&cpsw_emac0 {
phy-handle = <ðphy0>;
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
};
&tscadc {
&cpsw_emac0 {
phy-handle = <ðphy0>;
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy-handle = <ðphy1>;
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
status = "okay";
};
- nand@d0000 {
+ nand-controller@d0000 {
status = "okay";
- label = "pxa3xx_nand-0";
- num-cs = <1>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
};
};
};
status = "okay";
};
- nand@d0000 {
+ nand-controller@d0000 {
status = "okay";
- label = "pxa3xx_nand-0";
- num-cs = <1>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ nand-on-flash-bbt;
+ };
};
};
};
- nand@d0000 {
+ nand-controller@d0000 {
status = "okay";
- label = "pxa3xx_nand-0";
- num-cs = <1>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x000e0000>;
- read-only;
- };
-
- partition@e0000 {
- label = "u-boot-env";
- reg = <0x000e0000 0x00020000>;
- read-only;
- };
-
- partition@100000 {
- label = "u-boot-env2";
- reg = <0x00100000 0x00020000>;
- read-only;
- };
-
- partition@120000 {
- label = "zImage";
- reg = <0x00120000 0x00400000>;
- };
-
- partition@520000 {
- label = "initrd";
- reg = <0x00520000 0x00400000>;
- };
- partition@e00000 {
- label = "boot";
- reg = <0x00e00000 0x3f200000>;
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x000e0000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0x000e0000 0x00020000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env2";
+ reg = <0x00100000 0x00020000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "zImage";
+ reg = <0x00120000 0x00400000>;
+ };
+
+ partition@520000 {
+ label = "initrd";
+ reg = <0x00520000 0x00400000>;
+ };
+
+ partition@e00000 {
+ label = "boot";
+ reg = <0x00e00000 0x3f200000>;
+ };
};
};
};
stdout-path = "serial0:115200n8";
};
- memory@80000000 {
+ /*
+ * Note that recent version of the device tree compiler (starting with
+ * version 1.4.2) warn about this node containing a reg property, but
+ * missing a unit-address. However, the bootloader on these Chromebook
+ * devices relies on the full name of this node to be exactly /memory.
+ * Adding the unit-address causes the bootloader to create a /memory
+ * node and write the memory bank configuration to that node, which in
+ * turn leads the kernel to believe that the device has 2 GiB of
+ * memory instead of the amount detected by the bootloader.
+ *
+ * The name of this node is effectively ABI and must not be changed.
+ */
+ memory {
+ device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
+ /delete-node/ memory@80000000;
+
host1x@50000000 {
hdmi@54280000 {
status = "okay";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_copper_eth_phy_reset>;
- reset-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
};