OSDN Git Service

gianfar: Add Scatter Gather support
authorDai Haruki <dai.haruki@freescale.com>
Thu, 18 Dec 2008 00:51:04 +0000 (16:51 -0800)
committerDavid S. Miller <davem@davemloft.net>
Thu, 18 Dec 2008 00:51:04 +0000 (16:51 -0800)
Scatter Gather support in gianfar driver to handle fragmented frames on
the transmit side.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/gianfar.c
drivers/net/gianfar.h
drivers/net/gianfar_ethtool.c

index a6efabc..dbbeee3 100644 (file)
@@ -368,7 +368,7 @@ static int gfar_probe(struct of_device *ofdev,
 
        if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
                priv->rx_csum_enable = 1;
-               dev->features |= NETIF_F_IP_CSUM;
+               dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA;
        } else
                priv->rx_csum_enable = 0;
 
@@ -426,6 +426,7 @@ static int gfar_probe(struct of_device *ofdev,
        priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
        priv->tx_ring_size = DEFAULT_TX_RING_SIZE;
        priv->rx_ring_size = DEFAULT_RX_RING_SIZE;
+       priv->num_txbdfree = DEFAULT_TX_RING_SIZE;
 
        priv->txcoalescing = DEFAULT_TX_COALESCE;
        priv->txic = DEFAULT_TXIC;
@@ -819,22 +820,26 @@ static void free_skb_resources(struct gfar_private *priv)
 {
        struct rxbd8 *rxbdp;
        struct txbd8 *txbdp;
-       int i;
+       int i, j;
 
        /* Go through all the buffer descriptors and free their data buffers */
        txbdp = priv->tx_bd_base;
 
        for (i = 0; i < priv->tx_ring_size; i++) {
+               if (!priv->tx_skbuff[i])
+                       continue;
 
-               if (priv->tx_skbuff[i]) {
-                       dma_unmap_single(&priv->dev->dev, txbdp->bufPtr,
-                                       txbdp->length,
-                                       DMA_TO_DEVICE);
-                       dev_kfree_skb_any(priv->tx_skbuff[i]);
-                       priv->tx_skbuff[i] = NULL;
+               dma_unmap_single(&priv->dev->dev, txbdp->bufPtr,
+                               txbdp->length, DMA_TO_DEVICE);
+               txbdp->lstatus = 0;
+               for (j = 0; j < skb_shinfo(priv->tx_skbuff[i])->nr_frags; j++) {
+                       txbdp++;
+                       dma_unmap_page(&priv->dev->dev, txbdp->bufPtr,
+                                       txbdp->length, DMA_TO_DEVICE);
                }
-
                txbdp++;
+               dev_kfree_skb_any(priv->tx_skbuff[i]);
+               priv->tx_skbuff[i] = NULL;
        }
 
        kfree(priv->tx_skbuff);
@@ -967,6 +972,7 @@ int startup_gfar(struct net_device *dev)
                priv->rx_skbuff[i] = NULL;
 
        /* Initialize some variables in our dev structure */
+       priv->num_txbdfree = priv->tx_ring_size;
        priv->dirty_tx = priv->cur_tx = priv->tx_bd_base;
        priv->cur_rx = priv->rx_bd_base;
        priv->skb_curtx = priv->skb_dirtytx = 0;
@@ -1207,28 +1213,84 @@ void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
        fcb->vlctl = vlan_tx_tag_get(skb);
 }
 
+static inline struct txbd8 *skip_txbd(struct txbd8 *bdp, int stride,
+                              struct txbd8 *base, int ring_size)
+{
+       struct txbd8 *new_bd = bdp + stride;
+
+       return (new_bd >= (base + ring_size)) ? (new_bd - ring_size) : new_bd;
+}
+
+static inline struct txbd8 *next_txbd(struct txbd8 *bdp, struct txbd8 *base,
+               int ring_size)
+{
+       return skip_txbd(bdp, 1, base, ring_size);
+}
+
 /* This is called by the kernel when a frame is ready for transmission. */
 /* It is pointed to by the dev->hard_start_xmit function pointer */
 static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
        struct gfar_private *priv = netdev_priv(dev);
        struct txfcb *fcb = NULL;
-       struct txbd8 *txbdp, *base;
+       struct txbd8 *txbdp, *txbdp_start, *base;
        u32 lstatus;
+       int i;
+       u32 bufaddr;
        unsigned long flags;
+       unsigned int nr_frags, length;
+
+       base = priv->tx_bd_base;
+
+       /* total number of fragments in the SKB */
+       nr_frags = skb_shinfo(skb)->nr_frags;
+
+       spin_lock_irqsave(&priv->txlock, flags);
+
+       /* check if there is space to queue this packet */
+       if (nr_frags > priv->num_txbdfree) {
+               /* no space, stop the queue */
+               netif_stop_queue(dev);
+               dev->stats.tx_fifo_errors++;
+               spin_unlock_irqrestore(&priv->txlock, flags);
+               return NETDEV_TX_BUSY;
+       }
 
        /* Update transmit stats */
        dev->stats.tx_bytes += skb->len;
 
-       /* Lock priv now */
-       spin_lock_irqsave(&priv->txlock, flags);
+       txbdp = txbdp_start = priv->cur_tx;
 
-       /* Point at the first free tx descriptor */
-       txbdp = priv->cur_tx;
-       base = priv->tx_bd_base;
+       if (nr_frags == 0) {
+               lstatus = txbdp->lstatus | BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
+       } else {
+               /* Place the fragment addresses and lengths into the TxBDs */
+               for (i = 0; i < nr_frags; i++) {
+                       /* Point at the next BD, wrapping as needed */
+                       txbdp = next_txbd(txbdp, base, priv->tx_ring_size);
+
+                       length = skb_shinfo(skb)->frags[i].size;
+
+                       lstatus = txbdp->lstatus | length |
+                               BD_LFLAG(TXBD_READY);
+
+                       /* Handle the last BD specially */
+                       if (i == nr_frags - 1)
+                               lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
+
+                       bufaddr = dma_map_page(&dev->dev,
+                                       skb_shinfo(skb)->frags[i].page,
+                                       skb_shinfo(skb)->frags[i].page_offset,
+                                       length,
+                                       DMA_TO_DEVICE);
+
+                       /* set the TxBD length and buffer pointer */
+                       txbdp->bufPtr = bufaddr;
+                       txbdp->lstatus = lstatus;
+               }
 
-       /* Clear all but the WRAP status flags */
-       lstatus = txbdp->lstatus & BD_LFLAG(TXBD_WRAP);
+               lstatus = txbdp_start->lstatus;
+       }
 
        /* Set up checksumming */
        if (CHECKSUM_PARTIAL == skb->ip_summed) {
@@ -1246,48 +1308,45 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
                gfar_tx_vlan(skb, fcb);
        }
 
-       /* Set buffer length and pointer */
-       txbdp->bufPtr = dma_map_single(&dev->dev, skb->data,
-                       skb->len, DMA_TO_DEVICE);
-
-       /* Save the skb pointer so we can free it later */
+       /* setup the TxBD length and buffer pointer for the first BD */
        priv->tx_skbuff[priv->skb_curtx] = skb;
+       txbdp_start->bufPtr = dma_map_single(&dev->dev, skb->data,
+                       skb_headlen(skb), DMA_TO_DEVICE);
 
-       /* Update the current skb pointer (wrapping if this was the last) */
-       priv->skb_curtx =
-           (priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size);
-
-       /* Flag the BD as ready, interrupt-causing, last, and in need of CRC */
-       lstatus |=
-               BD_LFLAG(TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT) |
-               skb->len;
-
-       dev->trans_start = jiffies;
+       lstatus |= BD_LFLAG(TXBD_CRC | TXBD_READY) | skb_headlen(skb);
 
-       /* The powerpc-specific eieio() is used, as wmb() has too strong
+       /*
+        * The powerpc-specific eieio() is used, as wmb() has too strong
         * semantics (it requires synchronization between cacheable and
         * uncacheable mappings, which eieio doesn't provide and which we
         * don't need), thus requiring a more expensive sync instruction.  At
         * some point, the set of architecture-independent barrier functions
         * should be expanded to include weaker barriers.
         */
-
        eieio();
-       txbdp->lstatus = lstatus;
 
-       txbdp = next_bd(txbdp, base, priv->tx_ring_size);
+       txbdp_start->lstatus = lstatus;
+
+       /* Update the current skb pointer to the next entry we will use
+        * (wrapping if necessary) */
+       priv->skb_curtx = (priv->skb_curtx + 1) &
+               TX_RING_MOD_MASK(priv->tx_ring_size);
+
+       priv->cur_tx = next_txbd(txbdp, base, priv->tx_ring_size);
+
+       /* reduce TxBD free count */
+       priv->num_txbdfree -= (nr_frags + 1);
+
+       dev->trans_start = jiffies;
 
        /* If the next BD still needs to be cleaned up, then the bds
           are full.  We need to tell the kernel to stop sending us stuff. */
-       if (txbdp == priv->dirty_tx) {
+       if (!priv->num_txbdfree) {
                netif_stop_queue(dev);
 
                dev->stats.tx_fifo_errors++;
        }
 
-       /* Update the current txbd to the next one */
-       priv->cur_tx = txbdp;
-
        /* Tell the DMA to go go go */
        gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
 
@@ -1461,50 +1520,66 @@ static void gfar_timeout(struct net_device *dev)
 /* Interrupt Handler for Transmit complete */
 static int gfar_clean_tx_ring(struct net_device *dev)
 {
-       struct txbd8 *bdp, *base;
        struct gfar_private *priv = netdev_priv(dev);
+       struct txbd8 *bdp;
+       struct txbd8 *lbdp = NULL;
+       struct txbd8 *base = priv->tx_bd_base;
+       struct sk_buff *skb;
+       int skb_dirtytx;
+       int tx_ring_size = priv->tx_ring_size;
+       int frags = 0;
+       int i;
        int howmany = 0;
+       u32 lstatus;
 
        bdp = priv->dirty_tx;
-       base = priv->tx_bd_base;
-       while ((bdp->status & TXBD_READY) == 0) {
-               /* If dirty_tx and cur_tx are the same, then either the */
-               /* ring is empty or full now (it could only be full in the beginning, */
-               /* obviously).  If it is empty, we are done. */
-               if ((bdp == priv->cur_tx) && (netif_queue_stopped(dev) == 0))
-                       break;
+       skb_dirtytx = priv->skb_dirtytx;
 
-               howmany++;
+       while ((skb = priv->tx_skbuff[skb_dirtytx])) {
+               frags = skb_shinfo(skb)->nr_frags;
+               lbdp = skip_txbd(bdp, frags, base, tx_ring_size);
 
-               /* Deferred means some collisions occurred during transmit, */
-               /* but we eventually sent the packet. */
-               if (bdp->status & TXBD_DEF)
-                       dev->stats.collisions++;
+               lstatus = lbdp->lstatus;
 
-               /* Unmap the DMA memory */
-               dma_unmap_single(&priv->dev->dev, bdp->bufPtr,
-                               bdp->length, DMA_TO_DEVICE);
+               /* Only clean completed frames */
+               if ((lstatus & BD_LFLAG(TXBD_READY)) &&
+                               (lstatus & BD_LENGTH_MASK))
+                       break;
+
+               dma_unmap_single(&dev->dev,
+                               bdp->bufPtr,
+                               bdp->length,
+                               DMA_TO_DEVICE);
 
-               /* Free the sk buffer associated with this TxBD */
-               dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]);
+               bdp->lstatus &= BD_LFLAG(TXBD_WRAP);
+               bdp = next_txbd(bdp, base, tx_ring_size);
 
-               priv->tx_skbuff[priv->skb_dirtytx] = NULL;
-               priv->skb_dirtytx =
-                   (priv->skb_dirtytx +
-                    1) & TX_RING_MOD_MASK(priv->tx_ring_size);
+               for (i = 0; i < frags; i++) {
+                       dma_unmap_page(&dev->dev,
+                                       bdp->bufPtr,
+                                       bdp->length,
+                                       DMA_TO_DEVICE);
+                       bdp->lstatus &= BD_LFLAG(TXBD_WRAP);
+                       bdp = next_txbd(bdp, base, tx_ring_size);
+               }
 
-               /* Clean BD length for empty detection */
-               bdp->length = 0;
+               dev_kfree_skb_any(skb);
+               priv->tx_skbuff[skb_dirtytx] = NULL;
 
-               bdp = next_bd(bdp, base, priv->tx_ring_size);
+               skb_dirtytx = (skb_dirtytx + 1) &
+                       TX_RING_MOD_MASK(tx_ring_size);
+
+               howmany++;
+               priv->num_txbdfree += frags + 1;
+       }
 
-               /* Move dirty_tx to be the next bd */
-               priv->dirty_tx = bdp;
+       /* If we freed a buffer, we can restart transmission, if necessary */
+       if (netif_queue_stopped(dev) && priv->num_txbdfree)
+               netif_wake_queue(dev);
 
-               /* We freed a buffer, so now we can restart transmission */
-               if (netif_queue_stopped(dev))
-                       netif_wake_queue(dev);
-       } /* while ((bdp->status & TXBD_READY) == 0) */
+       /* Update dirty indicators */
+       priv->skb_dirtytx = skb_dirtytx;
+       priv->dirty_tx = bdp;
 
        dev->stats.tx_packets += howmany;
 
index 9c8974d..7ef3cc5 100644 (file)
@@ -728,6 +728,7 @@ struct gfar_private {
        struct txbd8 *dirty_tx;         /* First buffer in line
                                           to be transmitted */
        unsigned int tx_ring_size;
+       unsigned int num_txbdfree;      /* number of TxBDs free */
 
        /* RX Locked fields */
        spinlock_t rxlock;
index 3021057..59b3b5d 100644 (file)
@@ -475,6 +475,7 @@ static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rva
        /* Change the size */
        priv->rx_ring_size = rvals->rx_pending;
        priv->tx_ring_size = rvals->tx_pending;
+       priv->num_txbdfree = priv->tx_ring_size;
 
        /* Rebuild the rings with the new size */
        if (dev->flags & IFF_UP) {
@@ -623,6 +624,7 @@ const struct ethtool_ops gfar_ethtool_ops = {
        .get_tx_csum = gfar_get_tx_csum,
        .set_rx_csum = gfar_set_rx_csum,
        .set_tx_csum = gfar_set_tx_csum,
+       .set_sg = ethtool_op_set_sg,
        .get_msglevel = gfar_get_msglevel,
        .set_msglevel = gfar_set_msglevel,
 #ifdef CONFIG_PM