powernow-k6: reorder frequencies

This patch reorders reported frequencies from the highest to the lowest,
just like in other frequency drivers.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index 16359ab..b9a444e 100644 (file)
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -37,17 +37,20 @@ MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz");
 
 /* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
 static struct cpufreq_frequency_table clock_ratio[] = {
-       {45,  /* 000 -> 4.5x */ 0},
+       {60,  /* 110 -> 6.0x */ 0},
+       {55,  /* 011 -> 5.5x */ 0},
        {50,  /* 001 -> 5.0x */ 0},
+       {45,  /* 000 -> 4.5x */ 0},
        {40,  /* 010 -> 4.0x */ 0},
-       {55,  /* 011 -> 5.5x */ 0},
-       {20,  /* 100 -> 2.0x */ 0},
-       {30,  /* 101 -> 3.0x */ 0},
-       {60,  /* 110 -> 6.0x */ 0},
        {35,  /* 111 -> 3.5x */ 0},
+       {30,  /* 101 -> 3.0x */ 0},
+       {20,  /* 100 -> 2.0x */ 0},
        {0, CPUFREQ_TABLE_END}
 };
 
+static const u8 index_to_register[8] = { 6, 3, 1, 0, 2, 7, 5, 4 };
+static const u8 register_to_index[8] = { 3, 2, 4, 1, 7, 6, 0, 5 };
+
 static const struct {
        unsigned freq;
        unsigned mult;
@@ -91,7 +94,7 @@ static int powernow_k6_get_cpu_multiplier(void)
 
        local_irq_enable();
 
-       return clock_ratio[(invalue >> 5)&7].driver_data;
+       return clock_ratio[register_to_index[(invalue >> 5)&7]].driver_data;
 }
 
 static void powernow_k6_set_cpu_multiplier(unsigned int best_i)
@@ -111,7 +114,7 @@ static void powernow_k6_set_cpu_multiplier(unsigned int best_i)
        write_cr0(cr0 | X86_CR0_CD);
        wbinvd();
 
-       outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+       outvalue = (1<<12) | (1<<10) | (1<<9) | (index_to_register[best_i]<<5);
 
        msrval = POWERNOW_IOPORT + 0x1;
        wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */