git.osdn.net Git - android-x86/kernel.git/log

KVM: Let KVM_SET_SIGNAL_MASK work as advertised

[ Upstream commit 20b7035c66bacc909ae3ffe92c1a1ea7db99fe4f ]

KVM API says for the signal mask you set via KVM_SET_SIGNAL_MASK, that
"any unblocked signal received [...] will cause KVM_RUN to return with
-EINTR" and that "the signal will only be delivered if not blocked by
the original signal mask".

This, however, is only true, when the calling task has a signal handler
registered for a signal. If not, signal evaluation is short-circuited for
SIG_IGN and SIG_DFL, and the signal is either ignored without KVM_RUN
returning or the whole process is terminated.

Make KVM_SET_SIGNAL_MASK behave as advertised by utilizing logic similar
to that in do_sigtimedwait() to avoid short-circuiting of signals.

Signed-off-by: Jan H. SchÃ¶nherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix list_add corruption and soft lockups in fsync

[ Upstream commit ebb70442cdd4872260c2415929c456be3562da82 ]

Xfstests btrfs/146 revealed this corruption,

[   58.138831] Buffer I/O error on dev dm-0, logical block 2621424, async page read
[   58.151233] BTRFS error (device sdf): bdev /dev/mapper/error-test errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
[   58.152403] list_add corruption. prev->next should be next (ffff88005e6775d8), but was ffffc9000189be88. (prev=ffffc9000189be88).
[   58.153518] ------------[ cut here ]------------
[   58.153892] WARNING: CPU: 1 PID: 1287 at lib/list_debug.c:31 __list_add_valid+0x169/0x1f0
...
[   58.157379] RIP: 0010:__list_add_valid+0x169/0x1f0
...
[   58.161956] Call Trace:
[   58.162264]  btrfs_log_inode_parent+0x5bd/0xfb0 [btrfs]
[   58.163583]  btrfs_log_dentry_safe+0x60/0x80 [btrfs]
[   58.164003]  btrfs_sync_file+0x4c2/0x6f0 [btrfs]
[   58.164393]  vfs_fsync_range+0x5f/0xd0
[   58.164898]  do_fsync+0x5a/0x90
[   58.165170]  SyS_fsync+0x10/0x20
[   58.165395]  entry_SYSCALL_64_fastpath+0x1f/0xbe
...

It turns out that we could record btrfs_log_ctx:io_err in
log_one_extents when IO fails, but make log_one_extents() return '0'
instead of -EIO, so the IO error is not acknowledged by the callers,
i.e.  btrfs_log_inode_parent(), which would remove btrfs_log_ctx:list
from list head 'root->log_ctxs'.  Since btrfs_log_ctx is allocated
from stack memory, it'd get freed with a object alive on the
list. then a future list_add will throw the above warning.

This returns the correct error in the above case.

Jeff also reported this while testing against his fsync error
patch set[1].

[1]: https://www.spinics.net/lists/linux-btrfs/msg65308.html
"btrfs list corruption and soft lockups while testing writeback error handling"

Fixes: 8407f553268a4611f254 ("Btrfs: fix data corruption after fast fsync and writeback error")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Fix rflags cache during vCPU reset

[ Upstream commit c37c28730bb031cc8a44a130c2555c0f3efbe2d0 ]

Reported by syzkaller:

   *** Guest State ***
   CR0: actual=0x0000000080010031, shadow=0x0000000060000010, gh_mask=fffffffffffffff7
   CR4: actual=0x0000000000002061, shadow=0x0000000000000000, gh_mask=ffffffffffffe8f1
   CR3 = 0x000000002081e000
   RSP = 0x000000000000fffa  RIP = 0x0000000000000000
   RFLAGS=0x00023000         DR7 = 0x00000000000000
          ^^^^^^^^^^
   ------------[ cut here ]------------
   WARNING: CPU: 6 PID: 24431 at /home/kernel/linux/arch/x86/kvm//x86.c:7302 kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm]
   CPU: 6 PID: 24431 Comm: reprotest Tainted: G        W  OE   4.14.0+ #26
   RIP: 0010:kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm]
   RSP: 0018:ffff880291d179e0 EFLAGS: 00010202
   Call Trace:
    kvm_vcpu_ioctl+0x479/0x880 [kvm]
    do_vfs_ioctl+0x142/0x9a0
    SyS_ioctl+0x74/0x80
    entry_SYSCALL_64_fastpath+0x23/0x9a

The failed vmentry is triggered by the following beautified testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[5];
    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
        struct kvm_guest_debug debug = {
                .control = 0xf0403,
                .arch = {
                        .debugreg[6] = 0x2,
                        .debugreg[7] = 0x2
                }
        };
        ioctl(r[4], KVM_SET_GUEST_DEBUG, &debug);
        ioctl(r[4], KVM_RUN, 0);
    }

which testcase tries to setup the processor specific debug
registers and configure vCPU for handling guest debug events through
KVM_SET_GUEST_DEBUG.  The KVM_SET_GUEST_DEBUG ioctl will get and set
rflags in order to set TF bit if single step is needed. All regs' caches
are reset to avail and GUEST_RFLAGS vmcs field is reset to 0x2 during vCPU
reset. However, the cache of rflags is not reset during vCPU reset. The
function vmx_get_rflags() returns an unreset rflags cache value since
the cache is marked avail, it is 0 after boot. Vmentry fails if the
rflags reserved bit 1 is 0.

This patch fixes it by resetting both the GUEST_RFLAGS vmcs field and
its cache to 0x2 during vCPU reset.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Fix softlockup when get the current kvmclock

[ Upstream commit e70b57a6ce4e8b92a56a615ae79bdb2bd66035e7 ]

watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [qemu-system-x86:10185]
CPU: 6 PID: 10185 Comm: qemu-system-x86 Tainted: G           OE   4.14.0-rc4+ #4
RIP: 0010:kvm_get_time_scale+0x4e/0xa0 [kvm]
Call Trace:
  get_time_ref_counter+0x5a/0x80 [kvm]
  kvm_hv_process_stimers+0x120/0x5f0 [kvm]
  kvm_arch_vcpu_ioctl_run+0x4b4/0x1690 [kvm]
  kvm_vcpu_ioctl+0x33a/0x620 [kvm]
  do_vfs_ioctl+0xa1/0x5d0
  SyS_ioctl+0x79/0x90
  entry_SYSCALL_64_fastpath+0x1e/0xa9

This can be reproduced when running kvm-unit-tests/hyperv_stimer.flat and
cpu-hotplug stress simultaneously. __this_cpu_read(cpu_tsc_khz) returns 0
(set in kvmclock_cpu_down_prep()) when the pCPU is unhotplug which results
in kvm_get_time_scale() gets into an infinite loop.

This patch fixes it by treating the unhotplug pCPU as not using master clock.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: remove unneeded i_version bump

[ Upstream commit 9f97df50c52c2887432debb6238f4e43567386a5 ]

The i_version field in reiserfs is not initialized and is only ever
updated here. Nothing ever views it, so just remove it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: set sender next_tsn for the old result with ctsn_ack_point plus 1

[ Upstream commit 52a395896a051a3d5c34fba67c324f69ec5e67c6 ]

When doing asoc reset, if the sender of the response has already sent some
chunk and increased asoc->next_tsn before the duplicate request comes, the
response will use the old result with an incorrect sender next_tsn.

Better than asoc->next_tsn, asoc->ctsn_ack_point can't be changed after
the sender of the response has performed the asoc reset and before the
peer has confirmed it, and it's value is still asoc->next_tsn original
value minus 1.

This patch sets sender next_tsn for the old result with ctsn_ack_point
plus 1 when processing the duplicate request, to make sure the sender
next_tsn value peer gets will be always right.

Fixes: 692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: avoid flushing unsent queue when doing asoc reset

[ Upstream commit 159f2a7456c6ae95c1e1a58e8b8ec65ef12d51cf ]

Now when doing asoc reset, it cleans up sacked and abandoned queues
by calling sctp_outq_free where it also cleans up unsent, retransmit
and transmitted queues.

It's safe for the sender of response, as these 3 queues are empty at
that time. But when the receiver of response is doing the reset, the
users may already enqueue some chunks into unsent during the time
waiting the response, and these chunks should not be flushed.

To void the chunks in it would be removed, it moves the queue into a
temp list, then gets it back after sctp_outq_free is done.

The patch also fixes some incorrect comments in
sctp_process_strreset_tsnreq.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: only allow the asoc reset when the asoc outq is empty

[ Upstream commit 5c6144a0eb5366ae07fc5059301b139338f39bbd ]

As it says in rfc6525#section5.1.4, before sending the request,

C2: The sender has either no outstanding TSNs or considers all
outstanding TSNs abandoned.

Prior to this patch, it tried to consider all outstanding TSNs abandoned
by dropping all chunks in all outqs with sctp_outq_free (even including
sacked, retransmit and transmitted queues) when doing this reset, which
is too aggressive.

To make it work gently, this patch will only allow the asoc reset when
the sender has no outstanding TSNs by checking if unsent, transmitted
and retransmit are all empty with sctp_outq_is_empty before sending
and processing the request.

Fixes: 692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix deadlock when writing out space cache

[ Upstream commit b77000ed558daa3bef0899d29bf171b8c9b5e6a8 ]

If we fail to prepare our pages for whatever reason (out of memory in
our case) we need to make sure to drop the block_group->data_rwsem,
otherwise hilarity ensues.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add label and use existing unlocking code ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix the update of path metric for RANN frame

[ Upstream commit fbbdad5edf0bb59786a51b94a9d006bc8c2da9a2 ]

The previous path metric update from RANN frame has not considered
the own link metric toward the transmitting mesh STA. Fix this.

Reported-by: Michael65535
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: use QoS NDP for AP probing

[ Upstream commit 7b6ddeaf27eca72795ceeae2f0f347db1b5f9a30 ]

When connected to a QoS/WMM AP, mac80211 should use a QoS NDP
for probing it, instead of a regular non-QoS one, fix this.

Change all the drivers to *not* allow QoS NDP for now, even
though it looks like most of them should be OK with that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: dw-mipi-dsi: fix possible un-balanced runtime PM enable

[ Upstream commit 517f56839f581618d24f2e67a35738a5c6cbaecb ]

In the case where the bind gets deferred we would end up with a
un-balanced runtime PM enable call.

Fix this by simply moving the pm_runtime_enable call to the end of
the bind function when all paths have succeeded.

Signed-off-by: Mirza Krak <mirza.krak@endian.se>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510734286-37434-1-git-send-email-mirza.krak@endian.se
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: fix the incorrect flow action alloc size

[ Upstream commit 67c8d22a73128ff910e2287567132530abcf5b71 ]

If we want to add a datapath flow, which has more than 500 vxlan outputs'
action, we will get the following error reports:
  openvswitch: netlink: Flow action size 32832 bytes exceeds max
  openvswitch: netlink: Flow action size 32832 bytes exceeds max
  openvswitch: netlink: Actions may not be safe on all matching packets
  ... ...

It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but
this is not the root cause. For example, for a vxlan output action, we need
about 60 bytes for the nlattr, but after it is converted to the flow
action, it only occupies 24 bytes. This means that we can still support
more than 1000 vxlan output actions for a single datapath flow under the
the current 32k max limitation.

So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we
shouldn't report EINVAL and keep it move on, as the judgement can be
done by the reserve_sfa_size.

Signed-off-by: zhangliping <zhangliping02@baidu.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-rdma: don't complete requests before a send work request has completed

[ Upstream commit 4af7f7ff92a42b6c713293c99e7982bcfcf51a70 ]

In order to guarantee that the HCA will never get an access violation
(either from invalidated rkey or from iommu) when retrying a send
operation we must complete a request only when both send completion and
the nvme cqe has arrived. We need to set the send/recv completions flags
atomically because we might have more than a single context accessing the
request concurrently (one is cq irq-poll context and the other is
user-polling used in IOCB_HIPRI).

Only then we are safe to invalidate the rkey (if needed), unmap the host
buffers, and complete the IO.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uapi: fix linux/kfd_ioctl.h userspace compilation errors

[ Upstream commit b4d085201d86af69cbda2214c6dafc0be240ef9f ]

Consistently use types provided by <linux/types.h> via <drm/drm.h>
to fix the following linux/kfd_ioctl.h userspace compilation errors:

/usr/include/linux/kfd_ioctl.h:236:2: error: unknown type name 'uint64_t'
  uint64_t va_addr; /* to KFD */
/usr/include/linux/kfd_ioctl.h:237:2: error: unknown type name 'uint32_t'
  uint32_t gpu_id; /* to KFD */
/usr/include/linux/kfd_ioctl.h:238:2: error: unknown type name 'uint32_t'
  uint32_t pad;
/usr/include/linux/kfd_ioctl.h:243:2: error: unknown type name 'uint64_t'
  uint64_t tile_config_ptr;
/usr/include/linux/kfd_ioctl.h:245:2: error: unknown type name 'uint64_t'
  uint64_t macro_tile_config_ptr;
/usr/include/linux/kfd_ioctl.h:249:2: error: unknown type name 'uint32_t'
  uint32_t num_tile_configs;
/usr/include/linux/kfd_ioctl.h:253:2: error: unknown type name 'uint32_t'
  uint32_t num_macro_tile_configs;
/usr/include/linux/kfd_ioctl.h:255:2: error: unknown type name 'uint32_t'
  uint32_t gpu_id;  /* to KFD */
/usr/include/linux/kfd_ioctl.h:256:2: error: unknown type name 'uint32_t'
  uint32_t gb_addr_config; /* from KFD */
/usr/include/linux/kfd_ioctl.h:257:2: error: unknown type name 'uint32_t'
  uint32_t num_banks;  /* from KFD */
/usr/include/linux/kfd_ioctl.h:258:2: error: unknown type name 'uint32_t'
  uint32_t num_ranks;  /* from KFD */

Fixes: 6a1c9510694fe ("drm/amdkfd: Adding new IOCTL for scratch memory v2")
Fixes: 5d71dbc3a5886 ("drm/amdkfd: Implement image tiling mode support v2")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Fix SDMA oversubsription handling

[ Upstream commit 8c946b8988acec785bcf67088b6bd0747f36d2d3 ]

SDMA only supports a fixed number of queues. HWS cannot handle
oversubscription.

Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Fix SDMA ring buffer size calculation

[ Upstream commit d12fb13f23199faa7e536acec1db49068e5a067d ]

ffs function return the position of the first bit set on 1 based.
(bit zero returns 1).

Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode

[ Upstream commit cf21654b40968609779751b34e7923180968fe5b ]

Fix the SDMA load and unload sequence as suggested by HW document.

Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: check return value of register_shrinker

[ Upstream commit 6c4ca1e36cdc1a0a7a84797804b87920ccbebf51 ]

register_shrinker is now __must_check, so check it to kill a warning.
Caller of bch_btree_cache_alloc in super.c appropriately checks return
value so this is fully plumbed through.

This V2 fixes checkpatch warnings and improves the commit description,
as I was too hasty getting the previous version out.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix service endpoint expiry

[ Upstream commit f859ab61875978eeaa539740ff7f7d91f5d60006 ]

RxRPC service endpoints expire like they're supposed to by the following
means:

(1) Mark dead rxrpc_net structs (with ->live) rather than twiddling the
     global service conn timeout, otherwise the first rxrpc_net struct to
     die will cause connections on all others to expire immediately from
     then on.

(2) Mark local service endpoints for which the socket has been closed
     (->service_closed) so that the expiration timeout can be much
     shortened for service and client connections going through that
     endpoint.

(3) rxrpc_put_service_conn() needs to schedule the reaper when the usage
     count reaches 1, not 0, as idle conns have a 1 count.

(4) The accumulator for the earliest time we might want to schedule for
     should be initialised to jiffies + MAX_JIFFY_OFFSET, not ULONG_MAX as
     the comparison functions use signed arithmetic.

(5) Simplify the expiration handling, adding the expiration value to the
     idle timestamp each time rather than keeping track of the time in the
     past before which the idle timestamp must go to be expired.  This is
     much easier to read.

(6) Ignore the timeouts if the net namespace is dead.

(7) Restart the service reaper work item rather the client reaper.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Provide a different lockdep key for call->user_mutex for kernel calls

[ Upstream commit 9faaff593404a9c4e5abc6839a641635d7b9d0cd ]

Provide a different lockdep key for rxrpc_call::user_mutex when the call is
made on a kernel socket, such as by the AFS filesystem.

The problem is that lockdep registers a false positive between userspace
calling the sendmsg syscall on a user socket where call->user_mutex is held
whilst userspace memory is accessed whereas the AFS filesystem may perform
operations with mmap_sem held by the caller.

In such a case, the following warning is produced.

======================================================
WARNING: possible circular locking dependency detected
4.14.0-fscache+ #243 Tainted: G            E
------------------------------------------------------
modpost/16701 is trying to acquire lock:
(&vnode->io_lock){+.+.}, at: [<ffffffffa000fc40>] afs_begin_vnode_operation+0x33/0x77 [kafs]

but task is already holding lock:
(&mm->mmap_sem){++++}, at: [<ffffffff8104376a>] __do_page_fault+0x1ef/0x486

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&mm->mmap_sem){++++}:
       __might_fault+0x61/0x89
       _copy_from_iter_full+0x40/0x1fa
       rxrpc_send_data+0x8dc/0xff3
       rxrpc_do_sendmsg+0x62f/0x6a1
       rxrpc_sendmsg+0x166/0x1b7
       sock_sendmsg+0x2d/0x39
       ___sys_sendmsg+0x1ad/0x22b
       __sys_sendmsg+0x41/0x62
       do_syscall_64+0x89/0x1be
       return_from_SYSCALL_64+0x0/0x75

-> #2 (&call->user_mutex){+.+.}:
       __mutex_lock+0x86/0x7d2
       rxrpc_new_client_call+0x378/0x80e
       rxrpc_kernel_begin_call+0xf3/0x154
       afs_make_call+0x195/0x454 [kafs]
       afs_vl_get_capabilities+0x193/0x198 [kafs]
       afs_vl_lookup_vldb+0x5f/0x151 [kafs]
       afs_create_volume+0x2e/0x2f4 [kafs]
       afs_mount+0x56a/0x8d7 [kafs]
       mount_fs+0x6a/0x109
       vfs_kern_mount+0x67/0x135
       do_mount+0x90b/0xb57
       SyS_mount+0x72/0x98
       do_syscall_64+0x89/0x1be
       return_from_SYSCALL_64+0x0/0x75

-> #1 (k-sk_lock-AF_RXRPC){+.+.}:
       lock_sock_nested+0x74/0x8a
       rxrpc_kernel_begin_call+0x8a/0x154
       afs_make_call+0x195/0x454 [kafs]
       afs_fs_get_capabilities+0x17a/0x17f [kafs]
       afs_probe_fileserver+0xf7/0x2f0 [kafs]
       afs_select_fileserver+0x83f/0x903 [kafs]
       afs_fetch_status+0x89/0x11d [kafs]
       afs_iget+0x16f/0x4f8 [kafs]
       afs_mount+0x6c6/0x8d7 [kafs]
       mount_fs+0x6a/0x109
       vfs_kern_mount+0x67/0x135
       do_mount+0x90b/0xb57
       SyS_mount+0x72/0x98
       do_syscall_64+0x89/0x1be
       return_from_SYSCALL_64+0x0/0x75

-> #0 (&vnode->io_lock){+.+.}:
       lock_acquire+0x174/0x19f
       __mutex_lock+0x86/0x7d2
       afs_begin_vnode_operation+0x33/0x77 [kafs]
       afs_fetch_data+0x80/0x12a [kafs]
       afs_readpages+0x314/0x405 [kafs]
       __do_page_cache_readahead+0x203/0x2ba
       filemap_fault+0x179/0x54d
       __do_fault+0x17/0x60
       __handle_mm_fault+0x6d7/0x95c
       handle_mm_fault+0x24e/0x2a3
       __do_page_fault+0x301/0x486
       do_page_fault+0x236/0x259
       page_fault+0x22/0x30
       __clear_user+0x3d/0x60
       padzero+0x1c/0x2b
       load_elf_binary+0x785/0xdc7
       search_binary_handler+0x81/0x1ff
       do_execveat_common.isra.14+0x600/0x888
       do_execve+0x1f/0x21
       SyS_execve+0x28/0x2f
       do_syscall_64+0x89/0x1be
       return_from_SYSCALL_64+0x0/0x75

other info that might help us debug this:

Chain exists of:
  &vnode->io_lock --> &call->user_mutex --> &mm->mmap_sem

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&mm->mmap_sem);
                               lock(&call->user_mutex);
                               lock(&mm->mmap_sem);
  lock(&vnode->io_lock);

*** DEADLOCK ***

1 lock held by modpost/16701:
#0:  (&mm->mmap_sem){++++}, at: [<ffffffff8104376a>] __do_page_fault+0x1ef/0x486

stack backtrace:
CPU: 0 PID: 16701 Comm: modpost Tainted: G            E   4.14.0-fscache+ #243
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
dump_stack+0x67/0x8e
print_circular_bug+0x341/0x34f
check_prev_add+0x11f/0x5d4
? add_lock_to_list.isra.12+0x8b/0x8b
? add_lock_to_list.isra.12+0x8b/0x8b
? __lock_acquire+0xf77/0x10b4
__lock_acquire+0xf77/0x10b4
lock_acquire+0x174/0x19f
? afs_begin_vnode_operation+0x33/0x77 [kafs]
__mutex_lock+0x86/0x7d2
? afs_begin_vnode_operation+0x33/0x77 [kafs]
? afs_begin_vnode_operation+0x33/0x77 [kafs]
? afs_begin_vnode_operation+0x33/0x77 [kafs]
afs_begin_vnode_operation+0x33/0x77 [kafs]
afs_fetch_data+0x80/0x12a [kafs]
afs_readpages+0x314/0x405 [kafs]
__do_page_cache_readahead+0x203/0x2ba
? filemap_fault+0x179/0x54d
filemap_fault+0x179/0x54d
__do_fault+0x17/0x60
__handle_mm_fault+0x6d7/0x95c
handle_mm_fault+0x24e/0x2a3
__do_page_fault+0x301/0x486
do_page_fault+0x236/0x259
page_fault+0x22/0x30
RIP: 0010:__clear_user+0x3d/0x60
RSP: 0018:ffff880071e93da0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 000000000000011c RCX: 000000000000011c
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000060f720
RBP: 000000000060f720 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: ffff8800b5459b68 R12: ffff8800ce150e00
R13: 000000000060f720 R14: 00000000006127a8 R15: 0000000000000000
padzero+0x1c/0x2b
load_elf_binary+0x785/0xdc7
search_binary_handler+0x81/0x1ff
do_execveat_common.isra.14+0x600/0x888
do_execve+0x1f/0x21
SyS_execve+0x28/0x2f
do_syscall_64+0x89/0x1be
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7fdb6009ee07
RSP: 002b:00007fff566d9728 EFLAGS: 00000246 ORIG_RAX: 000000000000003b
RAX: ffffffffffffffda RBX: 000055ba57280900 RCX: 00007fdb6009ee07
RDX: 000055ba5727f270 RSI: 000055ba5727cac0 RDI: 000055ba57280900
RBP: 000055ba57280900 R08: 00007fff566d9700 R09: 0000000000000000
R10: 000055ba5727cac0 R11: 0000000000000246 R12: 0000000000000000
R13: 000055ba5727cac0 R14: 000055ba5727f270 R15: 0000000000000000

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: The mutex lock returned by rxrpc_accept_call() needs releasing

[ Upstream commit 03a6c82218b9a87014b2c6c4e178294fdc8ebd8a ]

The caller of rxrpc_accept_call() must release the lock on call->user_mutex
returned by that function.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix alloc_pgste check in init_new_context again

[ Upstream commit 53c4ab70c11c3ba1b9e3caa8e8c17e9c16d9cbc0 ]

git commit badb8bb983e9 "fix alloc_pgste check in init_new_context" fixed
the problem of 'current->mm == NULL' in init_new_context back in 2011.

git commit 3eabaee998c7 "KVM: s390: allow sie enablement for multi-
threaded programs" completely removed the check against alloc_pgste.

git commit 23fefe119ceb "s390/kvm: avoid global config of vm.alloc_pgste=1"
re-added a check against the alloc_pgste flag but without the required
check for current->mm != NULL.

For execve() called by a kernel thread init_new_context() reads from
((struct mm_struct *) NULL)->context.alloc_pgste to decide between
2K vs 4K page tables. If the bit happens to be set for the init process
it will be created with large page tables. This decision is inherited by
all the children of init, this waste quite some memory.

Re-add the check for 'current->mm != NULL'.

Fixes: 23fefe119ceb ("s390/kvm: avoid global config of vm.alloc_pgste=1")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

null_blk: fix dev->badblocks leak

[ Upstream commit 1addb798e93893d33c8dfab743cd44f09fd7719a ]

null_alloc_dev() allocates memory for dev->badblocks, but cleanup
currently only occurs in the configfs release codepath, missing a number
of other places.

This bug was found running the blktests block/010 test, alongside
kmemleak:
rapido1:/blktests# ./check block/010
...
rapido1:/blktests# echo scan > /sys/kernel/debug/kmemleak
[  306.966708] kmemleak: 32 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
rapido1:/blktests# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff88001f86d000 (size 4096):
  comm "modprobe", pid 231, jiffies 4294892415 (age 318.252s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814b0379>] kmemleak_alloc+0x49/0xa0
    [<ffffffff810f180f>] kmem_cache_alloc+0x9f/0xe0
    [<ffffffff8124e45f>] badblocks_init+0x2f/0x60
    [<ffffffffa0019fae>] 0xffffffffa0019fae
    [<ffffffffa0021273>] nullb_device_badblocks_store+0x63/0x130 [null_blk]
    [<ffffffff810004cd>] do_one_initcall+0x3d/0x170
    [<ffffffff8109fe0d>] do_init_module+0x56/0x1e9
    [<ffffffff8109ebd7>] load_module+0x1c47/0x26a0
    [<ffffffff8109f819>] SyS_finit_module+0xa9/0xd0
    [<ffffffff814b4f60>] entry_SYSCALL_64_fastpath+0x13/0x94

Fixes: 2f54a613c942 ("nullb: badbblocks support")
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Add Loongson machine dependencies

[ Upstream commit 0d307935fefa6389eb726c6362351c162c949101 ]

The MIPS loongson cpufreq drivers don't build unless configured for the
correct machine type, due to dependency on machine specific architecture
headers and symbols in machine specific platform code.

More specifically loongson1-cpufreq.c uses RST_CPU_EN and RST_CPU,
neither of which is defined in asm/mach-loongson32/regs-clk.h unless
CONFIG_LOONGSON1_LS1B=y, and loongson2_cpufreq.c references
loongson2_clockmod_table[], which is only defined in
arch/mips/loongson64/lemote-2f/clock.c, i.e. when
CONFIG_LEMOTE_MACH2F=y.

Add these dependencies to Kconfig to avoid randconfig / allyesconfig
build failures (e.g. when based on BMIPS which also has a cpufreq
driver).

Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / bus: Leave modalias empty for devices which are not present

[ Upstream commit 10809bb976648ac58194a629e3d7af99e7400297 ]

Most Bay and Cherry Trail devices use a generic DSDT with all possible
peripheral devices present in the DSDT, with their _STA returning 0x00 or
0x0f based on AML variables which describe what is actually present on
the board.

Since ACPI device objects with a 0x00 status (not present) still get an
entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID
modalias, userspace would end up loading modules for non present hardware.

This commit fixes this by leaving the modalias empty for non present
devices. This results in 10 modules less being loaded with a generic
distro kernel config on my Cherry Trail test-device (a GPD pocket).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/zcrypt: Fix wrong comparison leading to strange load balancing

[ Upstream commit 0b0882672640ced4deeebf84da0b88b6389619c4 ]

The function to decide if one zcrypt queue is better than
another one compared two pointers instead of comparing the
values where the pointers refer to. So within the same
zcrypt card when load of each queue was equal just one queue
was used. This effect only appears on relatively lite load,
typically with one thread applications.

This patch fixes the wrong comparison and now the counters
show that requests are balanced equally over all available
queues within the cards.

There is no performance improvement coming with this fix.
As long as the queue depth for an APQN queue is not touched,
processing is not faster when requests are spread over
queues within the same card hardware. So this fix only
beautifies the lszcrypt counter printouts.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/topology: fix compile error in file arch/s390/kernel/smp.c

[ Upstream commit 38389ec84e835fa31a59b7dabb18343106a6d0d5 ]

Commit 1887aa07b676
("s390/topology: add detection of dedicated vs shared CPUs")
introduced following compiler error when CONFIG_SCHED_TOPOLOGY is not set.

CC arch/s390/kernel/smp.o
...
arch/s390/kernel/smp.c: In function ‘smp_start_secondary’:
arch/s390/kernel/smp.c:812:6: error: implicit declaration of function
‘topology_cpu_dedicated’; did you mean ‘topology_cpu_init’?

This patch fixes the compiler error by adding function
topology_cpu_dedicated() to return false when this config option is
not defined.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmet-fc: correct ref counting error when deferred rcv used

[ Upstream commit 619c62dcc62b957d17cccde2081cad527b020883 ]

Whenever a cmd is received a reference is taken while looking up the
queue. The reference is removed after the cmd is done as the iod is
returned for reuse. The fod may be reused for a deferred (recevied but
no job context) cmd. Existing code removes the reference only if the
fod is not reused for another command. Given the fod may be used for
one or more ios, although a reference was taken per io, it won't be
matched on the frees.

Remove the reference on every fod free. This pairs the references to
each io.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-pci: avoid hmb desc array idx out-of-bound when hmmaxd set.

[ Upstream commit 244a8fe40a09c218622eb9927b9090b0a9b73a1a ]

hmb descriptor idx out-of-bound occurs in case of below conditions.
preferred = 128MiB
chunk_size = 4MiB
hmmaxd = 1

Current code will not allow rmmod which will free hmb descriptors
to be done successfully in above case.

"descs[i]" will be set in for-loop without seeing any conditions
related to "max_entries" after a single "descs" was allocated by
(max_entries = 1) in this case.

Added a condition into for-loop to check index of descriptors.

Fixes: 044a9df1("nvme-pci: implement the HMB entry number and size limitations")
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-pci: disable APST on Samsung SSD 960 EVO + ASUS PRIME B350M-A

[ Upstream commit 8427bbc224863e14d905c87920d4005cb3e88ac3 ]

The NVMe device in question drops off the PCIe bus after system suspend.
I've tried several approaches to workaround this issue, but none of them
works:
- NVME_QUIRK_DELAY_BEFORE_CHK_RDY
- NVME_QUIRK_NO_DEEPEST_PS
- Disable APST before controller shutdown
- Delay between controller shutdown and system suspend
- Explicitly set power state to 0 before controller shutdown

Fortunately it's a desktop, so disable APST won't hurt the battery.

Also, change the quirk function name to reflect it's for vendor
combination quirks.

BugLink: https://bugs.launchpad.net/bugs/1705748
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-loop: check if queue is ready in queue_rq

[ Upstream commit 9d7fab04b95e8c26014a9bfc1c943b8360b44c17 ]

In case the queue is not LIVE (fully functional and connected at the nvmf
level), we cannot allow any commands other than connect to pass through.

Add a new queue state flag NVME_LOOP_Q_LIVE which is set after nvmf connect
and cleared in queue teardown.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-fc: check if queue is ready in queue_rq

[ Upstream commit 9e0ed16ab9a9aaf670b81c9cd05b5e50defed654 ]

In case the queue is not LIVE (fully functional and connected at the nvmf
level), we cannot allow any commands other than connect to pass through.

Add a new queue state flag NVME_FC_Q_LIVE which is set after nvmf connect
and cleared in queue teardown.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-fabrics: introduce init command check for a queue that is not alive

[ Upstream commit 48832f8d58cfedb2f9bee11bbfbb657efb42e7e7 ]

When the fabrics queue is not alive and fully functional, no commands
should be allowed to pass but connect (which moves the queue to a fully
functional state). Any other command should be failed, with either
temporary status BLK_STS_RESOUCE or permanent status BLK_STS_IOERR.

This is shared across all fabrics, hence move the check to fabrics
library.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2

[ Upstream commit 917dc6068bc12a2dafffcf0e9d405ddb1b8780cb ]

vmx_check_nested_events() should return -EBUSY only in case there is a
pending L1 event which requires a VMExit from L2 to L1 but such a
VMExit is currently blocked. Such VMExits are blocked either
because nested_run_pending=1 or an event was reinjected to L2.
vmx_check_nested_events() should return 0 in case there are no
pending L1 events which requires a VMExit from L2 to L1 or if
a VMExit from L2 to L1 was done internally.

However, upstream commit which introduced blocking in case an event was
reinjected to L2 (commit acc9ab601327 ("KVM: nVMX: Fix pending events
injection")) contains a bug: It returns -EBUSY even if there are no
pending L1 events which requires VMExit from L2 to L1.

This commit fix this issue.

Fixes: acc9ab601327 ("KVM: nVMX: Fix pending events injection")

Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: ioapic: Preserve read-only values in the redirection table

[ Upstream commit b200dded0a6974a3b69599832b2203483920ab25 ]

According to 82093AA (IOAPIC) manual, Remote IRR and Delivery Status are
read-only. QEMU implements the bits as RO in commit 479c2a1cb7fb
("ioapic: keep RO bits for IOAPIC entry").

Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered

[ Upstream commit a8bfec2930525808c01f038825d1df3904638631 ]

Some OSes (Linux, Xen) use this behavior to clear the Remote IRR bit for
IOAPICs without an EOI register. They simulate the EOI message manually
by changing the trigger mode to edge and then back to level, with the
entry being masked during this.

QEMU implements this feature in commit ed1263c363c9
("ioapic: clear remote irr bit for edge-triggered interrupts")

As a side effect, this commit removes an incorrect behavior where Remote
IRR was cleared when the redirection table entry was rewritten. This is not
consistent with the manual and also opens an opportunity for a strange
behavior when a redirection table entry is modified from an interrupt
handler that handles the same entry: The modification will clear the
Remote IRR bit even though the interrupt handler is still running.

Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race

[ Upstream commit 0fc5a36dd6b345eb0d251a65c236e53bead3eef7 ]

KVM uses ioapic_handled_vectors to track vectors that need to notify the
IOAPIC on EOI. The problem is that IOAPIC can be reconfigured while an
interrupt with old configuration is pending or running and
ioapic_handled_vectors only remembers the newest configuration;
thus EOI from the old interrupt is not delievered to the IOAPIC.

A previous commit db2bdcbbbd32
("KVM: x86: fix edge EOI and IOAPIC reconfig race")
addressed this issue by adding pending edge-triggered interrupts to
ioapic_handled_vectors, fixing this race for edge-triggered interrupts.
The commit explicitly ignored level-triggered interrupts,
but this race applies to them as well:

1) IOAPIC sends a level triggered interrupt vector to VCPU0
2) VCPU0's handler deasserts the irq line and reconfigures the IOAPIC
   to route the vector to VCPU1. The reconfiguration rewrites only the
   upper 32 bits of the IOREDTBLn register. (Causes KVM to update
   ioapic_handled_vectors for VCPU0 and it no longer includes the vector.)
3) VCPU0 sends EOI for the vector, but it's not delievered to the
   IOAPIC because the ioapic_handled_vectors doesn't include the vector.
4) New interrupts are not delievered to VCPU1 because remote_irr bit
   is set forever.

Therefore, the correct behavior is to add all pending and running
interrupts to ioapic_handled_vectors.

This commit introduces a slight performance hit similar to
commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race")
for the rare case that the vector is reused by a non-IOAPIC source on
VCPU0. We prefer to keep solution simple and not handle this case just
as the original commit does.

Fixes: db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race")

Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix em_fxstor() sleeping while in atomic

[ Upstream commit 4d772cb85f64c16eca00177089ecb3cd5d292120 ]

Commit 9d643f63128b ("KVM: x86: avoid large stack allocations in
em_fxrstor") optimize the stack size, but introduced a guest memory access
which might sleep while in atomic.

Fix it by introducing, again, a second fxregs_state. Try to avoid
large stacks by using noinline. Add some helpful comments.

Reported by syzbot:

in_atomic(): 1, irqs_disabled(): 0, pid: 2909, name: syzkaller879109
2 locks held by syzkaller879109/2909:
  #0:  (&vcpu->mutex){+.+.}, at: [<ffffffff8106222c>] vcpu_load+0x1c/0x70
arch/x86/kvm/../../../virt/kvm/kvm_main.c:154
  #1:  (&kvm->srcu){....}, at: [<ffffffff810dd162>] vcpu_enter_guest
arch/x86/kvm/x86.c:6983 [inline]
  #1:  (&kvm->srcu){....}, at: [<ffffffff810dd162>] vcpu_run
arch/x86/kvm/x86.c:7061 [inline]
  #1:  (&kvm->srcu){....}, at: [<ffffffff810dd162>]
kvm_arch_vcpu_ioctl_run+0x1bc2/0x58b0 arch/x86/kvm/x86.c:7222
CPU: 1 PID: 2909 Comm: syzkaller879109 Not tainted 4.13.0-rc4-next-20170811
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:16 [inline]
  dump_stack+0x194/0x257 lib/dump_stack.c:52
  ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6014
  __might_sleep+0x95/0x190 kernel/sched/core.c:5967
  __might_fault+0xab/0x1d0 mm/memory.c:4383
  __copy_from_user include/linux/uaccess.h:71 [inline]
  __kvm_read_guest_page+0x58/0xa0
arch/x86/kvm/../../../virt/kvm/kvm_main.c:1771
  kvm_vcpu_read_guest_page+0x44/0x60
arch/x86/kvm/../../../virt/kvm/kvm_main.c:1791
  kvm_read_guest_virt_helper+0x76/0x140 arch/x86/kvm/x86.c:4407
  kvm_read_guest_virt_system+0x3c/0x50 arch/x86/kvm/x86.c:4466
  segmented_read_std+0x10c/0x180 arch/x86/kvm/emulate.c:819
  em_fxrstor+0x27b/0x410 arch/x86/kvm/emulate.c:4022
  x86_emulate_insn+0x55d/0x3c50 arch/x86/kvm/emulate.c:5471
  x86_emulate_instruction+0x411/0x1ca0 arch/x86/kvm/x86.c:5698
  kvm_mmu_page_fault+0x18b/0x2c0 arch/x86/kvm/mmu.c:4854
  handle_ept_violation+0x1fc/0x5e0 arch/x86/kvm/vmx.c:6400
  vmx_handle_exit+0x281/0x1ab0 arch/x86/kvm/vmx.c:8718
  vcpu_enter_guest arch/x86/kvm/x86.c:6999 [inline]
  vcpu_run arch/x86/kvm/x86.c:7061 [inline]
  kvm_arch_vcpu_ioctl_run+0x1cee/0x58b0 arch/x86/kvm/x86.c:7222
  kvm_vcpu_ioctl+0x64c/0x1010 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2591
  vfs_ioctl fs/ioctl.c:45 [inline]
  do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
  SYSC_ioctl fs/ioctl.c:700 [inline]
  SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
  entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x437fc9
RSP: 002b:00007ffc7b4d5ab8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000437fc9
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000020ae8000
R10: 0000000000009120 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000000000004 R14: 0000000000000004 R15: 0000000020077000

Fixes: 9d643f63128b ("KVM: x86: avoid large stack allocations in em_fxrstor")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure

[ Upstream commit 5af4157388adad82c339e3742fb6b67840721347 ]

Commit 4f350c6dbcb (kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure
properly) can result in L1(run kvm-unit-tests/run_tests.sh vmx_controls in L1)
null pointer deference and also L0 calltrace when EPT=0 on both L0 and L1.

In L1:

BUG: unable to handle kernel paging request at ffffffffc015bf8f
IP: vmx_vcpu_run+0x202/0x510 [kvm_intel]
PGD 146e13067 P4D 146e13067 PUD 146e15067 PMD 3d2686067 PTE 3d4af9161
Oops: 0003 [#1] PREEMPT SMP
CPU: 2 PID: 1798 Comm: qemu-system-x86 Not tainted 4.14.0-rc4+ #6
RIP: 0010:vmx_vcpu_run+0x202/0x510 [kvm_intel]
Call Trace:
WARNING: kernel stack frame pointer at ffffb86f4988bc18 in qemu-system-x86:1798 has bad value 0000000000000002

In L0:

-----------[ cut here ]------------
WARNING: CPU: 6 PID: 4460 at /home/kernel/linux/arch/x86/kvm//vmx.c:9845 vmx_inject_page_fault_nested+0x130/0x140 [kvm_intel]
CPU: 6 PID: 4460 Comm: qemu-system-x86 Tainted: G           OE   4.14.0-rc7+ #25
RIP: 0010:vmx_inject_page_fault_nested+0x130/0x140 [kvm_intel]
Call Trace:
  paging64_page_fault+0x500/0xde0 [kvm]
  ? paging32_gva_to_gpa_nested+0x120/0x120 [kvm]
  ? nonpaging_page_fault+0x3b0/0x3b0 [kvm]
  ? __asan_storeN+0x12/0x20
  ? paging64_gva_to_gpa+0xb0/0x120 [kvm]
  ? paging64_walk_addr_generic+0x11a0/0x11a0 [kvm]
  ? lock_acquire+0x2c0/0x2c0
  ? vmx_read_guest_seg_ar+0x97/0x100 [kvm_intel]
  ? vmx_get_segment+0x2a6/0x310 [kvm_intel]
  ? sched_clock+0x1f/0x30
  ? check_chain_key+0x137/0x1e0
  ? __lock_acquire+0x83c/0x2420
  ? kvm_multiple_exception+0xf2/0x220 [kvm]
  ? debug_check_no_locks_freed+0x240/0x240
  ? debug_smp_processor_id+0x17/0x20
  ? __lock_is_held+0x9e/0x100
  kvm_mmu_page_fault+0x90/0x180 [kvm]
  kvm_handle_page_fault+0x15c/0x310 [kvm]
  ? __lock_is_held+0x9e/0x100
  handle_exception+0x3c7/0x4d0 [kvm_intel]
  vmx_handle_exit+0x103/0x1010 [kvm_intel]
  ? kvm_arch_vcpu_ioctl_run+0x1628/0x2e20 [kvm]

The commit avoids to load host state of vmcs12 as vmcs01's guest state
since vmcs12 is not modified (except for the VM-instruction error field)
if the checking of vmcs control area fails. However, the mmu context is
switched to nested mmu in prepare_vmcs02() and it will not be reloaded
since load_vmcs12_host_state() is skipped when nested VMLAUNCH/VMRESUME
fails. This patch fixes it by reloading mmu context when nested
VMLAUNCH/VMRESUME fails.

Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Fix operand/address-size during instruction decoding

[ Upstream commit 3853be2603191829b442b64dac6ae8ba0c027bf9 ]

Pedro reported:
  During tests that we conducted on KVM, we noticed that executing a "PUSH %ES"
  instruction under KVM produces different results on both memory and the SP
  register depending on whether EPT support is enabled. With EPT the SP is
  reduced by 4 bytes (and the written value is 0-padded) but without EPT support
  it is only reduced by 2 bytes. The difference can be observed when the CS.DB
  field is 1 (32-bit) but not when it's 0 (16-bit).

The internal segment descriptor cache exist even in real/vm8096 mode. The CS.D
also should be respected instead of just default operand/address-size/66H
prefix/67H prefix during instruction decoding. This patch fixes it by also
adjusting operand/address-size according to CS.D.

Reported-by: Pedro Fonseca <pfonseca@cs.washington.edu>
Tested-by: Pedro Fonseca <pfonseca@cs.washington.edu>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Pedro Fonseca <pfonseca@cs.washington.edu>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't re-execute instruction when not passing CR2 value

[ Upstream commit 9b8ae63798cb97e785a667ff27e43fa6220cb734 ]

In case of instruction-decode failure or emulation failure,
x86_emulate_instruction() will call reexecute_instruction() which will
attempt to use the cr2 value passed to x86_emulate_instruction().
However, when x86_emulate_instruction() is called from
emulate_instruction(), cr2 is not passed (passed as 0) and therefore
it doesn't make sense to execute reexecute_instruction() logic at all.

Fixes: 51d8b66199e9 ("KVM: cleanup emulate_instruction")

Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failure

[ Upstream commit 1f4dcb3b213235e642088709a1c54964d23365e9 ]

On this case, handle_emulation_failure() fills kvm_run with
internal-error information which it expects to be delivered
to user-mode for further processing.
However, the code reports a wrong return-value which makes KVM to never
return to user-mode on this scenario.

Fixes: 6d77dbfc88e3 ("KVM: inject #UD if instruction emulation fails and exit to
userspace")

Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX/nSVM: Don't intercept #UD when running L2

[ Upstream commit ac9b305caa0df6f5b75d294e4b86c1027648991e ]

When running L2, #UD should be intercepted by L1 or just forwarded
directly to L2. It should not reach L0 x86 emulator.
Therefore, set intercept for #UD only based on L1 exception-bitmap.

Also add WARN_ON_ONCE() on L0 #UD intercept handlers to make sure
it is never reached while running L2.

This improves commit ae1f57670703 ("KVM: nVMX: Do not emulate #UD while
in guest mode") by removing an unnecessary exit from L2 to L0 on #UD
when L1 doesn't intercept it.

In addition, SVM L0 #UD intercept handler doesn't handle correctly the
case it is raised from L2. In this case, it should forward the #UD to
guest instead of x86 emulator. As done in VMX #UD intercept handler.
This commit fixes this issue as-well.

Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupower : Fix cpupower working when cpu0 is offline

[ Upstream commit dbdc468f35ee827cab2753caa1c660bdb832243a ]

cpuidle_monitor used to assume that cpu0 is always online which is not
a valid assumption on POWER machines. This patch fixes this by getting
the cpu on which the current thread is running, instead of always using
cpu0 for monitoring which may not be online.

Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupowerutils: bench - Fix cpu online check

[ Upstream commit 53d1cd6b125fb9d69303516a1179ebc3b72f797a ]

cpupower_is_cpu_online was incorrectly checking for 0. This patch fixes
this by checking for 1 when the cpu is online.

Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: bail out gracefully rather than BUG_ON

[ Upstream commit 56a0e706fcf870270878d6d72b71092ae42d229c ]

If a file's DIR_ITEM key is invalid (due to memory errors) and gets
written to disk, a future lookup_path can end up with kernel panic due
to BUG_ON().

This gets rid of the BUG_ON(), meanwhile output the corrupted key and
return ENOENT if it's invalid.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reported-by: Guillaume Bouchard <bouchard@mercs-eng.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Fix transaction abort during failure in btrfs_rm_dev_item

[ Upstream commit 5e9f2ad5b2904a7e81df6d9a3dbef29478952eac ]

btrfs_rm_dev_item calls several function under an active transaction,
however it fails to abort it if an error happens. Fix this by adding
explicit btrfs_abort_transaction/btrfs_end_transaction calls.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Account for interrupts in flight

[ Upstream commit 253696ccd613fbdaa5aba1de44c461a058e0a114 ]

Synchronously disable the IRQ to make the following cancel_work_sync
invocation effective.

An interrupt in flight could enqueue further overflow mem work. As we
free the binner BO immediately following vc4_irq_uninstall this caused
a NULL pointer dereference in the work callback vc4_overflow_mem_work.

Link: https://github.com/anholt/linux/issues/114
Signed-off-by: Stefan Schake <stschake@gmail.com>
Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.")
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1510275907-993-2-git-send-email-stschake@gmail.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VFS: Handle lazytime in do_mount()

commit d7ee946942bdd12394809305e3df05aa4c8b7b8f upstream.

Since commit e462ec50cb5fa ("VFS: Differentiate mount flags (MS_*) from
internal superblock flags") the lazytime mount option doesn't get passed
on anymore.

Fix the issue by handling the option in do_mount().

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aacraid: Fix hang in kdump

commit c5313ae8e4e037bfaf5e56cb8d6efdb8e92ce437 upstream.

Driver attempts to perform a device scan and device add after coming out
of reset. At times when the kdump kernel loads and it tries to perform
eh recovery, the device scan hangs since its commands are blocked because
of the eh recovery. This should have shown up in normal eh recovery path
(Should have been obvious)

Remove the code that performs scanning.I can live without the rescanning
support in the stable kernels but a hanging kdump/eh recovery needs to be
fixed.

Fixes: a2d0321dd532901e (scsi: aacraid: Reload offlined drives after controller reset)
Reported-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Fixes: a2d0321dd532901e (scsi: aacraid: Reload offlined drives after controller reset)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aacraid: Fix udev inquiry race condition

commit f4e8708d3104437fd7716e957f38c265b0c509ef upstream.

When udev requests for a devices inquiry string, it might create multiple
threads causing a race condition on the shared inquiry resource string.

Created a buffer with the string for each thread.

Fixes: 3bc8070fb75b3315 ([SCSI] aacraid: SMC vendor identification)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima/policy: fix parsing of fsuuid

commit 36447456e1cca853188505f2a964dbbeacfc7a7a upstream.

The switch to uuid_t invereted the logic of verfication that &entry->fsuuid
is zero during parsing of "fsuuid=" rule. Instead of making sure the
&entry->fsuuid field is not attempted to be overwritten, we bail out for
perfectly correct rule.

Fixes: 787d8c530af7 ("ima/policy: switch to use uuid_t")
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: Free IRQs when device is hotplugged

commit 888f22931478a05bc81ceb7295c626e1292bf0ed upstream.

Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon
hotplugging my kernel would immediately crash due to igb:

[  680.825801] kernel BUG at drivers/pci/msi.c:352!
[  680.828388] invalid opcode: 0000 [#1] SMP
[  680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb]
[  680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G           O     4.15.0-rc3Lyude-Test+ #6
[  680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver. 01.03 06/09/2017
[  680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0
[  680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286
[  680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX: 000000000000002c
[  680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI: ffff880340be2178
[  680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09: ffff8803405f9c00
[  680.835342] R10: 0000000000000000 R11: 0000000000000040 R12: ffff88033d63a298
[  680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15: ffff880341959000
[  680.836332] FS:  0000000000000000(0000) GS:ffff88034f440000(0000) knlGS:0000000000000000
[  680.836817] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4: 00000000003606e0
[  680.837954] Call Trace:
[  680.838853]  pci_disable_msix+0xce/0xf0
[  680.839616]  igb_reset_interrupt_capability+0x5d/0x60 [igb]
[  680.840278]  igb_remove+0x9d/0x110 [igb]
[  680.840764]  pci_device_remove+0x36/0xb0
[  680.841279]  device_release_driver_internal+0x157/0x220
[  680.841739]  pci_stop_bus_device+0x7d/0xa0
[  680.842255]  pci_stop_bus_device+0x2b/0xa0
[  680.842722]  pci_stop_bus_device+0x3d/0xa0
[  680.843189]  pci_stop_and_remove_bus_device+0xe/0x20
[  680.843627]  trim_stale_devices+0xf3/0x140
[  680.844086]  trim_stale_devices+0x94/0x140
[  680.844532]  trim_stale_devices+0xa6/0x140
[  680.845031]  ? get_slot_status+0x90/0xc0
[  680.845536]  acpiphp_check_bridge.part.5+0xfe/0x140
[  680.846021]  acpiphp_hotplug_notify+0x175/0x200
[  680.846581]  ? free_bridge+0x100/0x100
[  680.847113]  acpi_device_hotplug+0x8a/0x490
[  680.847535]  acpi_hotplug_work_fn+0x1a/0x30
[  680.848076]  process_one_work+0x182/0x3a0
[  680.848543]  worker_thread+0x2e/0x380
[  680.848963]  ? process_one_work+0x3a0/0x3a0
[  680.849373]  kthread+0x111/0x130
[  680.849776]  ? kthread_create_worker_on_cpu+0x50/0x50
[  680.850188]  ret_from_fork+0x1f/0x30
[  680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b
[  680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0

As it turns out, normally the freeing of IRQs that would fix this is called
inside of the scope of __igb_close(). However, since the device is
already gone by the point we try to unregister the netdevice from the
driver due to a hotplug we end up seeing that the netif isn't present
and thus, forget to free any of the device IRQs.

So: make sure that if we're in the process of dismantling the netdev, we
always allow __igb_close() to be called so that IRQs may be freed
normally. Additionally, only allow igb_close() to be called from
__igb_close() if it hasn't already been called for the given adapter.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 9474933caf21 ("igb: close/suspend race in netif_device_detach")
Cc: Todd Fujinaka <todd.fujinaka@intel.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

commit d822401d1c6898a4a4ee03977b78b8cec402e88a upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE

commit 539340f37e6d6ed4cd93e8e18c9b2e4eafd4b842 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION is also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Acked-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

commit 97b03136e1b637d7a9d2274c099e44ecf23f1103 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o
see include/linux/module.h for more information

This adds the license as "GPL", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: reset: zx-reboot: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

commit 348c7cf5fcbcb68838255759d4cb45d039af36d2 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events

commit 403c0f681c1964ff1db8c2fb8de8c4067779d081 upstream.

Touch toggle softkeys send a '1' while pressed and a '0' while released,
requring the kernel to keep track of wether touch should be enabled or
disabled. The code does not handle the state transitions properly,
however. If the key is pressed repeatedly, the following four states
of states are cycled through (assuming touch starts out enabled):

Press: shared->is_touch_on => 0, SW_MUTE_DEVICE => 1
Release: shared->is_touch_on => 0, SW_MUTE_DEVICE => 1
Press: shared->is_touch_on => 1, SW_MUTE_DEVICE => 0
Release: shared->is_touch_on => 1, SW_MUTE_DEVICE => 1

The hardware always properly enables/disables touch when the key is
pressed but applications that listen for SW_MUTE_DEVICE events to provide
feedback about the state will only ever show touch as being enabled while
the key is held, and only every-other time. This sequence occurs because
the fallthrough WACOM_HID_WD_TOUCHONOFF case is always handled, and it
uses the value of the *local* is_touch_on variable as the value to
report to userspace. The local value is equal to the shared value when
the button is pressed, but equal to zero when the button is released.

Reporting the shared value to userspace fixes this problem, but the
fallthrough case needs to update the shared value in an incompatible
way (which is why the local variable was introduced in the first place).
To work around this, we just handle both cases in a single block of code
and update the shared variable as appropriate.

Fixes: d793ff8187 ("HID: wacom: generic: support touch on/off softkey")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com>
Tested-by: Aaron Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: EKR: ensure devres groups at higher indexes are released

commit 791ae273731fa85d3332e45064dab177ae663e80 upstream.

Background: ExpressKey Remotes communicate their events via usb dongle.
Each dongle can hold up to 5 pairings at one time and one EKR (identified
by its serial number) can unfortunately be paired with its dongle
more than once. The pairing takes place in a round-robin fashion.

Input devices are only created once per EKR, when a new serial number
is seen in the list of pairings. However, if a device is created for
a "higher" paring index and subsequently a second pairing occurs at a
lower pairing index, unpairing the remote with that serial number from
any pairing index will currently cause a driver crash. This occurs
infrequently, as two remotes are necessary to trigger this bug and most
users have only one remote.

As an illustration, to trigger the bug you need to have two remotes,
and pair them in this order:

1. slot 0 -> remote 1 (input device created for remote 1)
2. slot 1 -> remote 1 (duplicate pairing - no device created)
3. slot 2 -> remote 1 (duplicate pairing - no device created)
4. slot 3 -> remote 1 (duplicate pairing - no device created)
5. slot 4 -> remote 2 (input device created for remote 2)

6. slot 0 -> remote 2 (1 destroyed and recreated at slot 1)
7. slot 1 -> remote 2 (1 destroyed and recreated at slot 2)
8. slot 2 -> remote 2 (1 destroyed and recreated at slot 3)
9. slot 3 -> remote 2 (1 destroyed and not recreated)
10. slot 4 -> remote 2 (2 was already in this slot so no changes)

11. slot 0 -> remote 1 (The current code sees remote 2 was paired over in
                        one of the dongle slots it occupied and attempts
                        to remove all information about remote 2 [1]. It
                        calls wacom_remote_destroy_one for remote 2, but
                        the destroy function assumes the lowest index is
                        where the remote's input device was created. The
                        code "cleans up" the other remote 2 pairings
                        including the one which the input device was based
                        on, assuming they were were just duplicate
                        pairings. However, the cleanup doesn't call the
                        devres release function for the input device that
                        was created in slot 4).

This issue is fixed by this commit.

[1] Remote 2 should subsequently be re-created on the next packet from the
EKR at the lowest numbered slot that it occupies (here slot 1).

Fixes: f9036bd43602 ("HID: wacom: EKR: use devres groups to manage resources")
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: af_alg - whitelist mask and type

commit bb30b8848c85e18ca7e371d0a869e94b3e383bdf upstream.

The user space interface allows specifying the type and mask field used
to allocate the cipher. Only a subset of the possible flags are intended
for user space. Therefore, white-list the allowed flags.

In case the user space caller uses at least one non-allowed flag, EINVAL
is returned.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sha3-generic - fixes for alignment and big endian operation

commit c013cee99d5a18aec8c71fee8f5f41369cd12595 upstream.

Ensure that the input is byte swabbed before injecting it into the
SHA3 transform. Use the get_unaligned() accessor for this so that
we don't perform unaligned access inadvertently on architectures
that do not support that.

Fixes: 53964b9ee63b7075 ("crypto: sha3 - Add SHA-3 hash algorithm")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: inside-secure - avoid unmapping DMA memory that was not mapped

commit c957f8b3e2e54b29f53ef69decc87bbc858c9b58 upstream.

This patch adds a parameter in the SafeXcel ahash request structure to
keep track of the number of SG entries mapped. This allows not to call
dma_unmap_sg() when dma_map_sg() wasn't called in the first place. This
also removes a warning when the debugging of the DMA-API is enabled in
the kernel configuration: "DMA-API: device driver tries to free DMA
memory it has not allocated".

Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: inside-secure - fix hash when length is a multiple of a block

commit 809778e02cd45d0625439fee67688f655627bb3c upstream.

This patch fixes the hash support in the SafeXcel driver when the update
size is a multiple of a block size, and when a final call is made just
after with a size of 0. In such cases the driver should cache the last
block from the update to avoid handling 0 length data on the final call
(that's a hardware limitation).

Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: aesni - Fix out-of-bounds access of the AAD buffer in generic-gcm-aesni

commit 1ecdd37e308ca149dc378cce225068cbac54e3a6 upstream.

The aesni_gcm_enc/dec functions can access memory after the end of
the AAD buffer if the AAD length is not a multiple of 4 bytes.
It didn't matter with rfc4106-gcm-aesni as in that case the AAD was
always followed by the 8 byte IV, but that is no longer the case with
generic-gcm-aesni. This can potentially result in accessing a page that
is not mapped and thus causing the machine to crash. This patch fixes
that by reading the last <16 byte block of the AAD byte-by-byte and
optionally via an 8-byte load if the block was at least 8 bytes.

Fixes: 0487ccac ("crypto: aesni - make non-AVX AES-GCM work with any aadlen")
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: aesni - Fix out-of-bounds access of the data buffer in generic-gcm-aesni

commit b20209c91e23a9bbad9cac2f80bc16b3c259e10e upstream.

The aesni_gcm_enc/dec functions can access memory before the start of
the data buffer if the length of the data buffer is less than 16 bytes.
This is because they perform the read via a single 16-byte load. This
can potentially result in accessing a page that is not mapped and thus
causing the machine to crash. This patch fixes that by reading the
partial block byte-by-byte and optionally an via 8-byte load if the block
was at least 8 bytes.

Fixes: 0487ccac ("crypto: aesni - make non-AVX AES-GCM work with any aadlen")
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: aesni - add wrapper for generic gcm(aes)

commit fc8517bf627c9b834f80274a1bc9ecd39b27231b upstream.

When I added generic-gcm-aes I didn't add a wrapper like the one
provided for rfc4106(gcm(aes)). We need to add a cryptd wrapper to fall
back on in case the FPU is not available, otherwise we might corrupt the
FPU state.

Fixes: cce2ea8d90fe ("crypto: aesni - add generic gcm(aes)")
Reported-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: aesni - Use GCM IV size constant

commit 46d93748e5a3628f9f553832cd64d8a59d8bafde upstream.

This patch replace GCM IV size value by their constant name.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: gcm - add GCM IV size constant

commit ef780324592dd639e4bfbc5b9bf8934b234b7c99 upstream.

Many GCM users use directly GCM IV size instead of using some constant.

This patch add all IV size constant used by GCM.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: aesni - fix typo in generic_gcmaes_decrypt

commit 106840c41096a01079d3a2025225029c13713802 upstream.

generic_gcmaes_decrypt needs to use generic_gcmaes_ctx, not
aesni_rfc4106_gcm_ctx. This is actually harmless because the fields in
struct generic_gcmaes_ctx share the layout of the same fields in
aesni_rfc4106_gcm_ctx.

Fixes: cce2ea8d90fe ("crypto: aesni - add generic gcm(aes)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: aesni - handle zero length dst buffer

commit 9c674e1e2f9e24fa4392167efe343749008338e0 upstream.

GCM can be invoked with a zero destination buffer. This is possible if
the AAD and the ciphertext have zero lengths and only the tag exists in
the source buffer (i.e. a source buffer cannot be zero). In this case,
the GCM cipher only performs the authentication and no decryption
operation.

When the destination buffer has zero length, it is possible that no page
is mapped to the SG pointing to the destination. In this case,
sg_page(req->dst) is an invalid access. Therefore, page accesses should
only be allowed if the req->dst->length is non-zero which is the
indicator that a page must exist.

This fixes a crash that can be triggered by user space via AF_ALG.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ecdh - fix typo in KPP dependency of CRYPTO_ECDH

commit b5b9007730ce1d90deaf25d7f678511550744bdc upstream.

This fixes a typo in the CRYPTO_KPP dependency of CRYPTO_ECDH.

Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Reduce the suspend time consumption for ALC256

commit 1c9609e3a8cf5997bd35205cfda1ff2218ee793b upstream.

ALC256 has its own quirk to override the shutup call, and it contains
the COEF update for pulling down the headset jack control. Currently,
the COEF update is called after clearing the headphone pin, and this
seems triggering a stall of the codec communication, and results in a
long delay over a second at suspend.

A quick resolution is to swap the calls: at first with the COEF
update, then clear the headphone pin.

Fixes: 4a219ef8f370 ("ALSA: hda/realtek - Add ALC256 HP depop function")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198503
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: Fix kernel stack leak to userspace

commit 24bd3efc9d1efb5f756a7c6f807a36ddb6adc671 upstream.

The GPIO event descriptor was leaking kernel stack to
userspace because we don't zero the variable before
use. Ooops. Fix this.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: stmpe: i2c transfer are forbiden in atomic context

commit b888fb6f2a278442933e3bfab70262e9a5365fb3 upstream.

Move the workaround from stmpe_gpio_irq_unmask() which is executed
in atomic context to stmpe_gpio_irq_sync_unlock() which is not.

It fixes the following issue:

[    1.500000] BUG: scheduling while atomic: swapper/1/0x00000002
[    1.500000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc2-00020-gbd4301f-dirty #28
[    1.520000] Hardware name: STM32 (Device Tree Support)
[    1.520000] [<0000bfc9>] (unwind_backtrace) from [<0000b347>] (show_stack+0xb/0xc)
[    1.530000] [<0000b347>] (show_stack) from [<0001fc49>] (__schedule_bug+0x39/0x58)
[    1.530000] [<0001fc49>] (__schedule_bug) from [<00168211>] (__schedule+0x23/0x2b2)
[    1.550000] [<00168211>] (__schedule) from [<001684f7>] (schedule+0x57/0x64)
[    1.550000] [<001684f7>] (schedule) from [<0016a513>] (schedule_timeout+0x137/0x164)
[    1.550000] [<0016a513>] (schedule_timeout) from [<00168b91>] (wait_for_common+0x8d/0xfc)
[    1.570000] [<00168b91>] (wait_for_common) from [<00139753>] (stm32f4_i2c_xfer+0xe9/0xfe)
[    1.580000] [<00139753>] (stm32f4_i2c_xfer) from [<00138545>] (__i2c_transfer+0x111/0x148)
[    1.590000] [<00138545>] (__i2c_transfer) from [<001385cf>] (i2c_transfer+0x53/0x70)
[    1.590000] [<001385cf>] (i2c_transfer) from [<001388a5>] (i2c_smbus_xfer+0x12f/0x36e)
[    1.600000] [<001388a5>] (i2c_smbus_xfer) from [<00138b49>] (i2c_smbus_read_byte_data+0x1f/0x2a)
[    1.610000] [<00138b49>] (i2c_smbus_read_byte_data) from [<00124fdd>] (__stmpe_reg_read+0xd/0x24)
[    1.620000] [<00124fdd>] (__stmpe_reg_read) from [<001252b3>] (stmpe_reg_read+0x19/0x24)
[    1.630000] [<001252b3>] (stmpe_reg_read) from [<0002c4d1>] (unmask_irq+0x17/0x22)
[    1.640000] [<0002c4d1>] (unmask_irq) from [<0002c57f>] (irq_startup+0x6f/0x78)
[    1.650000] [<0002c57f>] (irq_startup) from [<0002b7a1>] (__setup_irq+0x319/0x47c)
[    1.650000] [<0002b7a1>] (__setup_irq) from [<0002bad3>] (request_threaded_irq+0x6b/0xe8)
[    1.660000] [<0002bad3>] (request_threaded_irq) from [<0002d0b9>] (devm_request_threaded_irq+0x3b/0x6a)
[    1.670000] [<0002d0b9>] (devm_request_threaded_irq) from [<001446e7>] (mmc_gpiod_request_cd_irq+0x49/0x8a)
[    1.680000] [<001446e7>] (mmc_gpiod_request_cd_irq) from [<0013d45d>] (mmc_start_host+0x49/0x60)
[    1.690000] [<0013d45d>] (mmc_start_host) from [<0013e40b>] (mmc_add_host+0x3b/0x54)
[    1.700000] [<0013e40b>] (mmc_add_host) from [<00148119>] (mmci_probe+0x4d1/0x60c)
[    1.710000] [<00148119>] (mmci_probe) from [<000f903b>] (amba_probe+0x7b/0xbe)
[    1.720000] [<000f903b>] (amba_probe) from [<001170e5>] (driver_probe_device+0x169/0x1f8)
[    1.730000] [<001170e5>] (driver_probe_device) from [<001171b7>] (__driver_attach+0x43/0x5c)
[    1.740000] [<001171b7>] (__driver_attach) from [<0011618d>] (bus_for_each_dev+0x3d/0x46)
[    1.740000] [<0011618d>] (bus_for_each_dev) from [<001165cd>] (bus_add_driver+0xcd/0x124)
[    1.740000] [<001165cd>] (bus_add_driver) from [<00117713>] (driver_register+0x4d/0x7a)
[    1.760000] [<00117713>] (driver_register) from [<001fc765>] (do_one_initcall+0xbd/0xe8)
[    1.770000] [<001fc765>] (do_one_initcall) from [<001fc88b>] (kernel_init_freeable+0xfb/0x134)
[    1.780000] [<001fc88b>] (kernel_init_freeable) from [<00167ee3>] (kernel_init+0x7/0x9c)
[    1.790000] [<00167ee3>] (kernel_init) from [<00009b65>] (ret_from_fork+0x11/0x2c)

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/gpio: Fix build error with musl libc

commit 1696784eb7b52b13b62d160c028ef2c2c981d4f2 upstream.

The GPIO tools build fails when using a buildroot toolchain that uses musl
as it's C library:

arm-broomstick-linux-musleabi-gcc -Wp,-MD,./.gpio-event-mon.o.d \
-Wp,-MT,gpio-event-mon.o -O2 -Wall -g -D_GNU_SOURCE \
-Iinclude -D"BUILD_STR(s)=#s" -c -o gpio-event-mon.o gpio-event-mon.c
gpio-event-mon.c:30:6: error: unknown type name ‘u_int32_t’; did you mean ‘uint32_t’?
      u_int32_t handleflags,
      ^~~~~~~~~
      uint32_t

The glibc headers installed on my laptop include sys/types.h in
unistd.h, but it appears that musl does not.

Fixes: 97f69747d8b1 ("tools/gpio: add the gpio-event-mon tool")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Fix CPUID function for word 6 (80000001_ECX)

commit 50a671d4d15b859f447fa527191073019b6ce9cb upstream.

The function for CPUID 80000001 ECX is set to 0xc0000001. Set it to
0x80000001.

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Fixes: d6321d493319 ("KVM: x86: generalize guest_cpuid_has_ helpers")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: fix concurrent lo_open/lo_release

commit ae6650163c66a7eff1acd6eb8b0f752dcfa8eba5 upstream.

范龙飞 reports that KASAN can report a use-after-free in __lock_acquire.
The reason is due to insufficient serialization in lo_release(), which
will continue to use the loop device even after it has decremented the
lo_refcnt to zero.

In the meantime, another process can come in, open the loop device
again as it is being shut down. Confusion ensues.

Reported-by: 范龙飞 <long7573@126.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Fix OWNER_DEAD fixup

commit a97cb0e7b3f4c6297fd857055ae8e895f402f501 upstream.

Both Geert and DaveJ reported that the recent futex commit:

c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex")

introduced a problem with setting OWNER_DEAD. We set the bit on an
uninitialized variable and then entirely optimize it away as a
dead-store.

Move the setting of the bit to where it is more useful.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex")
Link: http://lkml.kernel.org/r/20180122103947.GD2228@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ozkan Sezer <sezeroz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.16

nfsd: auth: Fix gid sorting when rootsquash enabled

commit 1995266727fa8143897e89b55f5d3c79aa828420 upstream.

Commit bdcf0a423ea1 ("kernel: make groups_sort calling a responsibility
group_info allocators") appears to break nfsd rootsquash in a pretty
major way.

It adds a call to groups_sort() inside the loop that copies/squashes
gids, which means the valid gids are sorted along with the following
garbage. The net result is that the highest numbered valid gids are
replaced with any lower-valued garbage gids, possibly including 0.

We should sort only once, after filling in all the gids.

Fixes: bdcf0a423ea1 ("kernel: make groups_sort calling a responsibility ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: governor: Ensure sufficiently large sampling intervals

commit 56026645e2b6f11ede34a5e6ab69d3eb56f9c8fc upstream.

After commit aa7519af450d (cpufreq: Use transition_delay_us for legacy
governors as well) the sampling_rate field of struct dbs_data may be
less than the tick period which causes dbs_update() to produce
incorrect results, so make the code ensure that the value of that
field will always be sufficiently large.

Fixes: aa7519af450d (cpufreq: Use transition_delay_us for legacy governors as well)
Reported-by: Andy Tang <andy.tang@nxp.com>
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Andy Tang <andy.tang@nxp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, arm64: fix stack_depth tracking in combination with tail calls

[ upstream commit a2284d912bfc865cdca4c00488e08a3550f9a405 ]

Using dynamic stack_depth tracking in arm64 JIT is currently broken in
combination with tail calls. In prologue, we cache ctx->stack_size and
adjust SP reg for setting up function call stack, and tearing it down
again in epilogue. Problem is that when doing a tail call, the cached
ctx->stack_size might not be the same.

One way to fix the problem with minimal overhead is to re-adjust SP in
emit_bpf_tail_call() and properly adjust it to the current program's
ctx->stack_size. Tested on Cavium ThunderX ARMv8.

Fixes: f1c9eed7f437 ("bpf, arm64: take advantage of stack_depth tracking")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: reject stores into ctx via st and xadd

[ upstream commit f37a8cb84cce18762e8f86a70bd6a49a66ab964c ]

Alexei found that verifier does not reject stores into context
via BPF_ST instead of BPF_STX. And while looking at it, we
also should not allow XADD variant of BPF_STX.

The context rewriter is only assuming either BPF_LDX_MEM- or
BPF_STX_MEM-type operations, thus reject anything other than
that so that assumptions in the rewriter properly hold. Add
test cases as well for BPF selftests.

Fixes: d691f9e8d440 ("bpf: allow programs to write to certain skb fields")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix 32-bit divide by zero

[ upstream commit 68fda450a7df51cff9e5a4d4a4d9d0d5f2589153 ]

due to some JITs doing if (src_reg == 0) check in 64-bit mode
for div/mod operations mask upper 32-bits of src register
before doing the check

Fixes: 622582786c9e ("net: filter: x86: internal BPF JIT")
Fixes: 7a12b5031c6b ("sparc64: Add eBPF JIT.")
Reported-by: syzbot+48340bb518e88849e2e3@syzkaller.appspotmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix divides by zero

[ upstream commit c366287ebd698ef5e3de300d90cd62ee9ee7373e ]

Divides by zero are not nice, lets avoid them if possible.

Also do_div() seems not needed when dealing with 32bit operands,
but this seems a minor detail.

Fixes: bd4cf0ed331a ("net: filter: rework/optimize internal BPF interpreter's instruction set")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: avoid false sharing of map refcount with max_entries

[ upstream commit be95a845cc4402272994ce290e3ad928aff06cb9 ]

In addition to commit b2157399cc98 ("bpf: prevent out-of-bounds
speculation") also change the layout of struct bpf_map such that
false sharing of fast-path members like max_entries is avoided
when the maps reference counter is altered. Therefore enforce
them to be placed into separate cachelines.

pahole dump after change:

  struct bpf_map {
        const struct bpf_map_ops  * ops;                 /*     0     8 */
        struct bpf_map *           inner_map_meta;       /*     8     8 */
        void *                     security;             /*    16     8 */
        enum bpf_map_type          map_type;             /*    24     4 */
        u32                        key_size;             /*    28     4 */
        u32                        value_size;           /*    32     4 */
        u32                        max_entries;          /*    36     4 */
        u32                        map_flags;            /*    40     4 */
        u32                        pages;                /*    44     4 */
        u32                        id;                   /*    48     4 */
        int                        numa_node;            /*    52     4 */
        bool                       unpriv_array;         /*    56     1 */

        /* XXX 7 bytes hole, try to pack */

        /* --- cacheline 1 boundary (64 bytes) --- */
        struct user_struct *       user;                 /*    64     8 */
        atomic_t                   refcnt;               /*    72     4 */
        atomic_t                   usercnt;              /*    76     4 */
        struct work_struct         work;                 /*    80    32 */
        char                       name[16];             /*   112    16 */
        /* --- cacheline 2 boundary (128 bytes) --- */

        /* size: 128, cachelines: 2, members: 17 */
        /* sum members: 121, holes: 1, sum holes: 7 */
  };

Now all entries in the first cacheline are read only throughout
the life time of the map, set up once during map creation. Overall
struct size and number of cachelines doesn't change from the
reordering. struct bpf_map is usually first member and embedded
in map structs in specific map implementations, so also avoid those
members to sit at the end where it could potentially share the
cacheline with first map values e.g. in the array since remote
CPUs could trigger map updates just as well for those (easily
dirtying members like max_entries intentionally as well) while
having subsequent values in cache.

Quoting from Google's Project Zero blog [1]:

  Additionally, at least on the Intel machine on which this was
  tested, bouncing modified cache lines between cores is slow,
  apparently because the MESI protocol is used for cache coherence
  [8]. Changing the reference counter of an eBPF array on one
  physical CPU core causes the cache line containing the reference
  counter to be bounced over to that CPU core, making reads of the
  reference counter on all other CPU cores slow until the changed
  reference counter has been written back to memory. Because the
  length and the reference counter of an eBPF array are stored in
  the same cache line, this also means that changing the reference
  counter on one physical CPU core causes reads of the eBPF array's
  length to be slow on other physical CPU cores (intentional false
  sharing).

While this doesn't 'control' the out-of-bounds speculation through
masking the index as in commit b2157399cc98, triggering a manipulation
of the map's reference counter is really trivial, so lets not allow
to easily affect max_entries from it.

Splitting to separate cachelines also generally makes sense from
a performance perspective anyway in that fast-path won't have a
cache miss if the map gets pinned, reused in other progs, etc out
of control path, thus also avoids unintentional false sharing.

  [1] https://googleprojectzero.blogspot.ch/2018/01/reading-privileged-memory-with-side.html

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: introduce BPF_JIT_ALWAYS_ON config

[ upstream commit 290af86629b25ffd1ed6232c4e9107da031705cb ]

The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715.

A quote from goolge project zero blog:
"At this point, it would normally be necessary to locate gadgets in
the host kernel code that can be used to actually leak data by reading
from an attacker-controlled location, shifting and masking the result
appropriately and then using the result of that as offset to an
attacker-controlled address for a load. But piecing gadgets together
and figuring out which ones work in a speculation context seems annoying.
So instead, we decided to use the eBPF interpreter, which is built into
the host kernel - while there is no legitimate way to invoke it from inside
a VM, the presence of the code in the host kernel's text section is sufficient
to make it usable for the attack, just like with ordinary ROP gadgets."

To make attacker job harder introduce BPF_JIT_ALWAYS_ON config
option that removes interpreter from the kernel in favor of JIT-only mode.
So far eBPF JIT is supported by:
x64, arm64, arm32, sparc64, s390, powerpc64, mips64

The start of JITed program is randomized and code page is marked as read-only.
In addition "constant blinding" can be turned on with net.core.bpf_jit_harden

v2->v3:
- move __bpf_prog_ret0 under ifdef (Daniel)

v1->v2:
- fix init order, test_bpf and cBPF (Daniel's feedback)
- fix offloaded bpf (Jakub's feedback)
- add 'return 0' dummy in case something can invoke prog->bpf_func
- retarget bpf tree. For bpf-next the patch would need one extra hunk.
It will be sent when the trees are merged back to net-next

Considered doing:
int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT;
but it seems better to land the patch as-is and in bpf-next remove
bpf_jit_enable global variable from all JITs, consolidate in one place
and remove this jit_init() function.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hrtimer: Reset hrtimer cpu base proper on CPU hotplug

commit d5421ea43d30701e03cadc56a38854c36a8b4433 upstream.

The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.

If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.

Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.

Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.

Fixes: 41d2e4949377 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems

commit 5beda7d54eafece4c974cfa9fbb9f60fb18fd20a upstream.

Neil Berrington reported a double-fault on a VM with 768GB of RAM that uses
large amounts of vmalloc space with PTI enabled.

The cause is that load_new_mm_cr3() was never fixed to take the 5-level pgd
folding code into account, so, on a 4-level kernel, the pgd synchronization
logic compiles away to exactly nothing.

Interestingly, the problem doesn't trigger with nopti.  I assume this is
because the kernel is mapped with global pages if we boot with nopti.  The
sequence of operations when we create a new task is that we first load its
mm while still running on the old stack (which crashes if the old stack is
unmapped in the new mm unless the TLB saves us), then we call
prepare_switch_to(), and then we switch to the new stack.
prepare_switch_to() pokes the new stack directly, which will populate the
mapping through vmalloc_fault().  I assume that we're getting lucky on
non-PTI systems -- the old stack's TLB entry stays alive long enough to
make it all the way through prepare_switch_to() and switch_to() so that we
make it to a valid stack.

Fixes: b50858ce3e2a ("x86/mm/vmalloc: Add 5-level paging support")
Reported-and-tested-by: Neil Berrington <neil.berrington@datacore.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/346541c56caed61abbe693d7d2742b4a380c5001.1516914529.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode: Fix again accessing initrd after having been freed

commit 1d080f096fe33f031d26e19b3ef0146f66b8b0f1 upstream.

Commit 24c2503255d3 ("x86/microcode: Do not access the initrd after it has
been freed") fixed attempts to access initrd from the microcode loader
after it has been freed. However, a similar KASAN warning was reported
(stack trace edited):

  smpboot: Booting Node 0 Processor 1 APIC 0x11
  ==================================================================
  BUG: KASAN: use-after-free in find_cpio_data+0x9b5/0xa50
  Read of size 1 at addr ffff880035ffd000 by task swapper/1/0

  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.8-slack #7
  Hardware name: System manufacturer System Product Name/A88X-PLUS, BIOS 3003 03/10/2016
  Call Trace:
   dump_stack
   print_address_description
   kasan_report
   ? find_cpio_data
   __asan_report_load1_noabort
   find_cpio_data
   find_microcode_in_initrd
   __load_ucode_amd
   load_ucode_amd_ap
      load_ucode_ap

After some investigation, it turned out that a merge was done using the
wrong side to resolve, leading to picking up the previous state, before
the 24c2503255d3 fix. Therefore the Fixes tag below contains a merge
commit.

Revert the mismerge by catching the save_microcode_in_initrd_amd()
retval and thus letting the function exit with the last return statement
so that initrd_gone can be set to true.

Fixes: f26483eaedec ("Merge branch 'x86/urgent' into x86/microcode, to resolve conflicts")
Reported-by: <higuita@gmx.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198295
Link: https://lkml.kernel.org/r/20180123104133.918-2-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/intel: Extend BDW late-loading further with LLC size check

commit 7e702d17ed138cf4ae7c00e8c00681ed464587c7 upstream.

Commit b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a
revision check") reduced the impact of erratum BDF90 for Broadwell model
79.

The impact can be reduced further by checking the size of the last level
cache portion per core.

Tony: "The erratum says the problem only occurs on the large-cache SKUs.
So we only need to avoid the update if we are on a big cache SKU that is
also running old microcode."

For more details, see erratum BDF90 in document #334165 (Intel Xeon
Processor E7-8800/4800 v4 Product Family Specification Update) from
September 2017.

Fixes: b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a revision check")
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1516321542-31161-1-git-send-email-zhang.jia@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/amd/power: Do not load AMD power module on !AMD platforms

commit 40d4071ce2d20840d224b4a77b5dc6f752c9ab15 upstream.

The AMD power module can be loaded on non AMD platforms, but unload fails
with the following Oops:

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: __list_del_entry_valid+0x29/0x90
Call Trace:
  perf_pmu_unregister+0x25/0xf0
  amd_power_pmu_exit+0x1c/0xd23 [power]
  SyS_delete_module+0x1a8/0x2b0
  ? exit_to_usermode_loop+0x8f/0xb0
  entry_SYSCALL_64_fastpath+0x20/0x83

Return -ENODEV instead of 0 from the module init function if the CPU does
not match.

Fixes: c7ab62bfbe0e ("perf/x86/amd/power: Add AMD accumulated power reporting mechanism")
Signed-off-by: Xiao Liang <xiliang@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180122061252.6394-1-xiliang@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmxnet3: repair memory leak

[ Upstream commit 848b159835ddef99cc4193083f7e786c3992f580 ]

with the introduction of commit
b0eb57cb97e7837ebb746404c2c58c6f536f23fa, it appears that rq->buf_info
is improperly handled. While it is heap allocated when an rx queue is
setup, and freed when torn down, an old line of code in
vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0]
being set to NULL prior to its being freed, causing a memory leak, which
eventually exhausts the system on repeated create/destroy operations
(for example, when the mtu of a vmxnet3 interface is changed
frequently.

Fix is pretty straight forward, just move the NULL set to after the
free.

Tested by myself with successful results

Applies to net, and should likely be queued for stable, please

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-By: boyang@redhat.com
CC: boyang@redhat.com
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: David S. Miller <davem@davemloft.net>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: Make "ip route get" match iif lo rules again.

[ Upstream commit 6503a30440962f1e1ccb8868816b4e18201218d4 ]

Commit 3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu
versions of route lookup") broke "ip route get" in the presence
of rules that specify iif lo.

Host-originated traffic always has iif lo, because
ip_route_output_key_hash and ip6_route_output_flags set the flow
iif to LOOPBACK_IFINDEX. Thus, putting "iif lo" in an ip rule is a
convenient way to select only originated traffic and not forwarded
traffic.

inet_rtm_getroute used to match these rules correctly because
even though it sets the flow iif to 0, it called
ip_route_output_key which overwrites iif with LOOPBACK_IFINDEX.
But now that it calls ip_route_output_key_hash_rcu, the ifindex
will remain 0 and not match the iif lo in the rule. As a result,
"ip route get" will return ENETUNREACH.

Fixes: 3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Tested: https://android.googlesource.com/kernel/tests/+/master/net/test/multinetwork_test.py passes again
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tls: reset crypto_info when do_tls_setsockopt_tx fails

[ Upstream commit 6db959c82eb039a151d95a0f8b7dea643657327a ]

The current code copies directly from userspace to ctx->crypto_send, but
doesn't always reinitialize it to 0 on failure. This causes any
subsequent attempt to use this setsockopt to fail because of the
TLS_CRYPTO_INFO_READY check, eventhough crypto_info is not actually
ready.

This should result in a correctly set up socket after the 3rd call, but
currently it does not:

    size_t s = sizeof(struct tls12_crypto_info_aes_gcm_128);
    struct tls12_crypto_info_aes_gcm_128 crypto_good = {
        .info.version = TLS_1_2_VERSION,
        .info.cipher_type = TLS_CIPHER_AES_GCM_128,
    };

    struct tls12_crypto_info_aes_gcm_128 crypto_bad_type = crypto_good;
    crypto_bad_type.info.cipher_type = 42;

    setsockopt(sock, SOL_TLS, TLS_TX, &crypto_bad_type, s);
    setsockopt(sock, SOL_TLS, TLS_TX, &crypto_good, s - 1);
    setsockopt(sock, SOL_TLS, TLS_TX, &crypto_good, s);

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tls: return -EBUSY if crypto_info is already set

[ Upstream commit 877d17c79b66466942a836403773276e34fe3614 ]

do_tls_setsockopt_tx returns 0 without doing anything when crypto_info
is already set. Silent failure is confusing for users.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tls: fix sw_ctx leak

[ Upstream commit cf6d43ef66f416282121f436ce1bee9a25199d52 ]

During setsockopt(SOL_TCP, TLS_TX), if initialization of the software
context fails in tls_set_sw_offload(), we leak sw_ctx. We also don't
reassign ctx->priv_ctx to NULL, so we can't even do another attempt to
set it up on the same socket, as it will fail with -EEXIST.

Fixes: 3c4d7559159b ('tls: kernel TLS support')
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: Only attach to sockets in ESTABLISHED state

[ Upstream commit d91c3e17f75f218022140dee18cf515292184a8f ]

Calling accept on a TCP socket with a TLS ulp attached results
in two sockets that share the same ulp context.
The ulp context is freed while a socket is destroyed, so
after one of the sockets is released, the second second will
trigger a use after free when it tries to access the ulp context
attached to it.
We restrict the TLS ulp to sockets in ESTABLISHED state
to prevent the scenario above.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Reported-by: syzbot+904e7cd6c5c741609228@syzkaller.appspotmail.com
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: reset extack earlier in netlink_rcv_skb

[ Upstream commit cd443f1e91ca600a092e780e8250cd6a2954b763 ]

Move up the extack reset/initialization in netlink_rcv_skb, so that
those 'goto ack' will not skip it. Otherwise, later on netlink_ack
may use the uninitialized extack and cause kernel crash.

Fixes: cbbdf8433a5f ("netlink: extack needs to be reset each time through loop")
Reported-by: syzbot+03bee3680a37466775e7@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>