V4L/DVB (4815): Remote support for Avermedia A16AR

The remote as well as the GPIO interface is the same as what comes with 777.
For an example of mplayer lirc configuration, see
	http://pasky.or.cz/~pasky/dev/v4l/lircrc

Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 94324b3..1a402e4 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3735,6 +3735,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
        case SAA7134_BOARD_FLYDVBT_LR301:
        case SAA7134_BOARD_FLYDVBTDUO:
        case SAA7134_BOARD_PROTEUS_2309:
+       case SAA7134_BOARD_AVERMEDIA_A16AR:
                dev->has_remote = SAA7134_REMOTE_GPIO;
                break;
        case SAA7134_BOARD_FLYDVBS_LR300:
@@ -3773,7 +3774,6 @@ int saa7134_board_init1(struct saa7134_dev *dev)
                saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
                saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
                break;
-       case SAA7134_BOARD_AVERMEDIA_A16AR:
        case SAA7134_BOARD_AVERMEDIA_CARDBUS:
                /* power-up tuner chip */
                saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0xffffffff);

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index e8dcb6f..7f62403 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -185,7 +185,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
        case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
        case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
        case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
-       case SAA7134_BOARD_AVERMEDIA_A16AR:
                ir_codes     = ir_codes_avermedia;
                mask_keycode = 0x0007C8;
                mask_keydown = 0x000010;
@@ -195,6 +194,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
                saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
                break;
        case SAA7134_BOARD_AVERMEDIA_777:
+       case SAA7134_BOARD_AVERMEDIA_A16AR:
                ir_codes     = ir_codes_avermedia;
                mask_keycode = 0x02F200;
                mask_keydown = 0x000400;