[MIPS] Fix swap entry for MIPS32 36-bit physical address

With 64-bit physical address enabled, 'swapon' was causing kernel oops on
Alchemy CPUs (MIPS32) because of the swap entry type field corrupting the
_PAGE_FILE bit in 'pte_low' field. So, switch to storing the swap entry in
'pte_high' field using all its bits except _PAGE_GLOBAL and _PAGE_VALID which
gives 25 bits for the swap entry offset.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h
index 4d6bc45..a5ce3f1 100644 (file)
--- a/include/asm-mips/pgtable-32.h
+++ b/include/asm-mips/pgtable-32.h
@@ -191,10 +191,17 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
 #else
 
 /* Swap entries must have VALID and GLOBAL bits cleared. */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __swp_type(x)          (((x).val >> 2) & 0x1f)
+#define __swp_offset(x)         ((x).val >> 7)
+#define __swp_entry(type,offset)       \
+               ((swp_entry_t)  { ((type) << 2) | ((offset) << 7) })
+#else
 #define __swp_type(x)          (((x).val >> 8) & 0x1f)
-#define __swp_offset(x)                ((x).val >> 13)
+#define __swp_offset(x)         ((x).val >> 13)
 #define __swp_entry(type,offset)       \
-               ((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+               ((swp_entry_t)  { ((type) << 8) | ((offset) << 13) })
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
 
 /*
  * Bits 0, 1, 2, 7 and 8 are taken, split up the 27 bits of offset
@@ -218,7 +225,12 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
 
 #endif
 
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x)  ((pte_t) { 0, (x).val })
+#else
 #define __pte_to_swp_entry(pte)        ((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)  ((pte_t) { (x).val })
+#endif
 
 #endif /* _ASM_PGTABLE_32_H */