init(&ticket->list);
+ remove_ticket(space_info, ticket);
ticket->error = -ENOSPC;
wake_up(&ticket->wait);
* despite getting an error, resulting in a space leak
* (bytes_may_use counter of our space_info).
*/
- list_del_init(&ticket->list);
+ remove_ticket(space_info, ticket);
ticket->error = -EINTR;
break;
}
* either the async reclaim job deletes the ticket from the list
* or we delete it ourselves at wait_reserve_ticket().
*/
- list_del_init(&ticket->list);
+ remove_ticket(space_info, ticket);
if (!ret)
ret = -ENOSPC;
}
static int btrfs_log_inode(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_inode *inode,
int inode_only,
- u64 start,
- u64 end,
+ const loff_t start,
+ const loff_t end,
struct btrfs_log_ctx *ctx);
static int link_to_fixup_dir(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
static int btrfs_log_holes(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_inode *inode,
- struct btrfs_path *path,
- const u64 start,
- const u64 end)
+ struct btrfs_path *path)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_key key;
const u64 ino = btrfs_ino(inode);
const u64 i_size = i_size_read(&inode->vfs_inode);
- u64 prev_extent_end = start;
+ u64 prev_extent_end = 0;
int ret;
if (!btrfs_fs_incompat(fs_info, NO_HOLES) || i_size == 0)
key.objectid = ino;
key.type = BTRFS_EXTENT_DATA_KEY;
- key.offset = start;
+ key.offset = 0;
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
return ret;
- if (ret > 0 && path->slots[0] > 0) {
- btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0] - 1);
- if (key.objectid == ino && key.type == BTRFS_EXTENT_DATA_KEY)
- path->slots[0]--;
- }
-
while (true) {
struct extent_buffer *leaf = path->nodes[0];
- u64 extent_end;
if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) {
ret = btrfs_next_leaf(root, path);
if (key.objectid != ino || key.type != BTRFS_EXTENT_DATA_KEY)
break;
- extent_end = btrfs_file_extent_end(path);
- if (extent_end <= start)
- goto next_slot;
-
/* We have a hole, log it. */
if (prev_extent_end < key.offset) {
- u64 hole_len;
-
- if (key.offset >= end)
- hole_len = end - prev_extent_end;
- else
- hole_len = key.offset - prev_extent_end;
+ const u64 hole_len = key.offset - prev_extent_end;
/*
* Release the path to avoid deadlocks with other code
leaf = path->nodes[0];
}
- prev_extent_end = min(extent_end, end);
- if (extent_end >= end)
- break;
-next_slot:
+ prev_extent_end = btrfs_file_extent_end(path);
path->slots[0]++;
cond_resched();
}
- if (prev_extent_end < end && prev_extent_end < i_size) {
+ if (prev_extent_end < i_size) {
u64 hole_len;
btrfs_release_path(path);
- hole_len = min(ALIGN(i_size, fs_info->sectorsize), end);
- hole_len -= prev_extent_end;
+ hole_len = ALIGN(i_size - prev_extent_end, fs_info->sectorsize);
ret = btrfs_insert_file_extent(trans, root->log_root,
ino, prev_extent_end, 0, 0,
hole_len, 0, hole_len,
const u64 logged_isize,
const bool recursive_logging,
const int inode_only,
- const u64 start,
- const u64 end,
struct btrfs_log_ctx *ctx,
bool *need_log_inode_item)
{
int ins_nr = 0;
int ret;
- /*
- * We must make sure we don't copy extent items that are entirely out of
- * the range [start, end - 1]. This is not just an optimization to avoid
- * copying but also needed to avoid a corruption where we end up with
- * file extent items in the log tree that have overlapping ranges - this
- * can happen if we race with ordered extent completion for ranges that
- * are outside our target range. For example we copy an extent item and
- * when we move to the next leaf, that extent was trimmed and a new one
- * covering a subrange of it, but with a higher key, was inserted - we
- * would then copy this other extent too, resulting in a log tree with
- * 2 extent items that represent overlapping ranges.
- *
- * We can copy the entire extents at the range bondaries however, even
- * if they cover an area outside the target range. That's ok.
- */
while (1) {
ret = btrfs_search_forward(root, min_key, path, trans->transid);
if (ret < 0)
goto next_slot;
}
- if (min_key->type == BTRFS_EXTENT_DATA_KEY) {
- const u64 extent_end = btrfs_file_extent_end(path);
-
- if (extent_end <= start) {
- if (ins_nr > 0) {
- ret = copy_items(trans, inode, dst_path,
- path, ins_start_slot,
- ins_nr, inode_only,
- logged_isize);
- if (ret < 0)
- return ret;
- ins_nr = 0;
- }
- goto next_slot;
- }
- if (extent_end >= end) {
- ins_nr++;
- if (ins_nr == 1)
- ins_start_slot = path->slots[0];
- break;
- }
- }
-
if (ins_nr && ins_start_slot + ins_nr == path->slots[0]) {
ins_nr++;
goto next_slot;
static int btrfs_log_inode(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_inode *inode,
int inode_only,
- u64 start,
- u64 end,
+ const loff_t start,
+ const loff_t end,
struct btrfs_log_ctx *ctx)
{
struct btrfs_fs_info *fs_info = root->fs_info;
return -ENOMEM;
}
- start = ALIGN_DOWN(start, fs_info->sectorsize);
- end = ALIGN(end, fs_info->sectorsize);
-
min_key.objectid = ino;
min_key.type = BTRFS_INODE_ITEM_KEY;
min_key.offset = 0;
err = copy_inode_items_to_log(trans, inode, &min_key, &max_key,
path, dst_path, logged_isize,
- recursive_logging, inode_only,
- start, end, ctx, &need_log_inode_item);
+ recursive_logging, inode_only, ctx,
+ &need_log_inode_item);
if (err)
goto out_unlock;
if (max_key.type >= BTRFS_EXTENT_DATA_KEY && !fast_search) {
btrfs_release_path(path);
btrfs_release_path(dst_path);
- err = btrfs_log_holes(trans, root, inode, path, start, end);
+ err = btrfs_log_holes(trans, root, inode, path);
if (err)
goto out_unlock;
}
struct page *page;
struct buffer_head *bh;
sector_t end_block;
- int ret = 0; /* Will call free_more_memory() */
+ int ret = 0;
gfp_t gfp_mask;
gfp_mask = mapping_gfp_constraint(inode->i_mapping, ~__GFP_FS) | gfp;
}
EXPORT_SYMBOL(__breadahead);
+void __breadahead_gfp(struct block_device *bdev, sector_t block, unsigned size,
+ gfp_t gfp)
+{
+ struct buffer_head *bh = __getblk_gfp(bdev, block, size, gfp);
+ if (likely(bh)) {
+ ll_rw_block(REQ_OP_READ, REQ_RAHEAD, 1, &bh);
+ brelse(bh);
+ }
+}
+EXPORT_SYMBOL(__breadahead_gfp);
+
/**
* __bread_gfp() - reads a specified block and returns the bh
* @bdev: the block_device to read from
/* If op failed, mark everyone involved for errors */
if (result) {
- int pathlen;
- u64 base;
+ int pathlen = 0;
+ u64 base = 0;
char *path = ceph_mdsc_build_path(req->r_dentry, &pathlen,
&base, 0);
if (result) {
struct dentry *dentry = req->r_dentry;
- int pathlen;
- u64 base;
+ int pathlen = 0;
+ u64 base = 0;
char *path = ceph_mdsc_build_path(req->r_dentry, &pathlen,
&base, 0);
static inline void ceph_mdsc_free_path(char *path, int len)
{
- if (path)
+ if (!IS_ERR_OR_NULL(path))
__putname(path - (PATH_MAX - 1 - len));
}
/*
* This lock protects the cifs_tcp_ses_list, the list of smb sessions per
* tcp session, and the list of tcon's per smb session. It also protects
- * the reference counters for the server, smb session, and tcon. Finally,
+ * the reference counters for the server, smb session, and tcon. It also
+ * protects some fields in the TCP_Server_Info struct such as dstaddr. Finally,
* changes to the tcon->tidStatus should be done while holding this lock.
* generally the locks should be taken in order tcp_ses_lock before
* tcon->open_file_lock and that before file->file_info_lock since the
cifs_max_pending);
set_credits(server, server->maxReq);
server->maxBuf = le16_to_cpu(rsp->MaxBufSize);
+ /* set up max_read for readpages check */
+ server->max_read = server->maxBuf;
/* even though we do not use raw we might as well set this
accurately, in case we ever find a need for it */
if ((le16_to_cpu(rsp->RawMode) & RAW_ENABLE) == RAW_ENABLE) {
set_credits(server, server->maxReq);
/* probably no need to store and check maxvcs */
server->maxBuf = le32_to_cpu(pSMBr->MaxBufferSize);
+ /* set up max_read for readpages check */
+ server->max_read = server->maxBuf;
server->max_rw = le32_to_cpu(pSMBr->MaxRawSize);
cifs_dbg(NOISY, "Max buf = %d\n", ses->server->maxBuf);
server->capabilities = le32_to_cpu(pSMBr->Capabilities);
return rc;
}
+ spin_lock(&cifs_tcp_ses_lock);
rc = cifs_convert_address((struct sockaddr *)&server->dstaddr, ipaddr,
strlen(ipaddr));
+ spin_unlock(&cifs_tcp_ses_lock);
kfree(ipaddr);
return !rc ? -1 : 0;
spin_lock(&cifs_tcp_ses_lock);
list_for_each(tmp, &ses->tcon_list) {
tcon = list_entry(tmp, struct cifs_tcon, tcon_list);
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ if (tcon->dfs_path)
+ continue;
+#endif
if (!match_tcon(tcon, volume_info))
continue;
++tcon->tc_count;
}
/* check if server can support readpages */
- if (cifs_sb_master_tcon(cifs_sb)->ses->server->maxBuf <
+ if (cifs_sb_master_tcon(cifs_sb)->ses->server->max_read <
PAGE_SIZE + MAX_CIFS_HDR_SIZE)
inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
else
}
struct super_cb_data {
- struct TCP_Server_Info *server;
+ void *data;
struct super_block *sb;
};
-static void super_cb(struct super_block *sb, void *arg)
+static void tcp_super_cb(struct super_block *sb, void *arg)
{
- struct super_cb_data *d = arg;
+ struct super_cb_data *sd = arg;
+ struct TCP_Server_Info *server = sd->data;
struct cifs_sb_info *cifs_sb;
struct cifs_tcon *tcon;
- if (d->sb)
+ if (sd->sb)
return;
cifs_sb = CIFS_SB(sb);
tcon = cifs_sb_master_tcon(cifs_sb);
- if (tcon->ses->server == d->server)
- d->sb = sb;
+ if (tcon->ses->server == server)
+ sd->sb = sb;
}
-struct super_block *cifs_get_tcp_super(struct TCP_Server_Info *server)
+static struct super_block *__cifs_get_super(void (*f)(struct super_block *, void *),
+ void *data)
{
- struct super_cb_data d = {
- .server = server,
+ struct super_cb_data sd = {
+ .data = data,
.sb = NULL,
};
- iterate_supers_type(&cifs_fs_type, super_cb, &d);
+ iterate_supers_type(&cifs_fs_type, f, &sd);
- if (unlikely(!d.sb))
- return ERR_PTR(-ENOENT);
+ if (!sd.sb)
+ return ERR_PTR(-EINVAL);
/*
* Grab an active reference in order to prevent automounts (DFS links)
* of expiring and then freeing up our cifs superblock pointer while
* we're doing failover.
*/
- cifs_sb_active(d.sb);
- return d.sb;
+ cifs_sb_active(sd.sb);
+ return sd.sb;
}
-void cifs_put_tcp_super(struct super_block *sb)
+static void __cifs_put_super(struct super_block *sb)
{
if (!IS_ERR_OR_NULL(sb))
cifs_sb_deactive(sb);
}
+struct super_block *cifs_get_tcp_super(struct TCP_Server_Info *server)
+{
+ return __cifs_get_super(tcp_super_cb, server);
+}
+
+void cifs_put_tcp_super(struct super_block *sb)
+{
+ __cifs_put_super(sb);
+}
+
+#ifdef CONFIG_CIFS_DFS_UPCALL
+static void tcon_super_cb(struct super_block *sb, void *arg)
+{
+ struct super_cb_data *sd = arg;
+ struct cifs_tcon *tcon = sd->data;
+ struct cifs_sb_info *cifs_sb;
+
+ if (sd->sb)
+ return;
+
+ cifs_sb = CIFS_SB(sb);
+ if (tcon->dfs_path && cifs_sb->origin_fullpath &&
+ !strcasecmp(tcon->dfs_path, cifs_sb->origin_fullpath))
+ sd->sb = sb;
+}
+
+static inline struct super_block *cifs_get_tcon_super(struct cifs_tcon *tcon)
+{
+ return __cifs_get_super(tcon_super_cb, tcon);
+}
+
+static inline void cifs_put_tcon_super(struct super_block *sb)
+{
+ __cifs_put_super(sb);
+}
+#else
+static inline struct super_block *cifs_get_tcon_super(struct cifs_tcon *tcon)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline void cifs_put_tcon_super(struct super_block *sb)
+{
+}
+#endif
+
int update_super_prepath(struct cifs_tcon *tcon, const char *prefix,
size_t prefix_len)
{
struct cifs_sb_info *cifs_sb;
int rc = 0;
- sb = cifs_get_tcp_super(tcon->ses->server);
+ sb = cifs_get_tcon_super(tcon);
if (IS_ERR(sb))
return PTR_ERR(sb);
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_USE_PREFIX_PATH;
out:
- cifs_put_tcp_super(sb);
+ cifs_put_tcon_super(sb);
return rc;
}
if (smb3_encryption_required(tcon))
flags |= CIFS_TRANSFORM_REQ;
+ if (!server->ops->new_lease_key)
+ return -EIO;
+
+ server->ops->new_lease_key(pfid);
+
memset(rqst, 0, sizeof(rqst));
resp_buftype[0] = resp_buftype[1] = CIFS_NO_BUFFER;
memset(rsp_iov, 0, sizeof(rsp_iov));
}
rc = SMB2_sess_establish_session(sess_data);
+#ifdef CONFIG_CIFS_DEBUG_DUMP_KEYS
+ if (ses->server->dialect < SMB30_PROT_ID) {
+ cifs_dbg(VFS, "%s: dumping generated SMB2 session keys\n", __func__);
+ /*
+ * The session id is opaque in terms of endianness, so we can't
+ * print it as a long long. we dump it as we got it on the wire
+ */
+ cifs_dbg(VFS, "Session Id %*ph\n", (int)sizeof(ses->Suid),
+ &ses->Suid);
+ cifs_dbg(VFS, "Session Key %*ph\n",
+ SMB2_NTLMV2_SESSKEY_SIZE, ses->auth_key.response);
+ cifs_dbg(VFS, "Signing Key %*ph\n",
+ SMB3_SIGN_KEY_SIZE, ses->auth_key.response);
+ }
+#endif
out:
kfree(ntlmssp_blob);
SMB2_sess_free_buffer(sess_data);
return rc;
if (memcmp(server_response_sig, shdr->Signature, SMB2_SIGNATURE_SIZE)) {
- dump_stack();
- cifs_dbg(VFS, "sign fail cmd 0x%x message id 0x%llx\n", shdr->Command, shdr->MessageId);
+ cifs_dbg(VFS, "sign fail cmd 0x%x message id 0x%llx\n",
+ shdr->Command, shdr->MessageId);
return -EACCES;
} else
return 0;
return -ENOMEM;
(*argv)[(*argc)++] = 0;
++pat_ptr;
+ if (!(*pat_ptr))
+ return -ENOMEM;
}
/* Repeat as long as we have more pattern to process and more output
* This function creates a file in debugfs with the given name that
* contains the value of the variable @value. If the @mode variable is so
* set, it can be read from, and written to.
- *
- * This function will return a pointer to a dentry if it succeeds. This
- * pointer must be passed to the debugfs_remove() function when the file is
- * to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.) If an error occurs, ERR_PTR(-ERROR) will be
- * returned.
- *
- * If debugfs is not enabled in the kernel, the value ERR_PTR(-ENODEV) will
- * be returned.
*/
-struct dentry *debugfs_create_u32(const char *name, umode_t mode,
- struct dentry *parent, u32 *value)
+void debugfs_create_u32(const char *name, umode_t mode, struct dentry *parent,
+ u32 *value)
{
- return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_u32,
+ debugfs_create_mode_unsafe(name, mode, parent, value, &fops_u32,
&fops_u32_ro, &fops_u32_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_u32);
}
}
- sbi->pbr_bh = NULL;
return 0;
}
{
int i;
- brelse(sbi->pbr_bh);
-
for (i = 0; i < sbi->map_sectors; i++)
__brelse(sbi->vol_amap[i]);
__printf(3, 4) __cold;
void exfat_get_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
u8 tz, __le16 time, __le16 date, u8 time_ms);
+void exfat_truncate_atime(struct timespec64 *ts);
void exfat_set_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
u8 *tz, __le16 *time, __le16 *date, u8 *time_ms);
unsigned short exfat_calc_chksum_2byte(void *data, int len,
struct exfat_inode_info *ei = EXFAT_I(inode);
generic_fillattr(inode, stat);
+ exfat_truncate_atime(&stat->atime);
stat->result_mask |= STATX_BTIME;
stat->btime.tv_sec = ei->i_crtime.tv_sec;
stat->btime.tv_nsec = ei->i_crtime.tv_nsec;
}
setattr_copy(inode, attr);
+ exfat_truncate_atime(&inode->i_atime);
mark_inode_dirty(inode);
out:
if (time_ms) {
ts->tv_sec += time_ms / 100;
ts->tv_nsec = (time_ms % 100) * 10 * NSEC_PER_MSEC;
- }
+ } else
+ ts->tv_nsec = 0;
if (tz & EXFAT_TZ_VALID)
/* Adjust timezone to UTC0. */
*tz = EXFAT_TZ_VALID;
}
+/*
+ * The timestamp for access_time has double seconds granularity.
+ * (There is no 10msIncrement field for access_time unlike create/modify_time)
+ * atime also has only a 2-second resolution.
+ */
+void exfat_truncate_atime(struct timespec64 *ts)
+{
+ ts->tv_sec = round_down(ts->tv_sec, 2);
+ ts->tv_nsec = 0;
+}
+
unsigned short exfat_calc_chksum_2byte(void *data, int len,
unsigned short chksum, int type)
{
inode_inc_iversion(inode);
inode->i_mtime = inode->i_atime = inode->i_ctime =
EXFAT_I(inode)->i_crtime = current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
d_instantiate(dentry, inode);
inode_inc_iversion(dir);
dir->i_mtime = dir->i_atime = current_time(dir);
+ exfat_truncate_atime(&dir->i_atime);
if (IS_DIRSYNC(dir))
exfat_sync_inode(dir);
else
clear_nlink(inode);
inode->i_mtime = inode->i_atime = current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
exfat_unhash_inode(inode);
exfat_d_version_set(dentry, inode_query_iversion(dir));
unlock:
inode_inc_iversion(inode);
inode->i_mtime = inode->i_atime = inode->i_ctime =
EXFAT_I(inode)->i_crtime = current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
d_instantiate(dentry, inode);
inode_inc_iversion(dir);
dir->i_mtime = dir->i_atime = current_time(dir);
+ exfat_truncate_atime(&dir->i_atime);
if (IS_DIRSYNC(dir))
exfat_sync_inode(dir);
else
clear_nlink(inode);
inode->i_mtime = inode->i_atime = current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
exfat_unhash_inode(inode);
exfat_d_version_set(dentry, inode_query_iversion(dir));
unlock:
inode_inc_iversion(new_dir);
new_dir->i_ctime = new_dir->i_mtime = new_dir->i_atime =
EXFAT_I(new_dir)->i_crtime = current_time(new_dir);
+ exfat_truncate_atime(&new_dir->i_atime);
if (IS_DIRSYNC(new_dir))
exfat_sync_inode(new_dir);
else
sync_blockdev(sb->s_bdev);
exfat_set_vol_flags(sb, VOL_CLEAN);
exfat_free_bitmap(sbi);
+ brelse(sbi->pbr_bh);
mutex_unlock(&sbi->s_lock);
call_rcu(&sbi->rcu, exfat_delayed_free);
int exfat_set_vol_flags(struct super_block *sb, unsigned short new_flag)
{
struct exfat_sb_info *sbi = EXFAT_SB(sb);
- struct pbr64 *bpb;
+ struct pbr64 *bpb = (struct pbr64 *)sbi->pbr_bh->b_data;
bool sync = 0;
/* flags are not changed */
if (sb_rdonly(sb))
return 0;
- if (!sbi->pbr_bh) {
- sbi->pbr_bh = sb_bread(sb, 0);
- if (!sbi->pbr_bh) {
- exfat_msg(sb, KERN_ERR, "failed to read boot sector");
- return -ENOMEM;
- }
- }
-
- bpb = (struct pbr64 *)sbi->pbr_bh->b_data;
bpb->bsx.vol_flags = cpu_to_le16(new_flag);
if (new_flag == VOL_DIRTY && !buffer_dirty(sbi->pbr_bh))
seq_puts(m, ",iocharset=utf8");
else if (sbi->nls_io)
seq_printf(m, ",iocharset=%s", sbi->nls_io->charset);
- seq_printf(m, ",bps=%ld", sb->s_blocksize);
if (opts->errors == EXFAT_ERRORS_CONT)
seq_puts(m, ",errors=continue");
else if (opts->errors == EXFAT_ERRORS_PANIC)
exfat_save_attr(inode, ATTR_SUBDIR);
inode->i_mtime = inode->i_atime = inode->i_ctime = ei->i_crtime =
current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
exfat_cache_init_inode(inode);
return 0;
}
-static struct pbr *exfat_read_pbr_with_logical_sector(struct super_block *sb,
- struct buffer_head **prev_bh)
+static struct pbr *exfat_read_pbr_with_logical_sector(struct super_block *sb)
{
- struct pbr *p_pbr = (struct pbr *) (*prev_bh)->b_data;
+ struct exfat_sb_info *sbi = EXFAT_SB(sb);
+ struct pbr *p_pbr = (struct pbr *) (sbi->pbr_bh)->b_data;
unsigned short logical_sect = 0;
logical_sect = 1 << p_pbr->bsx.f64.sect_size_bits;
}
if (logical_sect > sb->s_blocksize) {
- struct buffer_head *bh = NULL;
-
- __brelse(*prev_bh);
- *prev_bh = NULL;
+ brelse(sbi->pbr_bh);
+ sbi->pbr_bh = NULL;
if (!sb_set_blocksize(sb, logical_sect)) {
exfat_msg(sb, KERN_ERR,
"unable to set blocksize %u", logical_sect);
return NULL;
}
- bh = sb_bread(sb, 0);
- if (!bh) {
+ sbi->pbr_bh = sb_bread(sb, 0);
+ if (!sbi->pbr_bh) {
exfat_msg(sb, KERN_ERR,
"unable to read boot sector (logical sector size = %lu)",
sb->s_blocksize);
return NULL;
}
- *prev_bh = bh;
- p_pbr = (struct pbr *) bh->b_data;
+ p_pbr = (struct pbr *)sbi->pbr_bh->b_data;
}
return p_pbr;
}
int ret;
struct pbr *p_pbr;
struct pbr64 *p_bpb;
- struct buffer_head *bh;
struct exfat_sb_info *sbi = EXFAT_SB(sb);
/* set block size to read super block */
sb_min_blocksize(sb, 512);
/* read boot sector */
- bh = sb_bread(sb, 0);
- if (!bh) {
+ sbi->pbr_bh = sb_bread(sb, 0);
+ if (!sbi->pbr_bh) {
exfat_msg(sb, KERN_ERR, "unable to read boot sector");
return -EIO;
}
/* PRB is read */
- p_pbr = (struct pbr *)bh->b_data;
+ p_pbr = (struct pbr *)sbi->pbr_bh->b_data;
/* check the validity of PBR */
if (le16_to_cpu((p_pbr->signature)) != PBR_SIGNATURE) {
/* check logical sector size */
- p_pbr = exfat_read_pbr_with_logical_sector(sb, &bh);
+ p_pbr = exfat_read_pbr_with_logical_sector(sb);
if (!p_pbr) {
ret = -EIO;
goto free_bh;
free_upcase_table:
exfat_free_upcase_table(sbi);
free_bh:
- brelse(bh);
+ brelse(sbi->pbr_bh);
return ret;
}
if (opts->discard) {
struct request_queue *q = bdev_get_queue(sb->s_bdev);
- if (!blk_queue_discard(q))
+ if (!blk_queue_discard(q)) {
exfat_msg(sb, KERN_WARNING,
"mounting with \"discard\" option, but the device does not support discard");
- opts->discard = 0;
+ opts->discard = 0;
+ }
}
sb->s_flags |= SB_NODIRATIME;
sb->s_magic = EXFAT_SUPER_MAGIC;
sb->s_op = &exfat_sops;
- sb->s_time_gran = 1;
+ sb->s_time_gran = 10 * NSEC_PER_MSEC;
sb->s_time_min = EXFAT_MIN_TIMESTAMP_SECS;
sb->s_time_max = EXFAT_MAX_TIMESTAMP_SECS;
free_table:
exfat_free_upcase_table(sbi);
exfat_free_bitmap(sbi);
+ brelse(sbi->pbr_bh);
check_nls_io:
unload_nls(sbi->nls_io);
module_init(init_exfat_fs);
module_exit(exit_exfat_fs);
+MODULE_ALIAS_FS("exfat");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("exFAT filesystem support");
MODULE_AUTHOR("Samsung Electronics Co., Ltd.");
* Read the bitmap for a given block_group,and validate the
* bits for block/inode/inode tables are set in the bitmaps
*
- * Return buffer_head on success or NULL in case of failure.
+ * Return buffer_head on success or an ERR_PTR in case of failure.
*/
struct buffer_head *
ext4_read_block_bitmap_nowait(struct super_block *sb, ext4_group_t block_group)
return ERR_PTR(err);
}
-/* Returns 0 on success, 1 on error */
+/* Returns 0 on success, -errno on error */
int ext4_wait_block_bitmap(struct super_block *sb, ext4_group_t block_group,
struct buffer_head *bh)
{
if (inode && inode_needs_sync(inode)) {
sync_dirty_buffer(bh);
if (buffer_req(bh) && !buffer_uptodate(bh)) {
- struct ext4_super_block *es;
-
- es = EXT4_SB(inode->i_sb)->s_es;
ext4_error_inode_err(inode, where, line,
bh->b_blocknr, EIO,
"IO error syncing itable block");
(unsigned long long)map->m_lblk, map_len);
sbi = EXT4_SB(inode->i_sb);
- eof_block = (inode->i_size + inode->i_sb->s_blocksize - 1) >>
- inode->i_sb->s_blocksize_bits;
+ eof_block = (EXT4_I(inode)->i_disksize + inode->i_sb->s_blocksize - 1)
+ >> inode->i_sb->s_blocksize_bits;
if (eof_block < map->m_lblk + map_len)
eof_block = map->m_lblk + map_len;
__func__, inode->i_ino,
(unsigned long long)map->m_lblk, map->m_len);
- eof_block = (inode->i_size + inode->i_sb->s_blocksize - 1) >>
- inode->i_sb->s_blocksize_bits;
+ eof_block = (EXT4_I(inode)->i_disksize + inode->i_sb->s_blocksize - 1)
+ >> inode->i_sb->s_blocksize_bits;
if (eof_block < map->m_lblk + map->m_len)
eof_block = map->m_lblk + map->m_len;
/*
* Read the inode allocation bitmap for a given block_group, reading
* into the specified slot in the superblock's bitmap cache.
*
- * Return buffer_head of bitmap on success or NULL.
+ * Return buffer_head of bitmap on success, or an ERR_PTR on error.
*/
static struct buffer_head *
ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
* block has been written back to disk. (Yes, these values are
* somewhat arbitrary...)
*/
-#define RECENTCY_MIN 5
+#define RECENTCY_MIN 60
#define RECENTCY_DIRTY 300
static int recently_deleted(struct super_block *sb, ext4_group_t group, int ino)
bool keep_towrite = false;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) {
- ext4_invalidatepage(page, 0, PAGE_SIZE);
+ inode->i_mapping->a_ops->invalidatepage(page, 0, PAGE_SIZE);
unlock_page(page);
return -EIO;
}
if (end > table)
end = table;
while (b <= end)
- sb_breadahead(sb, b++);
+ sb_breadahead_unmovable(sb, b++);
}
/*
int free;
free = e4b->bd_info->bb_free;
- BUG_ON(free <= 0);
+ if (WARN_ON(free <= 0))
+ return;
i = e4b->bd_info->bb_first_free;
}
mb_find_extent(e4b, i, ac->ac_g_ex.fe_len, &ex);
- BUG_ON(ex.fe_len <= 0);
+ if (WARN_ON(ex.fe_len <= 0))
+ break;
if (free < ex.fe_len) {
ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
"%d free clusters as per "
{
va_list args;
struct va_format vaf;
- struct ext4_super_block *es;
struct inode *inode = file_inode(file);
char pathname[80], *path;
return;
trace_ext4_error(inode->i_sb, function, line);
- es = EXT4_SB(inode->i_sb)->s_es;
if (ext4_error_ratelimit(inode->i_sb)) {
path = file_path(file, pathname, sizeof(pathname));
if (IS_ERR(path))
/* Pre-read the descriptors into the buffer cache */
for (i = 0; i < db_count; i++) {
block = descriptor_loc(sb, logical_sb_block, i);
- sb_breadahead(sb, block);
+ sb_breadahead_unmovable(sb, block);
}
for (i = 0; i < db_count; i++) {
struct hrtimer timer;
struct timespec64 ts;
enum hrtimer_mode mode;
- u32 seq_offset;
};
struct io_accept {
struct file *file;
u64 addr;
int flags;
- unsigned count;
+ u32 count;
};
struct io_rw {
REQ_F_FORCE_ASYNC_BIT = IOSQE_ASYNC_BIT,
REQ_F_BUFFER_SELECT_BIT = IOSQE_BUFFER_SELECT_BIT,
+ REQ_F_LINK_HEAD_BIT,
REQ_F_LINK_NEXT_BIT,
REQ_F_FAIL_LINK_BIT,
REQ_F_INFLIGHT_BIT,
/* IOSQE_BUFFER_SELECT */
REQ_F_BUFFER_SELECT = BIT(REQ_F_BUFFER_SELECT_BIT),
+ /* head of a link */
+ REQ_F_LINK_HEAD = BIT(REQ_F_LINK_HEAD_BIT),
/* already grabbed next link */
REQ_F_LINK_NEXT = BIT(REQ_F_LINK_NEXT_BIT),
/* fail rest of links */
{
struct io_ring_ctx *ctx = req->ctx;
- return req->sequence != ctx->cached_cq_tail + ctx->cached_sq_dropped
- + atomic_read(&ctx->cached_cq_overflow);
+ return req->sequence != ctx->cached_cq_tail
+ + atomic_read(&ctx->cached_cq_overflow);
}
static inline bool req_need_defer(struct io_kiocb *req)
if (ret != -1) {
io_cqring_fill_event(req, -ECANCELED);
io_commit_cqring(ctx);
- req->flags &= ~REQ_F_LINK;
+ req->flags &= ~REQ_F_LINK_HEAD;
io_put_req(req);
return true;
}
list_del_init(&req->link_list);
if (!list_empty(&nxt->link_list))
- nxt->flags |= REQ_F_LINK;
+ nxt->flags |= REQ_F_LINK_HEAD;
*nxtptr = nxt;
break;
}
}
/*
- * Called if REQ_F_LINK is set, and we fail the head request
+ * Called if REQ_F_LINK_HEAD is set, and we fail the head request
*/
static void io_fail_links(struct io_kiocb *req)
{
static void io_req_find_next(struct io_kiocb *req, struct io_kiocb **nxt)
{
- if (likely(!(req->flags & REQ_F_LINK)))
+ if (likely(!(req->flags & REQ_F_LINK_HEAD)))
return;
/*
static inline bool io_req_multi_free(struct req_batch *rb, struct io_kiocb *req)
{
- if ((req->flags & REQ_F_LINK) || io_is_fallback_req(req))
+ if ((req->flags & REQ_F_LINK_HEAD) || io_is_fallback_req(req))
return false;
if (!(req->flags & REQ_F_FIXED_FILE) || req->io)
req->result = 0;
io_size = ret;
- if (req->flags & REQ_F_LINK)
+ if (req->flags & REQ_F_LINK_HEAD)
req->result = io_size;
/*
req->result = 0;
io_size = ret;
- if (req->flags & REQ_F_LINK)
+ if (req->flags & REQ_F_LINK_HEAD)
req->result = io_size;
/*
return false;
if (!io_file_supports_async(file))
return true;
- return !(file->f_mode & O_NONBLOCK);
+ return !(file->f_flags & O_NONBLOCK);
}
static int io_splice(struct io_kiocb *req, bool force_nonblock)
return 1;
}
+static bool io_poll_rewait(struct io_kiocb *req, struct io_poll_iocb *poll)
+ __acquires(&req->ctx->completion_lock)
+{
+ struct io_ring_ctx *ctx = req->ctx;
+
+ if (!req->result && !READ_ONCE(poll->canceled)) {
+ struct poll_table_struct pt = { ._key = poll->events };
+
+ req->result = vfs_poll(req->file, &pt) & poll->events;
+ }
+
+ spin_lock_irq(&ctx->completion_lock);
+ if (!req->result && !READ_ONCE(poll->canceled)) {
+ add_wait_queue(poll->head, &poll->wait);
+ return true;
+ }
+
+ return false;
+}
+
static void io_async_task_func(struct callback_head *cb)
{
struct io_kiocb *req = container_of(cb, struct io_kiocb, task_work);
struct async_poll *apoll = req->apoll;
struct io_ring_ctx *ctx = req->ctx;
+ bool canceled;
trace_io_uring_task_run(req->ctx, req->opcode, req->user_data);
- WARN_ON_ONCE(!list_empty(&req->apoll->poll.wait.entry));
+ if (io_poll_rewait(req, &apoll->poll)) {
+ spin_unlock_irq(&ctx->completion_lock);
+ return;
+ }
- if (hash_hashed(&req->hash_node)) {
- spin_lock_irq(&ctx->completion_lock);
+ if (hash_hashed(&req->hash_node))
hash_del(&req->hash_node);
- spin_unlock_irq(&ctx->completion_lock);
+
+ canceled = READ_ONCE(apoll->poll.canceled);
+ if (canceled) {
+ io_cqring_fill_event(req, -ECANCELED);
+ io_commit_cqring(ctx);
}
+ spin_unlock_irq(&ctx->completion_lock);
+
/* restore ->work in case we need to retry again */
memcpy(&req->work, &apoll->work, sizeof(req->work));
+ if (canceled) {
+ kfree(apoll);
+ io_cqring_ev_posted(ctx);
+ req_set_fail_links(req);
+ io_double_put_req(req);
+ return;
+ }
+
__set_current_state(TASK_RUNNING);
mutex_lock(&ctx->uring_lock);
__io_queue_sqe(req, NULL);
static bool io_poll_remove_one(struct io_kiocb *req)
{
+ struct async_poll *apoll = NULL;
bool do_complete;
if (req->opcode == IORING_OP_POLL_ADD) {
do_complete = __io_poll_remove_one(req, &req->poll);
} else {
+ apoll = req->apoll;
/* non-poll requests have submit ref still */
do_complete = __io_poll_remove_one(req, &req->apoll->poll);
if (do_complete)
hash_del(&req->hash_node);
+ if (do_complete && apoll) {
+ /*
+ * restore ->work because we need to call io_req_work_drop_env.
+ */
+ memcpy(&req->work, &apoll->work, sizeof(req->work));
+ kfree(apoll);
+ }
+
if (do_complete) {
io_cqring_fill_event(req, -ECANCELED);
io_commit_cqring(req->ctx);
{
struct hlist_node *tmp;
struct io_kiocb *req;
- int i;
+ int posted = 0, i;
spin_lock_irq(&ctx->completion_lock);
for (i = 0; i < (1U << ctx->cancel_hash_bits); i++) {
list = &ctx->cancel_hash[i];
hlist_for_each_entry_safe(req, tmp, list, hash_node)
- io_poll_remove_one(req);
+ posted += io_poll_remove_one(req);
}
spin_unlock_irq(&ctx->completion_lock);
- io_cqring_ev_posted(ctx);
+ if (posted)
+ io_cqring_ev_posted(ctx);
}
static int io_poll_cancel(struct io_ring_ctx *ctx, __u64 sqe_addr)
struct io_ring_ctx *ctx = req->ctx;
struct io_poll_iocb *poll = &req->poll;
- if (!req->result && !READ_ONCE(poll->canceled)) {
- struct poll_table_struct pt = { ._key = poll->events };
-
- req->result = vfs_poll(req->file, &pt) & poll->events;
- }
-
- spin_lock_irq(&ctx->completion_lock);
- if (!req->result && !READ_ONCE(poll->canceled)) {
- add_wait_queue(poll->head, &poll->wait);
+ if (io_poll_rewait(req, poll)) {
spin_unlock_irq(&ctx->completion_lock);
return;
}
+
hash_del(&req->hash_node);
io_poll_complete(req, req->result, 0);
req->flags |= REQ_F_COMP_LOCKED;
static int io_timeout(struct io_kiocb *req)
{
- unsigned count;
struct io_ring_ctx *ctx = req->ctx;
struct io_timeout_data *data;
struct list_head *entry;
unsigned span = 0;
+ u32 count = req->timeout.count;
+ u32 seq = req->sequence;
data = &req->io->timeout;
* timeout event to be satisfied. If it isn't set, then this is
* a pure timeout request, sequence isn't used.
*/
- count = req->timeout.count;
if (!count) {
req->flags |= REQ_F_TIMEOUT_NOSEQ;
spin_lock_irq(&ctx->completion_lock);
goto add;
}
- req->sequence = ctx->cached_sq_head + count - 1;
- data->seq_offset = count;
+ req->sequence = seq + count;
/*
* Insertion sort, ensuring the first entry in the list is always
spin_lock_irq(&ctx->completion_lock);
list_for_each_prev(entry, &ctx->timeout_list) {
struct io_kiocb *nxt = list_entry(entry, struct io_kiocb, list);
- unsigned nxt_sq_head;
+ unsigned nxt_seq;
long long tmp, tmp_nxt;
- u32 nxt_offset = nxt->io->timeout.seq_offset;
+ u32 nxt_offset = nxt->timeout.count;
if (nxt->flags & REQ_F_TIMEOUT_NOSEQ)
continue;
/*
- * Since cached_sq_head + count - 1 can overflow, use type long
+ * Since seq + count can overflow, use type long
* long to store it.
*/
- tmp = (long long)ctx->cached_sq_head + count - 1;
- nxt_sq_head = nxt->sequence - nxt_offset + 1;
- tmp_nxt = (long long)nxt_sq_head + nxt_offset - 1;
+ tmp = (long long)seq + count;
+ nxt_seq = nxt->sequence - nxt_offset;
+ tmp_nxt = (long long)nxt_seq + nxt_offset;
/*
* cached_sq_head may overflow, and it will never overflow twice
* once there is some timeout req still be valid.
*/
- if (ctx->cached_sq_head < nxt_sq_head)
+ if (seq < nxt_seq)
tmp += UINT_MAX;
if (tmp > tmp_nxt)
{
struct io_kiocb *nxt;
- if (!(req->flags & REQ_F_LINK))
+ if (!(req->flags & REQ_F_LINK_HEAD))
return NULL;
/* for polled retry, if flag is set, we already went through here */
if (req->flags & REQ_F_POLLED)
io_queue_sqe(req, NULL);
}
-#define SQE_VALID_FLAGS (IOSQE_FIXED_FILE|IOSQE_IO_DRAIN|IOSQE_IO_LINK| \
- IOSQE_IO_HARDLINK | IOSQE_ASYNC | \
- IOSQE_BUFFER_SELECT)
-
-static bool io_submit_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe,
+static int io_submit_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe,
struct io_submit_state *state, struct io_kiocb **link)
{
struct io_ring_ctx *ctx = req->ctx;
- unsigned int sqe_flags;
- int ret, id, fd;
-
- sqe_flags = READ_ONCE(sqe->flags);
-
- /* enforce forwards compatibility on users */
- if (unlikely(sqe_flags & ~SQE_VALID_FLAGS)) {
- ret = -EINVAL;
- goto err_req;
- }
-
- if ((sqe_flags & IOSQE_BUFFER_SELECT) &&
- !io_op_defs[req->opcode].buffer_select) {
- ret = -EOPNOTSUPP;
- goto err_req;
- }
-
- id = READ_ONCE(sqe->personality);
- if (id) {
- req->work.creds = idr_find(&ctx->personality_idr, id);
- if (unlikely(!req->work.creds)) {
- ret = -EINVAL;
- goto err_req;
- }
- get_cred(req->work.creds);
- }
-
- /* same numerical values with corresponding REQ_F_*, safe to copy */
- req->flags |= sqe_flags & (IOSQE_IO_DRAIN | IOSQE_IO_HARDLINK |
- IOSQE_ASYNC | IOSQE_FIXED_FILE |
- IOSQE_BUFFER_SELECT);
-
- fd = READ_ONCE(sqe->fd);
- ret = io_req_set_file(state, req, fd, sqe_flags);
- if (unlikely(ret)) {
-err_req:
- io_cqring_add_event(req, ret);
- io_double_put_req(req);
- return false;
- }
+ int ret;
/*
* If we already have a head request, queue this one for async
* next after the link request. The last one is done via
* drain_next flag to persist the effect across calls.
*/
- if (sqe_flags & IOSQE_IO_DRAIN) {
+ if (req->flags & REQ_F_IO_DRAIN) {
head->flags |= REQ_F_IO_DRAIN;
ctx->drain_next = 1;
}
- if (io_alloc_async_ctx(req)) {
- ret = -EAGAIN;
- goto err_req;
- }
+ if (io_alloc_async_ctx(req))
+ return -EAGAIN;
ret = io_req_defer_prep(req, sqe);
if (ret) {
/* fail even hard links since we don't submit */
head->flags |= REQ_F_FAIL_LINK;
- goto err_req;
+ return ret;
}
trace_io_uring_link(ctx, req, head);
list_add_tail(&req->link_list, &head->link_list);
/* last request of a link, enqueue the link */
- if (!(sqe_flags & (IOSQE_IO_LINK|IOSQE_IO_HARDLINK))) {
+ if (!(req->flags & (REQ_F_LINK | REQ_F_HARDLINK))) {
io_queue_link_head(head);
*link = NULL;
}
} else {
if (unlikely(ctx->drain_next)) {
req->flags |= REQ_F_IO_DRAIN;
- req->ctx->drain_next = 0;
+ ctx->drain_next = 0;
}
- if (sqe_flags & (IOSQE_IO_LINK|IOSQE_IO_HARDLINK)) {
- req->flags |= REQ_F_LINK;
+ if (req->flags & (REQ_F_LINK | REQ_F_HARDLINK)) {
+ req->flags |= REQ_F_LINK_HEAD;
INIT_LIST_HEAD(&req->link_list);
- if (io_alloc_async_ctx(req)) {
- ret = -EAGAIN;
- goto err_req;
- }
+ if (io_alloc_async_ctx(req))
+ return -EAGAIN;
+
ret = io_req_defer_prep(req, sqe);
if (ret)
req->flags |= REQ_F_FAIL_LINK;
}
}
- return true;
+ return 0;
}
/*
ctx->cached_sq_head++;
}
-static void io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
- const struct io_uring_sqe *sqe)
+#define SQE_VALID_FLAGS (IOSQE_FIXED_FILE|IOSQE_IO_DRAIN|IOSQE_IO_LINK| \
+ IOSQE_IO_HARDLINK | IOSQE_ASYNC | \
+ IOSQE_BUFFER_SELECT)
+
+static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
+ const struct io_uring_sqe *sqe,
+ struct io_submit_state *state, bool async)
{
+ unsigned int sqe_flags;
+ int id, fd;
+
/*
* All io need record the previous position, if LINK vs DARIN,
* it can be used to mark the position of the first IO in the
* link list.
*/
- req->sequence = ctx->cached_sq_head;
+ req->sequence = ctx->cached_sq_head - ctx->cached_sq_dropped;
req->opcode = READ_ONCE(sqe->opcode);
req->user_data = READ_ONCE(sqe->user_data);
req->io = NULL;
refcount_set(&req->refs, 2);
req->task = NULL;
req->result = 0;
+ req->needs_fixed_file = async;
INIT_IO_WORK(&req->work, io_wq_submit_work);
+
+ if (unlikely(req->opcode >= IORING_OP_LAST))
+ return -EINVAL;
+
+ if (io_op_defs[req->opcode].needs_mm && !current->mm) {
+ if (unlikely(!mmget_not_zero(ctx->sqo_mm)))
+ return -EFAULT;
+ use_mm(ctx->sqo_mm);
+ }
+
+ sqe_flags = READ_ONCE(sqe->flags);
+ /* enforce forwards compatibility on users */
+ if (unlikely(sqe_flags & ~SQE_VALID_FLAGS))
+ return -EINVAL;
+
+ if ((sqe_flags & IOSQE_BUFFER_SELECT) &&
+ !io_op_defs[req->opcode].buffer_select)
+ return -EOPNOTSUPP;
+
+ id = READ_ONCE(sqe->personality);
+ if (id) {
+ req->work.creds = idr_find(&ctx->personality_idr, id);
+ if (unlikely(!req->work.creds))
+ return -EINVAL;
+ get_cred(req->work.creds);
+ }
+
+ /* same numerical values with corresponding REQ_F_*, safe to copy */
+ req->flags |= sqe_flags & (IOSQE_IO_DRAIN | IOSQE_IO_HARDLINK |
+ IOSQE_ASYNC | IOSQE_FIXED_FILE |
+ IOSQE_BUFFER_SELECT | IOSQE_IO_LINK);
+
+ fd = READ_ONCE(sqe->fd);
+ return io_req_set_file(state, req, fd, sqe_flags);
}
static int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr,
- struct file *ring_file, int ring_fd,
- struct mm_struct **mm, bool async)
+ struct file *ring_file, int ring_fd, bool async)
{
struct io_submit_state state, *statep = NULL;
struct io_kiocb *link = NULL;
int i, submitted = 0;
- bool mm_fault = false;
/* if we have a backlog and couldn't flush it all, return BUSY */
if (test_bit(0, &ctx->sq_check_overflow)) {
break;
}
- io_init_req(ctx, req, sqe);
+ err = io_init_req(ctx, req, sqe, statep, async);
io_consume_sqe(ctx);
/* will complete beyond this point, count as submitted */
submitted++;
- if (unlikely(req->opcode >= IORING_OP_LAST)) {
- err = -EINVAL;
+ if (unlikely(err)) {
fail_req:
io_cqring_add_event(req, err);
io_double_put_req(req);
break;
}
- if (io_op_defs[req->opcode].needs_mm && !*mm) {
- mm_fault = mm_fault || !mmget_not_zero(ctx->sqo_mm);
- if (unlikely(mm_fault)) {
- err = -EFAULT;
- goto fail_req;
- }
- use_mm(ctx->sqo_mm);
- *mm = ctx->sqo_mm;
- }
-
- req->needs_fixed_file = async;
trace_io_uring_submit_sqe(ctx, req->opcode, req->user_data,
true, async);
- if (!io_submit_sqe(req, sqe, statep, &link))
- break;
+ err = io_submit_sqe(req, sqe, statep, &link);
+ if (err)
+ goto fail_req;
}
if (unlikely(submitted != nr)) {
return submitted;
}
+static inline void io_sq_thread_drop_mm(struct io_ring_ctx *ctx)
+{
+ struct mm_struct *mm = current->mm;
+
+ if (mm) {
+ unuse_mm(mm);
+ mmput(mm);
+ }
+}
+
static int io_sq_thread(void *data)
{
struct io_ring_ctx *ctx = data;
- struct mm_struct *cur_mm = NULL;
const struct cred *old_cred;
mm_segment_t old_fs;
DEFINE_WAIT(wait);
* adding ourselves to the waitqueue, as the unuse/drop
* may sleep.
*/
- if (cur_mm) {
- unuse_mm(cur_mm);
- mmput(cur_mm);
- cur_mm = NULL;
- }
+ io_sq_thread_drop_mm(ctx);
/*
* We're polling. If we're within the defined idle
}
mutex_lock(&ctx->uring_lock);
- ret = io_submit_sqes(ctx, to_submit, NULL, -1, &cur_mm, true);
+ ret = io_submit_sqes(ctx, to_submit, NULL, -1, true);
mutex_unlock(&ctx->uring_lock);
timeout = jiffies + ctx->sq_thread_idle;
}
task_work_run();
set_fs(old_fs);
- if (cur_mm) {
- unuse_mm(cur_mm);
- mmput(cur_mm);
- }
+ io_sq_thread_drop_mm(ctx);
revert_creds(old_cred);
kthread_parkme();
wake_up(&ctx->sqo_wait);
submitted = to_submit;
} else if (to_submit) {
- struct mm_struct *cur_mm;
-
mutex_lock(&ctx->uring_lock);
- /* already have mm, so io_submit_sqes() won't try to grab it */
- cur_mm = ctx->sqo_mm;
- submitted = io_submit_sqes(ctx, to_submit, f.file, fd,
- &cur_mm, false);
+ submitted = io_submit_sqes(ctx, to_submit, f.file, fd, false);
mutex_unlock(&ctx->uring_lock);
if (submitted != to_submit)
goto lookup_again;
}
+ spin_unlock(&ino->i_lock);
first = true;
status = nfs4_select_rw_stateid(ctx->state,
iomode == IOMODE_RW ? FMODE_WRITE : FMODE_READ,
trace_pnfs_update_layout(ino, pos, count,
iomode, lo, lseg,
PNFS_UPDATE_LAYOUT_INVALID_OPEN);
- spin_unlock(&ino->i_lock);
nfs4_schedule_stateid_recovery(server, ctx->state);
pnfs_clear_first_layoutget(lo);
pnfs_put_layout_hdr(lo);
goto lookup_again;
}
+ spin_lock(&ino->i_lock);
} else {
nfs4_stateid_copy(&stateid, &lo->plh_stateid);
}
container_of(work, struct nfsd4_callback, cb_work);
struct nfs4_client *clp = cb->cb_clp;
struct rpc_clnt *clnt;
+ int flags;
if (cb->cb_need_restart) {
cb->cb_need_restart = false;
}
cb->cb_msg.rpc_cred = clp->cl_cb_cred;
- rpc_call_async(clnt, &cb->cb_msg, RPC_TASK_SOFT | RPC_TASK_SOFTCONN,
+ flags = clp->cl_minorversion ? RPC_TASK_NOCONNECT : RPC_TASK_SOFTCONN;
+ rpc_call_async(clnt, &cb->cb_msg, RPC_TASK_SOFT | flags,
cb->cb_ops ? &nfsd4_cb_ops : &nfsd4_cb_probe_ops, cb);
}
if (!nbl) {
nbl= kmalloc(sizeof(*nbl), GFP_KERNEL);
if (nbl) {
+ INIT_LIST_HEAD(&nbl->nbl_list);
+ INIT_LIST_HEAD(&nbl->nbl_lru);
fh_copy_shallow(&nbl->nbl_fh, fh);
locks_init_lock(&nbl->nbl_lock);
nfsd4_init_cb(&nbl->nbl_cb, lo->lo_owner.so_client,
loff_t *ppos)
{
int bytes_left;
- ssize_t writelen;
char *lvb_buf;
struct inode *inode = file_inode(filp);
if (*ppos >= i_size_read(inode))
return -ENOSPC;
+ /* don't write past the lvb */
+ if (count > i_size_read(inode) - *ppos)
+ count = i_size_read(inode) - *ppos;
+
if (!count)
return 0;
if (!access_ok(buf, count))
return -EFAULT;
- /* don't write past the lvb */
- if ((count + *ppos) > i_size_read(inode))
- writelen = i_size_read(inode) - *ppos;
- else
- writelen = count - *ppos;
-
- lvb_buf = kmalloc(writelen, GFP_NOFS);
+ lvb_buf = kmalloc(count, GFP_NOFS);
if (!lvb_buf)
return -ENOMEM;
- bytes_left = copy_from_user(lvb_buf, buf, writelen);
- writelen -= bytes_left;
- if (writelen)
- user_dlm_write_lvb(inode, lvb_buf, writelen);
+ bytes_left = copy_from_user(lvb_buf, buf, count);
+ count -= bytes_left;
+ if (count)
+ user_dlm_write_lvb(inode, lvb_buf, count);
kfree(lvb_buf);
- *ppos = *ppos + writelen;
- mlog(0, "wrote %zd bytes\n", writelen);
- return writelen;
+ *ppos = *ppos + count;
+ mlog(0, "wrote %zu bytes\n", count);
+ return count;
}
static void dlmfs_init_once(void *foo)
child = copy_tree(last_source, last_source->mnt.mnt_root, type);
if (IS_ERR(child))
return PTR_ERR(child);
+ read_seqlock_excl(&mount_lock);
mnt_set_mountpoint(m, mp, child);
+ if (m->mnt_master != dest_master)
+ SET_MNT_MARK(m->mnt_master);
+ read_sequnlock_excl(&mount_lock);
last_dest = m;
last_source = child;
- if (m->mnt_master != dest_master) {
- read_seqlock_excl(&mount_lock);
- SET_MNT_MARK(m->mnt_master);
- read_sequnlock_excl(&mount_lock);
- }
hlist_add_head(&child->mnt_hash, list);
return count_mounts(m->mnt_ns, child);
}
noffsets = 0;
for (pos = kbuf; pos; pos = next_line) {
struct proc_timens_offset *off = &offsets[noffsets];
+ char clock[10];
int err;
/* Find the end of line and ensure we don't look past it */
next_line = NULL;
}
- err = sscanf(pos, "%u %lld %lu", &off->clockid,
+ err = sscanf(pos, "%9s %lld %lu", clock,
&off->val.tv_sec, &off->val.tv_nsec);
if (err != 3 || off->val.tv_nsec >= NSEC_PER_SEC)
goto out;
+
+ clock[sizeof(clock) - 1] = 0;
+ if (strcmp(clock, "monotonic") == 0 ||
+ strcmp(clock, __stringify(CLOCK_MONOTONIC)) == 0)
+ off->clockid = CLOCK_MONOTONIC;
+ else if (strcmp(clock, "boottime") == 0 ||
+ strcmp(clock, __stringify(CLOCK_BOOTTIME)) == 0)
+ off->clockid = CLOCK_BOOTTIME;
+ else
+ goto out;
+
noffsets++;
if (noffsets == ARRAY_SIZE(offsets)) {
if (next_line)
void proc_flush_pid(struct pid *pid)
{
proc_invalidate_siblings_dcache(&pid->inodes, &pid->lock);
- put_pid(pid);
}
static struct dentry *proc_pid_instantiate(struct dentry * dentry,
if (ns->proc_thread_self)
dput(ns->proc_thread_self);
kill_anon_super(sb);
+
+ /* Make the pid namespace safe for the next mount of proc */
+ ns->proc_self = NULL;
+ ns->proc_thread_self = NULL;
+ ns->pid_gid = GLOBAL_ROOT_GID;
+ ns->hide_pid = 0;
+
put_pid_ns(ns);
}
if (start < offset + dump->size) {
tsz = min(offset + (u64)dump->size - start, (u64)size);
buf = dump->buf + start - offset;
- if (remap_vmalloc_range_partial(vma, dst, buf, tsz)) {
+ if (remap_vmalloc_range_partial(vma, dst, buf, 0,
+ tsz)) {
ret = -EFAULT;
goto out_unlock;
}
tsz = min(elfcorebuf_sz + elfnotes_sz - (size_t)start, size);
kaddr = elfnotes_buf + start - elfcorebuf_sz - vmcoredd_orig_sz;
if (remap_vmalloc_range_partial(vma, vma->vm_start + len,
- kaddr, tsz))
+ kaddr, 0, tsz))
goto fail;
size -= tsz;
mutex_lock(&bdev->bd_fsfreeze_mutex);
if (bdev->bd_fsfreeze_count > 0) {
mutex_unlock(&bdev->bd_fsfreeze_mutex);
- blkdev_put(bdev, mode);
warnf(fc, "%pg: Can't mount, blockdev is frozen", bdev);
+ blkdev_put(bdev, mode);
return -EBUSY;
}
{
struct xfs_mount *mp = container_of(to_delayed_work(work),
struct xfs_mount, m_eofblocks_work);
+
+ if (!sb_start_write_trylock(mp->m_super))
+ return;
xfs_icache_free_eofblocks(mp, NULL);
+ sb_end_write(mp->m_super);
+
xfs_queue_eofblocks(mp);
}
{
struct xfs_mount *mp = container_of(to_delayed_work(work),
struct xfs_mount, m_cowblocks_work);
+
+ if (!sb_start_write_trylock(mp->m_super))
+ return;
xfs_icache_free_cowblocks(mp, NULL);
+ sb_end_write(mp->m_super);
+
xfs_queue_cowblocks(mp);
}
if (error)
return error;
- return xfs_icache_free_eofblocks(mp, &keofb);
+ sb_start_write(mp->m_super);
+ error = xfs_icache_free_eofblocks(mp, &keofb);
+ sb_end_write(mp->m_super);
+ return error;
}
default:
struct xfs_kobj m_error_meta_kobj;
struct xfs_error_cfg m_error_cfg[XFS_ERR_CLASS_MAX][XFS_ERR_ERRNO_MAX];
struct xstats m_stats; /* per-fs stats */
- struct ratelimit_state m_flush_inodes_ratelimit;
+ /*
+ * Workqueue item so that we can coalesce multiple inode flush attempts
+ * into a single flush.
+ */
+ struct work_struct m_flush_inodes_work;
struct workqueue_struct *m_buf_workqueue;
struct workqueue_struct *m_unwritten_workqueue;
struct workqueue_struct *m_cil_workqueue;
uirec.br_startblock = irec->br_startblock + rlen;
uirec.br_startoff = irec->br_startoff + rlen;
uirec.br_blockcount = unmap_len - rlen;
+ uirec.br_state = irec->br_state;
unmap_len = rlen;
/* If this isn't a real mapping, we're done. */
destroy_workqueue(mp->m_buf_workqueue);
}
+static void
+xfs_flush_inodes_worker(
+ struct work_struct *work)
+{
+ struct xfs_mount *mp = container_of(work, struct xfs_mount,
+ m_flush_inodes_work);
+ struct super_block *sb = mp->m_super;
+
+ if (down_read_trylock(&sb->s_umount)) {
+ sync_inodes_sb(sb);
+ up_read(&sb->s_umount);
+ }
+}
+
/*
* Flush all dirty data to disk. Must not be called while holding an XFS_ILOCK
* or a page lock. We use sync_inodes_sb() here to ensure we block while waiting
xfs_flush_inodes(
struct xfs_mount *mp)
{
- struct super_block *sb = mp->m_super;
-
- if (!__ratelimit(&mp->m_flush_inodes_ratelimit))
+ /*
+ * If flush_work() returns true then that means we waited for a flush
+ * which was already in progress. Don't bother running another scan.
+ */
+ if (flush_work(&mp->m_flush_inodes_work))
return;
- if (down_read_trylock(&sb->s_umount)) {
- sync_inodes_sb(sb);
- up_read(&sb->s_umount);
- }
+ queue_work(mp->m_sync_workqueue, &mp->m_flush_inodes_work);
+ flush_work(&mp->m_flush_inodes_work);
}
/* Catch misguided souls that try to use this interface on XFS */
if (error)
goto out_free_names;
- /*
- * Cap the number of invocations of xfs_flush_inodes to 16 for every
- * quarter of a second. The magic numbers here were determined by
- * observation neither to cause stalls in writeback when there are a
- * lot of IO threads and the fs is near ENOSPC, nor cause any fstest
- * regressions. YMMV.
- */
- ratelimit_state_init(&mp->m_flush_inodes_ratelimit, HZ / 4, 16);
- ratelimit_set_flags(&mp->m_flush_inodes_ratelimit,
- RATELIMIT_MSG_ON_RELEASE);
-
error = xfs_init_mount_workqueues(mp);
if (error)
goto out_close_devices;
spin_lock_init(&mp->m_perag_lock);
mutex_init(&mp->m_growlock);
atomic_set(&mp->m_active_trans, 0);
+ INIT_WORK(&mp->m_flush_inodes_work, xfs_flush_inodes_worker);
INIT_DELAYED_WORK(&mp->m_reclaim_work, xfs_reclaim_worker);
INIT_DELAYED_WORK(&mp->m_eofblocks_work, xfs_eofblocks_worker);
INIT_DELAYED_WORK(&mp->m_cowblocks_work, xfs_cowblocks_worker);
mandatory-y += trace_clock.h
mandatory-y += uaccess.h
mandatory-y += unaligned.h
+mandatory-y += vermagic.h
mandatory-y += vga.h
mandatory-y += word-at-a-time.h
mandatory-y += xor.h
return nr_bank;
}
-void hyperv_report_panic(struct pt_regs *regs, long err);
+void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die);
void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
bool hv_is_hyperv_initialized(void);
bool hv_is_hibernation_supported(void);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASM_GENERIC_VERMAGIC_H
+#define _ASM_GENERIC_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC ""
+
+#endif /* _ASM_GENERIC_VERMAGIC_H */
WB_REASON_SYNC,
WB_REASON_PERIODIC,
WB_REASON_LAPTOP_TIMER,
- WB_REASON_FREE_MORE_MEM,
WB_REASON_FS_FREE_SPACE,
/*
* There is no bdi forker thread any more and works are done
struct work_struct bip_work; /* I/O completion */
struct bio_vec *bip_vec;
- struct bio_vec bip_inline_vecs[0];/* embedded bvec array */
+ struct bio_vec bip_inline_vecs[];/* embedded bvec array */
};
#if defined(CONFIG_BLK_DEV_INTEGRITY)
* blocking (BLK_MQ_F_BLOCKING). Must be the last member - see also
* blk_mq_hw_ctx_size().
*/
- struct srcu_struct srcu[0];
+ struct srcu_struct srcu[];
};
/**
* double allocations for a small number of bio_vecs. This member
* MUST obviously be kept at the very end of the bio.
*/
- struct bio_vec bi_inline_vecs[0];
+ struct bio_vec bi_inline_vecs[];
};
#define BIO_RESET_BYTES offsetof(struct bio, bi_max_vecs)
void __brelse(struct buffer_head *);
void __bforget(struct buffer_head *);
void __breadahead(struct block_device *, sector_t block, unsigned int size);
+void __breadahead_gfp(struct block_device *, sector_t block, unsigned int size,
+ gfp_t gfp);
struct buffer_head *__bread_gfp(struct block_device *,
sector_t block, unsigned size, gfp_t gfp);
void invalidate_bh_lrus(void);
__breadahead(sb->s_bdev, block, sb->s_blocksize);
}
+static inline void
+sb_breadahead_unmovable(struct super_block *sb, sector_t block)
+{
+ __breadahead_gfp(sb->s_bdev, block, sb->s_blocksize, 0);
+}
+
static inline struct buffer_head *
sb_getblk(struct super_block *sb, sector_t block)
{
u8 client;
__le16 flags;
__le32 can_id;
- u8 d[0];
+ u8 d[];
};
/* uCAN error types */
u8 client;
__le16 flags;
__le32 can_id;
- u8 d[0];
+ u8 d[];
};
/* build the cmd opcode_channel field with respect to the correct endianness */
struct {
u16 index;
u16 dist;
- } near[0];
+ } near[];
};
#define CPU_RMAP_DIST_INF 0xffff
u8 *value);
void debugfs_create_u16(const char *name, umode_t mode, struct dentry *parent,
u16 *value);
-struct dentry *debugfs_create_u32(const char *name, umode_t mode,
- struct dentry *parent, u32 *value);
+void debugfs_create_u32(const char *name, umode_t mode, struct dentry *parent,
+ u32 *value);
void debugfs_create_u64(const char *name, umode_t mode, struct dentry *parent,
u64 *value);
struct dentry *debugfs_create_ulong(const char *name, umode_t mode,
static inline void debugfs_create_u16(const char *name, umode_t mode,
struct dentry *parent, u16 *value) { }
-static inline struct dentry *debugfs_create_u32(const char *name, umode_t mode,
- struct dentry *parent,
- u32 *value)
-{
- return ERR_PTR(-ENODEV);
-}
+static inline void debugfs_create_u32(const char *name, umode_t mode,
+ struct dentry *parent, u32 *value) { }
static inline void debugfs_create_u64(const char *name, umode_t mode,
struct dentry *parent, u64 *value) { }
uint32_t timestamp; /* key made, always 0 for now */
uint8_t algo;
uint8_t nmpi;
- char mpi[0];
+ char mpi[];
} __packed;
struct signature_hdr {
uint8_t hash;
uint8_t keyid[8];
uint8_t nmpi;
- char mpi[0];
+ char mpi[];
} __packed;
#if defined(CONFIG_SIGNATURE) || defined(CONFIG_SIGNATURE_MODULE)
s64 d_off;
unsigned short d_reclen;
unsigned char d_type;
- char d_name[0];
+ char d_name[];
};
#endif
struct device edev;
struct enclosure_component_callbacks *cb;
int components;
- struct enclosure_component component[0];
+ struct enclosure_component component[];
};
static inline struct enclosure_device *
struct em_perf_domain {
struct em_cap_state *table;
int nr_cap_states;
- unsigned long cpus[0];
+ unsigned long cpus[];
};
#ifdef CONFIG_ENERGY_MODEL
compat_u64 data;
struct compat_ethtool_rx_flow_spec fs;
u32 rule_cnt;
- u32 rule_locs[0];
+ u32 rule_locs[];
};
#endif /* CONFIG_COMPAT */
struct ethtool_rx_flow_rule {
struct flow_rule *rule;
- unsigned long priv[0];
+ unsigned long priv[];
};
struct ethtool_rx_flow_spec_input {
void *owner; /* private data to retrieve at alloc time */
unsigned long start_addr; /* start address of memory chunk */
unsigned long end_addr; /* end address of memory chunk (inclusive) */
- unsigned long bits[0]; /* bitmap for allocating memory chunk */
+ unsigned long bits[]; /* bitmap for allocating memory chunk */
};
/*
unsigned short const *addr_list,
int (*probe)(struct i2c_adapter *adap, unsigned short addr));
-struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
- struct i2c_board_info *info,
- unsigned short const *addr_list,
- int (*probe)(struct i2c_adapter *adap, unsigned short addr));
-
/* Common custom probe functions */
int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr);
unsigned int sl_max;
unsigned int sl_count;
struct rcu_head rcu;
- __be32 sl_addr[0];
+ __be32 sl_addr[];
};
#define IP_SFLSIZE(count) (sizeof(struct ip_sf_socklist) + \
struct ihex_binrec {
__be32 addr;
__be16 len;
- uint8_t data[0];
+ uint8_t data[];
} __attribute__((packed));
static inline uint16_t ihex_binrec_size(const struct ihex_binrec *p)
* 0 on success, negative error number on failure.
*/
#define devm_iio_device_register(dev, indio_dev) \
- __devm_iio_device_register((dev), (indio_dev), THIS_MODULE);
+ __devm_iio_device_register((dev), (indio_dev), THIS_MODULE)
int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
struct module *this_mod);
void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev);
#define IRQ_DEFAULT_INIT_FLAGS ARCH_IRQ_INIT_FLAGS
struct irqaction;
-extern int setup_irq(unsigned int irq, struct irqaction *new);
-extern void remove_irq(unsigned int irq, struct irqaction *act);
extern int setup_percpu_irq(unsigned int irq, struct irqaction *new);
extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
unsigned long unused;
struct irq_domain *domain;
struct list_head list;
- struct irq_chip_type chip_types[0];
+ struct irq_chip_type chip_types[];
};
/**
unsigned int irq_flags_to_clear;
unsigned int irq_flags_to_set;
enum irq_gc_flags gc_flags;
- struct irq_chip_generic *gc[0];
+ struct irq_chip_generic *gc[];
};
/* Generic chip callback functions */
#define GICR_TYPER_PLPIS (1U << 0)
#define GICR_TYPER_VLPIS (1U << 1)
+#define GICR_TYPER_DIRTY (1U << 2)
#define GICR_TYPER_DirectLPIS (1U << 3)
#define GICR_TYPER_LAST (1U << 4)
#define GICR_TYPER_RVPEID (1U << 7)
bool has_vlpis;
bool has_rvpeid;
bool has_direct_lpi;
+ bool has_vpend_valid_dirty;
};
struct irq_domain;
start = slot + 1;
}
- if (gfn >= memslots[start].base_gfn &&
+ if (start < slots->used_slots && gfn >= memslots[start].base_gfn &&
gfn < memslots[start].base_gfn + memslots[start].npages) {
atomic_set(&slots->lru_slot, start);
return &memslots[start];
struct list_lru_memcg {
struct rcu_head rcu;
/* array of per cgroup lists, indexed by memcg_cache_id */
- struct list_lru_one *lru[0];
+ struct list_lru_one *lru[];
};
struct list_lru_node {
*/
struct memcg_shrinker_map {
struct rcu_head rcu;
- unsigned long map[0];
+ unsigned long map[];
};
/*
/* Size of entries[] */
unsigned int size;
/* Array of thresholds */
- struct mem_cgroup_threshold entries[0];
+ struct mem_cgroup_threshold entries[];
};
struct mem_cgroup_thresholds {
u16 result;
u16 data_size;
u8 reserved[2];
- u8 data[0];
+ u8 data[];
} __packed;
/**
#define global_to_pnp_card(n) list_entry(n, struct pnp_card, global_list)
#define protocol_to_pnp_card(n) list_entry(n, struct pnp_card, protocol_list)
#define to_pnp_card(n) container_of(n, struct pnp_card, dev)
-#define pnp_for_each_card(card) \
- for((card) = global_to_pnp_card(pnp_cards.next); \
- (card) != global_to_pnp_card(&pnp_cards); \
- (card) = global_to_pnp_card((card)->global_list.next))
+#define pnp_for_each_card(card) \
+ list_for_each_entry(card, &pnp_cards, global_list)
struct pnp_card_link {
struct pnp_card *card;
#define card_to_pnp_dev(n) list_entry(n, struct pnp_dev, card_list)
#define protocol_to_pnp_dev(n) list_entry(n, struct pnp_dev, protocol_list)
#define to_pnp_dev(n) container_of(n, struct pnp_dev, dev)
-#define pnp_for_each_dev(dev) \
- for((dev) = global_to_pnp_dev(pnp_global.next); \
- (dev) != global_to_pnp_dev(&pnp_global); \
- (dev) = global_to_pnp_dev((dev)->global_list.next))
-#define card_for_each_dev(card,dev) \
- for((dev) = card_to_pnp_dev((card)->devices.next); \
- (dev) != card_to_pnp_dev(&(card)->devices); \
- (dev) = card_to_pnp_dev((dev)->card_list.next))
+#define pnp_for_each_dev(dev) list_for_each_entry(dev, &pnp_global, global_list)
+#define card_for_each_dev(card, dev) \
+ list_for_each_entry(dev, &(card)->devices, card_list)
#define pnp_dev_name(dev) (dev)->name
static inline void *pnp_get_drvdata(struct pnp_dev *pdev)
};
#define to_pnp_protocol(n) list_entry(n, struct pnp_protocol, protocol_list)
-#define protocol_for_each_card(protocol,card) \
- for((card) = protocol_to_pnp_card((protocol)->cards.next); \
- (card) != protocol_to_pnp_card(&(protocol)->cards); \
- (card) = protocol_to_pnp_card((card)->protocol_list.next))
-#define protocol_for_each_dev(protocol,dev) \
- for((dev) = protocol_to_pnp_dev((protocol)->devices.next); \
- (dev) != protocol_to_pnp_dev(&(protocol)->devices); \
- (dev) = protocol_to_pnp_dev((dev)->protocol_list.next))
+#define protocol_for_each_card(protocol, card) \
+ list_for_each_entry(card, &(protocol)->cards, protocol_list)
+#define protocol_for_each_dev(protocol, dev) \
+ list_for_each_entry(dev, &(protocol)->devices, protocol_list)
extern struct bus_type pnp_bus_type;
refcount_t a_refcount;
struct rcu_head a_rcu;
unsigned int a_count;
- struct posix_acl_entry a_entries[0];
+ struct posix_acl_entry a_entries[];
};
#define FOREACH_ACL_ENTRY(pa, acl, pe) \
u32 port_ok;
struct rio_switch_ops *ops;
spinlock_t lock;
- struct rio_dev *nextdev[0];
+ struct rio_dev *nextdev[];
};
/**
u8 hopcount;
struct rio_dev *prev;
atomic_t state;
- struct rio_switch rswitch[0]; /* RIO switch info */
+ struct rio_switch rswitch[]; /* RIO switch info */
};
#define rio_dev_g(n) list_entry(n, struct rio_dev, global_list)
*/
struct rs_control {
struct rs_codec *codec;
- uint16_t buffers[0];
+ uint16_t buffers[];
};
/* General purpose RS codec, 8-bit data width, symbol width 1-15 bit */
* by attaching extra space to the end of the structure,
* depending on how many CPUs the kernel has booted up with)
*/
- unsigned long span[0];
+ unsigned long span[];
};
static inline struct cpumask *sched_domain_span(struct sched_domain *sd)
refcount_t refcnt;
u8 offset[SKB_EXT_NUM]; /* in chunks of 8 bytes */
u8 chunks; /* same */
- char data[0] __aligned(8);
+ char data[] __aligned(8);
};
struct skb_ext *__skb_ext_alloc(void);
struct stmmac_rxq_cfg rx_queues_cfg[MTL_MAX_RX_QUEUES];
struct stmmac_txq_cfg tx_queues_cfg[MTL_MAX_TX_QUEUES];
void (*fix_mac_speed)(void *priv, unsigned int speed);
+ int (*serdes_powerup)(struct net_device *ndev, void *priv);
+ void (*serdes_powerdown)(struct net_device *ndev, void *priv);
int (*init)(struct platform_device *pdev, void *priv);
void (*exit)(struct platform_device *pdev, void *priv);
struct mac_device_info *(*setup)(void *priv);
extern void svc_rdma_recv_ctxt_put(struct svcxprt_rdma *rdma,
struct svc_rdma_recv_ctxt *ctxt);
extern void svc_rdma_flush_recv_queues(struct svcxprt_rdma *rdma);
+extern void svc_rdma_release_rqst(struct svc_rqst *rqstp);
extern int svc_rdma_recvfrom(struct svc_rqst *);
/* svc_rdma_rw.c */
*/
struct work_struct discard_work; /* discard worker */
struct swap_cluster_list discard_clusters; /* discard clusters list */
- struct plist_node avail_lists[0]; /*
+ struct plist_node avail_lists[]; /*
* entries in swap_avail_heads, one
* entry per node.
* Must be last as the number of the
u32 magic;
u32 version;
u8 future[24];
- u8 actions[0];
+ u8 actions[];
} __attribute__ ((packed));
/**
struct bts_action {
u16 type;
u16 size;
- u8 data[0];
+ u8 data[];
} __attribute__ ((packed));
struct bts_action_send {
struct bts_action_wait {
u32 msec;
u32 size;
- u8 data[0];
+ u8 data[];
} __attribute__ ((packed));
struct bts_action_delay {
u32 event_type;
u8 pcr_value[20]; /* SHA1 */
u32 event_size;
- u8 event_data[0];
+ u8 event_data[];
};
enum tcpa_event_types {
struct tcpa_pc_event {
u32 event_id;
u32 event_size;
- u8 event_data[0];
+ u8 event_data[];
};
enum tcpa_pc_event_ids {
struct tcg_event_field {
u32 event_size;
- u8 event[0];
+ u8 event[];
} __packed;
struct tcg_pcr_event2_head {
* Note, the proto and args passed in includes "__data" as the first parameter.
* The reason for this is to handle the "void" prototype. If a tracepoint
* has a "void" prototype, then it is invalid to declare a function
- * as "(void *, void)". The DECLARE_TRACE_NOARGS() will pass in just
- * "void *data", where as the DECLARE_TRACE() will pass in "void *data, proto".
+ * as "(void *, void)".
*/
#define __DO_TRACE(tp, proto, args, cond, rcuidle) \
do { \
# define __tracepoint_string
#endif
-/*
- * The need for the DECLARE_TRACE_NOARGS() is to handle the prototype
- * (void). "void" is a special value in a function prototype and can
- * not be combined with other arguments. Since the DECLARE_TRACE()
- * macro adds a data element at the beginning of the prototype,
- * we need a way to differentiate "(void *data, proto)" from
- * "(void *data, void)". The second prototype is invalid.
- *
- * DECLARE_TRACE_NOARGS() passes "void" as the tracepoint prototype
- * and "void *__data" as the callback prototype.
- *
- * DECLARE_TRACE() passes "proto" as the tracepoint protoype and
- * "void *__data, proto" as the callback prototype.
- */
-#define DECLARE_TRACE_NOARGS(name) \
- __DECLARE_TRACE(name, void, , \
- cpu_online(raw_smp_processor_id()), \
- void *__data, __data)
-
#define DECLARE_TRACE(name, proto, args) \
__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), \
cpu_online(raw_smp_processor_id()), \
u64 (*get_vq_state)(struct vdpa_device *vdev, u16 idx);
/* Device ops */
- u16 (*get_vq_align)(struct vdpa_device *vdev);
+ u32 (*get_vq_align)(struct vdpa_device *vdev);
u64 (*get_features)(struct vdpa_device *vdev);
int (*set_features)(struct vdpa_device *vdev, u64 features);
void (*set_config_cb)(struct vdpa_device *vdev,
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_VERMAGIC_H
+#define _LINUX_VERMAGIC_H
+
#include <generated/utsrelease.h>
+#include <asm/vermagic.h>
/* Simply sanity version stamp for modules. */
#ifdef CONFIG_SMP
#else
#define MODULE_VERMAGIC_MODVERSIONS ""
#endif
-#ifndef MODULE_ARCH_VERMAGIC
-#define MODULE_ARCH_VERMAGIC ""
-#endif
#ifdef RANDSTRUCT_PLUGIN
#include <generated/randomize_layout_hash.h>
#define MODULE_RANDSTRUCT_PLUGIN "RANDSTRUCT_PLUGIN_" RANDSTRUCT_HASHED_SEED
MODULE_ARCH_VERMAGIC \
MODULE_RANDSTRUCT_PLUGIN
+#endif /* _LINUX_VERMAGIC_H */
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <linux/gfp.h>
-#include <linux/vringh.h>
/**
* virtqueue - a queue to register buffers for sending or receiving.
extern int remap_vmalloc_range_partial(struct vm_area_struct *vma,
unsigned long uaddr, void *kaddr,
- unsigned long size);
+ unsigned long pgoff, unsigned long size);
extern int remap_vmalloc_range(struct vm_area_struct *vma, void *addr,
unsigned long pgoff);
#include <linux/virtio_byteorder.h>
#include <linux/uio.h>
#include <linux/slab.h>
+#if IS_REACHABLE(CONFIG_VHOST_IOTLB)
#include <linux/dma-direction.h>
#include <linux/vhost_iotlb.h>
+#endif
#include <asm/barrier.h>
/* virtio_ring with information needed for host access. */
return __cpu_to_virtio64(vringh_is_little_endian(vrh), val);
}
+#if IS_REACHABLE(CONFIG_VHOST_IOTLB)
+
void vringh_set_iotlb(struct vringh *vrh, struct vhost_iotlb *iotlb);
int vringh_init_iotlb(struct vringh *vrh, u64 features,
int vringh_need_notify_iotlb(struct vringh *vrh);
+#endif /* CONFIG_VHOST_IOTLB */
+
#endif /* _LINUX_VRINGH_H */
struct list_head list;
char *name;
size_t size;
- char value[0];
+ char value[];
};
/*
* protocol frames.
* @control_port_over_nl80211: TRUE if userspace expects to exchange control
* port frames over NL80211 instead of the network interface.
+ * @control_port_no_preauth: disables pre-auth rx over the nl80211 control
+ * port for mac80211
* @wep_keys: static WEP keys, if not NULL points to an array of
* CFG80211_MAX_WEP_KEYS WEP keys
* @wep_tx_key: key index (0..3) of the default TX static WEP key
* @he_capa: HE capabilities of station
* @he_capa_len: the length of the HE capabilities
* @airtime_weight: airtime scheduler weight for this station
+ * @txpwr: transmit power for an associated station
*/
struct station_parameters {
const u8 *supported_rates;
* @txq_memory_limit: configuration internal TX queue memory limit
* @txq_quantum: configuration of internal TX queue scheduler quantum
*
+ * @tx_queue_len: allow setting transmit queue len for drivers not using
+ * wake_tx_queue
+ *
* @support_mbssid: can HW support association with nontransmitted AP
* @support_only_he_mbssid: don't parse MBSSID elements if it is not
* HE AP, in order to avoid compatibility issues.
* supported by the driver for each peer
* @tid_config_support.max_retry: maximum supported retry count for
* long/short retry configuration
+ *
+ * @max_data_retry_count: maximum supported per TID retry count for
+ * configuration through the %NL80211_TID_CONFIG_ATTR_RETRY_SHORT and
+ * %NL80211_TID_CONFIG_ATTR_RETRY_LONG attributes
*/
struct wiphy {
/* assign these fields before you register the wiphy */
return rt->rt6i_flags & RTF_ANYCAST ||
(rt->rt6i_dst.plen < 127 &&
+ !(rt->rt6i_flags & (RTF_GATEWAY | RTF_NONEXTHOP)) &&
ipv6_addr_equal(&rt->rt6i_dst.addr, daddr));
}
struct rate_control_ops {
unsigned long capa;
const char *name;
- void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
+ void *(*alloc)(struct ieee80211_hw *hw);
+ void (*add_debugfs)(struct ieee80211_hw *hw, void *priv,
+ struct dentry *debugfsdir);
void (*free)(void *priv);
void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
ND_OPT_DNSSL = 31, /* RFC6106 */
ND_OPT_6CO = 34, /* RFC6775 */
ND_OPT_CAPTIVE_PORTAL = 37, /* RFC7710 */
- ND_OPT_PREF64 = 38, /* RFC-ietf-6man-ra-pref64-09 */
+ ND_OPT_PREF64 = 38, /* RFC8781 */
__ND_OPT_MAX
};
{
struct nft_expr *expr;
- if (nft_set_ext_exists(ext, NFT_SET_EXT_EXPR)) {
+ if (__nft_set_ext_exists(ext, NFT_SET_EXT_EXPR)) {
expr = nft_set_ext_expr(ext);
expr->ops->eval(expr, regs, pkt);
}
}
/**
- * skb_steal_sock
- * @skb to steal the socket from
- * @refcounted is set to true if the socket is reference-counted
+ * skb_steal_sock - steal a socket from an sk_buff
+ * @skb: sk_buff to steal the socket from
+ * @refcounted: is set to true if the socket is reference-counted
*/
static inline struct sock *
skb_steal_sock(struct sk_buff *skb, bool *refcounted)
extern struct percpu_counter tcp_orphan_count;
void tcp_time_wait(struct sock *sk, int state, int timeo);
-#define MAX_TCP_HEADER (128 + MAX_HEADER)
+#define MAX_TCP_HEADER L1_CACHE_ALIGN(128 + MAX_HEADER)
#define MAX_TCP_OPTION_SPACE 40
#define TCP_MIN_SND_MSS 48
#define TCP_MIN_GSO_SIZE (TCP_MIN_SND_MSS - MAX_TCP_OPTION_SPACE)
void __iomem *regs;
+ bool vlan_aware;
+
/* Ingress default VLAN (pvid) */
u16 pvid;
int ocelot_fdb_dump(struct ocelot *ocelot, int port,
dsa_fdb_dump_cb_t *cb, void *data);
int ocelot_fdb_add(struct ocelot *ocelot, int port,
- const unsigned char *addr, u16 vid, bool vlan_aware);
+ const unsigned char *addr, u16 vid);
int ocelot_fdb_del(struct ocelot *ocelot, int port,
const unsigned char *addr, u16 vid);
int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
int tegra_io_rail_power_on(unsigned int id);
int tegra_io_rail_power_off(unsigned int id);
-enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);
return -ENOSYS;
}
-static inline enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
-{
- return TEGRA_SUSPEND_NONE;
-}
-
static inline void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode)
{
}
#endif /* CONFIG_SOC_TEGRA_PMC */
+#if defined(CONFIG_SOC_TEGRA_PMC) && defined(CONFIG_PM_SLEEP)
+enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
+#else
+static inline enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
+{
+ return TEGRA_SUSPEND_NONE;
+}
+#endif
+
#endif /* __SOC_TEGRA_PMC_H__ */
static inline void snd_hda_set_power_save(struct hda_bus *bus, int delay) {}
#endif
+static inline bool hda_codec_need_resume(struct hda_codec *codec)
+{
+ return !codec->relaxed_resume && codec->jacktbl.used;
+}
+
#ifdef CONFIG_SND_HDA_PATCH_LOADER
/*
* patch firmware
/* bit field */
unsigned int probed:1;
- unsigned int started[SNDRV_PCM_STREAM_LAST + 1];
};
static inline struct snd_soc_pcm_stream *
const struct snd_soc_pcm_stream *params;
unsigned int num_params;
+ struct snd_soc_dapm_widget *playback_widget;
+ struct snd_soc_dapm_widget *capture_widget;
+
unsigned int dai_fmt; /* format to set on init */
enum snd_soc_dpcm_trigger trigger[2]; /* trigger type for DPCM */
TRACE_EVENT(iocost_ioc_vrate_adj,
- TP_PROTO(struct ioc *ioc, u64 new_vrate, u32 (*missed_ppm)[2],
+ TP_PROTO(struct ioc *ioc, u64 new_vrate, u32 *missed_ppm,
u32 rq_wait_pct, int nr_lagging, int nr_shortages,
int nr_surpluses),
__entry->old_vrate = atomic64_read(&ioc->vtime_rate);;
__entry->new_vrate = new_vrate;
__entry->busy_level = ioc->busy_level;
- __entry->read_missed_ppm = (*missed_ppm)[READ];
- __entry->write_missed_ppm = (*missed_ppm)[WRITE];
+ __entry->read_missed_ppm = missed_ppm[READ];
+ __entry->write_missed_ppm = missed_ppm[WRITE];
__entry->rq_wait_pct = rq_wait_pct;
__entry->nr_lagging = nr_lagging;
__entry->nr_shortages = nr_shortages;
TRACE_EVENT(svcrdma_post_send,
TP_PROTO(
- const struct ib_send_wr *wr,
- int status
+ const struct ib_send_wr *wr
),
- TP_ARGS(wr, status),
+ TP_ARGS(wr),
TP_STRUCT__entry(
__field(const void *, cqe)
__field(unsigned int, num_sge)
__field(u32, inv_rkey)
- __field(int, status)
),
TP_fast_assign(
__entry->num_sge = wr->num_sge;
__entry->inv_rkey = (wr->opcode == IB_WR_SEND_WITH_INV) ?
wr->ex.invalidate_rkey : 0;
- __entry->status = status;
),
- TP_printk("cqe=%p num_sge=%u inv_rkey=0x%08x status=%d",
+ TP_printk("cqe=%p num_sge=%u inv_rkey=0x%08x",
__entry->cqe, __entry->num_sge,
- __entry->inv_rkey, __entry->status
+ __entry->inv_rkey
)
);
TRACE_EVENT(svcrdma_post_rw,
TP_PROTO(
const void *cqe,
- int sqecount,
- int status
+ int sqecount
),
- TP_ARGS(cqe, sqecount, status),
+ TP_ARGS(cqe, sqecount),
TP_STRUCT__entry(
__field(const void *, cqe)
__field(int, sqecount)
- __field(int, status)
),
TP_fast_assign(
__entry->cqe = cqe;
__entry->sqecount = sqecount;
- __entry->status = status;
),
- TP_printk("cqe=%p sqecount=%d status=%d",
- __entry->cqe, __entry->sqecount, __entry->status
+ TP_printk("cqe=%p sqecount=%d",
+ __entry->cqe, __entry->sqecount
)
);
DEFINE_SQ_EVENT(full);
DEFINE_SQ_EVENT(retry);
+TRACE_EVENT(svcrdma_sq_post_err,
+ TP_PROTO(
+ const struct svcxprt_rdma *rdma,
+ int status
+ ),
+
+ TP_ARGS(rdma, status),
+
+ TP_STRUCT__entry(
+ __field(int, avail)
+ __field(int, depth)
+ __field(int, status)
+ __string(addr, rdma->sc_xprt.xpt_remotebuf)
+ ),
+
+ TP_fast_assign(
+ __entry->avail = atomic_read(&rdma->sc_sq_avail);
+ __entry->depth = rdma->sc_sq_depth;
+ __entry->status = status;
+ __assign_str(addr, rdma->sc_xprt.xpt_remotebuf);
+ ),
+
+ TP_printk("addr=%s sc_sq_avail=%d/%d status=%d",
+ __get_str(addr), __entry->avail, __entry->depth,
+ __entry->status
+ )
+);
+
#endif /* _TRACE_RPCRDMA_H */
#include <trace/define_trace.h>
),
TP_printk("%s: rmean=%llu, rmin=%llu, rmax=%llu, rsamples=%llu, "
- "wmean=%llu, wmin=%llu, wmax=%llu, wsamples=%llu\n",
+ "wmean=%llu, wmin=%llu, wmax=%llu, wsamples=%llu",
__entry->name, __entry->rmean, __entry->rmin, __entry->rmax,
__entry->rnr_samples, __entry->wmean, __entry->wmin,
__entry->wmax, __entry->wnr_samples)
__entry->lat = div_u64(lat, 1000);
),
- TP_printk("%s: latency %lluus\n", __entry->name,
+ TP_printk("%s: latency %lluus", __entry->name,
(unsigned long long) __entry->lat)
);
__entry->max = max;
),
- TP_printk("%s: %s: step=%d, window=%luus, background=%u, normal=%u, max=%u\n",
+ TP_printk("%s: %s: step=%d, window=%luus, background=%u, normal=%u, max=%u",
__entry->name, __entry->msg, __entry->step, __entry->window,
__entry->bg, __entry->normal, __entry->max)
);
__entry->inflight = inflight;
),
- TP_printk("%s: status=%u, step=%d, inflight=%u\n", __entry->name,
+ TP_printk("%s: status=%u, step=%d, inflight=%u", __entry->name,
__entry->status, __entry->step, __entry->inflight)
);
EM( WB_REASON_SYNC, "sync") \
EM( WB_REASON_PERIODIC, "periodic") \
EM( WB_REASON_LAPTOP_TIMER, "laptop_timer") \
- EM( WB_REASON_FREE_MORE_MEM, "free_more_memory") \
EM( WB_REASON_FS_FREE_SPACE, "fs_free_space") \
EMe(WB_REASON_FORKER_THREAD, "forker_thread")
* ifindex, but doesn't require a map to do so.
* Return
* **XDP_REDIRECT** on success, or the value of the two lower bits
- * of the **flags* argument on error.
+ * of the *flags* argument on error.
*
* int bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags)
* Description
#define BTRFS_DEVICE_PATH_NAME_MAX 1024
#define BTRFS_SUBVOL_NAME_MAX 4039
-/*
- * Deprecated since 5.7:
- *
- * BTRFS_SUBVOL_CREATE_ASYNC (1ULL << 0)
- */
-
+#ifndef __KERNEL__
+/* Deprecated since 5.7 */
+# define BTRFS_SUBVOL_CREATE_ASYNC (1ULL << 0)
+#endif
#define BTRFS_SUBVOL_RDONLY (1ULL << 1)
#define BTRFS_SUBVOL_QGROUP_INHERIT (1ULL << 2)
void __user *bastaddr;
struct dlm_lksb __user *lksb;
char lvb[DLM_USER_LVB_LEN];
- char name[0];
+ char name[];
};
struct dlm_lspace_params {
__u32 flags;
__u32 minor;
- char name[0];
+ char name[];
};
struct dlm_purge_params {
__u32 fm_mapped_extents;/* number of extents that were mapped (out) */
__u32 fm_extent_count; /* size of fm_extents array (in) */
__u32 fm_reserved;
- struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */
+ struct fiemap_extent fm_extents[]; /* array of mapped extents (out) */
};
#define FIEMAP_MAX_OFFSET (~0ULL)
struct hv_fcopy_hdr {
__u32 operation;
- uuid_le service_id0; /* currently unused */
- uuid_le service_id1; /* currently unused */
+ __u8 service_id0[16]; /* currently unused */
+ __u8 service_id1[16]; /* currently unused */
} __attribute__((packed));
#define OVER_WRITE 0x1
* @NFT_SET_TIMEOUT: set uses timeouts
* @NFT_SET_EVAL: set can be updated from the evaluation path
* @NFT_SET_OBJECT: set contains stateful objects
+ * @NFT_SET_CONCAT: set contains a concatenation
*/
enum nft_set_flags {
NFT_SET_ANONYMOUS = 0x1,
NFT_SET_TIMEOUT = 0x10,
NFT_SET_EVAL = 0x20,
NFT_SET_OBJECT = 0x40,
+ NFT_SET_CONCAT = 0x80,
};
/**
char label[MAX_IDLETIMER_LABEL_SIZE];
+ __u8 send_nl_msg; /* unused: for compatibility with Android */
__u8 timer_type;
/* for kernel module internal use only */
__u32 num_pages;
/* Number of pages we've actually got in balloon. */
__u32 actual;
- /* Free page report command id, readonly by guest */
- __u32 free_page_report_cmd_id;
+ /*
+ * Free page hint command id, readonly by guest.
+ * Was previously named free_page_report_cmd_id so we
+ * need to carry that name for legacy support.
+ */
+ union {
+ __u32 free_page_hint_cmd_id;
+ __u32 free_page_report_cmd_id; /* deprecated */
+ };
/* Stores PAGE_POISON if page poisoning is in use */
__u32 poison_val;
};
*
* @offset is used by the special time namespace VVAR pages which are
* installed instead of the real VVAR page. These namespace pages must set
- * @seq to 1 and @clock_mode to VLOCK_TIMENS to force the code into the
- * time namespace slow path. The namespace aware functions retrieve the
+ * @seq to 1 and @clock_mode to VDSO_CLOCKMODE_TIMENS to force the code into
+ * the time namespace slow path. The namespace aware functions retrieve the
* real system wide VVAR page, read host time and add the per clock offset.
* For clocks which are not affected by time namespace adjustment the
* offset must be zero.
case AUDIT_FIRST_USER_MSG2 ... AUDIT_LAST_USER_MSG2:
if (!audit_enabled && msg_type != AUDIT_USER_AVC)
return 0;
+ /* exit early if there isn't at least one character to print */
+ if (data_len < 2)
+ return -EINVAL;
err = audit_filter(msg_type, AUDIT_FILTER_USER);
if (err == 1) { /* match or error */
struct bpf_lru_list {
struct list_head lists[NR_BPF_LRU_LIST_T];
unsigned int counts[NR_BPF_LRU_LIST_COUNT];
- /* The next inacitve list rotation starts from here */
+ /* The next inactive list rotation starts from here */
struct list_head *next_inactive_rotation;
raw_spinlock_t lock ____cacheline_aligned_in_smp;
return -EOVERFLOW;
/* Make sure CPU is a valid possible cpu */
- if (!cpu_possible(key_cpu))
+ if (key_cpu >= nr_cpumask_bits || !cpu_possible(key_cpu))
return -ENODEV;
if (qsize == 0) {
{
struct bpf_map *map = vma->vm_file->private_data;
- bpf_map_inc_with_uref(map);
-
- if (vma->vm_flags & VM_WRITE) {
+ if (vma->vm_flags & VM_MAYWRITE) {
mutex_lock(&map->freeze_mutex);
map->writecnt++;
mutex_unlock(&map->freeze_mutex);
{
struct bpf_map *map = vma->vm_file->private_data;
- if (vma->vm_flags & VM_WRITE) {
+ if (vma->vm_flags & VM_MAYWRITE) {
mutex_lock(&map->freeze_mutex);
map->writecnt--;
mutex_unlock(&map->freeze_mutex);
}
-
- bpf_map_put_with_uref(map);
}
static const struct vm_operations_struct bpf_map_default_vmops = {
/* set default open/close callbacks */
vma->vm_ops = &bpf_map_default_vmops;
vma->vm_private_data = map;
+ vma->vm_flags &= ~VM_MAYEXEC;
+ if (!(vma->vm_flags & VM_WRITE))
+ /* disallow re-mapping with PROT_WRITE */
+ vma->vm_flags &= ~VM_MAYWRITE;
err = map->ops->map_mmap(map, vma);
if (err)
goto out;
- bpf_map_inc_with_uref(map);
-
- if (vma->vm_flags & VM_WRITE)
+ if (vma->vm_flags & VM_MAYWRITE)
map->writecnt++;
out:
mutex_unlock(&map->freeze_mutex);
}
#endif
-const struct file_operations bpf_link_fops = {
+static const struct file_operations bpf_link_fops = {
#ifdef CONFIG_PROC_FS
.show_fdinfo = bpf_link_show_fdinfo,
#endif
return PTR_ERR(link);
new_prog = bpf_prog_get(attr->link_update.new_prog_fd);
- if (IS_ERR(new_prog))
- return PTR_ERR(new_prog);
+ if (IS_ERR(new_prog)) {
+ ret = PTR_ERR(new_prog);
+ goto out_put_link;
+ }
if (flags & BPF_F_REPLACE) {
old_prog = bpf_prog_get(attr->link_update.old_prog_fd);
old_prog = NULL;
goto out_put_progs;
}
+ } else if (attr->link_update.old_prog_fd) {
+ ret = -EINVAL;
+ goto out_put_progs;
}
#ifdef CONFIG_CGROUP_BPF
bpf_prog_put(old_prog);
if (ret)
bpf_prog_put(new_prog);
+out_put_link:
+ bpf_link_put(link);
return ret;
}
reg->type = SCALAR_VALUE;
reg->var_off = tnum_unknown;
reg->frameno = 0;
- reg->precise = env->subprog_cnt > 1 || !env->allow_ptr_leaks ?
- true : false;
+ reg->precise = env->subprog_cnt > 1 || !env->allow_ptr_leaks;
__mark_reg_unbounded(reg);
}
return reg->type == SCALAR_VALUE && tnum_is_const(reg->var_off);
}
+static bool __is_pointer_value(bool allow_ptr_leaks,
+ const struct bpf_reg_state *reg)
+{
+ if (allow_ptr_leaks)
+ return false;
+
+ return reg->type != SCALAR_VALUE;
+}
+
static void save_register_state(struct bpf_func_state *state,
int spi, struct bpf_reg_state *reg)
{
* which resets stack/reg liveness for state transitions
*/
state->regs[value_regno].live |= REG_LIVE_WRITTEN;
+ } else if (__is_pointer_value(env->allow_ptr_leaks, reg)) {
+ /* If value_regno==-1, the caller is asking us whether
+ * it is acceptable to use this value as a SCALAR_VALUE
+ * (e.g. for XADD).
+ * We must not allow unprivileged callers to do that
+ * with spilled pointers.
+ */
+ verbose(env, "leaking pointer from stack off %d\n",
+ off);
+ return -EACCES;
}
mark_reg_read(env, reg, reg->parent, REG_LIVE_READ64);
} else {
return -EACCES;
}
-static bool __is_pointer_value(bool allow_ptr_leaks,
- const struct bpf_reg_state *reg)
-{
- if (allow_ptr_leaks)
- return false;
-
- return reg->type != SCALAR_VALUE;
-}
-
static struct bpf_reg_state *reg_state(struct bpf_verifier_env *env, int regno)
{
return cur_regs(env) + regno;
if (ret < 0)
return ret;
- if (atype == BPF_READ) {
+ if (atype == BPF_READ && value_regno >= 0) {
if (ret == SCALAR_VALUE) {
mark_reg_unknown(env, regs, value_regno);
return 0;
return -EINVAL;
}
env->ops = bpf_verifier_ops[tgt_prog->type];
+ prog->expected_attach_type = tgt_prog->expected_attach_type;
}
if (!tgt_prog->jited) {
verbose(env, "Can attach to only JITed progs\n");
* them now. Otherwise free_used_maps() will release them.
*/
release_maps(env);
+
+ /* extension progs temporarily inherit the attach_type of their targets
+ for verification purposes, so set it back to zero before returning
+ */
+ if (env->prog->type == BPF_PROG_TYPE_EXT)
+ env->prog->expected_attach_type = 0;
+
*prog = env->prog;
err_unlock:
if (!is_priv)
goto out;
task_event->event_id.pid = perf_event_pid(event, task);
- task_event->event_id.ppid = perf_event_pid(event, current);
-
task_event->event_id.tid = perf_event_tid(event, task);
- task_event->event_id.ptid = perf_event_tid(event, current);
+
+ if (task_event->event_id.header.type == PERF_RECORD_EXIT) {
+ task_event->event_id.ppid = perf_event_pid(event,
+ task->real_parent);
+ task_event->event_id.ptid = perf_event_pid(event,
+ task->real_parent);
+ } else { /* PERF_RECORD_FORK */
+ task_event->event_id.ppid = perf_event_pid(event, current);
+ task_event->event_id.ptid = perf_event_tid(event, current);
+ }
task_event->event_id.time = perf_event_clock(event);
write_unlock_irq(&tasklist_lock);
proc_flush_pid(thread_pid);
+ put_pid(thread_pid);
release_thread(p);
put_task_struct_rcu_user(p);
struct clone_args args;
pid_t *kset_tid = kargs->set_tid;
+ BUILD_BUG_ON(offsetofend(struct clone_args, tls) !=
+ CLONE_ARGS_SIZE_VER0);
+ BUILD_BUG_ON(offsetofend(struct clone_args, set_tid_size) !=
+ CLONE_ARGS_SIZE_VER1);
+ BUILD_BUG_ON(offsetofend(struct clone_args, cgroup) !=
+ CLONE_ARGS_SIZE_VER2);
+ BUILD_BUG_ON(sizeof(struct clone_args) != CLONE_ARGS_SIZE_VER2);
+
if (unlikely(usize > PAGE_SIZE))
return -E2BIG;
if (unlikely(usize < CLONE_ARGS_SIZE_VER0))
!valid_signal(args.exit_signal)))
return -EINVAL;
- if ((args.flags & CLONE_INTO_CGROUP) && args.cgroup < 0)
+ if ((args.flags & CLONE_INTO_CGROUP) &&
+ (args.cgroup > INT_MAX || usize < CLONE_ARGS_SIZE_VER2))
return -EINVAL;
*kargs = (struct kernel_clone_args){
return ret;
}
-/**
- * setup_irq - setup an interrupt
- * @irq: Interrupt line to setup
- * @act: irqaction for the interrupt
- *
- * Used to statically setup interrupts in the early boot process.
- */
-int setup_irq(unsigned int irq, struct irqaction *act)
-{
- int retval;
- struct irq_desc *desc = irq_to_desc(irq);
-
- if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
- return -EINVAL;
-
- retval = irq_chip_pm_get(&desc->irq_data);
- if (retval < 0)
- return retval;
-
- retval = __setup_irq(irq, desc, act);
-
- if (retval)
- irq_chip_pm_put(&desc->irq_data);
-
- return retval;
-}
-EXPORT_SYMBOL_GPL(setup_irq);
-
/*
* Internal function to unregister an irqaction - used to free
* regular and special interrupts that are part of the architecture.
}
/**
- * remove_irq - free an interrupt
- * @irq: Interrupt line to free
- * @act: irqaction for the interrupt
- *
- * Used to remove interrupts statically setup by the early boot process.
- */
-void remove_irq(unsigned int irq, struct irqaction *act)
-{
- struct irq_desc *desc = irq_to_desc(irq);
-
- if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
- __free_irq(desc, act->dev_id);
-}
-EXPORT_SYMBOL_GPL(remove_irq);
-
-/**
* free_irq - free an interrupt allocated with request_irq
* @irq: Interrupt line to free
* @dev_id: Device identity to free
rcu_cleanup_after_idle();
incby = 1;
- } else if (tick_nohz_full_cpu(rdp->cpu) &&
+ } else if (irq && tick_nohz_full_cpu(rdp->cpu) &&
rdp->dynticks_nmi_nesting == DYNTICK_IRQ_NONIDLE &&
READ_ONCE(rdp->rcu_urgent_qs) &&
!READ_ONCE(rdp->rcu_forced_tick)) {
return;
for_each_clamp_id(clamp_id) {
- unsigned int clamp_value = uclamp_none(clamp_id);
-
- /* By default, RT tasks always get 100% boost */
- if (unlikely(rt_task(p) && clamp_id == UCLAMP_MIN))
- clamp_value = uclamp_none(UCLAMP_MAX);
-
- uclamp_se_set(&p->uclamp_req[clamp_id], clamp_value, false);
+ uclamp_se_set(&p->uclamp_req[clamp_id],
+ uclamp_none(clamp_id), false);
}
}
enum cpu_usage_stat usage, int cpu)
{
u64 *cpustat = kcpustat->cpustat;
+ u64 val = cpustat[usage];
struct rq *rq;
- u64 val;
int err;
if (!vtime_accounting_enabled_cpu(cpu))
- return cpustat[usage];
+ return val;
rq = cpu_rq(cpu);
static int __init housekeeping_isolcpus_setup(char *str)
{
unsigned int flags = 0;
+ bool illegal = false;
+ char *par;
+ int len;
while (isalpha(*str)) {
if (!strncmp(str, "nohz,", 5)) {
continue;
}
- pr_warn("isolcpus: Error, unknown flag\n");
- return 0;
+ /*
+ * Skip unknown sub-parameter and validate that it is not
+ * containing an invalid character.
+ */
+ for (par = str, len = 0; *str && *str != ','; str++, len++) {
+ if (!isalpha(*str) && *str != '_')
+ illegal = true;
+ }
+
+ if (illegal) {
+ pr_warn("isolcpus: Invalid flag %.*s\n", len, par);
+ return 0;
+ }
+
+ pr_info("isolcpus: Skipped unknown flag %.*s\n", len, par);
+ str++;
}
/* Default behaviour for isolcpus without flags */
unsigned long flags;
int ret = -EINVAL;
+ if (!valid_signal(sig))
+ return ret;
+
clear_siginfo(&info);
info.si_signo = sig;
info.si_errno = errno;
info.si_code = SI_ASYNCIO;
*((sigval_t *)&info.si_pid) = addr;
- if (!valid_signal(sig))
- return ret;
-
rcu_read_lock();
p = pid_task(pid, PIDTYPE_PID);
if (!p) {
{
int ret;
- if (pid > 0) {
- rcu_read_lock();
- ret = kill_pid_info(sig, info, find_vpid(pid));
- rcu_read_unlock();
- return ret;
- }
+ if (pid > 0)
+ return kill_proc_info(sig, info, pid);
/* -INT_MIN is undefined. Exclude this case to avoid a UBSAN warning */
if (pid == INT_MIN)
if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
sig = 0;
}
+ /*
+ * Send with __send_signal as si_pid and si_uid are in the
+ * parent's namespaces.
+ */
if (valid_signal(sig) && sig)
- __group_send_sig_info(sig, &info, tsk->parent);
+ __send_signal(sig, &info, tsk->parent, PIDTYPE_TGID, false);
__wake_up_parent(tsk, tsk->parent);
spin_unlock_irqrestore(&psig->siglock, flags);
static void show_offset(struct seq_file *m, int clockid, struct timespec64 *ts)
{
- seq_printf(m, "%d %lld %ld\n", clockid, ts->tv_sec, ts->tv_nsec);
+ char *clock;
+
+ switch (clockid) {
+ case CLOCK_BOOTTIME:
+ clock = "boottime";
+ break;
+ case CLOCK_MONOTONIC:
+ clock = "monotonic";
+ break;
+ default:
+ clock = "unknown";
+ break;
+ }
+ seq_printf(m, "%-10s %10lld %9ld\n", clock, ts->tv_sec, ts->tv_nsec);
}
void proc_timens_show_offsets(struct task_struct *p, struct seq_file *m)
list_del_rcu(&direct->next);
synchronize_rcu_tasks();
kfree(direct);
+ kfree(entry);
ftrace_direct_func_count--;
}
}
kfree(hist_field->name);
kfree(hist_field->type);
+ kfree(hist_field->system);
+ kfree(hist_field->event_name);
+
kfree(hist_field);
}
goto out;
}
+ var->ref = 1;
var->flags = HIST_FIELD_FL_VAR;
var->var.idx = idx;
var->var.hist_data = var->hist_data = hist_data;
for (i = 0; i < hist_data->n_field_vars; i++)
destroy_field_var(hist_data->field_vars[i]);
+
+ for (i = 0; i < hist_data->n_save_vars; i++)
+ destroy_field_var(hist_data->save_vars[i]);
}
static void save_field_var(struct hist_trigger_data *hist_data,
struct event_trigger_data *data,
struct trace_event_file *file)
{
- int ret = register_trigger(glob, ops, data, file);
-
- if (ret > 0 && tracing_alloc_snapshot_instance(file->tr) != 0) {
- unregister_trigger(glob, ops, data, file);
- ret = 0;
- }
+ if (tracing_alloc_snapshot_instance(file->tr) != 0)
+ return 0;
- return ret;
+ return register_trigger(glob, ops, data, file);
}
static int
return idx;
}
-void tracing_map_array_clear(struct tracing_map_array *a)
+static void tracing_map_array_clear(struct tracing_map_array *a)
{
unsigned int i;
memset(a->pages[i], 0, PAGE_SIZE);
}
-void tracing_map_array_free(struct tracing_map_array *a)
+static void tracing_map_array_free(struct tracing_map_array *a)
{
unsigned int i;
kfree(a);
}
-struct tracing_map_array *tracing_map_array_alloc(unsigned int n_elts,
+static struct tracing_map_array *tracing_map_array_alloc(unsigned int n_elts,
unsigned int entry_size)
{
struct tracing_map_array *a;
config DEBUG_INFO_BTF
bool "Generate BTF typeinfo"
depends on DEBUG_INFO
+ depends on !DEBUG_INFO_SPLIT && !DEBUG_INFO_REDUCED
+ depends on !GCC_PLUGIN_RANDSTRUCT || COMPILE_TEST
help
Generate deduplicated BTF type information from DWARF debug info.
Turning this on expects presence of pahole tool, which will convert
* representation.
*/
if (suite)
- pr_info("%s %zd - %s",
+ pr_info("%s %zd - %s\n",
kunit_status_to_string(is_ok),
test_number, description);
else
do { \
if (__builtin_constant_p(bh) && (bh) == 0) \
__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "%r" ((USItype)(ah)), \
"%r" ((USItype)(al)), \
"rI" ((USItype)(bl))); \
else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \
__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "%r" ((USItype)(ah)), \
"%r" ((USItype)(al)), \
"rI" ((USItype)(bl))); \
else \
__asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "%r" ((USItype)(ah)), \
"r" ((USItype)(bh)), \
"%r" ((USItype)(al)), \
do { \
if (__builtin_constant_p(ah) && (ah) == 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(bh)), \
"rI" ((USItype)(al)), \
"r" ((USItype)(bl))); \
else if (__builtin_constant_p(ah) && (ah) == ~(USItype) 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(bh)), \
"rI" ((USItype)(al)), \
"r" ((USItype)(bl))); \
else if (__builtin_constant_p(bh) && (bh) == 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(ah)), \
"rI" ((USItype)(al)), \
"r" ((USItype)(bl))); \
else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(ah)), \
"rI" ((USItype)(al)), \
"r" ((USItype)(bl))); \
else \
__asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(ah)), \
"r" ((USItype)(bh)), \
"rI" ((USItype)(al)), \
do { \
USItype __m0 = (m0), __m1 = (m1); \
__asm__ ("mulhwu %0,%1,%2" \
- : "=r" ((USItype) ph) \
+ : "=r" (ph) \
: "%r" (__m0), \
"r" (__m1)); \
(pl) = __m0 * __m1; \
* potentially allocating memory.
*/
if (fatal_signal_pending(current)) {
- ret = -ERESTARTSYS;
+ ret = -EINTR;
goto out;
}
cond_resched();
{
pgd_t *pgd;
p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
+ pud_t *pud, pud_entry;
+ pmd_t *pmd, pmd_entry;
pgd = pgd_offset(mm, addr);
if (!pgd_present(*pgd))
return NULL;
pud = pud_offset(p4d, addr);
- if (sz != PUD_SIZE && pud_none(*pud))
+ pud_entry = READ_ONCE(*pud);
+ if (sz != PUD_SIZE && pud_none(pud_entry))
return NULL;
/* hugepage or swap? */
- if (pud_huge(*pud) || !pud_present(*pud))
+ if (pud_huge(pud_entry) || !pud_present(pud_entry))
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
- if (sz != PMD_SIZE && pmd_none(*pmd))
+ pmd_entry = READ_ONCE(*pmd);
+ if (sz != PMD_SIZE && pmd_none(pmd_entry))
return NULL;
/* hugepage or swap? */
- if (pmd_huge(*pmd) || !pmd_present(*pmd))
+ if (pmd_huge(pmd_entry) || !pmd_present(pmd_entry))
return (pte_t *)pmd;
return NULL;
down_read(&mm->mmap_sem);
vma = find_mergeable_vma(mm, rmap_item->address);
- err = try_to_merge_one_page(vma, page,
- ZERO_PAGE(rmap_item->address));
+ if (vma) {
+ err = try_to_merge_one_page(vma, page,
+ ZERO_PAGE(rmap_item->address));
+ } else {
+ /*
+ * If the vma is out of date, we do not need to
+ * continue.
+ */
+ err = 0;
+ }
up_read(&mm->mmap_sem);
/*
* In case of failure, the page was not really empty, so we
#include <linux/swapops.h>
#include <linux/shmem_fs.h>
#include <linux/mmu_notifier.h>
+#include <linux/sched/mm.h>
#include <asm/tlb.h>
if (write) {
if (down_write_killable(¤t->mm->mmap_sem))
return -EINTR;
+
+ /*
+ * We may have stolen the mm from another process
+ * that is undergoing core dumping.
+ *
+ * Right now that's io_ring, in the future it may
+ * be remote process management and not "current"
+ * at all.
+ *
+ * We need to fix core dumping to not do this,
+ * but for now we have the mmget_still_valid()
+ * model.
+ */
+ if (!mmget_still_valid(current->mm)) {
+ up_write(¤t->mm->mmap_sem);
+ return -EINTR;
+ }
} else {
down_read(¤t->mm->mmap_sem);
}
/* Always put back VM_ACCOUNT since we won't unmap */
vma->vm_flags |= VM_ACCOUNT;
- vm_acct_memory(vma_pages(new_vma));
+ vm_acct_memory(new_len >> PAGE_SHIFT);
}
+ /*
+ * VMAs can actually be merged back together in copy_vma
+ * calling merge_vma. This can happen with anonymous vmas
+ * which have not yet been faulted, so if we were to consider
+ * this VMA split we'll end up adding VM_ACCOUNT on the
+ * next VMA, which is completely unrelated if this VMA
+ * was re-merged.
+ */
+ if (split && new_vma == vma)
+ split = 0;
+
/* We always clear VM_LOCKED[ONFAULT] on the old vma */
vma->vm_flags &= VM_LOCKED_CLEAR_MASK;
VM_BUG_ON_PAGE(PageWriteback(page), page);
if (shmem_punch_compound(page, start, end))
truncate_inode_page(mapping, page);
- else {
+ else if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
/* Wipe the page and don't get stuck */
clear_highpage(page);
flush_dcache_page(page);
struct shmem_inode_info *info = SHMEM_I(inode);
int retval = -ENOMEM;
- spin_lock_irq(&info->lock);
+ /*
+ * What serializes the accesses to info->flags?
+ * ipc_lock_object() when called from shmctl_do_lock(),
+ * no serialization needed when called from shm_destroy().
+ */
if (lock && !(info->flags & VM_LOCKED)) {
if (!user_shm_lock(inode->i_size, user))
goto out_nomem;
retval = 0;
out_nomem:
- spin_unlock_irq(&info->lock);
return retval;
}
lru_cache_add_anon(page);
- spin_lock(&info->lock);
+ spin_lock_irq(&info->lock);
info->alloced++;
inode->i_blocks += BLOCKS_PER_PAGE;
shmem_recalc_inode(inode);
- spin_unlock(&info->lock);
+ spin_unlock_irq(&info->lock);
inc_mm_counter(dst_mm, mm_counter_file(page));
page_add_file_rmap(page, false);
{
slab_flags_t flags = s->flags;
unsigned int size = s->object_size;
+ unsigned int freepointer_area;
unsigned int order;
/*
* the possible location of the free pointer.
*/
size = ALIGN(size, sizeof(void *));
+ /*
+ * This is the area of the object where a freepointer can be
+ * safely written. If redzoning adds more to the inuse size, we
+ * can't use that portion for writing the freepointer, so
+ * s->offset must be limited within this for the general case.
+ */
+ freepointer_area = size;
#ifdef CONFIG_SLUB_DEBUG
/*
*/
s->offset = size;
size += sizeof(void *);
- } else if (size > sizeof(void *)) {
+ } else if (freepointer_area > sizeof(void *)) {
/*
* Store freelist pointer near middle of object to keep
* it away from the edges of the object to avoid small
* sized over/underflows from neighboring allocations.
*/
- s->offset = ALIGN(size / 2, sizeof(void *));
+ s->offset = ALIGN(freepointer_area / 2, sizeof(void *));
}
#ifdef CONFIG_SLUB_DEBUG
#include <linux/llist.h>
#include <linux/bitops.h>
#include <linux/rbtree_augmented.h>
+#include <linux/overflow.h>
#include <linux/uaccess.h>
#include <asm/tlbflush.h>
* @vma: vma to cover
* @uaddr: target user address to start at
* @kaddr: virtual address of vmalloc kernel memory
+ * @pgoff: offset from @kaddr to start at
* @size: size of map area
*
* Returns: 0 for success, -Exxx on failure
* Similar to remap_pfn_range() (see mm/memory.c)
*/
int remap_vmalloc_range_partial(struct vm_area_struct *vma, unsigned long uaddr,
- void *kaddr, unsigned long size)
+ void *kaddr, unsigned long pgoff,
+ unsigned long size)
{
struct vm_struct *area;
+ unsigned long off;
+ unsigned long end_index;
+
+ if (check_shl_overflow(pgoff, PAGE_SHIFT, &off))
+ return -EINVAL;
size = PAGE_ALIGN(size);
if (!(area->flags & (VM_USERMAP | VM_DMA_COHERENT)))
return -EINVAL;
- if (kaddr + size > area->addr + get_vm_area_size(area))
+ if (check_add_overflow(size, off, &end_index) ||
+ end_index > get_vm_area_size(area))
return -EINVAL;
+ kaddr += off;
do {
struct page *page = vmalloc_to_page(kaddr);
unsigned long pgoff)
{
return remap_vmalloc_range_partial(vma, vma->vm_start,
- addr + (pgoff << PAGE_SHIFT),
+ addr, pgoff,
vma->vm_end - vma->vm_start);
}
EXPORT_SYMBOL(remap_vmalloc_range);
int netdev_tstamp_prequeue __read_mostly = 1;
int netdev_budget __read_mostly = 300;
-unsigned int __read_mostly netdev_budget_usecs = 2000;
+/* Must be at least 2 jiffes to guarantee 1 jiffy timeout */
+unsigned int __read_mostly netdev_budget_usecs = 2 * USEC_PER_SEC / HZ;
int weight_p __read_mostly = 64; /* old backlog weight */
int dev_weight_rx_bias __read_mostly = 1; /* bias for backlog weight */
int dev_weight_tx_bias __read_mostly = 1; /* bias for output_queue quota */
const struct net_device_ops *ops = dev->netdev_ops;
enum bpf_netdev_command query;
u32 prog_id, expected_id = 0;
- struct bpf_prog *prog = NULL;
bpf_op_t bpf_op, bpf_chk;
+ struct bpf_prog *prog;
bool offload;
int err;
} else {
if (!prog_id)
return 0;
+ prog = NULL;
}
err = dev_xdp_install(dev, bpf_op, extack, flags, prog);
return -EOPNOTSUPP;
if (unlikely(dev_net(skb->dev) != sock_net(sk)))
return -ENETUNREACH;
- if (unlikely(sk->sk_reuseport))
+ if (unlikely(sk_fullsock(sk) && sk->sk_reuseport))
return -ESOCKTNOSUPPORT;
if (sk_is_refcounted(sk) &&
unlikely(!refcount_inc_not_zero(&sk->sk_refcnt)))
struct net_device *netdev = to_net_dev(dev);
struct net *net = dev_net(netdev);
unsigned long new;
- int ret = -EINVAL;
+ int ret;
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
return -EPERM;
cs->classid = (u32)value;
css_task_iter_start(css, 0, &it);
- while ((p = css_task_iter_next(&it))) {
+ while ((p = css_task_iter_next(&it)))
update_classid_task(p, cs->classid);
- cond_resched();
- }
css_task_iter_end(&it);
return 0;
* as not suitable for copying when cloning.
*/
if (sk_user_data_is_nocopy(newsk))
- RCU_INIT_POINTER(newsk->sk_user_data, NULL);
+ newsk->sk_user_data = NULL;
newsk->sk_err = 0;
newsk->sk_err_soft = 0;
{
struct dsa_switch *ds = dp->ds;
struct device_node *phy_np;
+ int port = dp->index;
if (!ds->ops->adjust_link) {
phy_np = of_parse_phandle(dp->dn, "phy-handle", 0);
- if (of_phy_is_fixed_link(dp->dn) || phy_np)
+ if (of_phy_is_fixed_link(dp->dn) || phy_np) {
+ if (ds->ops->phylink_mac_link_down)
+ ds->ops->phylink_mac_link_down(ds, port,
+ MLO_AN_FIXED, PHY_INTERFACE_MODE_NA);
return dsa_port_phylink_register(dp);
+ }
return 0;
}
rtnl_lock();
ret = dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN);
rtnl_unlock();
- if (ret && ret != -EOPNOTSUPP) {
- dev_err(ds->dev, "error %d setting MTU on port %d\n",
- ret, port->index);
- goto out_free;
- }
+ if (ret)
+ dev_warn(ds->dev, "nonfatal error %d setting MTU on port %d\n",
+ ret, port->index);
netif_carrier_off(slave_dev);
else
multicast_spec = nla_get_u8(data[IFLA_HSR_MULTICAST_SPEC]);
- if (!data[IFLA_HSR_VERSION])
+ if (!data[IFLA_HSR_VERSION]) {
hsr_version = 0;
- else
+ } else {
hsr_version = nla_get_u8(data[IFLA_HSR_VERSION]);
+ if (hsr_version > 1) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Only versions 0..1 are supported");
+ return -EINVAL;
+ }
+ }
return hsr_dev_finalize(dev, link, multicast_spec, hsr_version, extack);
}
return NULL;
}
-static int ip_mc_config(struct sock *sk, bool join, const struct in_ifaddr *ifa)
+static int ip_mc_autojoin_config(struct net *net, bool join,
+ const struct in_ifaddr *ifa)
{
+#if defined(CONFIG_IP_MULTICAST)
struct ip_mreqn mreq = {
.imr_multiaddr.s_addr = ifa->ifa_address,
.imr_ifindex = ifa->ifa_dev->dev->ifindex,
};
+ struct sock *sk = net->ipv4.mc_autojoin_sk;
int ret;
ASSERT_RTNL();
release_sock(sk);
return ret;
+#else
+ return -EOPNOTSUPP;
+#endif
}
static int inet_rtm_deladdr(struct sk_buff *skb, struct nlmsghdr *nlh,
continue;
if (ipv4_is_multicast(ifa->ifa_address))
- ip_mc_config(net->ipv4.mc_autojoin_sk, false, ifa);
+ ip_mc_autojoin_config(net, false, ifa);
__inet_del_ifa(in_dev, ifap, 1, nlh, NETLINK_CB(skb).portid);
return 0;
}
*/
set_ifa_lifetime(ifa, valid_lft, prefered_lft);
if (ifa->ifa_flags & IFA_F_MCAUTOJOIN) {
- int ret = ip_mc_config(net->ipv4.mc_autojoin_sk,
- true, ifa);
+ int ret = ip_mc_autojoin_config(net, true, ifa);
if (ret < 0) {
inet_free_ifa(ifa);
hlist_for_each_entry_rcu(fa, fa_head, fa_list) {
struct fib_info *next_fi = fa->fa_info;
- struct fib_nh *nh;
+ struct fib_nh_common *nhc;
if (fa->fa_slen != slen)
continue;
fa->fa_type != RTN_UNICAST)
continue;
- nh = fib_info_nh(next_fi, 0);
- if (!nh->fib_nh_gw4 || nh->fib_nh_scope != RT_SCOPE_LINK)
+ nhc = fib_info_nhc(next_fi, 0);
+ if (!nhc->nhc_gw_family || nhc->nhc_scope != RT_SCOPE_LINK)
continue;
fib_alias_accessed(fa);
{
memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
-#ifdef CONFIG_NETFILTER
IPCB(skb)->flags |= IPSKB_XFRM_TRANSFORMED;
-#endif
return xfrm_output(sk, skb);
}
return res;
}
+static bool icmpv6_rt_has_prefsrc(struct sock *sk, u8 type,
+ struct flowi6 *fl6)
+{
+ struct net *net = sock_net(sk);
+ struct dst_entry *dst;
+ bool res = false;
+
+ dst = ip6_route_output(net, sk, fl6);
+ if (!dst->error) {
+ struct rt6_info *rt = (struct rt6_info *)dst;
+ struct in6_addr prefsrc;
+
+ rt6_get_prefsrc(rt, &prefsrc);
+ res = !ipv6_addr_any(&prefsrc);
+ }
+ dst_release(dst);
+ return res;
+}
+
/*
* an inline helper for the "simple" if statement below
* checks if parameter problem report is caused by an
saddr = force_saddr;
if (saddr) {
fl6.saddr = *saddr;
- } else {
+ } else if (!icmpv6_rt_has_prefsrc(sk, type, &fl6)) {
/* select a more meaningful saddr from input if */
struct net_device *in_netdev;
retv = -EBUSY;
break;
}
- } else if (sk->sk_protocol == IPPROTO_TCP) {
- if (sk->sk_prot != &tcpv6_prot) {
- retv = -EBUSY;
- break;
- }
- break;
- } else {
+ }
+ if (sk->sk_protocol == IPPROTO_TCP &&
+ sk->sk_prot != &tcpv6_prot) {
+ retv = -EBUSY;
break;
}
+ if (sk->sk_protocol != IPPROTO_TCP)
+ break;
if (sk->sk_state != TCP_ESTABLISHED) {
retv = -ENOTCONN;
break;
#include <net/rpl.h>
#define IPV6_PFXTAIL_LEN(x) (sizeof(struct in6_addr) - (x))
+#define IPV6_RPL_BEST_ADDR_COMPRESSION 15
static void ipv6_rpl_addr_decompress(struct in6_addr *dst,
const struct in6_addr *daddr,
}
}
- return plen;
+ return IPV6_RPL_BEST_ADDR_COMPRESSION;
}
static unsigned char ipv6_rpl_srh_calc_cmpre(const struct in6_addr *daddr,
for (plen = 0; plen < sizeof(*daddr); plen++) {
if (daddr->s6_addr[plen] != last_segment->s6_addr[plen])
- break;
+ return plen;
}
- return plen;
+ return IPV6_RPL_BEST_ADDR_COMPRESSION;
}
void ipv6_rpl_srh_compress(struct ipv6_rpl_sr_hdr *outhdr,
int __init seg6_init(void)
{
- int err = -ENOMEM;
+ int err;
err = genl_register_family(&seg6_genl_family);
if (err)
{
memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
-#ifdef CONFIG_NETFILTER
IP6CB(skb)->flags |= IP6SKB_XFRM_TRANSFORMED;
-#endif
return xfrm_output(sk, skb);
}
.cmd = L2TP_CMD_TUNNEL_CREATE,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = l2tp_nl_cmd_tunnel_create,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
},
{
.cmd = L2TP_CMD_TUNNEL_DELETE,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = l2tp_nl_cmd_tunnel_delete,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
},
{
.cmd = L2TP_CMD_TUNNEL_MODIFY,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = l2tp_nl_cmd_tunnel_modify,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
},
{
.cmd = L2TP_CMD_TUNNEL_GET,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = l2tp_nl_cmd_tunnel_get,
.dumpit = l2tp_nl_cmd_tunnel_dump,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
},
{
.cmd = L2TP_CMD_SESSION_CREATE,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = l2tp_nl_cmd_session_create,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
},
{
.cmd = L2TP_CMD_SESSION_DELETE,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = l2tp_nl_cmd_session_delete,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
},
{
.cmd = L2TP_CMD_SESSION_MODIFY,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = l2tp_nl_cmd_session_modify,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
},
{
.cmd = L2TP_CMD_SESSION_GET,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = l2tp_nl_cmd_session_get,
.dumpit = l2tp_nl_cmd_session_dump,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
},
};
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
if (hw->max_signal <= 0) {
result = -EINVAL;
- goto fail_wiphy_register;
+ goto fail_workqueue;
}
}
result = ieee80211_init_cipher_suites(local);
if (result < 0)
- goto fail_wiphy_register;
+ goto fail_workqueue;
if (!local->ops->remain_on_channel)
local->hw.wiphy->max_remain_on_channel_duration = 5000;
local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM;
- result = wiphy_register(local->hw.wiphy);
- if (result < 0)
- goto fail_wiphy_register;
-
/*
* We use the number of queues for feature tests (QoS, HT) internally
* so restrict them appropriately.
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
IEEE80211_TX_STATUS_HEADROOM);
- debugfs_hw_add(local);
-
/*
* if the driver doesn't specify a max listen interval we
* use 5 which should be a safe default
goto fail_flows;
rtnl_lock();
-
result = ieee80211_init_rate_ctrl_alg(local,
hw->rate_control_algorithm);
+ rtnl_unlock();
if (result < 0) {
wiphy_debug(local->hw.wiphy,
"Failed to initialize rate control algorithm\n");
local->sband_allocated |= BIT(band);
}
+ result = wiphy_register(local->hw.wiphy);
+ if (result < 0)
+ goto fail_wiphy_register;
+
+ debugfs_hw_add(local);
+ rate_control_add_debugfs(local);
+
+ rtnl_lock();
+
/* add one default STA interface if supported */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) &&
!ieee80211_hw_check(hw, NO_AUTO_VIF)) {
#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
fail_ifa:
#endif
+ wiphy_unregister(local->hw.wiphy);
+ fail_wiphy_register:
rtnl_lock();
rate_control_deinitialize(local);
ieee80211_remove_interfaces(local);
- fail_rate:
rtnl_unlock();
+ fail_rate:
fail_flows:
ieee80211_led_exit(local);
destroy_workqueue(local->workqueue);
fail_workqueue:
- wiphy_unregister(local->hw.wiphy);
- fail_wiphy_register:
if (local->wiphy_ciphers_allocated)
kfree(local->hw.wiphy->cipher_suites);
kfree(local->int_scan_req);
skb_queue_purge(&local->skb_queue_unreliable);
skb_queue_purge(&local->skb_queue_tdls_chsw);
- destroy_workqueue(local->workqueue);
wiphy_unregister(local->hw.wiphy);
+ destroy_workqueue(local->workqueue);
ieee80211_led_exit(local);
kfree(local->int_scan_req);
}
sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal)
mesh_neighbour_update(sdata, mgmt->sa, &elems,
rx_status);
+
+ if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
+ !sdata->vif.csa_active)
+ ieee80211_mesh_process_chnswitch(sdata, &elems, true);
}
if (ifmsh->sync_ops)
ifmsh->sync_ops->rx_bcn_presp(sdata,
stype, mgmt, &elems, rx_status);
-
- if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
- !sdata->vif.csa_active)
- ieee80211_mesh_process_chnswitch(sdata, &elems, true);
}
int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
ieee802_11_parse_elems(pos, len - baselen, true, &elems,
mgmt->bssid, NULL);
+ if (!mesh_matches_local(sdata, &elems))
+ return;
+
ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl;
if (!--ifmsh->chsw_ttl)
fwd_csa = false;
ref->ops->name, len);
}
-static const struct file_operations rcname_ops = {
+const struct file_operations rcname_ops = {
.read = rcname_read,
.open = simple_open,
.llseek = default_llseek,
};
#endif
-static struct rate_control_ref *rate_control_alloc(const char *name,
- struct ieee80211_local *local)
+static struct rate_control_ref *
+rate_control_alloc(const char *name, struct ieee80211_local *local)
{
- struct dentry *debugfsdir = NULL;
struct rate_control_ref *ref;
ref = kmalloc(sizeof(struct rate_control_ref), GFP_KERNEL);
if (!ref->ops)
goto free;
-#ifdef CONFIG_MAC80211_DEBUGFS
- debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir);
- local->debugfs.rcdir = debugfsdir;
- debugfs_create_file("name", 0400, debugfsdir, ref, &rcname_ops);
-#endif
-
- ref->priv = ref->ops->alloc(&local->hw, debugfsdir);
+ ref->priv = ref->ops->alloc(&local->hw);
if (!ref->priv)
goto free;
return ref;
#endif
}
+extern const struct file_operations rcname_ops;
+
+static inline void rate_control_add_debugfs(struct ieee80211_local *local)
+{
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct dentry *debugfsdir;
+
+ if (!local->rate_ctrl)
+ return;
+
+ if (!local->rate_ctrl->ops->add_debugfs)
+ return;
+
+ debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir);
+ local->debugfs.rcdir = debugfsdir;
+ debugfs_create_file("name", 0400, debugfsdir,
+ local->rate_ctrl, &rcname_ops);
+
+ local->rate_ctrl->ops->add_debugfs(&local->hw, local->rate_ctrl->priv,
+ debugfsdir);
+#endif
+}
+
void ieee80211_check_rate_mask(struct ieee80211_sub_if_data *sdata);
/* Get a reference to the rate control algorithm. If `name' is NULL, get the
}
static void *
-minstrel_ht_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+minstrel_ht_alloc(struct ieee80211_hw *hw)
{
struct minstrel_priv *mp;
mp->update_interval = HZ / 10;
mp->new_avg = true;
+ minstrel_ht_init_cck_rates(mp);
+
+ return mp;
+}
+
#ifdef CONFIG_MAC80211_DEBUGFS
+static void minstrel_ht_add_debugfs(struct ieee80211_hw *hw, void *priv,
+ struct dentry *debugfsdir)
+{
+ struct minstrel_priv *mp = priv;
+
mp->fixed_rate_idx = (u32) -1;
debugfs_create_u32("fixed_rate_idx", S_IRUGO | S_IWUGO, debugfsdir,
&mp->fixed_rate_idx);
&mp->sample_switch);
debugfs_create_bool("new_avg", S_IRUGO | S_IWUSR, debugfsdir,
&mp->new_avg);
-#endif
-
- minstrel_ht_init_cck_rates(mp);
-
- return mp;
}
+#endif
static void
minstrel_ht_free(void *priv)
.alloc = minstrel_ht_alloc,
.free = minstrel_ht_free,
#ifdef CONFIG_MAC80211_DEBUGFS
+ .add_debugfs = minstrel_ht_add_debugfs,
.add_sta_debugfs = minstrel_ht_add_sta_debugfs,
#endif
.get_expected_throughput = minstrel_ht_get_expected_throughput,
struct sta_info *sta;
int i = 0;
- list_for_each_entry_rcu(sta, &local->sta_list, list) {
+ list_for_each_entry_rcu(sta, &local->sta_list, list,
+ lockdep_is_held(&local->sta_mtx)) {
if (sdata != sta->sdata)
continue;
if (i < idx) {
mpext->data_seq = mp_opt->data_seq;
mpext->subflow_seq = mp_opt->subflow_seq;
mpext->dsn64 = mp_opt->dsn64;
+ mpext->data_fin = mp_opt->data_fin;
}
mpext->data_len = mp_opt->data_len;
mpext->use_map = 1;
}
-
- mpext->data_fin = mp_opt->data_fin;
}
void mptcp_write_options(__be32 *ptr, struct mptcp_out_options *opts)
nla_put_s32(skb, MPTCP_PM_ADDR_ATTR_IF_IDX, entry->ifindex))
goto nla_put_failure;
- if (addr->family == AF_INET)
- nla_put_in_addr(skb, MPTCP_PM_ADDR_ATTR_ADDR4,
- addr->addr.s_addr);
+ if (addr->family == AF_INET &&
+ nla_put_in_addr(skb, MPTCP_PM_ADDR_ATTR_ADDR4,
+ addr->addr.s_addr))
+ goto nla_put_failure;
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
- else if (addr->family == AF_INET6)
- nla_put_in6_addr(skb, MPTCP_PM_ADDR_ATTR_ADDR6, &addr->addr6);
+ else if (addr->family == AF_INET6 &&
+ nla_put_in6_addr(skb, MPTCP_PM_ADDR_ATTR_ADDR6, &addr->addr6))
+ goto nla_put_failure;
#endif
nla_nest_end(skb, attr);
return 0;
if (likely(!__mptcp_needs_tcp_fallback(msk)))
return NULL;
- if (msk->subflow) {
- release_sock((struct sock *)msk);
- return msk->subflow;
- }
-
- return NULL;
+ return msk->subflow;
}
static bool __mptcp_can_create_subflow(const struct mptcp_sock *msk)
goto out;
}
+fallback:
ssock = __mptcp_tcp_fallback(msk);
if (unlikely(ssock)) {
-fallback:
+ release_sock(sk);
pr_debug("fallback passthrough");
ret = sock_sendmsg(ssock, msg);
return ret >= 0 ? ret + copied : (copied ? copied : ret);
if (ret < 0)
break;
if (ret == 0 && unlikely(__mptcp_needs_tcp_fallback(msk))) {
+ /* Can happen for passive sockets:
+ * 3WHS negotiated MPTCP, but first packet after is
+ * plain TCP (e.g. due to middlebox filtering unknown
+ * options).
+ *
+ * Fall back to TCP.
+ */
release_sock(ssk);
- ssock = __mptcp_tcp_fallback(msk);
goto fallback;
}
ssock = __mptcp_tcp_fallback(msk);
if (unlikely(ssock)) {
fallback:
+ release_sock(sk);
pr_debug("fallback-read subflow=%p",
mptcp_subflow_ctx(ssock->sk));
copied = sock_recvmsg(ssock, msg, flags);
}
#endif
-struct sock *mptcp_sk_clone(const struct sock *sk, struct request_sock *req)
+struct sock *mptcp_sk_clone(const struct sock *sk,
+ const struct tcp_options_received *opt_rx,
+ struct request_sock *req)
{
struct mptcp_subflow_request_sock *subflow_req = mptcp_subflow_rsk(req);
struct sock *nsk = sk_clone_lock(sk, GFP_ATOMIC);
msk->subflow = NULL;
if (unlikely(mptcp_token_new_accept(subflow_req->token, nsk))) {
+ nsk->sk_state = TCP_CLOSE;
bh_unlock_sock(nsk);
/* we can't call into mptcp_close() here - possible BH context
- * free the sock directly
+ * free the sock directly.
+ * sk_clone_lock() sets nsk refcnt to two, hence call sk_free()
+ * too.
*/
- nsk->sk_prot->destroy(nsk);
+ sk_common_release(nsk);
sk_free(nsk);
return NULL;
}
msk->write_seq = subflow_req->idsn + 1;
atomic64_set(&msk->snd_una, msk->write_seq);
- if (subflow_req->remote_key_valid) {
+ if (opt_rx->mptcp.mp_capable) {
msk->can_ack = true;
- msk->remote_key = subflow_req->remote_key;
+ msk->remote_key = opt_rx->mptcp.sndr_key;
mptcp_crypto_key_sha(msk->remote_key, NULL, &ack_seq);
ack_seq++;
msk->ack_seq = ack_seq;
}
+ sock_reset_flag(nsk, SOCK_RCU_FREE);
/* will be fully established after successful MPC subflow creation */
inet_sk_state_store(nsk, TCP_SYN_RECV);
bh_unlock_sock(nsk);
newsk = new_mptcp_sock;
mptcp_copy_inaddrs(newsk, ssk);
list_add(&subflow->node, &msk->conn_list);
+ inet_sk_state_store(newsk, TCP_ESTABLISHED);
bh_unlock_sock(new_mptcp_sock);
*/
lock_sock(sk);
ssock = __mptcp_tcp_fallback(msk);
+ release_sock(sk);
if (ssock)
return tcp_setsockopt(ssock->sk, level, optname, optval,
optlen);
- release_sock(sk);
-
return -EOPNOTSUPP;
}
*/
lock_sock(sk);
ssock = __mptcp_tcp_fallback(msk);
+ release_sock(sk);
if (ssock)
return tcp_getsockopt(ssock->sk, level, optname, optval,
option);
- release_sock(sk);
-
return -EOPNOTSUPP;
}
goto unlock;
}
+ sock_set_flag(sock->sk, SOCK_RCU_FREE);
+
err = ssock->ops->listen(ssock, backlog);
inet_sk_state_store(sock->sk, inet_sk_state_load(ssock->sk));
if (!err)
struct tcp_request_sock sk;
u16 mp_capable : 1,
mp_join : 1,
- backup : 1,
- remote_key_valid : 1;
+ backup : 1;
u8 local_id;
u8 remote_id;
u64 local_key;
- u64 remote_key;
u64 idsn;
u32 token;
u32 ssn_offset;
int mptcp_proto_v6_init(void);
#endif
-struct sock *mptcp_sk_clone(const struct sock *sk, struct request_sock *req);
+struct sock *mptcp_sk_clone(const struct sock *sk,
+ const struct tcp_options_received *opt_rx,
+ struct request_sock *req);
void mptcp_get_options(const struct sk_buff *skb,
struct tcp_options_received *opt_rx);
subflow_req->mp_capable = 0;
subflow_req->mp_join = 0;
- subflow_req->remote_key_valid = 0;
#ifdef CONFIG_TCP_MD5SIG
/* no MPTCP if MD5SIG is enabled on this socket or we may run out of
return ret;
}
+static void mptcp_sock_destruct(struct sock *sk)
+{
+ /* if new mptcp socket isn't accepted, it is free'd
+ * from the tcp listener sockets request queue, linked
+ * from req->sk. The tcp socket is released.
+ * This calls the ULP release function which will
+ * also remove the mptcp socket, via
+ * sock_put(ctx->conn).
+ *
+ * Problem is that the mptcp socket will not be in
+ * SYN_RECV state and doesn't have SOCK_DEAD flag.
+ * Both result in warnings from inet_sock_destruct.
+ */
+
+ if (sk->sk_state == TCP_SYN_RECV) {
+ sk->sk_state = TCP_CLOSE;
+ WARN_ON_ONCE(sk->sk_socket);
+ sock_orphan(sk);
+ }
+
+ inet_sock_destruct(sk);
+}
+
+static void mptcp_force_close(struct sock *sk)
+{
+ inet_sk_state_store(sk, TCP_CLOSE);
+ sk_common_release(sk);
+}
+
+static void subflow_ulp_fallback(struct sock *sk,
+ struct mptcp_subflow_context *old_ctx)
+{
+ struct inet_connection_sock *icsk = inet_csk(sk);
+
+ mptcp_subflow_tcp_fallback(sk, old_ctx);
+ icsk->icsk_ulp_ops = NULL;
+ rcu_assign_pointer(icsk->icsk_ulp_data, NULL);
+ tcp_sk(sk)->is_mptcp = 0;
+}
+
static struct sock *subflow_syn_recv_sock(const struct sock *sk,
struct sk_buff *skb,
struct request_sock *req,
struct tcp_options_received opt_rx;
bool fallback_is_fatal = false;
struct sock *new_msk = NULL;
+ bool fallback = false;
struct sock *child;
pr_debug("listener=%p, req=%p, conn=%p", listener, req, listener->conn);
+ opt_rx.mptcp.mp_capable = 0;
if (tcp_rsk(req)->is_mptcp == 0)
goto create_child;
goto create_msk;
}
- opt_rx.mptcp.mp_capable = 0;
mptcp_get_options(skb, &opt_rx);
- if (opt_rx.mptcp.mp_capable) {
- subflow_req->remote_key = opt_rx.mptcp.sndr_key;
- subflow_req->remote_key_valid = 1;
- } else {
- subflow_req->mp_capable = 0;
+ if (!opt_rx.mptcp.mp_capable) {
+ fallback = true;
goto create_child;
}
create_msk:
- new_msk = mptcp_sk_clone(listener->conn, req);
+ new_msk = mptcp_sk_clone(listener->conn, &opt_rx, req);
if (!new_msk)
- subflow_req->mp_capable = 0;
+ fallback = true;
} else if (subflow_req->mp_join) {
fallback_is_fatal = true;
opt_rx.mptcp.mp_join = 0;
if (child && *own_req) {
struct mptcp_subflow_context *ctx = mptcp_subflow_ctx(child);
- /* we have null ctx on TCP fallback, which is fatal on
- * MPJ handshake
+ /* we need to fallback on ctx allocation failure and on pre-reqs
+ * checking above. In the latter scenario we additionally need
+ * to reset the context to non MPTCP status.
*/
- if (!ctx) {
+ if (!ctx || fallback) {
if (fallback_is_fatal)
goto close_child;
+
+ if (ctx) {
+ subflow_ulp_fallback(child, ctx);
+ kfree_rcu(ctx, rcu);
+ }
goto out;
}
/* new mpc subflow takes ownership of the newly
* created mptcp socket
*/
- inet_sk_state_store(new_msk, TCP_ESTABLISHED);
+ new_msk->sk_destruct = mptcp_sock_destruct;
mptcp_pm_new_connection(mptcp_sk(new_msk), 1);
ctx->conn = new_msk;
new_msk = NULL;
+
+ /* with OoO packets we can reach here without ingress
+ * mpc option
+ */
+ ctx->remote_key = opt_rx.mptcp.sndr_key;
+ ctx->fully_established = opt_rx.mptcp.mp_capable;
+ ctx->can_ack = opt_rx.mptcp.mp_capable;
} else if (ctx->mp_join) {
struct mptcp_sock *owner;
out:
/* dispose of the left over mptcp master, if any */
if (unlikely(new_msk))
- sock_put(new_msk);
+ mptcp_force_close(new_msk);
+
+ /* check for expected invariant - should never trigger, just help
+ * catching eariler subtle bugs
+ */
+ WARN_ON_ONCE(*own_req && child && tcp_sk(child)->is_mptcp &&
+ (!mptcp_subflow_ctx(child) ||
+ !mptcp_subflow_ctx(child)->conn));
return child;
close_child:
kfree_rcu(ctx, rcu);
}
-static void subflow_ulp_fallback(struct sock *sk,
- struct mptcp_subflow_context *old_ctx)
-{
- struct inet_connection_sock *icsk = inet_csk(sk);
-
- mptcp_subflow_tcp_fallback(sk, old_ctx);
- icsk->icsk_ulp_ops = NULL;
- rcu_assign_pointer(icsk->icsk_ulp_data, NULL);
- tcp_sk(sk)->is_mptcp = 0;
-}
-
static void subflow_ulp_clone(const struct request_sock *req,
struct sock *newsk,
const gfp_t priority)
* is fully established only after we receive the remote key
*/
new_ctx->mp_capable = 1;
- new_ctx->fully_established = subflow_req->remote_key_valid;
- new_ctx->can_ack = subflow_req->remote_key_valid;
- new_ctx->remote_key = subflow_req->remote_key;
new_ctx->local_key = subflow_req->local_key;
new_ctx->token = subflow_req->token;
new_ctx->ssn_offset = subflow_req->ssn_offset;
{
struct ip_set_type *type;
- list_for_each_entry_rcu(type, &ip_set_type_list, list)
+ list_for_each_entry_rcu(type, &ip_set_type_list, list,
+ lockdep_is_held(&ip_set_type_mutex))
if (STRNCMP(type->name, name) &&
(type->family == family ||
type->family == NFPROTO_UNSPEC) &&
down_write(&flow_table->flow_block_lock);
block_cb = flow_block_cb_lookup(block, cb, cb_priv);
- if (block_cb)
+ if (block_cb) {
list_del(&block_cb->list);
- else
+ flow_block_cb_free(block_cb);
+ } else {
WARN_ON(true);
+ }
up_write(&flow_table->flow_block_lock);
}
EXPORT_SYMBOL_GPL(nf_flow_table_offload_del_cb);
ret = nf_nat_register_fn(net, NFPROTO_IPV4, ops, nf_nat_ipv4_ops,
ARRAY_SIZE(nf_nat_ipv4_ops));
if (ret)
- nf_nat_ipv6_unregister_fn(net, ops);
-
+ nf_nat_unregister_fn(net, NFPROTO_IPV6, ops,
+ ARRAY_SIZE(nf_nat_ipv6_ops));
return ret;
}
EXPORT_SYMBOL_GPL(nf_nat_inet_register_fn);
continue;
if (!strcmp(set->name, i->name)) {
kfree(set->name);
+ set->name = NULL;
return -ENFILE;
}
}
if (flags & ~(NFT_SET_ANONYMOUS | NFT_SET_CONSTANT |
NFT_SET_INTERVAL | NFT_SET_TIMEOUT |
NFT_SET_MAP | NFT_SET_EVAL |
- NFT_SET_OBJECT))
- return -EINVAL;
+ NFT_SET_OBJECT | NFT_SET_CONCAT))
+ return -EOPNOTSUPP;
/* Only one of these operations is supported */
if ((flags & (NFT_SET_MAP | NFT_SET_OBJECT)) ==
(NFT_SET_MAP | NFT_SET_OBJECT))
objtype = ntohl(nla_get_be32(nla[NFTA_SET_OBJ_TYPE]));
if (objtype == NFT_OBJECT_UNSPEC ||
objtype > NFT_OBJECT_MAX)
- return -EINVAL;
+ return -EOPNOTSUPP;
} else if (flags & NFT_SET_OBJECT)
return -EINVAL;
else
{
const struct nft_lookup *priv = nft_expr_priv(expr);
const struct nft_set *set = priv->set;
- const struct nft_set_ext *ext;
+ const struct nft_set_ext *ext = NULL;
bool found;
found = set->ops->lookup(nft_net(pkt), set, ®s->data[priv->sreg],
return;
}
- if (set->flags & NFT_SET_MAP)
- nft_data_copy(®s->data[priv->dreg],
- nft_set_ext_data(ext), set->dlen);
+ if (ext) {
+ if (set->flags & NFT_SET_MAP)
+ nft_data_copy(®s->data[priv->dreg],
+ nft_set_ext_data(ext), set->dlen);
- nft_set_elem_update_expr(ext, regs, pkt);
+ nft_set_elem_update_expr(ext, regs, pkt);
+ }
}
static const struct nla_policy nft_lookup_policy[NFTA_LOOKUP_MAX + 1] = {
u32 idx, off;
nft_bitmap_location(set, key, &idx, &off);
- *ext = NULL;
return nft_bitmap_active(priv->bitmap, idx, off, genmask);
}
/* Detect overlaps as we descend the tree. Set the flag in these cases:
*
- * a1. |__ _ _? >|__ _ _ (insert start after existing start)
- * a2. _ _ __>| ?_ _ __| (insert end before existing end)
- * a3. _ _ ___| ?_ _ _>| (insert end after existing end)
- * a4. >|__ _ _ _ _ __| (insert start before existing end)
+ * a1. _ _ __>| ?_ _ __| (insert end before existing end)
+ * a2. _ _ ___| ?_ _ _>| (insert end after existing end)
+ * a3. _ _ ___? >|_ _ __| (insert start before existing end)
*
* and clear it later on, as we eventually reach the points indicated by
* '?' above, in the cases described below. We'll always meet these
* later, locally, due to tree ordering, and overlaps for the intervals
* that are the closest together are always evaluated last.
*
- * b1. |__ _ _! >|__ _ _ (insert start after existing end)
- * b2. _ _ __>| !_ _ __| (insert end before existing start)
- * b3. !_____>| (insert end after existing start)
+ * b1. _ _ __>| !_ _ __| (insert end before existing start)
+ * b2. _ _ ___| !_ _ _>| (insert end after existing start)
+ * b3. _ _ ___! >|_ _ __| (insert start after existing end)
*
- * Case a4. resolves to b1.:
+ * Case a3. resolves to b3.:
* - if the inserted start element is the leftmost, because the '0'
* element in the tree serves as end element
* - otherwise, if an existing end is found. Note that end elements are
* always inserted after corresponding start elements.
*
- * For a new, rightmost pair of elements, we'll hit cases b1. and b3.,
+ * For a new, rightmost pair of elements, we'll hit cases b3. and b2.,
* in that order.
*
* The flag is also cleared in two special cases:
p = &parent->rb_left;
if (nft_rbtree_interval_start(new)) {
- overlap = nft_rbtree_interval_start(rbe) &&
- nft_set_elem_active(&rbe->ext,
- genmask);
+ if (nft_rbtree_interval_end(rbe) &&
+ nft_set_elem_active(&rbe->ext, genmask))
+ overlap = false;
} else {
overlap = nft_rbtree_interval_end(rbe) &&
nft_set_elem_active(&rbe->ext,
pr_debug("checkentry targinfo%s\n", info->label);
+ if (info->send_nl_msg)
+ return -EOPNOTSUPP;
+
ret = idletimer_tg_helper((struct idletimer_tg_info *)info);
if(ret < 0)
{
Documentation/netlabel as well as the NetLabel SourceForge project
for configuration tools and additional documentation.
- * http://netlabel.sf.net
+ * https://github.com/netlabel/netlabel_tools
If you are unsure, say N.
/* refcount initialized at 1 */
spin_unlock_bh(&nr_node_list_lock);
+ nr_neigh_put(nr_neigh);
return 0;
}
nr_node_lock(nr_node);
struct hlist_head *head = &info->limits[i];
struct ovs_ct_limit *ct_limit;
- hlist_for_each_entry_rcu(ct_limit, head, hlist_node)
+ hlist_for_each_entry_rcu(ct_limit, head, hlist_node,
+ lockdep_ovsl_is_held())
kfree_rcu(ct_limit, rcu);
}
kfree(ovs_net->ct_limit_info->limits);
struct net *net;
LIST_HEAD(head);
- ovs_ct_exit(dnet);
ovs_lock();
+
+ ovs_ct_exit(dnet);
+
list_for_each_entry_safe(dp, dp_next, &ovs_net->dps, list_node)
__dp_destroy(dp);
node = NULL;
if (addr->sq_node == QRTR_NODE_BCAST) {
- enqueue_fn = qrtr_bcast_enqueue;
- if (addr->sq_port != QRTR_PORT_CTRL) {
+ if (addr->sq_port != QRTR_PORT_CTRL &&
+ qrtr_local_nid != QRTR_NODE_BCAST) {
release_sock(sk);
return -ENOTCONN;
}
+ enqueue_fn = qrtr_bcast_enqueue;
} else if (addr->sq_node == ipc->us.sq_node) {
enqueue_fn = qrtr_local_enqueue;
} else {
- enqueue_fn = qrtr_node_enqueue;
node = qrtr_node_lookup(addr->sq_node);
if (!node) {
release_sock(sk);
return -ECONNRESET;
}
+ enqueue_fn = qrtr_node_enqueue;
}
plen = (len + 3) & ~3;
/*
- * Copyright (c) 2006 Oracle. All rights reserved.
+ * Copyright (c) 2006, 2020 Oracle and/or its affiliates.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
if (rm->rdma.op_active)
rds_rdma_free_op(&rm->rdma);
if (rm->rdma.op_rdma_mr)
- rds_mr_put(rm->rdma.op_rdma_mr);
+ kref_put(&rm->rdma.op_rdma_mr->r_kref, __rds_put_mr_final);
if (rm->atomic.op_active)
rds_atomic_free_op(&rm->atomic);
if (rm->atomic.op_rdma_mr)
- rds_mr_put(rm->atomic.op_rdma_mr);
+ kref_put(&rm->atomic.op_rdma_mr->r_kref, __rds_put_mr_final);
}
void rds_message_put(struct rds_message *rm)
/*
* RDS ops use this to grab SG entries from the rm's sg pool.
*/
-struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents,
- int *ret)
+struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents)
{
struct scatterlist *sg_first = (struct scatterlist *) &rm[1];
struct scatterlist *sg_ret;
- if (WARN_ON(!ret))
- return NULL;
-
if (nents <= 0) {
pr_warn("rds: alloc sgs failed! nents <= 0\n");
- *ret = -EINVAL;
- return NULL;
+ return ERR_PTR(-EINVAL);
}
if (rm->m_used_sgs + nents > rm->m_total_sgs) {
pr_warn("rds: alloc sgs failed! total %d used %d nents %d\n",
rm->m_total_sgs, rm->m_used_sgs, nents);
- *ret = -ENOMEM;
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
sg_ret = &sg_first[rm->m_used_sgs];
unsigned int i;
int num_sgs = DIV_ROUND_UP(total_len, PAGE_SIZE);
int extra_bytes = num_sgs * sizeof(struct scatterlist);
- int ret;
rm = rds_message_alloc(extra_bytes, GFP_NOWAIT);
if (!rm)
set_bit(RDS_MSG_PAGEVEC, &rm->m_flags);
rm->m_inc.i_hdr.h_len = cpu_to_be32(total_len);
rm->data.op_nents = DIV_ROUND_UP(total_len, PAGE_SIZE);
- rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs, &ret);
- if (!rm->data.op_sg) {
+ rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs);
+ if (IS_ERR(rm->data.op_sg)) {
rds_message_put(rm);
- return ERR_PTR(ret);
+ return ERR_CAST(rm->data.op_sg);
}
for (i = 0; i < rm->data.op_nents; ++i) {
/*
- * Copyright (c) 2007, 2017 Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2007, 2020 Oracle and/or its affiliates.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
if (insert) {
rb_link_node(&insert->r_rb_node, parent, p);
rb_insert_color(&insert->r_rb_node, root);
- refcount_inc(&insert->r_refcount);
+ kref_get(&insert->r_kref);
}
return NULL;
}
unsigned long flags;
rdsdebug("RDS: destroy mr key is %x refcnt %u\n",
- mr->r_key, refcount_read(&mr->r_refcount));
-
- if (test_and_set_bit(RDS_MR_DEAD, &mr->r_state))
- return;
+ mr->r_key, kref_read(&mr->r_kref));
spin_lock_irqsave(&rs->rs_rdma_lock, flags);
if (!RB_EMPTY_NODE(&mr->r_rb_node))
mr->r_trans->free_mr(trans_private, mr->r_invalidate);
}
-void __rds_put_mr_final(struct rds_mr *mr)
+void __rds_put_mr_final(struct kref *kref)
{
+ struct rds_mr *mr = container_of(kref, struct rds_mr, r_kref);
+
rds_destroy_mr(mr);
kfree(mr);
}
rb_erase(&mr->r_rb_node, &rs->rs_rdma_keys);
RB_CLEAR_NODE(&mr->r_rb_node);
spin_unlock_irqrestore(&rs->rs_rdma_lock, flags);
- rds_destroy_mr(mr);
- rds_mr_put(mr);
+ kref_put(&mr->r_kref, __rds_put_mr_final);
spin_lock_irqsave(&rs->rs_rdma_lock, flags);
}
spin_unlock_irqrestore(&rs->rs_rdma_lock, flags);
goto out;
}
- refcount_set(&mr->r_refcount, 1);
+ kref_init(&mr->r_kref);
RB_CLEAR_NODE(&mr->r_rb_node);
mr->r_trans = rs->rs_transport;
mr->r_sock = rs;
rdsdebug("RDS: get_mr key is %x\n", mr->r_key);
if (mr_ret) {
- refcount_inc(&mr->r_refcount);
+ kref_get(&mr->r_kref);
*mr_ret = mr;
}
out:
kfree(pages);
if (mr)
- rds_mr_put(mr);
+ kref_put(&mr->r_kref, __rds_put_mr_final);
return ret;
}
if (!mr)
return -EINVAL;
- /*
- * call rds_destroy_mr() ourselves so that we're sure it's done by the time
- * we return. If we let rds_mr_put() do it it might not happen until
- * someone else drops their ref.
- */
- rds_destroy_mr(mr);
- rds_mr_put(mr);
+ kref_put(&mr->r_kref, __rds_put_mr_final);
return 0;
}
return;
}
+ /* Get a reference so that the MR won't go away before calling
+ * sync_mr() below.
+ */
+ kref_get(&mr->r_kref);
+
+ /* If it is going to be freed, remove it from the tree now so
+ * that no other thread can find it and free it.
+ */
if (mr->r_use_once || force) {
rb_erase(&mr->r_rb_node, &rs->rs_rdma_keys);
RB_CLEAR_NODE(&mr->r_rb_node);
if (mr->r_trans->sync_mr)
mr->r_trans->sync_mr(mr->r_trans_private, DMA_FROM_DEVICE);
+ /* Release the reference held above. */
+ kref_put(&mr->r_kref, __rds_put_mr_final);
+
/* If the MR was marked as invalidate, this will
* trigger an async flush. */
- if (zot_me) {
- rds_destroy_mr(mr);
- rds_mr_put(mr);
- }
+ if (zot_me)
+ kref_put(&mr->r_kref, __rds_put_mr_final);
}
void rds_rdma_free_op(struct rm_rdma_op *ro)
unsigned int i;
if (ro->op_odp_mr) {
- rds_mr_put(ro->op_odp_mr);
+ kref_put(&ro->op_odp_mr->r_kref, __rds_put_mr_final);
} else {
for (i = 0; i < ro->op_nents; i++) {
struct page *page = sg_page(&ro->op_sg[i]);
op->op_odp_mr = NULL;
WARN_ON(!nr_pages);
- op->op_sg = rds_message_alloc_sgs(rm, nr_pages, &ret);
- if (!op->op_sg)
+ op->op_sg = rds_message_alloc_sgs(rm, nr_pages);
+ if (IS_ERR(op->op_sg)) {
+ ret = PTR_ERR(op->op_sg);
goto out_pages;
+ }
if (op->op_notify || op->op_recverr) {
/* We allocate an uninitialized notifier here, because
goto out_pages;
}
RB_CLEAR_NODE(&local_odp_mr->r_rb_node);
- refcount_set(&local_odp_mr->r_refcount, 1);
+ kref_init(&local_odp_mr->r_kref);
local_odp_mr->r_trans = rs->rs_transport;
local_odp_mr->r_sock = rs;
local_odp_mr->r_trans_private =
if (!mr)
err = -EINVAL; /* invalid r_key */
else
- refcount_inc(&mr->r_refcount);
+ kref_get(&mr->r_kref);
spin_unlock_irqrestore(&rs->rs_rdma_lock, flags);
if (mr) {
rm->atomic.op_silent = !!(args->flags & RDS_RDMA_SILENT);
rm->atomic.op_active = 1;
rm->atomic.op_recverr = rs->rs_recverr;
- rm->atomic.op_sg = rds_message_alloc_sgs(rm, 1, &ret);
- if (!rm->atomic.op_sg)
+ rm->atomic.op_sg = rds_message_alloc_sgs(rm, 1);
+ if (IS_ERR(rm->atomic.op_sg)) {
+ ret = PTR_ERR(rm->atomic.op_sg);
goto err;
+ }
/* verify 8 byte-aligned */
if (args->local_addr & 0x7) {
struct rds_mr {
struct rb_node r_rb_node;
- refcount_t r_refcount;
+ struct kref r_kref;
u32 r_key;
/* A copy of the creation flags */
unsigned int r_invalidate:1;
unsigned int r_write:1;
- /* This is for RDS_MR_DEAD.
- * It would be nice & consistent to make this part of the above
- * bit field here, but we need to use test_and_set_bit.
- */
- unsigned long r_state;
struct rds_sock *r_sock; /* back pointer to the socket that owns us */
struct rds_transport *r_trans;
void *r_trans_private;
};
-/* Flags for mr->r_state */
-#define RDS_MR_DEAD 0
-
static inline rds_rdma_cookie_t rds_rdma_make_cookie(u32 r_key, u32 offset)
{
return r_key | (((u64) offset) << 32);
/* message.c */
struct rds_message *rds_message_alloc(unsigned int nents, gfp_t gfp);
-struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents,
- int *ret);
+struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents);
int rds_message_copy_from_user(struct rds_message *rm, struct iov_iter *from,
bool zcopy);
struct rds_message *rds_message_map_pages(unsigned long *page_addrs, unsigned int total_len);
int rds_cmsg_atomic(struct rds_sock *rs, struct rds_message *rm,
struct cmsghdr *cmsg);
-void __rds_put_mr_final(struct rds_mr *mr);
-static inline void rds_mr_put(struct rds_mr *mr)
-{
- if (refcount_dec_and_test(&mr->r_refcount))
- __rds_put_mr_final(mr);
-}
+void __rds_put_mr_final(struct kref *kref);
static inline bool rds_destroy_pending(struct rds_connection *conn)
{
/* Attach data to the rm */
if (payload_len) {
- rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs, &ret);
- if (!rm->data.op_sg)
+ rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs);
+ if (IS_ERR(rm->data.op_sg)) {
+ ret = PTR_ERR(rm->data.op_sg);
goto out;
+ }
ret = rds_message_copy_from_user(rm, &msg->msg_iter, zcopy);
if (ret)
goto out;
goto error;
}
- /* we want to set the don't fragment bit */
- opt = IPV6_PMTUDISC_DO;
- ret = kernel_setsockopt(local->socket, SOL_IPV6, IPV6_MTU_DISCOVER,
- (char *) &opt, sizeof(opt));
- if (ret < 0) {
- _debug("setsockopt failed");
- goto error;
- }
-
/* Fall through and set IPv4 options too otherwise we don't get
* errors from IPv4 packets sent through the IPv6 socket.
*/
skb->tstamp = ktime_get_real();
switch (conn->params.local->srx.transport.family) {
+ case AF_INET6:
case AF_INET:
opt = IP_PMTUDISC_DONT;
- ret = kernel_setsockopt(conn->params.local->socket,
- SOL_IP, IP_MTU_DISCOVER,
- (char *)&opt, sizeof(opt));
- if (ret == 0) {
- ret = kernel_sendmsg(conn->params.local->socket, &msg,
- iov, 2, len);
- conn->params.peer->last_tx_at = ktime_get_seconds();
-
- opt = IP_PMTUDISC_DO;
- kernel_setsockopt(conn->params.local->socket, SOL_IP,
- IP_MTU_DISCOVER,
- (char *)&opt, sizeof(opt));
- }
- break;
-
-#ifdef CONFIG_AF_RXRPC_IPV6
- case AF_INET6:
- opt = IPV6_PMTUDISC_DONT;
- ret = kernel_setsockopt(conn->params.local->socket,
- SOL_IPV6, IPV6_MTU_DISCOVER,
- (char *)&opt, sizeof(opt));
- if (ret == 0) {
- ret = kernel_sendmsg(conn->params.local->socket, &msg,
- iov, 2, len);
- conn->params.peer->last_tx_at = ktime_get_seconds();
-
- opt = IPV6_PMTUDISC_DO;
- kernel_setsockopt(conn->params.local->socket,
- SOL_IPV6, IPV6_MTU_DISCOVER,
- (char *)&opt, sizeof(opt));
- }
+ kernel_setsockopt(conn->params.local->socket,
+ SOL_IP, IP_MTU_DISCOVER,
+ (char *)&opt, sizeof(opt));
+ ret = kernel_sendmsg(conn->params.local->socket, &msg,
+ iov, 2, len);
+ conn->params.peer->last_tx_at = ktime_get_seconds();
+
+ opt = IP_PMTUDISC_DO;
+ kernel_setsockopt(conn->params.local->socket,
+ SOL_IP, IP_MTU_DISCOVER,
+ (char *)&opt, sizeof(opt));
break;
-#endif
default:
BUG();
skb_ext_del(skb, TC_SKB_EXT);
tp = rcu_dereference_bh(fchain->filter_chain);
+ last_executed_chain = fchain->index;
}
ret = __tcf_classify(skb, tp, orig_tp, res, compat_mode,
if (q->skip_sock_check)
goto skip;
- if (!sk)
+ if (!sk || !sk_fullsock(sk))
return false;
if (!sock_flag(sk, SOCK_TXTIME))
struct sock_exterr_skb *serr;
struct sk_buff *clone;
ktime_t txtime = skb->tstamp;
+ struct sock *sk = skb->sk;
- if (!skb->sk || !(skb->sk->sk_txtime_report_errors))
+ if (!sk || !sk_fullsock(sk) || !(sk->sk_txtime_report_errors))
return;
clone = skb_clone(skb, GFP_ATOMIC);
serr->ee.ee_data = (txtime >> 32); /* high part of tstamp */
serr->ee.ee_info = txtime; /* low part of tstamp */
- if (sock_queue_err_skb(skb->sk, clone))
+ if (sock_queue_err_skb(sk, clone))
kfree_skb(clone);
}
struct sctp_chunk *retval;
__u32 ctsn;
- ctsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map);
+ if (chunk && chunk->asoc)
+ ctsn = sctp_tsnmap_get_ctsn(&chunk->asoc->peer.tsn_map);
+ else
+ ctsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map);
+
shut.cum_tsn_ack = htonl(ctsn);
retval = sctp_make_control(asoc, SCTP_CID_SHUTDOWN, 0,
*/
sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
return sctp_sf_do_9_2_start_shutdown(net, ep, asoc,
- SCTP_ST_CHUNK(0), NULL,
+ SCTP_ST_CHUNK(0), repl,
commands);
} else {
sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
* in the Cumulative TSN Ack field the last sequential TSN it
* has received from the peer.
*/
- reply = sctp_make_shutdown(asoc, NULL);
+ reply = sctp_make_shutdown(asoc, arg);
if (!reply)
goto nomem;
disposition = SCTP_DISPOSITION_CONSUME;
if (sctp_outq_is_empty(&asoc->outqueue)) {
disposition = sctp_sf_do_9_2_start_shutdown(net, ep, asoc, type,
- arg, commands);
+ NULL, commands);
}
return disposition;
{
struct cache_head *ch = NULL;
struct hlist_head *head = NULL;
- struct hlist_node *tmp = NULL;
int i = 0;
spin_lock(&detail->hash_lock);
dprintk("RPC: %d entries in %s cache\n", detail->entries, detail->name);
for (i = 0; i < detail->hash_size; i++) {
head = &detail->hash_table[i];
- hlist_for_each_entry_safe(ch, tmp, head, cache_list) {
+ while (!hlist_empty(head)) {
+ ch = hlist_entry(head->first, struct cache_head,
+ cache_list);
sunrpc_begin_cache_remove_entry(ch, detail);
spin_unlock(&detail->hash_lock);
sunrpc_end_cache_remove_entry(ch, detail);
if (!xprt)
goto out;
- /* release the receive skb before sending the reply */
- xprt->xpt_ops->xpo_release_rqst(rqstp);
-
/* calculate over-all length */
xb = &rqstp->rq_res;
xb->len = xb->head[0].iov_len +
dprintk("svc: svc_delete_xprt(%p)\n", xprt);
xprt->xpt_ops->xpo_detach(xprt);
+ if (xprt->xpt_bc_xprt)
+ xprt->xpt_bc_xprt->ops->close(xprt->xpt_bc_xprt);
spin_lock_bh(&serv->sv_lock);
list_del_init(&xprt->xpt_list);
unsigned int uninitialized_var(sent);
int err;
+ svc_release_udp_skb(rqstp);
+
svc_set_cmsg_data(rqstp, cmh);
err = xprt_sock_sendmsg(svsk->sk_sock, &msg, xdr, 0, 0, &sent);
unsigned int uninitialized_var(sent);
int err;
+ svc_release_skb(rqstp);
+
err = xprt_sock_sendmsg(svsk->sk_sock, &msg, xdr, 0, marker, &sent);
xdr_free_bvec(xdr);
if (err < 0 || sent != (xdr->len + sizeof(marker)))
xprt_rdma_bc_close(struct rpc_xprt *xprt)
{
dprintk("svcrdma: %s: xprt %p\n", __func__, xprt);
+
+ xprt_disconnect_done(xprt);
xprt->cwnd = RPC_CWNDSHIFT;
}
svc_rdma_recv_ctxt_destroy(rdma, ctxt);
}
+/**
+ * svc_rdma_release_rqst - Release transport-specific per-rqst resources
+ * @rqstp: svc_rqst being released
+ *
+ * Ensure that the recv_ctxt is released whether or not a Reply
+ * was sent. For example, the client could close the connection,
+ * or svc_process could drop an RPC, before the Reply is sent.
+ */
+void svc_rdma_release_rqst(struct svc_rqst *rqstp)
+{
+ struct svc_rdma_recv_ctxt *ctxt = rqstp->rq_xprt_ctxt;
+ struct svc_xprt *xprt = rqstp->rq_xprt;
+ struct svcxprt_rdma *rdma =
+ container_of(xprt, struct svcxprt_rdma, sc_xprt);
+
+ rqstp->rq_xprt_ctxt = NULL;
+ if (ctxt)
+ svc_rdma_recv_ctxt_put(rdma, ctxt);
+}
+
static int __svc_rdma_post_recv(struct svcxprt_rdma *rdma,
struct svc_rdma_recv_ctxt *ctxt)
{
__be32 *p;
int ret;
+ rqstp->rq_xprt_ctxt = NULL;
+
spin_lock(&rdma_xprt->sc_rq_dto_lock);
ctxt = svc_rdma_next_recv_ctxt(&rdma_xprt->sc_read_complete_q);
if (ctxt) {
if (atomic_sub_return(cc->cc_sqecount,
&rdma->sc_sq_avail) > 0) {
ret = ib_post_send(rdma->sc_qp, first_wr, &bad_wr);
- trace_svcrdma_post_rw(&cc->cc_cqe,
- cc->cc_sqecount, ret);
if (ret)
break;
return 0;
trace_svcrdma_sq_retry(rdma);
} while (1);
+ trace_svcrdma_sq_post_err(rdma, ret);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
/* If even one was posted, there will be a completion. */
}
svc_xprt_get(&rdma->sc_xprt);
+ trace_svcrdma_post_send(wr);
ret = ib_post_send(rdma->sc_qp, wr, NULL);
- trace_svcrdma_post_send(wr, ret);
- if (ret) {
- set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
- svc_xprt_put(&rdma->sc_xprt);
- wake_up(&rdma->sc_send_wait);
- }
- break;
+ if (ret)
+ break;
+ return 0;
}
+
+ trace_svcrdma_sq_post_err(rdma, ret);
+ set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ svc_xprt_put(&rdma->sc_xprt);
+ wake_up(&rdma->sc_send_wait);
return ret;
}
ret = svc_rdma_send_reply_msg(rdma, sctxt, rctxt, rqstp);
if (ret < 0)
goto err1;
- ret = 0;
-
-out:
- rqstp->rq_xprt_ctxt = NULL;
- svc_rdma_recv_ctxt_put(rdma, rctxt);
- return ret;
+ return 0;
err2:
if (ret != -E2BIG && ret != -EINVAL)
ret = svc_rdma_send_error_msg(rdma, sctxt, rqstp);
if (ret < 0)
goto err1;
- ret = 0;
- goto out;
+ return 0;
err1:
svc_rdma_send_ctxt_put(rdma, sctxt);
err0:
trace_svcrdma_send_failed(rqstp, ret);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
- ret = -ENOTCONN;
- goto out;
+ return -ENOTCONN;
}
/**
struct sockaddr *sa, int salen,
int flags);
static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt);
-static void svc_rdma_release_rqst(struct svc_rqst *);
static void svc_rdma_detach(struct svc_xprt *xprt);
static void svc_rdma_free(struct svc_xprt *xprt);
static int svc_rdma_has_wspace(struct svc_xprt *xprt);
return NULL;
}
-static void svc_rdma_release_rqst(struct svc_rqst *rqstp)
-{
-}
-
/*
* When connected, an svc_xprt has at least two references:
*
static void bc_close(struct rpc_xprt *xprt)
{
+ xprt_disconnect_done(xprt);
}
/*
case -EBUSY:
this_cpu_inc(stats->stat[STAT_ASYNC]);
*skb = NULL;
+ tipc_aead_put(aead);
return rc;
default:
this_cpu_inc(stats->stat[STAT_NOK]);
/* Enter fast recovery */
if (unlikely(retransmitted)) {
l->ssthresh = max_t(u16, l->window / 2, 300);
- l->window = l->ssthresh;
+ l->window = min_t(u16, l->ssthresh, l->window);
return;
}
/* Enter slow start */
n = tipc_node_find_by_id(net, ehdr->id);
}
tipc_crypto_rcv(net, (n) ? n->crypto_rx : NULL, &skb, b);
+ tipc_node_put(n);
if (!skb)
return;
/* Check/update node state before receiving */
if (unlikely(skb)) {
if (unlikely(skb_linearize(skb)))
- goto discard;
+ goto out_node_put;
tipc_node_write_lock(n);
if (tipc_node_check_state(n, skb, bearer_id, &xmitq)) {
if (le->link) {
if (!skb_queue_empty(&xmitq))
tipc_bearer_xmit(net, bearer_id, &xmitq, &le->maddr, n);
+out_node_put:
tipc_node_put(n);
discard:
kfree_skb(skb);
TLS_NUM_PROTS,
};
-static struct proto *saved_tcpv6_prot;
+static const struct proto *saved_tcpv6_prot;
static DEFINE_MUTEX(tcpv6_prot_mutex);
-static struct proto *saved_tcpv4_prot;
+static const struct proto *saved_tcpv4_prot;
static DEFINE_MUTEX(tcpv4_prot_mutex);
static struct proto tls_prots[TLS_NUM_PROTS][TLS_NUM_CONFIG][TLS_NUM_CONFIG];
static struct proto_ops tls_sw_proto_ops;
[NL80211_ATTR_HE_CAPABILITY] = { .type = NLA_BINARY,
.len = NL80211_HE_MAX_CAPABILITY_LEN },
- [NL80211_ATTR_FTM_RESPONDER] = {
- .type = NLA_NESTED,
- .validation_data = nl80211_ftm_responder_policy,
- },
+ [NL80211_ATTR_FTM_RESPONDER] =
+ NLA_POLICY_NESTED(nl80211_ftm_responder_policy),
[NL80211_ATTR_TIMEOUT] = NLA_POLICY_MIN(NLA_U32, 1),
[NL80211_ATTR_PEER_MEASUREMENTS] =
NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
goto drop;
}
- if (!pskb_may_pull(skb, 1))
+ if (!pskb_may_pull(skb, 1)) {
+ x25_neigh_put(nb);
return 0;
+ }
switch (skb->data[0]) {
u32 chunk_size = mr->chunk_size, headroom = mr->headroom;
unsigned int chunks, chunks_per_page;
u64 addr = mr->addr, size = mr->len;
- int size_chk, err;
+ int err;
if (chunk_size < XDP_UMEM_MIN_CHUNK_SIZE || chunk_size > PAGE_SIZE) {
/* Strictly speaking we could support this, if:
return -EINVAL;
}
- size_chk = chunk_size - headroom - XDP_PACKET_HEADROOM;
- if (size_chk < 0)
+ if (headroom >= chunk_size - XDP_PACKET_HEADROOM)
return -EINVAL;
umem->address = (unsigned long)addr;
u64 page_start = addr & ~(PAGE_SIZE - 1);
u64 first_len = PAGE_SIZE - (addr - page_start);
- memcpy(to_buf, from_buf, first_len + metalen);
- memcpy(next_pg_addr, from_buf + first_len, len - first_len);
+ memcpy(to_buf, from_buf, first_len);
+ memcpy(next_pg_addr, from_buf + first_len,
+ len + metalen - first_len);
return;
}
return -EINVAL;
return remap_vmalloc_range_partial(vma, vma->vm_start,
- mdev_state->memblk,
+ mdev_state->memblk, 0,
vma->vm_end - vma->vm_start);
}
endef
$(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
- $(call if_changed_rule,dtc)
+ $(call if_changed_rule,dtc,yaml)
dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
(?:kv|k|v)[czm]alloc(?:_node|_array)? |
kstrdup(?:_const)? |
kmemdup(?:_nul)?) |
- (?:\w+)?alloc_skb(?:ip_align)? |
+ (?:\w+)?alloc_skb(?:_ip_align)? |
# dev_alloc_skb/netdev_alloc_skb, et al
dma_alloc_coherent
)};
# If no prefix forced, use the default CONFIG_
CONFIG_="${CONFIG_-CONFIG_}"
+# We use an uncommon delimiter for sed substitutions
+SED_DELIM=$(echo -en "\001")
+
usage() {
cat >&2 <<EOL
Manipulate options in a .config file from the command line.
local infile="$3"
local tmpfile="$infile.swp"
- sed -e "s:$before:$after:" "$infile" >"$tmpfile"
+ sed -e "s$SED_DELIM$before$SED_DELIM$after$SED_DELIM" "$infile" >"$tmpfile"
# replace original file with the edited one
mv "$tmpfile" "$infile"
}
my $warn = 0;
if (! -d ".git") {
- printf "Warning: can't check if file exists, as this is not a git tree";
+ printf "Warning: can't check if file exists, as this is not a git tree\n";
exit 0;
}
HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
-ifneq ($(CHECK_DTBS),)
+ifneq ($(CHECK_DT_BINDING)$(CHECK_DTBS),)
$(error dtc needs libyaml for DT schema validation support. \
Install the necessary libyaml development package.)
endif
if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
# pointer-to-function
- print $1 . $parameter . ") (" . $2;
+ print $1 . $parameter . ") (" . $2 . ")";
} else {
print $type . " " . $parameter;
}
n = key_serial_next(p, v);
if (n)
*_pos = key_node_serial(n);
+ else
+ (*_pos)++;
return n;
}
static int selinux_netlink_send(struct sock *sk, struct sk_buff *skb)
{
- int err = 0;
- u32 perm;
+ int rc = 0;
+ unsigned int msg_len;
+ unsigned int data_len = skb->len;
+ unsigned char *data = skb->data;
struct nlmsghdr *nlh;
struct sk_security_struct *sksec = sk->sk_security;
+ u16 sclass = sksec->sclass;
+ u32 perm;
- if (skb->len < NLMSG_HDRLEN) {
- err = -EINVAL;
- goto out;
- }
- nlh = nlmsg_hdr(skb);
+ while (data_len >= nlmsg_total_size(0)) {
+ nlh = (struct nlmsghdr *)data;
+
+ /* NOTE: the nlmsg_len field isn't reliably set by some netlink
+ * users which means we can't reject skb's with bogus
+ * length fields; our solution is to follow what
+ * netlink_rcv_skb() does and simply skip processing at
+ * messages with length fields that are clearly junk
+ */
+ if (nlh->nlmsg_len < NLMSG_HDRLEN || nlh->nlmsg_len > data_len)
+ return 0;
- err = selinux_nlmsg_lookup(sksec->sclass, nlh->nlmsg_type, &perm);
- if (err) {
- if (err == -EINVAL) {
+ rc = selinux_nlmsg_lookup(sclass, nlh->nlmsg_type, &perm);
+ if (rc == 0) {
+ rc = sock_has_perm(sk, perm);
+ if (rc)
+ return rc;
+ } else if (rc == -EINVAL) {
+ /* -EINVAL is a missing msg/perm mapping */
pr_warn_ratelimited("SELinux: unrecognized netlink"
- " message: protocol=%hu nlmsg_type=%hu sclass=%s"
- " pid=%d comm=%s\n",
- sk->sk_protocol, nlh->nlmsg_type,
- secclass_map[sksec->sclass - 1].name,
- task_pid_nr(current), current->comm);
- if (!enforcing_enabled(&selinux_state) ||
- security_get_allow_unknown(&selinux_state))
- err = 0;
+ " message: protocol=%hu nlmsg_type=%hu sclass=%s"
+ " pid=%d comm=%s\n",
+ sk->sk_protocol, nlh->nlmsg_type,
+ secclass_map[sclass - 1].name,
+ task_pid_nr(current), current->comm);
+ if (enforcing_enabled(&selinux_state) &&
+ !security_get_allow_unknown(&selinux_state))
+ return rc;
+ rc = 0;
+ } else if (rc == -ENOENT) {
+ /* -ENOENT is a missing socket/class mapping, ignore */
+ rc = 0;
+ } else {
+ return rc;
}
- /* Ignore */
- if (err == -ENOENT)
- err = 0;
- goto out;
+ /* move to the next message after applying netlink padding */
+ msg_len = NLMSG_ALIGN(nlh->nlmsg_len);
+ if (msg_len >= data_len)
+ return 0;
+ data_len -= msg_len;
+ data += msg_len;
}
- err = sock_has_perm(sk, perm);
-out:
- return err;
+ return rc;
}
static void ipc_init_security(struct ipc_security_struct *isec, u16 sclass)
p->cond_list = kcalloc(len, sizeof(*p->cond_list), GFP_KERNEL);
if (!p->cond_list)
- return rc;
+ return -ENOMEM;
rc = avtab_alloc(&(p->te_cond_avtab), p->te_avtab.nel);
if (rc)
if (!str)
return -ENOMEM;
- /* it's expected the caller should free the str */
- *strp = str;
-
rc = next_entry(str, fp, len);
- if (rc)
+ if (rc) {
+ kfree(str);
return rc;
+ }
str[len] = '\0';
+ *strp = str;
return 0;
}
select SND_HDA_CORE
config SND_HDA_PREALLOC_SIZE
- int "Pre-allocated buffer size for HD-audio driver" if !SND_DMA_SGBUF
+ int "Pre-allocated buffer size for HD-audio driver"
range 0 32768
- default 0 if SND_DMA_SGBUF
+ default 2048 if SND_DMA_SGBUF
default 64 if !SND_DMA_SGBUF
help
Specifies the default pre-allocated buffer-size in kB for the
HD-audio driver. A larger buffer (e.g. 2048) is preferred
for systems using PulseAudio. The default 64 is chosen just
for compatibility reasons.
- On x86 systems, the default is zero as we need no preallocation.
+ On x86 systems, the default is 2048 as a reasonable value for
+ most of modern systems.
Note that the pre-allocation size can be changed dynamically
via a proc file (/proc/asound/card*/pcm*/sub*/prealloc), too.
static int src_put_rsc_ctrl_blk(void *blk)
{
- kfree((struct src_rsc_ctrl_blk *)blk);
+ kfree(blk);
return 0;
}
static int src_mgr_put_ctrl_blk(void *blk)
{
- kfree((struct src_mgr_ctrl_blk *)blk);
+ kfree(blk);
return 0;
}
static int srcimp_mgr_put_ctrl_blk(void *blk)
{
- kfree((struct srcimp_mgr_ctrl_blk *)blk);
+ kfree(blk);
return 0;
}
static int amixer_rsc_put_ctrl_blk(void *blk)
{
- kfree((struct amixer_rsc_ctrl_blk *)blk);
+ kfree(blk);
return 0;
}
static int dai_put_ctrl_blk(void *blk)
{
- kfree((struct dai_ctrl_blk *)blk);
+ kfree(blk);
return 0;
}
static int dao_put_ctrl_blk(void *blk)
{
- kfree((struct dao_ctrl_blk *)blk);
+ kfree(blk);
return 0;
}
static int daio_mgr_put_ctrl_blk(void *blk)
{
- kfree((struct daio_mgr_ctrl_blk *)blk);
+ kfree(blk);
return 0;
}
struct hda_codec *codec =
container_of(work, struct hda_codec, jackpoll_work.work);
- snd_hda_jack_set_dirty_all(codec);
- snd_hda_jack_poll_all(codec);
+ /* for non-polling trigger: we need nothing if already powered on */
+ if (!codec->jackpoll_interval && snd_hdac_is_power_on(&codec->core))
+ return;
+
+ /* the power-up/down sequence triggers the runtime resume */
+ snd_hda_power_up_pm(codec);
+ /* update jacks manually if polling is required, too */
+ if (codec->jackpoll_interval) {
+ snd_hda_jack_set_dirty_all(codec);
+ snd_hda_jack_poll_all(codec);
+ }
+ snd_hda_power_down_pm(codec);
if (!codec->jackpoll_interval)
return;
static int hda_codec_force_resume(struct device *dev)
{
struct hda_codec *codec = dev_to_hda_codec(dev);
- bool forced_resume = !codec->relaxed_resume && codec->jacktbl.used;
int ret;
- /* The get/put pair below enforces the runtime resume even if the
- * device hasn't been used at suspend time. This trick is needed to
- * update the jack state change during the sleep.
- */
- if (forced_resume)
- pm_runtime_get_noresume(dev);
ret = pm_runtime_force_resume(dev);
- if (forced_resume)
- pm_runtime_put(dev);
+ /* schedule jackpoll work for jack detection update */
+ if (codec->jackpoll_interval ||
+ (pm_runtime_suspended(dev) && hda_codec_need_resume(codec)))
+ schedule_delayed_work(&codec->jackpoll_work,
+ codec->jackpoll_interval);
return ret;
}
if (status && from_rt) {
list_for_each_codec(codec, &chip->bus)
- if (status & (1 << codec->addr))
+ if (!codec->relaxed_resume &&
+ (status & (1 << codec->addr)))
schedule_delayed_work(&codec->jackpoll_work,
codec->jackpoll_interval);
}
chip = card->private_data;
bus = azx_bus(chip);
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
- __azx_runtime_suspend(chip);
+ pm_runtime_force_suspend(dev);
if (bus->irq >= 0) {
free_irq(bus->irq, chip);
bus->irq = -1;
chip->msi = 0;
if (azx_acquire_irq(chip, 1) < 0)
return -EIO;
- __azx_runtime_resume(chip, false);
+
+ pm_runtime_force_resume(dev);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
trace_azx_resume(chip);
struct azx *chip = card->private_data;
struct pci_dev *pci = to_pci_dev(dev);
+ if (!azx_is_pm_ready(card))
+ return 0;
if (chip->driver_type == AZX_DRIVER_SKL)
pci_set_power_state(pci, PCI_D3hot);
struct azx *chip = card->private_data;
struct pci_dev *pci = to_pci_dev(dev);
+ if (!azx_is_pm_ready(card))
+ return 0;
if (chip->driver_type == AZX_DRIVER_SKL)
pci_set_power_state(pci, PCI_D0);
if (!azx_is_pm_ready(card))
return 0;
chip = card->private_data;
- if (!azx_has_pm_runtime(chip))
- return 0;
/* enable controller wake up event */
- azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) |
- STATESTS_INT_MASK);
+ if (snd_power_get_state(card) == SNDRV_CTL_POWER_D0) {
+ azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) |
+ STATESTS_INT_MASK);
+ }
__azx_runtime_suspend(chip);
trace_azx_runtime_suspend(chip);
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
+ bool from_rt = snd_power_get_state(card) == SNDRV_CTL_POWER_D0;
if (!azx_is_pm_ready(card))
return 0;
chip = card->private_data;
- if (!azx_has_pm_runtime(chip))
- return 0;
- __azx_runtime_resume(chip, true);
+ __azx_runtime_resume(chip, from_rt);
/* disable controller Wake Up event*/
- azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) &
- ~STATESTS_INT_MASK);
+ if (from_rt) {
+ azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) &
+ ~STATESTS_INT_MASK);
+ }
trace_azx_runtime_resume(chip);
return 0;
if (!disabled) {
dev_info(chip->card->dev,
"Start delayed initialization\n");
- if (azx_probe_continue(chip) < 0) {
+ if (azx_probe_continue(chip) < 0)
dev_err(chip->card->dev, "initialization error\n");
- hda->init_failed = true;
- }
}
} else {
dev_info(chip->card->dev, "%s via vga_switcheroo\n",
/*
* destructor
*/
-static int azx_free(struct azx *chip)
+static void azx_free(struct azx *chip)
{
struct pci_dev *pci = chip->pci;
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
struct hdac_bus *bus = azx_bus(chip);
+ if (hda->freed)
+ return;
+
if (azx_has_pm_runtime(chip) && chip->running)
pm_runtime_get_noresume(&pci->dev);
chip->running = 0;
if (chip->driver_caps & AZX_DCAPS_I915_COMPONENT)
snd_hdac_i915_exit(bus);
- kfree(hda);
- return 0;
+ hda->freed = 1;
}
static int azx_dev_disconnect(struct snd_device *device)
static int azx_dev_free(struct snd_device *device)
{
- return azx_free(device->device_data);
+ azx_free(device->device_data);
+ return 0;
}
#ifdef SUPPORT_VGA_SWITCHEROO
if (err < 0)
return err;
- hda = kzalloc(sizeof(*hda), GFP_KERNEL);
+ hda = devm_kzalloc(&pci->dev, sizeof(*hda), GFP_KERNEL);
if (!hda) {
pci_disable_device(pci);
return -ENOMEM;
err = azx_bus_init(chip, model[dev]);
if (err < 0) {
- kfree(hda);
pci_disable_device(pci);
return err;
}
/* codec detection */
if (!azx_bus(chip)->codec_mask) {
dev_err(card->dev, "no codecs found!\n");
- return -ENODEV;
+ /* keep running the rest for the runtime PM */
}
if (azx_acquire_irq(chip, 0) < 0)
{
struct snd_card *card = context;
struct azx *chip = card->private_data;
- struct pci_dev *pci = chip->pci;
-
- if (!fw) {
- dev_err(card->dev, "Cannot load firmware, aborting\n");
- goto error;
- }
- chip->fw = fw;
+ if (fw)
+ chip->fw = fw;
+ else
+ dev_err(card->dev, "Cannot load firmware, continue without patching\n");
if (!chip->disabled) {
/* continue probing */
- if (azx_probe_continue(chip))
- goto error;
+ azx_probe_continue(chip);
}
- return; /* OK */
-
- error:
- snd_card_free(card);
- pci_set_drvdata(pci, NULL);
}
#endif
* should be ignored from the beginning.
*/
static const struct snd_pci_quirk driver_blacklist[] = {
- SND_PCI_QUIRK(0x1043, 0x874f, "ASUS ROG Zenith II / Strix", 0),
SND_PCI_QUIRK(0x1462, 0xcb59, "MSI TRX40 Creator", 0),
SND_PCI_QUIRK(0x1462, 0xcb60, "MSI TRX40", 0),
{}
#endif
/* create codec instances */
- err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
- if (err < 0)
- goto out_free;
+ if (bus->codec_mask) {
+ err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
+ if (err < 0)
+ goto out_free;
+ }
#ifdef CONFIG_SND_HDA_PATCH_LOADER
if (chip->fw) {
#endif
}
#endif
- if ((probe_only[dev] & 1) == 0) {
+ if (bus->codec_mask && !(probe_only[dev] & 1)) {
err = azx_codec_configure(chip);
if (err < 0)
goto out_free;
set_default_power_save(chip);
- if (azx_has_pm_runtime(chip))
+ if (azx_has_pm_runtime(chip)) {
+ pm_runtime_use_autosuspend(&pci->dev);
+ pm_runtime_allow(&pci->dev);
pm_runtime_put_autosuspend(&pci->dev);
+ }
out_free:
- if (err < 0 || !hda->need_i915_power)
+ if (err < 0) {
+ azx_free(chip);
+ return err;
+ }
+
+ if (!hda->need_i915_power)
display_power(chip, false);
- if (err < 0)
- hda->init_failed = 1;
complete_all(&hda->probe_wait);
to_hda_bus(bus)->bus_probing = 0;
- return err;
+ return 0;
}
static void azx_remove(struct pci_dev *pci)
unsigned int use_vga_switcheroo:1;
unsigned int vga_switcheroo_registered:1;
unsigned int init_failed:1; /* delayed init failed */
+ unsigned int freed:1; /* resources already released */
bool need_i915_power:1; /* the hda controller needs i915 power */
};
module_param(static_hdmi_pcm, bool, 0644);
MODULE_PARM_DESC(static_hdmi_pcm, "Don't restrict PCM parameters per ELD info");
+static bool enable_acomp = true;
+module_param(enable_acomp, bool, 0444);
+MODULE_PARM_DESC(enable_acomp, "Enable audio component binding (default=yes)");
+
struct hdmi_spec_per_cvt {
hda_nid_t cvt_nid;
int assigned;
{
struct hdmi_spec *spec = codec->spec;
+ if (!enable_acomp) {
+ codec_info(codec, "audio component disabled by module option\n");
+ return;
+ }
+
spec->port2pin = port2pin;
setup_drm_audio_ops(codec, ops);
if (!snd_hdac_acomp_init(&codec->bus->core, &spec->drm_audio_ops,
case 0x10ec0233:
case 0x10ec0235:
case 0x10ec0236:
+ case 0x10ec0245:
case 0x10ec0255:
case 0x10ec0256:
case 0x10ec0257:
{
if (!alc_subsystem_id(codec, ports)) {
struct alc_spec *spec = codec->spec;
- codec_dbg(codec,
- "realtek: Enable default setup for auto mode as fallback\n");
- spec->init_amp = ALC_INIT_DEFAULT;
+ if (spec->init_amp == ALC_INIT_UNDEFINED) {
+ codec_dbg(codec,
+ "realtek: Enable default setup for auto mode as fallback\n");
+ spec->init_amp = ALC_INIT_DEFAULT;
+ }
}
}
SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK),
SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),
+ SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC),
SND_PCI_QUIRK(0x1043, 0x19ce, "ASUS B9450FA", ALC294_FIXUP_ASUS_HPE),
SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC),
spec->gen.mixer_nid = 0;
break;
case 0x10ec0215:
+ case 0x10ec0245:
case 0x10ec0285:
case 0x10ec0289:
spec->codec_variant = ALC269_TYPE_ALC215;
HDA_CODEC_ENTRY(0x10ec0234, "ALC234", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0235, "ALC233", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0236, "ALC236", patch_alc269),
+ HDA_CODEC_ENTRY(0x10ec0245, "ALC245", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0255, "ALC255", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0256, "ALC256", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0257, "ALC257", patch_alc269),
}
snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
- snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOLUMEUP);
- snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
- snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOICECOMMAND);
+ snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+ snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+ snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
ret = snd_soc_component_set_jack(component, &pco_jack, NULL);
if (ret) {
config SND_SOC_WM8900
tristate
+ depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8903
tristate "Wolfson Microelectronics WM8903 CODEC"
config SND_SOC_WM8988
tristate
+ depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8990
tristate
config SND_SOC_WM8995
tristate
+ depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8996
tristate
hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi,
struct hdac_hdmi_cvt *cvt)
{
- struct hdac_hdmi_pcm *pcm = NULL;
+ struct hdac_hdmi_pcm *pcm;
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
if (pcm->cvt == cvt)
- break;
+ return pcm;
}
- return pcm;
+ return NULL;
}
static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm,
MADERA_ISRC4_FSH_SHIFT, 0xf,
MADERA_RATE_ENUM_SIZE,
madera_rate_text, madera_rate_val),
-
};
EXPORT_SYMBOL_GPL(madera_isrc_fsh);
MADERA_ISRC4_FSL_SHIFT, 0xf,
MADERA_RATE_ENUM_SIZE,
madera_rate_text, madera_rate_val),
-
};
EXPORT_SYMBOL_GPL(madera_isrc_fsl);
MADERA_ASYNC_RATE_ENUM_SIZE,
madera_rate_text + MADERA_SYNC_RATE_ENUM_SIZE,
madera_rate_val + MADERA_SYNC_RATE_ENUM_SIZE),
-
};
EXPORT_SYMBOL_GPL(madera_asrc1_rate);
MADERA_ASYNC_RATE_ENUM_SIZE,
madera_rate_text + MADERA_SYNC_RATE_ENUM_SIZE,
madera_rate_val + MADERA_SYNC_RATE_ENUM_SIZE),
-
};
EXPORT_SYMBOL_GPL(madera_asrc2_rate);
dev_err(&client->dev,
"Error %d initializing CHIP_CLK_CTRL\n", ret);
+ /* Mute everything to avoid pop from the following power-up */
+ ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL,
+ SGTL5000_CHIP_ANA_CTRL_DEFAULT);
+ if (ret) {
+ dev_err(&client->dev,
+ "Error %d muting outputs via CHIP_ANA_CTRL\n", ret);
+ goto disable_clk;
+ }
+
+ /*
+ * If VAG is powered-on (e.g. from previous boot), it would be disabled
+ * by the write to ANA_POWER in later steps of the probe code. This
+ * may create a loud pop even with all outputs muted. The proper way
+ * to circumvent this is disabling the bit first and waiting the proper
+ * cool-down time.
+ */
+ ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value);
+ if (ret) {
+ dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret);
+ goto disable_clk;
+ }
+ if (value & SGTL5000_VAG_POWERUP) {
+ ret = regmap_update_bits(sgtl5000->regmap,
+ SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP,
+ 0);
+ if (ret) {
+ dev_err(&client->dev, "Error %d disabling VAG\n", ret);
+ goto disable_clk;
+ }
+
+ msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+ }
+
/* Follow section 2.2.1.1 of AN3663 */
ana_pwr = SGTL5000_ANA_POWER_DEFAULT;
if (sgtl5000->num_supplies <= VDDD) {
/*
* SGTL5000_CHIP_ANA_CTRL
*/
+#define SGTL5000_CHIP_ANA_CTRL_DEFAULT 0x0133
#define SGTL5000_LINE_OUT_MUTE 0x0100
#define SGTL5000_HP_SEL_MASK 0x0040
#define SGTL5000_HP_SEL_SHIFT 6
priv->regmap = devm_regmap_init(dev, NULL, client,
priv->chip->regmap_config);
- if (IS_ERR(priv->regmap))
- return PTR_ERR(priv->regmap);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ goto disable_regs;
+ }
priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW);
if (IS_ERR(priv->pdn_gpio)) {
ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0);
if (ret)
- return ret;
+ goto disable_regs;
usleep_range(50000, 60000);
*/
ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0);
if (ret)
- return ret;
+ goto disable_regs;
}
- return devm_snd_soc_register_component(&client->dev,
+ ret = devm_snd_soc_register_component(&client->dev,
&priv->component_driver,
&tas571x_dai, 1);
+ if (ret)
+ goto disable_regs;
+
+ return ret;
+
+disable_regs:
+ regulator_bulk_disable(priv->chip->num_supply_names, priv->supplies);
+ return ret;
}
static int tas571x_i2c_remove(struct i2c_client *client)
wm8960->is_stream_in_use[tx] = true;
- if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_ON &&
- !wm8960->is_stream_in_use[!tx])
+ if (!wm8960->is_stream_in_use[!tx])
return wm8960_configure_clocking(component);
return 0;
.min_ch = 1,
.max_ch = 1,
.simple_ch_prep_sm = true,
+ .read_only_wordlength = true,
}, {
/* COMP */
.num = 2,
.min_ch = 1,
.max_ch = 1,
.simple_ch_prep_sm = true,
+ .read_only_wordlength = true,
}, {
/* BOOST */
.num = 3,
.min_ch = 1,
.max_ch = 1,
.simple_ch_prep_sm = true,
+ .read_only_wordlength = true,
}, {
/* VISENSE */
.num = 4,
.min_ch = 1,
.max_ch = 1,
.simple_ch_prep_sm = true,
+ .read_only_wordlength = true,
}
};
}
};
-static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
- {
- .adr = 0x000210025D130800,
- .num_endpoints = 1,
- .endpoints = &single_endpoint,
- }
-};
-
static const struct snd_soc_acpi_adr_device rt1308_1_group1_adr[] = {
{
.adr = 0x000110025D130800,
}
};
-static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
- {
- .adr = 0x000210025D130800,
- .num_endpoints = 1,
- .endpoints = &single_endpoint,
- }
-};
-
static const struct snd_soc_acpi_adr_device rt1308_1_group1_adr[] = {
{
.adr = 0x000110025D130800,
if (axg_card_cpu_is_tdm_iface(dai_link->cpus->of_node))
ret = axg_card_parse_tdm(card, np, index);
- else if (axg_card_cpu_is_codec(dai_link->cpus->of_node))
+ else if (axg_card_cpu_is_codec(dai_link->cpus->of_node)) {
dai_link->params = &codec_params;
+ dai_link->no_pcm = 0; /* link is not a DPCM BE */
+ }
return ret;
}
ret = gx_card_parse_i2s(card, np, index);
/* Or apply codec to codec params if necessary */
- else if (gx_card_cpu_identify(dai_link->cpus, "CODEC CTRL"))
+ else if (gx_card_cpu_identify(dai_link->cpus, "CODEC CTRL")) {
dai_link->params = &codec_params;
+ dai_link->no_pcm = 0; /* link is not a DPCM BE */
+ }
return ret;
}
card->dev = dev;
dev_set_drvdata(dev, card);
ret = qcom_snd_parse_of(card);
- if (ret) {
- dev_err(dev, "Error parsing OF data\n");
+ if (ret)
goto err;
- }
apq8096_add_be_ops(card);
ret = snd_soc_register_card(card);
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
card->dev = dev;
dev_set_drvdata(dev, card);
ret = qcom_snd_parse_of(card);
- if (ret) {
- dev_err(dev, "Error parsing OF data\n");
+ if (ret)
goto parse_dt_fail;
- }
data->card = card;
snd_soc_card_set_drvdata(card, data);
}
EXPORT_SYMBOL_GPL(s3c_i2sv2_cleanup);
-#ifdef CONFIG_PM
-static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
-{
- struct s3c_i2sv2_info *i2s = to_info(dai);
- u32 iismod;
-
- if (dai->active) {
- i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
- i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
- i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
-
- /* some basic suspend checks */
-
- iismod = readl(i2s->regs + S3C2412_IISMOD);
-
- if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
- pr_warn("%s: RXDMA active?\n", __func__);
-
- if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
- pr_warn("%s: TXDMA active?\n", __func__);
-
- if (iismod & S3C2412_IISCON_IIS_ACTIVE)
- pr_warn("%s: IIS active\n", __func__);
- }
-
- return 0;
-}
-
-static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
-{
- struct s3c_i2sv2_info *i2s = to_info(dai);
-
- pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
- dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
-
- if (dai->active) {
- writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
- writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
- writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
-
- writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
- i2s->regs + S3C2412_IISFIC);
-
- ndelay(250);
- writel(0x0, i2s->regs + S3C2412_IISFIC);
- }
-
- return 0;
-}
-#else
-#define s3c2412_i2s_suspend NULL
-#define s3c2412_i2s_resume NULL
-#endif
-
int s3c_i2sv2_register_component(struct device *dev, int id,
const struct snd_soc_component_driver *cmp_drv,
struct snd_soc_dai_driver *dai_drv)
if (!ops->delay)
ops->delay = s3c2412_i2s_delay;
- dai_drv->suspend = s3c2412_i2s_suspend;
- dai_drv->resume = s3c2412_i2s_resume;
-
return devm_snd_soc_register_component(dev, cmp_drv, dai_drv, 1);
}
EXPORT_SYMBOL_GPL(s3c_i2sv2_register_component);
return 0;
}
+#ifdef CONFIG_PM
+static int s3c2412_i2s_suspend(struct snd_soc_component *component)
+{
+ struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+ u32 iismod;
+
+ if (component->active) {
+ i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
+ i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
+ i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
+
+ /* some basic suspend checks */
+
+ iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+ if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
+ pr_warn("%s: RXDMA active?\n", __func__);
+
+ if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
+ pr_warn("%s: TXDMA active?\n", __func__);
+
+ if (iismod & S3C2412_IISCON_IIS_ACTIVE)
+ pr_warn("%s: IIS active\n", __func__);
+ }
+
+ return 0;
+}
+
+static int s3c2412_i2s_resume(struct snd_soc_component *component)
+{
+ struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+
+ pr_info("component_active %d, IISMOD %08x, IISCON %08x\n",
+ component->active, i2s->suspend_iismod, i2s->suspend_iiscon);
+
+ if (component->active) {
+ writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
+ writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
+ writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
+
+ writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
+ i2s->regs + S3C2412_IISFIC);
+
+ ndelay(250);
+ writel(0x0, i2s->regs + S3C2412_IISFIC);
+ }
+
+ return 0;
+}
+#else
+#define s3c2412_i2s_suspend NULL
+#define s3c2412_i2s_resume NULL
+#endif
+
#define S3C2412_I2S_RATES \
(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
static const struct snd_soc_component_driver s3c2412_i2s_component = {
.name = "s3c2412-i2s",
+ .suspend = s3c2412_i2s_suspend,
+ .resume = s3c2412_i2s_resume,
};
static int s3c2412_iis_dev_probe(struct platform_device *pdev)
* Capture: It might not receave data. Do nothing
*/
if (rsnd_io_is_play(io)) {
- rsnd_mod_write(mod, SSICR, cr | EN);
+ rsnd_mod_write(mod, SSICR, cr | ssi->cr_en);
rsnd_ssi_status_check(mod, DIRQ);
}
+ /* In multi-SSI mode, stop is performed by setting ssi0129 in
+ * SSI_CONTROL to 0 (in rsnd_ssio_stop_gen2). Do nothing here.
+ */
+ if (rsnd_ssi_multi_slaves_runtime(io))
+ return 0;
+
/*
* disable SSI,
* and, wait idle state
if (!rsnd_rdai_is_clk_master(rdai))
return;
+ if (rsnd_ssi_is_multi_slave(mod, io))
+ return;
+
switch (rsnd_mod_id(mod)) {
case 1:
case 2:
i;
for_each_rsnd_mod_array(i, pos, io, rsnd_ssi_array) {
- shift = (i * 4) + 16;
+ shift = (i * 4) + 20;
val = (val & ~(0xF << shift)) |
rsnd_mod_id(pos) << shift;
}
{
int ret = 0;
- if (!dai->started[substream->stream] &&
- dai->driver->ops->startup)
+ if (dai->driver->ops->startup)
ret = dai->driver->ops->startup(substream, dai);
- if (ret == 0)
- dai->started[substream->stream] = 1;
-
return ret;
}
void snd_soc_dai_shutdown(struct snd_soc_dai *dai,
struct snd_pcm_substream *substream)
{
- if (dai->started[substream->stream] &&
- dai->driver->ops->shutdown)
+ if (dai->driver->ops->shutdown)
dai->driver->ops->shutdown(substream, dai);
-
- dai->started[substream->stream] = 0;
}
int snd_soc_dai_prepare(struct snd_soc_dai *dai,
memset(&template, 0, sizeof(template));
template.reg = e->reg;
- template.mask = e->mask << e->shift_l;
+ template.mask = e->mask;
template.shift = e->shift_l;
template.off_val = snd_soc_enum_item_to_val(e, 0);
template.on_val = template.off_val;
if (data->value == value)
return false;
- if (data->widget)
- data->widget->on_val = value;
+ if (data->widget) {
+ switch (dapm_kcontrol_get_wlist(kcontrol)->widgets[0]->id) {
+ case snd_soc_dapm_switch:
+ case snd_soc_dapm_mixer:
+ case snd_soc_dapm_mixer_named_ctl:
+ data->widget->on_val = value & data->widget->mask;
+ break;
+ case snd_soc_dapm_demux:
+ case snd_soc_dapm_mux:
+ data->widget->on_val = value >> data->widget->shift;
+ break;
+ default:
+ data->widget->on_val = value;
+ break;
+ }
+ }
data->value = value;
w = snd_soc_dapm_new_control_unlocked(&card->dapm, &template);
if (IS_ERR(w)) {
ret = PTR_ERR(w);
+ dev_err(rtd->dev, "ASoC: Failed to create %s widget: %d\n",
+ link_name, ret);
goto outfree_kcontrol_news;
}
return 0;
}
-static void dapm_add_valid_dai_widget(struct snd_soc_card *card,
- struct snd_soc_pcm_runtime *rtd,
- struct snd_soc_dai *codec_dai,
- struct snd_soc_dai *cpu_dai)
+static void dapm_connect_dai_routes(struct snd_soc_dapm_context *dapm,
+ struct snd_soc_dai *src_dai,
+ struct snd_soc_dapm_widget *src,
+ struct snd_soc_dapm_widget *dai,
+ struct snd_soc_dai *sink_dai,
+ struct snd_soc_dapm_widget *sink)
{
- struct snd_soc_dapm_widget *playback = NULL, *capture = NULL;
- struct snd_soc_dapm_widget *codec, *playback_cpu, *capture_cpu;
+ dev_dbg(dapm->dev, "connected DAI link %s:%s -> %s:%s\n",
+ src_dai->component->name, src->name,
+ sink_dai->component->name, sink->name);
+
+ if (dai) {
+ snd_soc_dapm_add_path(dapm, src, dai, NULL, NULL);
+ src = dai;
+ }
+
+ snd_soc_dapm_add_path(dapm, src, sink, NULL, NULL);
+}
+
+static void dapm_connect_dai_pair(struct snd_soc_card *card,
+ struct snd_soc_pcm_runtime *rtd,
+ struct snd_soc_dai *codec_dai,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct snd_soc_dai_link *dai_link = rtd->dai_link;
+ struct snd_soc_dapm_widget *dai, *codec, *playback_cpu, *capture_cpu;
struct snd_pcm_substream *substream;
struct snd_pcm_str *streams = rtd->pcm->streams;
- if (rtd->dai_link->params) {
+ if (dai_link->params) {
playback_cpu = cpu_dai->capture_widget;
capture_cpu = cpu_dai->playback_widget;
} else {
- playback = cpu_dai->playback_widget;
- capture = cpu_dai->capture_widget;
- playback_cpu = playback;
- capture_cpu = capture;
+ playback_cpu = cpu_dai->playback_widget;
+ capture_cpu = cpu_dai->capture_widget;
}
/* connect BE DAI playback if widgets are valid */
codec = codec_dai->playback_widget;
if (playback_cpu && codec) {
- if (!playback) {
+ if (dai_link->params && !dai_link->playback_widget) {
substream = streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
- playback = snd_soc_dapm_new_dai(card, substream,
- "playback");
- if (IS_ERR(playback)) {
- dev_err(rtd->dev,
- "ASoC: Failed to create DAI %s: %ld\n",
- codec_dai->name,
- PTR_ERR(playback));
+ dai = snd_soc_dapm_new_dai(card, substream, "playback");
+ if (IS_ERR(dai))
goto capture;
- }
-
- snd_soc_dapm_add_path(&card->dapm, playback_cpu,
- playback, NULL, NULL);
+ dai_link->playback_widget = dai;
}
- dev_dbg(rtd->dev, "connected DAI link %s:%s -> %s:%s\n",
- cpu_dai->component->name, playback_cpu->name,
- codec_dai->component->name, codec->name);
-
- snd_soc_dapm_add_path(&card->dapm, playback, codec,
- NULL, NULL);
+ dapm_connect_dai_routes(&card->dapm, cpu_dai, playback_cpu,
+ dai_link->playback_widget,
+ codec_dai, codec);
}
capture:
codec = codec_dai->capture_widget;
if (codec && capture_cpu) {
- if (!capture) {
+ if (dai_link->params && !dai_link->capture_widget) {
substream = streams[SNDRV_PCM_STREAM_CAPTURE].substream;
- capture = snd_soc_dapm_new_dai(card, substream,
- "capture");
- if (IS_ERR(capture)) {
- dev_err(rtd->dev,
- "ASoC: Failed to create DAI %s: %ld\n",
- codec_dai->name,
- PTR_ERR(capture));
+ dai = snd_soc_dapm_new_dai(card, substream, "capture");
+ if (IS_ERR(dai))
return;
- }
-
- snd_soc_dapm_add_path(&card->dapm, capture,
- capture_cpu, NULL, NULL);
+ dai_link->capture_widget = dai;
}
- dev_dbg(rtd->dev, "connected DAI link %s:%s -> %s:%s\n",
- codec_dai->component->name, codec->name,
- cpu_dai->component->name, capture_cpu->name);
-
- snd_soc_dapm_add_path(&card->dapm, codec, capture,
- NULL, NULL);
- }
-}
-
-static void dapm_connect_dai_link_widgets(struct snd_soc_card *card,
- struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_dai *codec_dai;
- int i;
-
- if (rtd->num_cpus == 1) {
- for_each_rtd_codec_dais(rtd, i, codec_dai)
- dapm_add_valid_dai_widget(card, rtd, codec_dai,
- rtd->cpu_dais[0]);
- } else if (rtd->num_codecs == rtd->num_cpus) {
- for_each_rtd_codec_dais(rtd, i, codec_dai)
- dapm_add_valid_dai_widget(card, rtd, codec_dai,
- rtd->cpu_dais[i]);
- } else {
- dev_err(card->dev,
- "N cpus to M codecs link is not supported yet\n");
+ dapm_connect_dai_routes(&card->dapm, codec_dai, codec,
+ dai_link->capture_widget,
+ cpu_dai, capture_cpu);
}
-
}
static void soc_dapm_dai_stream_event(struct snd_soc_dai *dai, int stream,
void snd_soc_dapm_connect_dai_link_widgets(struct snd_soc_card *card)
{
struct snd_soc_pcm_runtime *rtd;
+ struct snd_soc_dai *codec_dai;
+ int i;
/* for each BE DAI link... */
for_each_card_rtds(card, rtd) {
if (rtd->dai_link->dynamic)
continue;
- dapm_connect_dai_link_widgets(card, rtd);
+ if (rtd->num_cpus == 1) {
+ for_each_rtd_codec_dais(rtd, i, codec_dai)
+ dapm_connect_dai_pair(card, rtd, codec_dai,
+ rtd->cpu_dais[0]);
+ } else if (rtd->num_codecs == rtd->num_cpus) {
+ for_each_rtd_codec_dais(rtd, i, codec_dai)
+ dapm_connect_dai_pair(card, rtd, codec_dai,
+ rtd->cpu_dais[i]);
+ } else {
+ dev_err(card->dev,
+ "N cpus to M codecs link is not supported yet\n");
+ }
}
}
int i;
if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
- playback = rtd->dai_link->dpcm_playback;
- capture = rtd->dai_link->dpcm_capture;
+ cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ if (rtd->num_cpus > 1) {
+ dev_err(rtd->dev,
+ "DPCM doesn't support Multi CPU yet\n");
+ return -EINVAL;
+ }
+
+ playback = rtd->dai_link->dpcm_playback &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK);
+ capture = rtd->dai_link->dpcm_capture &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE);
} else {
/* Adapt stream for codec2codec links */
int cpu_capture = rtd->dai_link->params ?
}
/* create any TLV data */
- soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+ err = soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+ if (err < 0) {
+ dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+ mc->hdr.name);
+ kfree(sm);
+ continue;
+ }
/* pass control to driver for optional further init */
err = soc_tplg_init_kcontrol(tplg, &kc,
struct snd_soc_tplg_hdr *hdr)
{
struct snd_soc_tplg_ctl_hdr *control_hdr;
+ int ret;
int i;
if (tplg->pass != SOC_TPLG_PASS_MIXER) {
case SND_SOC_TPLG_CTL_RANGE:
case SND_SOC_TPLG_DAPM_CTL_VOLSW:
case SND_SOC_TPLG_DAPM_CTL_PIN:
- soc_tplg_dmixer_create(tplg, 1,
- le32_to_cpu(hdr->payload_size));
+ ret = soc_tplg_dmixer_create(tplg, 1,
+ le32_to_cpu(hdr->payload_size));
break;
case SND_SOC_TPLG_CTL_ENUM:
case SND_SOC_TPLG_CTL_ENUM_VALUE:
case SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE:
case SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT:
case SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE:
- soc_tplg_denum_create(tplg, 1,
- le32_to_cpu(hdr->payload_size));
+ ret = soc_tplg_denum_create(tplg, 1,
+ le32_to_cpu(hdr->payload_size));
break;
case SND_SOC_TPLG_CTL_BYTES:
- soc_tplg_dbytes_create(tplg, 1,
- le32_to_cpu(hdr->payload_size));
+ ret = soc_tplg_dbytes_create(tplg, 1,
+ le32_to_cpu(hdr->payload_size));
break;
default:
soc_bind_err(tplg, control_hdr, i);
return -EINVAL;
}
+ if (ret < 0) {
+ dev_err(tplg->dev, "ASoC: invalid control\n");
+ return ret;
+ }
+
}
return 0;
routes[i]->dobj.index = tplg->index;
list_add(&routes[i]->dobj.list, &tplg->comp->dobj_list);
- soc_tplg_add_route(tplg, routes[i]);
+ ret = soc_tplg_add_route(tplg, routes[i]);
+ if (ret < 0)
+ break;
/* add route, but keep going if some fail */
snd_soc_dapm_add_routes(dapm, routes[i], 1);
}
/* create any TLV data */
- soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+ err = soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+ if (err < 0) {
+ dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+ mc->hdr.name);
+ kfree(sm);
+ continue;
+ }
/* pass control to driver for optional further init */
err = soc_tplg_init_kcontrol(tplg, &kc[i],
return 0;
}
-static void set_stream_info(struct snd_soc_pcm_stream *stream,
+static int set_stream_info(struct snd_soc_pcm_stream *stream,
struct snd_soc_tplg_stream_caps *caps)
{
stream->stream_name = kstrdup(caps->name, GFP_KERNEL);
+ if (!stream->stream_name)
+ return -ENOMEM;
+
stream->channels_min = le32_to_cpu(caps->channels_min);
stream->channels_max = le32_to_cpu(caps->channels_max);
stream->rates = le32_to_cpu(caps->rates);
stream->rate_max = le32_to_cpu(caps->rate_max);
stream->formats = le64_to_cpu(caps->formats);
stream->sig_bits = le32_to_cpu(caps->sig_bits);
+
+ return 0;
}
static void set_dai_flags(struct snd_soc_dai_driver *dai_drv,
if (dai_drv == NULL)
return -ENOMEM;
- if (strlen(pcm->dai_name))
+ if (strlen(pcm->dai_name)) {
dai_drv->name = kstrdup(pcm->dai_name, GFP_KERNEL);
+ if (!dai_drv->name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ }
dai_drv->id = le32_to_cpu(pcm->dai_id);
if (pcm->playback) {
stream = &dai_drv->playback;
caps = &pcm->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
- set_stream_info(stream, caps);
+ ret = set_stream_info(stream, caps);
+ if (ret < 0)
+ goto err;
}
if (pcm->capture) {
stream = &dai_drv->capture;
caps = &pcm->caps[SND_SOC_TPLG_STREAM_CAPTURE];
- set_stream_info(stream, caps);
+ ret = set_stream_info(stream, caps);
+ if (ret < 0)
+ goto err;
}
if (pcm->compress)
ret = soc_tplg_dai_load(tplg, dai_drv, pcm, NULL);
if (ret < 0) {
dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
- kfree(dai_drv->playback.stream_name);
- kfree(dai_drv->capture.stream_name);
- kfree(dai_drv->name);
- kfree(dai_drv);
- return ret;
+ goto err;
}
dai_drv->dobj.index = tplg->index;
return ret;
}
+ return 0;
+
+err:
+ kfree(dai_drv->playback.stream_name);
+ kfree(dai_drv->capture.stream_name);
+ kfree(dai_drv->name);
+ kfree(dai_drv);
+
return ret;
}
if (strlen(pcm->pcm_name)) {
link->name = kstrdup(pcm->pcm_name, GFP_KERNEL);
link->stream_name = kstrdup(pcm->pcm_name, GFP_KERNEL);
+ if (!link->name || !link->stream_name) {
+ ret = -ENOMEM;
+ goto err;
+ }
}
link->id = le32_to_cpu(pcm->pcm_id);
- if (strlen(pcm->dai_name))
+ if (strlen(pcm->dai_name)) {
link->cpus->dai_name = kstrdup(pcm->dai_name, GFP_KERNEL);
+ if (!link->cpus->dai_name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ }
link->codecs->name = "snd-soc-dummy";
link->codecs->dai_name = "snd-soc-dummy-dai";
_pcm = pcm;
} else {
abi_match = false;
- pcm_new_ver(tplg, pcm, &_pcm);
+ ret = pcm_new_ver(tplg, pcm, &_pcm);
+ if (ret < 0)
+ return ret;
}
/* create the FE DAIs and DAI links */
if (d->playback) {
stream = &dai_drv->playback;
caps = &d->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
- set_stream_info(stream, caps);
+ ret = set_stream_info(stream, caps);
+ if (ret < 0)
+ goto err;
}
if (d->capture) {
stream = &dai_drv->capture;
caps = &d->caps[SND_SOC_TPLG_STREAM_CAPTURE];
- set_stream_info(stream, caps);
+ ret = set_stream_info(stream, caps);
+ if (ret < 0)
+ goto err;
}
if (d->flag_mask)
ret = soc_tplg_dai_load(tplg, dai_drv, NULL, dai);
if (ret < 0) {
dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
- return ret;
+ goto err;
}
return 0;
+
+err:
+ kfree(dai_drv->playback.stream_name);
+ kfree(dai_drv->capture.stream_name);
+ return ret;
}
/* load physical DAI elements */
{
struct snd_soc_tplg_dai *dai;
int count;
- int i;
+ int i, ret;
count = le32_to_cpu(hdr->count);
return -EINVAL;
}
- soc_tplg_dai_config(tplg, dai);
+ ret = soc_tplg_dai_config(tplg, dai);
+ if (ret < 0) {
+ dev_err(tplg->dev, "ASoC: failed to configure DAI\n");
+ return ret;
+ }
+
tplg->pos += (sizeof(*dai) + le32_to_cpu(dai->priv.size));
}
}
/* big endian firmware objects not supported atm */
- if (hdr->magic == SOC_TPLG_MAGIC_BIG_ENDIAN) {
+ if (le32_to_cpu(hdr->magic) == SOC_TPLG_MAGIC_BIG_ENDIAN) {
dev_err(tplg->dev,
"ASoC: pass %d big endian not supported header got %x at offset 0x%lx size 0x%zx.\n",
tplg->pass, hdr->magic,
static struct snd_soc_dai_driver bdw_dai[] = {
{
.name = "ssp0-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp1-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
};
static struct snd_soc_dai_driver byt_dai[] = {
{
.name = "ssp0-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp1-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp2-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ }
},
{
.name = "ssp3-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp4-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp5-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
};
cr1 = SAI_XCR1_DS_SET(SAI_DATASIZE_32);
break;
default:
- dev_err(cpu_dai->dev, "Data format not supported");
+ dev_err(cpu_dai->dev, "Data format not supported\n");
return -EINVAL;
}
return ret;
}
+ if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
+ conf = &stm32_sai_pcm_config_spdif;
+
ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
if (ret) {
if (ret != -EPROBE_DEFER)
ret = snd_soc_register_component(&pdev->dev, &stm32_component,
&sai->cpu_dai_drv, 1);
- if (ret) {
+ if (ret)
snd_dmaengine_pcm_unregister(&pdev->dev);
- return ret;
- }
-
- if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
- conf = &stm32_sai_pcm_config_spdif;
- return 0;
+ return ret;
}
static int stm32_sai_sub_remove(struct platform_device *pdev)
}
/*
+ * Many Focusrite devices supports a limited set of sampling rates per
+ * altsetting. Maximum rate is exposed in the last 4 bytes of Format Type
+ * descriptor which has a non-standard bLength = 10.
+ */
+static bool focusrite_valid_sample_rate(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ unsigned int rate)
+{
+ struct usb_interface *iface;
+ struct usb_host_interface *alts;
+ unsigned char *fmt;
+ unsigned int max_rate;
+
+ iface = usb_ifnum_to_if(chip->dev, fp->iface);
+ if (!iface)
+ return true;
+
+ alts = &iface->altsetting[fp->altset_idx];
+ fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen,
+ NULL, UAC_FORMAT_TYPE);
+ if (!fmt)
+ return true;
+
+ if (fmt[0] == 10) { /* bLength */
+ max_rate = combine_quad(&fmt[6]);
+
+ /* Validate max rate */
+ if (max_rate != 48000 &&
+ max_rate != 96000 &&
+ max_rate != 192000 &&
+ max_rate != 384000) {
+
+ usb_audio_info(chip,
+ "%u:%d : unexpected max rate: %u\n",
+ fp->iface, fp->altsetting, max_rate);
+
+ return true;
+ }
+
+ return rate <= max_rate;
+ }
+
+ return true;
+}
+
+/*
* Helper function to walk the array of sample rate triplets reported by
* the device. The problem is that we need to parse whole array first to
* get to know how many sample rates we have to expect.
!s1810c_valid_sample_rate(fp, rate))
goto skip_rate;
+ /* Filter out invalid rates on Focusrite devices */
+ if (USB_ID_VENDOR(chip->usb_id) == 0x1235 &&
+ !focusrite_valid_sample_rate(chip, fp, rate))
+ goto skip_rate;
+
if (fp->rate_table)
fp->rate_table[nr_rates] = rate;
if (!fp->rate_min || rate < fp->rate_min)
usb_audio_err(chip,
"cannot get connectors status: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
UAC_GET_CUR, validx, idx, cval->val_type);
- return ret;
+ return filter_error(cval, ret);
}
ucontrol->value.integer.value[0] = val;
/* Build a mixer control for a UAC connector control (jack-detect) */
static void build_connector_control(struct usb_mixer_interface *mixer,
+ const struct usbmix_name_map *imap,
struct usb_audio_term *term, bool is_input)
{
struct snd_kcontrol *kctl;
struct usb_mixer_elem_info *cval;
+ const struct usbmix_name_map *map;
+
+ map = find_map(imap, term->id, 0);
+ if (check_ignored_ctl(map))
+ return;
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
if (!cval)
usb_mixer_elem_info_free(cval);
return;
}
- get_connector_control_name(mixer, term, is_input, kctl->id.name,
- sizeof(kctl->id.name));
+
+ if (check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name)))
+ strlcat(kctl->id.name, " Jack", sizeof(kctl->id.name));
+ else
+ get_connector_control_name(mixer, term, is_input, kctl->id.name,
+ sizeof(kctl->id.name));
kctl->private_free = snd_usb_mixer_elem_free;
snd_usb_mixer_add_control(&cval->head, kctl);
}
check_input_term(state, term_id, &iterm);
/* Check for jack detection. */
- if (uac_v2v3_control_is_readable(bmctls, control))
- build_connector_control(state->mixer, &iterm, true);
+ if ((iterm.type & 0xff00) != 0x0100 &&
+ uac_v2v3_control_is_readable(bmctls, control))
+ build_connector_control(state->mixer, state->map, &iterm, true);
return 0;
}
memset(&iterm, 0, sizeof(iterm));
iterm.id = UAC3_BADD_IT_ID4;
iterm.type = UAC_BIDIR_TERMINAL_HEADSET;
- build_connector_control(mixer, &iterm, true);
+ build_connector_control(mixer, map->map, &iterm, true);
/* Output Term - Insertion control */
memset(&oterm, 0, sizeof(oterm));
oterm.id = UAC3_BADD_OT_ID3;
oterm.type = UAC_BIDIR_TERMINAL_HEADSET;
- build_connector_control(mixer, &oterm, false);
+ build_connector_control(mixer, map->map, &oterm, false);
}
return 0;
if (map->id == state.chip->usb_id) {
state.map = map->map;
state.selector_map = map->selector_map;
- mixer->ignore_ctl_error = map->ignore_ctl_error;
+ mixer->connector_map = map->connector_map;
+ mixer->ignore_ctl_error |= map->ignore_ctl_error;
break;
}
}
if (err < 0 && err != -EINVAL)
return err;
- if (uac_v2v3_control_is_readable(le16_to_cpu(desc->bmControls),
+ if ((state.oterm.type & 0xff00) != 0x0100 &&
+ uac_v2v3_control_is_readable(le16_to_cpu(desc->bmControls),
UAC2_TE_CONNECTOR)) {
- build_connector_control(state.mixer, &state.oterm,
- false);
+ build_connector_control(state.mixer, state.map,
+ &state.oterm, false);
}
} else { /* UAC_VERSION_3 */
struct uac3_output_terminal_descriptor *desc = p;
if (err < 0 && err != -EINVAL)
return err;
- if (uac_v2v3_control_is_readable(le32_to_cpu(desc->bmControls),
+ if ((state.oterm.type & 0xff00) != 0x0100 &&
+ uac_v2v3_control_is_readable(le32_to_cpu(desc->bmControls),
UAC3_TE_INSERTION)) {
- build_connector_control(state.mixer, &state.oterm,
- false);
+ build_connector_control(state.mixer, state.map,
+ &state.oterm, false);
}
}
}
return 0;
}
+static int delegate_notify(struct usb_mixer_interface *mixer, int unitid,
+ u8 *control, u8 *channel)
+{
+ const struct usbmix_connector_map *map = mixer->connector_map;
+
+ if (!map)
+ return unitid;
+
+ for (; map->id; map++) {
+ if (map->id == unitid) {
+ if (control && map->control)
+ *control = map->control;
+ if (channel && map->channel)
+ *channel = map->channel;
+ return map->delegated_id;
+ }
+ }
+ return unitid;
+}
+
void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid)
{
struct usb_mixer_elem_list *list;
+ unitid = delegate_notify(mixer, unitid, NULL, NULL);
+
for_each_mixer_elem(list, mixer, unitid) {
struct usb_mixer_elem_info *info =
mixer_elem_list_to_info(list);
return;
}
+ unitid = delegate_notify(mixer, unitid, &control, &channel);
+
for_each_mixer_elem(list, mixer, unitid)
count++;
struct media_mixer_ctl;
+struct usbmix_connector_map {
+ u8 id;
+ u8 delegated_id;
+ u8 control;
+ u8 channel;
+};
+
struct usb_mixer_interface {
struct snd_usb_audio *chip;
struct usb_host_interface *hostif;
/* the usb audio specification version this interface complies to */
int protocol;
+ /* optional connector delegation map */
+ const struct usbmix_connector_map *connector_map;
+
/* Sound Blaster remote control stuff */
const struct rc_config *rc_cfg;
u32 rc_code;
u32 id;
const struct usbmix_name_map *map;
const struct usbmix_selector_map *selector_map;
+ const struct usbmix_connector_map *connector_map;
int ignore_ctl_error;
};
};
/* Some mobos shipped with a dummy HD-audio show the invalid GET_MIN/GET_MAX
- * response for Input Gain Pad (id=19, control=12). Skip it.
+ * response for Input Gain Pad (id=19, control=12) and the connector status
+ * for SPDIF terminal (id=18). Skip them.
*/
static const struct usbmix_name_map asus_rog_map[] = {
+ { 18, NULL }, /* OT, connector control */
{ 19, NULL, 12 }, /* FU, Input Gain Pad */
{}
};
+/* TRX40 mobos with Realtek ALC1220-VB */
+static const struct usbmix_name_map trx40_mobo_map[] = {
+ { 18, NULL }, /* OT, IEC958 - broken response, disabled */
+ { 19, NULL, 12 }, /* FU, Input Gain Pad - broken response, disabled */
+ { 16, "Speaker" }, /* OT */
+ { 22, "Speaker Playback" }, /* FU */
+ { 7, "Line" }, /* IT */
+ { 19, "Line Capture" }, /* FU */
+ { 17, "Front Headphone" }, /* OT */
+ { 23, "Front Headphone Playback" }, /* FU */
+ { 8, "Mic" }, /* IT */
+ { 20, "Mic Capture" }, /* FU */
+ { 9, "Front Mic" }, /* IT */
+ { 21, "Front Mic Capture" }, /* FU */
+ { 24, "IEC958 Playback" }, /* FU */
+ {}
+};
+
+static const struct usbmix_connector_map trx40_mobo_connector_map[] = {
+ { 10, 16 }, /* (Back) Speaker */
+ { 11, 17 }, /* Front Headphone */
+ { 13, 7 }, /* Line */
+ { 14, 8 }, /* Mic */
+ { 15, 9 }, /* Front Mic */
+ {}
+};
+
/*
* Control map entries
*/
},
{ /* Gigabyte TRX40 Aorus Pro WiFi */
.id = USB_ID(0x0414, 0xa002),
- .map = asus_rog_map,
+ .map = trx40_mobo_map,
+ .connector_map = trx40_mobo_connector_map,
},
{ /* ASUS ROG Zenith II */
.id = USB_ID(0x0b05, 0x1916),
},
{ /* MSI TRX40 Creator */
.id = USB_ID(0x0db0, 0x0d64),
- .map = asus_rog_map,
+ .map = trx40_mobo_map,
+ .connector_map = trx40_mobo_connector_map,
},
{ /* MSI TRX40 */
.id = USB_ID(0x0db0, 0x543d),
- .map = asus_rog_map,
+ .map = trx40_mobo_map,
+ .connector_map = trx40_mobo_connector_map,
},
{ 0 } /* terminator */
};
/* use known values for that card: interface#1 altsetting#1 */
iface = usb_ifnum_to_if(chip->dev, 1);
- if (!iface || iface->num_altsetting < 2)
- return -EINVAL;
+ if (!iface || iface->num_altsetting < 2) {
+ err = -EINVAL;
+ goto end;
+ }
alts = &iface->altsetting[1];
- if (get_iface_desc(alts)->bNumEndpoints < 1)
- return -EINVAL;
+ if (get_iface_desc(alts)->bNumEndpoints < 1) {
+ err = -EINVAL;
+ goto end;
+ }
ep = get_endpoint(alts, 0)->bEndpointAddress;
err = snd_usb_ctl_msg(chip->dev,
.type = QUIRK_MIDI_NOVATION
}
},
-{
- /*
- * Focusrite Scarlett Solo 2nd generation
- * Reports that playback should use Synch: Synchronous
- * while still providing a feedback endpoint. Synchronous causes
- * snapping on some sample rates.
- * Force it to use Synch: Asynchronous.
- */
- USB_DEVICE(0x1235, 0x8205),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .ifnum = QUIRK_ANY_INTERFACE,
- .type = QUIRK_COMPOSITE,
- .data = (const struct snd_usb_audio_quirk[]) {
- {
- .ifnum = 1,
- .type = QUIRK_AUDIO_FIXED_ENDPOINT,
- .data = & (const struct audioformat) {
- .formats = SNDRV_PCM_FMTBIT_S32_LE,
- .channels = 2,
- .iface = 1,
- .altsetting = 1,
- .altset_idx = 1,
- .attributes = 0,
- .endpoint = 0x01,
- .ep_attr = USB_ENDPOINT_XFER_ISOC |
- USB_ENDPOINT_SYNC_ASYNC,
- .protocol = UAC_VERSION_2,
- .rates = SNDRV_PCM_RATE_44100 |
- SNDRV_PCM_RATE_48000 |
- SNDRV_PCM_RATE_88200 |
- SNDRV_PCM_RATE_96000 |
- SNDRV_PCM_RATE_176400 |
- SNDRV_PCM_RATE_192000,
- .rate_min = 44100,
- .rate_max = 192000,
- .nr_rates = 6,
- .rate_table = (unsigned int[]) {
- 44100, 48000, 88200,
- 96000, 176400, 192000
- },
- .clock = 41
- }
- },
- {
- .ifnum = 2,
- .type = QUIRK_AUDIO_FIXED_ENDPOINT,
- .data = & (const struct audioformat) {
- .formats = SNDRV_PCM_FMTBIT_S32_LE,
- .channels = 2,
- .iface = 2,
- .altsetting = 1,
- .altset_idx = 1,
- .attributes = 0,
- .endpoint = 0x82,
- .ep_attr = USB_ENDPOINT_XFER_ISOC |
- USB_ENDPOINT_SYNC_ASYNC |
- USB_ENDPOINT_USAGE_IMPLICIT_FB,
- .protocol = UAC_VERSION_2,
- .rates = SNDRV_PCM_RATE_44100 |
- SNDRV_PCM_RATE_48000 |
- SNDRV_PCM_RATE_88200 |
- SNDRV_PCM_RATE_96000 |
- SNDRV_PCM_RATE_176400 |
- SNDRV_PCM_RATE_192000,
- .rate_min = 44100,
- .rate_max = 192000,
- .nr_rates = 6,
- .rate_table = (unsigned int[]) {
- 44100, 48000, 88200,
- 96000, 176400, 192000
- },
- .clock = 41
- }
- },
- {
- .ifnum = 3,
- .type = QUIRK_IGNORE_INTERFACE
- },
- {
- .ifnum = -1
- }
- }
- }
-},
/* Access Music devices */
{
}
},
+#define ALC1220_VB_DESKTOP(vend, prod) { \
+ USB_DEVICE(vend, prod), \
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \
+ .vendor_name = "Realtek", \
+ .product_name = "ALC1220-VB-DT", \
+ .profile_name = "Realtek-ALC1220-VB-Desktop", \
+ .ifnum = QUIRK_NO_INTERFACE \
+ } \
+}
+ALC1220_VB_DESKTOP(0x0414, 0xa002), /* Gigabyte TRX40 Aorus Pro WiFi */
+ALC1220_VB_DESKTOP(0x0db0, 0x0d64), /* MSI TRX40 Creator */
+ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */
+#undef ALC1220_VB_DESKTOP
+
#undef USB_DEVICE_VENDOR_SPEC
*/
fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
break;
+ case USB_ID(0x1235, 0x8200): /* Focusrite Scarlett 2i4 2nd gen */
+ case USB_ID(0x1235, 0x8202): /* Focusrite Scarlett 2i2 2nd gen */
+ case USB_ID(0x1235, 0x8205): /* Focusrite Scarlett Solo 2nd gen */
+ /*
+ * Reports that playback should use Synch: Synchronous
+ * while still providing a feedback endpoint.
+ * Synchronous causes snapping on some sample rates.
+ * Force it to use Synch: Asynchronous.
+ */
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
+ fp->ep_attr |= USB_ENDPOINT_SYNC_ASYNC;
+ }
+ break;
}
}
us->submitted = 2*NOOF_SETRATE_URBS;
for (i = 0; i < NOOF_SETRATE_URBS; ++i) {
struct urb *urb = us->urb[i];
+ if (!urb)
+ continue;
if (urb->status) {
if (!err)
err = -ENODEV;
#define X86_FEATURE_IBRS ( 7*32+25) /* Indirect Branch Restricted Speculation */
#define X86_FEATURE_IBPB ( 7*32+26) /* Indirect Branch Prediction Barrier */
#define X86_FEATURE_STIBP ( 7*32+27) /* Single Thread Indirect Branch Predictors */
-#define X86_FEATURE_ZEN ( 7*32+28) /* "" CPU is AMD family 0x17 (Zen) */
+#define X86_FEATURE_ZEN ( 7*32+28) /* "" CPU is AMD family 0x17 or above (Zen) */
#define X86_FEATURE_L1TF_PTEINV ( 7*32+29) /* "" L1TF workaround PTE inversion */
#define X86_FEATURE_IBRS_ENHANCED ( 7*32+30) /* Enhanced IBRS */
#define X86_FEATURE_MSR_IA32_FEAT_CTL ( 7*32+31) /* "" MSR IA32_FEAT_CTL configured */
#define X86_FEATURE_CQM_MBM_LOCAL (11*32+ 3) /* LLC Local MBM monitoring */
#define X86_FEATURE_FENCE_SWAPGS_USER (11*32+ 4) /* "" LFENCE in user entry SWAPGS path */
#define X86_FEATURE_FENCE_SWAPGS_KERNEL (11*32+ 5) /* "" LFENCE in kernel entry SWAPGS path */
+#define X86_FEATURE_SPLIT_LOCK_DETECT (11*32+ 6) /* #AC for split lock */
/* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
#define X86_FEATURE_AVX512_BF16 (12*32+ 5) /* AVX512 BFLOAT16 instructions */
#define X86_FEATURE_AMD_IBRS (13*32+14) /* "" Indirect Branch Restricted Speculation */
#define X86_FEATURE_AMD_STIBP (13*32+15) /* "" Single Thread Indirect Branch Predictors */
#define X86_FEATURE_AMD_STIBP_ALWAYS_ON (13*32+17) /* "" Single Thread Indirect Branch Predictors always-on preferred */
+#define X86_FEATURE_AMD_PPIN (13*32+23) /* Protected Processor Inventory Number */
#define X86_FEATURE_AMD_SSBD (13*32+24) /* "" Speculative Store Bypass Disable */
#define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */
#define X86_FEATURE_AMD_SSB_NO (13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */
#define X86_FEATURE_INTEL_STIBP (18*32+27) /* "" Single Thread Indirect Branch Predictors */
#define X86_FEATURE_FLUSH_L1D (18*32+28) /* Flush L1D cache */
#define X86_FEATURE_ARCH_CAPABILITIES (18*32+29) /* IA32_ARCH_CAPABILITIES MSR (Intel) */
+#define X86_FEATURE_CORE_CAPABILITIES (18*32+30) /* "" IA32_CORE_CAPABILITIES MSR */
#define X86_FEATURE_SPEC_CTRL_SSBD (18*32+31) /* "" Speculative Store Bypass Disable */
/*
/* Intel MSRs. Some also available on other CPUs */
+#define MSR_TEST_CTRL 0x00000033
+#define MSR_TEST_CTRL_SPLIT_LOCK_DETECT_BIT 29
+#define MSR_TEST_CTRL_SPLIT_LOCK_DETECT BIT(MSR_TEST_CTRL_SPLIT_LOCK_DETECT_BIT)
+
#define MSR_IA32_SPEC_CTRL 0x00000048 /* Speculation Control */
#define SPEC_CTRL_IBRS BIT(0) /* Indirect Branch Restricted Speculation */
#define SPEC_CTRL_STIBP_SHIFT 1 /* Single Thread Indirect Branch Predictor (STIBP) bit */
*/
#define MSR_IA32_UMWAIT_CONTROL_TIME_MASK (~0x03U)
+/* Abbreviated from Intel SDM name IA32_CORE_CAPABILITIES */
+#define MSR_IA32_CORE_CAPS 0x000000cf
+#define MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT_BIT 5
+#define MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT BIT(MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT_BIT)
+
#define MSR_PKG_CST_CONFIG_CONTROL 0x000000e2
#define NHM_C3_AUTO_DEMOTE (1UL << 25)
#define NHM_C1_AUTO_DEMOTE (1UL << 26)
static int do_register(int argc, char **argv)
{
+ struct bpf_object_load_attr load_attr = {};
const struct bpf_map_def *def;
struct bpf_map_info info = {};
__u32 info_len = sizeof(info);
set_max_rlimit();
- if (bpf_object__load(obj)) {
+ load_attr.obj = obj;
+ if (verifier_logs)
+ /* log_level1 + log_level2 + stats, but not stable UAPI */
+ load_attr.log_level = 1 + 2 + 4;
+
+ if (bpf_object__load_xattr(&load_attr)) {
bpf_object__close(obj);
return -1;
}
err = cmd_select(cmds, argc, argv, do_help);
- btf__free(btf_vmlinux);
+ if (!IS_ERR(btf_vmlinux))
+ btf__free(btf_vmlinux);
+
return err;
}
LIBBPF_SRC := $(abspath ../../lib/bpf)
BPFOBJ := $(OUTPUT)/libbpf.a
BPF_INCLUDE := $(OUTPUT)
-INCLUDES := -I$(BPF_INCLUDE) -I$(OUTPUT) -I$(abspath ../../lib)
+INCLUDES := -I$(OUTPUT) -I$(BPF_INCLUDE) -I$(abspath ../../lib)
CFLAGS := -g -Wall
# Try to detect best kernel BTF source
{
uint64_t old, new = argc;
- argv = argv;
+ (void)argv;
do {
old = __sync_val_compare_and_swap(&x, 0, 0);
} while (!__sync_bool_compare_and_swap(&x, old, new));
#define __LINUX_BITS_H
#include <linux/const.h>
+#include <vdso/bits.h>
#include <asm/bitsperlong.h>
-#define BIT(nr) (UL(1) << (nr))
#define BIT_ULL(nr) (ULL(1) << (nr))
#define BIT_MASK(nr) (UL(1) << ((nr) % BITS_PER_LONG))
#define BIT_WORD(nr) ((nr) / BITS_PER_LONG)
* position @h. For example
* GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
*/
-#define GENMASK(h, l) \
+#if !defined(__ASSEMBLY__) && \
+ (!defined(CONFIG_CC_IS_GCC) || CONFIG_GCC_VERSION >= 49000)
+#include <linux/build_bug.h>
+#define GENMASK_INPUT_CHECK(h, l) \
+ (BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
+ __builtin_constant_p((l) > (h)), (l) > (h), 0)))
+#else
+/*
+ * BUILD_BUG_ON_ZERO is not available in h files included from asm files,
+ * disable the input check if that is the case.
+ */
+#define GENMASK_INPUT_CHECK(h, l) 0
+#endif
+
+#define __GENMASK(h, l) \
(((~UL(0)) - (UL(1) << (l)) + 1) & \
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
+#define GENMASK(h, l) \
+ (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
-#define GENMASK_ULL(h, l) \
+#define __GENMASK_ULL(h, l) \
(((~ULL(0)) - (ULL(1) << (l)) + 1) & \
(~ULL(0) >> (BITS_PER_LONG_LONG - 1 - (h))))
+#define GENMASK_ULL(h, l) \
+ (GENMASK_INPUT_CHECK(h, l) + __GENMASK_ULL(h, l))
#endif /* __LINUX_BITS_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_BUILD_BUG_H
+#define _LINUX_BUILD_BUG_H
+
+#include <linux/compiler.h>
+
+#ifdef __CHECKER__
+#define BUILD_BUG_ON_ZERO(e) (0)
+#else /* __CHECKER__ */
+/*
+ * Force a compilation error if condition is true, but also produce a
+ * result (of value 0 and type int), so the expression can be used
+ * e.g. in a structure initializer (or where-ever else comma expressions
+ * aren't permitted).
+ */
+#define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
+#endif /* __CHECKER__ */
+
+/* Force a compilation error if a constant expression is not a power of 2 */
+#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) \
+ BUILD_BUG_ON(((n) & ((n) - 1)) != 0)
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \
+ BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
+
+/*
+ * BUILD_BUG_ON_INVALID() permits the compiler to check the validity of the
+ * expression but avoids the generation of any code, even if that expression
+ * has side-effects.
+ */
+#define BUILD_BUG_ON_INVALID(e) ((void)(sizeof((__force long)(e))))
+
+/**
+ * BUILD_BUG_ON_MSG - break compile if a condition is true & emit supplied
+ * error message.
+ * @condition: the condition which the compiler should know is false.
+ *
+ * See BUILD_BUG_ON for description.
+ */
+#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
+
+/**
+ * BUILD_BUG_ON - break compile if a condition is true.
+ * @condition: the condition which the compiler should know is false.
+ *
+ * If you have some code which relies on certain constants being equal, or
+ * some other compile-time-evaluated condition, you should use BUILD_BUG_ON to
+ * detect if someone changes it.
+ */
+#define BUILD_BUG_ON(condition) \
+ BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
+
+/**
+ * BUILD_BUG - break compile if used.
+ *
+ * If you have some code that you expect the compiler to eliminate at
+ * build time, you should use BUILD_BUG to detect if it is
+ * unexpectedly used.
+ */
+#define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
+
+/**
+ * static_assert - check integer constant expression at build time
+ *
+ * static_assert() is a wrapper for the C11 _Static_assert, with a
+ * little macro magic to make the message optional (defaulting to the
+ * stringification of the tested expression).
+ *
+ * Contrary to BUILD_BUG_ON(), static_assert() can be used at global
+ * scope, but requires the expression to be an integer constant
+ * expression (i.e., it is not enough that __builtin_constant_p() is
+ * true for expr).
+ *
+ * Also note that BUILD_BUG_ON() fails the build if the condition is
+ * true, while static_assert() fails the build if the expression is
+ * false.
+ */
+#ifndef static_assert
+#define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
+#define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
+#endif // static_assert
+
+#endif /* _LINUX_BUILD_BUG_H */
# define __compiletime_error(message)
#endif
+#ifdef __OPTIMIZE__
+# define __compiletime_assert(condition, msg, prefix, suffix) \
+ do { \
+ extern void prefix ## suffix(void) __compiletime_error(msg); \
+ if (!(condition)) \
+ prefix ## suffix(); \
+ } while (0)
+#else
+# define __compiletime_assert(condition, msg, prefix, suffix) do { } while (0)
+#endif
+
+#define _compiletime_assert(condition, msg, prefix, suffix) \
+ __compiletime_assert(condition, msg, prefix, suffix)
+
+/**
+ * compiletime_assert - break build and emit msg if condition is false
+ * @condition: a compile-time constant condition to check
+ * @msg: a message to emit if condition is false
+ *
+ * In tradition of POSIX assert, this macro will break the build if the
+ * supplied condition is *false*, emitting the supplied error message if the
+ * compiler has support to do so.
+ */
+#define compiletime_assert(condition, msg) \
+ _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
+
/* Optimization barrier */
/* The "volatile" is due to gcc bugs */
#define barrier() __asm__ __volatile__("": : :"memory")
#ifndef _LINUX_CONST_H
#define _LINUX_CONST_H
-#include <uapi/linux/const.h>
-
-#define UL(x) (_UL(x))
-#define ULL(x) (_ULL(x))
+#include <vdso/const.h>
#endif /* _LINUX_CONST_H */
#include <stdarg.h>
#include <stddef.h>
#include <assert.h>
+#include <linux/build_bug.h>
#include <linux/compiler.h>
#include <endian.h>
#include <byteswap.h>
(type *)((char *)__mptr - offsetof(type, member)); })
#endif
-#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
-#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
-
#ifndef max
#define max(x, y) ({ \
typeof(x) _max1 = (x); \
#define DRM_IOCTL_SYNCOBJ_TRANSFER DRM_IOWR(0xCC, struct drm_syncobj_transfer)
#define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL DRM_IOWR(0xCD, struct drm_syncobj_timeline_array)
+#define DRM_IOCTL_MODE_GETFB2 DRM_IOWR(0xCE, struct drm_mode_fb_cmd2)
+
/**
* Device specific ioctls should only be in their respective headers
* The device specific ioctl range is from 0x40 to 0x9f.
* By default, new contexts allow persistence.
*/
#define I915_CONTEXT_PARAM_PERSISTENCE 0xb
+
+/*
+ * I915_CONTEXT_PARAM_RINGSIZE:
+ *
+ * Sets the size of the CS ringbuffer to use for logical ring contexts. This
+ * applies a limit of how many batches can be queued to HW before the caller
+ * is blocked due to lack of space for more commands.
+ *
+ * Only reliably possible to be set prior to first use, i.e. during
+ * construction. At any later point, the current execution must be flushed as
+ * the ring can only be changed while the context is idle. Note, the ringsize
+ * can be specified as a constructor property, see
+ * I915_CONTEXT_CREATE_EXT_SETPARAM, but can also be set later if required.
+ *
+ * Only applies to the current set of engine and lost when those engines
+ * are replaced by a new mapping (see I915_CONTEXT_PARAM_ENGINES).
+ *
+ * Must be between 4 - 512 KiB, in intervals of page size [4 KiB].
+ * Default is 16 KiB.
+ */
+#define I915_CONTEXT_PARAM_RINGSIZE 0xc
/* Must be kept compact -- no holes and well documented */
__u64 value;
* ifindex, but doesn't require a map to do so.
* Return
* **XDP_REDIRECT** on success, or the value of the two lower bits
- * of the **flags* argument on error.
+ * of the *flags* argument on error.
*
* int bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags)
* Description
#define FS_IOC_REMOVE_ENCRYPTION_KEY _IOWR('f', 24, struct fscrypt_remove_key_arg)
#define FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS _IOWR('f', 25, struct fscrypt_remove_key_arg)
#define FS_IOC_GET_ENCRYPTION_KEY_STATUS _IOWR('f', 26, struct fscrypt_get_key_status_arg)
+#define FS_IOC_GET_ENCRYPTION_NONCE _IOR('f', 27, __u8[16])
/**********************************************************************/
__u32 size; /* amount of bytes */
__u32 op; /* type of operation */
__u64 buf; /* buffer in userspace */
- __u8 ar; /* the access register number */
- __u8 reserved[31]; /* should be set to 0 */
+ union {
+ __u8 ar; /* the access register number */
+ __u32 sida_offset; /* offset into the sida */
+ __u8 reserved[32]; /* should be set to 0 */
+ };
};
/* types for kvm_s390_mem_op->op */
#define KVM_S390_MEMOP_LOGICAL_READ 0
#define KVM_S390_MEMOP_LOGICAL_WRITE 1
+#define KVM_S390_MEMOP_SIDA_READ 2
+#define KVM_S390_MEMOP_SIDA_WRITE 3
/* flags for kvm_s390_mem_op->flags */
#define KVM_S390_MEMOP_F_CHECK_ONLY (1ULL << 0)
#define KVM_S390_MEMOP_F_INJECT_EXCEPTION (1ULL << 1)
#define KVM_CAP_ARM_NISV_TO_USER 177
#define KVM_CAP_ARM_INJECT_EXT_DABT 178
#define KVM_CAP_S390_VCPU_RESETS 179
+#define KVM_CAP_S390_PROTECTED 180
+#define KVM_CAP_PPC_SECURE_GUEST 181
#ifdef KVM_CAP_IRQ_ROUTING
#define KVM_S390_NORMAL_RESET _IO(KVMIO, 0xc3)
#define KVM_S390_CLEAR_RESET _IO(KVMIO, 0xc4)
+struct kvm_s390_pv_sec_parm {
+ __u64 origin;
+ __u64 length;
+};
+
+struct kvm_s390_pv_unp {
+ __u64 addr;
+ __u64 size;
+ __u64 tweak;
+};
+
+enum pv_cmd_id {
+ KVM_PV_ENABLE,
+ KVM_PV_DISABLE,
+ KVM_PV_SET_SEC_PARMS,
+ KVM_PV_UNPACK,
+ KVM_PV_VERIFY,
+ KVM_PV_PREP_RESET,
+ KVM_PV_UNSHARE_ALL,
+};
+
+struct kvm_pv_cmd {
+ __u32 cmd; /* Command to be executed */
+ __u16 rc; /* Ultravisor return code */
+ __u16 rrc; /* Ultravisor return reason code */
+ __u64 data; /* Data or address */
+ __u32 flags; /* flags for future extensions. Must be 0 for now */
+ __u32 reserved[3];
+};
+
+/* Available with KVM_CAP_S390_PROTECTED */
+#define KVM_S390_PV_COMMAND _IOWR(KVMIO, 0xc5, struct kvm_pv_cmd)
+
/* Secure Encrypted Virtualization command */
enum sev_cmd_id {
/* Guest initialization commands */
#define KVM_HYPERV_CONN_ID_MASK 0x00ffffff
#define KVM_HYPERV_EVENTFD_DEASSIGN (1 << 0)
+#define KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE (1 << 0)
+#define KVM_DIRTY_LOG_INITIALLY_SET (1 << 1)
+
#endif /* __LINUX_KVM_H */
#include <asm/mman.h>
#include <asm-generic/hugetlb_encode.h>
-#define MREMAP_MAYMOVE 1
-#define MREMAP_FIXED 2
+#define MREMAP_MAYMOVE 1
+#define MREMAP_FIXED 2
+#define MREMAP_DONTUNMAP 4
#define OVERCOMMIT_GUESS 0
#define OVERCOMMIT_ALWAYS 1
/* Flags for the clone3() syscall. */
#define CLONE_CLEAR_SIGHAND 0x100000000ULL /* Clear any signal handler and reset to SIG_DFL. */
+#define CLONE_INTO_CGROUP 0x200000000ULL /* Clone into a specific cgroup given the right permissions. */
/*
* cloning flags intersect with CSIGNAL so can be used with unshare and clone3
* @set_tid_size: This defines the size of the array referenced
* in @set_tid. This cannot be larger than the
* kernel's limit of nested PID namespaces.
+ * @cgroup: If CLONE_INTO_CGROUP is specified set this to
+ * a file descriptor for the cgroup.
*
* The structure is versioned by size and thus extensible.
* New struct members must go at the end of the struct and
__aligned_u64 tls;
__aligned_u64 set_tid;
__aligned_u64 set_tid_size;
+ __aligned_u64 cgroup;
};
#endif
#define CLONE_ARGS_SIZE_VER0 64 /* sizeof first published struct */
#define CLONE_ARGS_SIZE_VER1 80 /* sizeof second published struct */
+#define CLONE_ARGS_SIZE_VER2 88 /* sizeof third published struct */
/*
* Scheduling policies
#define VHOST_VSOCK_SET_GUEST_CID _IOW(VHOST_VIRTIO, 0x60, __u64)
#define VHOST_VSOCK_SET_RUNNING _IOW(VHOST_VIRTIO, 0x61, int)
+/* VHOST_VDPA specific defines */
+
+/* Get the device id. The device ids follow the same definition of
+ * the device id defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_DEVICE_ID _IOR(VHOST_VIRTIO, 0x70, __u32)
+/* Get and set the status. The status bits follow the same definition
+ * of the device status defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_STATUS _IOR(VHOST_VIRTIO, 0x71, __u8)
+#define VHOST_VDPA_SET_STATUS _IOW(VHOST_VIRTIO, 0x72, __u8)
+/* Get and set the device config. The device config follows the same
+ * definition of the device config defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_CONFIG _IOR(VHOST_VIRTIO, 0x73, \
+ struct vhost_vdpa_config)
+#define VHOST_VDPA_SET_CONFIG _IOW(VHOST_VIRTIO, 0x74, \
+ struct vhost_vdpa_config)
+/* Enable/disable the ring. */
+#define VHOST_VDPA_SET_VRING_ENABLE _IOW(VHOST_VIRTIO, 0x75, \
+ struct vhost_vring_state)
+/* Get the max ring size. */
+#define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16)
+
#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __VDSO_BITS_H
+#define __VDSO_BITS_H
+
+#include <vdso/const.h>
+
+#define BIT(nr) (UL(1) << (nr))
+
+#endif /* __VDSO_BITS_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __VDSO_CONST_H
+#define __VDSO_CONST_H
+
+#include <uapi/linux/const.h>
+
+#define UL(x) (_UL(x))
+#define ULL(x) (_ULL(x))
+
+#endif /* __VDSO_CONST_H */
__u32 array_mmap:1;
/* BTF_FUNC_GLOBAL is supported */
__u32 btf_func_global:1;
+ /* kernel support for expected_attach_type in BPF_PROG_LOAD */
+ __u32 exp_attach_type:1;
};
enum reloc_type {
int sym_off;
};
+struct bpf_sec_def;
+
+typedef struct bpf_link *(*attach_fn_t)(const struct bpf_sec_def *sec,
+ struct bpf_program *prog);
+
+struct bpf_sec_def {
+ const char *sec;
+ size_t len;
+ enum bpf_prog_type prog_type;
+ enum bpf_attach_type expected_attach_type;
+ bool is_exp_attach_type_optional;
+ bool is_attachable;
+ bool is_attach_btf;
+ attach_fn_t attach_fn;
+};
+
/*
* bpf_prog should be a better name but it has been used in
* linux/filter.h.
char *name;
int prog_ifindex;
char *section_name;
+ const struct bpf_sec_def *sec_def;
/* section_name with / replaced by _; makes recursive pinning
* in bpf_object__pin_programs easier
*/
}
static int
+bpf_object__probe_exp_attach_type(struct bpf_object *obj)
+{
+ struct bpf_load_program_attr attr;
+ struct bpf_insn insns[] = {
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ };
+ int fd;
+
+ memset(&attr, 0, sizeof(attr));
+ /* use any valid combination of program type and (optional)
+ * non-zero expected attach type (i.e., not a BPF_CGROUP_INET_INGRESS)
+ * to see if kernel supports expected_attach_type field for
+ * BPF_PROG_LOAD command
+ */
+ attr.prog_type = BPF_PROG_TYPE_CGROUP_SOCK;
+ attr.expected_attach_type = BPF_CGROUP_INET_SOCK_CREATE;
+ attr.insns = insns;
+ attr.insns_cnt = ARRAY_SIZE(insns);
+ attr.license = "GPL";
+
+ fd = bpf_load_program_xattr(&attr, NULL, 0);
+ if (fd >= 0) {
+ obj->caps.exp_attach_type = 1;
+ close(fd);
+ return 1;
+ }
+ return 0;
+}
+
+static int
bpf_object__probe_caps(struct bpf_object *obj)
{
int (*probe_fn[])(struct bpf_object *obj) = {
bpf_object__probe_btf_func_global,
bpf_object__probe_btf_datasec,
bpf_object__probe_array_mmap,
+ bpf_object__probe_exp_attach_type,
};
int i, ret;
memset(&load_attr, 0, sizeof(struct bpf_load_program_attr));
load_attr.prog_type = prog->type;
- load_attr.expected_attach_type = prog->expected_attach_type;
+ /* old kernels might not support specifying expected_attach_type */
+ if (!prog->caps->exp_attach_type && prog->sec_def &&
+ prog->sec_def->is_exp_attach_type_optional)
+ load_attr.expected_attach_type = 0;
+ else
+ load_attr.expected_attach_type = prog->expected_attach_type;
if (prog->caps->name)
load_attr.name = prog->name;
load_attr.insns = insns;
return 0;
}
+static const struct bpf_sec_def *find_sec_def(const char *sec_name);
+
static struct bpf_object *
__bpf_object__open(const char *path, const void *obj_buf, size_t obj_buf_sz,
const struct bpf_object_open_opts *opts)
bpf_object__elf_finish(obj);
bpf_object__for_each_program(prog, obj) {
- enum bpf_prog_type prog_type;
- enum bpf_attach_type attach_type;
-
- if (prog->type != BPF_PROG_TYPE_UNSPEC)
- continue;
-
- err = libbpf_prog_type_by_name(prog->section_name, &prog_type,
- &attach_type);
- if (err == -ESRCH)
+ prog->sec_def = find_sec_def(prog->section_name);
+ if (!prog->sec_def)
/* couldn't guess, but user might manually specify */
continue;
- if (err)
- goto out;
- bpf_program__set_type(prog, prog_type);
- bpf_program__set_expected_attach_type(prog, attach_type);
- if (prog_type == BPF_PROG_TYPE_TRACING ||
- prog_type == BPF_PROG_TYPE_EXT)
+ bpf_program__set_type(prog, prog->sec_def->prog_type);
+ bpf_program__set_expected_attach_type(prog,
+ prog->sec_def->expected_attach_type);
+
+ if (prog->sec_def->prog_type == BPF_PROG_TYPE_TRACING ||
+ prog->sec_def->prog_type == BPF_PROG_TYPE_EXT)
prog->attach_prog_fd = OPTS_GET(opts, attach_prog_fd, 0);
}
prog->expected_attach_type = type;
}
-#define BPF_PROG_SEC_IMPL(string, ptype, eatype, is_attachable, btf, atype) \
- { string, sizeof(string) - 1, ptype, eatype, is_attachable, btf, atype }
+#define BPF_PROG_SEC_IMPL(string, ptype, eatype, eatype_optional, \
+ attachable, attach_btf) \
+ { \
+ .sec = string, \
+ .len = sizeof(string) - 1, \
+ .prog_type = ptype, \
+ .expected_attach_type = eatype, \
+ .is_exp_attach_type_optional = eatype_optional, \
+ .is_attachable = attachable, \
+ .is_attach_btf = attach_btf, \
+ }
/* Programs that can NOT be attached. */
#define BPF_PROG_SEC(string, ptype) BPF_PROG_SEC_IMPL(string, ptype, 0, 0, 0, 0)
/* Programs that can be attached. */
#define BPF_APROG_SEC(string, ptype, atype) \
- BPF_PROG_SEC_IMPL(string, ptype, 0, 1, 0, atype)
+ BPF_PROG_SEC_IMPL(string, ptype, atype, true, 1, 0)
/* Programs that must specify expected attach type at load time. */
#define BPF_EAPROG_SEC(string, ptype, eatype) \
- BPF_PROG_SEC_IMPL(string, ptype, eatype, 1, 0, eatype)
+ BPF_PROG_SEC_IMPL(string, ptype, eatype, false, 1, 0)
/* Programs that use BTF to identify attach point */
#define BPF_PROG_BTF(string, ptype, eatype) \
- BPF_PROG_SEC_IMPL(string, ptype, eatype, 0, 1, 0)
+ BPF_PROG_SEC_IMPL(string, ptype, eatype, false, 0, 1)
/* Programs that can be attached but attach type can't be identified by section
* name. Kept for backward compatibility.
__VA_ARGS__ \
}
-struct bpf_sec_def;
-
-typedef struct bpf_link *(*attach_fn_t)(const struct bpf_sec_def *sec,
- struct bpf_program *prog);
-
static struct bpf_link *attach_kprobe(const struct bpf_sec_def *sec,
struct bpf_program *prog);
static struct bpf_link *attach_tp(const struct bpf_sec_def *sec,
static struct bpf_link *attach_lsm(const struct bpf_sec_def *sec,
struct bpf_program *prog);
-struct bpf_sec_def {
- const char *sec;
- size_t len;
- enum bpf_prog_type prog_type;
- enum bpf_attach_type expected_attach_type;
- bool is_attachable;
- bool is_attach_btf;
- enum bpf_attach_type attach_type;
- attach_fn_t attach_fn;
-};
-
static const struct bpf_sec_def section_defs[] = {
BPF_PROG_SEC("socket", BPF_PROG_TYPE_SOCKET_FILTER),
BPF_PROG_SEC("sk_reuseport", BPF_PROG_TYPE_SK_REUSEPORT),
continue;
if (!section_defs[i].is_attachable)
return -EINVAL;
- *attach_type = section_defs[i].attach_type;
+ *attach_type = section_defs[i].expected_attach_type;
return 0;
}
pr_debug("failed to guess attach type based on ELF section name '%s'\n", name);
struct bpf_link *
bpf_program__attach_cgroup(struct bpf_program *prog, int cgroup_fd)
{
- const struct bpf_sec_def *sec_def;
enum bpf_attach_type attach_type;
char errmsg[STRERR_BUFSIZE];
struct bpf_link *link;
link->detach = &bpf_link__detach_fd;
attach_type = bpf_program__get_expected_attach_type(prog);
- if (!attach_type) {
- sec_def = find_sec_def(bpf_program__title(prog, false));
- if (sec_def)
- attach_type = sec_def->attach_type;
- }
link_fd = bpf_link_create(prog_fd, cgroup_fd, attach_type, NULL);
if (link_fd < 0) {
link_fd = -errno;
struct bpf_xdp_set_link_opts {
size_t sz;
- __u32 old_fd;
+ int old_fd;
};
#define bpf_xdp_set_link_opts__last_field old_fd
struct ifinfomsg ifinfo;
char attrbuf[64];
} req;
- __u32 nl_pid;
+ __u32 nl_pid = 0;
sock = libbpf_netlink_open(&nl_pid);
if (sock < 0)
{
struct xdp_id_md xdp_id = {};
int sock, ret;
- __u32 nl_pid;
+ __u32 nl_pid = 0;
__u32 mask;
if (flags & ~XDP_FLAGS_MASK || !info_size)
static __u32 get_xdp_id(struct xdp_link_info *info, __u32 flags)
{
- if (info->attach_mode != XDP_ATTACHED_MULTI)
+ flags &= XDP_FLAGS_MODES;
+
+ if (info->attach_mode != XDP_ATTACHED_MULTI && !flags)
return info->prog_id;
if (flags & XDP_FLAGS_DRV_MODE)
return info->drv_prog_id;
* it.
*/
for (;
- &insn->list != &file->insn_list &&
- insn->sec == func->sec &&
- insn->offset >= func->offset;
-
+ &insn->list != &file->insn_list && insn->func && insn->func->pfunc == func;
insn = insn->first_jump_src ?: list_prev_entry(insn, list)) {
if (insn != orig_insn && insn->type == INSN_JUMP_DYNAMIC)
}
if (state->bp_scratch) {
- WARN("%s uses BP as a scratch register",
- func->name);
+ WARN_FUNC("BP used as a scratch register",
+ insn->sec, insn->offset);
return 1;
}
!strcmp(insn->sec->name, ".altinstr_aux"))
return true;
+ if (!insn->func)
+ return false;
+
+ /*
+ * CONFIG_UBSAN_TRAP inserts a UD2 when it sees
+ * __builtin_unreachable(). The BUG() macro has an unreachable() after
+ * the UD2, which causes GCC's undefined trap logic to emit another UD2
+ * (or occasionally a JMP to UD2).
+ */
+ if (list_prev_entry(insn, list)->dead_end &&
+ (insn->type == INSN_BUG ||
+ (insn->type == INSN_JUMP_UNCONDITIONAL &&
+ insn->jump_dest && insn->jump_dest->type == INSN_BUG)))
+ return true;
+
/*
* Check if this (or a subsequent) instruction is related to
* CONFIG_UBSAN or CONFIG_KASAN.
*
* End the search at 5 instructions to avoid going into the weeds.
*/
- if (!insn->func)
- return false;
for (i = 0; i < 5; i++) {
if (is_kasan_insn(insn) || is_ubsan_insn(insn))
if (*o < s->offset)
return -1;
- if (*o > s->offset + s->len)
+ if (*o >= s->offset + s->len)
return 1;
return 0;
offset &= OFFSET_STRIDE_MASK;
ol = offset;
- oh = offset >> 32;
+ oh = (offset >> 16) >> 16;
__jhash_mix(ol, oh, idx);
char *name;
size_t nr_sections;
Elf64_Addr orc_ip_addr = 0;
- size_t shstrtab_idx;
+ size_t shstrtab_idx, strtab_idx = 0;
Elf *elf;
Elf_Scn *scn;
GElf_Shdr sh;
if (!strcmp(name, ".symtab")) {
symtab = data;
+ } else if (!strcmp(name, ".strtab")) {
+ strtab_idx = i;
} else if (!strcmp(name, ".orc_unwind")) {
orc = data->d_buf;
orc_size = sh.sh_size;
}
}
- if (!symtab || !orc || !orc_ip)
+ if (!symtab || !strtab_idx || !orc || !orc_ip)
return 0;
if (orc_size % sizeof(*orc) != 0) {
return -1;
}
- scn = elf_getscn(elf, sym.st_shndx);
- if (!scn) {
- WARN_ELF("elf_getscn");
- return -1;
- }
-
- if (!gelf_getshdr(scn, &sh)) {
- WARN_ELF("gelf_getshdr");
- return -1;
- }
-
- name = elf_strptr(elf, shstrtab_idx, sh.sh_name);
- if (!name || !*name) {
- WARN_ELF("elf_strptr");
- return -1;
+ if (GELF_ST_TYPE(sym.st_info) == STT_SECTION) {
+ scn = elf_getscn(elf, sym.st_shndx);
+ if (!scn) {
+ WARN_ELF("elf_getscn");
+ return -1;
+ }
+
+ if (!gelf_getshdr(scn, &sh)) {
+ WARN_ELF("gelf_getshdr");
+ return -1;
+ }
+
+ name = elf_strptr(elf, shstrtab_idx, sh.sh_name);
+ if (!name) {
+ WARN_ELF("elf_strptr");
+ return -1;
+ }
+ } else {
+ name = elf_strptr(elf, strtab_idx, sym.st_name);
+ if (!name) {
+ WARN_ELF("elf_strptr");
+ return -1;
+ }
}
printf("%s+%llx:", name, (unsigned long long)rela.r_addend);
struct orc_entry *orc;
struct rela *rela;
- if (!insn_sec->sym) {
- WARN("missing symbol for section %s", insn_sec->name);
- return -1;
- }
-
/* populate ORC data */
orc = (struct orc_entry *)u_sec->data->d_buf + idx;
memcpy(orc, o, sizeof(*orc));
}
memset(rela, 0, sizeof(*rela));
- rela->sym = insn_sec->sym;
- rela->addend = insn_off;
+ if (insn_sec->sym) {
+ rela->sym = insn_sec->sym;
+ rela->addend = insn_off;
+ } else {
+ /*
+ * The Clang assembler doesn't produce section symbols, so we
+ * have to reference the function symbol instead:
+ */
+ rela->sym = find_symbol_containing(insn_sec, insn_off);
+ if (!rela->sym) {
+ /*
+ * Hack alert. This happens when we need to reference
+ * the NOP pad insn immediately after the function.
+ */
+ rela->sym = find_symbol_containing(insn_sec,
+ insn_off - 1);
+ }
+ if (!rela->sym) {
+ WARN("missing symbol for insn at offset 0x%lx\n",
+ insn_off);
+ return -1;
+ }
+
+ rela->addend = insn_off - rela->sym->offset;
+ }
+
rela->type = R_X86_64_PC32;
rela->offset = idx * sizeof(int);
rela->sec = ip_relasec;
#
# The abi is "common", "64" or "x32" for this file.
#
-0 common read __x64_sys_read
-1 common write __x64_sys_write
-2 common open __x64_sys_open
-3 common close __x64_sys_close
-4 common stat __x64_sys_newstat
-5 common fstat __x64_sys_newfstat
-6 common lstat __x64_sys_newlstat
-7 common poll __x64_sys_poll
-8 common lseek __x64_sys_lseek
-9 common mmap __x64_sys_mmap
-10 common mprotect __x64_sys_mprotect
-11 common munmap __x64_sys_munmap
-12 common brk __x64_sys_brk
-13 64 rt_sigaction __x64_sys_rt_sigaction
-14 common rt_sigprocmask __x64_sys_rt_sigprocmask
-15 64 rt_sigreturn __x64_sys_rt_sigreturn/ptregs
-16 64 ioctl __x64_sys_ioctl
-17 common pread64 __x64_sys_pread64
-18 common pwrite64 __x64_sys_pwrite64
-19 64 readv __x64_sys_readv
-20 64 writev __x64_sys_writev
-21 common access __x64_sys_access
-22 common pipe __x64_sys_pipe
-23 common select __x64_sys_select
-24 common sched_yield __x64_sys_sched_yield
-25 common mremap __x64_sys_mremap
-26 common msync __x64_sys_msync
-27 common mincore __x64_sys_mincore
-28 common madvise __x64_sys_madvise
-29 common shmget __x64_sys_shmget
-30 common shmat __x64_sys_shmat
-31 common shmctl __x64_sys_shmctl
-32 common dup __x64_sys_dup
-33 common dup2 __x64_sys_dup2
-34 common pause __x64_sys_pause
-35 common nanosleep __x64_sys_nanosleep
-36 common getitimer __x64_sys_getitimer
-37 common alarm __x64_sys_alarm
-38 common setitimer __x64_sys_setitimer
-39 common getpid __x64_sys_getpid
-40 common sendfile __x64_sys_sendfile64
-41 common socket __x64_sys_socket
-42 common connect __x64_sys_connect
-43 common accept __x64_sys_accept
-44 common sendto __x64_sys_sendto
-45 64 recvfrom __x64_sys_recvfrom
-46 64 sendmsg __x64_sys_sendmsg
-47 64 recvmsg __x64_sys_recvmsg
-48 common shutdown __x64_sys_shutdown
-49 common bind __x64_sys_bind
-50 common listen __x64_sys_listen
-51 common getsockname __x64_sys_getsockname
-52 common getpeername __x64_sys_getpeername
-53 common socketpair __x64_sys_socketpair
-54 64 setsockopt __x64_sys_setsockopt
-55 64 getsockopt __x64_sys_getsockopt
-56 common clone __x64_sys_clone/ptregs
-57 common fork __x64_sys_fork/ptregs
-58 common vfork __x64_sys_vfork/ptregs
-59 64 execve __x64_sys_execve/ptregs
-60 common exit __x64_sys_exit
-61 common wait4 __x64_sys_wait4
-62 common kill __x64_sys_kill
-63 common uname __x64_sys_newuname
-64 common semget __x64_sys_semget
-65 common semop __x64_sys_semop
-66 common semctl __x64_sys_semctl
-67 common shmdt __x64_sys_shmdt
-68 common msgget __x64_sys_msgget
-69 common msgsnd __x64_sys_msgsnd
-70 common msgrcv __x64_sys_msgrcv
-71 common msgctl __x64_sys_msgctl
-72 common fcntl __x64_sys_fcntl
-73 common flock __x64_sys_flock
-74 common fsync __x64_sys_fsync
-75 common fdatasync __x64_sys_fdatasync
-76 common truncate __x64_sys_truncate
-77 common ftruncate __x64_sys_ftruncate
-78 common getdents __x64_sys_getdents
-79 common getcwd __x64_sys_getcwd
-80 common chdir __x64_sys_chdir
-81 common fchdir __x64_sys_fchdir
-82 common rename __x64_sys_rename
-83 common mkdir __x64_sys_mkdir
-84 common rmdir __x64_sys_rmdir
-85 common creat __x64_sys_creat
-86 common link __x64_sys_link
-87 common unlink __x64_sys_unlink
-88 common symlink __x64_sys_symlink
-89 common readlink __x64_sys_readlink
-90 common chmod __x64_sys_chmod
-91 common fchmod __x64_sys_fchmod
-92 common chown __x64_sys_chown
-93 common fchown __x64_sys_fchown
-94 common lchown __x64_sys_lchown
-95 common umask __x64_sys_umask
-96 common gettimeofday __x64_sys_gettimeofday
-97 common getrlimit __x64_sys_getrlimit
-98 common getrusage __x64_sys_getrusage
-99 common sysinfo __x64_sys_sysinfo
-100 common times __x64_sys_times
-101 64 ptrace __x64_sys_ptrace
-102 common getuid __x64_sys_getuid
-103 common syslog __x64_sys_syslog
-104 common getgid __x64_sys_getgid
-105 common setuid __x64_sys_setuid
-106 common setgid __x64_sys_setgid
-107 common geteuid __x64_sys_geteuid
-108 common getegid __x64_sys_getegid
-109 common setpgid __x64_sys_setpgid
-110 common getppid __x64_sys_getppid
-111 common getpgrp __x64_sys_getpgrp
-112 common setsid __x64_sys_setsid
-113 common setreuid __x64_sys_setreuid
-114 common setregid __x64_sys_setregid
-115 common getgroups __x64_sys_getgroups
-116 common setgroups __x64_sys_setgroups
-117 common setresuid __x64_sys_setresuid
-118 common getresuid __x64_sys_getresuid
-119 common setresgid __x64_sys_setresgid
-120 common getresgid __x64_sys_getresgid
-121 common getpgid __x64_sys_getpgid
-122 common setfsuid __x64_sys_setfsuid
-123 common setfsgid __x64_sys_setfsgid
-124 common getsid __x64_sys_getsid
-125 common capget __x64_sys_capget
-126 common capset __x64_sys_capset
-127 64 rt_sigpending __x64_sys_rt_sigpending
-128 64 rt_sigtimedwait __x64_sys_rt_sigtimedwait
-129 64 rt_sigqueueinfo __x64_sys_rt_sigqueueinfo
-130 common rt_sigsuspend __x64_sys_rt_sigsuspend
-131 64 sigaltstack __x64_sys_sigaltstack
-132 common utime __x64_sys_utime
-133 common mknod __x64_sys_mknod
+0 common read sys_read
+1 common write sys_write
+2 common open sys_open
+3 common close sys_close
+4 common stat sys_newstat
+5 common fstat sys_newfstat
+6 common lstat sys_newlstat
+7 common poll sys_poll
+8 common lseek sys_lseek
+9 common mmap sys_mmap
+10 common mprotect sys_mprotect
+11 common munmap sys_munmap
+12 common brk sys_brk
+13 64 rt_sigaction sys_rt_sigaction
+14 common rt_sigprocmask sys_rt_sigprocmask
+15 64 rt_sigreturn sys_rt_sigreturn
+16 64 ioctl sys_ioctl
+17 common pread64 sys_pread64
+18 common pwrite64 sys_pwrite64
+19 64 readv sys_readv
+20 64 writev sys_writev
+21 common access sys_access
+22 common pipe sys_pipe
+23 common select sys_select
+24 common sched_yield sys_sched_yield
+25 common mremap sys_mremap
+26 common msync sys_msync
+27 common mincore sys_mincore
+28 common madvise sys_madvise
+29 common shmget sys_shmget
+30 common shmat sys_shmat
+31 common shmctl sys_shmctl
+32 common dup sys_dup
+33 common dup2 sys_dup2
+34 common pause sys_pause
+35 common nanosleep sys_nanosleep
+36 common getitimer sys_getitimer
+37 common alarm sys_alarm
+38 common setitimer sys_setitimer
+39 common getpid sys_getpid
+40 common sendfile sys_sendfile64
+41 common socket sys_socket
+42 common connect sys_connect
+43 common accept sys_accept
+44 common sendto sys_sendto
+45 64 recvfrom sys_recvfrom
+46 64 sendmsg sys_sendmsg
+47 64 recvmsg sys_recvmsg
+48 common shutdown sys_shutdown
+49 common bind sys_bind
+50 common listen sys_listen
+51 common getsockname sys_getsockname
+52 common getpeername sys_getpeername
+53 common socketpair sys_socketpair
+54 64 setsockopt sys_setsockopt
+55 64 getsockopt sys_getsockopt
+56 common clone sys_clone
+57 common fork sys_fork
+58 common vfork sys_vfork
+59 64 execve sys_execve
+60 common exit sys_exit
+61 common wait4 sys_wait4
+62 common kill sys_kill
+63 common uname sys_newuname
+64 common semget sys_semget
+65 common semop sys_semop
+66 common semctl sys_semctl
+67 common shmdt sys_shmdt
+68 common msgget sys_msgget
+69 common msgsnd sys_msgsnd
+70 common msgrcv sys_msgrcv
+71 common msgctl sys_msgctl
+72 common fcntl sys_fcntl
+73 common flock sys_flock
+74 common fsync sys_fsync
+75 common fdatasync sys_fdatasync
+76 common truncate sys_truncate
+77 common ftruncate sys_ftruncate
+78 common getdents sys_getdents
+79 common getcwd sys_getcwd
+80 common chdir sys_chdir
+81 common fchdir sys_fchdir
+82 common rename sys_rename
+83 common mkdir sys_mkdir
+84 common rmdir sys_rmdir
+85 common creat sys_creat
+86 common link sys_link
+87 common unlink sys_unlink
+88 common symlink sys_symlink
+89 common readlink sys_readlink
+90 common chmod sys_chmod
+91 common fchmod sys_fchmod
+92 common chown sys_chown
+93 common fchown sys_fchown
+94 common lchown sys_lchown
+95 common umask sys_umask
+96 common gettimeofday sys_gettimeofday
+97 common getrlimit sys_getrlimit
+98 common getrusage sys_getrusage
+99 common sysinfo sys_sysinfo
+100 common times sys_times
+101 64 ptrace sys_ptrace
+102 common getuid sys_getuid
+103 common syslog sys_syslog
+104 common getgid sys_getgid
+105 common setuid sys_setuid
+106 common setgid sys_setgid
+107 common geteuid sys_geteuid
+108 common getegid sys_getegid
+109 common setpgid sys_setpgid
+110 common getppid sys_getppid
+111 common getpgrp sys_getpgrp
+112 common setsid sys_setsid
+113 common setreuid sys_setreuid
+114 common setregid sys_setregid
+115 common getgroups sys_getgroups
+116 common setgroups sys_setgroups
+117 common setresuid sys_setresuid
+118 common getresuid sys_getresuid
+119 common setresgid sys_setresgid
+120 common getresgid sys_getresgid
+121 common getpgid sys_getpgid
+122 common setfsuid sys_setfsuid
+123 common setfsgid sys_setfsgid
+124 common getsid sys_getsid
+125 common capget sys_capget
+126 common capset sys_capset
+127 64 rt_sigpending sys_rt_sigpending
+128 64 rt_sigtimedwait sys_rt_sigtimedwait
+129 64 rt_sigqueueinfo sys_rt_sigqueueinfo
+130 common rt_sigsuspend sys_rt_sigsuspend
+131 64 sigaltstack sys_sigaltstack
+132 common utime sys_utime
+133 common mknod sys_mknod
134 64 uselib
-135 common personality __x64_sys_personality
-136 common ustat __x64_sys_ustat
-137 common statfs __x64_sys_statfs
-138 common fstatfs __x64_sys_fstatfs
-139 common sysfs __x64_sys_sysfs
-140 common getpriority __x64_sys_getpriority
-141 common setpriority __x64_sys_setpriority
-142 common sched_setparam __x64_sys_sched_setparam
-143 common sched_getparam __x64_sys_sched_getparam
-144 common sched_setscheduler __x64_sys_sched_setscheduler
-145 common sched_getscheduler __x64_sys_sched_getscheduler
-146 common sched_get_priority_max __x64_sys_sched_get_priority_max
-147 common sched_get_priority_min __x64_sys_sched_get_priority_min
-148 common sched_rr_get_interval __x64_sys_sched_rr_get_interval
-149 common mlock __x64_sys_mlock
-150 common munlock __x64_sys_munlock
-151 common mlockall __x64_sys_mlockall
-152 common munlockall __x64_sys_munlockall
-153 common vhangup __x64_sys_vhangup
-154 common modify_ldt __x64_sys_modify_ldt
-155 common pivot_root __x64_sys_pivot_root
-156 64 _sysctl __x64_sys_sysctl
-157 common prctl __x64_sys_prctl
-158 common arch_prctl __x64_sys_arch_prctl
-159 common adjtimex __x64_sys_adjtimex
-160 common setrlimit __x64_sys_setrlimit
-161 common chroot __x64_sys_chroot
-162 common sync __x64_sys_sync
-163 common acct __x64_sys_acct
-164 common settimeofday __x64_sys_settimeofday
-165 common mount __x64_sys_mount
-166 common umount2 __x64_sys_umount
-167 common swapon __x64_sys_swapon
-168 common swapoff __x64_sys_swapoff
-169 common reboot __x64_sys_reboot
-170 common sethostname __x64_sys_sethostname
-171 common setdomainname __x64_sys_setdomainname
-172 common iopl __x64_sys_iopl/ptregs
-173 common ioperm __x64_sys_ioperm
+135 common personality sys_personality
+136 common ustat sys_ustat
+137 common statfs sys_statfs
+138 common fstatfs sys_fstatfs
+139 common sysfs sys_sysfs
+140 common getpriority sys_getpriority
+141 common setpriority sys_setpriority
+142 common sched_setparam sys_sched_setparam
+143 common sched_getparam sys_sched_getparam
+144 common sched_setscheduler sys_sched_setscheduler
+145 common sched_getscheduler sys_sched_getscheduler
+146 common sched_get_priority_max sys_sched_get_priority_max
+147 common sched_get_priority_min sys_sched_get_priority_min
+148 common sched_rr_get_interval sys_sched_rr_get_interval
+149 common mlock sys_mlock
+150 common munlock sys_munlock
+151 common mlockall sys_mlockall
+152 common munlockall sys_munlockall
+153 common vhangup sys_vhangup
+154 common modify_ldt sys_modify_ldt
+155 common pivot_root sys_pivot_root
+156 64 _sysctl sys_sysctl
+157 common prctl sys_prctl
+158 common arch_prctl sys_arch_prctl
+159 common adjtimex sys_adjtimex
+160 common setrlimit sys_setrlimit
+161 common chroot sys_chroot
+162 common sync sys_sync
+163 common acct sys_acct
+164 common settimeofday sys_settimeofday
+165 common mount sys_mount
+166 common umount2 sys_umount
+167 common swapon sys_swapon
+168 common swapoff sys_swapoff
+169 common reboot sys_reboot
+170 common sethostname sys_sethostname
+171 common setdomainname sys_setdomainname
+172 common iopl sys_iopl
+173 common ioperm sys_ioperm
174 64 create_module
-175 common init_module __x64_sys_init_module
-176 common delete_module __x64_sys_delete_module
+175 common init_module sys_init_module
+176 common delete_module sys_delete_module
177 64 get_kernel_syms
178 64 query_module
-179 common quotactl __x64_sys_quotactl
+179 common quotactl sys_quotactl
180 64 nfsservctl
181 common getpmsg
182 common putpmsg
183 common afs_syscall
184 common tuxcall
185 common security
-186 common gettid __x64_sys_gettid
-187 common readahead __x64_sys_readahead
-188 common setxattr __x64_sys_setxattr
-189 common lsetxattr __x64_sys_lsetxattr
-190 common fsetxattr __x64_sys_fsetxattr
-191 common getxattr __x64_sys_getxattr
-192 common lgetxattr __x64_sys_lgetxattr
-193 common fgetxattr __x64_sys_fgetxattr
-194 common listxattr __x64_sys_listxattr
-195 common llistxattr __x64_sys_llistxattr
-196 common flistxattr __x64_sys_flistxattr
-197 common removexattr __x64_sys_removexattr
-198 common lremovexattr __x64_sys_lremovexattr
-199 common fremovexattr __x64_sys_fremovexattr
-200 common tkill __x64_sys_tkill
-201 common time __x64_sys_time
-202 common futex __x64_sys_futex
-203 common sched_setaffinity __x64_sys_sched_setaffinity
-204 common sched_getaffinity __x64_sys_sched_getaffinity
+186 common gettid sys_gettid
+187 common readahead sys_readahead
+188 common setxattr sys_setxattr
+189 common lsetxattr sys_lsetxattr
+190 common fsetxattr sys_fsetxattr
+191 common getxattr sys_getxattr
+192 common lgetxattr sys_lgetxattr
+193 common fgetxattr sys_fgetxattr
+194 common listxattr sys_listxattr
+195 common llistxattr sys_llistxattr
+196 common flistxattr sys_flistxattr
+197 common removexattr sys_removexattr
+198 common lremovexattr sys_lremovexattr
+199 common fremovexattr sys_fremovexattr
+200 common tkill sys_tkill
+201 common time sys_time
+202 common futex sys_futex
+203 common sched_setaffinity sys_sched_setaffinity
+204 common sched_getaffinity sys_sched_getaffinity
205 64 set_thread_area
-206 64 io_setup __x64_sys_io_setup
-207 common io_destroy __x64_sys_io_destroy
-208 common io_getevents __x64_sys_io_getevents
-209 64 io_submit __x64_sys_io_submit
-210 common io_cancel __x64_sys_io_cancel
+206 64 io_setup sys_io_setup
+207 common io_destroy sys_io_destroy
+208 common io_getevents sys_io_getevents
+209 64 io_submit sys_io_submit
+210 common io_cancel sys_io_cancel
211 64 get_thread_area
-212 common lookup_dcookie __x64_sys_lookup_dcookie
-213 common epoll_create __x64_sys_epoll_create
+212 common lookup_dcookie sys_lookup_dcookie
+213 common epoll_create sys_epoll_create
214 64 epoll_ctl_old
215 64 epoll_wait_old
-216 common remap_file_pages __x64_sys_remap_file_pages
-217 common getdents64 __x64_sys_getdents64
-218 common set_tid_address __x64_sys_set_tid_address
-219 common restart_syscall __x64_sys_restart_syscall
-220 common semtimedop __x64_sys_semtimedop
-221 common fadvise64 __x64_sys_fadvise64
-222 64 timer_create __x64_sys_timer_create
-223 common timer_settime __x64_sys_timer_settime
-224 common timer_gettime __x64_sys_timer_gettime
-225 common timer_getoverrun __x64_sys_timer_getoverrun
-226 common timer_delete __x64_sys_timer_delete
-227 common clock_settime __x64_sys_clock_settime
-228 common clock_gettime __x64_sys_clock_gettime
-229 common clock_getres __x64_sys_clock_getres
-230 common clock_nanosleep __x64_sys_clock_nanosleep
-231 common exit_group __x64_sys_exit_group
-232 common epoll_wait __x64_sys_epoll_wait
-233 common epoll_ctl __x64_sys_epoll_ctl
-234 common tgkill __x64_sys_tgkill
-235 common utimes __x64_sys_utimes
+216 common remap_file_pages sys_remap_file_pages
+217 common getdents64 sys_getdents64
+218 common set_tid_address sys_set_tid_address
+219 common restart_syscall sys_restart_syscall
+220 common semtimedop sys_semtimedop
+221 common fadvise64 sys_fadvise64
+222 64 timer_create sys_timer_create
+223 common timer_settime sys_timer_settime
+224 common timer_gettime sys_timer_gettime
+225 common timer_getoverrun sys_timer_getoverrun
+226 common timer_delete sys_timer_delete
+227 common clock_settime sys_clock_settime
+228 common clock_gettime sys_clock_gettime
+229 common clock_getres sys_clock_getres
+230 common clock_nanosleep sys_clock_nanosleep
+231 common exit_group sys_exit_group
+232 common epoll_wait sys_epoll_wait
+233 common epoll_ctl sys_epoll_ctl
+234 common tgkill sys_tgkill
+235 common utimes sys_utimes
236 64 vserver
-237 common mbind __x64_sys_mbind
-238 common set_mempolicy __x64_sys_set_mempolicy
-239 common get_mempolicy __x64_sys_get_mempolicy
-240 common mq_open __x64_sys_mq_open
-241 common mq_unlink __x64_sys_mq_unlink
-242 common mq_timedsend __x64_sys_mq_timedsend
-243 common mq_timedreceive __x64_sys_mq_timedreceive
-244 64 mq_notify __x64_sys_mq_notify
-245 common mq_getsetattr __x64_sys_mq_getsetattr
-246 64 kexec_load __x64_sys_kexec_load
-247 64 waitid __x64_sys_waitid
-248 common add_key __x64_sys_add_key
-249 common request_key __x64_sys_request_key
-250 common keyctl __x64_sys_keyctl
-251 common ioprio_set __x64_sys_ioprio_set
-252 common ioprio_get __x64_sys_ioprio_get
-253 common inotify_init __x64_sys_inotify_init
-254 common inotify_add_watch __x64_sys_inotify_add_watch
-255 common inotify_rm_watch __x64_sys_inotify_rm_watch
-256 common migrate_pages __x64_sys_migrate_pages
-257 common openat __x64_sys_openat
-258 common mkdirat __x64_sys_mkdirat
-259 common mknodat __x64_sys_mknodat
-260 common fchownat __x64_sys_fchownat
-261 common futimesat __x64_sys_futimesat
-262 common newfstatat __x64_sys_newfstatat
-263 common unlinkat __x64_sys_unlinkat
-264 common renameat __x64_sys_renameat
-265 common linkat __x64_sys_linkat
-266 common symlinkat __x64_sys_symlinkat
-267 common readlinkat __x64_sys_readlinkat
-268 common fchmodat __x64_sys_fchmodat
-269 common faccessat __x64_sys_faccessat
-270 common pselect6 __x64_sys_pselect6
-271 common ppoll __x64_sys_ppoll
-272 common unshare __x64_sys_unshare
-273 64 set_robust_list __x64_sys_set_robust_list
-274 64 get_robust_list __x64_sys_get_robust_list
-275 common splice __x64_sys_splice
-276 common tee __x64_sys_tee
-277 common sync_file_range __x64_sys_sync_file_range
-278 64 vmsplice __x64_sys_vmsplice
-279 64 move_pages __x64_sys_move_pages
-280 common utimensat __x64_sys_utimensat
-281 common epoll_pwait __x64_sys_epoll_pwait
-282 common signalfd __x64_sys_signalfd
-283 common timerfd_create __x64_sys_timerfd_create
-284 common eventfd __x64_sys_eventfd
-285 common fallocate __x64_sys_fallocate
-286 common timerfd_settime __x64_sys_timerfd_settime
-287 common timerfd_gettime __x64_sys_timerfd_gettime
-288 common accept4 __x64_sys_accept4
-289 common signalfd4 __x64_sys_signalfd4
-290 common eventfd2 __x64_sys_eventfd2
-291 common epoll_create1 __x64_sys_epoll_create1
-292 common dup3 __x64_sys_dup3
-293 common pipe2 __x64_sys_pipe2
-294 common inotify_init1 __x64_sys_inotify_init1
-295 64 preadv __x64_sys_preadv
-296 64 pwritev __x64_sys_pwritev
-297 64 rt_tgsigqueueinfo __x64_sys_rt_tgsigqueueinfo
-298 common perf_event_open __x64_sys_perf_event_open
-299 64 recvmmsg __x64_sys_recvmmsg
-300 common fanotify_init __x64_sys_fanotify_init
-301 common fanotify_mark __x64_sys_fanotify_mark
-302 common prlimit64 __x64_sys_prlimit64
-303 common name_to_handle_at __x64_sys_name_to_handle_at
-304 common open_by_handle_at __x64_sys_open_by_handle_at
-305 common clock_adjtime __x64_sys_clock_adjtime
-306 common syncfs __x64_sys_syncfs
-307 64 sendmmsg __x64_sys_sendmmsg
-308 common setns __x64_sys_setns
-309 common getcpu __x64_sys_getcpu
-310 64 process_vm_readv __x64_sys_process_vm_readv
-311 64 process_vm_writev __x64_sys_process_vm_writev
-312 common kcmp __x64_sys_kcmp
-313 common finit_module __x64_sys_finit_module
-314 common sched_setattr __x64_sys_sched_setattr
-315 common sched_getattr __x64_sys_sched_getattr
-316 common renameat2 __x64_sys_renameat2
-317 common seccomp __x64_sys_seccomp
-318 common getrandom __x64_sys_getrandom
-319 common memfd_create __x64_sys_memfd_create
-320 common kexec_file_load __x64_sys_kexec_file_load
-321 common bpf __x64_sys_bpf
-322 64 execveat __x64_sys_execveat/ptregs
-323 common userfaultfd __x64_sys_userfaultfd
-324 common membarrier __x64_sys_membarrier
-325 common mlock2 __x64_sys_mlock2
-326 common copy_file_range __x64_sys_copy_file_range
-327 64 preadv2 __x64_sys_preadv2
-328 64 pwritev2 __x64_sys_pwritev2
-329 common pkey_mprotect __x64_sys_pkey_mprotect
-330 common pkey_alloc __x64_sys_pkey_alloc
-331 common pkey_free __x64_sys_pkey_free
-332 common statx __x64_sys_statx
-333 common io_pgetevents __x64_sys_io_pgetevents
-334 common rseq __x64_sys_rseq
+237 common mbind sys_mbind
+238 common set_mempolicy sys_set_mempolicy
+239 common get_mempolicy sys_get_mempolicy
+240 common mq_open sys_mq_open
+241 common mq_unlink sys_mq_unlink
+242 common mq_timedsend sys_mq_timedsend
+243 common mq_timedreceive sys_mq_timedreceive
+244 64 mq_notify sys_mq_notify
+245 common mq_getsetattr sys_mq_getsetattr
+246 64 kexec_load sys_kexec_load
+247 64 waitid sys_waitid
+248 common add_key sys_add_key
+249 common request_key sys_request_key
+250 common keyctl sys_keyctl
+251 common ioprio_set sys_ioprio_set
+252 common ioprio_get sys_ioprio_get
+253 common inotify_init sys_inotify_init
+254 common inotify_add_watch sys_inotify_add_watch
+255 common inotify_rm_watch sys_inotify_rm_watch
+256 common migrate_pages sys_migrate_pages
+257 common openat sys_openat
+258 common mkdirat sys_mkdirat
+259 common mknodat sys_mknodat
+260 common fchownat sys_fchownat
+261 common futimesat sys_futimesat
+262 common newfstatat sys_newfstatat
+263 common unlinkat sys_unlinkat
+264 common renameat sys_renameat
+265 common linkat sys_linkat
+266 common symlinkat sys_symlinkat
+267 common readlinkat sys_readlinkat
+268 common fchmodat sys_fchmodat
+269 common faccessat sys_faccessat
+270 common pselect6 sys_pselect6
+271 common ppoll sys_ppoll
+272 common unshare sys_unshare
+273 64 set_robust_list sys_set_robust_list
+274 64 get_robust_list sys_get_robust_list
+275 common splice sys_splice
+276 common tee sys_tee
+277 common sync_file_range sys_sync_file_range
+278 64 vmsplice sys_vmsplice
+279 64 move_pages sys_move_pages
+280 common utimensat sys_utimensat
+281 common epoll_pwait sys_epoll_pwait
+282 common signalfd sys_signalfd
+283 common timerfd_create sys_timerfd_create
+284 common eventfd sys_eventfd
+285 common fallocate sys_fallocate
+286 common timerfd_settime sys_timerfd_settime
+287 common timerfd_gettime sys_timerfd_gettime
+288 common accept4 sys_accept4
+289 common signalfd4 sys_signalfd4
+290 common eventfd2 sys_eventfd2
+291 common epoll_create1 sys_epoll_create1
+292 common dup3 sys_dup3
+293 common pipe2 sys_pipe2
+294 common inotify_init1 sys_inotify_init1
+295 64 preadv sys_preadv
+296 64 pwritev sys_pwritev
+297 64 rt_tgsigqueueinfo sys_rt_tgsigqueueinfo
+298 common perf_event_open sys_perf_event_open
+299 64 recvmmsg sys_recvmmsg
+300 common fanotify_init sys_fanotify_init
+301 common fanotify_mark sys_fanotify_mark
+302 common prlimit64 sys_prlimit64
+303 common name_to_handle_at sys_name_to_handle_at
+304 common open_by_handle_at sys_open_by_handle_at
+305 common clock_adjtime sys_clock_adjtime
+306 common syncfs sys_syncfs
+307 64 sendmmsg sys_sendmmsg
+308 common setns sys_setns
+309 common getcpu sys_getcpu
+310 64 process_vm_readv sys_process_vm_readv
+311 64 process_vm_writev sys_process_vm_writev
+312 common kcmp sys_kcmp
+313 common finit_module sys_finit_module
+314 common sched_setattr sys_sched_setattr
+315 common sched_getattr sys_sched_getattr
+316 common renameat2 sys_renameat2
+317 common seccomp sys_seccomp
+318 common getrandom sys_getrandom
+319 common memfd_create sys_memfd_create
+320 common kexec_file_load sys_kexec_file_load
+321 common bpf sys_bpf
+322 64 execveat sys_execveat
+323 common userfaultfd sys_userfaultfd
+324 common membarrier sys_membarrier
+325 common mlock2 sys_mlock2
+326 common copy_file_range sys_copy_file_range
+327 64 preadv2 sys_preadv2
+328 64 pwritev2 sys_pwritev2
+329 common pkey_mprotect sys_pkey_mprotect
+330 common pkey_alloc sys_pkey_alloc
+331 common pkey_free sys_pkey_free
+332 common statx sys_statx
+333 common io_pgetevents sys_io_pgetevents
+334 common rseq sys_rseq
# don't use numbers 387 through 423, add new calls after the last
# 'common' entry
-424 common pidfd_send_signal __x64_sys_pidfd_send_signal
-425 common io_uring_setup __x64_sys_io_uring_setup
-426 common io_uring_enter __x64_sys_io_uring_enter
-427 common io_uring_register __x64_sys_io_uring_register
-428 common open_tree __x64_sys_open_tree
-429 common move_mount __x64_sys_move_mount
-430 common fsopen __x64_sys_fsopen
-431 common fsconfig __x64_sys_fsconfig
-432 common fsmount __x64_sys_fsmount
-433 common fspick __x64_sys_fspick
-434 common pidfd_open __x64_sys_pidfd_open
-435 common clone3 __x64_sys_clone3/ptregs
-437 common openat2 __x64_sys_openat2
-438 common pidfd_getfd __x64_sys_pidfd_getfd
+424 common pidfd_send_signal sys_pidfd_send_signal
+425 common io_uring_setup sys_io_uring_setup
+426 common io_uring_enter sys_io_uring_enter
+427 common io_uring_register sys_io_uring_register
+428 common open_tree sys_open_tree
+429 common move_mount sys_move_mount
+430 common fsopen sys_fsopen
+431 common fsconfig sys_fsconfig
+432 common fsmount sys_fsmount
+433 common fspick sys_fspick
+434 common pidfd_open sys_pidfd_open
+435 common clone3 sys_clone3
+437 common openat2 sys_openat2
+438 common pidfd_getfd sys_pidfd_getfd
#
# x32-specific system call numbers start at 512 to avoid cache impact
# on-the-fly for compat_sys_*() compatibility system calls if X86_X32
# is defined.
#
-512 x32 rt_sigaction __x32_compat_sys_rt_sigaction
-513 x32 rt_sigreturn sys32_x32_rt_sigreturn
-514 x32 ioctl __x32_compat_sys_ioctl
-515 x32 readv __x32_compat_sys_readv
-516 x32 writev __x32_compat_sys_writev
-517 x32 recvfrom __x32_compat_sys_recvfrom
-518 x32 sendmsg __x32_compat_sys_sendmsg
-519 x32 recvmsg __x32_compat_sys_recvmsg
-520 x32 execve __x32_compat_sys_execve/ptregs
-521 x32 ptrace __x32_compat_sys_ptrace
-522 x32 rt_sigpending __x32_compat_sys_rt_sigpending
-523 x32 rt_sigtimedwait __x32_compat_sys_rt_sigtimedwait_time64
-524 x32 rt_sigqueueinfo __x32_compat_sys_rt_sigqueueinfo
-525 x32 sigaltstack __x32_compat_sys_sigaltstack
-526 x32 timer_create __x32_compat_sys_timer_create
-527 x32 mq_notify __x32_compat_sys_mq_notify
-528 x32 kexec_load __x32_compat_sys_kexec_load
-529 x32 waitid __x32_compat_sys_waitid
-530 x32 set_robust_list __x32_compat_sys_set_robust_list
-531 x32 get_robust_list __x32_compat_sys_get_robust_list
-532 x32 vmsplice __x32_compat_sys_vmsplice
-533 x32 move_pages __x32_compat_sys_move_pages
-534 x32 preadv __x32_compat_sys_preadv64
-535 x32 pwritev __x32_compat_sys_pwritev64
-536 x32 rt_tgsigqueueinfo __x32_compat_sys_rt_tgsigqueueinfo
-537 x32 recvmmsg __x32_compat_sys_recvmmsg_time64
-538 x32 sendmmsg __x32_compat_sys_sendmmsg
-539 x32 process_vm_readv __x32_compat_sys_process_vm_readv
-540 x32 process_vm_writev __x32_compat_sys_process_vm_writev
-541 x32 setsockopt __x32_compat_sys_setsockopt
-542 x32 getsockopt __x32_compat_sys_getsockopt
-543 x32 io_setup __x32_compat_sys_io_setup
-544 x32 io_submit __x32_compat_sys_io_submit
-545 x32 execveat __x32_compat_sys_execveat/ptregs
-546 x32 preadv2 __x32_compat_sys_preadv64v2
-547 x32 pwritev2 __x32_compat_sys_pwritev64v2
+512 x32 rt_sigaction compat_sys_rt_sigaction
+513 x32 rt_sigreturn compat_sys_x32_rt_sigreturn
+514 x32 ioctl compat_sys_ioctl
+515 x32 readv compat_sys_readv
+516 x32 writev compat_sys_writev
+517 x32 recvfrom compat_sys_recvfrom
+518 x32 sendmsg compat_sys_sendmsg
+519 x32 recvmsg compat_sys_recvmsg
+520 x32 execve compat_sys_execve
+521 x32 ptrace compat_sys_ptrace
+522 x32 rt_sigpending compat_sys_rt_sigpending
+523 x32 rt_sigtimedwait compat_sys_rt_sigtimedwait_time64
+524 x32 rt_sigqueueinfo compat_sys_rt_sigqueueinfo
+525 x32 sigaltstack compat_sys_sigaltstack
+526 x32 timer_create compat_sys_timer_create
+527 x32 mq_notify compat_sys_mq_notify
+528 x32 kexec_load compat_sys_kexec_load
+529 x32 waitid compat_sys_waitid
+530 x32 set_robust_list compat_sys_set_robust_list
+531 x32 get_robust_list compat_sys_get_robust_list
+532 x32 vmsplice compat_sys_vmsplice
+533 x32 move_pages compat_sys_move_pages
+534 x32 preadv compat_sys_preadv64
+535 x32 pwritev compat_sys_pwritev64
+536 x32 rt_tgsigqueueinfo compat_sys_rt_tgsigqueueinfo
+537 x32 recvmmsg compat_sys_recvmmsg_time64
+538 x32 sendmmsg compat_sys_sendmmsg
+539 x32 process_vm_readv compat_sys_process_vm_readv
+540 x32 process_vm_writev compat_sys_process_vm_writev
+541 x32 setsockopt compat_sys_setsockopt
+542 x32 getsockopt compat_sys_getsockopt
+543 x32 io_setup compat_sys_io_setup
+544 x32 io_submit compat_sys_io_submit
+545 x32 execveat compat_sys_execveat
+546 x32 preadv2 compat_sys_preadv64v2
+547 x32 pwritev2 compat_sys_pwritev64v2
include/uapi/linux/vhost.h
include/uapi/sound/asound.h
include/linux/bits.h
+include/vdso/bits.h
include/linux/const.h
+include/vdso/const.h
include/linux/hash.h
include/uapi/linux/hw_breakpoint.h
arch/x86/include/asm/disabled-features.h
check arch/x86/lib/memset_64.S '-I "^EXPORT_SYMBOL" -I "^#include <asm/export.h>" -I"^SYM_FUNC_START\(_LOCAL\)*(memset_\(erms\|orig\))"'
check include/uapi/asm-generic/mman.h '-I "^#include <\(uapi/\)*asm-generic/mman-common\(-tools\)*.h>"'
check include/uapi/linux/mman.h '-I "^#include <\(uapi/\)*asm/mman.h>"'
+check include/linux/build_bug.h '-I "^#\(ifndef\|endif\)\( \/\/\)* static_assert$"'
check include/linux/ctype.h '-I "isdigit("'
check lib/ctype.c '-I "^EXPORT_SYMBOL" -I "^#include <linux/export.h>" -B'
check arch/x86/include/asm/inat.h '-I "^#include [\"<]\(asm/\)*inat_types.h[\">]"'
P_FLAG(NEWNET);
P_FLAG(IO);
P_FLAG(CLEAR_SIGHAND);
+ P_FLAG(INTO_CGROUP);
#undef P_FLAG
if (flags)
P_MREMAP_FLAG(MAYMOVE);
P_MREMAP_FLAG(FIXED);
+ P_MREMAP_FLAG(DONTUNMAP);
#undef P_MREMAP_FLAG
if (flags)
vars[var] = sub("-fstack-clash-protection", "", vars[var])
if not clang_has_option("-fstack-protector-strong"):
vars[var] = sub("-fstack-protector-strong", "", vars[var])
+ if not clang_has_option("-fno-semantic-interposition"):
+ vars[var] = sub("-fno-semantic-interposition", "", vars[var])
from distutils.core import setup, Extension
out->force_header ?
(metric_name ? metric_name : name) : "", 0);
}
- } else
- print_metric(config, ctxp, NULL, NULL, "", 0);
+ } else {
+ print_metric(config, ctxp, NULL, NULL,
+ out->force_header ?
+ (metric_name ? metric_name : name) : "", 0);
+ }
for (i = 1; i < pctx.num_ids; i++)
zfree(&pctx.ids[i].name);
if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph/config ] ; then \
rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph/config; \
fi;
+ rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/__pycache__/*
+ if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph/__pycache__ ] ; then \
+ rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph/__pycache__; \
+ fi;
rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/*
if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph ] ; then \
rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph; \
- p m - g r a p h
+ _
+ _ __ _ __ ___ __ _ _ __ __ _ _ __ | |__
+ | '_ \| '_ ` _ \ _____ / _` | '__/ _` | '_ \| '_ \
+ | |_) | | | | | |_____| (_| | | | (_| | |_) | | | |
+ | .__/|_| |_| |_| \__, |_| \__,_| .__/|_| |_|
+ |_| |___/ |_|
pm-graph: suspend/resume/boot timing analysis tools
- Version: 5.5
+ Version: 5.6
Author: Todd Brandt <todd.e.brandt@intel.com>
Home Page: https://01.org/pm-graph
- upstream version in git:
https://github.com/intel/pm-graph/
- Requirements:
- - runs with python2 or python3, choice is made by /usr/bin/python link
- - python2 now requires python-configparser be installed
-
Table of Contents
- Overview
- Setup
- Basic Usage
- Dev Mode Usage
- Proc Mode Usage
+ - Endurance Testing
+ - Usage Examples
- Configuration Files
- Usage Examples
- Config File Options
| SETUP |
------------------------------------------------------------------
- These packages are required to execute the scripts
+ Package Requirements
+ - runs with python2 or python3, choice is made by /usr/bin/python link
- python
- - python-requests
+ - python-configparser (for python2 sleepgraph)
+ - python-requests (for googlesheet.py)
+ - linux-tools-common (for turbostat usage in sleepgraph)
Ubuntu:
- sudo apt-get install python python-requests
+ sudo apt-get install python python-configparser python-requests linux-tools-common
Fedora:
- sudo dnf install python python-requests
+ sudo dnf install python python-configparser python-requests linux-tools-common
The tools can most easily be installed via git clone and make install
%> sudo ./sleepgraph.py -config config/suspend-proc.cfg
+------------------------------------------------------------------
+| ENDURANCE TESTING |
+------------------------------------------------------------------
+
+ The best way to gauge the health of a system is to run a series of
+ suspend/resumes over an extended period and analyze the behavior. This can be
+ accomplished with sleepgraph's -multi argument. You specify two numbers: the
+ number of tests to run OR the duration in days, hours, or minutes, and the
+ delay in seconds between them. For instance, -multi 20 5: execute 20 tests with
+ a 5 second delay between each, or -multi 24h 0: execute tests over a 24 hour
+ period with no delay between tests. You can include any other options you like
+ to generate the data you want. It's most useful to collect dev mode timelines
+ as the kprobes don't alter the performance much and you get more insight.
+
+ On completion, the output folder contains a series of folders for the
+ individual test data and a set of summary pages in the root. The summary.html
+ file is a tabular list of the tests with relevant info and links. The
+ summary-issue.html and summary-devices.html files include data taken from
+ all tests on kernel issues and device performance. The folder looks like this:
+
+ suspend-xN-{date}-{time}:
+ summary.html
+ summary-issues.html
+ summary-devices.html
+ suspend-{date}-{time} (1)
+ suspend-{date}-{time} (2)
+ ...
+
+ These are the relevant arguments to use for testing:
+
+ -m mode
+ Mode to initiate for suspend e.g. mem, freeze, standby (default: mem).
+
+ -rtcwake t
+ Use rtcwake to autoresume after t seconds (default: 15).
+
+ -gzip (optional)
+ Gzip the trace and dmesg logs to save space. The tool can also read in
+ gzipped logs for processing. This reduces the multitest folder size.
+
+ -dev (optional)
+ Add kernel source calls and threads to the timeline (default: disabled).
+
+ -multi n d
+ Execute n consecutive tests at d seconds intervals. The outputs will be
+ created in a new subdirectory: suspend-xN-{date}-{time}. When the multitest
+ run is done, the -summary command is called automatically to create summary
+ html files for all the data (unless you use -skiphtml). -skiphtml will
+ speed up the testing by not creating timelines or summary html files. You
+ can then run the tool again at a later time with -summary and -genhtml to
+ create the timelines.
+
+ -skiphtml (optional)
+ Run the test and capture the trace logs, but skip the timeline and summary
+ html generation. This can greatly speed up overall testing. You can then
+ copy the data to a faster host machine and run -summary -genhtml to
+ generate the timelines and summary.
+
+ These are the relevant commands to use after testing is complete:
+
+ -summary indir
+ Generate or regenerate the summary for a -multi test run. Creates three
+ files: summary.html, summary-issues.html, and summary-devices.html in the
+ current folder. summary.html is a table of tests with relevant info sorted
+ by kernel/host/mode, and links to the test html files. summary-issues.html
+ is a list of kernel issues found in dmesg from all the tests.
+ summary-devices.html is a list of devices and times from all the tests.
+
+ -genhtml
+ Used with -summary to regenerate any missing html timelines from their
+ dmesg and ftrace logs. This will require a significant amount of time if
+ there are thousands of tests.
+
+Usage Examples
+_______________
+
+ A multitest is initiated like this:
+
+ %> sudo ./sleepgraph.py -m mem -rtcwake 10 -dev -gzip -multi 2000 0
+
+ or you can skip timeline generation in order to speed things up
+
+ %> sudo ./sleepgraph.py -m mem -rtcwake 10 -dev -gzip -multi 2000 0 -skiphtml
+
+ The tool will produce an output folder with all the test subfolders inside.
+ Each test subfolder contains the dmesg/ftrace logs and/or the html timeline
+ depending on whether you used the -skiphtml option. The root folder contains
+ the summary.html files.
+
+ The summary for an existing multitest is generated like this:
+
+ %> cd suspend-x2000-{date}-{time}
+ %> sleepgraph.py -summary .
+
+ or if you need to generate the html timelines you can use -genhtml
+
+ %> cd suspend-xN-{date}-{time}
+ %> sleepgraph.py -summary . -genhtml
------------------------------------------------------------------
| CONFIGURATION FILES |
-#!/usr/bin/python
+#!/usr/bin/env python3
# SPDX-License-Identifier: GPL-2.0-only
#
# Tool for analyzing boot timing
Switch the display to the requested mode for the test using the xset command.
This helps maintain the consistency of test data for better comparison.
.TP
-\fB-skiphtml\fR
-Run the test and capture the trace logs, but skip the timeline generation.
+\fB-wifi\fR
+If a wifi connection is available, check that it reconnects after resume. Include
+the reconnect time in the total resume time calculation and treat wifi timeouts
+as resume failures.
.SS "advanced"
.TP
Include \fIt\fR ms delay after last resume (default: 0 ms).
.TP
\fB-multi \fIn d\fR
-Execute \fIn\fR consecutive tests at \fId\fR seconds intervals. The outputs will
-be created in a new subdirectory with a summary page: suspend-xN-{date}-{time}.
+Used for endurance testing. If \fIn\fR is entirely numeric, it's treated as a count:
+Execute \fIn\fR consecutive tests at \fId\fR second intervals.
+If \fIn\fR is an integer followed by a "d", "h", or "m", it's treated as a duration:
+Execute tests continuously over \fIn\fR days, hours, or minutes at \fId\fR second intervals.
+The outputs will be created in a new subdirectory, for count: suspend-{date}-{time}-xN,
+for duration: suspend-{date}-{time}-Nm. When the multitest run is done, the \fI-summary\fR
+command is called automatically to create summary html files for all the data (unless you
+use \fI-skiphtml\fR). \fI-skiphtml\fR will speed up the testing by not creating timelines
+or summary html files. You can then run the tool again at a later time with \fI-summary\fR
+and \fI-genhtml\fR to create the timelines.
+.TP
+\fB-maxfail \fIn\fR
+Abort a -multi run after \fIn\fR consecutive fails. 0 means never abort (default = 0).
+.TP
+\fB-skiphtml\fR
+Run the test and capture the trace logs, but skip the timeline generation.
+You can generate the html timelines later with \fI-dmesg\fR & \fI-ftrace\fR, or
+by running \fI-summary\fR and \fI-genhtml\fR.
.SS "ftrace debug"
.TP
.SH COMMANDS
.TP
\fB-summary \fIindir\fR
-Create a summary page of all tests in \fIindir\fR. Creates summary.html
-in the current folder. The output page is a table of tests with
-suspend and resume values sorted by suspend mode, host, and kernel.
-Includes test averages by mode and links to the test html files.
-Use -genhtml to include tests with missing html.
+Create a set of summary pages for all tests in \fIindir\fR recursively.
+Creates summary.html, summary-issues.html, and summary-devices.html in the current folder.
+summary.html is a table of tests with relevant info sorted by kernel/host/mode,
+and links to the test html files. It identifies the minimum, maximum, and median
+suspend and resume times for you with highlights and links in the header.
+summary-issues.html is a list of kernel issues found in dmesg from all the tests.
+summary-devices.html is a list of devices and times from all the tests.
+
+Use \fI-genhtml\fR to regenerate any tests with missing html.
+.TP
+\fB-genhtml\fR
+Used with \fI-summary\fR to regenerate any missing html timelines from their
+dmesg and ftrace logs. This will require a significant amount of time if there
+are thousands of tests.
.TP
\fB-modes\fR
List available suspend modes.
\fB-fpdt\fR
Print out the contents of the ACPI Firmware Performance Data Table.
.TP
-\fB-battery\fR
-Print out battery status and current charge.
-.TP
-\fB-wifi\fR
+\fB-wificheck\fR
Print out wifi status and connection details.
.TP
\fB-xon/-xoff/-xstandby/-xsuspend\fR
\fB-devinfo\fR
Print out the pm settings of all devices which support runtime suspend.
.TP
+\fB-cmdinfo\fR
+Print out all the platform data collected from the system that makes it into the logs.
+.TP
\fB-flist\fR
Print the list of ftrace functions currently being captured. Functions
that are not available as symbols in the current kernel are shown in red.
.IP
\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -x2 -predelay 500 -x2delay 500 -postdelay 500\fR
.PP
+Execute a suspend using a custom command.
+.IP
+\f(CW$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15\fR
+.PP
+
+.SS "endurance testing using -multi"
+.PP
Do a batch run of 10 freezes with 30 seconds delay between runs.
.IP
\f(CW$ sudo sleepgraph -m freeze -rtcwake 15 -multi 10 30\fR
.PP
-Execute a suspend using a custom command.
+Do a batch run of freezes for 24 hours.
.IP
-\f(CW$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15\fR
-.PP
+\f(CW$ sudo sleepgraph -m freeze -rtcwake 15 -multi 24h 0\fR
.SS "adding callgraph data"
Add device callgraphs. Limit the trace depth and only show callgraphs 10ms or larger.
-#!/usr/bin/python
+#!/usr/bin/env python3
# SPDX-License-Identifier: GPL-2.0-only
#
# Tool for analyzing suspend/resume timing
import platform
import signal
import codecs
-from datetime import datetime
+from datetime import datetime, timedelta
import struct
import configparser
import gzip
# store system values and test parameters
class SystemValues:
title = 'SleepGraph'
- version = '5.5'
+ version = '5.6'
ansi = False
rs = 0
display = ''
gzip = False
sync = False
+ wifi = False
verbose = False
testlog = True
dmesglog = True
cgphase = ''
cgtest = -1
cgskip = ''
- multitest = {'run': False, 'count': 0, 'delay': 0}
+ maxfail = 0
+ multitest = {'run': False, 'count': 1000000, 'delay': 0}
max_graph_depth = 0
callloopmaxgap = 0.0001
callloopmaxlen = 0.005
x2delay = 0
skiphtml = False
usecallgraph = False
- ftopfunc = 'suspend_devices_and_enter'
+ ftopfunc = 'pm_suspend'
ftop = False
usetraceevents = False
usetracemarkers = True
predelay = 0
postdelay = 0
pmdebug = ''
+ tmstart = 'SUSPEND START %Y%m%d-%H:%M:%S.%f'
+ tmend = 'RESUME COMPLETE %Y%m%d-%H:%M:%S.%f'
tracefuncs = {
'sys_sync': {},
'ksys_sync': {},
'acpi_s2idle_sync': {},
'acpi_s2idle_begin': {},
'acpi_s2idle_prepare': {},
+ 'acpi_s2idle_prepare_late': {},
'acpi_s2idle_wake': {},
'acpi_s2idle_wakeup': {},
'acpi_s2idle_restore': {},
+ 'acpi_s2idle_restore_early': {},
'hibernate_preallocate_memory': {},
'create_basic_memory_bitmaps': {},
'swsusp_write': {},
'intel_opregion_init': {},
'intel_fbdev_set_suspend': {},
}
+ infocmds = [
+ [0, 'kparams', 'cat', '/proc/cmdline'],
+ [0, 'mcelog', 'mcelog'],
+ [0, 'pcidevices', 'lspci', '-tv'],
+ [0, 'usbdevices', 'lsusb', '-t'],
+ [1, 'interrupts', 'cat', '/proc/interrupts'],
+ [1, 'wakeups', 'cat', '/sys/kernel/debug/wakeup_sources'],
+ [2, 'gpecounts', 'sh', '-c', 'grep -v invalid /sys/firmware/acpi/interrupts/*'],
+ [2, 'suspendstats', 'sh', '-c', 'grep -v invalid /sys/power/suspend_stats/*'],
+ [2, 'cpuidle', 'sh', '-c', 'grep -v invalid /sys/devices/system/cpu/cpu*/cpuidle/state*/s2idle/*'],
+ [2, 'battery', 'sh', '-c', 'grep -v invalid /sys/class/power_supply/*/*'],
+ ]
cgblacklist = []
kprobes = dict()
timeformat = '%.3f'
cmdline = '%s %s' % \
(os.path.basename(sys.argv[0]), ' '.join(sys.argv[1:]))
- kparams = ''
sudouser = ''
def __init__(self):
self.archargs = 'args_'+platform.machine()
if os.getuid() == 0 and 'SUDO_USER' in os.environ and \
os.environ['SUDO_USER']:
self.sudouser = os.environ['SUDO_USER']
+ def resetlog(self):
+ self.logmsg = ''
+ self.platinfo = []
def vprint(self, msg):
self.logmsg += msg+'\n'
if self.verbose or msg.startswith('WARNING:'):
return
signame = self.signames[signum] if signum in self.signames else 'UNKNOWN'
msg = 'Signal %s caused a tool exit, line %d' % (signame, frame.f_lineno)
- sysvals.outputResult({'error':msg})
+ self.outputResult({'error':msg})
sys.exit(3)
def signalHandlerInit(self):
capture = ['BUS', 'SYS', 'XCPU', 'XFSZ', 'PWR', 'HUP', 'INT', 'QUIT',
- 'ILL', 'ABRT', 'FPE', 'SEGV', 'TERM', 'TSTP']
+ 'ILL', 'ABRT', 'FPE', 'SEGV', 'TERM']
self.signames = dict()
for i in capture:
s = 'SIG'+i
self.outputResult({'error':msg})
sys.exit(1)
return False
+ def usable(self, file):
+ return (os.path.exists(file) and os.path.getsize(file) > 0)
def getExec(self, cmd):
try:
fp = Popen(['which', cmd], stdout=PIPE, stderr=PIPE).stdout
r = info['bios-release-date'] if 'bios-release-date' in info else ''
self.sysstamp = '# sysinfo | man:%s | plat:%s | cpu:%s | bios:%s | biosdate:%s | numcpu:%d | memsz:%d | memfr:%d' % \
(m, p, c, b, r, self.cpucount, self.memtotal, self.memfree)
- try:
- kcmd = open('/proc/cmdline', 'r').read().strip()
- except:
- kcmd = ''
- if kcmd:
- self.sysstamp += '\n# kparams | %s' % kcmd
def printSystemInfo(self, fatal=False):
self.rootCheck(True)
out = dmidecode(self.mempath, fatal)
self.testdir+'/'+self.prefix+'_'+self.suspendmode+'.html'
if not os.path.isdir(self.testdir):
os.makedirs(self.testdir)
+ self.sudoUserchown(self.testdir)
def getValueList(self, value):
out = []
for i in value.split(','):
fp.close()
self.dmesgstart = float(ktime)
def getdmesg(self, testdata):
- op = self.writeDatafileHeader(sysvals.dmesgfile, testdata)
+ op = self.writeDatafileHeader(self.dmesgfile, testdata)
# store all new dmesg lines since initdmesg was called
fp = Popen('dmesg', stdout=PIPE).stdout
for line in fp:
if name == f:
return True
return False
- def initFtrace(self):
- self.printSystemInfo(False)
- pprint('INITIALIZING FTRACE...')
+ def initFtrace(self, quiet=False):
+ if not quiet:
+ sysvals.printSystemInfo(False)
+ pprint('INITIALIZING FTRACE...')
# turn trace off
self.fsetVal('0', 'tracing_on')
self.cleanupFtrace()
if tgtsize < 65536:
tgtsize = int(self.fgetVal('buffer_size_kb')) * cpus
break
- pprint('Setting trace buffers to %d kB (%d kB per cpu)' % (tgtsize, tgtsize/cpus))
+ self.vprint('Setting trace buffers to %d kB (%d kB per cpu)' % (tgtsize, tgtsize/cpus))
# initialize the callgraph trace
if(self.usecallgraph):
# set trace type
if self.usedevsrc:
for name in self.dev_tracefuncs:
self.defaultKprobe(name, self.dev_tracefuncs[name])
- pprint('INITIALIZING KPROBES...')
+ if not quiet:
+ pprint('INITIALIZING KPROBES...')
self.addKprobes(self.verbose)
if(self.usetraceevents):
# turn trace events on
fw = test['fw']
if(fw):
fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1]))
- if 'mcelog' in test:
- fp.write('# mcelog %s\n' % test['mcelog'])
if 'turbo' in test:
fp.write('# turbostat %s\n' % test['turbo'])
- if 'bat' in test:
- (a1, c1), (a2, c2) = test['bat']
- fp.write('# battery %s %d %s %d\n' % (a1, c1, a2, c2))
if 'wifi' in test:
- wstr = []
- for wifi in test['wifi']:
- tmp = []
- for key in sorted(wifi):
- tmp.append('%s:%s' % (key, wifi[key]))
- wstr.append('|'.join(tmp))
- fp.write('# wifi %s\n' % (','.join(wstr)))
+ fp.write('# wifi %s\n' % test['wifi'])
if test['error'] or len(testdata) > 1:
fp.write('# enter_sleep_error %s\n' % test['error'])
return fp
def b64zip(self, data):
out = base64.b64encode(codecs.encode(data.encode(), 'zlib')).decode()
return out
- def mcelog(self, clear=False):
- cmd = self.getExec('mcelog')
- if not cmd:
- return ''
- if clear:
- call(cmd+' > /dev/null 2>&1', shell=True)
- return ''
- try:
- fp = Popen([cmd], stdout=PIPE, stderr=PIPE).stdout
- out = ascii(fp.read()).strip()
- fp.close()
- except:
- return ''
- if not out:
- return ''
- return self.b64zip(out)
- def platforminfo(self):
+ def platforminfo(self, cmdafter):
# add platform info on to a completed ftrace file
if not os.path.exists(self.ftracefile):
return False
footer += '# platform-devinfo: %s\n' % self.b64zip(out)
# add a line for each of these commands with their outputs
- cmds = [
- ['pcidevices', 'lspci', '-tv'],
- ['interrupts', 'cat', '/proc/interrupts'],
- ['gpecounts', 'sh', '-c', 'grep -v invalid /sys/firmware/acpi/interrupts/gpe*'],
- ]
- for cargs in cmds:
- name = cargs[0]
- cmdline = ' '.join(cargs[1:])
- cmdpath = self.getExec(cargs[1])
- if not cmdpath:
+ for name, cmdline, info in cmdafter:
+ footer += '# platform-%s: %s | %s\n' % (name, cmdline, self.b64zip(info))
+
+ with self.openlog(self.ftracefile, 'a') as fp:
+ fp.write(footer)
+ return True
+ def commonPrefix(self, list):
+ if len(list) < 2:
+ return ''
+ prefix = list[0]
+ for s in list[1:]:
+ while s[:len(prefix)] != prefix and prefix:
+ prefix = prefix[:len(prefix)-1]
+ if not prefix:
+ break
+ if '/' in prefix and prefix[-1] != '/':
+ prefix = prefix[0:prefix.rfind('/')+1]
+ return prefix
+ def dictify(self, text, format):
+ out = dict()
+ header = True if format == 1 else False
+ delim = ' ' if format == 1 else ':'
+ for line in text.split('\n'):
+ if header:
+ header, out['@'] = False, line
+ continue
+ line = line.strip()
+ if delim in line:
+ data = line.split(delim, 1)
+ num = re.search(r'[\d]+', data[1])
+ if format == 2 and num:
+ out[data[0].strip()] = num.group()
+ else:
+ out[data[0].strip()] = data[1]
+ return out
+ def cmdinfo(self, begin, debug=False):
+ out = []
+ if begin:
+ self.cmd1 = dict()
+ for cargs in self.infocmds:
+ delta, name = cargs[0], cargs[1]
+ cmdline, cmdpath = ' '.join(cargs[2:]), self.getExec(cargs[2])
+ if not cmdpath or (begin and not delta):
continue
- cmd = [cmdpath] + cargs[2:]
try:
- fp = Popen(cmd, stdout=PIPE, stderr=PIPE).stdout
+ fp = Popen([cmdpath]+cargs[3:], stdout=PIPE, stderr=PIPE).stdout
info = ascii(fp.read()).strip()
fp.close()
except:
continue
- if not info:
- continue
- footer += '# platform-%s: %s | %s\n' % (name, cmdline, self.b64zip(info))
-
- with self.openlog(self.ftracefile, 'a') as fp:
- fp.write(footer)
- return True
+ if not debug and begin:
+ self.cmd1[name] = self.dictify(info, delta)
+ elif not debug and delta and name in self.cmd1:
+ before, after = self.cmd1[name], self.dictify(info, delta)
+ dinfo = ('\t%s\n' % before['@']) if '@' in before else ''
+ prefix = self.commonPrefix(list(before.keys()))
+ for key in sorted(before):
+ if key in after and before[key] != after[key]:
+ title = key.replace(prefix, '')
+ if delta == 2:
+ dinfo += '\t%s : %s -> %s\n' % \
+ (title, before[key].strip(), after[key].strip())
+ else:
+ dinfo += '%10s (start) : %s\n%10s (after) : %s\n' % \
+ (title, before[key], title, after[key])
+ dinfo = '\tnothing changed' if not dinfo else dinfo.rstrip()
+ out.append((name, cmdline, dinfo))
+ else:
+ out.append((name, cmdline, '\tnothing' if not info else info))
+ return out
def haveTurbostat(self):
if not self.tstat:
return False
fp = Popen([cmd, '-v'], stdout=PIPE, stderr=PIPE).stderr
out = ascii(fp.read()).strip()
fp.close()
- if re.match('turbostat version [0-9\.]* .*', out):
- sysvals.vprint(out)
+ if re.match('turbostat version .*', out):
+ self.vprint(out)
return True
return False
def turbostat(self):
fp.close()
if not keyline or not valline or len(keyline) != len(valline):
errmsg = 'unrecognized turbostat output:\n'+rawout.strip()
- sysvals.vprint(errmsg)
- if not sysvals.verbose:
+ self.vprint(errmsg)
+ if not self.verbose:
pprint(errmsg)
return ''
- if sysvals.verbose:
+ if self.verbose:
pprint(rawout.strip())
out = []
for key in keyline:
val = valline[idx]
out.append('%s=%s' % (key, val))
return '|'.join(out)
- def checkWifi(self):
- out = dict()
- iwcmd, ifcmd = self.getExec('iwconfig'), self.getExec('ifconfig')
- if not iwcmd or not ifcmd:
- return out
- fp = Popen(iwcmd, stdout=PIPE, stderr=PIPE).stdout
- for line in fp:
- m = re.match('(?P<dev>\S*) .* ESSID:(?P<ess>\S*)', ascii(line))
- if not m:
+ def wifiDetails(self, dev):
+ try:
+ info = open('/sys/class/net/%s/device/uevent' % dev, 'r').read().strip()
+ except:
+ return dev
+ vals = [dev]
+ for prop in info.split('\n'):
+ if prop.startswith('DRIVER=') or prop.startswith('PCI_ID='):
+ vals.append(prop.split('=')[-1])
+ return ':'.join(vals)
+ def checkWifi(self, dev=''):
+ try:
+ w = open('/proc/net/wireless', 'r').read().strip()
+ except:
+ return ''
+ for line in reversed(w.split('\n')):
+ m = re.match(' *(?P<dev>.*): (?P<stat>[0-9a-f]*) .*', w.split('\n')[-1])
+ if not m or (dev and dev != m.group('dev')):
continue
- out['device'] = m.group('dev')
- if '"' in m.group('ess'):
- out['essid'] = m.group('ess').strip('"')
- break
- fp.close()
- if 'device' in out:
- fp = Popen([ifcmd, out['device']], stdout=PIPE, stderr=PIPE).stdout
- for line in fp:
- m = re.match('.* inet (?P<ip>[0-9\.]*)', ascii(line))
- if m:
- out['ip'] = m.group('ip')
- break
- fp.close()
- return out
+ return m.group('dev')
+ return ''
+ def pollWifi(self, dev, timeout=60):
+ start = time.time()
+ while (time.time() - start) < timeout:
+ w = self.checkWifi(dev)
+ if w:
+ return '%s reconnected %.2f' % \
+ (self.wifiDetails(dev), max(0, time.time() - start))
+ time.sleep(0.01)
+ return '%s timeout %d' % (self.wifiDetails(dev), timeout)
def errorSummary(self, errinfo, msg):
found = False
for entry in errinfo:
arr[j] = arr[j]\
.replace('\\', '\\\\').replace(']', '\]').replace('[', '\[')\
.replace('.', '\.').replace('+', '\+').replace('*', '\*')\
- .replace('(', '\(').replace(')', '\)')
- mstr = ' '.join(arr)
+ .replace('(', '\(').replace(')', '\)').replace('}', '\}')\
+ .replace('{', '\{')
+ mstr = ' *'.join(arr)
entry = {
'line': msg,
'match': mstr,
'urls': {self.hostname: [self.htmlfile]}
}
errinfo.append(entry)
+ def multistat(self, start, idx, finish):
+ if 'time' in self.multitest:
+ id = '%d Duration=%dmin' % (idx+1, self.multitest['time'])
+ else:
+ id = '%d/%d' % (idx+1, self.multitest['count'])
+ t = time.time()
+ if 'start' not in self.multitest:
+ self.multitest['start'] = self.multitest['last'] = t
+ self.multitest['total'] = 0.0
+ pprint('TEST (%s) START' % id)
+ return
+ dt = t - self.multitest['last']
+ if not start:
+ if idx == 0 and self.multitest['delay'] > 0:
+ self.multitest['total'] += self.multitest['delay']
+ pprint('TEST (%s) COMPLETE -- Duration %.1fs' % (id, dt))
+ return
+ self.multitest['total'] += dt
+ self.multitest['last'] = t
+ avg = self.multitest['total'] / idx
+ if 'time' in self.multitest:
+ left = finish - datetime.now()
+ left -= timedelta(microseconds=left.microseconds)
+ else:
+ left = timedelta(seconds=((self.multitest['count'] - idx) * int(avg)))
+ pprint('TEST (%s) START - Avg Duration %.1fs, Time left %s' % \
+ (id, avg, str(left)))
+ def multiinit(self, c, d):
+ sz, unit = 'count', 'm'
+ if c.endswith('d') or c.endswith('h') or c.endswith('m'):
+ sz, unit, c = 'time', c[-1], c[:-1]
+ self.multitest['run'] = True
+ self.multitest[sz] = getArgInt('multi: n d (exec count)', c, 1, 1000000, False)
+ self.multitest['delay'] = getArgInt('multi: n d (delay between tests)', d, 0, 3600, False)
+ if unit == 'd':
+ self.multitest[sz] *= 1440
+ elif unit == 'h':
+ self.multitest[sz] *= 60
sysvals = SystemValues()
switchvalues = ['enable', 'disable', 'on', 'off', 'true', 'false', '1', '0']
'resume_complete': {'order': 9, 'color': '#FFFFCC'},
}
errlist = {
- 'HWERROR' : '.*\[ *Hardware Error *\].*',
- 'FWBUG' : '.*\[ *Firmware Bug *\].*',
- 'BUG' : '.*BUG.*',
- 'ERROR' : '.*ERROR.*',
- 'WARNING' : '.*WARNING.*',
- 'IRQ' : '.*genirq: .*',
- 'TASKFAIL': '.*Freezing of tasks *.*',
- 'ACPI' : '.*ACPI *(?P<b>[A-Za-z]*) *Error[: ].*',
- 'DEVFAIL' : '.* failed to (?P<b>[a-z]*) async: .*',
- 'DISKFULL': '.*No space left on device.*',
- 'USBERR' : '.*usb .*device .*, error [0-9-]*',
- 'ATAERR' : ' *ata[0-9\.]*: .*failed.*',
- 'MEIERR' : ' *mei.*: .*failed.*',
- 'TPMERR' : '(?i) *tpm *tpm[0-9]*: .*error.*',
+ 'HWERROR' : r'.*\[ *Hardware Error *\].*',
+ 'FWBUG' : r'.*\[ *Firmware Bug *\].*',
+ 'BUG' : r'(?i).*\bBUG\b.*',
+ 'ERROR' : r'(?i).*\bERROR\b.*',
+ 'WARNING' : r'(?i).*\bWARNING\b.*',
+ 'FAULT' : r'(?i).*\bFAULT\b.*',
+ 'FAIL' : r'(?i).*\bFAILED\b.*',
+ 'INVALID' : r'(?i).*\bINVALID\b.*',
+ 'CRASH' : r'(?i).*\bCRASHED\b.*',
+ 'IRQ' : r'.*\bgenirq: .*',
+ 'TASKFAIL': r'.*Freezing of tasks *.*',
+ 'ACPI' : r'.*\bACPI *(?P<b>[A-Za-z]*) *Error[: ].*',
+ 'DISKFULL': r'.*\bNo space left on device.*',
+ 'USBERR' : r'.*usb .*device .*, error [0-9-]*',
+ 'ATAERR' : r' *ata[0-9\.]*: .*failed.*',
+ 'MEIERR' : r' *mei.*: .*failed.*',
+ 'TPMERR' : r'(?i) *tpm *tpm[0-9]*: .*error.*',
}
def __init__(self, num):
idchar = 'abcdefghij'
self.start = 0.0 # test start
self.end = 0.0 # test end
+ self.hwstart = 0 # rtc test start
+ self.hwend = 0 # rtc test end
self.tSuspended = 0.0 # low-level suspend start
self.tResumed = 0.0 # low-level resume start
self.tKernSus = 0.0 # kernel level suspend start
self.stamp = 0
self.outfile = ''
self.kerror = False
- self.battery = 0
- self.wifi = 0
+ self.wifi = dict()
self.turbostat = 0
- self.mcelog = 0
self.enterfail = ''
self.currphase = ''
self.pstl = dict() # process timeline
continue
dir = 'suspend' if t < self.tSuspended else 'resume'
msg = m.group('msg')
+ if re.match('capability: warning: .*', msg):
+ continue
for err in self.errlist:
if re.match(self.errlist[err], msg):
list.append((msg, err, dir, t, i, i))
msglist = []
for msg, type, dir, t, idx1, idx2 in list:
msglist.append(msg)
- sysvals.vprint('kernel %s found in %s at %f' % (type, dir, t))
self.errorinfo[dir].append((type, t, idx1, idx2))
if self.kerror:
sysvals.dmesglog = True
if len(self.dmesgtext) < 1 and sysvals.dmesgfile:
lf.close()
return msglist
- def setStart(self, time):
+ def setStart(self, time, msg=''):
self.start = time
- def setEnd(self, time):
+ if msg:
+ try:
+ self.hwstart = datetime.strptime(msg, sysvals.tmstart)
+ except:
+ self.hwstart = 0
+ def setEnd(self, time, msg=''):
self.end = time
+ if msg:
+ try:
+ self.hwend = datetime.strptime(msg, sysvals.tmend)
+ except:
+ self.hwend = 0
def isTraceEventOutsideDeviceCalls(self, pid, time):
for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
self.trimTime(tS, tL, left)
self.tLow.append('%.0f'%(tL*1000))
lp = phase
+ def getMemTime(self):
+ if not self.hwstart or not self.hwend:
+ return
+ stime = (self.tSuspended - self.start) * 1000000
+ rtime = (self.end - self.tResumed) * 1000000
+ hws = self.hwstart + timedelta(microseconds=stime)
+ hwr = self.hwend - timedelta(microseconds=rtime)
+ self.tLow.append('%.0f'%((hwr - hws).total_seconds() * 1000))
def getTimeValues(self):
sktime = (self.tSuspended - self.tKernSus) * 1000
rktime = (self.tKernRes - self.tResumed) * 1000
c = self.addProcessUsageEvent(ps, tres)
if c > 0:
sysvals.vprint('%25s (res): %d' % (ps, c))
- def handleEndMarker(self, time):
+ def handleEndMarker(self, time, msg=''):
dm = self.dmesg
- self.setEnd(time)
+ self.setEnd(time, msg)
self.initDevicegroups()
# give suspend_prepare an end if needed
if 'suspend_prepare' in dm and dm['suspend_prepare']['end'] < 0:
if not self.fevent:
return False
if sysvals.usetracemarkers:
- if(self.name == 'SUSPEND START'):
+ if(self.name.startswith('SUSPEND START')):
return True
return False
else:
if not self.fevent:
return False
if sysvals.usetracemarkers:
- if(self.name == 'RESUME COMPLETE'):
+ if(self.name.startswith('RESUME COMPLETE')):
return True
return False
else:
def createHeader(self, sv, stamp):
if(not stamp['time']):
return
- self.html += '<div class="version"><a href="https://01.org/suspendresume">%s v%s</a></div>' \
+ self.html += '<div class="version"><a href="https://01.org/pm-graph">%s v%s</a></div>' \
% (sv.title, sv.version)
if sv.logmsg and sv.testlog:
self.html += '<button id="showtest" class="logbtn btnfmt">log</button>'
stampfmt = '# [a-z]*-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\
'(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\
' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$'
- batteryfmt = '^# battery (?P<a1>\w*) (?P<c1>\d*) (?P<a2>\w*) (?P<c2>\d*)'
- wififmt = '^# wifi (?P<w>.*)'
+ wififmt = '^# wifi *(?P<d>\S*) *(?P<s>\S*) *(?P<t>[0-9\.]+).*'
tstatfmt = '^# turbostat (?P<t>\S*)'
- mcelogfmt = '^# mcelog (?P<m>\S*)'
testerrfmt = '^# enter_sleep_error (?P<e>.*)'
sysinfofmt = '^# sysinfo .*'
cmdlinefmt = '^# command \| (?P<cmd>.*)'
- kparamsfmt = '^# kparams \| (?P<kp>.*)'
devpropfmt = '# Device Properties: .*'
pinfofmt = '# platform-(?P<val>[a-z,A-Z,0-9]*): (?P<info>.*)'
tracertypefmt = '# tracer: (?P<t>.*)'
self.stamp = ''
self.sysinfo = ''
self.cmdline = ''
- self.kparams = ''
self.testerror = []
- self.mcelog = []
self.turbostat = []
- self.battery = []
self.wifi = []
self.fwdata = []
self.ftrace_line_fmt = self.ftrace_line_fmt_nop
elif re.match(self.sysinfofmt, line):
self.sysinfo = line
return True
- elif re.match(self.kparamsfmt, line):
- self.kparams = line
- return True
elif re.match(self.cmdlinefmt, line):
self.cmdline = line
return True
- elif re.match(self.mcelogfmt, line):
- self.mcelog.append(line)
- return True
elif re.match(self.tstatfmt, line):
self.turbostat.append(line)
return True
- elif re.match(self.batteryfmt, line):
- self.battery.append(line)
- return True
elif re.match(self.wififmt, line):
self.wifi.append(line)
return True
def parseStamp(self, data, sv):
# global test data
m = re.match(self.stampfmt, self.stamp)
+ if not self.stamp or not m:
+ doError('data does not include the expected stamp')
data.stamp = {'time': '', 'host': '', 'mode': ''}
dt = datetime(int(m.group('y'))+2000, int(m.group('m')),
int(m.group('d')), int(m.group('H')), int(m.group('M')),
m = re.match(self.cmdlinefmt, self.cmdline)
if m:
sv.cmdline = m.group('cmd')
- if self.kparams:
- m = re.match(self.kparamsfmt, self.kparams)
- if m:
- sv.kparams = m.group('kp')
if not sv.stamp:
sv.stamp = data.stamp
# firmware data
data.fwSuspend, data.fwResume = int(m.group('s')), int(m.group('r'))
if(data.fwSuspend > 0 or data.fwResume > 0):
data.fwValid = True
- # mcelog data
- if len(self.mcelog) > data.testnumber:
- m = re.match(self.mcelogfmt, self.mcelog[data.testnumber])
- if m:
- data.mcelog = sv.b64unzip(m.group('m'))
# turbostat data
if len(self.turbostat) > data.testnumber:
m = re.match(self.tstatfmt, self.turbostat[data.testnumber])
if m:
data.turbostat = m.group('t')
- # battery data
- if len(self.battery) > data.testnumber:
- m = re.match(self.batteryfmt, self.battery[data.testnumber])
- if m:
- data.battery = m.groups()
# wifi data
if len(self.wifi) > data.testnumber:
m = re.match(self.wififmt, self.wifi[data.testnumber])
if m:
- data.wifi = m.group('w')
+ data.wifi = {'dev': m.group('d'), 'stat': m.group('s'),
+ 'time': float(m.group('t'))}
+ data.stamp['wifi'] = m.group('d')
# sleep mode enter errors
if len(self.testerror) > data.testnumber:
m = re.match(self.testerrfmt, self.testerror[data.testnumber])
if(t.startMarker()):
data = testrun[testidx].data
tp.parseStamp(data, sysvals)
- data.setStart(t.time)
+ data.setStart(t.time, t.name)
continue
if(not data):
continue
# find the end of resume
if(t.endMarker()):
- data.setEnd(t.time)
+ data.setEnd(t.time, t.name)
testidx += 1
if(testidx >= testcnt):
break
doError('%s does not exist' % sysvals.ftracefile)
if not live:
sysvals.setupAllKprobes()
- ksuscalls = ['pm_prepare_console']
+ ksuscalls = ['ksys_sync', 'pm_prepare_console']
krescalls = ['pm_restore_console']
tracewatch = ['irq_wakeup']
if sysvals.usekprobes:
testruns = []
testdata = []
testrun = 0
- data = 0
+ data, limbo = 0, True
tf = sysvals.openlog(sysvals.ftracefile, 'r')
phase = 'suspend_prepare'
for line in tf:
continue
# find the start of suspend
if(t.startMarker()):
- data = Data(len(testdata))
+ data, limbo = Data(len(testdata)), False
testdata.append(data)
testrun = TestRun(data)
testruns.append(testrun)
tp.parseStamp(data, sysvals)
- data.setStart(t.time)
+ data.setStart(t.time, t.name)
data.first_suspend_prepare = True
phase = data.setPhase('suspend_prepare', t.time, True)
continue
- if(not data):
+ if(not data or limbo):
continue
# process cpu exec line
if t.type == 'tracing_mark_write':
continue
# find the end of resume
if(t.endMarker()):
- data.handleEndMarker(t.time)
+ if data.tKernRes == 0:
+ data.tKernRes = t.time
+ data.handleEndMarker(t.time, t.name)
if(not sysvals.usetracemarkers):
# no trace markers? then quit and be sure to finish recording
# the event we used to trigger resume end
if('thaw_processes' in testrun.ttemp and len(testrun.ttemp['thaw_processes']) > 0):
# if an entry exists, assume this is its end
testrun.ttemp['thaw_processes'][-1]['end'] = t.time
- break
+ limbo = True
continue
# trace event processing
if(t.fevent):
# -- phase changes --
# start of kernel suspend
if(re.match('suspend_enter\[.*', t.name)):
- if(isbegin):
+ if(isbegin and data.tKernSus == 0):
data.tKernSus = t.time
continue
# suspend_prepare start
elif(re.match('machine_suspend\[.*', t.name)):
if(isbegin):
lp = data.lastPhase()
- if lp == 'resume_machine':
+ if lp.startswith('resume_machine'):
data.dmesg[lp]['end'] = t.time
phase = data.setPhase('suspend_machine', data.dmesg[lp]['end'], True)
data.setPhase(phase, t.time, False)
'proc': m_proc,
})
# start of kernel resume
- if(phase == 'suspend_prepare' and kprobename in ksuscalls):
+ if(data.tKernSus == 0 and phase == 'suspend_prepare' \
+ and kprobename in ksuscalls):
data.tKernSus = t.time
elif(t.freturn):
if(key not in tp.ktemp) or len(tp.ktemp[key]) < 1:
sysvals.vprint('WARNING: ftrace start marker is missing')
if data and not data.devicegroups:
sysvals.vprint('WARNING: ftrace end marker is missing')
- data.handleEndMarker(t.time)
+ data.handleEndMarker(t.time, t.name)
if sysvals.suspendmode == 'command':
for test in testruns:
data.fwValid = False
sysvals.vprint('WARNING: phase "%s" is missing!' % p)
lp = p
+ if not terr and 'dev' in data.wifi and data.wifi['stat'] == 'timeout':
+ terr = '%s%s failed in wifi_resume <i>(%s %.0fs timeout)</i>' % \
+ (sysvals.suspendmode, tn, data.wifi['dev'], data.wifi['time'])
+ error.append(terr)
if not terr and data.enterfail:
pprint('test%s FAILED: enter %s failed with %s' % (tn, sysvals.suspendmode, data.enterfail))
terr = 'test%s failed to enter %s mode' % (tn, sysvals.suspendmode)
tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()]
iMin, iMed, iMax = [0, 0], [0, 0], [0, 0]
num = 0
- useturbo = False
+ useturbo = usewifi = False
lastmode = ''
cnt = dict()
for data in sorted(testruns, key=lambda v:(v['mode'], v['host'], v['kernel'], v['time'])):
tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()]
iMin, iMed, iMax = [0, 0], [0, 0], [0, 0]
num = 0
- pkgpc10 = syslpi = ''
+ pkgpc10 = syslpi = wifi = ''
if 'pkgpc10' in data and 'syslpi' in data:
- pkgpc10 = data['pkgpc10']
- syslpi = data['syslpi']
- useturbo = True
+ pkgpc10, syslpi, useturbo = data['pkgpc10'], data['syslpi'], True
+ if 'wifi' in data:
+ wifi, usewifi = data['wifi'], True
res = data['result']
tVal = [float(data['suspend']), float(data['resume'])]
list[mode]['data'].append([data['host'], data['kernel'],
data['time'], tVal[0], tVal[1], data['url'], res,
data['issues'], data['sus_worst'], data['sus_worsttime'],
- data['res_worst'], data['res_worsttime'], pkgpc10, syslpi])
+ data['res_worst'], data['res_worsttime'], pkgpc10, syslpi, wifi])
idx = len(list[mode]['data']) - 1
if res.startswith('fail in'):
res = 'fail'
td = '\t<td>{0}</td>\n'
tdh = '\t<td{1}>{0}</td>\n'
tdlink = '\t<td><a href="{0}">html</a></td>\n'
- colspan = '14' if useturbo else '12'
+ cols = 12
+ if useturbo:
+ cols += 2
+ if usewifi:
+ cols += 1
+ colspan = '%d' % cols
# table header
html += '<table>\n<tr>\n' + th.format('#') +\
th.format('Worst Resume Device') + th.format('RD Time')
if useturbo:
html += th.format('PkgPC10') + th.format('SysLPI')
+ if usewifi:
+ html += th.format('Wifi')
html += th.format('Detail')+'</tr>\n'
# export list into html
head = '<tr class="head"><td>{0}</td><td>{1}</td>'+\
if useturbo:
html += td.format(d[12]) # pkg_pc10
html += td.format(d[13]) # syslpi
+ if usewifi:
+ html += td.format(d[14]) # wifi
html += tdlink.format(d[5]) if d[5] else td.format('') # url
html += '</tr>\n'
num += 1
kerror = True
if(sysvals.suspendmode in ['freeze', 'standby']):
data.trimFreezeTime(testruns[-1].tSuspended)
+ else:
+ data.getMemTime()
# html function templates
html_error = '<div id="{1}" title="kernel error/warning" class="err" style="right:{0}%">{2}→</div>\n'
'<td class="green">Execution Time: <b>{0} ms</b></td>'\
'<td class="yellow">Command: <b>{1}</b></td>'\
'</tr>\n</table>\n'
- html_timegroups = '<table class="time2">\n<tr>'\
- '<td class="green" title="time from kernel enter_state({5}) to firmware mode [kernel time only]">{4}Kernel Suspend: {0} ms</td>'\
- '<td class="purple">{4}Firmware Suspend: {1} ms</td>'\
- '<td class="purple">{4}Firmware Resume: {2} ms</td>'\
- '<td class="yellow" title="time from firmware mode to return from kernel enter_state({5}) [kernel time only]">{4}Kernel Resume: {3} ms</td>'\
- '</tr>\n</table>\n'
html_fail = '<table class="testfail"><tr><td>{0}</td></tr></table>\n'
+ html_kdesc = '<td class="{3}" title="time spent in kernel execution">{0}Kernel {2}: {1} ms</td>'
+ html_fwdesc = '<td class="{3}" title="time spent in firmware">{0}Firmware {2}: {1} ms</td>'
+ html_wifdesc = '<td class="yellow" title="time for wifi to reconnect after resume complete ({2})">{0}Wifi Resume: {1}</td>'
# html format variables
scaleH = 20
# Generate the header for this timeline
for data in testruns:
tTotal = data.end - data.start
- sktime, rktime = data.getTimeValues()
if(tTotal == 0):
doError('No timeline data')
- if(len(data.tLow) > 0):
- low_time = '+'.join(data.tLow)
if sysvals.suspendmode == 'command':
- run_time = '%.0f'%((data.end-data.start)*1000)
+ run_time = '%.0f' % (tTotal * 1000)
if sysvals.testcommand:
testdesc = sysvals.testcommand
else:
testdesc = ordinal(data.testnumber+1)+' '+testdesc
thtml = html_timetotal3.format(run_time, testdesc)
devtl.html += thtml
- elif data.fwValid:
- suspend_time = '%.0f'%(sktime + (data.fwSuspend/1000000.0))
- resume_time = '%.0f'%(rktime + (data.fwResume/1000000.0))
- testdesc1 = 'Total'
- testdesc2 = ''
- stitle = 'time from kernel enter_state(%s) to low-power mode [kernel & firmware time]' % sysvals.suspendmode
- rtitle = 'time from low-power mode to return from kernel enter_state(%s) [firmware & kernel time]' % sysvals.suspendmode
- if(len(testruns) > 1):
- testdesc1 = testdesc2 = ordinal(data.testnumber+1)
- testdesc2 += ' '
- if(len(data.tLow) == 0):
- thtml = html_timetotal.format(suspend_time, \
- resume_time, testdesc1, stitle, rtitle)
- else:
- thtml = html_timetotal2.format(suspend_time, low_time, \
- resume_time, testdesc1, stitle, rtitle)
- devtl.html += thtml
+ continue
+ # typical full suspend/resume header
+ stot, rtot = sktime, rktime = data.getTimeValues()
+ ssrc, rsrc, testdesc, testdesc2 = ['kernel'], ['kernel'], 'Kernel', ''
+ if data.fwValid:
+ stot += (data.fwSuspend/1000000.0)
+ rtot += (data.fwResume/1000000.0)
+ ssrc.append('firmware')
+ rsrc.append('firmware')
+ testdesc = 'Total'
+ if 'time' in data.wifi and data.wifi['stat'] != 'timeout':
+ rtot += data.end - data.tKernRes + (data.wifi['time'] * 1000.0)
+ rsrc.append('wifi')
+ testdesc = 'Total'
+ suspend_time, resume_time = '%.3f' % stot, '%.3f' % rtot
+ stitle = 'time from kernel suspend start to %s mode [%s time]' % \
+ (sysvals.suspendmode, ' & '.join(ssrc))
+ rtitle = 'time from %s mode to kernel resume complete [%s time]' % \
+ (sysvals.suspendmode, ' & '.join(rsrc))
+ if(len(testruns) > 1):
+ testdesc = testdesc2 = ordinal(data.testnumber+1)
+ testdesc2 += ' '
+ if(len(data.tLow) == 0):
+ thtml = html_timetotal.format(suspend_time, \
+ resume_time, testdesc, stitle, rtitle)
+ else:
+ low_time = '+'.join(data.tLow)
+ thtml = html_timetotal2.format(suspend_time, low_time, \
+ resume_time, testdesc, stitle, rtitle)
+ devtl.html += thtml
+ if not data.fwValid and 'dev' not in data.wifi:
+ continue
+ # extra detail when the times come from multiple sources
+ thtml = '<table class="time2">\n<tr>'
+ thtml += html_kdesc.format(testdesc2, '%.3f'%sktime, 'Suspend', 'green')
+ if data.fwValid:
sftime = '%.3f'%(data.fwSuspend / 1000000.0)
rftime = '%.3f'%(data.fwResume / 1000000.0)
- devtl.html += html_timegroups.format('%.3f'%sktime, \
- sftime, rftime, '%.3f'%rktime, testdesc2, sysvals.suspendmode)
- else:
- suspend_time = '%.3f' % sktime
- resume_time = '%.3f' % rktime
- testdesc = 'Kernel'
- stitle = 'time from kernel enter_state(%s) to firmware mode [kernel time only]' % sysvals.suspendmode
- rtitle = 'time from firmware mode to return from kernel enter_state(%s) [kernel time only]' % sysvals.suspendmode
- if(len(testruns) > 1):
- testdesc = ordinal(data.testnumber+1)+' '+testdesc
- if(len(data.tLow) == 0):
- thtml = html_timetotal.format(suspend_time, \
- resume_time, testdesc, stitle, rtitle)
+ thtml += html_fwdesc.format(testdesc2, sftime, 'Suspend', 'green')
+ thtml += html_fwdesc.format(testdesc2, rftime, 'Resume', 'yellow')
+ thtml += html_kdesc.format(testdesc2, '%.3f'%rktime, 'Resume', 'yellow')
+ if 'time' in data.wifi:
+ if data.wifi['stat'] != 'timeout':
+ wtime = '%.0f ms'%(data.end - data.tKernRes + (data.wifi['time'] * 1000.0))
else:
- thtml = html_timetotal2.format(suspend_time, low_time, \
- resume_time, testdesc, stitle, rtitle)
- devtl.html += thtml
-
+ wtime = 'TIMEOUT'
+ thtml += html_wifdesc.format(testdesc2, wtime, data.wifi['dev'])
+ thtml += '</tr>\n</table>\n'
+ devtl.html += thtml
if testfail:
devtl.html += html_fail.format(testfail)
# Description:
# Execute system suspend through the sysfs interface, then copy the output
# dmesg and ftrace files to the test output directory.
-def executeSuspend():
+def executeSuspend(quiet=False):
pm = ProcessMonitor()
tp = sysvals.tpath
- wifi = sysvals.checkWifi()
+ if sysvals.wifi:
+ wifi = sysvals.checkWifi()
testdata = []
- battery = True if getBattery() else False
# run these commands to prepare the system for suspend
if sysvals.display:
- pprint('SET DISPLAY TO %s' % sysvals.display.upper())
+ if not quiet:
+ pprint('SET DISPLAY TO %s' % sysvals.display.upper())
displayControl(sysvals.display)
time.sleep(1)
if sysvals.sync:
- pprint('SYNCING FILESYSTEMS')
+ if not quiet:
+ pprint('SYNCING FILESYSTEMS')
call('sync', shell=True)
# mark the start point in the kernel ring buffer just as we start
sysvals.initdmesg()
# start ftrace
if(sysvals.usecallgraph or sysvals.usetraceevents):
- pprint('START TRACING')
+ if not quiet:
+ pprint('START TRACING')
sysvals.fsetVal('1', 'tracing_on')
if sysvals.useprocmon:
pm.start()
+ sysvals.cmdinfo(True)
# execute however many s/r runs requested
for count in range(1,sysvals.execcount+1):
# x2delay in between test runs
pprint('SUSPEND START')
else:
pprint('SUSPEND START (press a key to resume)')
- sysvals.mcelog(True)
- bat1 = getBattery() if battery else False
# set rtcwake
if(sysvals.rtcwake):
- pprint('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime)
+ if not quiet:
+ pprint('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime)
sysvals.rtcWakeAlarmOn()
# start of suspend trace marker
if(sysvals.usecallgraph or sysvals.usetraceevents):
- sysvals.fsetVal('SUSPEND START', 'trace_marker')
+ sysvals.fsetVal(datetime.now().strftime(sysvals.tmstart), 'trace_marker')
# predelay delay
if(count == 1 and sysvals.predelay > 0):
sysvals.fsetVal('WAIT %d' % sysvals.predelay, 'trace_marker')
# return from suspend
pprint('RESUME COMPLETE')
if(sysvals.usecallgraph or sysvals.usetraceevents):
- sysvals.fsetVal('RESUME COMPLETE', 'trace_marker')
+ sysvals.fsetVal(datetime.now().strftime(sysvals.tmend), 'trace_marker')
+ if sysvals.wifi and wifi:
+ tdata['wifi'] = sysvals.pollWifi(wifi)
if(sysvals.suspendmode == 'mem' or sysvals.suspendmode == 'command'):
tdata['fw'] = getFPDT(False)
- mcelog = sysvals.mcelog()
- if mcelog:
- tdata['mcelog'] = mcelog
- bat2 = getBattery() if battery else False
- if battery and bat1 and bat2:
- tdata['bat'] = (bat1, bat2)
- if 'device' in wifi and 'ip' in wifi:
- tdata['wifi'] = (wifi, sysvals.checkWifi())
testdata.append(tdata)
+ cmdafter = sysvals.cmdinfo(False)
# stop ftrace
if(sysvals.usecallgraph or sysvals.usetraceevents):
if sysvals.useprocmon:
pm.stop()
sysvals.fsetVal('0', 'tracing_on')
# grab a copy of the dmesg output
- pprint('CAPTURING DMESG')
+ if not quiet:
+ pprint('CAPTURING DMESG')
sysvals.getdmesg(testdata)
# grab a copy of the ftrace output
if(sysvals.usecallgraph or sysvals.usetraceevents):
- pprint('CAPTURING TRACE')
+ if not quiet:
+ pprint('CAPTURING TRACE')
op = sysvals.writeDatafileHeader(sysvals.ftracefile, testdata)
fp = open(tp+'trace', 'r')
for line in fp:
op.write(line)
op.close()
sysvals.fsetVal('', 'trace')
- sysvals.platforminfo()
- return testdata
+ sysvals.platforminfo(cmdafter)
def readFile(file):
if os.path.islink(file):
count += 1
return out
-def getBattery():
- p, charge, bat = '/sys/class/power_supply', 0, {}
- if not os.path.exists(p):
- return False
- for d in os.listdir(p):
- type = sysvals.getVal(os.path.join(p, d, 'type')).strip().lower()
- if type != 'battery':
- continue
- for v in ['status', 'energy_now', 'capacity_now']:
- bat[v] = sysvals.getVal(os.path.join(p, d, v)).strip().lower()
- break
- if 'status' not in bat:
- return False
- ac = False if 'discharging' in bat['status'] else True
- for v in ['energy_now', 'capacity_now']:
- if v in bat and bat[v]:
- charge = int(bat[v])
- return (ac, charge)
-
def displayControl(cmd):
xset, ret = 'timeout 10 xset -d :0.0 {0}', 0
if sysvals.sudouser:
status = 'rtcwake is not properly supported'
pprint(' is rtcwake supported: %s' % res)
+ # check info commands
+ pprint(' optional commands this tool may use for info:')
+ no = sysvals.colorText('MISSING')
+ yes = sysvals.colorText('FOUND', 32)
+ for c in ['turbostat', 'mcelog', 'lspci', 'lsusb']:
+ if c == 'turbostat':
+ res = yes if sysvals.haveTurbostat() else no
+ else:
+ res = yes if sysvals.getExec(c) else no
+ pprint(' %s: %s' % (c, res))
+
if not probecheck:
return status
doError(name+': value should be between %f and %f' % (min, max), True)
return val
-def processData(live=False):
- pprint('PROCESSING DATA')
+def processData(live=False, quiet=False):
+ if not quiet:
+ pprint('PROCESSING DATA')
sysvals.vprint('usetraceevents=%s, usetracemarkers=%s, usekprobes=%s' % \
(sysvals.usetraceevents, sysvals.usetracemarkers, sysvals.usekprobes))
error = ''
parseKernelLog(data)
if(sysvals.ftracefile and (sysvals.usecallgraph or sysvals.usetraceevents)):
appendIncompleteTraceLog(testruns)
+ if not sysvals.stamp:
+ pprint('ERROR: data does not include the expected stamp')
+ return (testruns, {'error': 'timeline generation failed'})
shown = ['bios', 'biosdate', 'cpu', 'host', 'kernel', 'man', 'memfr',
- 'memsz', 'mode', 'numcpu', 'plat', 'time']
+ 'memsz', 'mode', 'numcpu', 'plat', 'time', 'wifi']
sysvals.vprint('System Info:')
for key in sorted(sysvals.stamp):
if key in shown:
sysvals.vprint(' %-8s : %s' % (key.upper(), sysvals.stamp[key]))
- if sysvals.kparams:
- sysvals.vprint('Kparams:\n %s' % sysvals.kparams)
sysvals.vprint('Command:\n %s' % sysvals.cmdline)
for data in testruns:
- if data.mcelog:
- sysvals.vprint('MCELOG Data:')
- for line in data.mcelog.split('\n'):
- sysvals.vprint(' %s' % line)
if data.turbostat:
idx, s = 0, 'Turbostat:\n '
for val in data.turbostat.split('|'):
s += '\n '
s += val + ' '
sysvals.vprint(s)
- if data.battery:
- a1, c1, a2, c2 = data.battery
- s = 'Battery:\n Before - AC: %s, Charge: %d\n After - AC: %s, Charge: %d' % \
- (a1, int(c1), a2, int(c2))
- sysvals.vprint(s)
- if data.wifi:
- w = data.wifi.replace('|', ' ').split(',')
- s = 'Wifi:\n Before %s\n After %s' % \
- (w[0], w[1])
- sysvals.vprint(s)
data.printDetails()
- if len(sysvals.platinfo) > 0:
- sysvals.vprint('\nPlatform Info:')
- for info in sysvals.platinfo:
- sysvals.vprint(info[0]+' - '+info[1])
- sysvals.vprint(info[2])
- sysvals.vprint('')
+ if len(sysvals.platinfo) > 0:
+ sysvals.vprint('\nPlatform Info:')
+ for info in sysvals.platinfo:
+ sysvals.vprint('[%s - %s]' % (info[0], info[1]))
+ sysvals.vprint(info[2])
+ sysvals.vprint('')
if sysvals.cgdump:
for data in testruns:
data.debugPrint()
return (testruns, {'error': 'timeline generation failed'})
sysvals.vprint('Creating the html timeline (%s)...' % sysvals.htmlfile)
createHTML(testruns, error)
- pprint('DONE')
+ if not quiet:
+ pprint('DONE')
data = testruns[0]
stamp = data.stamp
stamp['suspend'], stamp['resume'] = data.getTimeValues()
doError('a directory already exists with this name: %s' % sysvals.htmlfile)
elif not os.access(sysvals.htmlfile, os.W_OK):
doError('missing permission to write to %s' % sysvals.htmlfile)
- testruns, stamp = processData(False)
- sysvals.logmsg = ''
+ testruns, stamp = processData()
+ sysvals.resetlog()
return stamp
# Function: runTest
# Description:
# execute a suspend/resume, gather the logs, and generate the output
-def runTest(n=0):
+def runTest(n=0, quiet=False):
# prepare for the test
- sysvals.initFtrace()
+ sysvals.initFtrace(quiet)
sysvals.initTestOutput('suspend')
# execute the test
- testdata = executeSuspend()
+ executeSuspend(quiet)
sysvals.cleanupFtrace()
if sysvals.skiphtml:
+ sysvals.outputResult({}, n)
sysvals.sudoUserchown(sysvals.testdir)
return
- if not testdata[0]['error']:
- testruns, stamp = processData(True)
- for data in testruns:
- del data
- else:
- stamp = testdata[0]
-
+ testruns, stamp = processData(True, quiet)
+ for data in testruns:
+ del data
sysvals.sudoUserchown(sysvals.testdir)
sysvals.outputResult(stamp, n)
if 'error' in stamp:
return 0
def find_in_html(html, start, end, firstonly=True):
- n, out = 0, []
- while n < len(html):
- m = re.search(start, html[n:])
+ n, cnt, out = 0, len(html), []
+ while n < cnt:
+ e = cnt if (n + 10000 > cnt or n == 0) else n + 10000
+ m = re.search(start, html[n:e])
if not m:
break
i = m.end()
- m = re.search(end, html[n+i:])
+ m = re.search(end, html[n+i:e])
if not m:
break
j = m.start()
tstr = dt.strftime('%Y/%m/%d %H:%M:%S')
error = find_in_html(html, '<table class="testfail"><tr><td>', '</td>')
if error:
- m = re.match('[a-z]* failed in (?P<p>[a-z0-9_]*) phase', error)
+ m = re.match('[a-z0-9]* failed in (?P<p>\S*).*', error)
if m:
result = 'fail in %s' % m.group('p')
else:
elist[err[0]] += 1
for i in elist:
ilist.append('%sx%d' % (i, elist[i]) if elist[i] > 1 else i)
+ wifi = find_in_html(html, 'Wifi Resume: ', '</td>')
+ if wifi:
+ extra['wifi'] = wifi
low = find_in_html(html, 'freeze time: <b>', ' ms</b>')
if low and '|' in low:
issue = 'FREEZEx%d' % len(low.split('|'))
for dirname, dirnames, filenames in os.walk(subdir):
sysvals.dmesgfile = sysvals.ftracefile = sysvals.htmlfile = ''
for filename in filenames:
- if(re.match('.*_dmesg.txt', filename)):
- sysvals.dmesgfile = os.path.join(dirname, filename)
- elif(re.match('.*_ftrace.txt', filename)):
- sysvals.ftracefile = os.path.join(dirname, filename)
+ file = os.path.join(dirname, filename)
+ if sysvals.usable(file):
+ if(re.match('.*_dmesg.txt', filename)):
+ sysvals.dmesgfile = file
+ elif(re.match('.*_ftrace.txt', filename)):
+ sysvals.ftracefile = file
sysvals.setOutputFile()
- if sysvals.ftracefile and sysvals.htmlfile and \
- (force or not os.path.exists(sysvals.htmlfile)):
+ if (sysvals.dmesgfile or sysvals.ftracefile) and sysvals.htmlfile and \
+ (force or not sysvals.usable(sysvals.htmlfile)):
pprint('FTRACE: %s' % sysvals.ftracefile)
if sysvals.dmesgfile:
pprint('DMESG : %s' % sysvals.dmesgfile)
sysvals.cgtest = getArgInt('cgtest', value, 0, 1, False)
elif(option == 'cgphase'):
d = Data(0)
- if value not in d.sortedPhases():
+ if value not in d.phasedef:
doError('invalid phase --> (%s: %s), valid phases are %s'\
- % (option, value, d.sortedPhases()), True)
+ % (option, value, d.phasedef.keys()), True)
sysvals.cgphase = value
elif(option == 'fadd'):
file = sysvals.configFile(value)
nums = value.split()
if len(nums) != 2:
doError('multi requires 2 integers (exec_count and delay)', True)
- sysvals.multitest['run'] = True
- sysvals.multitest['count'] = getArgInt('multi: n d (exec count)', nums[0], 2, 1000000, False)
- sysvals.multitest['delay'] = getArgInt('multi: n d (delay between tests)', nums[1], 0, 3600, False)
+ sysvals.multiinit(nums[0], nums[1])
elif(option == 'devicefilter'):
sysvals.setDeviceFilter(value)
elif(option == 'expandcg'):
' -srgap Add a visible gap in the timeline between sus/res (default: disabled)\n'\
' -skiphtml Run the test and capture the trace logs, but skip the timeline (default: disabled)\n'\
' -result fn Export a results table to a text file for parsing.\n'\
+ ' -wifi If a wifi connection is available, check that it reconnects after resume.\n'\
' [testprep]\n'\
' -sync Sync the filesystems before starting the test\n'\
' -rs on/off Enable/disable runtime suspend for all devices, restore all after test\n'\
' -predelay t Include t ms delay before 1st suspend (default: 0 ms)\n'\
' -postdelay t Include t ms delay after last resume (default: 0 ms)\n'\
' -mindev ms Discard all device blocks shorter than ms milliseconds (e.g. 0.001 for us)\n'\
- ' -multi n d Execute <n> consecutive tests at <d> seconds intervals. The outputs will\n'\
- ' be created in a new subdirectory with a summary page.\n'\
+ ' -multi n d Execute <n> consecutive tests at <d> seconds intervals. If <n> is followed\n'\
+ ' by a "d", "h", or "m" execute for <n> days, hours, or mins instead.\n'\
+ ' The outputs will be created in a new subdirectory with a summary page.\n'\
+ ' -maxfail n Abort a -multi run after n consecutive fails (default is 0 = never abort)\n'\
' [debug]\n'\
' -f Use ftrace to create device callgraphs (default: disabled)\n'\
' -ftop Use ftrace on the top level call: "%s" (default: disabled)\n'\
' -modes List available suspend modes\n'\
' -status Test to see if the system is enabled to run this tool\n'\
' -fpdt Print out the contents of the ACPI Firmware Performance Data Table\n'\
- ' -battery Print out battery info (if available)\n'\
- ' -wifi Print out wifi connection info (if wireless-tools and device exists)\n'\
+ ' -wificheck Print out wifi connection info\n'\
' -x<mode> Test xset by toggling the given mode (on/off/standby/suspend)\n'\
' -sysinfo Print out system info extracted from BIOS\n'\
' -devinfo Print out the pm settings of all devices which support runtime suspend\n'\
+ ' -cmdinfo Print out all the platform info collected before and after suspend/resume\n'\
' -flist Print the list of functions currently being captured in ftrace\n'\
' -flistall Print all functions capable of being captured in ftrace\n'\
' -summary dir Create a summary of tests in this dir [-genhtml builds missing html]\n'\
genhtml = False
cmd = ''
simplecmds = ['-sysinfo', '-modes', '-fpdt', '-flist', '-flistall',
- '-devinfo', '-status', '-battery', '-xon', '-xoff', '-xstandby',
- '-xsuspend', '-xinit', '-xreset', '-xstat', '-wifi']
+ '-devinfo', '-status', '-xon', '-xoff', '-xstandby', '-xsuspend',
+ '-xinit', '-xreset', '-xstat', '-wificheck', '-cmdinfo']
if '-f' in sys.argv:
sysvals.cgskip = sysvals.configFile('cgskip.txt')
# loop through the command line arguments
sysvals.usedevsrc = True
elif(arg == '-sync'):
sysvals.sync = True
+ elif(arg == '-wifi'):
+ sysvals.wifi = True
elif(arg == '-gzip'):
sysvals.gzip = True
+ elif(arg == '-info'):
+ try:
+ val = next(args)
+ except:
+ doError('-info requires one string argument', True)
elif(arg == '-rs'):
try:
val = next(args)
sysvals.cgexp = True
elif(arg == '-srgap'):
sysvals.srgap = 5
+ elif(arg == '-maxfail'):
+ sysvals.maxfail = getArgInt('-maxfail', args, 0, 1000000)
elif(arg == '-multi'):
- sysvals.multitest['run'] = True
- sysvals.multitest['count'] = getArgInt('-multi n d (exec count)', args, 2, 1000000)
- sysvals.multitest['delay'] = getArgInt('-multi n d (delay between tests)', args, 0, 3600)
+ try:
+ c, d = next(args), next(args)
+ except:
+ doError('-multi requires two values', True)
+ sysvals.multiinit(c, d)
elif(arg == '-o'):
try:
val = next(args)
elif(cmd == 'fpdt'):
if not getFPDT(True):
ret = 1
- elif(cmd == 'battery'):
- out = getBattery()
- if out:
- pprint('AC Connect : %s\nBattery Charge: %d' % out)
- else:
- pprint('no battery found')
- ret = 1
elif(cmd == 'sysinfo'):
sysvals.printSystemInfo(True)
elif(cmd == 'devinfo'):
ret = displayControl(cmd[1:])
elif(cmd == 'xstat'):
pprint('Display Status: %s' % displayControl('stat').upper())
- elif(cmd == 'wifi'):
- out = sysvals.checkWifi()
- if 'device' not in out:
- pprint('WIFI interface not found')
+ elif(cmd == 'wificheck'):
+ dev = sysvals.checkWifi()
+ if dev:
+ print('%s is connected' % sysvals.wifiDetails(dev))
else:
- for key in sorted(out):
- pprint('%6s: %s' % (key.upper(), out[key]))
+ print('No wifi connection found')
+ elif(cmd == 'cmdinfo'):
+ for out in sysvals.cmdinfo(False, True):
+ print('[%s - %s]\n%s\n' % out)
sys.exit(ret)
# if instructed, re-analyze existing data files
setRuntimeSuspend(True)
if sysvals.display:
displayControl('init')
- ret = 0
+ failcnt, ret = 0, 0
if sysvals.multitest['run']:
# run multiple tests in a separate subdirectory
if not sysvals.outdir:
- s = 'suspend-x%d' % sysvals.multitest['count']
- sysvals.outdir = datetime.now().strftime(s+'-%y%m%d-%H%M%S')
+ if 'time' in sysvals.multitest:
+ s = '-%dm' % sysvals.multitest['time']
+ else:
+ s = '-x%d' % sysvals.multitest['count']
+ sysvals.outdir = datetime.now().strftime('suspend-%y%m%d-%H%M%S'+s)
if not os.path.isdir(sysvals.outdir):
os.makedirs(sysvals.outdir)
+ sysvals.sudoUserchown(sysvals.outdir)
+ finish = datetime.now()
+ if 'time' in sysvals.multitest:
+ finish += timedelta(minutes=sysvals.multitest['time'])
for i in range(sysvals.multitest['count']):
- if(i != 0):
+ sysvals.multistat(True, i, finish)
+ if i != 0 and sysvals.multitest['delay'] > 0:
pprint('Waiting %d seconds...' % (sysvals.multitest['delay']))
time.sleep(sysvals.multitest['delay'])
- pprint('TEST (%d/%d) START' % (i+1, sysvals.multitest['count']))
fmt = 'suspend-%y%m%d-%H%M%S'
sysvals.testdir = os.path.join(sysvals.outdir, datetime.now().strftime(fmt))
- ret = runTest(i+1)
- pprint('TEST (%d/%d) COMPLETE' % (i+1, sysvals.multitest['count']))
- sysvals.logmsg = ''
+ ret = runTest(i+1, True)
+ failcnt = 0 if not ret else failcnt + 1
+ if sysvals.maxfail > 0 and failcnt >= sysvals.maxfail:
+ pprint('Maximum fail count of %d reached, aborting multitest' % (sysvals.maxfail))
+ break
+ time.sleep(5)
+ sysvals.resetlog()
+ sysvals.multistat(False, i, finish)
+ if 'time' in sysvals.multitest and datetime.now() >= finish:
+ break
if not sysvals.skiphtml:
runSummary(sysvals.outdir, False, False)
sysvals.sudoUserchown(sysvals.outdir)
static void test_fexit_bpf2bpf_common(const char *obj_file,
const char *target_obj_file,
int prog_cnt,
- const char **prog_name)
+ const char **prog_name,
+ bool run_prog)
{
struct bpf_object *obj = NULL, *pkt_obj;
int err, pkt_fd, i;
err = bpf_prog_load(target_obj_file, BPF_PROG_TYPE_UNSPEC,
&pkt_obj, &pkt_fd);
- if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno))
+ if (CHECK(err, "tgt_prog_load", "file %s err %d errno %d\n",
+ target_obj_file, err, errno))
return;
DECLARE_LIBBPF_OPTS(bpf_object_open_opts, opts,
.attach_prog_fd = pkt_fd,
obj = bpf_object__open_file(obj_file, &opts);
if (CHECK(IS_ERR_OR_NULL(obj), "obj_open",
- "failed to open fexit_bpf2bpf: %ld\n",
+ "failed to open %s: %ld\n", obj_file,
PTR_ERR(obj)))
goto close_prog;
if (CHECK(IS_ERR(link[i]), "attach_trace", "failed to link\n"))
goto close_prog;
}
+
+ if (!run_prog)
+ goto close_prog;
+
data_map = bpf_object__find_map_by_name(obj, "fexit_bp.bss");
if (CHECK(!data_map, "find_data_map", "data map not found\n"))
goto close_prog;
test_fexit_bpf2bpf_common("./fexit_bpf2bpf_simple.o",
"./test_pkt_md_access.o",
ARRAY_SIZE(prog_name),
- prog_name);
+ prog_name, true);
}
static void test_target_yes_callees(void)
test_fexit_bpf2bpf_common("./fexit_bpf2bpf.o",
"./test_pkt_access.o",
ARRAY_SIZE(prog_name),
- prog_name);
+ prog_name, true);
}
static void test_func_replace(void)
test_fexit_bpf2bpf_common("./fexit_bpf2bpf.o",
"./test_pkt_access.o",
ARRAY_SIZE(prog_name),
- prog_name);
+ prog_name, true);
+}
+
+static void test_func_replace_verify(void)
+{
+ const char *prog_name[] = {
+ "freplace/do_bind",
+ };
+ test_fexit_bpf2bpf_common("./freplace_connect4.o",
+ "./connect4_prog.o",
+ ARRAY_SIZE(prog_name),
+ prog_name, false);
}
void test_fexit_bpf2bpf(void)
test_target_no_callees();
test_target_yes_callees();
test_func_replace();
+ test_func_replace_verify();
}
const size_t map_sz = roundup_page(sizeof(struct map_data));
const int zero = 0, one = 1, two = 2, far = 1500;
const long page_size = sysconf(_SC_PAGE_SIZE);
- int err, duration = 0, i, data_map_fd;
+ int err, duration = 0, i, data_map_fd, data_map_id, tmp_fd;
struct bpf_map *data_map, *bss_map;
void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp1, *tmp2;
struct test_mmap__bss *bss_data;
+ struct bpf_map_info map_info;
+ __u32 map_info_sz = sizeof(map_info);
struct map_data *map_data;
struct test_mmap *skel;
__u64 val = 0;
-
skel = test_mmap__open_and_load();
if (CHECK(!skel, "skel_open_and_load", "skeleton open/load failed\n"))
return;
data_map = skel->maps.data_map;
data_map_fd = bpf_map__fd(data_map);
+ /* get map's ID */
+ memset(&map_info, 0, map_info_sz);
+ err = bpf_obj_get_info_by_fd(data_map_fd, &map_info, &map_info_sz);
+ if (CHECK(err, "map_get_info", "failed %d\n", errno))
+ goto cleanup;
+ data_map_id = map_info.id;
+
+ /* mmap BSS map */
bss_mmaped = mmap(NULL, bss_sz, PROT_READ | PROT_WRITE, MAP_SHARED,
bpf_map__fd(bss_map), 0);
if (CHECK(bss_mmaped == MAP_FAILED, "bss_mmap",
"data_map freeze succeeded: err=%d, errno=%d\n", err, errno))
goto cleanup;
+ err = mprotect(map_mmaped, map_sz, PROT_READ);
+ if (CHECK(err, "mprotect_ro", "mprotect to r/o failed %d\n", errno))
+ goto cleanup;
+
/* unmap R/W mapping */
err = munmap(map_mmaped, map_sz);
map_mmaped = NULL;
map_mmaped = NULL;
goto cleanup;
}
+ err = mprotect(map_mmaped, map_sz, PROT_WRITE);
+ if (CHECK(!err, "mprotect_wr", "mprotect() succeeded unexpectedly!\n"))
+ goto cleanup;
+ err = mprotect(map_mmaped, map_sz, PROT_EXEC);
+ if (CHECK(!err, "mprotect_ex", "mprotect() succeeded unexpectedly!\n"))
+ goto cleanup;
map_data = map_mmaped;
/* map/unmap in a loop to test ref counting */
CHECK_FAIL(map_data->val[far] != 3 * 321);
munmap(tmp2, 4 * page_size);
+
+ tmp1 = mmap(NULL, map_sz, PROT_READ, MAP_SHARED, data_map_fd, 0);
+ if (CHECK(tmp1 == MAP_FAILED, "last_mmap", "failed %d\n", errno))
+ goto cleanup;
+
+ test_mmap__destroy(skel);
+ skel = NULL;
+ CHECK_FAIL(munmap(bss_mmaped, bss_sz));
+ bss_mmaped = NULL;
+ CHECK_FAIL(munmap(map_mmaped, map_sz));
+ map_mmaped = NULL;
+
+ /* map should be still held by active mmap */
+ tmp_fd = bpf_map_get_fd_by_id(data_map_id);
+ if (CHECK(tmp_fd < 0, "get_map_by_id", "failed %d\n", errno)) {
+ munmap(tmp1, map_sz);
+ goto cleanup;
+ }
+ close(tmp_fd);
+
+ /* this should release data map finally */
+ munmap(tmp1, map_sz);
+
+ /* we need to wait for RCU grace period */
+ for (i = 0; i < 10000; i++) {
+ __u32 id = data_map_id - 1;
+ if (bpf_map_get_next_id(id, &id) || id > data_map_id)
+ break;
+ usleep(1);
+ }
+
+ /* should fail to get map FD by non-existing ID */
+ tmp_fd = bpf_map_get_fd_by_id(data_map_id);
+ if (CHECK(tmp_fd >= 0, "get_map_by_id_after",
+ "unexpectedly succeeded %d\n", tmp_fd)) {
+ close(tmp_fd);
+ goto cleanup;
+ }
+
cleanup:
if (bss_mmaped)
CHECK_FAIL(munmap(bss_mmaped, bss_sz));
{"lwt_seg6local", {0, BPF_PROG_TYPE_LWT_SEG6LOCAL, 0}, {-EINVAL, 0} },
{
"cgroup_skb/ingress",
- {0, BPF_PROG_TYPE_CGROUP_SKB, 0},
+ {0, BPF_PROG_TYPE_CGROUP_SKB, BPF_CGROUP_INET_INGRESS},
{0, BPF_CGROUP_INET_INGRESS},
},
{
"cgroup_skb/egress",
- {0, BPF_PROG_TYPE_CGROUP_SKB, 0},
+ {0, BPF_PROG_TYPE_CGROUP_SKB, BPF_CGROUP_INET_EGRESS},
{0, BPF_CGROUP_INET_EGRESS},
},
{"cgroup/skb", {0, BPF_PROG_TYPE_CGROUP_SKB, 0}, {-EINVAL, 0} },
{
"cgroup/sock",
- {0, BPF_PROG_TYPE_CGROUP_SOCK, 0},
+ {0, BPF_PROG_TYPE_CGROUP_SOCK, BPF_CGROUP_INET_SOCK_CREATE},
{0, BPF_CGROUP_INET_SOCK_CREATE},
},
{
},
{
"cgroup/dev",
- {0, BPF_PROG_TYPE_CGROUP_DEVICE, 0},
+ {0, BPF_PROG_TYPE_CGROUP_DEVICE, BPF_CGROUP_DEVICE},
{0, BPF_CGROUP_DEVICE},
},
- {"sockops", {0, BPF_PROG_TYPE_SOCK_OPS, 0}, {0, BPF_CGROUP_SOCK_OPS} },
+ {
+ "sockops",
+ {0, BPF_PROG_TYPE_SOCK_OPS, BPF_CGROUP_SOCK_OPS},
+ {0, BPF_CGROUP_SOCK_OPS},
+ },
{
"sk_skb/stream_parser",
- {0, BPF_PROG_TYPE_SK_SKB, 0},
+ {0, BPF_PROG_TYPE_SK_SKB, BPF_SK_SKB_STREAM_PARSER},
{0, BPF_SK_SKB_STREAM_PARSER},
},
{
"sk_skb/stream_verdict",
- {0, BPF_PROG_TYPE_SK_SKB, 0},
+ {0, BPF_PROG_TYPE_SK_SKB, BPF_SK_SKB_STREAM_VERDICT},
{0, BPF_SK_SKB_STREAM_VERDICT},
},
{"sk_skb", {0, BPF_PROG_TYPE_SK_SKB, 0}, {-EINVAL, 0} },
- {"sk_msg", {0, BPF_PROG_TYPE_SK_MSG, 0}, {0, BPF_SK_MSG_VERDICT} },
- {"lirc_mode2", {0, BPF_PROG_TYPE_LIRC_MODE2, 0}, {0, BPF_LIRC_MODE2} },
+ {
+ "sk_msg",
+ {0, BPF_PROG_TYPE_SK_MSG, BPF_SK_MSG_VERDICT},
+ {0, BPF_SK_MSG_VERDICT},
+ },
+ {
+ "lirc_mode2",
+ {0, BPF_PROG_TYPE_LIRC_MODE2, BPF_LIRC_MODE2},
+ {0, BPF_LIRC_MODE2},
+ },
{
"flow_dissector",
- {0, BPF_PROG_TYPE_FLOW_DISSECTOR, 0},
+ {0, BPF_PROG_TYPE_FLOW_DISSECTOR, BPF_FLOW_DISSECTOR},
{0, BPF_FLOW_DISSECTOR},
},
{
&expected_attach_type);
CHECK(rc != test->expected_load.rc, "check_code",
- "prog: unexpected rc=%d for %s", rc, test->sec_name);
+ "prog: unexpected rc=%d for %s\n", rc, test->sec_name);
if (rc)
return;
CHECK(prog_type != test->expected_load.prog_type, "check_prog_type",
- "prog: unexpected prog_type=%d for %s",
+ "prog: unexpected prog_type=%d for %s\n",
prog_type, test->sec_name);
CHECK(expected_attach_type != test->expected_load.expected_attach_type,
- "check_attach_type", "prog: unexpected expected_attach_type=%d for %s",
+ "check_attach_type", "prog: unexpected expected_attach_type=%d for %s\n",
expected_attach_type, test->sec_name);
}
rc = libbpf_attach_type_by_name(test->sec_name, &attach_type);
CHECK(rc != test->expected_attach.rc, "check_ret",
- "attach: unexpected rc=%d for %s", rc, test->sec_name);
+ "attach: unexpected rc=%d for %s\n", rc, test->sec_name);
if (rc)
return;
CHECK(attach_type != test->expected_attach.attach_type,
- "check_attach_type", "attach: unexpected attach_type=%d for %s",
+ "check_attach_type", "attach: unexpected attach_type=%d for %s\n",
attach_type, test->sec_name);
}
char *CMD_ARGS[] = {"true", NULL};
-int heap_mprotect(void)
+#define GET_PAGE_ADDR(ADDR, PAGE_SIZE) \
+ (char *)(((unsigned long) (ADDR + PAGE_SIZE)) & ~(PAGE_SIZE-1))
+
+int stack_mprotect(void)
{
void *buf;
long sz;
if (sz < 0)
return sz;
- buf = memalign(sz, 2 * sz);
- if (buf == NULL)
- return -ENOMEM;
-
- ret = mprotect(buf, sz, PROT_READ | PROT_WRITE | PROT_EXEC);
- free(buf);
+ buf = alloca(sz * 3);
+ ret = mprotect(GET_PAGE_ADDR(buf, sz), sz,
+ PROT_READ | PROT_WRITE | PROT_EXEC);
return ret;
}
skel->bss->monitored_pid = getpid();
- err = heap_mprotect();
- if (CHECK(errno != EPERM, "heap_mprotect", "want errno=EPERM, got %d\n",
+ err = stack_mprotect();
+ if (CHECK(errno != EPERM, "stack_mprotect", "want err=EPERM, got %d\n",
errno))
goto close_prog;
void test_xdp_attach(void)
{
+ __u32 duration = 0, id1, id2, id0 = 0, len;
struct bpf_object *obj1, *obj2, *obj3;
const char *file = "./test_xdp.o";
+ struct bpf_prog_info info = {};
int err, fd1, fd2, fd3;
- __u32 duration = 0;
DECLARE_LIBBPF_OPTS(bpf_xdp_set_link_opts, opts,
.old_fd = -1);
+ len = sizeof(info);
+
err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj1, &fd1);
if (CHECK_FAIL(err))
return;
+ err = bpf_obj_get_info_by_fd(fd1, &info, &len);
+ if (CHECK_FAIL(err))
+ goto out_1;
+ id1 = info.id;
+
err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj2, &fd2);
if (CHECK_FAIL(err))
goto out_1;
+
+ memset(&info, 0, sizeof(info));
+ err = bpf_obj_get_info_by_fd(fd2, &info, &len);
+ if (CHECK_FAIL(err))
+ goto out_2;
+ id2 = info.id;
+
err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj3, &fd3);
if (CHECK_FAIL(err))
goto out_2;
if (CHECK(err, "load_ok", "initial load failed"))
goto out_close;
+ err = bpf_get_link_xdp_id(IFINDEX_LO, &id0, 0);
+ if (CHECK(err || id0 != id1, "id1_check",
+ "loaded prog id %u != id1 %u, err %d", id0, id1, err))
+ goto out_close;
+
err = bpf_set_link_xdp_fd_opts(IFINDEX_LO, fd2, XDP_FLAGS_REPLACE,
&opts);
if (CHECK(!err, "load_fail", "load with expected id didn't fail"))
err = bpf_set_link_xdp_fd_opts(IFINDEX_LO, fd2, 0, &opts);
if (CHECK(err, "replace_ok", "replace valid old_fd failed"))
goto out;
+ err = bpf_get_link_xdp_id(IFINDEX_LO, &id0, 0);
+ if (CHECK(err || id0 != id2, "id2_check",
+ "loaded prog id %u != id2 %u, err %d", id0, id2, err))
+ goto out_close;
err = bpf_set_link_xdp_fd_opts(IFINDEX_LO, fd3, 0, &opts);
if (CHECK(!err, "replace_fail", "replace invalid old_fd didn't fail"))
if (CHECK(err, "remove_ok", "remove valid old_fd failed"))
goto out;
+ err = bpf_get_link_xdp_id(IFINDEX_LO, &id0, 0);
+ if (CHECK(err || id0 != 0, "unload_check",
+ "loaded prog id %u != 0, err %d", id0, err))
+ goto out_close;
out:
bpf_set_link_xdp_fd(IFINDEX_LO, -1, 0);
out_close:
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/if_link.h>
+#include <test_progs.h>
+
+#define IFINDEX_LO 1
+
+void test_xdp_info(void)
+{
+ __u32 len = sizeof(struct bpf_prog_info), duration = 0, prog_id;
+ const char *file = "./xdp_dummy.o";
+ struct bpf_prog_info info = {};
+ struct bpf_object *obj;
+ int err, prog_fd;
+
+ /* Get prog_id for XDP_ATTACHED_NONE mode */
+
+ err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, 0);
+ if (CHECK(err, "get_xdp_none", "errno=%d\n", errno))
+ return;
+ if (CHECK(prog_id, "prog_id_none", "unexpected prog_id=%u\n", prog_id))
+ return;
+
+ err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, XDP_FLAGS_SKB_MODE);
+ if (CHECK(err, "get_xdp_none_skb", "errno=%d\n", errno))
+ return;
+ if (CHECK(prog_id, "prog_id_none_skb", "unexpected prog_id=%u\n",
+ prog_id))
+ return;
+
+ /* Setup prog */
+
+ err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj, &prog_fd);
+ if (CHECK_FAIL(err))
+ return;
+
+ err = bpf_obj_get_info_by_fd(prog_fd, &info, &len);
+ if (CHECK(err, "get_prog_info", "errno=%d\n", errno))
+ goto out_close;
+
+ err = bpf_set_link_xdp_fd(IFINDEX_LO, prog_fd, XDP_FLAGS_SKB_MODE);
+ if (CHECK(err, "set_xdp_skb", "errno=%d\n", errno))
+ goto out_close;
+
+ /* Get prog_id for single prog mode */
+
+ err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, 0);
+ if (CHECK(err, "get_xdp", "errno=%d\n", errno))
+ goto out;
+ if (CHECK(prog_id != info.id, "prog_id", "prog_id not available\n"))
+ goto out;
+
+ err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, XDP_FLAGS_SKB_MODE);
+ if (CHECK(err, "get_xdp_skb", "errno=%d\n", errno))
+ goto out;
+ if (CHECK(prog_id != info.id, "prog_id_skb", "prog_id not available\n"))
+ goto out;
+
+ err = bpf_get_link_xdp_id(IFINDEX_LO, &prog_id, XDP_FLAGS_DRV_MODE);
+ if (CHECK(err, "get_xdp_drv", "errno=%d\n", errno))
+ goto out;
+ if (CHECK(prog_id, "prog_id_drv", "unexpected prog_id=%u\n", prog_id))
+ goto out;
+
+out:
+ bpf_set_link_xdp_fd(IFINDEX_LO, -1, 0);
+out_close:
+ bpf_object__close(obj);
+}
int _version SEC("version") = 1;
+__attribute__ ((noinline))
+int do_bind(struct bpf_sock_addr *ctx)
+{
+ struct sockaddr_in sa = {};
+
+ sa.sin_family = AF_INET;
+ sa.sin_port = bpf_htons(0);
+ sa.sin_addr.s_addr = bpf_htonl(SRC_REWRITE_IP4);
+
+ if (bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa)) != 0)
+ return 0;
+
+ return 1;
+}
+
SEC("cgroup/connect4")
int connect_v4_prog(struct bpf_sock_addr *ctx)
{
struct bpf_sock_tuple tuple = {};
- struct sockaddr_in sa;
struct bpf_sock *sk;
/* Verify that new destination is available. */
ctx->user_ip4 = bpf_htonl(DST_REWRITE_IP4);
ctx->user_port = bpf_htons(DST_REWRITE_PORT4);
- /* Rewrite source. */
- memset(&sa, 0, sizeof(sa));
-
- sa.sin_family = AF_INET;
- sa.sin_port = bpf_htons(0);
- sa.sin_addr.s_addr = bpf_htonl(SRC_REWRITE_IP4);
-
- if (bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa)) != 0)
- return 0;
-
- return 1;
+ return do_bind(ctx) ? 1 : 0;
}
char _license[] SEC("license") = "GPL";
--- /dev/null
+#include <linux/stddef.h>
+#include <linux/ipv6.h>
+#include <linux/bpf.h>
+#include <linux/in.h>
+#include <sys/socket.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+
+SEC("freplace/do_bind")
+int new_do_bind(struct bpf_sock_addr *ctx)
+{
+ struct sockaddr_in sa = {};
+
+ bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa));
+ return 0;
+}
+
+char _license[] SEC("license") = "GPL";
return ret;
__u32 pid = bpf_get_current_pid_tgid() >> 32;
- int is_heap = 0;
+ int is_stack = 0;
- is_heap = (vma->vm_start >= vma->vm_mm->start_brk &&
- vma->vm_end <= vma->vm_mm->brk);
+ is_stack = (vma->vm_start <= vma->vm_mm->start_stack &&
+ vma->vm_end >= vma->vm_mm->start_stack);
- if (is_heap && monitored_pid == pid) {
+ if (is_stack && monitored_pid == pid) {
mprotect_count++;
ret = -EPERM;
}
BPF_ANNOTATE_KV_PAIR(btf_map, int, struct ipv_counts);
-struct dummy_tracepoint_args {
- unsigned long long pad;
- struct sock *sock;
-};
-
__attribute__((noinline))
-int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(void)
{
struct ipv_counts *counts;
int key = 0;
- if (!arg->sock)
- return 0;
-
counts = bpf_map_lookup_elem(&btf_map, &key);
if (!counts)
return 0;
}
__attribute__((noinline))
-int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(void)
{
- return test_long_fname_2(arg);
+ return test_long_fname_2();
}
SEC("dummy_tracepoint")
-int _dummy_tracepoint(struct dummy_tracepoint_args *arg)
+int _dummy_tracepoint(void *arg)
{
- return test_long_fname_1(arg);
+ return test_long_fname_1();
}
char _license[] SEC("license") = "GPL";
__type(value, struct ipv_counts);
} btf_map SEC(".maps");
-struct dummy_tracepoint_args {
- unsigned long long pad;
- struct sock *sock;
-};
-
__attribute__((noinline))
-int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(void)
{
struct ipv_counts *counts;
int key = 0;
- if (!arg->sock)
- return 0;
-
counts = bpf_map_lookup_elem(&btf_map, &key);
if (!counts)
return 0;
}
__attribute__((noinline))
-int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(void)
{
- return test_long_fname_2(arg);
+ return test_long_fname_2();
}
SEC("dummy_tracepoint")
-int _dummy_tracepoint(struct dummy_tracepoint_args *arg)
+int _dummy_tracepoint(void *arg)
{
- return test_long_fname_1(arg);
+ return test_long_fname_1();
}
char _license[] SEC("license") = "GPL";
.max_entries = 4,
};
-struct dummy_tracepoint_args {
- unsigned long long pad;
- struct sock *sock;
-};
-
__attribute__((noinline))
-int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(void)
{
struct ipv_counts *counts;
int key = 0;
- if (!arg->sock)
- return 0;
-
counts = bpf_map_lookup_elem(&btf_map, &key);
if (!counts)
return 0;
}
__attribute__((noinline))
-int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(void)
{
- return test_long_fname_2(arg);
+ return test_long_fname_2();
}
SEC("dummy_tracepoint")
-int _dummy_tracepoint(struct dummy_tracepoint_args *arg)
+int _dummy_tracepoint(void *arg)
{
- return test_long_fname_1(arg);
+ return test_long_fname_1();
}
char _license[] SEC("license") = "GPL";
.value_type_id = 1,
.max_entries = 4,
.btf_load_err = true,
- .err_str = "vlen != 0",
+ .err_str = "Invalid func linkage",
},
{
.result = REJECT
},
{
- "bounds check mixed 32bit and 64bit arithmatic. test1",
+ "bounds check mixed 32bit and 64bit arithmetic. test1",
.insns = {
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_MOV64_IMM(BPF_REG_1, -1),
.result = ACCEPT
},
{
- "bounds check mixed 32bit and 64bit arithmatic. test2",
+ "bounds check mixed 32bit and 64bit arithmetic. test2",
.insns = {
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_MOV64_IMM(BPF_REG_1, -1),
},
.result = ACCEPT,
},
+{
+ "store PTR_TO_STACK in R10 to array map using BPF_B",
+ .insns = {
+ /* Load pointer to map. */
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_ST_MEM(BPF_DW, BPF_REG_2, 0, 0),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 2),
+ BPF_EXIT_INSN(),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+ /* Copy R10 to R9. */
+ BPF_MOV64_REG(BPF_REG_9, BPF_REG_10),
+ /* Pollute other registers with unaligned values. */
+ BPF_MOV64_IMM(BPF_REG_2, -1),
+ BPF_MOV64_IMM(BPF_REG_3, -1),
+ BPF_MOV64_IMM(BPF_REG_4, -1),
+ BPF_MOV64_IMM(BPF_REG_5, -1),
+ BPF_MOV64_IMM(BPF_REG_6, -1),
+ BPF_MOV64_IMM(BPF_REG_7, -1),
+ BPF_MOV64_IMM(BPF_REG_8, -1),
+ /* Store both R9 and R10 with BPF_B and read back. */
+ BPF_STX_MEM(BPF_B, BPF_REG_1, BPF_REG_10, 0),
+ BPF_LDX_MEM(BPF_B, BPF_REG_2, BPF_REG_1, 0),
+ BPF_STX_MEM(BPF_B, BPF_REG_1, BPF_REG_9, 0),
+ BPF_LDX_MEM(BPF_B, BPF_REG_3, BPF_REG_1, 0),
+ /* Should read back as same value. */
+ BPF_JMP_REG(BPF_JEQ, BPF_REG_2, BPF_REG_3, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 1),
+ BPF_EXIT_INSN(),
+ BPF_MOV64_IMM(BPF_REG_0, 42),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map_array_48b = { 3 },
+ .result = ACCEPT,
+ .retval = 42,
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+},
BPF_EXIT_INSN(),
},
.fixup_map_hash_48b = { 3 },
+ .errstr_unpriv = "leaking pointer from stack off -8",
.errstr = "R0 invalid mem access 'inv'",
.result = REJECT,
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_SAMPLES=y
+CONFIG_SAMPLE_FTRACE_DIRECT=m
CONFIG_SAMPLE_TRACE_PRINTK=m
CONFIG_KALLSYMS_ALL=y
exit_unsupported
fi
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
do_reset() {
if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then
exit_unsupported
fi
+check_filter_file set_ftrace_filter
+
fail() { # msg
echo $1
exit_fail
exit_unsupported
fi
+check_filter_file set_ftrace_filter
+
disable_tracing
clear_trace
exit_unsupported
fi
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is function tracer not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
do_function_fork=1
exit_unsupported
fi
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is function tracer not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
do_function_fork=1
# description: ftrace - stacktrace filter command
# flags: instance
-[ ! -f set_ftrace_filter ] && exit_unsupported
+check_filter_file set_ftrace_filter
echo _do_fork:stacktrace >> set_ftrace_filter
#
# The triggers are set within the set_ftrace_filter file
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
do_reset() {
reset_ftrace_filter
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - function trace on module
-[ ! -f set_ftrace_filter ] && exit_unsupported
+check_filter_file set_ftrace_filter
: "mod: allows to filter a non exist function"
echo 'non_exist_func:mod:non_exist_module' > set_ftrace_filter
exit_unsupported;
fi
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
if [ ! -f function_profile_enabled ]; then
echo "function_profile_enabled not found, function profiling enabled?"
#
# The triggers are set within the set_ftrace_filter file
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
fail() { # mesg
echo $1
exit_unsupported
fi
+check_filter_file stack_trace_filter
+
echo > stack_trace_filter
echo 0 > stack_max_size
echo 1 > /proc/sys/kernel/stack_tracer_enabled
#
# The triggers are set within the set_ftrace_filter file
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
fail() { # mesg
echo $1
+check_filter_file() { # check filter file introduced by dynamic ftrace
+ if [ ! -f "$1" ]; then
+ echo "$1 not found? Is dynamic ftrace not set?"
+ exit_unsupported
+ fi
+}
clear_trace() { # reset trace output
echo > trace
echo 0 > events/kprobes/testprobe/enable
: "Confirm the arguments is recorded in given types correctly"
- ARGS=`grep "testprobe" trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
+ ARGS=`grep "testprobe" trace | head -n 1 | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
check_types $ARGS $width
: "Clear event for next loop"
[ -f kprobe_events ] || exit_unsupported # this is configurable
grep "function" available_tracers || exit_unsupported # this is configurable
+check_filter_file set_ftrace_filter
+
# prepare
echo nop > current_tracer
echo _do_fork > set_ftrace_filter
# SPDX-License-Identifier: GPL-2.0
-MOUNT_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null)
-MOUNT_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null)
-ifeq ($(MOUNT_LDLIBS),)
-MOUNT_LDLIBS := -lmount -I/usr/include/libmount
+VAR_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null)
+VAR_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null)
+ifeq ($(VAR_LDLIBS),)
+VAR_LDLIBS := -lmount -I/usr/include/libmount
endif
-CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(MOUNT_CFLAGS)
-LDLIBS += $(MOUNT_LDLIBS)
+CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS)
+LDLIBS += $(VAR_LDLIBS)
TEST_PROGS := gpio-mockup.sh
TEST_FILES := gpio-mockup-sysfs.sh
# SPDX-License-Identifier: GPL-2.0
CFLAGS := $(CFLAGS) -Wall -D_GNU_SOURCE
-LDLIBS := $(LDLIBS) -lm
+LDLIBS += -lm
uname_M := $(shell uname -m 2>/dev/null || echo not)
ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
for (kern_id = 0; kern_id < 256; kern_id++) {
ret = msgctl(kern_id, MSG_STAT, &ds);
if (ret < 0) {
- if (errno == -EINVAL)
+ if (errno == EINVAL)
continue;
printf("Failed to get stats for IPC queue with id %d\n",
kern_id);
{
# Make sure tests will time out if utility is available.
if [ -x /usr/bin/timeout ] ; then
- /usr/bin/timeout "$kselftest_timeout" "$1"
+ /usr/bin/timeout --foreground "$kselftest_timeout" "$1"
else
"$1"
fi
--- /dev/null
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# kselftest_deps.sh
+#
+# Checks for kselftest build dependencies on the build system.
+# Copyright (c) 2020 Shuah Khan <skhan@linuxfoundation.org>
+#
+#
+
+usage()
+{
+
+echo -e "Usage: $0 -[p] <compiler> [test_name]\n"
+echo -e "\tkselftest_deps.sh [-p] gcc"
+echo -e "\tkselftest_deps.sh [-p] gcc vm"
+echo -e "\tkselftest_deps.sh [-p] aarch64-linux-gnu-gcc"
+echo -e "\tkselftest_deps.sh [-p] aarch64-linux-gnu-gcc vm\n"
+echo "- Should be run in selftests directory in the kernel repo."
+echo "- Checks if Kselftests can be built/cross-built on a system."
+echo "- Parses all test/sub-test Makefile to find library dependencies."
+echo "- Runs compile test on a trivial C file with LDLIBS specified"
+echo " in the test Makefiles to identify missing library dependencies."
+echo "- Prints suggested target list for a system filtering out tests"
+echo " failed the build dependency check from the TARGETS in Selftests"
+echo " main Makefile when optional -p is specified."
+echo "- Prints pass/fail dependency check for each tests/sub-test."
+echo "- Prints pass/fail targets and libraries."
+echo "- Default: runs dependency checks on all tests."
+echo "- Optional test name can be specified to check dependencies for it."
+exit 1
+
+}
+
+# Start main()
+main()
+{
+
+base_dir=`pwd`
+# Make sure we're in the selftests top-level directory.
+if [ $(basename "$base_dir") != "selftests" ]; then
+ echo -e "\tPlease run $0 in"
+ echo -e "\ttools/testing/selftests directory ..."
+ exit 1
+fi
+
+print_targets=0
+
+while getopts "p" arg; do
+ case $arg in
+ p)
+ print_targets=1
+ shift;;
+ esac
+done
+
+if [ $# -eq 0 ]
+then
+ usage
+fi
+
+# Compiler
+CC=$1
+
+tmp_file=$(mktemp).c
+trap "rm -f $tmp_file.o $tmp_file $tmp_file.bin" EXIT
+#echo $tmp_file
+
+pass=$(mktemp).out
+trap "rm -f $pass" EXIT
+#echo $pass
+
+fail=$(mktemp).out
+trap "rm -f $fail" EXIT
+#echo $fail
+
+# Generate tmp source fire for compile test
+cat << "EOF" > $tmp_file
+int main()
+{
+}
+EOF
+
+# Save results
+total_cnt=0
+fail_trgts=()
+fail_libs=()
+fail_cnt=0
+pass_trgts=()
+pass_libs=()
+pass_cnt=0
+
+# Get all TARGETS from selftests Makefile
+targets=$(egrep "^TARGETS +|^TARGETS =" Makefile | cut -d "=" -f2)
+
+# Single test case
+if [ $# -eq 2 ]
+then
+ test=$2/Makefile
+
+ l1_test $test
+ l2_test $test
+ l3_test $test
+
+ print_results $1 $2
+ exit $?
+fi
+
+# Level 1: LDLIBS set static.
+#
+# Find all LDLIBS set statically for all executables built by a Makefile
+# and filter out VAR_LDLIBS to discard the following:
+# gpio/Makefile:LDLIBS += $(VAR_LDLIBS)
+# Append space at the end of the list to append more tests.
+
+l1_tests=$(grep -r --include=Makefile "^LDLIBS" | \
+ grep -v "VAR_LDLIBS" | awk -F: '{print $1}')
+
+# Level 2: LDLIBS set dynamically.
+#
+# Level 2
+# Some tests have multiple valid LDLIBS lines for individual sub-tests
+# that need dependency checks. Find them and append them to the tests
+# e.g: vm/Makefile:$(OUTPUT)/userfaultfd: LDLIBS += -lpthread
+# Filter out VAR_LDLIBS to discard the following:
+# memfd/Makefile:$(OUTPUT)/fuse_mnt: LDLIBS += $(VAR_LDLIBS)
+# Append space at the end of the list to append more tests.
+
+l2_tests=$(grep -r --include=Makefile ": LDLIBS" | \
+ grep -v "VAR_LDLIBS" | awk -F: '{print $1}')
+
+# Level 3
+# gpio, memfd and others use pkg-config to find mount and fuse libs
+# respectively and save it in VAR_LDLIBS. If pkg-config doesn't find
+# any, VAR_LDLIBS set to default.
+# Use the default value and filter out pkg-config for dependency check.
+# e.g:
+# gpio/Makefile
+# VAR_LDLIBS := $(shell pkg-config --libs mount) 2>/dev/null)
+# memfd/Makefile
+# VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null)
+
+l3_tests=$(grep -r --include=Makefile "^VAR_LDLIBS" | \
+ grep -v "pkg-config" | awk -F: '{print $1}')
+
+#echo $l1_tests
+#echo $l2_1_tests
+#echo $l3_tests
+
+all_tests
+print_results $1 $2
+
+exit $?
+}
+# end main()
+
+all_tests()
+{
+ for test in $l1_tests; do
+ l1_test $test
+ done
+
+ for test in $l2_tests; do
+ l2_test $test
+ done
+
+ for test in $l3_tests; do
+ l3_test $test
+ done
+}
+
+# Use same parsing used for l1_tests and pick libraries this time.
+l1_test()
+{
+ test_libs=$(grep --include=Makefile "^LDLIBS" $test | \
+ grep -v "VAR_LDLIBS" | \
+ sed -e 's/\:/ /' | \
+ sed -e 's/+/ /' | cut -d "=" -f 2)
+
+ check_libs $test $test_libs
+}
+
+# Use same parsing used for l2__tests and pick libraries this time.
+l2_test()
+{
+ test_libs=$(grep --include=Makefile ": LDLIBS" $test | \
+ grep -v "VAR_LDLIBS" | \
+ sed -e 's/\:/ /' | sed -e 's/+/ /' | \
+ cut -d "=" -f 2)
+
+ check_libs $test $test_libs
+}
+
+l3_test()
+{
+ test_libs=$(grep --include=Makefile "^VAR_LDLIBS" $test | \
+ grep -v "pkg-config" | sed -e 's/\:/ /' |
+ sed -e 's/+/ /' | cut -d "=" -f 2)
+
+ check_libs $test $test_libs
+}
+
+check_libs()
+{
+
+if [[ ! -z "${test_libs// }" ]]
+then
+
+ #echo $test_libs
+
+ for lib in $test_libs; do
+
+ let total_cnt+=1
+ $CC -o $tmp_file.bin $lib $tmp_file > /dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "FAIL: $test dependency check: $lib" >> $fail
+ let fail_cnt+=1
+ fail_libs+="$lib "
+ fail_target=$(echo "$test" | cut -d "/" -f1)
+ fail_trgts+="$fail_target "
+ targets=$(echo "$targets" | grep -v "$fail_target")
+ else
+ echo "PASS: $test dependency check passed $lib" >> $pass
+ let pass_cnt+=1
+ pass_libs+="$lib "
+ pass_trgts+="$(echo "$test" | cut -d "/" -f1) "
+ fi
+
+ done
+fi
+}
+
+print_results()
+{
+ echo -e "========================================================";
+ echo -e "Kselftest Dependency Check for [$0 $1 $2] results..."
+
+ if [ $print_targets -ne 0 ]
+ then
+ echo -e "Suggested Selftest Targets for your configuration:"
+ echo -e "$targets";
+ fi
+
+ echo -e "========================================================";
+ echo -e "Checked tests defining LDLIBS dependencies"
+ echo -e "--------------------------------------------------------";
+ echo -e "Total tests with Dependencies:"
+ echo -e "$total_cnt Pass: $pass_cnt Fail: $fail_cnt";
+
+ if [ $pass_cnt -ne 0 ]; then
+ echo -e "--------------------------------------------------------";
+ cat $pass
+ echo -e "--------------------------------------------------------";
+ echo -e "Targets passed build dependency check on system:"
+ echo -e "$(echo "$pass_trgts" | xargs -n1 | sort -u | xargs)"
+ fi
+
+ if [ $fail_cnt -ne 0 ]; then
+ echo -e "--------------------------------------------------------";
+ cat $fail
+ echo -e "--------------------------------------------------------";
+ echo -e "Targets failed build dependency check on system:"
+ echo -e "$(echo "$fail_trgts" | xargs -n1 | sort -u | xargs)"
+ echo -e "--------------------------------------------------------";
+ echo -e "Missing libraries system"
+ echo -e "$(echo "$fail_libs" | xargs -n1 | sort -u | xargs)"
+ fi
+
+ echo -e "--------------------------------------------------------";
+ echo -e "========================================================";
+}
+
+main "$@"
/* Sanity check handler execution environment. */
if (!t) {
fprintf(TH_LOG_STREAM,
- "no active test in SIGARLM handler!?\n");
+ "no active test in SIGALRM handler!?\n");
abort();
}
if (sig != SIGALRM || sig != info->si_signo) {
if (sigaction(SIGALRM, &action, &saved_action)) {
t->passed = 0;
fprintf(TH_LOG_STREAM,
- "%s: unable to install SIGARLM handler\n",
+ "%s: unable to install SIGALRM handler\n",
t->name);
return;
}
if (sigaction(SIGALRM, &saved_action, NULL)) {
t->passed = 0;
fprintf(TH_LOG_STREAM,
- "%s: unable to uninstall SIGARLM handler\n",
+ "%s: unable to uninstall SIGALRM handler\n",
t->name);
return;
}
CFLAGS += -I../../../../include/
CFLAGS += -I../../../../usr/include/
-TEST_GEN_PROGS := memfd_test fuse_test fuse_mnt
+TEST_GEN_PROGS := memfd_test
TEST_PROGS := run_fuse_test.sh run_hugetlbfs_test.sh
+TEST_GEN_FILES := fuse_test fuse_mnt
-fuse_mnt.o: CFLAGS += $(shell pkg-config fuse --cflags)
+VAR_CFLAGS := $(shell pkg-config fuse --cflags 2>/dev/null)
+ifeq ($(VAR_CFLAGS),)
+VAR_CFLAGS := -D_FILE_OFFSET_BITS=64 -I/usr/include/fuse
+endif
+
+VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null)
+ifeq ($(VAR_LDLIBS),)
+VAR_LDLIBS := -lfuse -pthread
+endif
+
+fuse_mnt.o: CFLAGS += $(VAR_CFLAGS)
include ../lib.mk
-$(OUTPUT)/fuse_mnt: LDLIBS += $(shell pkg-config fuse --libs)
+$(OUTPUT)/fuse_mnt: LDLIBS += $(VAR_LDLIBS)
$(OUTPUT)/memfd_test: memfd_test.c common.c
$(OUTPUT)/fuse_test: fuse_test.c common.c
run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
log_test $? 0 "Ping - multipath"
+ run_cmd "$IP ro delete 172.16.101.1/32 nhid 122"
+
+ #
+ # multiple default routes
+ # - tests fib_select_default
+ run_cmd "$IP nexthop add id 501 via 172.16.1.2 dev veth1"
+ run_cmd "$IP ro add default nhid 501"
+ run_cmd "$IP ro add default via 172.16.1.3 dev veth1 metric 20"
+ run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+ log_test $? 0 "Ping - multiple default routes, nh first"
+
+ # flip the order
+ run_cmd "$IP ro del default nhid 501"
+ run_cmd "$IP ro del default via 172.16.1.3 dev veth1 metric 20"
+ run_cmd "$IP ro add default via 172.16.1.2 dev veth1 metric 20"
+ run_cmd "$IP nexthop replace id 501 via 172.16.1.3 dev veth1"
+ run_cmd "$IP ro add default nhid 501 metric 20"
+ run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+ log_test $? 0 "Ping - multiple default routes, nh second"
+
+ run_cmd "$IP nexthop delete nhid 501"
+ run_cmd "$IP ro del default"
+
#
# IPv4 with blackhole nexthops
#
fib_suppress_test()
{
+ echo
+ echo "FIB rule with suppress_prefixlength"
+ setup
+
$IP link add dummy1 type dummy
$IP link set dummy1 up
$IP -6 route add default dev dummy1
$IP -6 rule add table main suppress_prefixlength 0
- ping -f -c 1000 -W 1 1234::1 || true
+ ping -f -c 1000 -W 1 1234::1 >/dev/null 2>&1
$IP -6 rule del table main suppress_prefixlength 0
$IP link del dummy1
# If we got here without crashing, we're good.
- return 0
+ log_test 0 0 "FIB rule suppress test"
+
+ cleanup
}
################################################################################
offsetof(struct seccomp_data, nr)),
#ifdef __NR_sigreturn
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_sigreturn, 6, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_sigreturn, 7, 0),
#endif
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_read, 5, 0),
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_exit, 4, 0),
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_rt_sigreturn, 3, 0),
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_nanosleep, 4, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_read, 6, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_exit, 5, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_rt_sigreturn, 4, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_nanosleep, 5, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_clock_nanosleep, 4, 0),
BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_restart_syscall, 4, 0),
/* Allow __NR_write for easy logging. */
ASSERT_EQ(PTRACE_EVENT_SECCOMP, (status >> 16));
ASSERT_EQ(0, ptrace(PTRACE_GETEVENTMSG, child_pid, NULL, &msg));
ASSERT_EQ(0x100, msg);
- EXPECT_EQ(__NR_nanosleep, get_syscall(_metadata, child_pid));
+ ret = get_syscall(_metadata, child_pid);
+ EXPECT_TRUE(ret == __NR_nanosleep || ret == __NR_clock_nanosleep);
/* Might as well check siginfo for sanity while we're here. */
ASSERT_EQ(0, ptrace(PTRACE_GETSIGINFO, child_pid, NULL, &info));
exit(0)
if args.list:
- if args.list:
- list_test_cases(alltests)
- exit(0)
+ list_test_cases(alltests)
+ exit(0)
if len(alltests):
req_plugins = pm.get_required_plugins(alltests)
#!/bin/bash
# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
-self.flags = flags
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-
-if [ -f /dev/tpm0 ] ; then
- python -m unittest -v tpm2_tests.SmokeTest
- python -m unittest -v tpm2_tests.AsyncTest
-else
- exit $ksft_skip
-fi
+python -m unittest -v tpm2_tests.SmokeTest
+python -m unittest -v tpm2_tests.AsyncTest
CLEAR_CMD=$(which tpm2_clear)
if [ -n $CLEAR_CMD ]; then
#!/bin/bash
# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-if [ -f /dev/tpmrm0 ] ; then
- python -m unittest -v tpm2_tests.SpaceTest
-else
- exit $ksft_skip
-fi
+python -m unittest -v tpm2_tests.SpaceTest
# SPDX-License-Identifier: GPL-2.0
# Makefile for vm selftests
uname_M := $(shell uname -m 2>/dev/null || echo not)
-ARCH ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/')
+MACHINE ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/')
CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
LDLIBS = -lrt
TEST_GEN_FILES += transhuge-stress
TEST_GEN_FILES += userfaultfd
-ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64))
+ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64))
TEST_GEN_FILES += va_128TBswitch
TEST_GEN_FILES += virtual_address_range
TEST_GEN_FILES += write_to_hugetlbfs
fi
#filter 64bit architectures
-ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64"
+ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
if [ -z $ARCH ]; then
ARCH=`uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/'`
fi
virtio_test: virtio_ring.o virtio_test.o
vringh_test: vringh_test.o vringh.o virtio_ring.o
-CFLAGS += -g -O2 -Werror -Wall -I. -I../include/ -I ../../usr/include/ -Wno-pointer-sign -fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE
+CFLAGS += -g -O2 -Werror -Wall -I. -I../include/ -I ../../usr/include/ -Wno-pointer-sign -fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE -include ../../include/linux/kconfig.h
vpath %.c ../../drivers/virtio ../../drivers/vhost
mod:
${MAKE} -C `pwd`/../.. M=`pwd`/vhost_test V=${V}
CONFIG_VHOST=m \
CONFIG_VHOST_NET=n \
CONFIG_VHOST_SCSI=n \
- CONFIG_VHOST_VSOCK=n
+ CONFIG_VHOST_VSOCK=n \
+ CONFIG_VHOST_RING=n
OOT_BUILD=KCFLAGS="-I "${OOT_VHOST} ${MAKE} -C ${OOT_KSRC} V=${V}
oot-build:
echo "UNSUPPORTED! Don't use the resulting modules in production!"
/* SPDX-License-Identifier: GPL-2.0 */
+#include <stdlib.h>
#if defined(__i386__) || defined(__x86_64__)
#define barrier() asm volatile("" ::: "memory")
#define virt_mb() __sync_synchronize()
#define READ_ONCE(var) (*((volatile typeof(var) *)(&(var))))
+#define __aligned(x) __attribute((__aligned__(x)))
#endif
# SPDX-License-Identifier: GPL-2.0
# Makefile for vm tools
#
+include ../scripts/Makefile.include
+
TARGETS=page-types slabinfo page_owner_sort
LIB_DIR = ../lib/api
OSDN Git Service
