--- /dev/null
+ GNU LESSER GENERAL PUBLIC LICENSE
+ Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+ This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+ 0. Additional Definitions.
+
+ As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+ "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+ An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+ A "Combined Work" is a work produced by combining or linking an
+Application with the Library. The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+ The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+ The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+ 1. Exception to Section 3 of the GNU GPL.
+
+ You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+ 2. Conveying Modified Versions.
+
+ If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+ a) under this License, provided that you make a good faith effort to
+ ensure that, in the event an Application does not supply the
+ function or data, the facility still operates, and performs
+ whatever part of its purpose remains meaningful, or
+
+ b) under the GNU GPL, with none of the additional permissions of
+ this License applicable to that copy.
+
+ 3. Object Code Incorporating Material from Library Header Files.
+
+ The object code form of an Application may incorporate material from
+a header file that is part of the Library. You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+ a) Give prominent notice with each copy of the object code that the
+ Library is used in it and that the Library and its use are
+ covered by this License.
+
+ b) Accompany the object code with a copy of the GNU GPL and this license
+ document.
+
+ 4. Combined Works.
+
+ You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+ a) Give prominent notice with each copy of the Combined Work that
+ the Library is used in it and that the Library and its use are
+ covered by this License.
+
+ b) Accompany the Combined Work with a copy of the GNU GPL and this license
+ document.
+
+ c) For a Combined Work that displays copyright notices during
+ execution, include the copyright notice for the Library among
+ these notices, as well as a reference directing the user to the
+ copies of the GNU GPL and this license document.
+
+ d) Do one of the following:
+
+ 0) Convey the Minimal Corresponding Source under the terms of this
+ License, and the Corresponding Application Code in a form
+ suitable for, and under terms that permit, the user to
+ recombine or relink the Application with a modified version of
+ the Linked Version to produce a modified Combined Work, in the
+ manner specified by section 6 of the GNU GPL for conveying
+ Corresponding Source.
+
+ 1) Use a suitable shared library mechanism for linking with the
+ Library. A suitable mechanism is one that (a) uses at run time
+ a copy of the Library already present on the user's computer
+ system, and (b) will operate properly with a modified version
+ of the Library that is interface-compatible with the Linked
+ Version.
+
+ e) Provide Installation Information, but only if you would otherwise
+ be required to provide such information under section 6 of the
+ GNU GPL, and only to the extent that such information is
+ necessary to install and execute a modified version of the
+ Combined Work produced by recombining or relinking the
+ Application with a modified version of the Linked Version. (If
+ you use option 4d0, the Installation Information must accompany
+ the Minimal Corresponding Source and Corresponding Application
+ Code. If you use option 4d1, you must provide the Installation
+ Information in the manner specified by section 6 of the GNU GPL
+ for conveying Corresponding Source.)
+
+ 5. Combined Libraries.
+
+ You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+ a) Accompany the combined library with a copy of the same work based
+ on the Library, uncombined with any other library facilities,
+ conveyed under the terms of this License.
+
+ b) Give prominent notice with the combined library that part of it
+ is a work based on the Library, and explaining where to find the
+ accompanying uncombined form of the same work.
+
+ 6. Revised Versions of the GNU Lesser General Public License.
+
+ The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+ Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+ If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.
--- /dev/null
+SUBDIRS = src
+
+EXTRA_DIST = LICENSE
+
--- /dev/null
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(top_srcdir)/configure depcomp install-sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir dist dist-all distcheck
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d "$(distdir)" \
+ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr "$(distdir)"; }; }
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = src
+EXTRA_DIST = LICENSE
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+ @if test ! -f $@; then \
+ rm -f stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+ else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-lzma: distdir
+ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+ $(am__remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lzma*) \
+ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @$(am__cd) '$(distuninstallcheck_dir)' \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+ ctags-recursive install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-generic \
+ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+ dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+ distclean distclean-generic distclean-hdr distclean-tags \
+ distcleancheck distdir distuninstallcheck dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+
+MPEG-2 TSを解析しTS内に含まれている情報等を取得するツールです。
+
+本パッケージに含まれているソースコードの
+・aribstr.cpp
+・aribstr.h
+は、tomy氏作成の「epgdumpr2」から流用および改変したものです。
+
+
+ライセンスについて
+ソースコードを流用している「epgdumpr2」のライセンスがLGPLと
+いうことなので、本パッケージもLGPLv3に準拠します。
+
+
--- /dev/null
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
+[m4_warning([this file was generated for autoconf 2.65.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
--- /dev/null
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the `alarm' function. */
+#undef HAVE_ALARM
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if stdbool.h conforms to C99. */
+#undef HAVE_STDBOOL_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if the system has the type `_Bool'. */
+#undef HAVE__BOOL
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Version number of package */
+#undef VERSION
+
+/* Define for Solaris 2.5.1 so the uint32_t typedef from <sys/synch.h>,
+ <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
+ #define below would cause a syntax error. */
+#undef _UINT32_T
+
+/* Define for Solaris 2.5.1 so the uint8_t typedef from <sys/synch.h>,
+ <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
+ #define below would cause a syntax error. */
+#undef _UINT8_T
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+ calls it, or to nothing if 'inline' is not supported under any name. */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to the type of a signed integer type of width exactly 16 bits if
+ such a type exists and the standard includes do not define it. */
+#undef int16_t
+
+/* Define to the type of a signed integer type of width exactly 32 bits if
+ such a type exists and the standard includes do not define it. */
+#undef int32_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef ssize_t
+
+/* Define to the type of an unsigned integer type of width exactly 16 bits if
+ such a type exists and the standard includes do not define it. */
+#undef uint16_t
+
+/* Define to the type of an unsigned integer type of width exactly 32 bits if
+ such a type exists and the standard includes do not define it. */
+#undef uint32_t
+
+/* Define to the type of an unsigned integer type of width exactly 8 bits if
+ such a type exists and the standard includes do not define it. */
+#undef uint8_t
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.65 for tsparser 20110219.
+#
+# Report bugs to <koukou@users.sourceforge.jp>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: koukou@users.sourceforge.jp about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='tsparser'
+PACKAGE_TARNAME='tsparser'
+PACKAGE_VERSION='20110219'
+PACKAGE_STRING='tsparser 20110219'
+PACKAGE_BUGREPORT='koukou@users.sourceforge.jp'
+PACKAGE_URL=''
+
+ac_unique_file="src/tsparser.cpp"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_header_list=
+ac_func_list=
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+EGREP
+GREP
+CPP
+RANLIB
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+ac_ct_CC
+CFLAGS
+CC
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CXX
+CPPFLAGS
+LDFLAGS
+CXXFLAGS
+CXX
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CXX
+CXXFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CCC
+CC
+CFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures tsparser 20110219 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/tsparser]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of tsparser 20110219:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+
+Some influential environment variables:
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CC C compiler command
+ CFLAGS C compiler flags
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <koukou@users.sourceforge.jp>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+tsparser configure 20110219
+generated by GNU Autoconf 2.65
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( cat <<\_ASBOX
+## ------------------------------------------ ##
+## Report this to koukou@users.sourceforge.jp ##
+## ------------------------------------------ ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_find_intX_t LINENO BITS VAR
+# -----------------------------------
+# Finds a signed integer type with width BITS, setting cache variable VAR
+# accordingly.
+ac_fn_c_find_intX_t ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5
+$as_echo_n "checking for int$2_t... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ # Order is important - never check a type that is potentially smaller
+ # than half of the expected target width.
+ for ac_type in int$2_t 'int' 'long int' \
+ 'long long int' 'short int' 'signed char'; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+ enum { N = $2 / 2 - 1 };
+int
+main ()
+{
+static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+ enum { N = $2 / 2 - 1 };
+int
+main ()
+{
+static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1)
+ < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ case $ac_type in #(
+ int$2_t) :
+ eval "$3=yes" ;; #(
+ *) :
+ eval "$3=\$ac_type" ;;
+esac
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ eval as_val=\$$3
+ if test "x$as_val" = x""no; then :
+
+else
+ break
+fi
+ done
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_find_intX_t
+
+# ac_fn_c_find_uintX_t LINENO BITS VAR
+# ------------------------------------
+# Finds an unsigned integer type with width BITS, setting cache variable VAR
+# accordingly.
+ac_fn_c_find_uintX_t ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5
+$as_echo_n "checking for uint$2_t... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ # Order is important - never check a type that is potentially smaller
+ # than half of the expected target width.
+ for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \
+ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ case $ac_type in #(
+ uint$2_t) :
+ eval "$3=yes" ;; #(
+ *) :
+ eval "$3=\$ac_type" ;;
+esac
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ eval as_val=\$$3
+ if test "x$as_val" = x""no; then :
+
+else
+ break
+fi
+ done
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_find_uintX_t
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by tsparser $as_me 20110219, which was
+generated by GNU Autoconf 2.65. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+as_fn_append ac_header_list " sys/time.h"
+as_fn_append ac_header_list " unistd.h"
+as_fn_append ac_func_list " alarm"
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+am__api_version='1.11'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ for ac_t in install-sh install.sh shtool; do
+ if test -f "$ac_dir/$ac_t"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/$ac_t -c"
+ break 2
+ fi
+ done
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error "ls -t appears to fail. Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='tsparser'
+ VERSION='20110219'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+# Checks for programs.
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+ if test -n "$CCC"; then
+ CXX=$CCC
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CXX+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CXX" && break
+done
+
+ if test "x$ac_ct_CXX" = x; then
+ CXX="g++"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CXX=$ac_ct_CXX
+ fi
+fi
+
+ fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5
+$as_echo_n "checking whether the C++ compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "C++ compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5
+$as_echo_n "checking for C++ compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot run C++ compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if test "${ac_cv_prog_cxx_g+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+ ac_cxx_werror_flag=yes
+ ac_cv_prog_cxx_g=no
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+else
+ CXXFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CXX" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+ am__fastdepCXX_TRUE=
+ am__fastdepCXX_FALSE='#'
+else
+ am__fastdepCXX_TRUE='#'
+ am__fastdepCXX_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+
+# Checks for libraries.
+
+# Checks for header files.
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in fcntl.h inttypes.h stdlib.h string.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5
+$as_echo_n "checking for stdbool.h that conforms to C99... " >&6; }
+if test "${ac_cv_header_stdbool_h+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <stdbool.h>
+#ifndef bool
+ "error: bool is not defined"
+#endif
+#ifndef false
+ "error: false is not defined"
+#endif
+#if false
+ "error: false is not 0"
+#endif
+#ifndef true
+ "error: true is not defined"
+#endif
+#if true != 1
+ "error: true is not 1"
+#endif
+#ifndef __bool_true_false_are_defined
+ "error: __bool_true_false_are_defined is not defined"
+#endif
+
+ struct s { _Bool s: 1; _Bool t; } s;
+
+ char a[true == 1 ? 1 : -1];
+ char b[false == 0 ? 1 : -1];
+ char c[__bool_true_false_are_defined == 1 ? 1 : -1];
+ char d[(bool) 0.5 == true ? 1 : -1];
+ bool e = &s;
+ char f[(_Bool) 0.0 == false ? 1 : -1];
+ char g[true];
+ char h[sizeof (_Bool)];
+ char i[sizeof s.t];
+ enum { j = false, k = true, l = false * true, m = true * 256 };
+ /* The following fails for
+ HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */
+ _Bool n[m];
+ char o[sizeof n == m * sizeof n[0] ? 1 : -1];
+ char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1];
+# if defined __xlc__ || defined __GNUC__
+ /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0
+ reported by James Lemley on 2005-10-05; see
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html
+ This test is not quite right, since xlc is allowed to
+ reject this program, as the initializer for xlcbug is
+ not one of the forms that C requires support for.
+ However, doing the test right would require a runtime
+ test, and that would make cross-compilation harder.
+ Let us hope that IBM fixes the xlc bug, and also adds
+ support for this kind of constant expression. In the
+ meantime, this test will reject xlc, which is OK, since
+ our stdbool.h substitute should suffice. We also test
+ this with GCC, where it should work, to detect more
+ quickly whether someone messes up the test in the
+ future. */
+ char digs[] = "0123456789";
+ int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1);
+# endif
+ /* Catch a bug in an HP-UX C compiler. See
+ http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
+ */
+ _Bool q = true;
+ _Bool *pq = &q;
+
+int
+main ()
+{
+
+ *pq |= q;
+ *pq |= ! q;
+ /* Refer to every declared value, to avoid compiler optimizations. */
+ return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l
+ + !m + !n + !o + !p + !q + !pq);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdbool_h=yes
+else
+ ac_cv_header_stdbool_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5
+$as_echo "$ac_cv_header_stdbool_h" >&6; }
+ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default"
+if test "x$ac_cv_type__Bool" = x""yes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE__BOOL 1
+_ACEOF
+
+
+fi
+
+if test $ac_cv_header_stdbool_h = yes; then
+
+$as_echo "#define HAVE_STDBOOL_H 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
+$as_echo_n "checking for inline... " >&6; }
+if test "${ac_cv_c_inline+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_inline=$ac_kw
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ test "$ac_cv_c_inline" != no && break
+done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
+$as_echo "$ac_cv_c_inline" >&6; }
+
+case $ac_cv_c_inline in
+ inline | yes) ;;
+ *)
+ case $ac_cv_c_inline in
+ no) ac_val=;;
+ *) ac_val=$ac_cv_c_inline;;
+ esac
+ cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+ ;;
+esac
+
+ac_fn_c_find_intX_t "$LINENO" "16" "ac_cv_c_int16_t"
+case $ac_cv_c_int16_t in #(
+ no|yes) ;; #(
+ *)
+
+cat >>confdefs.h <<_ACEOF
+#define int16_t $ac_cv_c_int16_t
+_ACEOF
+;;
+esac
+
+ac_fn_c_find_intX_t "$LINENO" "32" "ac_cv_c_int32_t"
+case $ac_cv_c_int32_t in #(
+ no|yes) ;; #(
+ *)
+
+cat >>confdefs.h <<_ACEOF
+#define int32_t $ac_cv_c_int32_t
+_ACEOF
+;;
+esac
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = x""yes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default"
+if test "x$ac_cv_type_ssize_t" = x""yes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define ssize_t int
+_ACEOF
+
+fi
+
+ac_fn_c_find_uintX_t "$LINENO" "16" "ac_cv_c_uint16_t"
+case $ac_cv_c_uint16_t in #(
+ no|yes) ;; #(
+ *)
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint16_t $ac_cv_c_uint16_t
+_ACEOF
+;;
+ esac
+
+ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t"
+case $ac_cv_c_uint32_t in #(
+ no|yes) ;; #(
+ *)
+
+$as_echo "#define _UINT32_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint32_t $ac_cv_c_uint32_t
+_ACEOF
+;;
+ esac
+
+ac_fn_c_find_uintX_t "$LINENO" "8" "ac_cv_c_uint8_t"
+case $ac_cv_c_uint8_t in #(
+ no|yes) ;; #(
+ *)
+
+$as_echo "#define _UINT8_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint8_t $ac_cv_c_uint8_t
+_ACEOF
+;;
+ esac
+
+
+# Checks for library functions.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
+if test "${ac_cv_header_time+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_time=yes
+else
+ ac_cv_header_time=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
+$as_echo "$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
+
+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
+
+fi
+
+
+
+
+ for ac_header in $ac_header_list
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+
+
+
+ for ac_func in $ac_func_list
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mktime" >&5
+$as_echo_n "checking for working mktime... " >&6; }
+if test "${ac_cv_func_working_mktime+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_working_mktime=no
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Test program from Paul Eggert and Tony Leneis. */
+#ifdef TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+#else
+# ifdef HAVE_SYS_TIME_H
+# include <sys/time.h>
+# else
+# include <time.h>
+# endif
+#endif
+
+#include <limits.h>
+#include <stdlib.h>
+
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+#ifndef HAVE_ALARM
+# define alarm(X) /* empty */
+#endif
+
+/* Work around redefinition to rpl_putenv by other config tests. */
+#undef putenv
+
+static time_t time_t_max;
+static time_t time_t_min;
+
+/* Values we'll use to set the TZ environment variable. */
+static char *tz_strings[] = {
+ (char *) 0, "TZ=GMT0", "TZ=JST-9",
+ "TZ=EST+3EDT+2,M10.1.0/00:00:00,M2.3.0/00:00:00"
+};
+#define N_STRINGS (sizeof (tz_strings) / sizeof (tz_strings[0]))
+
+/* Return 0 if mktime fails to convert a date in the spring-forward gap.
+ Based on a problem report from Andreas Jaeger. */
+static int
+spring_forward_gap ()
+{
+ /* glibc (up to about 1998-10-07) failed this test. */
+ struct tm tm;
+
+ /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
+ instead of "TZ=America/Vancouver" in order to detect the bug even
+ on systems that don't support the Olson extension, or don't have the
+ full zoneinfo tables installed. */
+ putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
+
+ tm.tm_year = 98;
+ tm.tm_mon = 3;
+ tm.tm_mday = 5;
+ tm.tm_hour = 2;
+ tm.tm_min = 0;
+ tm.tm_sec = 0;
+ tm.tm_isdst = -1;
+ return mktime (&tm) != (time_t) -1;
+}
+
+static int
+mktime_test1 (now)
+ time_t now;
+{
+ struct tm *lt;
+ return ! (lt = localtime (&now)) || mktime (lt) == now;
+}
+
+static int
+mktime_test (now)
+ time_t now;
+{
+ return (mktime_test1 (now)
+ && mktime_test1 ((time_t) (time_t_max - now))
+ && mktime_test1 ((time_t) (time_t_min + now)));
+}
+
+static int
+irix_6_4_bug ()
+{
+ /* Based on code from Ariel Faigon. */
+ struct tm tm;
+ tm.tm_year = 96;
+ tm.tm_mon = 3;
+ tm.tm_mday = 0;
+ tm.tm_hour = 0;
+ tm.tm_min = 0;
+ tm.tm_sec = 0;
+ tm.tm_isdst = -1;
+ mktime (&tm);
+ return tm.tm_mon == 2 && tm.tm_mday == 31;
+}
+
+static int
+bigtime_test (j)
+ int j;
+{
+ struct tm tm;
+ time_t now;
+ tm.tm_year = tm.tm_mon = tm.tm_mday = tm.tm_hour = tm.tm_min = tm.tm_sec = j;
+ now = mktime (&tm);
+ if (now != (time_t) -1)
+ {
+ struct tm *lt = localtime (&now);
+ if (! (lt
+ && lt->tm_year == tm.tm_year
+ && lt->tm_mon == tm.tm_mon
+ && lt->tm_mday == tm.tm_mday
+ && lt->tm_hour == tm.tm_hour
+ && lt->tm_min == tm.tm_min
+ && lt->tm_sec == tm.tm_sec
+ && lt->tm_yday == tm.tm_yday
+ && lt->tm_wday == tm.tm_wday
+ && ((lt->tm_isdst < 0 ? -1 : 0 < lt->tm_isdst)
+ == (tm.tm_isdst < 0 ? -1 : 0 < tm.tm_isdst))))
+ return 0;
+ }
+ return 1;
+}
+
+static int
+year_2050_test ()
+{
+ /* The correct answer for 2050-02-01 00:00:00 in Pacific time,
+ ignoring leap seconds. */
+ unsigned long int answer = 2527315200UL;
+
+ struct tm tm;
+ time_t t;
+ tm.tm_year = 2050 - 1900;
+ tm.tm_mon = 2 - 1;
+ tm.tm_mday = 1;
+ tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
+ tm.tm_isdst = -1;
+
+ /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
+ instead of "TZ=America/Vancouver" in order to detect the bug even
+ on systems that don't support the Olson extension, or don't have the
+ full zoneinfo tables installed. */
+ putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
+
+ t = mktime (&tm);
+
+ /* Check that the result is either a failure, or close enough
+ to the correct answer that we can assume the discrepancy is
+ due to leap seconds. */
+ return (t == (time_t) -1
+ || (0 < t && answer - 120 <= t && t <= answer + 120));
+}
+
+int
+main ()
+{
+ time_t t, delta;
+ int i, j;
+
+ /* This test makes some buggy mktime implementations loop.
+ Give up after 60 seconds; a mktime slower than that
+ isn't worth using anyway. */
+ alarm (60);
+
+ for (;;)
+ {
+ t = (time_t_max << 1) + 1;
+ if (t <= time_t_max)
+ break;
+ time_t_max = t;
+ }
+ time_t_min = - ((time_t) ~ (time_t) 0 == (time_t) -1) - time_t_max;
+
+ delta = time_t_max / 997; /* a suitable prime number */
+ for (i = 0; i < N_STRINGS; i++)
+ {
+ if (tz_strings[i])
+ putenv (tz_strings[i]);
+
+ for (t = 0; t <= time_t_max - delta; t += delta)
+ if (! mktime_test (t))
+ return 1;
+ if (! (mktime_test ((time_t) 1)
+ && mktime_test ((time_t) (60 * 60))
+ && mktime_test ((time_t) (60 * 60 * 24))))
+ return 1;
+
+ for (j = 1; ; j <<= 1)
+ if (! bigtime_test (j))
+ return 1;
+ else if (INT_MAX / 2 < j)
+ break;
+ if (! bigtime_test (INT_MAX))
+ return 1;
+ }
+ return ! (irix_6_4_bug () && spring_forward_gap () && year_2050_test ());
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_working_mktime=yes
+else
+ ac_cv_func_working_mktime=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_working_mktime" >&5
+$as_echo "$ac_cv_func_working_mktime" >&6; }
+if test $ac_cv_func_working_mktime = no; then
+ case " $LIBOBJS " in
+ *" mktime.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS mktime.$ac_objext"
+ ;;
+esac
+
+fi
+
+for ac_func in memmove memset
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+ac_config_files="$ac_config_files Makefile src/ARIB/Makefile src/Makefile src/TS/Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ as_fn_error "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by tsparser $as_me 20110219, which was
+generated by GNU Autoconf 2.65. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <koukou@users.sourceforge.jp>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+tsparser config.status 20110219
+configured by $0, generated by GNU Autoconf 2.65,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "src/ARIB/Makefile") CONFIG_FILES="$CONFIG_FILES src/ARIB/Makefile" ;;
+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+ "src/TS/Makefile") CONFIG_FILES="$CONFIG_FILES src/TS/Makefile" ;;
+
+ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = "\a"
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+ || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_t"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = "\a"
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+ } >"$tmp/config.h" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$tmp/config.h" "$ac_file" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit $?
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
--- /dev/null
+# -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ([2.65])
+AC_INIT([tsparser], [20110219], [koukou@users.sourceforge.jp])
+AM_INIT_AUTOMAKE([foreign])
+AC_CONFIG_SRCDIR([src/tsparser.cpp])
+AC_CONFIG_HEADERS([config.h])
+
+# Checks for programs.
+AC_PROG_CXX
+AC_PROG_CC
+AC_PROG_RANLIB
+
+# Checks for libraries.
+
+# Checks for header files.
+AC_CHECK_HEADERS([fcntl.h inttypes.h stdlib.h string.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_HEADER_STDBOOL
+AC_C_INLINE
+AC_TYPE_INT16_T
+AC_TYPE_INT32_T
+AC_TYPE_SIZE_T
+AC_TYPE_SSIZE_T
+AC_TYPE_UINT16_T
+AC_TYPE_UINT32_T
+AC_TYPE_UINT8_T
+
+# Checks for library functions.
+AC_FUNC_MKTIME
+AC_CHECK_FUNCS([memmove memset])
+
+AC_CONFIG_FILES([Makefile
+ src/ARIB/Makefile
+ src/Makefile
+ src/TS/Makefile])
+AC_OUTPUT
--- /dev/null
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u="sed s,\\\\\\\\,/,g"
+ depmode=msvisualcpp
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> "$depfile"
+ echo >> "$depfile"
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2009-04-28.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dst_arg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar*)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar*)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case $firstarg in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case $firstarg in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+#SUBDIRS = ../TS
+noinst_LIBRARIES = libarib.a
+libarib_a_SOURCES = si.cpp si.h descriptor.cpp descriptor.h converter.h
+libarib_a_LIBADD = ../TS/libts.a
--- /dev/null
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = src/ARIB
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+AR = ar
+ARFLAGS = cru
+libarib_a_AR = $(AR) $(ARFLAGS)
+libarib_a_DEPENDENCIES = ../TS/libts.a
+am_libarib_a_OBJECTS = si.$(OBJEXT) descriptor.$(OBJEXT)
+libarib_a_OBJECTS = $(am_libarib_a_OBJECTS)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+ -o $@
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(libarib_a_SOURCES)
+DIST_SOURCES = $(libarib_a_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+#SUBDIRS = ../TS
+noinst_LIBRARIES = libarib.a
+libarib_a_SOURCES = si.cpp si.h descriptor.cpp descriptor.h converter.h
+libarib_a_LIBADD = ../TS/libts.a
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .cpp .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/ARIB/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/ARIB/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+libarib.a: $(libarib_a_OBJECTS) $(libarib_a_DEPENDENCIES)
+ -rm -f libarib.a
+ $(libarib_a_AR) libarib.a $(libarib_a_OBJECTS) $(libarib_a_LIBADD)
+ $(RANLIB) libarib.a
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/descriptor.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/si.Po@am__quote@
+
+.cpp.o:
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
+
+.cpp.obj:
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstLIBRARIES ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+#pragma once
+
+#include <inttypes.h>
+#include <time.h>
+#include <stdlib.h>
+
+
+namespace TS {
+ namespace PSI {
+ namespace ARIB {
+
+class Converter
+{
+public:
+ static time_t date( const uint8_t *d) {
+ tm t;
+ int Y, M, D;
+ int K = 0;
+ char str[ 3];
+ const uint16_t mdj = (d[ 0] << 8) + d[ 1];
+
+ Y = (int)((mdj - 15078.2) / 365.25);
+ M = (int)((mdj - 14956.1 - (int)(Y * 365.25)) / 30.6001);
+ D = mdj - 14956 - (int)(Y * 365.25) - (int)(M * 30.6001);
+ if( M == 14 || M == 15) {
+ K = 1;
+ }
+ Y += K;
+ M = M - 1 - K * 12;
+
+ t.tm_year = Y;
+ t.tm_mon = M - 1;
+ t.tm_mday = D;
+
+ sprintf( str, "%02X", d[ 2]);
+ t.tm_hour = atoi( str);
+ sprintf( str, "%02X", d[ 3]);
+ t.tm_min = atoi( str);
+ sprintf( str, "%02X", d[ 4]);
+ t.tm_sec = atoi( str);
+
+ return mktime( &t);
+ }
+
+ static int32_t time( const uint8_t *d) {
+ int32_t buf;
+ int32_t time = 0;
+ char str[ 3];
+
+ sprintf( str, "%02X", d[ 0]);
+ buf = atoi( str);
+ time += buf * 3600;
+
+ sprintf( str, "%02X", d[ 1]);
+ buf = atoi( str);
+ time += buf * 60;
+
+ sprintf( str, "%02X", d[ 2]);
+ buf = atoi( str);
+ time += buf;
+
+ return time;
+ }
+
+};
+
+ }
+ }
+}
+
--- /dev/null
+\r
+#include <stdio.h>\r
+#include "descriptor.h"\r
+
+using namespace TS::Description;\r
+using namespace TS::Description::ARIB;
+
+Descriptor* AribDescriptorParser::create( const uint8_t tag, const uint8_t length)
+{
+ Descriptor *p = NULL;
+
+ switch( tag) {
+ case NetworkName::TAG:
+ p = new NetworkName( length);
+ break;
+ case ServiceList::TAG:
+ p = new ServiceList( length);
+ break;
+ case Service::TAG:
+ p = new Service( length);
+ break;
+ case ShortEvent::TAG:
+ p = new ShortEvent( length);
+ break;
+ case ExtendedEvent::TAG:
+ p = new ExtendedEvent( length);
+ break;
+ case Component::TAG:
+ p = new Component( length);
+ break;
+ case Content::TAG:
+ p = new Content( length);
+ break;
+ case AudioComponent::TAG:
+ p = new AudioComponent( length);
+ break;
+ case EventGroup::TAG:
+ p = new EventGroup( length);
+ break;
+ default:
+ p = DescriptorParser::create( tag, length);
+ }
+
+ return p;
+}
+
+
+NetworkName::NetworkName( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+NetworkName::~NetworkName()
+{
+}\r
+\rint16_t NetworkName::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+
+ if( descriptor_length > 0) {
+ name.assign( (char *)&data[ index], descriptor_length);
+ index += descriptor_length;
+ }
+ else {
+ name = "";
+ }
+\r
+ return Descriptor::parse( data, len);\r
+// return index;
+}
+
+
+ServiceList::ServiceList( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+ServiceList::~ServiceList()
+{
+ services.clear();
+}\r
+\rint16_t ServiceList::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+ SERVICE s;
+
+ services.clear();
+
+ while( descriptor_length > index && descriptor_length - index >= 3) {
+ s.service_id = (data[ index] << 8) + data[ index + 1];
+ s.service_type = data[ index + 2];
+ index += 3;
+
+ services.push_back( s);
+ }\r
+\r
+ return Descriptor::parse( data, len);\r
+// return index;
+}
+
+
+
+Service::Service( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+Service::~Service()
+{
+}\r
+\rint16_t Service::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+
+ service_type = data[ index++];
+ service_provider_name_length = data[ index++];
+ if( service_provider_name_length > 0) {\r
+ if( descriptor_length - index >= service_provider_name_length) {
+ service_provider_name.assign( (char *)&data[ index], service_provider_name_length);
+ index += service_provider_name_length;\r
+ }\r
+ else {\r
+ return -1;\r
+ }
+ }
+ else {
+ service_provider_name = "";
+ }
+
+ service_name_length = data[ index++];
+ if( service_name_length > 0) {\r
+ if( descriptor_length - index >= service_name_length) {
+ service_name.assign( (char *)&data[ index], service_name_length);
+ index += service_name_length;\r
+ }\r
+ else {\r
+ return -1;\r
+ }
+ }
+ else {
+ service_name = "";
+ }
+\r
+ return Descriptor::parse( data, len);\r
+// return index;
+}
+
+ShortEvent::ShortEvent( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+ShortEvent::~ShortEvent()
+{
+}\r
+\rint16_t ShortEvent::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+
+ ISO_639_language_code.assign( (char *)&data[ index], 3);
+ index += 3;
+ event_name_length = data[ index++];
+ if( event_name_length > 0) {\r
+ if( descriptor_length - index >= event_name_length) {
+ event_name_char.assign( (char *)&data[ index], event_name_length);
+ index += event_name_length;\r
+ }\r
+ else {\r
+ return -1;\r
+ }
+ }
+ else {
+ event_name_char = "";
+ }
+
+ text_length = data[ index++];
+ if( text_length > 0) {\r
+ if( descriptor_length - index >= text_length) {
+ text_char.assign( (char *)&data[ index], text_length);
+ index += text_length;\r
+ }\r
+ else {\r
+ return -1;\r
+ }
+ }
+ else {
+ text_char = "";
+ }\r
+\r
+ return Descriptor::parse( data, len);\r
+// return index;
+}
+
+
+ExtendedEvent::ExtendedEvent( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+ExtendedEvent::~ExtendedEvent()
+{
+ items.clear();
+}\r
+\rint16_t ExtendedEvent::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+ int16_t item_index = 0;
+ const uint8_t *buf;
+ ITEM item;
+
+ items.clear();
+
+ descriptor_number = (data[ index ] >> 4) & 0x0f;
+ last_descriptor_number = (data[ index++] >> 0) & 0x0f;
+ ISO_639_language_code.assign( (char *)&data[ index], 3);
+ index += 3;
+ length_of_items = data[ index++];
+
+ buf = &data[ index];
+ while( length_of_items > item_index) {
+ item.item_description_length = buf[ item_index++];
+ if( item.item_description_length > 0) {
+ item.item_description_char.assign( (char *)&buf[ item_index], item.item_description_length);
+ item_index += item.item_description_length;
+ }
+ else {
+ item.item_description_char = "";
+ }
+ item.item_length = buf[ item_index++];
+ if( item.item_length > 0) {
+ item.item_char.assign( (char *)&buf[ item_index], item.item_length);
+ item_index += item.item_length;
+ }
+ else {
+ item.item_char = "";
+ }
+ items.push_back( item);
+ }
+ index += item_index;
+
+ text_length = data[ index++];
+ if( text_length > 0) {
+ text_char.assign( (char *)&data[ index], text_length);
+ index += text_length;
+ }
+ else {
+ text_char = "";
+ }\r
+\r
+ return Descriptor::parse( data, len);\r
+// return index;
+}
+
+
+Component::Component( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+Component::~Component()
+{
+}
+
+int16_t Component::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+ int16_t text_len;
+
+ reserved_future_use = (data[ index ] >> 4) & 0x0f;
+ stream_content = (data[ index++] >> 0) & 0x0f;
+ component_type = data[ index++];
+ component_tag = data[ index++];
+
+ ISO_639_language_code.assign( (char *)&data[ index], 3);
+ index += 3;
+
+ text_len = descriptor_length - index;
+ if( text_len > 0) {
+ text_char.assign( (char *)&data[ index], text_len);
+ index += text_len;
+ }
+ else {
+ text_char = "";
+ }
+
+ return Descriptor::parse( data, len);
+// return index;
+}
+
+
+Content::Content( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+Content::~Content()
+{
+ contents.clear();
+}\r
+\rint16_t Content::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+ CONTENT content;
+
+ contents.clear();
+
+ while( descriptor_length > index) {
+ content.content_nibble_level_1 = (data[ index] >> 4) & 0x0f;
+ content.content_nibble_level_2 = (data[ index] >> 0) & 0x0f;
+ index++;
+
+ content.user_nibble_1 = (data[ index] >> 4) & 0x0f;
+ content.user_nibble_2 = (data[ index] >> 0) & 0x0f;
+ index++;
+
+ contents.push_back( content);
+ }\r
+\r
+ return Descriptor::parse( data, len);\r
+// return index;
+}
+
+
+AudioComponent::AudioComponent( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+AudioComponent::~AudioComponent()
+{
+}
+
+int16_t AudioComponent::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+ int16_t text_len;
+
+ reserved_future_use_1 = (data[ index ] >> 4) & 0x0f;
+ stream_content = (data[ index++] >> 0) & 0x0f;
+ component_type = data[ index++];
+ component_tag = data[ index++];
+ stream_type = data[ index++];
+ simulcast_group_tag = data[ index++];
+ ES_multi_lingual_flag = (data[ index ] >> 7) & 0x01;
+ main_component_flag = (data[ index ] >> 6) & 0x01;
+ quality_indicator = (data[ index ] >> 4) & 0x03;
+ sampling_rate = (data[ index ] >> 1) & 0x07;
+ reserved_future_use_2 = (data[ index++] >> 0) & 0x01;
+
+ ISO_639_language_code.assign( (char *)&data[ index], 3);
+ index += 3;
+ if( ES_multi_lingual_flag) {
+ ISO_639_language_code_2.assign( (char *)&data[ index], 3);
+ index += 3;
+ }
+
+ text_len = descriptor_length - index;
+ if( text_len > 0) {
+ text_char.assign( (char *)&data[ index], text_len);
+ index += text_len;
+ }
+ else {
+ text_char = "";
+ }
+
+ return Descriptor::parse( data, len);
+// return index;
+}
+
+
+EventGroup::EventGroup( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+EventGroup::~EventGroup()
+{
+ events.clear();
+ network_events.clear();\r
+ private_data.clear();
+}
+
+const TS::SectionBuffer* EventGroup::getPrivateData()
+{
+ return &private_data;
+}\r
+\rint16_t EventGroup::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+ int i;
+ EVENT e;
+ NETWORK_EVENT n;
+
+ group_type = (data[ index] >> 4) & 0x0f;
+ event_count = (data[ index] >> 0) & 0x0f;
+ index++;
+
+ for( i = 0; i < event_count; i++) {
+ e.service_id = (data[ index + 0] << 8) + data[ index + 1];
+ e.event_id = (data[ index + 2] << 8) + data[ index + 3];
+ index += 4;
+ events.push_back( e);
+ }
+
+ if( group_type == 4 || group_type == 5) {
+ while( descriptor_length > index) {
+ n.original_network_id = (data[ index + 0] << 8) + data[ index + 1];
+ n.transport_stream_id = (data[ index + 2] << 8) + data[ index + 3];
+ n.event.service_id = (data[ index + 4] << 8) + data[ index + 5];
+ n.event.event_id = (data[ index + 6] << 8) + data[ index + 7];
+ index += 8;
+ network_events.push_back( n);
+ }
+ }
+ else {
+ if( !private_data.create( descriptor_length - index)) {
+ return -1;
+ }
+ private_data.append( &data[ index], descriptor_length - index);
+ index = descriptor_length;
+ }\r
+\r
+ return Descriptor::parse( data, len);\r
+}
+
+
--- /dev/null
+#pragma once
+
+#include <inttypes.h>
+#include <list>
+#include <string>
+#include "../TS/descriptor.h"
+#include "../TS/utils.h"
+
+
+namespace TS {
+ namespace Description {
+ namespace ARIB {
+
+class AribDescriptorParser : public TS::Description::DescriptorParser
+{
+protected:
+ TS::Description::Descriptor* create( const uint8_t tag, const uint8_t length);
+};
+
+
+class NetworkName : public TS::Description::Descriptor
+{
+public:
+ static const uint8_t TAG = 0x40;
+
+ std::string name;
+
+ NetworkName( const uint8_t length);
+ virtual ~NetworkName();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+
+class ServiceList : public TS::Description::Descriptor
+{
+public:
+ static const uint8_t TAG = 0x41;
+ struct SERVICE {
+ uint16_t service_id;
+ uint8_t service_type;
+ };
+
+ typedef std::list< SERVICE> SERVICES;
+
+ SERVICES services;
+
+ ServiceList( const uint8_t length);
+ virtual ~ServiceList();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+
+class Service : public TS::Description::Descriptor
+{
+public:
+ static const uint8_t TAG = 0x48;
+
+ uint8_t service_type;
+ uint8_t service_provider_name_length;
+ std::string service_provider_name;
+ uint8_t service_name_length;
+ std::string service_name;
+
+ Service( const uint8_t length);
+ virtual ~Service();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+class ShortEvent : public TS::Description::Descriptor
+{
+public:
+ static const uint8_t TAG = 0x4D;
+
+ std::string ISO_639_language_code;
+ uint8_t event_name_length;
+ std::string event_name_char;
+ uint8_t text_length;
+ std::string text_char;
+
+ ShortEvent( uint8_t length);
+ virtual ~ShortEvent();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+class ExtendedEvent : public TS::Description::Descriptor
+{
+public:
+ struct ITEM {
+ uint8_t item_description_length;
+ std::string item_description_char;
+ uint8_t item_length;
+ std::string item_char;
+ };
+
+ typedef std::list< ITEM> ITEMS;
+
+ static const uint8_t TAG = 0x4E;
+
+ uint8_t descriptor_number;
+ uint8_t last_descriptor_number;
+ std::string ISO_639_language_code;
+ uint8_t length_of_items;
+ ITEMS items;
+ uint8_t text_length;
+ std::string text_char;
+
+ ExtendedEvent( const uint8_t length);
+ virtual ~ExtendedEvent();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+
+class Component : public TS::Description::Descriptor
+{
+public:
+ static const uint8_t TAG = 0x50;
+
+ uint8_t reserved_future_use;
+ uint8_t stream_content;
+ uint8_t component_type;
+ uint8_t component_tag;
+ std::string ISO_639_language_code;
+ std::string text_char;
+
+ Component( uint8_t length);
+ virtual ~Component();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+
+class Content : public TS::Description::Descriptor
+{
+public:
+ struct CONTENT {
+ uint8_t content_nibble_level_1;
+ uint8_t content_nibble_level_2;
+ uint8_t user_nibble_1;
+ uint8_t user_nibble_2;
+ };
+
+ typedef std::list< CONTENT> CONTENTS;
+
+ static const uint8_t TAG = 0x54;
+
+ CONTENTS contents;
+
+ Content( const uint8_t length);
+ virtual ~Content();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+
+class AudioComponent : public TS::Description::Descriptor
+{
+public:
+ static const uint8_t TAG = 0xC4;
+
+ uint8_t reserved_future_use_1;
+ uint8_t stream_content;
+ uint8_t component_type;
+ uint8_t component_tag;
+ uint8_t stream_type;
+ uint8_t simulcast_group_tag;
+ uint8_t ES_multi_lingual_flag;
+ uint8_t main_component_flag;
+ uint8_t quality_indicator;
+ uint8_t sampling_rate;
+ uint8_t reserved_future_use_2;
+ std::string ISO_639_language_code;
+ std::string ISO_639_language_code_2;
+ std::string text_char;
+
+ AudioComponent( uint8_t length);
+ virtual ~AudioComponent();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+
+class EventGroup : public TS::Description::Descriptor
+{
+public:
+ struct EVENT {
+ uint16_t service_id;
+ uint16_t event_id;
+ };
+
+ struct NETWORK_EVENT {
+ uint16_t original_network_id;
+ uint16_t transport_stream_id;
+ EVENT event;
+ };
+
+ typedef std::list< EVENT> EVENTS;
+ typedef std::list< NETWORK_EVENT> NETWORK_EVENTS;
+
+ static const uint8_t TAG = 0xD6;
+
+ uint8_t group_type; // 4bit
+ uint8_t event_count; // 4bit
+ EVENTS events;
+ NETWORK_EVENTS network_events;
+
+private:
+ SectionBuffer private_data;
+
+public:
+ EventGroup( const uint8_t length);
+ virtual ~EventGroup();
+
+ const SectionBuffer* getPrivateData();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+ }
+ }
+}
+
--- /dev/null
+
+#include <stdio.h>
+#include "si.h"
+
+using namespace TS::PSI;
+using namespace TS::PSI::ARIB;
+using namespace TS::Description;
+using namespace TS::Description::ARIB;
+
+ServiceInformation::ServiceInformation( int32_t id, DescriptorParser *des_parser)
+ : Section( id, des_parser)
+{
+ si_id.transport_stream_id = 0x00;
+ reserved_2 = 0x00;
+ version_number = 0x00;
+ current_next_indicator = 0x00;
+ section_number = 0x00;
+ last_section_number = 0x00;
+}
+
+ServiceInformation::~ServiceInformation()
+{
+}
+
+ServiceInformation::STATUS ServiceInformation::parse( SectionBuffer &sec)
+{
+ if( section_syntax_indicator != 0) {
+ if( sec.length() < SI_PARSE_SIZE) {
+ return ERROR_PARSE_SECTION;
+ }
+
+ si_id.transport_stream_id = (sec[ 0] << 8) + sec[ 1];
+ reserved_2 = (sec[ 2] >> 6) & 0x03;
+ version_number = (sec[ 2] >> 1) & 0x1f;
+ current_next_indicator = (sec[ 2] >> 0) & 0x01;
+ section_number = sec[ 3];
+ last_section_number = sec[ 4];
+
+ sec += SI_PARSE_SIZE;
+ }
+
+ return parseSection( sec);
+}
+
+ServiceInformation::STATUS ServiceInformation::parseSection( SectionBuffer &sec)
+{
+ erase_buffer = false;
+ return SUCCESS;
+}
+
+
+
+NIT::NIT( DescriptorParser *des_parser)
+ : ServiceInformation( -1, des_parser)
+{
+ reserved_future_use1 = 0x00;
+ network_descriptors_length = 0x00;
+ reserved_future_use2 = 0x00;
+ transport_stream_loop_length = 0x00;
+}
+
+NIT::~NIT()
+{
+ clearNIT();
+}
+
+void NIT::clear()
+{
+ clearNIT();
+ ServiceInformation::clear();
+}
+
+NIT::STATUS NIT::parseSection( SectionBuffer &sec)
+{
+ int32_t size = 0;
+ STREAM s;
+
+ clearNIT();
+
+ if( sec.length() < 2) {
+ return ERROR_PARSE_SECTION;
+ }
+ reserved_future_use1 = (sec[ 0] >> 4) & 0x0f;
+ network_descriptors_length = ((sec[ 0] & 0x0f) << 8) + sec[ 1];
+ sec += 2;
+ if( sec.length() < network_descriptors_length) {
+ return ERROR_PARSE_SECTION;
+ }
+ size = parseDescriptors( sec, network_descriptors_length, &networks);
+ if( size == -1) {
+ return ERROR_PARSE_SECTION;
+ }
+ sec += size;
+
+ if( sec.length() < 2) {
+ return ERROR_PARSE_SECTION;
+ }
+ reserved_future_use2 = (sec[ 0] >> 4) & 0x0f;
+ transport_stream_loop_length = ((sec[ 0] & 0x0f) << 8) + sec[ 1];
+ sec += 2;
+
+ while( sec.length() >= STREAM_HEADER_SIZE) {
+ s.transport_stream_id = (sec[ 0] << 8) + sec[ 1];
+ s.original_network_id = (sec[ 2] << 8) + sec[ 3];
+ s.reserved_future_use = (sec[ 4] >> 4) & 0x0f;
+ s.transport_descriptors_length = ((sec[ 4] & 0x0f) << 8) + sec[ 5];
+ sec += STREAM_HEADER_SIZE;
+ if( sec.length() < s.transport_descriptors_length) {
+ return ERROR_PARSE_SECTION;
+ }
+
+ size = parseDescriptors( sec, s.transport_descriptors_length, &s.descriptors);
+ if( size == -1) {
+ return ERROR_PARSE_SECTION;
+ }
+ sec += size;
+ streams.push_back( s);
+ }
+
+ erase_buffer = true;
+ return SUCCESS;
+}
+
+bool NIT::checkID( uint8_t id)
+{
+ if( id == 0x40 || id <= 0x41) {
+ return true;
+ }
+ else {
+ return false;
+ }
+}
+
+void NIT::clearNIT()
+{
+ STREAMS::iterator i;
+
+ clearDescriptors( &networks);
+
+ for( i = streams.begin(); i != streams.end(); i++) {
+ clearDescriptors( &i->descriptors);
+ }
+ streams.clear();
+}
+
+
+SDT::SDT( DescriptorParser *des_parser)
+ : ServiceInformation( -1, des_parser)
+{
+ original_network_id = 0x00;\r
+ reserved_future_use = 0x00;\r
+}\r
+\r
+SDT::~SDT()\r
+{
+ clearSDT();\r
+}
+
+void SDT::clear()
+{
+ clearSDT();
+ ServiceInformation::clear();
+}\r
+\r
+SDT::STATUS SDT::parseSection( SectionBuffer &sec)\r
+{
+ int32_t size = 0;\r
+ SERVICE s;
+
+ clearSDT();\r
+
+ if( sec.length() < SD_PARSE_SIZE) {
+ return ERROR_PARSE_SECTION;
+ }
+ original_network_id = (sec[ 0] << 8) + sec[ 1];
+ reserved_future_use = sec[ 2];\r
+ sec += SD_PARSE_SIZE;
+ \r
+ while( sec.length() >= SERVICE_HEADER_SIZE) {\r
+ s.service_id = (sec[ 0] << 8) + sec[ 1];\r
+ s.reserved_future_use = (sec[ 2] >> 5) & 0x07;\r
+ s.EIT_user_defined_flags = (sec[ 2] >> 2) & 0x07;\r
+ s.EIT_schedule_flag = (sec[ 2] >> 1) & 0x01;\r
+ s.EIT_present_following_flag = (sec[ 2] >> 0) & 0x01;\r
+ s.running_status = (sec[ 3] >> 5) & 0x07;\r
+ s.free_CA_mode = (sec[ 3] >> 4) & 0x01;\r
+ s.descriptors_loop_length = ((sec[ 3] & 0x0f) << 8) + sec[ 4];
+ sec += SERVICE_HEADER_SIZE;
+ if( sec.length() < s.descriptors_loop_length) {
+ return ERROR_PARSE_SECTION;
+ }
+
+ size = parseDescriptors( sec, s.descriptors_loop_length, &s.descriptors);
+ if( size == -1) {
+ return ERROR_PARSE_SECTION;
+ }
+ sec += size;\r
+ services.push_back( s);
+ }\r
+ \r
+ erase_buffer = true;\r
+ return SUCCESS;\r
+}
+
+bool SDT::checkID( uint8_t id)
+{
+ if( id == 0x42 || id <= 0x46) {
+ return true;
+ }
+ else {
+ return false;
+ }
+}
+
+void SDT::clearSDT()
+{
+ SERVICES::iterator i;
+
+ for( i = services.begin(); i != services.end(); i++) {
+ clearDescriptors( &i->descriptors);
+ }
+ services.clear();
+}
+
+
+
+EIT::EIT( DescriptorParser *des_parser)
+ : ServiceInformation( -1, des_parser)
+{
+ transport_stream_id = 0x00;\r
+ original_network_id = 0x00;\r
+ segment_last_section_number = 0x00;\r
+ last_table_id = 0x00;\r
+}\r
+\r
+EIT::~EIT()\r
+{
+ clearEIT();\r
+}
+
+void EIT::clear()
+{
+ clearEIT();
+ ServiceInformation::clear();
+}\r
+\r
+EIT::STATUS EIT::parseSection( SectionBuffer &sec)\r
+{
+ int32_t size = 0;\r
+ EVENT e;
+
+ clearEIT();\r
+
+ if( sec.length() < EI_PARSE_SIZE) {
+ return ERROR_PARSE_SECTION;
+ }\r
+ transport_stream_id = (sec[ 0] << 8) + sec[ 1];\r
+ original_network_id = (sec[ 2] << 8) + sec[ 3];\r
+ segment_last_section_number = sec[ 4];\r
+ last_table_id = sec[ 5];\r
+ sec += EI_PARSE_SIZE;
+ \r
+ while( sec.length() >= EVENT_HEADER_SIZE) {\r
+ e.event_id = (sec[ 0] << 8) + sec[ 1];\r
+ e.start_time = Converter::date( &sec[ 2]);\r
+ e.duration = Converter::time( &sec[ 7]);\r
+ e.running_status = (sec[ 10] >> 5) & 0x07;\r
+ e.free_CA_mode = (sec[ 10] >> 4) & 0x01;\r
+ e.descriptors_loop_length = ((sec[ 10] & 0x0f) << 8) + sec[ 11];
+ sec += EVENT_HEADER_SIZE;
+ if( sec.length() < e.descriptors_loop_length) {
+ return ERROR_PARSE_SECTION;
+ }
+
+ size = parseDescriptors( sec, e.descriptors_loop_length, &e.descriptors);
+ if( size == -1) {
+ return ERROR_PARSE_SECTION;
+ }
+ sec += size;\r
+ events.push_back( e);
+ }\r
+ \r
+ erase_buffer = true;\r
+ return SUCCESS;\r
+}
+
+bool EIT::checkID( uint8_t id)
+{
+ if( id >= 0x4E && id <= 0x6F) {
+ return true;
+ }
+ else {
+ return false;
+ }
+}
+
+void EIT::clearEIT()
+{
+ EVENTS::iterator i;
+
+ for( i = events.begin(); i != events.end(); i++) {
+ clearDescriptors( &i->descriptors);
+ }
+ events.clear();
+}\r
--- /dev/null
+#pragma once
+
+#include <inttypes.h>
+#include <list>
+#include "../TS/psi.h"
+#include "../TS/utils.h"
+#include "descriptor.h"
+#include "converter.h"
+
+namespace TS {
+ namespace PSI {
+ namespace ARIB {
+
+class ServiceInformation : public TS::PSI::Section
+{
+protected:
+ static const uint32_t SI_PARSE_SIZE = 5;
+
+public:
+ union ID {
+ uint16_t network_id; // NIT, TLV-NIT
+ uint16_t bouquet_id; // BAT
+ uint16_t transport_stream_id; // SDT
+ uint16_t service_id; // EIT, PCAT
+ uint16_t original_network_id; // BIT, NBIT
+ uint16_t original_service_id; // LDT
+ uint16_t table_id_extension; // AMT
+ } si_id; // 16bit
+
+ uint8_t reserved_2; // 2bit
+ uint8_t version_number; // 5bit
+ uint8_t current_next_indicator; // 1bit
+ uint8_t section_number; // 8bit
+ uint8_t last_section_number; // 8bit
+
+ ServiceInformation( int32_t id = -1, TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~ServiceInformation();
+
+protected:
+ STATUS parse( SectionBuffer &sec);
+ virtual STATUS parseSection( SectionBuffer &sec);
+};
+
+class NIT : public ServiceInformation
+{
+private:
+ static const uint32_t STREAM_HEADER_SIZE = 6;
+
+public:
+ struct STREAM {
+ uint16_t transport_stream_id; // 16bit
+ uint16_t original_network_id; // 16bit
+ uint8_t reserved_future_use; // 4bit
+ uint16_t transport_descriptors_length; // 12bit
+ DESCRIPTORS descriptors;
+ };
+ typedef std::list< STREAM> STREAMS;
+
+ uint8_t reserved_future_use1; // 4bit
+ uint16_t network_descriptors_length; // 12bit
+ DESCRIPTORS networks;
+ uint8_t reserved_future_use2; // 4bit
+ uint16_t transport_stream_loop_length; // 12bit
+ STREAMS streams;
+
+public:
+ NIT( TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~NIT();
+
+ void clear();
+
+private:
+ STATUS parseSection( SectionBuffer &sec);
+ bool checkID( uint8_t id);
+
+ void clearNIT();
+};
+
+
+// SDT 0x42, 0x46
+class SDT : public ServiceInformation
+{
+private:
+ static const uint32_t SD_PARSE_SIZE = 3;
+ static const uint32_t SERVICE_HEADER_SIZE = 5;
+
+public:
+ struct SERVICE {
+ uint16_t service_id; // 16bit
+ uint8_t reserved_future_use; // 3bit
+ uint8_t EIT_user_defined_flags; // 3bit
+ uint8_t EIT_schedule_flag; // 1bit
+ uint8_t EIT_present_following_flag; // 1bit
+ uint8_t running_status; // 3bit
+ uint8_t free_CA_mode; // 1bit
+ uint16_t descriptors_loop_length; // 12bit
+ DESCRIPTORS descriptors;
+ };
+ typedef std::list< SERVICE> SERVICES;
+
+ uint16_t original_network_id; // 16bit
+ uint8_t reserved_future_use; // 8bit
+ SERVICES services;
+
+public:
+ SDT( TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~SDT();
+
+ void clear();
+
+private:
+ STATUS parseSection( SectionBuffer &sec);
+ bool checkID( uint8_t id);
+
+ void clearSDT();
+};
+
+
+// EIT
+class EIT : public ServiceInformation
+{
+private:
+ static const uint32_t EI_PARSE_SIZE = 6;
+ static const uint32_t EVENT_HEADER_SIZE = 12;
+
+public:
+ struct EVENT {
+ public:
+ uint16_t event_id; // 16bit
+ time_t start_time; // 40bit
+ int32_t duration; // 24bit sec
+ uint8_t running_status; // 3bit
+ uint8_t free_CA_mode; // 1bit
+ uint16_t descriptors_loop_length; // 12bit
+ DESCRIPTORS descriptors;
+ };
+ typedef std::list< EVENT> EVENTS;
+
+ uint16_t transport_stream_id; // 16bit
+ uint16_t original_network_id; // 16bit
+ uint8_t segment_last_section_number; // 8bit
+ uint8_t last_table_id; // 8bit
+ EVENTS events;
+
+public:
+ EIT( TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~EIT();
+
+ void clear();
+
+private:
+ STATUS parseSection( SectionBuffer &sec);
+ bool checkID( uint8_t id);
+
+ void clearEIT();
+};
+
+ }
+ }
+}
+
+/*
+network_information_section(){
+ reserved_future_use 4 bslbf
+ network_descriptors_length 12 uimsbf
+
+bouquet_association_section(){
+ reserved_future_use 4 bslbf
+ bouquet_descriptors_length 12 uimsbf
+
+service description section(){
+ original_network_id 16 uimsbf
+ reserved_future_use 8 bslbf
+
+event_information_section(){
+ transport_stream_id 16 uimsbf
+ original_network_id 16 uimsbf
+ segment_last_section_number 8 uimsbf
+ last_table_id 8 uimsbf
+
+partial_content_announcement_section(){
+ transport_stream_id 16 uimsbf
+ original_network_id 16 uimsbf
+ content_id 32 uimsbf
+ num_of_content_version 8 uimsbf
+
+broadcaster_information _section(){
+ reserved_future_use 3 bslbf
+ broadcast_view_propriety 1 bslbf
+ first_descriptors_length 12 uimsbf
+
+network_board_information_section()
+
+linked_description_section(){
+ transport_stream_id 16 uimsbf
+ original_network_id 16 uimsbf
+
+TLV_network_information_table( ){
+ reserved_future_use 4 bslbf
+ network_descriptors_length 12 bslbf
+
+address_map_table() {
+ num_of_service_id 10 uimsbf
+ reserved_future_use 6 bslbf
+
+*/
--- /dev/null
+SUBDIRS = TS ARIB
+
+bin_PROGRAMS = tsparser eit2xml
+eit2xml_SOURCES = eit2xml.cpp epg.cpp epg.h aribstr.cpp aribstr.h
+eit2xml_LDADD = ARIB/libarib.a TS/libts.a
+
+tsparser_SOURCES = tsparser.cpp aribstr.cpp aribstr.h
+tsparser_LDADD = ARIB/libarib.a TS/libts.a
--- /dev/null
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+bin_PROGRAMS = tsparser$(EXEEXT) eit2xml$(EXEEXT)
+subdir = src
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_eit2xml_OBJECTS = eit2xml.$(OBJEXT) epg.$(OBJEXT) aribstr.$(OBJEXT)
+eit2xml_OBJECTS = $(am_eit2xml_OBJECTS)
+eit2xml_DEPENDENCIES = ARIB/libarib.a TS/libts.a
+am_tsparser_OBJECTS = tsparser.$(OBJEXT) aribstr.$(OBJEXT)
+tsparser_OBJECTS = $(am_tsparser_OBJECTS)
+tsparser_DEPENDENCIES = ARIB/libarib.a TS/libts.a
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+ -o $@
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(eit2xml_SOURCES) $(tsparser_SOURCES)
+DIST_SOURCES = $(eit2xml_SOURCES) $(tsparser_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = TS ARIB
+eit2xml_SOURCES = eit2xml.cpp epg.cpp epg.h aribstr.cpp aribstr.h
+eit2xml_LDADD = ARIB/libarib.a TS/libts.a
+tsparser_SOURCES = tsparser.cpp aribstr.cpp aribstr.h
+tsparser_LDADD = ARIB/libarib.a TS/libts.a
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .cpp .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+eit2xml$(EXEEXT): $(eit2xml_OBJECTS) $(eit2xml_DEPENDENCIES)
+ @rm -f eit2xml$(EXEEXT)
+ $(CXXLINK) $(eit2xml_OBJECTS) $(eit2xml_LDADD) $(LIBS)
+tsparser$(EXEEXT): $(tsparser_OBJECTS) $(tsparser_DEPENDENCIES)
+ @rm -f tsparser$(EXEEXT)
+ $(CXXLINK) $(tsparser_OBJECTS) $(tsparser_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aribstr.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eit2xml.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/epg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tsparser.Po@am__quote@
+
+.cpp.o:
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
+
+.cpp.obj:
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(PROGRAMS)
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(bindir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+ install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic ctags ctags-recursive distclean \
+ distclean-compile distclean-generic distclean-tags distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-binPROGRAMS install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-binPROGRAMS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+noinst_LIBRARIES = libts.a
+libts_a_SOURCES = ts_packet.cpp ts_packet.h psi.cpp psi.h descriptor.cpp descriptor.h utils.h
--- /dev/null
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = src/TS
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+AR = ar
+ARFLAGS = cru
+libts_a_AR = $(AR) $(ARFLAGS)
+libts_a_LIBADD =
+am_libts_a_OBJECTS = ts_packet.$(OBJEXT) psi.$(OBJEXT) \
+ descriptor.$(OBJEXT)
+libts_a_OBJECTS = $(am_libts_a_OBJECTS)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+ -o $@
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(libts_a_SOURCES)
+DIST_SOURCES = $(libts_a_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+noinst_LIBRARIES = libts.a
+libts_a_SOURCES = ts_packet.cpp ts_packet.h psi.cpp psi.h descriptor.cpp descriptor.h utils.h
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .cpp .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/TS/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign src/TS/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+libts.a: $(libts_a_OBJECTS) $(libts_a_DEPENDENCIES)
+ -rm -f libts.a
+ $(libts_a_AR) libts.a $(libts_a_OBJECTS) $(libts_a_LIBADD)
+ $(RANLIB) libts.a
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/descriptor.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psi.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ts_packet.Po@am__quote@
+
+.cpp.o:
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
+
+.cpp.obj:
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstLIBRARIES ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+\r
+#include <stdio.h>\r
+#include "descriptor.h"\r
+\r
+using namespace TS::Description;
+
+Descriptor* DescriptorParser::parse( const uint8_t *data, const uint16_t len, uint16_t *parse_size)
+{
+ uint8_t des_tag;
+ uint8_t des_length;
+ int16_t ret;
+ int16_t index = 0;
+ Descriptor *p = NULL;
+
+ *parse_size = 0;
+
+ if( len < 2) {
+ return NULL;
+ }
+
+ des_tag = data[ index++];
+ des_length = data[ index++];
+ if( des_length > len - index) {
+ return NULL;
+ }
+
+ p = create( des_tag, des_length);
+ if( !p) {
+ return p;
+ }
+
+ ret = p->parse( &data[ index], len - index);
+ if( ret < 0) {\r
+ fprintf( stderr, "Descriptor parse error tag = 0x%02X, len = %d\n", des_tag, des_length);
+ delete p;
+ p = NULL;
+ }
+ else if( ret != des_length) {
+ fprintf( stderr, "des overflow tag = 0x%02X, len = %d, ret = %d\n", des_tag, des_length, ret);
+ for( int i = 0; i < des_length;) {
+ for( int j = 0; j < 16 && i < des_length; j++, i++) {
+ fprintf( stderr, "%02X ", data[ index + i]);
+ }
+ fprintf( stderr, "\n");
+ }
+ delete p;
+ p = NULL;
+ }
+ else {
+ index += ret;
+ *parse_size = index;
+ }
+
+ return p;
+}
+
+Descriptor* DescriptorParser::create( const uint8_t tag, const uint8_t length)
+{
+ Descriptor *p = NULL;
+
+ switch( tag) {
+ case ConditionalAccess::TAG:
+ p = new ConditionalAccess( length);
+ break;
+ default:
+ p = new Descriptor( tag, length);
+ }
+
+ return p;
+}
+
+ \r
+\r
+Descriptor::Descriptor( const uint8_t tag, const uint8_t length)
+ : descriptor_tag( tag), descriptor_length( length)\r
+{\r
+ descriptor.clear();\r
+}\r
+\r
+Descriptor::~Descriptor()\r
+{\r
+ descriptor.clear();\r
+}\r
+\r
+int16_t Descriptor::parse( const uint8_t *data, const uint16_t len)\r
+{\r
+ if( !descriptor.create( descriptor_length)) {\r
+ return -1;\r
+ }\r
+ descriptor.append( data, descriptor_length);\r
+ return descriptor_length;\r
+}\r
+\r
+int16_t Descriptor::getBytes( TS::SectionBuffer &buf)\r
+{\r
+ if( descriptor.size() != descriptor_length) {\r
+ return -1;\r
+ }\r
+\r
+ if( !buf.append( descriptor_tag)) {\r
+ return -1;\r
+ }\r
+ if( !buf.append( descriptor_length)) {\r
+ return -1;\r
+ }\r
+ if( !buf.append( descriptor.begin(), descriptor.size())) {\r
+ return -1;\r
+ }\r
+ buf += descriptor.size() + 2;\r
+\r
+ return descriptor.size() + 2;\r
+}
+
+
+ConditionalAccess::ConditionalAccess( const uint8_t length)
+ : Descriptor( TAG, length)
+{
+}
+
+ConditionalAccess::~ConditionalAccess()
+{\r
+ private_data.clear();
+}
+
+const TS::SectionBuffer* ConditionalAccess::getPrivateData()
+{
+ return &private_data;
+}\r
+\rint16_t ConditionalAccess::parse( const uint8_t *data, const uint16_t len)
+{
+ int16_t index = 0;
+
+ CA_system_ID = (data[ index + 0] << 8) + data[ index + 1];
+ reserved = (data[ index + 2] >> 5) & 0x07;
+ CA_PID = ((data[ index + 2] & 0x1f) << 8) + data[ index + 3];
+ index += 4;
+
+ if( !private_data.create( descriptor_length - index)) {
+ return -1;
+ }
+ private_data.append( &data[ index], descriptor_length - index);
+ index = descriptor_length;
+\r
+ return Descriptor::parse( data, len);
+// return index;
+}
+
+
+
--- /dev/null
+#pragma once
+
+#include <inttypes.h>
+#include <list>
+#include <string>
+#include "utils.h"
+
+
+namespace TS {
+ namespace Description {
+
+class Descriptor;
+
+class DescriptorParser
+{
+public:
+ Descriptor* parse( const uint8_t *data, const uint16_t len, uint16_t *parse_size);
+
+protected:
+ virtual Descriptor* create( const uint8_t tag, const uint8_t length);
+};
+
+
+class DescriptorList : public TS::List< Descriptor>
+{
+
+};
+
+
+class Descriptor
+{
+ friend class DescriptorParser;
+
+public:
+ static const uint8_t TAG = 0x00;
+ const uint8_t descriptor_tag;
+ const uint8_t descriptor_length;
+
+private:
+ TS::SectionBuffer descriptor;
+
+protected:
+ Descriptor( const uint8_t tag, const uint8_t length);
+
+public:
+ virtual ~Descriptor();
+
+ virtual int16_t getBytes( SectionBuffer &buf);
+
+protected:
+ virtual int16_t parse( const uint8_t *data, const uint16_t len);
+
+};
+
+class ConditionalAccess : public Descriptor
+{
+public:
+ static const uint8_t TAG = 0x09;
+
+ uint16_t CA_system_ID; // 16bit
+ uint8_t reserved; // 3bit
+ uint16_t CA_PID; // 13bit
+
+private:
+ TS::SectionBuffer private_data;
+
+public:
+ ConditionalAccess( const uint8_t length);
+ virtual ~ConditionalAccess();
+
+ const SectionBuffer* getPrivateData();
+
+private:
+ int16_t parse( const uint8_t *data, const uint16_t len);
+};
+
+ }
+}
+
--- /dev/null
+
+#include <stdio.h>
+#include "psi.h"
+
+using namespace TS;
+using namespace TS::PSI;
+using namespace TS::Description;
+
+Section::Section( int32_t id, DescriptorParser *des_parser)
+ : check_id( id)
+{
+ descriptor_parser = des_parser;
+ ts_packet = NULL;
+
+ clear();
+}
+
+Section::~Section()
+{
+ clear();
+}
+
+Section::STATUS Section::append( TSPacket *p, uint32_t *payload_index)
+{
+ uint8_t *payload, *begin, *end;
+ uint32_t payload_len;
+ uint32_t i;
+ int pointer_field = -1;
+ uint8_t *sec_buf;
+ uint16_t sec_len;
+ uint32_t len = 0;
+ STATUS status;
+
+ if( !(p->getHeader()->getAdaptationFieldControl() & 0x01)) {
+ return NO_SECTION;
+ }
+
+ payload_len = p->getPayload( &payload);
+ begin = payload;
+ end = payload + payload_len;
+
+ if( p->getHeader()->getPayloadUnitStartIndicator()) {
+ if( *payload_index == 0) {
+ pointer_field = payload[ 0];
+ payload++;
+ payload_len--;
+ }
+ else {
+ pointer_field = *payload_index;
+ }
+ }
+
+ if( !section_continue) {
+ if( pointer_field == -1) {
+ return ERROR_START_SECTION;
+ }
+ if( payload_len < pointer_field) {
+ return ERROR_PAYLOAD_LENGTH;
+ }
+ payload += pointer_field;
+ payload_len -= pointer_field;
+
+ if( !checkID( payload[ 0])) {
+ return ERROR_TABLE_ID;
+ }
+
+ clear();
+
+ if( !section_buffer.create()) {
+ return ERROR_ALLOCATE_MEMORY;
+ }
+ }
+
+ if( (status = checkTSPacket( p)) != SUCCESS) {
+ return status;
+ }
+
+ if( section_buffer.size() < SECTION_PARSE_SIZE) {
+ len = SECTION_PARSE_SIZE - section_buffer.size();
+ if( len > payload_len) {
+ section_buffer.append( payload, payload_len);
+ section_continue = true;
+ return CONTINUE;
+ }
+ section_buffer.append( payload, len);
+ payload += len;
+ payload_len -= len;
+ parseHeader( section_buffer);
+ }
+
+ len = section_length + SECTION_PARSE_SIZE - section_buffer.size();
+ if( len > payload_len) {
+ section_continue = true;
+ len = payload_len;
+ }
+ else {
+ section_continue = false;
+ }
+ if( !section_buffer.append( payload, len)) {
+ return ERROR_SECTION_OVERFLOW;
+ }
+ payload += len;
+ payload_len -= len;
+
+ if( section_continue) {
+ return CONTINUE;
+ }
+
+ if( (status = parse( section_buffer)) != SUCCESS) {
+ return status;
+ }
+
+ if( section_syntax_indicator) {
+ if( section_buffer.length() < 4) {
+ return ERROR_PARSE_SECTION;
+ }
+ CRC_32 = 0;
+ for( i = 0; i < CRC32_SIZE; i++) {
+ CRC_32 |= section_buffer[ i] << ((CRC32_SIZE - 1 - i) * 8);
+ }
+ section_buffer.reset();
+ CRC crc;
+ if( check_crc && crc( section_buffer, section_buffer.size())) {
+ return ERROR_CRC;
+ }
+ }
+
+ if( erase_buffer) {
+ section_buffer.clear();
+ }
+ else {
+ section_buffer.reset();
+ }
+
+ if( payload_len > 0 && payload[ 0] != 0xFF) {
+ *payload_index = payload - begin;
+ return INCLUDE_NEW_SECTION;
+ }
+ return SUCCESS;
+}
+
+bool Section::finish()
+{
+ return !section_continue;
+}
+
+Section::STATUS Section::getTSPacket( TSPacket **packet, uint8_t *counter, AdaptationField *af, bool next)
+{
+ STATUS status;
+ uint8_t afc = 0;
+
+ TSPacket *tmp = NULL;
+ Header *h = new Header();
+ uint32_t payload_len = TSPacket::TS_PACKET_SIZE;
+
+ if( next && !ts_packet) {
+ next = false;
+ }
+
+ if( ts_packet) {
+ delete ts_packet;
+ ts_packet = NULL;
+ }
+
+ if( !next) {
+ status = createBytes();
+ if( status != SUCCESS) {
+#if 0
+ if( !af) {
+ return status;
+ }
+#else
+ return status;
+#endif
+ }
+ section_buffer.reset();
+ }
+
+ payload_len -= h->size();
+ if( af) {
+ // アダプテーション有り
+ afc |= 0x02;
+ payload_len -= af->getAdaptationFieldLength();
+ }
+ if( section_buffer.size() > 0) {
+ // ペイロード有り
+ if( !next) {
+ payload_len -= 1; // pointer_field
+ }
+
+ if( payload_len > 0) {
+ afc |= 0x01;
+ }
+ }
+
+ h->setPid( ts_pid);
+ h->setPayloadUnitStartIndicator( next ? 0x00 : 0x01);
+ h->setAdaptationFieldControl( afc);
+ h->setContinuityCounter( *counter);
+
+ if( (afc & 0x01)) {
+ uint8_t payload[ TSPacket::TS_PACKET_SIZE];
+ if( payload_len > section_buffer.length()) {
+ payload_len = section_buffer.length();
+ }
+ if( !next) {
+ payload[ 0] = 0x00;
+ memcpy( &payload[ 1], section_buffer, payload_len);
+ section_buffer += payload_len;
+ payload_len += 1;
+ }
+ else {
+ memcpy( &payload[ 0], section_buffer, payload_len);
+ section_buffer += payload_len;
+ }
+ ts_packet = TSPacket::create( h, af, payload, payload_len);
+// section_buffer += payload_len;
+ (*counter)++;
+ (*counter) &= 0x0f;
+ }
+ else {
+ ts_packet = TSPacket::create( h, af, NULL, 0);
+ }
+
+ *packet = ts_packet;
+
+ return SUCCESS;
+}
+
+void Section::clear()
+{
+ table_id = 0x00;
+ section_syntax_indicator = 0x00;
+ private_indicator = 0x00;
+ reserved_1 = 0x00;
+ section_length = 0x00;
+
+ CRC_32 = 0x00;
+
+ ts_pid = 0;
+ prev_ts_counter = 0;
+
+ section_continue = false;
+ erase_buffer = true;
+ check_crc = true;
+
+ if( ts_packet) {
+ delete ts_packet;
+ }
+ ts_packet = NULL;
+
+ section_buffer.clear();
+}
+
+int32_t Section::parseDescriptors( const uint8_t *data, const uint16_t len, DESCRIPTORS *list)
+{
+ int16_t index = 0;
+ uint16_t size = 0;
+
+ DescriptorParser parser;
+ DescriptorParser *p = descriptor_parser;
+ Descriptor *des;
+
+ if( !p) {
+ p = &parser;
+ }
+
+ list->clear();
+ while( len - index > 0) {
+ des = p->parse( &data[ index], len - index, &size);
+ if( !des) {
+ fprintf( stderr, "sec_len = %d, des_loop_len = %d, parse_index = %d, tag = 0x%02X, des_len = %d\n",
+ section_length, len, index, data[ index], data[ index + 1]);
+
+ DESCRIPTORS::iterator d;
+ for( d = list->begin(); d != list->end(); d++) {
+ fprintf( stderr, "0x%02X, %d\n", (*d)->descriptor_tag, (*d)->descriptor_length);
+ }
+ fprintf( stderr, "\n");
+ fprintf( stderr, "Descriptor err\n");
+ clearDescriptors( list);
+ return -1;
+ }
+ index += size;
+ list->push_back( des);
+ }
+
+ return index;
+}
+
+void Section::clearDescriptors( DESCRIPTORS *list)
+{
+ DESCRIPTORS::iterator i;
+ for( i = list->begin(); i != list->end(); i++) {
+ if( *i) {
+ delete *i;
+ *i = NULL;
+ }
+ }
+ list->clear();
+}
+
+Section::STATUS Section::checkTSPacket( TSPacket *p)
+{
+ uint16_t pid = p->getPID();
+ uint8_t counter = p->getHeader()->getContinuityCounter();
+
+ if( section_continue) {
+ if( pid != ts_pid) {
+ return ERROR_TS_PID;
+ }
+ if( counter != ((prev_ts_counter + 1) & 0x0f)) {
+ fprintf( stderr, "prev = %2d, cur = %2d, cal = %2d\n", prev_ts_counter, counter, (prev_ts_counter + 1)& 0x0f);
+ return ERROR_TS_COUNTER;
+ }
+ }
+ else {
+ ts_pid = pid;
+ }
+ prev_ts_counter = counter;
+ return SUCCESS;
+}
+
+void Section::parseHeader( SectionBuffer &sec)
+{
+ table_id = sec[ 0];
+ section_syntax_indicator = (sec[ 1] >> 7) & 0x01;
+ private_indicator = (sec[ 1] >> 6) & 0x01;
+ reserved_1 = (sec[ 1] >> 4) & 0x03;
+ section_length = ((sec[ 1] & 0x0f) << 8) + sec[ 2];
+ sec += SECTION_PARSE_SIZE;
+}
+
+Section::STATUS Section::parse( SectionBuffer &sec)
+{
+ erase_buffer = false;
+ return SUCCESS;
+}
+
+bool Section::checkID( uint8_t id)
+{
+ if( check_id != -1) {
+ if( check_id != id) {
+ return false;
+ }
+ }
+ return true;
+}
+
+Section::STATUS Section::createBytes()
+{
+ STATUS status;
+ SectionBuffer buf;
+ CRC crc;
+
+ if( !erase_buffer) {
+ return SUCCESS;
+ }
+
+ if( !buf.create()) {
+ return ERROR_ALLOCATE_MEMORY;
+ }
+ status = getBytes( buf);
+ if( status != SUCCESS) {
+ return status;
+ }
+ section_length = buf.size() + CRC32_SIZE;
+
+ if( !section_buffer.create()) {
+ return ERROR_ALLOCATE_MEMORY;
+ }
+ if( !section_buffer.reserve( SECTION_PARSE_SIZE)) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+ section_buffer[ 0] = table_id;
+ Bits::set( §ion_buffer[ 1], section_syntax_indicator , 7, 0x01);
+ Bits::set( §ion_buffer[ 1], private_indicator , 6, 0x01);
+ Bits::set( §ion_buffer[ 1], private_indicator , 4, 0x03);
+ Bits::set( §ion_buffer[ 1], (uint8_t)(section_length >> 8), 0, 0x0f);
+ section_buffer[ 2] = section_length & 0xff;
+ section_buffer += SECTION_PARSE_SIZE;
+
+ if( !section_buffer.append( buf.begin(), buf.size())) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+
+ uint32_t crc32 = crc( section_buffer.begin(), section_buffer.size());
+ uint8_t crc_buf[ CRC32_SIZE];
+ int i;
+ for( i = 0; i < CRC32_SIZE; i++) {
+ crc_buf[ i] = (uint8_t)(crc32 >> ((CRC32_SIZE - 1 - i) * 8));
+ if( !section_buffer.append( (uint8_t)(crc32 >> ((CRC32_SIZE - 1 - i) * 8)))) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+ }
+ return SUCCESS;
+}
+
+Section::STATUS Section::getBytes( SectionBuffer &buf)
+{
+ return ERROR_NOT_IMPLEMENT_GETBYTES;
+}
+
+
+ProgramSpecificInfomation::ProgramSpecificInfomation( int32_t id, DescriptorParser *des_parser)
+ : Section( id, des_parser)
+{
+ psi_id.transport_stream_id = 0x00;
+ reserved_2 = 0x00;
+ version_number = 0x00;
+ current_next_indicator = 0x00;
+ section_number = 0x00;
+ last_section_number = 0x00;
+}
+
+ProgramSpecificInfomation::~ProgramSpecificInfomation()
+{
+}
+
+ProgramSpecificInfomation::STATUS ProgramSpecificInfomation::parse( SectionBuffer &sec)
+{
+ if( section_syntax_indicator != 0) {
+ if( sec.length() < PSI_HEADER_SIZE) {
+ return ERROR_PARSE_SECTION;
+ }
+
+ psi_id.transport_stream_id = (sec[ 0] << 8) + sec[ 1];
+ reserved_2 = (sec[ 2] >> 6) & 0x03;
+ version_number = (sec[ 2] >> 1) & 0x1f;
+ current_next_indicator = (sec[ 2] >> 0) & 0x01;
+ section_number = sec[ 3];
+ last_section_number = sec[ 4];
+
+ sec += PSI_HEADER_SIZE;
+ }
+
+ return parseSection( sec);
+}
+
+ProgramSpecificInfomation::STATUS ProgramSpecificInfomation::parseSection( SectionBuffer &sec)
+{
+ erase_buffer = true;
+ return SUCCESS;
+}
+
+ProgramSpecificInfomation::STATUS ProgramSpecificInfomation::getBytes( SectionBuffer &buf)
+{
+ uint16_t id = psi_id.transport_stream_id;
+
+ if( !buf.reserve( PSI_HEADER_SIZE)) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+
+ buf[ 0] = (uint8_t)((id >> 8) & 0xff);
+ buf[ 1] = (uint8_t)(id & 0xff);
+
+ Bits::set( &buf[ 2], reserved_2 , 6, 0x03);
+ Bits::set( &buf[ 2], version_number , 1, 0x1f);
+ Bits::set( &buf[ 2], current_next_indicator, 0, 0x01);
+
+ buf[ 3] = section_number;
+ buf[ 4] = last_section_number;
+
+ buf += PSI_HEADER_SIZE;
+
+ return SUCCESS;
+}
+
+
+
+PAT::PAT( DescriptorParser *des_parser)
+ : ProgramSpecificInfomation( ID, des_parser)
+{
+ network_PID = 0;
+ program_map_PID.clear();
+}
+
+PAT::~PAT()
+{
+ program_map_PID.clear();
+}
+
+void PAT::clear()
+{
+ program_map_PID.clear();
+ ProgramSpecificInfomation::clear();
+}
+
+PAT::STATUS PAT::parseSection( SectionBuffer &sec)
+{
+ uint32_t i;
+ uint16_t prog_num, pid;
+
+ for( i = 0; i < sec.length() - CRC32_SIZE; i += 4) {
+ prog_num = (sec[ i + 0] << 8) + sec[ i + 1];
+ pid = ((sec[ i + 2] << 8) + sec[ i + 3]) & 0x1fff;
+ if( prog_num == 0x0000) {
+ network_PID = pid;
+ }
+ else {
+ program_map_PID[ prog_num] = pid;
+ }
+ }
+
+ sec += i;
+
+ erase_buffer = true;
+ return SUCCESS;
+}
+
+PAT::STATUS PAT::getBytes( SectionBuffer &buf)
+{
+ STATUS status;
+ PROGRAM_MAP::iterator it;
+
+ status = ProgramSpecificInfomation::getBytes( buf);
+ if( status != SUCCESS) {
+ return status;
+ }
+
+ if( network_PID != 0x0000) {
+ if( !buf.reserve( 4)) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+
+ buf[ 0] = 0x00;
+ buf[ 1] = 0x00;
+ buf[ 2] = (uint8_t)((network_PID >> 8) & 0xff);
+ buf[ 3] = (uint8_t)(network_PID & 0x1f);
+ buf += 4;
+ }
+
+ for( it = program_map_PID.begin(); it != program_map_PID.end(); it++) {
+ if( !buf.reserve( 4)) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+
+ buf[ 0] = (uint8_t)((it->first >> 8) & 0xff);
+ buf[ 1] = (uint8_t)(it->first & 0xff);
+ buf[ 2] = (uint8_t)((it->second >> 8) & 0x1f);
+ buf[ 3] = (uint8_t)(it->second & 0xff);
+ buf += 4;
+ }
+
+ return SUCCESS;
+}
+
+
+
+
+
+PMT::PMT( DescriptorParser *des_parser)
+ : ProgramSpecificInfomation( ID, des_parser)
+{
+}
+
+PMT::~PMT()
+{
+ clearPMT();
+}
+
+void PMT::clear()
+{
+ clearPMT();
+ ProgramSpecificInfomation::clear();
+}
+
+PMT::STATUS PMT::parseSection( SectionBuffer &sec)
+{
+ int32_t size = 0;
+ ELEMENT e;
+
+ clearPMT();
+
+ if( sec.length() < PMS_HEADER_SIZE) {
+ return ERROR_PARSE_SECTION;
+ }
+ reserved_3 = (sec[ 0] >> 5) & 0x07;
+ PCR_PID = ((sec[ 0] & 0x1f) << 8) + sec[ 1];
+ reserved_4 = (sec[ 2] >> 4) & 0x0f;
+ program_info_length = ((sec[ 2] & 0x0f) << 8) + sec[ 3];
+ sec += PMS_HEADER_SIZE;
+
+ if( sec.length() < program_info_length) {
+ return ERROR_PARSE_SECTION;
+ }
+ size = parseDescriptors( sec, program_info_length, &program_info_descriptors);
+ if( size == -1) {
+ return ERROR_PARSE_SECTION;
+ }
+ sec += size;
+
+ while( sec.length() > ELEMENT_HEADER_SIZE) {
+ e.stream_type = (sec[ 0] >> 0) & 0xff;
+ e.reserved_1 = (sec[ 1] >> 5) & 0x07;
+ e.elementary_PID = ((sec[ 1] & 0x1f) << 8) + sec[ 2];
+ e.reserved_2 = (sec[ 3] >> 4) & 0x0f;
+ e.ES_info_length = ((sec[ 3] & 0x0f) << 8) + sec[ 4];
+ sec += ELEMENT_HEADER_SIZE;
+ if( sec.length() < e.ES_info_length) {
+ return ERROR_PARSE_SECTION;
+ }
+
+ size = parseDescriptors( sec, e.ES_info_length, &e.descriptors);
+ if( size == -1) {
+ return ERROR_PARSE_SECTION;
+ }
+ sec += size;
+ elements.push_back( e);
+ }
+
+ erase_buffer = true;
+ return SUCCESS;
+}
+
+void PMT::clearPMT()
+{
+ ELEMENTS::iterator i;
+
+ clearDescriptors( &program_info_descriptors);
+
+ for( i = elements.begin(); i != elements.end(); i++) {
+ clearDescriptors( &i->descriptors);
+ }
+ elements.clear();
+}
+
+void PMT::eraseElement( uint8_t stream_type)
+{
+ ELEMENTS::iterator e = elements.begin();
+
+ while( e != elements.end()) {
+ if( e->stream_type == stream_type) {
+ e = elements.erase( e);
+ }
+ else {
+ e++;
+ }
+ }
+
+ /*
+ for( e = elements.begin(); e != elements.end(); e++) {
+ if( e->stream_type == stream_type) {
+ e = elements.erase( e);
+ continue;
+ }
+ }
+ */
+}
+
+PMT::STATUS PMT::getBytes( SectionBuffer &buf)
+{
+ STATUS status;
+
+ status = ProgramSpecificInfomation::getBytes( buf);
+ if( status != SUCCESS) {
+ return status;
+ }
+
+ DESCRIPTORS::iterator d;
+ SectionBuffer des;
+ int32_t len;
+ uint16_t d_len;
+
+ if( !des.create()) {
+ return ERROR_ALLOCATE_MEMORY;
+ }
+ d_len = 0;
+ for( d = program_info_descriptors.begin(); d != program_info_descriptors.end(); d++) {
+ len = (*d)->getBytes( des);
+ if( len == -1) {
+ return ERROR_GETBYTES_DESCRIPTOR;
+ }
+ d_len += len;
+ }
+ program_info_length = d_len;
+
+ if( !buf.reserve( PMS_HEADER_SIZE)) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+ Bits::set( &buf[ 0], reserved_3 , 5, 0x07);
+ Bits::set( &buf[ 0], (uint8_t)(PCR_PID >> 8) , 0, 0x1f);
+ buf[ 1] = (uint8_t)(PCR_PID & 0xff);
+ Bits::set( &buf[ 2], reserved_4 , 4, 0x0f);
+ Bits::set( &buf[ 2], (uint8_t)(program_info_length >> 8), 0, 0x0f);
+ buf[ 3] = (uint8_t)(program_info_length & 0xff);
+ buf += PMS_HEADER_SIZE;
+
+ if( !buf.append( des.begin(), des.size())) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+ buf += des.size();
+
+ ELEMENTS::iterator e;
+
+ for( e = elements.begin(); e != elements.end(); e++) {
+ des.wipe();
+ d_len = 0;
+ for( d = e->descriptors.begin(); d != e->descriptors.end(); d++) {
+ len = (*d)->getBytes( des);
+ if( len == -1) {
+ return ERROR_GETBYTES_DESCRIPTOR;
+ }
+ d_len += len;
+ }
+ e->ES_info_length = d_len;
+
+ if( !buf.reserve( ELEMENT_HEADER_SIZE)) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+ buf[ 0] = e->stream_type;
+ Bits::set( &buf[ 1], e->reserved_1 , 5, 0x07);
+ Bits::set( &buf[ 1], (uint8_t)(e->elementary_PID >> 8), 0, 0x1f);
+ buf[ 2] = (uint8_t)(e->elementary_PID & 0xff);
+ Bits::set( &buf[ 3], e->reserved_2 , 4, 0x0f);
+ Bits::set( &buf[ 3], (uint8_t)(e->ES_info_length >> 8), 0, 0x0f);
+ buf[ 4] = (uint8_t)(e->ES_info_length & 0xff);
+ buf += ELEMENT_HEADER_SIZE;
+
+ if( !buf.append( des.begin(), des.size())) {
+ return ERROR_GETBYTES_OVERFLOW;
+ }
+ buf += des.size();
+ }
+
+ return SUCCESS;
+}
+
+
+
+CAT::CAT( DescriptorParser *des_parser)
+ : ProgramSpecificInfomation( ID, des_parser)
+{
+}
+
+CAT::~CAT()
+{
+ clearCAT();
+}
+
+void CAT::clear()
+{
+ clearCAT();
+ ProgramSpecificInfomation::clear();
+}
+
+CAT::STATUS CAT::parseSection( SectionBuffer &sec)
+{
+ int32_t size = 0;
+
+ clearCAT();
+
+ while( sec.length() > CRC32_SIZE) {
+ size = parseDescriptors( sec, sec.length() - CRC32_SIZE, &descriptors);
+ if( size == -1) {
+ return ERROR_PARSE_SECTION;
+ }
+ sec += size;
+ }
+
+ erase_buffer = true;
+ return SUCCESS;
+}
+
+void CAT::clearCAT()
+{
+ clearDescriptors( &descriptors);
+}
+
+
+
+
+
+TSDT::TSDT( DescriptorParser *des_parser)
+ : ProgramSpecificInfomation( ID, des_parser)
+{
+}
+
+TSDT::~TSDT()
+{
+ clearTSDT();
+}
+
+void TSDT::clear()
+{
+ clearTSDT();
+ ProgramSpecificInfomation::clear();
+}
+
+TSDT::STATUS TSDT::parseSection( SectionBuffer &sec)
+{
+ int32_t size = 0;
+
+ clearTSDT();
+
+ while( sec.length() > CRC32_SIZE) {
+ size = parseDescriptors( sec, sec.length() - CRC32_SIZE, &descriptors);
+ if( size == -1) {
+ return ERROR_PARSE_SECTION;
+ }
+ sec += size;
+ }
+
+ erase_buffer = true;
+ return SUCCESS;
+}
+
+void TSDT::clearTSDT()
+{
+ clearDescriptors( &descriptors);
+}
--- /dev/null
+#pragma once
+
+#include <inttypes.h>
+#include <string.h>
+#include <list>
+#include <map>
+#include "ts_packet.h"
+#include "descriptor.h"
+#include "utils.h"
+
+namespace TS {
+ namespace PSI {
+
+class Section {
+protected:
+ static const uint32_t SECTION_PARSE_SIZE = 3;
+ static const uint32_t CRC32_SIZE = 4;
+
+private:
+ const int32_t check_id;
+
+public:
+ typedef std::list< TS::Description::Descriptor *> DESCRIPTORS;
+ enum STATUS {
+ SUCCESS,
+ CONTINUE,
+ INCLUDE_NEW_SECTION,
+ NO_SECTION,
+
+ ERROR_TS_PID,
+ ERROR_TS_COUNTER,
+ ERROR_TABLE_ID,
+ ERROR_PAYLOAD_LENGTH,
+ ERROR_START_SECTION,
+ ERROR_ALLOCATE_MEMORY,
+ ERROR_SECTION_OVERFLOW,
+ ERROR_PARSE_SECTION,
+ ERROR_CRC,
+
+ ERROR_NOT_IMPLEMENT_GETBYTES,
+ ERROR_GETBYTES_DESCRIPTOR,
+ ERROR_GETBYTES_OVERFLOW,
+ };
+
+ uint8_t table_id; // 8bit
+ uint8_t section_syntax_indicator; // 1bit
+ uint8_t private_indicator; // 1bit
+ uint8_t reserved_1; // 2bit
+ uint16_t section_length; // 12bit
+
+ uint32_t CRC_32; // 32bit;
+
+protected:
+ bool section_continue;
+ bool erase_buffer;
+ bool check_crc;
+
+ TS::Description::DescriptorParser *descriptor_parser;
+
+private:
+ uint16_t ts_pid;
+ uint8_t prev_ts_counter;
+ SectionBuffer section_buffer;
+
+ TSPacket* ts_packet;
+
+public:
+ Section( int32_t id = -1, TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~Section();
+
+ STATUS append( TSPacket *p, uint32_t *payload_index);
+ bool finish();
+ virtual void clear();
+
+ STATUS getTSPacket( TSPacket **packet, uint8_t *counter, AdaptationField *af, bool next = true);
+
+protected:
+ int32_t parseDescriptors( const uint8_t *data, const uint16_t len, DESCRIPTORS *list);
+ void clearDescriptors( DESCRIPTORS *list);
+
+private:
+ STATUS checkTSPacket( TSPacket *p);
+ void parseHeader( SectionBuffer &sec);
+
+ virtual STATUS parse( SectionBuffer &sec);
+ virtual bool checkID( uint8_t id);
+
+ STATUS createBytes();
+ virtual STATUS getBytes( SectionBuffer &buf);
+};
+
+
+class ProgramSpecificInfomation : public Section
+{
+protected:
+ static const uint32_t PSI_HEADER_SIZE = 5;
+
+public:
+ union ID {
+ uint16_t transport_stream_id; // PAT
+ uint16_t reserved; // CAT, TSDT
+ uint16_t program_number; // PMT
+ //uint16_t table_id_extension; // private section
+ } psi_id; // 16bit
+
+ uint8_t reserved_2; // 2bit
+ uint8_t version_number; // 5bit
+ uint8_t current_next_indicator; // 1bit
+ uint8_t section_number; // 8bit
+ uint8_t last_section_number; // 8bit
+
+ ProgramSpecificInfomation( int32_t id = -1, TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~ProgramSpecificInfomation();
+
+
+protected:
+ STATUS parse( SectionBuffer &sec);
+ virtual STATUS parseSection( SectionBuffer &sec);
+
+ virtual STATUS getBytes( SectionBuffer &buf);
+};
+
+
+// PAT
+class PAT : public ProgramSpecificInfomation
+{
+public:
+ static const int32_t ID = 0x00;
+ typedef std::map< uint16_t, uint16_t> PROGRAM_MAP;
+
+ uint16_t network_PID;
+ PROGRAM_MAP program_map_PID;
+
+ PAT( TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~PAT();
+
+ void clear();
+
+private:
+ STATUS parseSection( SectionBuffer &sec);
+
+ STATUS getBytes( SectionBuffer &buf);
+};
+
+
+// PMT
+class PMT : public ProgramSpecificInfomation
+{
+public:
+ static const int32_t ID = 0x02;
+ static const uint32_t PMS_HEADER_SIZE = 4;
+ static const uint32_t ELEMENT_HEADER_SIZE = 5;
+
+ struct ELEMENT {
+ uint8_t stream_type; // 8bit
+ uint8_t reserved_1; // 3bit
+ uint16_t elementary_PID; // 13bit
+ uint8_t reserved_2; // 4bit
+ uint16_t ES_info_length; // 12bit
+ DESCRIPTORS descriptors;
+ };
+ typedef std::list< ELEMENT> ELEMENTS;
+
+ uint8_t reserved_3; // 3bit
+ uint16_t PCR_PID; // 13bit
+ uint8_t reserved_4; // 4bit
+ uint16_t program_info_length; // 12bit
+ DESCRIPTORS program_info_descriptors;
+ ELEMENTS elements;
+
+ PMT( TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~PMT();
+
+ void clear();
+ void eraseElement( uint8_t stream_type);
+
+private:
+ STATUS parseSection( SectionBuffer &sec);
+ void clearPMT();
+
+ STATUS getBytes( SectionBuffer &buf);
+
+};
+
+// CAT
+class CAT : public ProgramSpecificInfomation
+{
+public:
+ static const int32_t ID = 0x01;
+
+ DESCRIPTORS descriptors;
+
+ CAT( TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~CAT();
+
+ void clear();
+
+private:
+ STATUS parseSection( SectionBuffer &sec);
+ void clearCAT();
+};
+
+// TSDT
+class TSDT : public ProgramSpecificInfomation
+{
+public:
+ static const int32_t ID = 0x03;
+
+ DESCRIPTORS descriptors;
+
+ TSDT( TS::Description::DescriptorParser *des_parser = NULL);
+ virtual ~TSDT();
+
+ void clear();
+
+private:
+ STATUS parseSection( SectionBuffer &sec);
+ void clearTSDT();
+};
+
+
+ }
+}
+
--- /dev/null
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "ts_packet.h"
+
+using namespace TS;
+
+Header::Header()
+{
+ memset( header, 0x00, TS_HEADER_SZIE);
+ header[ 0] = SYNC;
+}
+
+Header::~Header()
+{
+}
+
+int Header::getBytes( uint8_t *buf, uint32_t size)
+{
+ if( size < TS_HEADER_SZIE) {
+ return -1;
+ }
+
+ memcpy( buf, header, TS_HEADER_SZIE);
+
+ return TS_HEADER_SZIE;
+}
+
+int Header::parse( const uint8_t *buf, uint32_t len)
+{
+ if( len < TS_HEADER_SZIE) {
+ return -1;
+ }
+
+ memcpy( header, buf, TS_HEADER_SZIE);
+
+#ifdef PACKET_DEBUG
+ sync_byte = (buf[ 0] >> 0) & 0xff;
+ transport_error_indicator = (buf[ 1] >> 7) & 0x01;
+ payload_unit_start_indicator = (buf[ 1] >> 6) & 0x01;
+ transport_priority = (buf[ 1] >> 5) & 0x01;
+ pid = ((buf[ 1] & 0x1f) << 8) + buf[ 2];
+ transport_scrambling_control = (buf[ 3] >> 6) & 0x03;
+ adaptation_field_control = (buf[ 3] >> 4) & 0x03;
+ continuity_counter = (buf[ 3] >> 0) & 0x0f;
+#endif
+
+ return TS_HEADER_SZIE;
+}
+
+AdaptationField::AdaptationField()
+{
+ adaptation_field = NULL;
+
+ field_data = NULL;
+ field_data_length = 0;
+
+#ifdef PACKET_DEBUG
+ adaptation_field_length = 0x00;
+ discontinuity_indicator = 0x00;
+ random_access_indicator = 0x00;
+ elementary_stream_priority_indicator = 0x00;
+ PCR_flag = 0x00;
+ OPCR_flag = 0x00;
+ splicing_point_flag = 0x00;
+ transport_private_data_flag = 0x00;
+ adaptation_field_extension_flag = 0x00;
+#endif
+}
+
+AdaptationField::AdaptationField( AdaptationField &src)
+{
+ src.copy( *this);
+}
+
+AdaptationField::~AdaptationField()
+{
+ clear();
+}
+
+AdaptationField& AdaptationField::operator=( AdaptationField &src)
+{
+ src.copy( *this);
+ return *this;
+}
+
+int AdaptationField::getBytes( uint8_t *buf, uint32_t size)
+{
+ int index = 0;
+ const uint8_t af_len = getAdaptationFieldLength();
+
+ if( size < af_len + 1) {
+ return -1;
+ }
+
+ memcpy( buf, adaptation_field, af_len + 1);
+
+ return af_len + 1;
+}
+
+int AdaptationField::parse( uint8_t *buf, uint32_t len)
+{
+ int index = 0;
+ uint8_t af_len;
+
+ if( len < 1) {
+ return -1;
+ }
+
+ af_len = buf[ 0];
+ index++;
+ if( len < af_len + index) {
+ return -1;
+ }
+
+ clear();
+ adaptation_field = new uint8_t[ af_len + index];
+ memcpy( adaptation_field, buf, af_len + index);
+
+#ifdef PACKET_DEBUG
+ adaptation_field_length = af_len;
+#endif
+
+ if( af_len > 0) {
+#ifdef PACKET_DEBUG
+ discontinuity_indicator = (buf[ index] >> 7) & 0x01;
+ random_access_indicator = (buf[ index] >> 6) & 0x01;
+ elementary_stream_priority_indicator = (buf[ index] >> 5) & 0x01;
+ PCR_flag = (buf[ index] >> 4) & 0x01;
+ OPCR_flag = (buf[ index] >> 3) & 0x01;
+ splicing_point_flag = (buf[ index] >> 2) & 0x01;
+ transport_private_data_flag = (buf[ index] >> 1) & 0x01;
+ adaptation_field_extension_flag = (buf[ index] >> 0) & 0x01;
+#endif
+ index++;
+
+ field_data_length = af_len - 1;
+ if( field_data_length > 0) {
+ field_data = &adaptation_field[ index];
+ }
+ index += field_data_length;
+ }
+
+ return index;
+}
+
+
+void AdaptationField::copy( AdaptationField &dst)
+{
+ const uint8_t af_len = getAdaptationFieldLength();
+
+ dst.clear();
+ if( adaptation_field) {
+ dst.adaptation_field = new uint8_t[ af_len + 1];
+ memcpy( dst.adaptation_field, adaptation_field, af_len + 1);
+
+ if( field_data_length > 0) {
+ dst.field_data_length = field_data_length;
+ dst.field_data = &dst.adaptation_field[ 2];
+ }
+ }
+
+#ifdef PACKET_DEBUG
+ dst.adaptation_field_length = adaptation_field_length;
+ dst.discontinuity_indicator = discontinuity_indicator;
+ dst.random_access_indicator = random_access_indicator;
+ dst.elementary_stream_priority_indicator = elementary_stream_priority_indicator;
+ dst.PCR_flag = PCR_flag;
+ dst.OPCR_flag = OPCR_flag;
+ dst.splicing_point_flag = splicing_point_flag;
+ dst.transport_private_data_flag = transport_private_data_flag;
+ dst.adaptation_field_extension_flag = adaptation_field_extension_flag;
+#endif
+}
+
+void AdaptationField::clear()
+{
+ if( adaptation_field) {
+ delete[] adaptation_field;
+ }
+ adaptation_field = NULL;
+ field_data = NULL;
+ field_data_length = 0;
+}
+
+TSPacket::TSPacket( Header *h, AdaptationField *af, uint8_t *p, uint32_t p_len)
+{
+ header = h;
+ adaptation_field = af;
+
+ if( p_len > 0) {
+ payload = new uint8_t[ p_len];
+ memcpy( payload, p, p_len);
+ payload_length = p_len;
+ }
+ else {
+ payload = NULL;
+ payload_length = 0;
+ }
+}
+
+TSPacket::~TSPacket()
+{
+ if( header) {
+ delete header;
+ header = NULL;
+ }
+ if( adaptation_field) {
+ delete adaptation_field;
+ adaptation_field = NULL;
+ }
+ if( payload) {
+ delete[] payload;
+ payload = NULL;
+ }
+ payload_length = 0;
+}
+
+uint16_t TSPacket::getPID()
+{
+ return header->getPid();
+}
+
+Header* TSPacket::getHeader()
+{
+ return header;
+}
+
+AdaptationField* TSPacket::getAdaptationField()
+{
+ return adaptation_field;
+}
+uint32_t TSPacket::getPayloadLength()
+{
+ return payload_length;
+}
+
+uint32_t TSPacket::getPayload( uint8_t **p)
+{
+ *p = payload;
+ return payload_length;
+}
+
+int TSPacket::getBytes( uint8_t *buf, uint32_t size)
+{
+ int index = 0;
+ int w;
+
+ if( size < TS_PACKET_SIZE) {
+ return -1;
+ }
+
+ w = header->getBytes( &buf[ index], size - index);
+ if( w != Header::TS_HEADER_SZIE) {
+ return -1;
+ }
+ index += w;
+
+ if( adaptation_field) {
+ w = adaptation_field->getBytes( &buf[ index], size - index);
+ if( w < 0) {
+ return -1;
+ }
+ index += w;
+ }
+
+ if( index + payload_length > TS_PACKET_SIZE) {
+ return -1;
+ }
+ memcpy( &buf[ index], payload, payload_length);
+ index += payload_length;
+
+ if( index < TS_PACKET_SIZE) {
+ memset( &buf[ index], 0xff, TS_PACKET_SIZE - index);
+ index += (TS_PACKET_SIZE - index);
+ }
+
+ return index;
+}
+
+
+TSPacket* TSPacket::parse( uint8_t *buf, uint32_t len, uint32_t *read_len)
+{
+ TSPacket *p = NULL;
+ Header *h = NULL;
+ AdaptationField *af = NULL;
+ int index = 0;
+ int sync_index = 0;
+ int payload_len = 0;
+ int read;
+
+ *read_len = 0;
+
+ if( (index = TSPacket::sync( buf, len)) == -1) {
+ goto ERR;
+ }
+ if( sync_index != 0) {
+ fprintf( stderr, "sync index = %d\n", sync_index);
+ }
+
+ if( len - index < TS_PACKET_SIZE) {
+ goto ERR;
+ }
+ sync_index = index;
+
+ h = new Header();
+ if( !h) {
+ goto ERR;
+ }
+ if( (read = h->parse( &buf[ index], len - index)) == -1) {
+ goto ERR;
+ }
+ index += read;
+
+ if( h->getTransportErrorIndicator()) {
+ //fprintf( stderr, "transport_error_indicator = 1, PID = 0x%04X\n", h->getPid());
+ goto ERR;
+ }
+
+ if( h->getAdaptationFieldControl() == 0x02 || h->getAdaptationFieldControl() == 0x03) {
+ af = new AdaptationField();
+ if( !af) {
+ goto ERR;
+ }
+ if( (read = af->parse( &buf[ index], len - index)) == -1) {
+ goto ERR;
+ }
+ index += read;
+ }
+ payload_len = TS_PACKET_SIZE - (index - sync_index);
+ if( payload_len < 0) {
+ payload_len = 0;
+ }
+
+ p = new TSPacket( h, af, &buf[ index], payload_len);
+ if( !p) {
+ goto ERR;
+ }
+ index += payload_len;
+ *read_len = index;
+
+ return p;
+
+ERR:
+ if( h) {
+ delete h;
+ }
+ if( af) {
+ delete af;
+ }
+ if( p) {
+ delete p;
+ }
+
+ return NULL;
+
+}
+
+TSPacket* TSPacket::create( Header *h, AdaptationField *af, uint8_t *p, uint32_t p_len)
+{
+ TSPacket *ts = new TSPacket( h, af, p, p_len);
+
+ return ts;
+}
+
+int TSPacket::sync( uint8_t *buf, uint32_t len)
+{
+ uint32_t i;
+ int sync_index = -1;
+ for( i = 0; i < len; i++) {
+ if( buf[ i] == Header::SYNC) {
+ sync_index = (int)i;
+ break;
+ }
+ }
+ return sync_index;
+}
+
+
+
--- /dev/null
+#pragma once
+
+#include <inttypes.h>
+#include <stdlib.h>
+#include "utils.h"
+
+namespace TS {
+
+class Header {
+public:
+ static const int TS_HEADER_SZIE = 4;
+ static const uint8_t SYNC = 0x47;
+
+private:
+ uint8_t header[ TS_HEADER_SZIE];
+
+#ifdef PACKET_DEBUG
+ uint8_t sync_byte; // 8bit
+ uint8_t transport_error_indicator; // 1bit
+ uint8_t payload_unit_start_indicator; // 1bit
+ uint8_t transport_priority; // 1bit
+ uint16_t pid; // 13bit
+ uint8_t transport_scrambling_control; // 2bit
+ uint8_t adaptation_field_control; // 2bit
+ uint8_t continuity_counter; // 4bit
+#endif
+
+public:
+ Header();
+ virtual ~Header();
+
+ int getBytes( uint8_t *buf, uint32_t size);
+ int parse( const uint8_t *buf, uint32_t len);
+
+ uint32_t size();
+
+ uint8_t getTransportErrorIndicator();
+ uint8_t getPayloadUnitStartIndicator();
+ uint8_t getTransportPriority();
+ uint16_t getPid();
+ uint8_t getTransportScramblingControl();
+ uint8_t getAdaptationFieldControl();
+ uint8_t getContinuityCounter();
+
+ void setTransportErrorIndicator( uint8_t val);
+ void setPayloadUnitStartIndicator( uint8_t val);
+ void setTransportPriority( uint8_t val);
+ void setPid( uint16_t val);
+ void setTransportScramblingControl( uint8_t val);
+ void setAdaptationFieldControl( uint8_t val);
+ void setContinuityCounter( uint8_t val) ;
+};
+
+class AdaptationField {
+private:
+ uint8_t *adaptation_field;
+
+#ifdef PACKET_DEBUG
+ uint8_t adaptation_field_length; // 8bit
+ uint8_t discontinuity_indicator; // 1bit
+ uint8_t random_access_indicator; // 1bit
+ uint8_t elementary_stream_priority_indicator; // 1bit
+ uint8_t PCR_flag; // 1bit
+ uint8_t OPCR_flag; // 1bit
+ uint8_t splicing_point_flag; // 1bit
+ uint8_t transport_private_data_flag; // 1bit
+ uint8_t adaptation_field_extension_flag; // 1bit
+#endif
+
+ uint8_t *field_data;
+ uint32_t field_data_length;
+
+public:
+ AdaptationField();
+ AdaptationField( AdaptationField &src);
+ virtual ~AdaptationField();
+
+ int getBytes( uint8_t *buf, uint32_t size);
+ int parse( uint8_t *buf, uint32_t len);
+
+ uint32_t size();
+
+ uint8_t getAdaptationFieldLength(); // 8bit
+ uint8_t getDiscontinuityIndicator(); // 1bit
+ uint8_t getRandomAccessIndicator(); // 1bit
+ uint8_t getElementaryStreamPriorityIndicator(); // 1bit
+ uint8_t getPCRFlag(); // 1bit
+ uint8_t getOPCRFlag(); // 1bit
+ uint8_t getSplicingPointFlag(); // 1bit
+ uint8_t getTransportPrivateDataFlag(); // 1bit
+ uint8_t getAdaptationFieldExtensionFlag(); // 1bit
+
+
+ AdaptationField& operator=( AdaptationField &src);
+
+private:
+ void copy( AdaptationField &dst);
+ void clear();
+};
+
+
+class TSPacket {
+public:
+ static const int TS_PACKET_SIZE = 188;
+
+private:
+ Header *header;
+ AdaptationField *adaptation_field;
+ uint8_t *payload;
+ uint32_t payload_length;
+
+private:
+ TSPacket( Header *h, AdaptationField *af, uint8_t *p, uint32_t p_len);
+
+public:
+ virtual ~TSPacket();
+
+public:
+ uint16_t getPID();
+ Header* getHeader();
+ AdaptationField* getAdaptationField();
+ uint32_t getPayloadLength();
+ uint32_t getPayload( uint8_t **p);
+
+ int getBytes( uint8_t *buf, uint32_t size);
+
+ static TSPacket* parse( uint8_t *buf, uint32_t len, uint32_t *read_len);
+ static TSPacket* create( Header *h, AdaptationField *af, uint8_t *p, uint32_t p_len);
+
+private:
+ static int sync( uint8_t *buf, uint32_t len) ;
+};
+
+
+
+inline uint32_t Header::size()
+{
+ return TS_HEADER_SZIE;
+}
+
+inline uint8_t Header::getTransportErrorIndicator()
+{
+ return Bits::get( header[ 1], 7, 0x01);
+}
+
+inline void Header::setTransportErrorIndicator( uint8_t val)
+{
+ Bits::set( &header[ 1], val, 7, 0x01);
+}
+
+inline uint8_t Header::getPayloadUnitStartIndicator()
+{
+ return Bits::get( header[ 1], 6, 0x01);
+}
+
+inline void Header::setPayloadUnitStartIndicator( uint8_t val)
+{
+ Bits::set( &header[ 1], val, 6, 0x01);
+}
+
+inline uint8_t Header::getTransportPriority()
+{
+ return Bits::get( header[ 1], 5, 0x01);
+}
+
+inline void Header::setTransportPriority( uint8_t val)
+{
+ Bits::set( &header[ 1], val, 5, 0x01);
+}
+
+inline uint16_t Header::getPid()
+{
+ return (Bits::get( header[ 1], 0, 0x1f) << 8) + header[ 2];
+}
+
+inline void Header::setPid( uint16_t val)
+{
+ Bits::set( &header[ 1], (uint8_t)(val >> 8), 0, 0x1f);
+ header[ 2] = val & 0xff;
+}
+
+inline uint8_t Header::getTransportScramblingControl()
+{
+ return Bits::get( header[ 3], 6, 0x03);
+}
+
+inline void Header::setTransportScramblingControl( uint8_t val)
+{
+ Bits::set( &header[ 3], val, 6, 0x03);
+}
+
+inline uint8_t Header::getAdaptationFieldControl()
+{
+ return Bits::get( header[ 3], 4, 0x03);
+}
+
+inline void Header::setAdaptationFieldControl( uint8_t val)
+{
+ Bits::set( &header[ 3], val, 4, 0x03);
+}
+
+inline uint8_t Header::getContinuityCounter()
+{
+ return Bits::get( header[ 3], 0, 0x0f);
+}
+
+inline void Header::setContinuityCounter( uint8_t val)
+{
+ Bits::set( &header[ 3], val, 0, 0x0f);
+}
+
+
+
+inline uint32_t AdaptationField::size()
+{
+ return getAdaptationFieldLength() + 1;
+}
+
+inline uint8_t AdaptationField::getAdaptationFieldLength()
+{
+ if( adaptation_field) {
+ return adaptation_field[ 0];
+ }
+ else {
+ return 0;
+ }
+}
+
+inline uint8_t AdaptationField::getDiscontinuityIndicator()
+{
+ if( adaptation_field) {
+ return Bits::get( adaptation_field[ 1], 7, 0x01);
+ }
+ else {
+ return 0;
+ }
+}
+
+inline uint8_t AdaptationField::getRandomAccessIndicator()
+{
+ if( adaptation_field) {
+ return Bits::get( adaptation_field[ 1], 6, 0x01);
+ }
+ else {
+ return 0;
+ }
+}
+
+inline uint8_t AdaptationField::getElementaryStreamPriorityIndicator()
+{
+ if( adaptation_field) {
+ return Bits::get( adaptation_field[ 1], 5, 0x01);
+ }
+ else {
+ return 0;
+ }
+}
+
+inline uint8_t AdaptationField::getPCRFlag()
+{
+ if( adaptation_field) {
+ return Bits::get( adaptation_field[ 1], 4, 0x01);
+ }
+ else {
+ return 0;
+ }
+}
+
+inline uint8_t AdaptationField::getOPCRFlag()
+{
+ if( adaptation_field) {
+ return Bits::get( adaptation_field[ 1], 3, 0x01);
+ }
+ else {
+ return 0;
+ }
+}
+
+inline uint8_t AdaptationField::getSplicingPointFlag()
+{
+ if( adaptation_field) {
+ return Bits::get( adaptation_field[ 1], 2, 0x01);
+ }
+ else {
+ return 0;
+ }
+}
+
+inline uint8_t AdaptationField::getTransportPrivateDataFlag()
+{
+ if( adaptation_field) {
+ return Bits::get( adaptation_field[ 1], 1, 0x01);
+ }
+ else {
+ return 0;
+ }
+}
+
+inline uint8_t AdaptationField::getAdaptationFieldExtensionFlag()
+{
+ if( adaptation_field) {
+ return Bits::get( adaptation_field[ 1], 0, 0x01);
+ }
+ else {
+ return 0;
+ }
+}
+
+}
+
--- /dev/null
+#pragma once
+
+#include <inttypes.h>
+#include <string.h>
+#include <assert.h>
+#include <list>
+
+namespace TS {
+
+class SectionBuffer
+{
+private:
+ static const uint32_t MAX_SECTION_SIZE = 4096;
+ uint8_t *_data;
+ uint32_t _current;
+ uint32_t _set_size;
+ uint32_t _max_size;
+
+
+public:
+ SectionBuffer() {
+ _data = NULL;
+ _current = 0;
+ _set_size = 0;
+ _max_size = 0;
+ };
+
+ SectionBuffer( SectionBuffer &src) {
+ copy( &src);
+ }
+
+ ~SectionBuffer() {
+ clear();
+ }
+
+ bool create( uint32_t size = MAX_SECTION_SIZE) {
+ clear();
+ if( size == 0) {
+ return true;
+ }
+ _data = new uint8_t[ size];
+ if( _data) {
+ _max_size = size;
+ wipe();
+ return true;
+ }
+ else {
+ return false;
+ }
+ }
+
+ void clear() {
+ if( _data) {
+ delete[] _data;
+ }
+ _data = NULL;
+ _current = 0;
+ _max_size = 0;
+ _set_size = 0;
+ }
+
+ bool append( const uint8_t *val, const uint32_t len) {
+ if( _set_size + len > _max_size) {
+ return false;
+ }
+ if( len > 0) {
+ memcpy( &_data[ _set_size], val, len);
+ _set_size += len;
+ }
+ return true;
+ }
+
+ bool append( uint8_t val) {
+ return append( &val, 1);
+ }
+
+ bool reserve( const uint32_t len) {
+ if( _set_size + len > _max_size) {
+ return false;
+ }
+ if( len > 0) {
+ _set_size += len;
+ }
+ return true;
+ }
+
+ void wipe() {
+ if( _data) {
+ memset( _data, 0x00, _max_size);
+ _current = 0;
+ _set_size = 0;
+ }
+ }
+
+ uint8_t* begin() {
+ return _data;
+ }
+
+ uint32_t size() const {
+ return _set_size;
+ }
+
+ uint32_t length() const {
+ return _set_size - _current;
+ }
+
+ void reset() {
+ _current = 0;
+ }
+
+ void set_current( const uint32_t index) {
+ assert( index <= _set_size);
+ _current = index;
+ }
+
+ uint8_t& operator[]( uint32_t index) {
+ uint32_t i = _current + index;
+ assert( i < _set_size);
+ return _data[ i];
+ }
+
+ const uint8_t& operator[]( uint32_t index) const {
+ uint32_t i = _current + index;
+ assert( i < _set_size);
+ return _data[ i];
+ }
+
+ operator uint8_t*() {
+ assert( _current < _set_size);
+ return &_data[ _current];
+ }
+
+ operator const uint8_t*() const {
+ assert( _current < _set_size);
+ return &_data[ _current];
+ }
+
+ uint8_t* operator+( const uint32_t a) {
+ uint32_t i = _current + a;
+ assert( i < _set_size);
+ return _data + i;
+ }
+
+ uint8_t* operator-( const uint32_t a) {
+ uint32_t i = _current - a;
+ assert( i < _set_size);
+ return _data + i;
+ }
+
+ const uint8_t* operator+( const uint32_t a) const {
+ uint32_t i = _current + a;
+ assert( i < _set_size);
+ return _data + i;
+ }
+
+ const uint8_t* operator-( const uint32_t a) const {
+ uint32_t i = _current - a;
+ assert( i < _set_size);
+ return _data + i;
+ }
+
+ SectionBuffer& operator+=( const uint32_t a) {
+ set_current( _current + a);
+ return *this;
+ }
+
+ SectionBuffer& operator++() {
+ set_current( _current + 1);
+ return *this;
+ }
+
+ SectionBuffer& operator-=( const uint32_t a) {
+ set_current( _current - a);
+ return *this;
+ }
+
+ SectionBuffer& operator--() {
+ set_current( _current - 1);
+ return *this;
+ }
+
+ SectionBuffer& operator=( SectionBuffer& src) {
+ copy( &src);
+ return *this;
+ }
+
+private:
+ void copy( SectionBuffer *p) {
+ create( p->_max_size);
+ append( p->_data, p->_set_size);
+ _current = 0;
+ }
+};
+
+
+template< class T>
+class List
+{
+public:
+ typedef T LIST_TYPE;
+private:
+ typedef std::list< T> __LIST;
+
+ __LIST list;
+
+public:
+ List() {
+ clear();
+ }
+
+ ~List() {
+ clear();
+ }
+
+ void clear() {
+ list.clear();
+ }
+
+ int size() {
+ return (int)list.size();
+ }
+
+ void add( LIST_TYPE &val) {
+ list.push_back( val);
+ }
+
+ void insert( int index, LIST_TYPE &val) {
+ typename __LIST::iterator i;
+ if( index < 0) {
+ i = list.end();
+ }
+ else {
+ i = list.begin();
+ std::advance( i, index);
+ }
+ list.insert( i, val);
+ }
+
+ void erase( int index) {
+ assert( index < list.size());
+ typename __LIST::iterator i = list.begin();
+ std::advance( i, index);
+ list.erase( i);
+ }
+
+ LIST_TYPE& at( int index) {
+ assert( index < list.size());
+ typename __LIST::iterator i = list.begin();
+ std::advance( i, index);
+ return *i;
+ }
+};
+
+class CRC {
+public:
+ uint32_t operator()( uint8_t *p, uint32_t len) {
+ const uint32_t t[ 256] = {
+ 0x00000000, 0x04C11DB7, 0x09823B6E, 0x0D4326D9, 0x130476DC, 0x17C56B6B, 0x1A864DB2, 0x1E475005,
+ 0x2608EDB8, 0x22C9F00F, 0x2F8AD6D6, 0x2B4BCB61, 0x350C9B64, 0x31CD86D3, 0x3C8EA00A, 0x384FBDBD,
+ 0x4C11DB70, 0x48D0C6C7, 0x4593E01E, 0x4152FDA9, 0x5F15ADAC, 0x5BD4B01B, 0x569796C2, 0x52568B75,
+ 0x6A1936C8, 0x6ED82B7F, 0x639B0DA6, 0x675A1011, 0x791D4014, 0x7DDC5DA3, 0x709F7B7A, 0x745E66CD,
+ 0x9823B6E0, 0x9CE2AB57, 0x91A18D8E, 0x95609039, 0x8B27C03C, 0x8FE6DD8B, 0x82A5FB52, 0x8664E6E5,
+ 0xBE2B5B58, 0xBAEA46EF, 0xB7A96036, 0xB3687D81, 0xAD2F2D84, 0xA9EE3033, 0xA4AD16EA, 0xA06C0B5D,
+ 0xD4326D90, 0xD0F37027, 0xDDB056FE, 0xD9714B49, 0xC7361B4C, 0xC3F706FB, 0xCEB42022, 0xCA753D95,
+ 0xF23A8028, 0xF6FB9D9F, 0xFBB8BB46, 0xFF79A6F1, 0xE13EF6F4, 0xE5FFEB43, 0xE8BCCD9A, 0xEC7DD02D,
+ 0x34867077, 0x30476DC0, 0x3D044B19, 0x39C556AE, 0x278206AB, 0x23431B1C, 0x2E003DC5, 0x2AC12072,
+ 0x128E9DCF, 0x164F8078, 0x1B0CA6A1, 0x1FCDBB16, 0x018AEB13, 0x054BF6A4, 0x0808D07D, 0x0CC9CDCA,
+ 0x7897AB07, 0x7C56B6B0, 0x71159069, 0x75D48DDE, 0x6B93DDDB, 0x6F52C06C, 0x6211E6B5, 0x66D0FB02,
+ 0x5E9F46BF, 0x5A5E5B08, 0x571D7DD1, 0x53DC6066, 0x4D9B3063, 0x495A2DD4, 0x44190B0D, 0x40D816BA,
+ 0xACA5C697, 0xA864DB20, 0xA527FDF9, 0xA1E6E04E, 0xBFA1B04B, 0xBB60ADFC, 0xB6238B25, 0xB2E29692,
+ 0x8AAD2B2F, 0x8E6C3698, 0x832F1041, 0x87EE0DF6, 0x99A95DF3, 0x9D684044, 0x902B669D, 0x94EA7B2A,
+ 0xE0B41DE7, 0xE4750050, 0xE9362689, 0xEDF73B3E, 0xF3B06B3B, 0xF771768C, 0xFA325055, 0xFEF34DE2,
+ 0xC6BCF05F, 0xC27DEDE8, 0xCF3ECB31, 0xCBFFD686, 0xD5B88683, 0xD1799B34, 0xDC3ABDED, 0xD8FBA05A,
+ 0x690CE0EE, 0x6DCDFD59, 0x608EDB80, 0x644FC637, 0x7A089632, 0x7EC98B85, 0x738AAD5C, 0x774BB0EB,
+ 0x4F040D56, 0x4BC510E1, 0x46863638, 0x42472B8F, 0x5C007B8A, 0x58C1663D, 0x558240E4, 0x51435D53,
+ 0x251D3B9E, 0x21DC2629, 0x2C9F00F0, 0x285E1D47, 0x36194D42, 0x32D850F5, 0x3F9B762C, 0x3B5A6B9B,
+ 0x0315D626, 0x07D4CB91, 0x0A97ED48, 0x0E56F0FF, 0x1011A0FA, 0x14D0BD4D, 0x19939B94, 0x1D528623,
+ 0xF12F560E, 0xF5EE4BB9, 0xF8AD6D60, 0xFC6C70D7, 0xE22B20D2, 0xE6EA3D65, 0xEBA91BBC, 0xEF68060B,
+ 0xD727BBB6, 0xD3E6A601, 0xDEA580D8, 0xDA649D6F, 0xC423CD6A, 0xC0E2D0DD, 0xCDA1F604, 0xC960EBB3,
+ 0xBD3E8D7E, 0xB9FF90C9, 0xB4BCB610, 0xB07DABA7, 0xAE3AFBA2, 0xAAFBE615, 0xA7B8C0CC, 0xA379DD7B,
+ 0x9B3660C6, 0x9FF77D71, 0x92B45BA8, 0x9675461F, 0x8832161A, 0x8CF30BAD, 0x81B02D74, 0x857130C3,
+ 0x5D8A9099, 0x594B8D2E, 0x5408ABF7, 0x50C9B640, 0x4E8EE645, 0x4A4FFBF2, 0x470CDD2B, 0x43CDC09C,
+ 0x7B827D21, 0x7F436096, 0x7200464F, 0x76C15BF8, 0x68860BFD, 0x6C47164A, 0x61043093, 0x65C52D24,
+ 0x119B4BE9, 0x155A565E, 0x18197087, 0x1CD86D30, 0x029F3D35, 0x065E2082, 0x0B1D065B, 0x0FDC1BEC,
+ 0x3793A651, 0x3352BBE6, 0x3E119D3F, 0x3AD08088, 0x2497D08D, 0x2056CD3A, 0x2D15EBE3, 0x29D4F654,
+ 0xC5A92679, 0xC1683BCE, 0xCC2B1D17, 0xC8EA00A0, 0xD6AD50A5, 0xD26C4D12, 0xDF2F6BCB, 0xDBEE767C,
+ 0xE3A1CBC1, 0xE760D676, 0xEA23F0AF, 0xEEE2ED18, 0xF0A5BD1D, 0xF464A0AA, 0xF9278673, 0xFDE69BC4,
+ 0x89B8FD09, 0x8D79E0BE, 0x803AC667, 0x84FBDBD0, 0x9ABC8BD5, 0x9E7D9662, 0x933EB0BB, 0x97FFAD0C,
+ 0xAFB010B1, 0xAB710D06, 0xA6322BDF, 0xA2F33668, 0xBCB4666D, 0xB8757BDA, 0xB5365D03, 0xB1F740B4,
+ };
+ uint32_t i;
+ uint32_t c = 0xffffffff;
+ for( i = 0; i < len; i++) {
+ c = t[ ((c >> 24) ^ p[ i]) & 0xff] ^ (c << 8);
+ }
+ return c;
+ }
+};
+
+
+class Bits {
+public:
+ static uint8_t get( uint8_t val, uint8_t offset, uint8_t mask) {
+ return (val >> offset) & mask;
+ }
+
+ static void set( uint8_t *addr, uint8_t val, uint8_t offset, uint8_t mask) {
+ uint8_t e = ~(mask << offset);
+ uint8_t tmp = (val & mask) << offset;
+
+ *addr &= e;
+ *addr |= tmp;
+ }
+};
+
+
+}
+
--- /dev/null
+#include <stdio.h>
+#include <stdlib.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <string.h>
+#include <iconv.h>
+
+#include "aribstr.h"
+
+#define CODE_UNKNOWN 0 // 不明なグラフィックセット(非対応)
+#define CODE_KANJI 1 // Kanji
+#define CODE_ALPHANUMERIC 2 // Alphanumeric
+#define CODE_HIRAGANA 3 // Hiragana
+#define CODE_KATAKANA 4 // Katakana
+#define CODE_MOSAIC_A 5 // Mosaic A
+#define CODE_MOSAIC_B 6 // Mosaic B
+#define CODE_MOSAIC_C 7 // Mosaic C
+#define CODE_MOSAIC_D 8 // Mosaic D
+#define CODE_PROP_ALPHANUMERIC 9 // Proportional Alphanumeric
+#define CODE_PROP_HIRAGANA 10 // Proportional Hiragana
+#define CODE_PROP_KATAKANA 11 // Proportional Katakana
+#define CODE_JIS_X0201_KATAKANA 12 // JIS X 0201 Katakana
+#define CODE_JIS_KANJI_PLANE_1 13 // JIS compatible Kanji Plane 1
+#define CODE_JIS_KANJI_PLANE_2 14 // JIS compatible Kanji Plane 2
+#define CODE_ADDITIONAL_SYMBOLS 15 // Additional symbols
+
+
+#define TCHAR char
+#define BYTE uint8_t
+#define WORD uint16_t
+#define DWORD uint32_t
+//#define bool int
+//#define true 1
+//#define false 0
+#define TEXT(a) a
+#define _T(a) a
+#define CODE_SET int
+
+static int m_CodeG[4];
+static int *m_pLockingGL;
+static int *m_pLockingGR;
+static int *m_pSingleGL;
+
+static BYTE m_byEscSeqCount;
+static BYTE m_byEscSeqIndex;
+static bool m_bIsEscSeqDrcs;
+
+
+static const DWORD AribToStringInternal( std::string *dst, const std::string *src);
+static const DWORD ProcessCharCode(TCHAR *lpszDst, const WORD wCode, const CODE_SET CodeSet);
+
+static const DWORD PutKanjiChar(TCHAR *lpszDst, const WORD wCode);
+static const DWORD PutAlphanumericChar(TCHAR *lpszDst, const WORD wCode);
+//static const DWORD PutAlphanumericHankakuChar(TCHAR *lpszDst, const WORD wCode);
+static const DWORD PutHiraganaChar(TCHAR *lpszDst, const WORD wCode);
+static const DWORD PutKatakanaChar(TCHAR *lpszDst, const WORD wCode);
+static const DWORD PutJisKatakanaChar(TCHAR *lpszDst, const WORD wCode);
+static const DWORD PutSymbolsChar(TCHAR *lpszDst, const WORD wCode);
+
+static void ProcessEscapeSeq(const BYTE byCode);
+
+static void LockingShiftGL(const BYTE byIndexG);
+static void LockingShiftGR(const BYTE byIndexG);
+static void SingleShiftGL(const BYTE byIndexG);
+
+static const bool DesignationGSET(const BYTE byIndexG, const BYTE byCode);
+static const bool DesignationDRCS(const BYTE byIndexG, const BYTE byCode);
+
+static const bool abCharSizeTable[] =
+{
+ false, // CODE_UNKNOWN 不明なグラフィックセット(非対応)
+ true, // CODE_KANJI Kanji
+ false, // CODE_ALPHANUMERIC Alphanumeric
+ false, // CODE_HIRAGANA Hiragana
+ false, // CODE_KATAKANA Katakana
+ false, // CODE_MOSAIC_A Mosaic A
+ false, // CODE_MOSAIC_B Mosaic B
+ false, // CODE_MOSAIC_C Mosaic C
+ false, // CODE_MOSAIC_D Mosaic D
+ false, // CODE_PROP_ALPHANUMERIC Proportional Alphanumeric
+ false, // CODE_PROP_HIRAGANA Proportional Hiragana
+ false, // CODE_PROP_KATAKANA Proportional Katakana
+ false, // CODE_JIS_X0201_KATAKANA JIS X 0201 Katakana
+ true, // CODE_JIS_KANJI_PLANE_1 JIS compatible Kanji Plane 1
+ true, // CODE_JIS_KANJI_PLANE_2 JIS compatible Kanji Plane 2
+ true // CODE_ADDITIONAL_SYMBOLS Additional symbols
+};
+
+typedef enum{
+ STR_SMALL = 0, //SSZ
+ STR_MEDIUM, //MSZ
+ STR_NORMAL, //NSZ
+ STR_MICRO, //SZX 0x60
+ STR_HIGH_W, //SZX 0x41
+ STR_WIDTH_W, //SZX 0x44
+ STR_W, //SZX 0x45
+ STR_SPECIAL_1, //SZX 0x6B
+ STR_SPECIAL_2, //SZX 0x64
+} STRING_SIZE;
+
+STRING_SIZE m_emStrSize;
+
+bool IsSmallCharMode(void)
+{
+ bool bRet = false;
+ switch(m_emStrSize){
+ case STR_SMALL:
+ bRet = true;
+ break;
+ case STR_MEDIUM:
+ bRet = true;
+ break;
+ case STR_NORMAL:
+ bRet = false;
+ break;
+ case STR_MICRO:
+ bRet = true;
+ break;
+ case STR_HIGH_W:
+ bRet = false;
+ break;
+ case STR_WIDTH_W:
+ bRet = false;
+ break;
+ case STR_W:
+ bRet = false;
+ break;
+ case STR_SPECIAL_1:
+ bRet = false;
+ break;
+ case STR_SPECIAL_2:
+ bRet = false;
+ break;
+ default:
+ break;
+ }
+ return bRet;
+}
+
+int AribToString(
+ std::string *dst,
+ const std::string *src) {
+
+ return AribToStringInternal(dst, src);
+}
+
+
+const DWORD AribToStringInternal( std::string *dst, const std::string *src)
+{
+ if(!src || !dst)return 0UL;
+
+ TCHAR buf[ 128];
+ DWORD dwSrcPos = 0UL;
+ DWORD dwDstLen = 0UL;
+ int dwSrcData;
+
+ // 状態初期設定
+ m_byEscSeqCount = 0U;
+ m_pSingleGL = NULL;
+
+ m_CodeG[0] = CODE_KANJI;
+ m_CodeG[1] = CODE_ALPHANUMERIC;
+ m_CodeG[2] = CODE_HIRAGANA;
+ m_CodeG[3] = CODE_KATAKANA;
+
+ m_pLockingGL = &m_CodeG[0];
+ m_pLockingGR = &m_CodeG[2];
+
+ m_emStrSize = STR_NORMAL;
+
+ dst->erase();
+ dst->reserve( src->size());
+
+ while(dwSrcPos < src->size()){
+ dwSrcData = (BYTE)src->at( dwSrcPos) & 0xFF;
+
+ if(!m_byEscSeqCount){
+
+ // GL/GR領域
+ if((dwSrcData >= 0x21U) && (dwSrcData <= 0x7EU)){
+ // GL領域
+ const CODE_SET CurCodeSet = (m_pSingleGL)? *m_pSingleGL : *m_pLockingGL;
+ m_pSingleGL = NULL;
+
+ if(abCharSizeTable[CurCodeSet]){
+ // 2バイトコード
+ if((src->size() - dwSrcPos) < 2UL)break;
+
+ dwDstLen = ProcessCharCode(buf, ((WORD)src->at( dwSrcPos + 0) << 8) | (WORD)src->at( dwSrcPos + 1), CurCodeSet);
+ buf[ dwDstLen] = '\0';
+ dst->append( buf);
+ dwSrcPos++;
+ }
+ else{
+ // 1バイトコード
+ dwDstLen = ProcessCharCode(buf, (WORD)dwSrcData, CurCodeSet);
+ buf[ dwDstLen] = '\0';
+ dst->append( buf);
+ }
+ }
+ else if((dwSrcData >= 0xA1U) && (dwSrcData <= 0xFEU)){
+ // GR領域
+ const CODE_SET CurCodeSet = *m_pLockingGR;
+
+ if(abCharSizeTable[CurCodeSet]){
+ // 2バイトコード
+ if((src->size() - dwSrcPos) < 2UL)break;
+
+ dwDstLen = ProcessCharCode(buf, ((WORD)(src->at( dwSrcPos + 0) & 0x7FU) << 8) | (WORD)(src->at( dwSrcPos + 1) & 0x7FU), CurCodeSet);
+ buf[ dwDstLen] = '\0';
+ dst->append( buf);
+ dwSrcPos++;
+ }
+ else{
+ // 1バイトコード
+ dwDstLen = ProcessCharCode(buf, (WORD)(dwSrcData & 0x7FU), CurCodeSet);
+ buf[ dwDstLen] = '\0';
+ dst->append( buf);
+ }
+ }
+ else{
+ // 制御コード
+ switch(dwSrcData){
+ case 0x0FU : LockingShiftGL(0U); break; // LS0
+ case 0x0EU : LockingShiftGL(1U); break; // LS1
+ case 0x19U : SingleShiftGL(2U); break; // SS2
+ case 0x1DU : SingleShiftGL(3U); break; // SS3
+ case 0x1BU : m_byEscSeqCount = 1U; break; // ESC
+ case 0x89U : m_emStrSize = STR_MEDIUM; break; // MSZ
+ case 0x8AU : m_emStrSize = STR_NORMAL; break; // NSZ
+ case 0x20U :
+ case 0xA0U :
+ //SP 空白
+ //空白は文字サイズの影響あり
+ if( IsSmallCharMode() == false ){
+ strcpy(buf, " ");
+ } else {
+ strcpy(buf, " ");
+ }
+ dst->append( buf);
+ break;
+ default : break; // 非対応
+ }
+ }
+ }
+ else{
+ // エスケープシーケンス処理
+ ProcessEscapeSeq(dwSrcData);
+ }
+
+ dwSrcPos++;
+ }
+
+ // 終端文字
+ //lpszDst[dwDstLen] = TEXT('\0');
+
+ return dst->size();
+}
+
+const DWORD ProcessCharCode(TCHAR *lpszDst, const WORD wCode, const CODE_SET CodeSet)
+{
+ switch(CodeSet){
+ case CODE_KANJI :
+ case CODE_JIS_KANJI_PLANE_1 :
+ case CODE_JIS_KANJI_PLANE_2 :
+ // 漢字コード出力
+ return PutKanjiChar(lpszDst, wCode);
+
+ case CODE_ALPHANUMERIC :
+ case CODE_PROP_ALPHANUMERIC :
+ // 英数字コード出力
+ if( IsSmallCharMode() == false ){
+ //全角テーブルコード取得
+ return PutAlphanumericChar(lpszDst, wCode);
+ } else {
+ //半角はそのまま出力
+ lpszDst[0] = wCode;
+ return 1UL;
+ }
+
+ case CODE_HIRAGANA :
+ case CODE_PROP_HIRAGANA :
+ // ひらがなコード出力
+ return PutHiraganaChar(lpszDst, wCode);
+
+ case CODE_PROP_KATAKANA :
+ case CODE_KATAKANA :
+ // カタカナコード出力
+ return PutKatakanaChar(lpszDst, wCode);
+
+ case CODE_JIS_X0201_KATAKANA :
+ // JISカタカナコード出力
+ return PutJisKatakanaChar(lpszDst, wCode);
+
+ case CODE_ADDITIONAL_SYMBOLS :
+ // 追加シンボルコード出力
+ return PutSymbolsChar(lpszDst, wCode);
+
+ default :
+ return 0UL;
+ }
+}
+
+const DWORD PutKanjiChar(TCHAR *lpszDst, const WORD wCode)
+{
+ char code[9];
+ char xcode[16];
+ iconv_t cd;
+
+ size_t inbyte = 8;
+ size_t outbyte = sizeof(xcode - 1);
+
+ memset(xcode, '\0', sizeof(xcode));
+
+ char *fptr;
+ char *tptr;
+
+ code[0] = 0x1BU;
+ code[1] = 0x24U;
+ code[2] = 0x40U;
+ code[3] = wCode >> 8;
+ code[4] = wCode & 0xFF;
+ code[5] = 0x1BU;
+ code[6] = 0x28U;
+ code[7] = 0x4AU;
+ code[8] = '\0';
+
+ cd = iconv_open("UTF-8","ISO-2022-JP");
+
+ fptr = code;
+ tptr = xcode;
+ iconv(cd, &fptr, &inbyte, &tptr, &outbyte);
+
+ iconv_close(cd);
+
+ strcpy(lpszDst, xcode);
+
+ return strlen(lpszDst);
+}
+
+const DWORD PutAlphanumericChar(TCHAR *lpszDst, const WORD wCode)
+{
+ // 英数字全角文字コード変換
+ static const TCHAR *acAlphanumericTable =
+ TEXT(" ")
+ TEXT(" ")
+ TEXT(" ！”＃＄％＆’（）＊＋，－．／")
+ TEXT("０１２３４５６７８９：；＜＝＞？")
+ TEXT("＠ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯ")
+ TEXT("ＰＱＲＳＴＵＶＷＸＹＺ［￥］＾＿")
+ TEXT(" ａｂｃｄｅｆｇｈｉｊｋｌｍｎｏ")
+ TEXT("ｐｑｒｓｔｕｖｗｘｙｚ｛｜｝￣ ");
+
+#ifdef _UNICODE
+ lpszDst[0] = acAlphanumericTableZenkaku[wCode];
+
+ return 1UL;
+#else
+ lpszDst[0] = acAlphanumericTable[wCode * 3U + 0U];
+ lpszDst[1] = acAlphanumericTable[wCode * 3U + 1U];
+ lpszDst[2] = acAlphanumericTable[wCode * 3U + 2U];
+
+ return 3UL;
+#endif
+}
+
+const DWORD PutHiraganaChar(TCHAR *lpszDst, const WORD wCode)
+{
+ // ひらがな文字コード変換
+ static const TCHAR *acHiraganaTable =
+ TEXT(" ")
+ TEXT(" ")
+ TEXT(" ぁあぃいぅうぇえぉおかがきぎく")
+ TEXT("ぐけげこごさざしじすずせぜそぞた")
+ TEXT("だちぢっつづてでとどなにぬねのは")
+ TEXT("ばぱひびぴふぶぷへべぺほぼぽまみ")
+ TEXT("むめもゃやゅゆょよらりるれろゎわ")
+ TEXT("ゐゑをん ゝゞー。「」、・ ");
+
+#ifdef _UNICODE
+ lpszDst[0] = acHiraganaTable[wCode];
+
+ return 1UL;
+#else
+ lpszDst[0] = acHiraganaTable[wCode * 3U + 0U];
+ lpszDst[1] = acHiraganaTable[wCode * 3U + 1U];
+ lpszDst[2] = acHiraganaTable[wCode * 3U + 2U];
+
+ return 3UL;
+#endif
+}
+
+const DWORD PutKatakanaChar(TCHAR *lpszDst, const WORD wCode)
+{
+ // カタカナ英数字文字コード変換
+ static const TCHAR *acKatakanaTable =
+ TEXT(" ")
+ TEXT(" ")
+ TEXT(" ァアィイゥウェエォオカガキギク")
+ TEXT("グケゲコゴサザシジスズセゼソゾタ")
+ TEXT("ダチヂッツヅテデトドナニヌネノハ")
+ TEXT("バパヒビピフブプヘベペホボポマミ")
+ TEXT("ムメモャヤュユョヨラリルレロヮワ")
+ TEXT("ヰヱヲンヴヵヶヽヾー。「」、・ ");
+
+#ifdef _UNICODE
+ lpszDst[0] = acKatakanaTable[wCode];
+
+ return 1UL;
+#else
+ lpszDst[0] = acKatakanaTable[wCode * 3U + 0U];
+ lpszDst[1] = acKatakanaTable[wCode * 3U + 1U];
+ lpszDst[2] = acKatakanaTable[wCode * 3U + 2U];
+
+ return 3UL;
+#endif
+}
+
+const DWORD PutJisKatakanaChar(TCHAR *lpszDst, const WORD wCode)
+{
+ // JISカタカナ文字コード変換
+ static const TCHAR *acJisKatakanaTable =
+ TEXT(" ")
+ TEXT(" ")
+ TEXT(" 。「」、・ヲァィゥェォャュョッ")
+ TEXT("ーアイウエオカキクケコサシスセソ")
+ TEXT("タチツテトナニヌネノハヒフヘホマ")
+ TEXT("ミムメモヤユヨラリルレロワン゛゜")
+ TEXT(" ")
+ TEXT(" ");
+
+#ifdef _UNICODE
+ lpszDst[0] = acJisKatakanaTable[wCode];
+
+ return 1UL;
+#else
+ lpszDst[0] = acJisKatakanaTable[wCode * 3U + 0U];
+ lpszDst[1] = acJisKatakanaTable[wCode * 3U + 1U];
+ lpszDst[2] = acJisKatakanaTable[wCode * 3U + 2U];
+
+ return 3UL;
+#endif
+}
+
+const DWORD PutSymbolsChar(TCHAR *lpszDst, const WORD wCode)
+{
+ // 追加シンボル文字コード変換(とりあえず必要そうなものだけ)
+ static const TCHAR *aszSymbolsTable1[] =
+ {
+ _T("【HV】"), _T("【SD】"), _T("【Ｐ】"), _T("【Ｗ】"), _T("【MV】"), _T("【手】"), _T("【字】"), _T("【双】"), // 0x7A50 - 0x7A57 90/48 - 90/55
+ _T("【デ】"), _T("【Ｓ】"), _T("【二】"), _T("【多】"), _T("【解】"), _T("【SS】"), _T("【Ｂ】"), _T("【Ｎ】"), // 0x7A58 - 0x7A5F 90/56 - 90/63
+ _T("■"), _T("●"), _T("【天】"), _T("【交】"), _T("【映】"), _T("【無】"), _T("【料】"), _T("【年齢制限】"), // 0x7A60 - 0x7A67 90/64 - 90/71
+ _T("【前】"), _T("【後】"), _T("【再】"), _T("【新】"), _T("【初】"), _T("【終】"), _T("【生】"), _T("【販】"), // 0x7A68 - 0x7A6F 90/72 - 90/79
+ _T("【声】"), _T("【吹】"), _T("【PPV】"), _T("（秘）"), _T("ほか") // 0x7A70 - 0x7A74 90/80 - 90/84
+ };
+
+ static const TCHAR *aszSymbolsTable2[] =
+ {
+ _T("→"), _T("←"), _T("↑"), _T("↓"), _T("●"), _T("○"), _T("年"), _T("月"), // 0x7C21 - 0x7C28 92/01 - 92/08
+ _T("日"), _T("円"), _T("㎡"), _T("㎥"), _T("㎝"), _T("㎠"), _T("㎤"), _T("０."), // 0x7C29 - 0x7C30 92/09 - 92/16
+ _T("１."), _T("２."), _T("３."), _T("４."), _T("５."), _T("６."), _T("７."), _T("８."), // 0x7C31 - 0x7C38 92/17 - 92/24
+ _T("９."), _T("氏"), _T("副"), _T("元"), _T("故"), _T("前"), _T("新"), _T("０,"), // 0x7C39 - 0x7C40 92/25 - 92/32
+ _T("１,"), _T("２,"), _T("３,"), _T("４,"), _T("５,"), _T("６,"), _T("７,"), _T("８,"), // 0x7C41 - 0x7C48 92/33 - 92/40
+ _T("９,"), _T("(社)"), _T("(財)"), _T("(有)"), _T("(株)"), _T("(代)"), _T("(問)"), _T("▶"), // 0x7C49 - 0x7C50 92/41 - 92/48
+ _T("◀"), _T("〖"), _T("〗"), _T("⟐"), _T("^2"), _T("^3"), _T("(CD)"), _T("(vn)"), // 0x7C51 - 0x7C58 92/49 - 92/56
+ _T("(ob)"), _T("(cb)"), _T("(ce"), _T("mb)"), _T("(hp)"), _T("(br)"), _T("(p)"), _T("(s)"), // 0x7C59 - 0x7C60 92/57 - 92/64
+ _T("(ms)"), _T("(t)"), _T("(bs)"), _T("(b)"), _T("(tb)"), _T("(tp)"), _T("(ds)"), _T("(ag)"), // 0x7C61 - 0x7C68 92/65 - 92/72
+ _T("(eg)"), _T("(vo)"), _T("(fl)"), _T("(ke"), _T("y)"), _T("(sa"), _T("x)"), _T("(sy"), // 0x7C69 - 0x7C70 92/73 - 92/80
+ _T("n)"), _T("(or"), _T("g)"), _T("(pe"), _T("r)"), _T("(R)"), _T("(C)"), _T("(箏)"), // 0x7C71 - 0x7C78 92/81 - 92/88
+ _T("DJ"), _T("[演]"), _T("Fax") // 0x7C79 - 0x7C7B 92/89 - 92/91
+ };
+
+ static const TCHAR *aszSymbolsTable3[] =
+ {
+ _T("㈪"), _T("㈫"), _T("㈬"), _T("㈭"), _T("㈮"), _T("㈯"), _T("㈰"), _T("㈷"), // 0x7D21 - 0x7D28 93/01 - 93/08
+ _T("㍾"), _T("㍽"), _T("㍼"), _T("㍻"), _T("№"), _T("℡"), _T("〶"), _T("○"), // 0x7D29 - 0x7D30 93/09 - 93/16
+ _T("〔本〕"), _T("〔三〕"), _T("〔二〕"), _T("〔安〕"), _T("〔点〕"), _T("〔打〕"), _T("〔盗〕"), _T("〔勝〕"), // 0x7D31 - 0x7D38 93/17 - 93/24
+ _T("〔敗〕"), _T("〔Ｓ〕"), _T("［投］"), _T("［捕］"), _T("［一］"), _T("［二］"), _T("［三］"), _T("［遊］"), // 0x7D39 - 0x7D40 93/25 - 93/32
+ _T("［左］"), _T("［中］"), _T("［右］"), _T("［指］"), _T("［走］"), _T("［打］"), _T("㍑"), _T("㎏"), // 0x7D41 - 0x7D48 93/33 - 93/40
+ _T("㎐"), _T("ha"), _T("㎞"), _T("㎢"), _T("㍱"), _T("・"), _T("・"), _T("1/2"), // 0x7D49 - 0x7D50 93/41 - 93/48
+ _T("0/3"), _T("1/3"), _T("2/3"), _T("1/4"), _T("3/4"), _T("1/5"), _T("2/5"), _T("3/5"), // 0x7D51 - 0x7D58 93/49 - 93/56
+ _T("4/5"), _T("1/6"), _T("5/6"), _T("1/7"), _T("1/8"), _T("1/9"), _T("1/10"), _T("☀"), // 0x7D59 - 0x7D60 93/57 - 93/64
+ _T("☁"), _T("☂"), _T("☃"), _T("☖"), _T("☗"), _T("▽"), _T("▼"), _T("♦"), // 0x7D61 - 0x7D68 93/65 - 93/72
+ _T("♥"), _T("♣"), _T("♠"), _T("⌺"), _T("⦿"), _T("‼"), _T("⁉"), _T("(曇/晴)"), // 0x7D69 - 0x7D70 93/73 - 93/80
+ _T("☔"), _T("(雨)"), _T("(雪)"), _T("(大雪)"), _T("⚡"), _T("(雷雨)"), _T(" "), _T("・"), // 0x7D71 - 0x7D78 93/81 - 93/88
+ _T("・"), _T("♬"), _T("☎") // 0x7D79 - 0x7D7B 93/89 - 93/91
+ };
+
+ static const TCHAR *aszSymbolsTable4[] =
+ {
+ _T("Ⅰ"), _T("Ⅱ"), _T("Ⅲ"), _T("Ⅳ"), _T("Ⅴ"), _T("Ⅵ"), _T("Ⅶ"), _T("Ⅷ"), // 0x7E21 - 0x7E28 94/01 - 94/08
+ _T("Ⅸ"), _T("Ⅹ"), _T("Ⅺ"), _T("Ⅻ"), _T("⑰"), _T("⑱"), _T("⑲"), _T("⑳"), // 0x7E29 - 0x7E30 94/09 - 94/16
+ _T("⑴"), _T("⑵"), _T("⑶"), _T("⑷"), _T("⑸"), _T("⑹"), _T("⑺"), _T("⑻"), // 0x7E31 - 0x7E38 94/17 - 94/24
+ _T("⑼"), _T("⑽"), _T("⑾"), _T("⑿"), _T("㉑"), _T("㉒"), _T("㉓"), _T("㉔"), // 0x7E39 - 0x7E40 94/25 - 94/32
+ _T("(A)"), _T("(B)"), _T("(C)"), _T("(D)"), _T("(E)"), _T("(F)"), _T("(G)"), _T("(H)"), // 0x7E41 - 0x7E48 94/33 - 94/40
+ _T("(I)"), _T("(J)"), _T("(K)"), _T("(L)"), _T("(M)"), _T("(N)"), _T("(O)"), _T("(P)"), // 0x7E49 - 0x7E50 94/41 - 94/48
+ _T("(Q)"), _T("(R)"), _T("(S)"), _T("(T)"), _T("(U)"), _T("(V)"), _T("(W)"), _T("(X)"), // 0x7E51 - 0x7E58 94/49 - 94/56
+ _T("(Y)"), _T("(Z)"), _T("㉕"), _T("㉖"), _T("㉗"), _T("㉘"), _T("㉙"), _T("㉚"), // 0x7E59 - 0x7E60 94/57 - 94/64
+ _T("①"), _T("②"), _T("③"), _T("④"), _T("⑤"), _T("⑥"), _T("⑦"), _T("⑧"), // 0x7E61 - 0x7E68 94/65 - 94/72
+ _T("⑨"), _T("⑩"), _T("⑪"), _T("⑫"), _T("⑬"), _T("⑭"), _T("⑮"), _T("⑯"), // 0x7E69 - 0x7E70 94/73 - 94/80
+ _T("❶"), _T("❷"), _T("❸"), _T("❹"), _T("❺"), _T("❻"), _T("❼"), _T("❽"), // 0x7E71 - 0x7E78 94/81 - 94/88
+ _T("❾"), _T("❿"), _T("⓫"), _T("⓬"), _T("㉛") // 0x7E79 - 0x7E7D 94/89 - 94/93
+ };
+
+ static const TCHAR *aszSymbolsTable5[] =
+ {
+ _T("㐂"), _T("亭"), _T("份"), _T("仿"), _T("侚"), _T("俉"), _T("傜"), _T("儞"), // 0x7521 - 0x7528 85/01 - 85/08
+ _T("冼"), _T("㔟"), _T("匇"), _T("卡"), _T("卬"), _T("詹"), _T("吉"), _T("呍"), // 0x7529 - 0x7530 85/09 - 85/16
+ _T("咖"), _T("咜"), _T("咩"), _T("唎"), _T("啊"), _T("噲"), _T("囤"), _T("圳"), // 0x7531 - 0x7538 85/17 - 85/24
+ _T("圴"), _T("塚"), _T("墀"), _T("姤"), _T("娣"), _T("婕"), _T("寬"), _T("﨑"), // 0x7539 - 0x7540 85/25 - 85/32
+ _T("㟢"), _T("庬"), _T("弴"), _T("彅"), _T("德"), _T("怗"), _T("恵"), _T("愰"), // 0x7541 - 0x7548 85/33 - 85/40
+ _T("昤"), _T("曈"), _T("曙"), _T("曺"), _T("曻"), _T("桒"), _T("・"), _T("椑"), // 0x7549 - 0x7550 85/41 - 85/48
+ _T("椻"), _T("橅"), _T("檑"), _T("櫛"), _T("・"), _T("・"), _T("・"), _T("毱"), // 0x7551 - 0x7558 85/49 - 85/56
+ _T("泠"), _T("洮"), _T("海"), _T("涿"), _T("淊"), _T("淸"), _T("渚"), _T("潞"), // 0x7559 - 0x7560 85/57 - 85/64
+ _T("濹"), _T("灤"), _T("・"), _T("・"), _T("煇"), _T("燁"), _T("爀"), _T("玟"), // 0x7561 - 0x7568 85/65 - 85/72
+ _T("・"), _T("珉"), _T("珖"), _T("琛"), _T("琡"), _T("琢"), _T("琦"), _T("琪"), // 0x7569 - 0x7570 85/73 - 85/80
+ _T("琬"), _T("琹"), _T("瑋"), _T("㻚"), _T("畵"), _T("疁"), _T("睲"), _T("䂓"), // 0x7571 - 0x7578 85/81 - 85/88
+ _T("磈"), _T("磠"), _T("祇"), _T("禮"), _T("・"), _T("・") // 0x7579 - 0x757E 85/89 - 85/94
+ };
+
+ static const TCHAR *aszSymbolsTable6[] =
+ {
+ _T("・"), _T("秚"), _T("稞"), _T("筿"), _T("簱"), _T("䉤"), _T("綋"), _T("羡"), // 0x7621 - 0x7628 86/01 - 86/08
+ _T("脘"), _T("脺"), _T("・"), _T("芮"), _T("葛"), _T("蓜"), _T("蓬"), _T("蕙"), // 0x7629 - 0x7630 86/09 - 86/16
+ _T("藎"), _T("蝕"), _T("蟬"), _T("蠋"), _T("裵"), _T("角"), _T("諶"), _T("跎"), // 0x7631 - 0x7638 86/17 - 86/24
+ _T("辻"), _T("迶"), _T("郝"), _T("鄧"), _T("鄭"), _T("醲"), _T("鈳"), _T("銈"), // 0x7639 - 0x7640 86/25 - 86/32
+ _T("錡"), _T("鍈"), _T("閒"), _T("雞"), _T("餃"), _T("饀"), _T("髙"), _T("鯖"), // 0x7641 - 0x7648 86/33 - 86/40
+ _T("鷗"), _T("麴"), _T("麵") // 0x7649 - 0x764B 86/41 - 86/43
+ };
+
+ // シンボルを変換する
+ if((wCode >= 0x7A50U) && (wCode <= 0x7A74U)){
+ strcpy(lpszDst, aszSymbolsTable1[wCode - 0x7A50U]);
+ }
+ else if((wCode >= 0x7C21U) && (wCode <= 0x7C7BU)){
+ strcpy(lpszDst, aszSymbolsTable2[wCode - 0x7C21U]);
+ }
+ else if((wCode >= 0x7D21U) && (wCode <= 0x7D7BU)){
+ strcpy(lpszDst, aszSymbolsTable3[wCode - 0x7D21U]);
+ }
+ else if((wCode >= 0x7E21U) && (wCode <= 0x7E7DU)){
+ strcpy(lpszDst, aszSymbolsTable4[wCode - 0x7E21U]);
+ }
+ else if((wCode >= 0x7521U) && (wCode <= 0x757EU)){
+ strcpy(lpszDst, aszSymbolsTable5[wCode - 0x7521U]);
+ }
+ else if((wCode >= 0x7621U) && (wCode <= 0x764BU)){
+ strcpy(lpszDst, aszSymbolsTable6[wCode - 0x7621U]);
+ }
+ else{
+ strcpy(lpszDst, TEXT("・"));
+ }
+
+ return strlen(lpszDst);
+}
+
+void ProcessEscapeSeq(const BYTE byCode)
+{
+ // エスケープシーケンス処理
+ switch(m_byEscSeqCount){
+ // 1バイト目
+ case 1U :
+ switch(byCode){
+ // Invocation of code elements
+ case 0x6EU : LockingShiftGL(2U); m_byEscSeqCount = 0U; return; // LS2
+ case 0x6FU : LockingShiftGL(3U); m_byEscSeqCount = 0U; return; // LS3
+ case 0x7EU : LockingShiftGR(1U); m_byEscSeqCount = 0U; return; // LS1R
+ case 0x7DU : LockingShiftGR(2U); m_byEscSeqCount = 0U; return; // LS2R
+ case 0x7CU : LockingShiftGR(3U); m_byEscSeqCount = 0U; return; // LS3R
+
+ // Designation of graphic sets
+ case 0x24U :
+ case 0x28U : m_byEscSeqIndex = 0U; break;
+ case 0x29U : m_byEscSeqIndex = 1U; break;
+ case 0x2AU : m_byEscSeqIndex = 2U; break;
+ case 0x2BU : m_byEscSeqIndex = 3U; break;
+ default : m_byEscSeqCount = 0U; return; // エラー
+ }
+ break;
+
+ // 2バイト目
+ case 2U :
+ if(DesignationGSET(m_byEscSeqIndex, byCode)){
+ m_byEscSeqCount = 0U;
+ return;
+ }
+
+ switch(byCode){
+ case 0x20 : m_bIsEscSeqDrcs = true; break;
+ case 0x28 : m_bIsEscSeqDrcs = true; m_byEscSeqIndex = 0U; break;
+ case 0x29 : m_bIsEscSeqDrcs = false; m_byEscSeqIndex = 1U; break;
+ case 0x2A : m_bIsEscSeqDrcs = false; m_byEscSeqIndex = 2U; break;
+ case 0x2B : m_bIsEscSeqDrcs = false; m_byEscSeqIndex = 3U; break;
+ default : m_byEscSeqCount = 0U; return; // エラー
+ }
+ break;
+
+ // 3バイト目
+ case 3U :
+ if(!m_bIsEscSeqDrcs){
+ if(DesignationGSET(m_byEscSeqIndex, byCode)){
+ m_byEscSeqCount = 0U;
+ return;
+ }
+ }
+ else{
+ if(DesignationDRCS(m_byEscSeqIndex, byCode)){
+ m_byEscSeqCount = 0U;
+ return;
+ }
+ }
+
+ if(byCode == 0x20U){
+ m_bIsEscSeqDrcs = true;
+ }
+ else{
+ // エラー
+ m_byEscSeqCount = 0U;
+ return;
+ }
+ break;
+
+ // 4バイト目
+ case 4U :
+ DesignationDRCS(m_byEscSeqIndex, byCode);
+ m_byEscSeqCount = 0U;
+ return;
+ }
+
+ m_byEscSeqCount++;
+}
+
+void LockingShiftGL(const BYTE byIndexG)
+{
+ // LSx
+ m_pLockingGL = &m_CodeG[byIndexG];
+}
+
+void LockingShiftGR(const BYTE byIndexG)
+{
+ // LSxR
+ m_pLockingGR = &m_CodeG[byIndexG];
+}
+
+void SingleShiftGL(const BYTE byIndexG)
+{
+ // SSx
+ m_pSingleGL = &m_CodeG[byIndexG];
+}
+
+const bool DesignationGSET(const BYTE byIndexG, const BYTE byCode)
+{
+ // Gのグラフィックセットを割り当てる
+ switch(byCode){
+ case 0x42U : m_CodeG[byIndexG] = CODE_KANJI; return true; // Kanji
+ case 0x4AU : m_CodeG[byIndexG] = CODE_ALPHANUMERIC; return true; // Alphanumeric
+ case 0x30U : m_CodeG[byIndexG] = CODE_HIRAGANA; return true; // Hiragana
+ case 0x31U : m_CodeG[byIndexG] = CODE_KATAKANA; return true; // Katakana
+ case 0x32U : m_CodeG[byIndexG] = CODE_MOSAIC_A; return true; // Mosaic A
+ case 0x33U : m_CodeG[byIndexG] = CODE_MOSAIC_B; return true; // Mosaic B
+ case 0x34U : m_CodeG[byIndexG] = CODE_MOSAIC_C; return true; // Mosaic C
+ case 0x35U : m_CodeG[byIndexG] = CODE_MOSAIC_D; return true; // Mosaic D
+ case 0x36U : m_CodeG[byIndexG] = CODE_PROP_ALPHANUMERIC; return true; // Proportional Alphanumeric
+ case 0x37U : m_CodeG[byIndexG] = CODE_PROP_HIRAGANA; return true; // Proportional Hiragana
+ case 0x38U : m_CodeG[byIndexG] = CODE_PROP_KATAKANA; return true; // Proportional Katakana
+ case 0x49U : m_CodeG[byIndexG] = CODE_JIS_X0201_KATAKANA; return true; // JIS X 0201 Katakana
+ case 0x39U : m_CodeG[byIndexG] = CODE_JIS_KANJI_PLANE_1; return true; // JIS compatible Kanji Plane 1
+ case 0x3AU : m_CodeG[byIndexG] = CODE_JIS_KANJI_PLANE_2; return true; // JIS compatible Kanji Plane 2
+ case 0x3BU : m_CodeG[byIndexG] = CODE_ADDITIONAL_SYMBOLS; return true; // Additional symbols
+ default : return false; // 不明なグラフィックセット
+ }
+}
+
+const bool DesignationDRCS(const BYTE byIndexG, const BYTE byCode)
+{
+ // DRCSのグラフィックセットを割り当てる
+ switch(byCode){
+ case 0x40U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-0
+ case 0x41U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-1
+ case 0x42U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-2
+ case 0x43U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-3
+ case 0x44U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-4
+ case 0x45U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-5
+ case 0x46U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-6
+ case 0x47U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-7
+ case 0x48U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-8
+ case 0x49U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-9
+ case 0x4AU : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-10
+ case 0x4BU : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-11
+ case 0x4CU : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-12
+ case 0x4DU : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-13
+ case 0x4EU : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-14
+ case 0x4FU : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // DRCS-15
+ case 0x70U : m_CodeG[byIndexG] = CODE_UNKNOWN; return true; // Macro
+ default : return false; // 不明なグラフィックセット
+}
+}
--- /dev/null
+#ifndef ARIBSTR_H
+#define ARIBSTR_H 1
+
+#include <string>
+
+ //int AribToString(char *lpszDst, const char *pSrcData, const int dwSrcLen);
+int AribToString( std::string *dst, const std::string *src);
+
+#endif
--- /dev/null
+
+#include <inttypes.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include "epg.h"
+
+
+void printUsage( void)
+{
+ const char *usage =
+ "Usage:\n"
+ " eit2xml < BS | CS > < TS file > < XML file >\n"
+ " eit2xml < channel > < TS file > < XML file >\n"
+ " BS : BS\n"
+ " CS : CS\n"
+ " channel: channel id";
+
+ fprintf( stdout, "%s\n", usage);
+}
+
+
+int main( int argc, char **argv)
+{
+ int ts_fd, xml_fd;
+ char *channel;
+ char *ts_file;
+ char *xml_file;
+
+ const uint32_t buf_size = TS::TSPacket::TS_PACKET_SIZE * 20;
+
+ uint8_t buf[ buf_size];
+ uint32_t index = 0;
+ uint32_t read_len;
+ int32_t offset = 0;
+ ssize_t file_read_size;
+ bool err = false;
+ TSPacket *ts = NULL;
+ EPG *epg = NULL;
+
+ if( argc != 4) {
+ printUsage();
+ return 1;
+ }
+
+ channel = argv[ 1];
+ ts_file = argv[ 2];
+ xml_file = argv[ 3];
+
+ if( strcmp( ts_file, "-") == 0) {
+ ts_fd = 0;
+ }
+ else {
+ ts_fd = open( ts_file, O_RDONLY);
+ if( ts_fd == -1) {
+ fprintf( stderr, "Cannot open %s.\n", ts_file);
+ return 1;
+ }
+ }
+
+ epg = new EPG( channel);
+
+ while( (file_read_size = read( ts_fd, buf + offset, buf_size - offset) + offset) > 0 ) {
+ index = 0;
+ while( index + TS::TSPacket::TS_PACKET_SIZE <= file_read_size) {
+ if( ts) {
+ delete ts;
+ }
+
+ ts = TS::TSPacket::parse( &buf[ index], file_read_size - index, &read_len);
+ if( !ts) {
+ if( file_read_size - index <= TS::TSPacket::TS_PACKET_SIZE) {
+ break;
+ }
+ index += TS::TSPacket::TS_PACKET_SIZE;
+ }
+ else {
+ index += read_len;
+ if( !epg->append( ts)) {
+ //err = true;
+ //break;
+ }
+ }
+ }
+ if( err) {
+ break;
+ }
+
+ offset = file_read_size - index;
+ if( offset > 0) {
+ memmove( buf, buf + index, offset);
+ }
+ }
+
+EXIT:
+ if( ts) {
+ delete ts;
+ ts = NULL;
+ }
+ if( epg) {
+ epg->write( xml_file);
+ delete epg;
+ }
+
+ if( ts_fd != 0) {
+ close( ts_fd);
+ }
+
+ return 0;
+}
+
--- /dev/null
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sstream>
+
+#include "epg.h"
+#include "aribstr.h"
+
+
+const uint16_t EPG::EIT_PID[ EIT_PID_NUM] = {
+ 0x0012, 0x0026, 0x0027,
+};
+
+const EPG::CONTENT EPG::contents[ CONTENT_NUM] = {
+ { "ニュース・報道" , "news" , },
+ { "スポーツ" , "sports" , },
+ { "情報" , "information", },
+ { "ドラマ" , "drama" , },
+ { "音楽" , "music" , },
+ { "バラエティ" , "variety" , },
+ { "映画" , "cinema" , },
+ { "アニメ・特撮" , "anime" , },
+ { "ドキュメンタリー・教養", "documentary", },
+ { "演劇" , "stage" , },
+ { "趣味・実用" , "hobby" , },
+ { "福祉" , "etc" , },
+ { "予備" , "etc" , },
+ { "予備" , "etc" , },
+ { "予備" , "etc" , },
+ { "その他" , "etc" , },
+};
+
+EPG::EPG( std::string ch)
+ : channel( ch)
+{
+ int32_t i;
+
+ sdt = new SDT( &descriptor_parser);
+
+ for( i = 0; i < EIT_PID_NUM; i++) {
+ eits[ EIT_PID[ i]] = new EIT( &descriptor_parser);
+ }
+}
+
+EPG::~EPG()
+{
+ EITS::iterator e;
+
+ if( sdt) {
+ delete sdt;
+ }
+
+ for( e = eits.begin(); e != eits.end(); e++) {
+ if( e->second) {
+ delete e->second;
+ }
+ }
+ eits.clear();
+}
+
+bool EPG::append( TSPacket *ts)
+{
+ int32_t i;
+ uint16_t pid = ts->getPID();
+
+ Section::STATUS status;
+
+ if( pid == SDT_PID) {
+ return appendSDT( ts);
+ }
+
+ for( i = 0; i < EIT_PID_NUM; i++) {
+ if( pid == EIT_PID[ i]) {
+ return appendEIT( ts);
+ }
+ }
+
+ return true;
+}
+
+
+bool EPG::appendSDT( TS::TSPacket *ts)
+{
+ Section::STATUS status;
+ uint32_t index = 0;
+
+ do {
+ status = sdt->append( ts, &index);
+ if( status == Section::SUCCESS || status == Section::INCLUDE_NEW_SECTION) {
+ SDT::SERVICES::iterator s;
+ SDT::DESCRIPTORS::iterator d;
+ for( s = sdt->services.begin(); s != sdt->services.end(); s++) {
+ if( s->EIT_schedule_flag != 0x01) {
+ continue;
+ }
+
+ for( d = s->descriptors.begin(); d != s->descriptors.end(); d++) {
+ if( (*d)->descriptor_tag == Service::TAG) {
+ Service *des = (Service *)*d;
+ if( des->service_type == 0x01) {
+ SERVICE tmp;
+
+ tmp.transport_stream_id = sdt->si_id.transport_stream_id;
+ tmp.original_network_id = sdt->original_network_id;
+ tmp.service_id = s->service_id;
+
+ if( services.find( tmp) == services.end()) {
+ std::string name = "";
+
+ if( des->service_name_length != 0) {
+ AribToString( &name, &des->service_name);
+ }
+ else if( des->service_provider_name_length != 0) {
+ AribToString( &name, &des->service_provider_name);
+ }
+ services[ tmp] = name;
+ }
+ }
+ break;
+ }
+ }
+ }
+ }
+ else if( status == Section::CONTINUE) {
+ return true;
+ }
+ else if( status == Section::ERROR_START_SECTION) {
+ return true;
+ }
+ else {
+ sdt->clear();
+ return false;
+ }
+ } while( status == Section::INCLUDE_NEW_SECTION);
+
+ return true;
+}
+
+bool EPG::appendEIT( TS::TSPacket *ts)
+{
+ Section::STATUS status;
+ uint16_t pid = ts->getPID();
+ uint32_t index = 0;
+
+ do {
+ status = eits[ pid]->append( ts, &index);
+ if( status == Section::SUCCESS || status == Section::INCLUDE_NEW_SECTION) {
+ appendEvnet((EIT*)eits[ pid]);
+ if( status == Section::SUCCESS) {
+ return true;
+ }
+ }
+ else if( status == Section::CONTINUE) {
+ return true;
+ }
+ else if( status == Section::ERROR_START_SECTION) {
+ return true;
+ }
+ else if( status == Section::ERROR_TS_COUNTER) {
+ eits[ pid]->clear();
+ index = 0;
+ fprintf( stderr, "TS COUNTER ERROR: ch = %s\n", channel.c_str());
+ continue;
+ }
+ else {
+ fprintf( stderr, "parse err: %d, ch = %s\n", status, channel.c_str());
+ eits[ pid]->clear();
+ return false;
+ //return true;
+ }
+ } while( status == Section::INCLUDE_NEW_SECTION);
+
+ return true;
+}
+
+void EPG::appendEvnet( EIT *p)
+{
+ ShortEvent *se;
+ Content *c;
+ ExtendedEvent *ee;
+ SERVICE s;
+
+ s.transport_stream_id = p->transport_stream_id;
+ s.original_network_id = p->original_network_id;
+ s.service_id = p->si_id.service_id;
+
+ EIT::EVENTS::iterator it;
+ EIT::DESCRIPTORS::iterator d;
+
+ for( it = p->events.begin(); it != p->events.end(); it++) {
+#if 0
+ for( d = it->descriptors.begin(); d != it->descriptors.end(); d++) {
+ if( (*d)->descriptor_tag == ShortEvent::TAG) {
+ break;
+ }
+ }
+ if( d == it->descriptors.end()) {
+ continue;
+ }
+#endif
+
+ EXTEND::ITEM item, item_tmp;
+ std::string ext_text;
+
+ EVENT *e = &epg_data[ s][ it->event_id];
+ bool ext_flag = e->extend_flag;
+
+ e->event_id = it->event_id;
+ e->start_time = it->start_time;
+ if( it->duration == 0) {
+ // とりあえず5分後
+ e->end_time = it->start_time + 5 * 60;
+ }
+ else {
+ e->end_time = it->start_time + it->duration;
+ }
+
+ for( d = it->descriptors.begin() ; d != it->descriptors.end(); d++) {
+ if( (*d)->descriptor_tag == ShortEvent::TAG) {
+ se = (ShortEvent*)*d;
+ AribToString( &e->title, &se->event_name_char);
+ AribToString( &e->desc , &se->text_char);
+ }
+ else if( (*d)->descriptor_tag == Content::TAG) {
+ c = (Content*)*d;
+ Content::CONTENTS::iterator c_it;
+ for( c_it = c->contents.begin(); c_it != c->contents.end(); c_it++) {
+ e->categorys.push_back( c_it->content_nibble_level_1);
+ }
+ }
+ else if( (*d)->descriptor_tag == ExtendedEvent::TAG) {
+ ExtendedEvent::ITEMS::iterator i_it;
+ ee = (ExtendedEvent*)*d;
+
+ if( e->extend_flag) {
+ e->extend.clear();
+ e->extend_flag = false;
+ }
+
+ for( i_it = ee->items.begin(); i_it != ee->items.end(); i_it++) {
+ if( !i_it->item_description_char.empty()) {
+
+ if( !item.description.empty()) {
+ ext_flag = true;
+ AribToString( &item_tmp.description, &item.description);
+ AribToString( &item_tmp.item , &item.item);
+ e->extend.items.push_back( item_tmp);
+ item.clear();
+ }
+
+ item.description = i_it->item_description_char;
+ item.item = i_it->item_char;
+ }
+ else {
+ if( !i_it->item_char.empty()) {
+ item.item += i_it->item_char;
+ }
+ }
+ }
+ // とりあえず格納
+ ext_text += ee->text_char;
+ }
+ }
+
+ if( !item.description.empty()) {
+ ext_flag = true;
+ AribToString( &item_tmp.description, &item.description);
+ AribToString( &item_tmp.item , &item.item);
+ e->extend.items.push_back( item_tmp);
+ item.clear();
+ }
+ if( !ext_text.empty()) {
+ ext_flag = true;
+ AribToString( &e->extend.text, &ext_text);
+ }
+ e->extend_flag = ext_flag;
+
+ e->table_id = p->table_id;
+
+#if 0
+ if( !e.title.empty()) {
+ epg_data[ s].insert( e);
+ }
+#endif
+ }
+}
+
+const std::string EPG::createChannelID( const SERVICE *s)
+{
+ std::ostringstream id;
+
+ if( channel.compare( "BS") == 0) {
+ id << "BS" << s->service_id;
+ }
+ else if( channel.compare( "CS") == 0) {
+ id << "CS" << s->service_id;
+ }
+ else {
+ id << channel;
+ }
+
+ return id.str();
+}
+
+bool EPG::write( const char *xml_file)
+{
+ char start_time[ 64];
+ char end_time[ 64];
+ int fd;
+ int i;
+ int category;
+
+ std::string str;
+ std::ostringstream buf;
+
+ EVENTS *p;
+ EVENT *e;
+ SERVICES::iterator s;
+ EVENTS::iterator e_it;
+
+ if( strcmp( xml_file, "-") == 0) {
+ fd = 1;
+ }
+ else {
+ fd = open( xml_file, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if( fd == -1) {
+ fprintf( stderr, "%s is not opened.\n", xml_file);
+ return false;
+ }
+ }
+
+#if 0
+ for( s = services.begin(); s != services.end(); s++) {
+ fprintf( stderr, "on = %d, ts = %d, sid = %d, %s\n",
+ s->first.original_network_id, s->first.transport_stream_id,
+ s->first.service_id, s->second.c_str()
+ );
+ }
+#endif
+
+#if 1
+ if( channel.compare( "BS") != 0 && channel.compare( "CS") != 0 && services.size() > 1) {
+ SERVICES::iterator index = services.begin();
+ std::advance( index, 1);
+ services.erase( index, services.end());
+ }
+#endif
+
+ if( !writeHeader( fd)) {
+ goto ERR;
+ }
+ if( !writeChannel( fd)) {
+ goto ERR;
+ }
+
+ for( s = services.begin(); s != services.end(); s++) {
+ p = &epg_data[ s->first];
+ for( e_it = p->begin(); e_it != p->end(); e_it++) {
+ e = &e_it->second;
+ if( e->title.empty()) {
+ continue;
+ }
+
+ strftime( start_time, sizeof( start_time), "%Y%m%d%H%M%S", localtime( &e->start_time));
+ strftime( end_time, sizeof( end_time), "%Y%m%d%H%M%S", localtime( &e->end_time));
+
+ if( e->categorys.size() == 0) {
+ category = CONTENT_NUM - 1;
+ }
+ else {
+ category = e->categorys[ 0];
+ }
+
+ buf.str( "");
+ buf << "\t<programme "
+ << "start=\"" << start_time << " +0900\" "
+ << "stop=\"" << end_time << " +0900\" "
+ << "channel=\"" << createChannelID( &s->first) << "\" "
+#if 0
+ << "sid=\"" << s->first.service_id << "\" "
+ << "eid=\"" << e->event_id << "\" "
+#endif
+ << ">\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ goto ERR;
+ }
+
+ str = e->title;
+ convertCharactor( &str);
+ buf.str( "");
+ buf << "\t\t<title lang=\"ja_JP\">" << str << "</title>\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ goto ERR;
+ }
+
+ str = e->desc;
+ convertCharactor( &str);
+ buf.str( "");
+ buf << "\t\t<desc lang=\"ja_JP\">" << str << "</desc>\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ goto ERR;
+ }
+
+ buf.str( "");
+ buf << "\t\t<category lang=\"ja_JP\">" << contents[ category].jpn << "</category>\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ goto ERR;
+ }
+
+ buf.str( "");
+ buf << "\t\t<category lang=\"en\">" << contents[ category].eng << "</category>\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ goto ERR;
+ }
+
+ if( e->extend_flag) {
+ EXTEND::ITEMS::const_iterator item;
+
+ buf.str( "");
+ buf << "\t\t<desc lang=\"ja_JP\">";
+ for( item = e->extend.items.begin(); item != e->extend.items.end(); item++) {
+ str = item->description;
+ convertCharactor( &str);
+ buf << str << "\n";
+
+ str = item->item;
+ convertCharactor( &str);
+ buf << str << "\n";
+ }
+ if( !e->extend.text.empty()) {
+ str = item->item;
+ convertCharactor( &str);
+ buf << str << "\n";
+ }
+
+ buf << "</desc>\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ goto ERR;
+ }
+ }
+
+ buf.str( "");
+ buf << "\t</programme>\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ goto ERR;
+ }
+ }
+ }
+ if( !writeFooter( fd)) {
+ goto ERR;
+ }
+
+ if( fd != 1) {
+ close( fd);
+ }
+ return true;
+
+ERR:
+ if( fd != 1) {
+ close( fd);
+ }
+ return false;
+}
+
+bool EPG::writeHeader( int fd)
+{
+ const char *header;
+ header = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n" \
+ "<!DOCTYPE tv SYSTEM \"xmltv.dtd\">\n\n" \
+ "<tv generator-info-name=\"eit2xml\" generator-info-url=\"http://localhost/\">\n";
+
+ if( ::write( fd, header, strlen( header)) != strlen( header)) {
+ return false;
+ }
+
+ return true;
+}
+
+bool EPG::writeChannel( int fd)
+{
+ std::ostringstream buf;
+ std::string ch_id;
+ std::string str;
+
+ SERVICES::iterator s;
+ for( s = services.begin(); s != services.end(); s++) {
+ ch_id = createChannelID( &s->first);
+ buf.str( "");
+ buf << " \t<channel id=\"" << ch_id << "\">\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ return false;
+ }
+
+ str = s->second;
+ convertCharactor( &str);
+ buf.str( "");
+ buf << "\t\t<display-name lang=\"ja_JP\">" << str << "</display-name>\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ return false;
+ }
+#if 0
+ buf.str( "");
+ buf << "\t\t<sid>" << s->first.service_id << "</sid>";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ return false;
+ }
+#endif
+ buf.str( "");
+ buf << "\t</channel>\n";
+ if( ::write( fd, buf.str().c_str(), buf.str().length()) != buf.str().length()) {
+ return false;
+ }
+ }
+ return true;
+}
+
+bool EPG::writeFooter( int fd)
+{
+ const char *footer = "</tv>\n";
+ if( ::write( fd, footer, strlen( footer)) != strlen( footer)) {
+ return false;
+ }
+ return true;
+}
+
+void EPG::convertCharactor(std::string *str)
+{
+ const char *rep[][2] = {
+ { "&" , "&" , },
+ { "'" , "'", },
+ { "\"", """, },
+ { "<" , "<" , },
+ { ">" , ">" , },
+ { NULL, NULL , },
+ };
+
+ const char *from, *to;
+ int i;
+
+ std::string::size_type pos;
+
+ for( i = 0, from = rep[ i][ 0], to = rep[ i][ 1]; from && to; i++, from = rep[ i][ 0], to = rep[ i][ 1]) {
+ pos = 0;
+ while( (pos = str->find( from, pos)) != std::string::npos) {
+ str->replace( pos, strlen( from), to);
+ pos += strlen( to);
+ }
+ }
+}
+
+
--- /dev/null
+#pragma once
+
+#include <inttypes.h>
+#include <string>
+#include <vector>
+#include <map>
+#include <set>
+#include "TS/ts_packet.h"
+#include "TS/psi.h"
+#include "ARIB/si.h"
+
+using namespace TS;
+using namespace TS::PSI;
+using namespace TS::PSI::ARIB;
+using namespace TS::Description::ARIB;
+
+class EPG
+{
+private:
+ struct CONTENT {
+ const char *jpn;
+ const char *eng;
+ };
+
+ struct SERVICE {
+ uint16_t transport_stream_id;
+ uint16_t original_network_id;
+ uint16_t service_id;
+
+ struct Less : public std::binary_function< SERVICE, SERVICE, bool> {
+ bool operator()( const SERVICE &a, const SERVICE &b) const {
+ if( a.original_network_id < b.original_network_id) {
+ return true;
+ }
+ else if( a.transport_stream_id < a.transport_stream_id) {
+ return true;
+ }
+ else if( a.service_id < b.service_id) {
+ return true;
+ }
+ else {
+ return false;
+ }
+ }
+ };
+ };
+
+ struct EXTEND {
+ struct ITEM {
+ std::string description;
+ std::string item;
+
+ void clear() {
+ description.clear();
+ item.clear();
+ }
+ };
+
+ typedef std::list< ITEM> ITEMS;
+
+ ITEMS items;
+ std::string text;
+
+ void clear() {
+ items.clear();
+ text.clear();
+ }
+ };
+
+ struct EVENT {
+ typedef std::vector< uint8_t> CATEGORYS;
+
+ uint16_t event_id;
+ time_t start_time;
+ time_t end_time;
+ std::string title;
+ std::string desc;
+ CATEGORYS categorys;
+
+ uint8_t table_id;
+
+ bool extend_flag;
+ EXTEND extend;
+
+ EVENT() {
+ extend_flag = false;
+ }
+#if 0
+ struct Less : public std::binary_function< EVENT, EVENT, bool> {
+ bool operator()( const EVENT &a, const EVENT &b) const {
+ return (a.start_time < b.start_time);
+ }
+ };
+#endif
+ };
+
+ typedef std::map< uint8_t , EIT*> EITS;
+
+ typedef std::map< SERVICE, std::string, SERVICE::Less> SERVICES;
+// typedef std::set< EVENT, EVENT::Less> EVENTS;
+ typedef std::map< uint16_t, EVENT> EVENTS;
+ typedef std::map< SERVICE, EVENTS, SERVICE::Less> EPG_DATA;
+
+ static const int32_t EIT_PID_NUM = 3;
+ static const uint16_t SDT_PID = 0x0011;
+ static const uint16_t EIT_PID[ EIT_PID_NUM];
+ static const int32_t CONTENT_NUM = 16;
+
+ static const CONTENT contents[ CONTENT_NUM];
+
+ AribDescriptorParser descriptor_parser;
+ SDT *sdt;
+ EITS eits;
+
+ SERVICES services;
+// EVENTS events;
+ EPG_DATA epg_data;
+
+ const std::string channel;
+
+public:
+ EPG( std::string ch);
+ ~EPG();
+
+ bool append( TSPacket *ts);
+ bool write( const char *xml_file);
+
+private:
+ bool appendSDT( TSPacket *ts);
+ bool appendEIT( TSPacket *ts);
+
+ void appendEvnet( EIT *p);
+
+ const std::string createChannelID( const SERVICE *s);
+
+ void convertCharactor( std::string *str);
+
+ bool writeHeader( int fd);
+ bool writeChannel( int fd);
+ bool writeFooter( int fd);
+};
+
--- /dev/null
+
+#include <inttypes.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+#include <map>
+#include <set>
+#include "TS/ts_packet.h"
+#include "TS/psi.h"
+#include "ARIB/si.h"
+#include "aribstr.h"
+
+using namespace TS;
+using namespace TS::PSI;
+using namespace TS::PSI::ARIB;
+using namespace TS::Description;
+using namespace TS::Description::ARIB;
+
+typedef std::map< uint16_t, Section*> SECTIONS;
+
+
+void printPAT( Section *sec)
+{
+ PAT *pat = (PAT *)sec;
+
+ fprintf( stdout, "\n[ PAT ]\n");
+ fprintf( stdout, "table id = %5u\n", pat->table_id);
+ fprintf( stdout, "section syntax indicator = %5u\n", pat->section_syntax_indicator);
+ fprintf( stdout, "section length = %5u\n", pat->section_length);
+ fprintf( stdout, "transport stream id = %5u\n", pat->psi_id.transport_stream_id);
+ fprintf( stdout, "version number = %5u\n", pat->version_number);
+ fprintf( stdout, "current next indicator = %5u\n", pat->current_next_indicator);
+ fprintf( stdout, "section number = %5u\n", pat->section_number);
+ fprintf( stdout, "last section number = %5u\n", pat->last_section_number);
+ fprintf( stdout, "network PID = %5u\n", pat->network_PID);
+
+ PAT::PROGRAM_MAP::iterator it;
+ for( it = pat->program_map_PID.begin(); it != pat->program_map_PID.end(); it++) {
+ fprintf( stdout, " program number = 0x%04X, program map PID = 0x%04X\n", it->first, it->second);
+ }
+}
+
+void printCAT( Section *sec)
+{
+ CAT *cat = (CAT *)sec;
+
+ fprintf( stdout, "\n[ CAT ]\n");
+ fprintf( stdout, "table id = %5u\n", cat->table_id);
+ fprintf( stdout, "section syntax indicator = %5u\n", cat->section_syntax_indicator);
+ fprintf( stdout, "section length = %5u\n", cat->section_length);
+ fprintf( stdout, "version number = %5u\n", cat->version_number);
+ fprintf( stdout, "current next indicator = %5u\n", cat->current_next_indicator);
+ fprintf( stdout, "section number = %5u\n", cat->section_number);
+ fprintf( stdout, "last section number = %5u\n", cat->last_section_number);
+
+ CAT::DESCRIPTORS::iterator d;
+ for( d = cat->descriptors.begin(); d != cat->descriptors.end(); d++) {
+ fprintf( stdout, " descriptor_tag = 0x%02X\n", (*d)->descriptor_tag);
+ fprintf( stdout, " descriptor_length = %5u\n", (*d)->descriptor_length);
+ }
+}
+
+void printTSDT( Section *sec)
+{
+ TSDT *tsdt = (TSDT *)sec;
+
+ fprintf( stdout, "\n[ TSDT ]\n");
+ fprintf( stdout, "table id = %5u\n", tsdt->table_id);
+ fprintf( stdout, "section syntax indicator = %5u\n", tsdt->section_syntax_indicator);
+ fprintf( stdout, "section length = %5u\n", tsdt->section_length);
+ fprintf( stdout, "version number = %5u\n", tsdt->version_number);
+ fprintf( stdout, "current next indicator = %5u\n", tsdt->current_next_indicator);
+ fprintf( stdout, "section number = %5u\n", tsdt->section_number);
+ fprintf( stdout, "last section number = %5u\n", tsdt->last_section_number);
+
+ TSDT::DESCRIPTORS::iterator d;
+ for( d = tsdt->descriptors.begin(); d != tsdt->descriptors.end(); d++) {
+ fprintf( stdout, " descriptor_tag = 0x%02X\n", (*d)->descriptor_tag);
+ fprintf( stdout, " descriptor_length = %5u\n", (*d)->descriptor_length);
+ }
+}
+
+void printPMT( Section *sec)
+{
+ PMT *pmt = (PMT *)sec;
+ PMT::DESCRIPTORS::iterator d;
+
+ fprintf( stdout, "\n[ PMT ]\n");
+ fprintf( stdout, "table id = %5u\n", pmt->table_id);
+ fprintf( stdout, "section syntax indicator = %5u\n", pmt->section_syntax_indicator);
+ fprintf( stdout, "section length = %5u\n", pmt->section_length);
+ fprintf( stdout, "program number = %5u\n", pmt->psi_id.program_number);
+ fprintf( stdout, "version number = %5u\n", pmt->version_number);
+ fprintf( stdout, "current next indicator = %5u\n", pmt->current_next_indicator);
+ fprintf( stdout, "section number = %5u\n", pmt->section_number);
+ fprintf( stdout, "last section number = %5u\n", pmt->last_section_number);
+ fprintf( stdout, "PCR_PID = 0x%04X\n", pmt->PCR_PID);
+ fprintf( stdout, "program_info_length = %5u\n", pmt->program_info_length);
+
+ for( d = pmt->program_info_descriptors.begin(); d != pmt->program_info_descriptors.end(); d++) {
+ fprintf( stdout, "descriptor_tag = 0x%02X\n", (*d)->descriptor_tag);
+ fprintf( stdout, "descriptor_length = %5u\n", (*d)->descriptor_length);
+
+ if( (*d)->descriptor_tag == ConditionalAccess::TAG) {
+ ConditionalAccess *ca = (ConditionalAccess *)*d;
+ fprintf( stdout, "CA_system_ID = %5u\n", ca->CA_system_ID);
+ fprintf( stdout, "CA_PID = 0x%04X\n", ca->CA_PID);
+ }
+ }
+
+ PMT::ELEMENTS::iterator e;
+ for( e = pmt->elements.begin(); e != pmt->elements.end(); e++) {
+ fprintf( stdout, " stream_type = 0x%02X\n", e->stream_type);
+ fprintf( stdout, " elementary_PID = 0x%04X\n", e->elementary_PID);
+ fprintf( stdout, " ES_info_length = %5u\n", e->ES_info_length);
+
+ PMT::DESCRIPTORS::iterator d;
+ for( d = e->descriptors.begin(); d != e->descriptors.end(); d++) {
+ fprintf( stdout, " descriptor_tag = 0x%02X\n", (*d)->descriptor_tag);
+ fprintf( stdout, " descriptor_length = %5u\n", (*d)->descriptor_length);
+
+ if( (*d)->descriptor_tag == ConditionalAccess::TAG) {
+ ConditionalAccess *ca = (ConditionalAccess *)*d;
+ fprintf( stdout, " CA_system_ID = %5u\n", ca->CA_system_ID);
+ fprintf( stdout, " CA_PID = 0x%04X\n", ca->CA_PID);
+ }
+ }
+ }
+}
+
+
+void printEIT( Section *sec)
+{
+ EIT *eit = (EIT *)sec;
+
+ fprintf( stdout, "\n[ EIT ]\n");
+ fprintf( stdout, "table id = 0x%02X\n", eit->table_id);
+ fprintf( stdout, "section syntax indicator = %5u\n", eit->section_syntax_indicator);
+ fprintf( stdout, "private indicator = %5u\n", eit->private_indicator);
+ fprintf( stdout, "section length = %5u\n", eit->section_length);
+ fprintf( stdout, "service_id = %5u\n", eit->si_id.service_id);
+ fprintf( stdout, "version number = %5u\n", eit->version_number);
+ fprintf( stdout, "current next indicator = %5u\n", eit->current_next_indicator);
+ fprintf( stdout, "section number = %5u\n", eit->section_number);
+ fprintf( stdout, "last section number = %5u\n", eit->last_section_number);
+ fprintf( stdout, "transport_stream_id = %5u\n", eit->transport_stream_id);
+ fprintf( stdout, "original_network_id = %5u\n", eit->original_network_id);
+ fprintf( stdout, "segment_last_section_number = %5u\n", eit->segment_last_section_number);
+ fprintf( stdout, "last_table_id = %5u\n", eit->last_table_id);
+
+ EIT::EVENTS::iterator e;
+ for( e = eit->events.begin(); e != eit->events.end(); e++) {
+ fprintf( stdout, " event_id = %5u\n", e->event_id);
+ fprintf( stdout, " start_time = %s", asctime( localtime( &e->start_time)));
+ fprintf( stdout, " duration = %5d\n", e->duration);
+ fprintf( stdout, " running_status = %5u\n", e->running_status);
+ fprintf( stdout, " free_CA_mode = %5u\n", e->free_CA_mode);
+ fprintf( stdout, " descriptors_loop_length = %5u\n", e->descriptors_loop_length);
+
+ EIT::DESCRIPTORS::iterator d;
+ for( d = e->descriptors.begin(); d != e->descriptors.end(); d++) {
+ fprintf( stdout, " descriptor_tag = 0x%02X\n", (*d)->descriptor_tag);
+ fprintf( stdout, " descriptor_length = %5u\n", (*d)->descriptor_length);
+#if 1
+ if( (*d)->descriptor_tag == ShortEvent::TAG) {
+ ShortEvent *des = (ShortEvent*)*d;
+ std::string str;
+ AribToString( &str, &des->event_name_char);
+ fprintf( stdout, " event_name = %s\n", str.c_str());
+ AribToString( &str, &des->text_char);
+ fprintf( stdout, " text = %s\n", str.c_str());
+
+ }
+ if( (*d)->descriptor_tag == ExtendedEvent::TAG) {
+ ExtendedEvent *des = (ExtendedEvent *)*d;
+ fprintf( stdout, " descriptor_number = %d\n", des->descriptor_number);
+ fprintf( stdout, " last_descriptor_number = %d\n", des->last_descriptor_number);
+ fprintf( stdout, " length_of_items = %d\n", des->length_of_items);
+
+ ExtendedEvent::ITEMS::iterator it;
+ std::string str;
+ for( it = des->items.begin(); it != des->items.end(); it++) {
+ AribToString( &str, &it->item_description_char);
+ fprintf( stdout, " item_description = %s\n", str.c_str());
+ AribToString( &str, &it->item_char);
+ fprintf( stdout, " item = %s\n", str.c_str());
+ }
+ AribToString( &str, &des->text_char);
+ fprintf( stdout, " text_char = %s\n", str.c_str());
+ }
+ if( (*d)->descriptor_tag == Component::TAG) {
+ Component *des = (Component *)*d;
+ std::string str;
+ fprintf( stdout, " stream_content = 0x%02X\n", des->stream_content);
+ fprintf( stdout, " component_type = 0x%02X\n", des->component_type);
+ fprintf( stdout, " component_tag = 0x%02X\n", des->component_tag);
+ AribToString( &str, &des->text_char);
+ fprintf( stdout, " text = %s\n", str.c_str());
+ }
+ if( (*d)->descriptor_tag == Content::TAG) {
+ Content *des = (Content *)*d;
+ Content::CONTENTS::iterator it;
+ for( it = des->contents.begin(); it != des->contents.end(); it++) {
+ fprintf( stdout, " content_nibble_level_1 = %d\n", it->content_nibble_level_1);
+ fprintf( stdout, " content_nibble_level_2 = %d\n", it->content_nibble_level_2);
+ fprintf( stdout, " user_nibble_1 = %d\n", it->user_nibble_1);
+ fprintf( stdout, " user_nibble_2 = %d\n", it->user_nibble_2);
+ }
+ }
+ if( (*d)->descriptor_tag == AudioComponent::TAG) {
+ AudioComponent *des = (AudioComponent *)*d;
+ std::string str;
+ fprintf( stdout, " stream_content = 0x%02X\n", des->stream_content);
+ fprintf( stdout, " component_type = 0x%02X\n", des->component_type);
+ fprintf( stdout, " component_tag = 0x%02X\n", des->component_tag);
+ fprintf( stdout, " stream_type = 0x%02X\n", des->stream_type);
+ fprintf( stdout, " simulcast_group_tag = 0x%02X\n", des->simulcast_group_tag);
+ fprintf( stdout, " ES_multi_lingual_flag = %2d\n", des->ES_multi_lingual_flag);
+ fprintf( stdout, " main_component_flag = %2d\n", des->main_component_flag);
+ fprintf( stdout, " quality_indicator = 0x%02X\n", des->quality_indicator);
+ fprintf( stdout, " sampling_rate = 0x%02X\n", des->sampling_rate);
+ fprintf( stdout, " component_tag = 0x%02X\n", des->component_tag);
+ fprintf( stdout, " ISO_639_language_code = %s\n", des->ISO_639_language_code.c_str());
+ if( des->ES_multi_lingual_flag) {
+ fprintf( stdout, " ISO_639_language_code_2 = %s\n", des->ISO_639_language_code_2.c_str());
+ }
+ AribToString( &str, &des->text_char);
+ fprintf( stdout, " text = %s\n", str.c_str());
+ }
+ if( (*d)->descriptor_tag == EventGroup::TAG) {
+ EventGroup *des = (EventGroup *)*d;
+ EventGroup::EVENTS::iterator e;
+ EventGroup::NETWORK_EVENTS::iterator n;
+ fprintf( stdout, " group_type = %X\n", des->group_type);
+ fprintf( stdout, " event_count = %d\n", des->event_count);
+ for( e = des->events.begin(); e != des->events.end(); e++) {
+ fprintf( stdout, " service_id = %d\n", e->service_id);
+ fprintf( stdout, " event_id = %d\n", e->event_id);
+ }
+ if( des->group_type == 4 || des->group_type == 5) {
+ for( n = des->network_events.begin(); n != des->network_events.end(); n++) {
+ fprintf( stdout, " original_network_id = %d\n", n->original_network_id);
+ fprintf( stdout, " transport_stream_id = %d\n", n->transport_stream_id);
+ fprintf( stdout, " service_id = %d\n", n->event.service_id);
+ fprintf( stdout, " event_id = %d\n", n->event.event_id);
+ }
+ }
+ else {
+ fprintf( stdout, " private_data_length = %d\n", des->getPrivateData()->size());
+ }
+ }
+#endif
+ }
+ }
+}
+
+void printNIT( Section *sec)
+{
+ NIT *nit = (NIT *)sec;
+
+ fprintf( stdout, "\n[ NIT ]\n");
+ fprintf( stdout, "table id = 0x%02X\n", nit->table_id);
+ fprintf( stdout, "section syntax indicator = %5u\n", nit->section_syntax_indicator);
+ fprintf( stdout, "private indicator = %5u\n", nit->private_indicator);
+ fprintf( stdout, "section length = %5u\n", nit->section_length);
+ fprintf( stdout, "network_id = %5u\n", nit->si_id.network_id);
+ fprintf( stdout, "version number = %5u\n", nit->version_number);
+ fprintf( stdout, "current next indicator = %5u\n", nit->current_next_indicator);
+ fprintf( stdout, "section number = %5u\n", nit->section_number);
+ fprintf( stdout, "last section number = %5u\n", nit->last_section_number);
+ fprintf( stdout, "network_descriptors_length = %5u\n", nit->network_descriptors_length);
+
+ NIT::DESCRIPTORS::iterator d;
+ for( d = nit->networks.begin(); d != nit->networks.end(); d++) {
+ fprintf( stdout, " descriptor_tag = 0x%02X\n", (*d)->descriptor_tag);
+ fprintf( stdout, " descriptor_length = %5u\n", (*d)->descriptor_length);
+ if( (*d)->descriptor_tag == NetworkName::TAG) {
+ NetworkName *des = (NetworkName *)*d;
+ std::string str;
+ AribToString( &str, &des->name);
+ fprintf( stdout, " name = %s\n", str.c_str());
+ }
+ }
+
+ fprintf( stdout, "transport_stream_loop_length = %5u\n", nit->transport_stream_loop_length);
+ NIT::STREAMS::iterator s;
+ for( s = nit->streams.begin(); s != nit->streams.end(); s++) {
+ fprintf( stdout, " transport_stream_id = %5u\n", s->transport_stream_id);
+ fprintf( stdout, " original_network_id = %5u\n", s->original_network_id);
+ fprintf( stdout, " transport_descriptors_length = %5u\n", s->transport_descriptors_length);
+ for( d = s->descriptors.begin(); d != s->descriptors.end(); d++) {
+ fprintf( stdout, " descriptor_tag = 0x%02X\n", (*d)->descriptor_tag);
+ fprintf( stdout, " descriptor_length = %5u\n", (*d)->descriptor_length);
+ if( (*d)->descriptor_tag == ServiceList::TAG) {
+ ServiceList *des = (ServiceList *)*d;
+ ServiceList::SERVICES::iterator it;
+ for( it = des->services.begin(); it != des->services.end(); it++) {
+ fprintf( stdout, " service_id = %5u\n", it->service_id);
+ fprintf( stdout, " service_type = %5u\n", it->service_type);
+ }
+ }
+ }
+ }
+}
+
+void printSDT( Section *sec)
+{
+ SDT *sdt = (SDT *)sec;
+ std::string str;
+
+ fprintf( stdout, "\n[ SDT ]\n");
+ fprintf( stdout, "table id = 0x%02X\n", sdt->table_id);
+ fprintf( stdout, "section syntax indicator = %5u\n", sdt->section_syntax_indicator);
+ fprintf( stdout, "private indicator = %5u\n", sdt->private_indicator);
+ fprintf( stdout, "section length = %5u\n", sdt->section_length);
+ fprintf( stdout, "transport_stream_id = %5u\n", sdt->si_id.transport_stream_id);
+ fprintf( stdout, "version number = %5u\n", sdt->version_number);
+ fprintf( stdout, "current next indicator = %5u\n", sdt->current_next_indicator);
+ fprintf( stdout, "section number = %5u\n", sdt->section_number);
+ fprintf( stdout, "last section number = %5u\n", sdt->last_section_number);
+ fprintf( stdout, "original_network_id = %5u\n", sdt->original_network_id);
+
+ SDT::SERVICES::iterator s;
+ for( s = sdt->services.begin(); s != sdt->services.end(); s++) {
+ fprintf( stdout, " service_id = %5u\n", s->service_id);
+ fprintf( stdout, " EIT_user_defined_flags = %d\n", s->EIT_user_defined_flags);
+ fprintf( stdout, " EIT_schedule_flag = %d\n", s->EIT_schedule_flag);
+ fprintf( stdout, " EIT_present_following_flag = %d\n", s->EIT_present_following_flag);
+ fprintf( stdout, " running_status = %5u\n", s->running_status);
+ fprintf( stdout, " free_CA_mode = %5u\n", s->free_CA_mode);
+ fprintf( stdout, " descriptors_loop_length = %5u\n", s->descriptors_loop_length);
+
+ SDT::DESCRIPTORS::iterator d;
+ for( d = s->descriptors.begin(); d != s->descriptors.end(); d++) {
+ fprintf( stdout, " descriptor_tag = 0x%02X\n", (*d)->descriptor_tag);
+ fprintf( stdout, " descriptor_length = %5u\n", (*d)->descriptor_length);
+ if( (*d)->descriptor_tag == Service::TAG) {
+ Service *p = (Service *)*d;
+ fprintf( stdout, " service_type = %d\n", p->service_type);
+#if 1
+ AribToString( &str, &p->service_provider_name);
+ fprintf( stdout, " service_provider_name = %s\n", str.c_str());
+ AribToString( &str, &p->service_name);
+ fprintf( stdout, " service_name = %s\n", str.c_str());
+#endif
+ }
+ }
+ }
+}
+
+
+int main( int argc, char **argv)
+{
+ int fd;
+ char *filename;
+
+ const uint32_t buf_size = TS::TSPacket::TS_PACKET_SIZE * 10;
+
+ uint16_t pid;
+ uint8_t buf[ buf_size];
+ uint32_t index = 0;
+ uint32_t read_len;
+ uint32_t offset = 0;
+ ssize_t file_read_size;
+ bool output_ts = false;
+
+ TSPacket *ts = NULL;
+ Section::STATUS status;
+ SECTIONS secs;
+ SECTIONS::iterator sec_it;
+
+ AribDescriptorParser des_parser;
+
+ uint32_t payload_index = 0;
+
+ if( argc <2) {
+ fprintf( stderr, "required TS file\n");
+ return 1;
+ }
+
+ filename = argv[ 1];
+#if 0
+ if( argc >= 3) {
+ output_ts = true;
+ }
+#endif
+
+ if( strcmp( filename, "-") == 0) {
+ fd = 0;
+ }
+ else {
+ fd = open( filename, O_RDONLY);
+ }
+ if( fd == -1) {
+ fprintf( stderr, "%s is not opened.\n", filename);
+ return 1;
+ }
+
+ secs[ 0x0000] = new PAT( &des_parser);
+ secs[ 0x0001] = new CAT( &des_parser);
+ secs[ 0x0002] = new TSDT( &des_parser);
+ secs[ 0x0010] = new NIT( &des_parser);
+ secs[ 0x0011] = new SDT( &des_parser);
+ secs[ 0x0012] = new EIT( &des_parser);
+ secs[ 0x0026] = new EIT( &des_parser);
+ secs[ 0x0027] = new EIT( &des_parser);
+
+ int32_t t_err_pid;
+
+ int ofd = -1;
+ uint8_t write_buf[ 1024];
+ bool save_flag = false;
+ uint16_t pmt_pid = 0;
+ uint8_t pat_counter = 0;
+ uint8_t pmt_counter = 0;
+ std::set< uint16_t> save_pid;
+
+ save_pid.insert( 0x0000);
+ save_pid.insert( 0x0001);
+ save_pid.insert( 0x0010);
+ save_pid.insert( 0x0011);
+
+ while( (file_read_size = read( fd, buf + offset, buf_size - offset) + offset) > 0 ) {
+ index = 0;
+ while( index + TS::TSPacket::TS_PACKET_SIZE <= file_read_size) {
+ if( ts) {
+ delete ts;
+ }
+
+ ts = TS::TSPacket::parse( &buf[ index], file_read_size, &read_len);
+ if( !ts) {
+ fprintf( stderr, "TS Packet parse error\n");
+ index += TS::TSPacket::TS_PACKET_SIZE;
+ continue;
+ }
+// index += read_len;
+ pid = ts->getPID();
+ sec_it = secs.find( pid);
+ if( sec_it != secs.end()) {
+ payload_index = 0;
+ do {
+ status = sec_it->second->append( ts, &payload_index);
+ if( status == Section::SUCCESS || status == Section::INCLUDE_NEW_SECTION) {
+ if( sec_it->first == 0x0000) {
+ //printPAT( sec_it->second);
+
+ PAT *pat = (PAT *)sec_it->second;
+ PAT::PROGRAM_MAP::iterator it;
+ SECTIONS::iterator pmt;
+#if 0
+ for( it = pat->program_map_PID.begin(); it != pat->program_map_PID.end(); it++) {
+ pmt = secs.find( it->second);
+ if( pmt == secs.end()) {
+ secs[ it->second] = new PMT( &des_parser);
+ save_pid.insert( it->second);
+ fprintf( stderr, "new pid 0x%04X, program number %u\n", it->second, it->first);
+ if( pmt_pid == 0) {
+ pmt_pid = it->second;
+ }
+ }
+ }
+#else
+ save_pid.insert( pat->network_PID);
+ it = pat->program_map_PID.begin();
+ std::advance( it, 1);
+ pat->program_map_PID.erase( it, pat->program_map_PID.end());
+ it = pat->program_map_PID.begin();
+ if( secs.find( it->second) == secs.end()) {
+ secs[ it->second] = new PMT( &des_parser);
+ save_pid.insert( it->second);
+ fprintf( stderr, "new pid 0x%04X, program number %u\n", it->second, it->first);
+ pmt_pid = it->second;
+ }
+#endif
+ }
+ else if( sec_it->first == 0x0001) {
+ //printCAT( sec_it->second);
+ }
+ else if( sec_it->first == 0x0002) {
+ //printTSDT( sec_it->second);
+ }
+ else if( sec_it->first == 0x0010) {
+ //printNIT( sec_it->second);
+ }
+ else if( sec_it->first == 0x0011) {
+ ///printSDT( sec_it->second);
+ }
+ else if( (sec_it->first == 0x0012 || sec_it->first == 0x0026 || sec_it->first == 0x0027)) {
+ printEIT( sec_it->second);
+ }
+ else {
+ if( sec_it->second->table_id == PMT::ID) {
+ //printPMT( sec_it->second);
+
+ PMT *pmt = (PMT *)sec_it->second;
+ PMT::DESCRIPTORS::iterator d;
+ PMT::ELEMENTS::iterator e;
+
+ //if( pmt_pid == sec_it->first) {
+ if( save_pid.find( pmt->PCR_PID) == save_pid.end()) {
+ save_pid.insert( pmt->PCR_PID);
+ fprintf( stderr, "new pid 0x%04X, PCR, cur pid 0x%04X\n", pmt->PCR_PID, sec_it->first);
+ }
+
+ for( d = pmt->program_info_descriptors.begin(); d != pmt->program_info_descriptors.end(); d++) {
+ if( (*d)->descriptor_tag == ConditionalAccess::TAG) {
+ ConditionalAccess *ca = (ConditionalAccess *)*d;
+ if( save_pid.find( ca->CA_PID) == save_pid.end()) {
+ //secs[ ca->CA_PID] = new CAT( &des_parser);
+ if( ca->CA_PID != 0x1FFF) {
+ save_pid.insert( ca->CA_PID);
+ fprintf( stderr, "new pid 0x%04X, CA ID %u, cur pid 0x%04X\n", ca->CA_PID, ca->CA_system_ID, sec_it->first);
+ }
+ }
+ }
+ }
+
+ pmt->eraseElement( 0x0D);
+
+ for( e = pmt->elements.begin(); e != pmt->elements.end(); e++) {
+ if( save_pid.find( e->elementary_PID) == save_pid.end()) {
+ save_pid.insert( e->elementary_PID);
+ fprintf( stderr, "new pid 0x%04X, stream_type 0x%02X, cur pid 0x%04X\n", e->elementary_PID, e->stream_type, sec_it->first);
+ }
+
+ for( d = e->descriptors.begin(); d != e->descriptors.end(); d++) {
+ if( (*d)->descriptor_tag == ConditionalAccess::TAG) {
+ ConditionalAccess *ca = (ConditionalAccess *)*d;
+ if( save_pid.find( ca->CA_PID) == save_pid.end()) {
+ //secs[ ca->CA_PID] = new CAT( &des_parser);
+ if( ca->CA_PID != 0x1FFF) {
+ save_pid.insert( ca->CA_PID);
+ fprintf( stderr, "new pid 0x%04X, CA ID %u, cur pid 0x%04X\n", ca->CA_PID, ca->CA_system_ID, sec_it->first);
+ }
+ }
+ }
+ }
+ }
+ save_flag = true;
+ //}
+ }
+ }
+ }
+ else if( status != Section::CONTINUE) {
+ fprintf( stderr, "Section parse error = %d, PID = 0x%04X\n", status, ts->getPID());
+ }
+ } while( status == Section::INCLUDE_NEW_SECTION);
+ }
+#if 0
+ if( ofd == -1 && output_ts) {
+ ofd = open( "output.ts", O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ }
+
+ if( ofd > 0) {
+ if( ts->getPID() == 0x0000) {
+ PAT *pat = (PAT *)secs[ 0x0000];
+ if( pat->finish()) {
+ TSPacket *tmp_ts;
+ status = pat->getTSPacket( &tmp_ts, &pat_counter, ts->getAdaptationField());
+ if( status != Section::SUCCESS) {
+ fprintf( stderr, "PAT TS Packet rebuild error: %d\n", status);
+ }
+ else {
+ int w = tmp_ts->getBytes( write_buf, 1024);
+ if( w > 0) {
+ ::write( ofd, &write_buf, w);
+ }
+ }
+ }
+ }
+ else if( ts->getPID() == pmt_pid) {
+ PMT *pmt = (PMT *)secs[ pmt_pid];
+ if( pmt->finish()) {
+ TSPacket *tmp_ts;
+ status = pmt->getTSPacket( &tmp_ts, &pmt_counter, ts->getAdaptationField());
+ if( status != Section::SUCCESS) {
+ fprintf( stderr, "PMT TS Packet rebuild error: %d\n", status);
+ }
+ else {
+ int w = tmp_ts->getBytes( write_buf, 1024);
+ if( w > 0) {
+ ::write( ofd, &write_buf, w);
+ }
+ }
+ }
+ }
+ else if( save_pid.find( ts->getPID()) != save_pid.end()) {
+ int w = ts->getBytes( write_buf, 1024);
+ if( memcmp( write_buf, &buf[ index], w) != 0) {
+ fprintf( stderr, "TS Packet rebuild error: PID = 0x%04X\n", ts->getPID());
+ int i;
+ for( i = 0; i < w; i++) {
+ if( write_buf[ i] != buf[ index + i]) {
+ fprintf( stderr, "TS Packet rebuild error index = %d\n", i);
+ break;
+ }
+ }
+ }
+ if( w > 0) {
+ ::write( ofd, &write_buf, w);
+ }
+ }
+ }
+#endif
+ index += read_len;
+ }
+ offset = file_read_size - index;
+ memmove( buf, buf + index, offset);
+ }
+
+EXIT:
+ if( fd > 0) {
+ close( fd);
+ }
+ if( ofd > 0) {
+ close( ofd);
+ }
+
+ for( sec_it = secs.begin(); sec_it != secs.end(); sec_it++) {
+ delete sec_it->second;
+ }
+ secs.clear();
+
+ return 0;
+}
OSDN Git Service
