1 # SOME DESCRIPTIVE TITLE
2 # Copyright (C) YEAR Free Software Foundation, Inc.
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
8 "Project-Id-Version: PACKAGE VERSION\n"
9 "POT-Creation-Date: 2013-08-15 19:32+0900\n"
10 "PO-Revision-Date: 2013-08-16 12:12+0900\n"
11 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
12 "Language-Team: LANGUAGE <LL@li.org>\n"
15 "Content-Type: text/plain; charset=UTF-8\n"
16 "Content-Transfer-Encoding: 8bit\n"
19 #: build/C/man3/MB_CUR_MAX.3:17
25 #: build/C/man3/MB_CUR_MAX.3:17 build/C/man3/MB_LEN_MAX.3:17
31 #: build/C/man3/MB_CUR_MAX.3:17 build/C/man3/MB_LEN_MAX.3:17
32 #: build/C/man2/_exit.2:29 build/C/man3/atexit.3:33 build/C/man3/clearenv.3:26
33 #: build/C/man3/exit.3:29 build/C/man3/getloadavg.3:34
34 #: build/C/man3/strtod.3:45
40 #: build/C/man3/MB_CUR_MAX.3:17 build/C/man3/MB_LEN_MAX.3:17
41 #: build/C/man2/_exit.2:29 build/C/man3/a64l.3:9 build/C/man3/atexit.3:33
42 #: build/C/man3/atof.3:31 build/C/man3/atoi.3:33
43 #: build/C/man3/canonicalize_file_name.3:26 build/C/man3/cfree.3:24
44 #: build/C/man3/clearenv.3:26 build/C/man3/drand48.3:30
45 #: build/C/man3/drand48_r.3:27 build/C/man3/ecvt.3:32 build/C/man3/ecvt_r.3:30
46 #: build/C/man3/exit.3:29 build/C/man3/gcvt.3:30 build/C/man3/getauxval.3:27
47 #: build/C/man3/getenv.3:33 build/C/man3/getloadavg.3:34
48 #: build/C/man3/getsubopt.3:25 build/C/man3/malloc.3:30
49 #: build/C/man3/mblen.3:16 build/C/man3/mbstowcs.3:16 build/C/man3/mbtowc.3:16
50 #: build/C/man3/mkdtemp.3:26 build/C/man3/mkstemp.3:35
51 #: build/C/man3/mktemp.3:34 build/C/man3/on_exit.3:31 build/C/man3/putenv.3:36
52 #: build/C/man3/qecvt.3:28 build/C/man3/rand.3:41 build/C/man3/random.3:33
53 #: build/C/man3/random_r.3:26 build/C/man3/rpmatch.3:29
54 #: build/C/man3/setenv.3:37 build/C/man3/strtod.3:45
55 #: build/C/man3/strtoimax.3:24 build/C/man3/strtol.3:31
56 #: build/C/man3/strtoul.3:33 build/C/man3/system.3:30
57 #: build/C/man3/wcstombs.3:16 build/C/man3/wctomb.3:16
59 msgid "Linux Programmer's Manual"
60 msgstr "Linux Programmer's Manual"
63 #: build/C/man3/MB_CUR_MAX.3:18 build/C/man3/MB_LEN_MAX.3:18
64 #: build/C/man2/_exit.2:30 build/C/man3/a64l.3:10 build/C/man3/atexit.3:34
65 #: build/C/man3/atof.3:32 build/C/man3/atoi.3:34
66 #: build/C/man3/canonicalize_file_name.3:27 build/C/man3/cfree.3:25
67 #: build/C/man3/clearenv.3:27 build/C/man3/drand48.3:31
68 #: build/C/man3/drand48_r.3:28 build/C/man3/ecvt.3:33 build/C/man3/ecvt_r.3:31
69 #: build/C/man3/exit.3:30 build/C/man3/gcvt.3:31 build/C/man3/getauxval.3:28
70 #: build/C/man3/getenv.3:34 build/C/man3/getloadavg.3:35
71 #: build/C/man3/getsubopt.3:26 build/C/man3/malloc.3:31
72 #: build/C/man3/mblen.3:17 build/C/man3/mbstowcs.3:17 build/C/man3/mbtowc.3:17
73 #: build/C/man3/mkdtemp.3:27 build/C/man3/mkstemp.3:36
74 #: build/C/man3/mktemp.3:35 build/C/man3/on_exit.3:32 build/C/man3/putenv.3:37
75 #: build/C/man3/qecvt.3:29 build/C/man3/rand.3:42 build/C/man3/random.3:34
76 #: build/C/man3/random_r.3:27 build/C/man3/rpmatch.3:30
77 #: build/C/man3/setenv.3:38 build/C/man3/strtod.3:46
78 #: build/C/man3/strtoimax.3:25 build/C/man3/strtol.3:32
79 #: build/C/man3/strtoul.3:34 build/C/man3/system.3:31
80 #: build/C/man3/wcstombs.3:17 build/C/man3/wctomb.3:17
86 #: build/C/man3/MB_CUR_MAX.3:20
88 "MB_CUR_MAX - maximum length of a multibyte character in the current locale"
89 msgstr "MB_CUR_MAX - 現在のロケールでのマルチバイト文字の最大長"
92 #: build/C/man3/MB_CUR_MAX.3:20 build/C/man3/MB_LEN_MAX.3:20
93 #: build/C/man2/_exit.2:32 build/C/man3/a64l.3:12 build/C/man3/atexit.3:36
94 #: build/C/man3/atof.3:34 build/C/man3/atoi.3:36
95 #: build/C/man3/canonicalize_file_name.3:29 build/C/man3/cfree.3:27
96 #: build/C/man3/clearenv.3:29 build/C/man3/drand48.3:34
97 #: build/C/man3/drand48_r.3:32 build/C/man3/ecvt.3:35 build/C/man3/ecvt_r.3:33
98 #: build/C/man3/exit.3:32 build/C/man3/gcvt.3:33 build/C/man3/getauxval.3:30
99 #: build/C/man3/getenv.3:36 build/C/man3/getloadavg.3:37
100 #: build/C/man3/getsubopt.3:28 build/C/man3/malloc.3:33
101 #: build/C/man3/mblen.3:19 build/C/man3/mbstowcs.3:19 build/C/man3/mbtowc.3:19
102 #: build/C/man3/mkdtemp.3:29 build/C/man3/mkstemp.3:38
103 #: build/C/man3/mktemp.3:37 build/C/man3/on_exit.3:34 build/C/man3/putenv.3:39
104 #: build/C/man3/qecvt.3:31 build/C/man3/rand.3:44 build/C/man3/random.3:36
105 #: build/C/man3/random_r.3:30 build/C/man3/rpmatch.3:32
106 #: build/C/man3/setenv.3:40 build/C/man3/strtod.3:48
107 #: build/C/man3/strtoimax.3:27 build/C/man3/strtol.3:34
108 #: build/C/man3/strtoul.3:36 build/C/man3/system.3:33
109 #: build/C/man3/wcstombs.3:19 build/C/man3/wctomb.3:19
115 #: build/C/man3/MB_CUR_MAX.3:23 build/C/man3/atexit.3:39
116 #: build/C/man3/atof.3:37 build/C/man3/atoi.3:39 build/C/man3/cfree.3:31
117 #: build/C/man3/clearenv.3:32 build/C/man3/drand48.3:37
118 #: build/C/man3/drand48_r.3:35 build/C/man3/ecvt_r.3:36 build/C/man3/exit.3:35
119 #: build/C/man3/gcvt.3:36 build/C/man3/getenv.3:39 build/C/man3/malloc.3:36
120 #: build/C/man3/mblen.3:22 build/C/man3/mbstowcs.3:22 build/C/man3/mbtowc.3:22
121 #: build/C/man3/mkdtemp.3:32 build/C/man3/mkstemp.3:41
122 #: build/C/man3/mktemp.3:40 build/C/man3/on_exit.3:37 build/C/man3/putenv.3:42
123 #: build/C/man3/rand.3:47 build/C/man3/random.3:39 build/C/man3/random_r.3:33
124 #: build/C/man3/rpmatch.3:35 build/C/man3/setenv.3:43 build/C/man3/strtol.3:37
125 #: build/C/man3/strtoul.3:39 build/C/man3/system.3:36
126 #: build/C/man3/wcstombs.3:22 build/C/man3/wctomb.3:22
128 msgid "B<#include E<lt>stdlib.hE<gt>>\n"
129 msgstr "B<#include E<lt>stdlib.hE<gt>>\n"
132 #: build/C/man3/MB_CUR_MAX.3:24 build/C/man3/MB_LEN_MAX.3:24
133 #: build/C/man2/_exit.2:56 build/C/man3/a64l.3:33 build/C/man3/atexit.3:42
134 #: build/C/man3/atof.3:40 build/C/man3/atoi.3:64
135 #: build/C/man3/canonicalize_file_name.3:35 build/C/man3/cfree.3:52
136 #: build/C/man3/clearenv.3:43 build/C/man3/drand48.3:75
137 #: build/C/man3/drand48_r.3:83 build/C/man3/ecvt.3:69 build/C/man3/ecvt_r.3:64
138 #: build/C/man3/exit.3:38 build/C/man3/gcvt.3:64 build/C/man3/getauxval.3:36
139 #: build/C/man3/getenv.3:52 build/C/man3/getloadavg.3:44
140 #: build/C/man3/getsubopt.3:50 build/C/man3/malloc.3:42
141 #: build/C/man3/mblen.3:25 build/C/man3/mbstowcs.3:25 build/C/man3/mbtowc.3:25
142 #: build/C/man3/mkdtemp.3:55 build/C/man3/mkstemp.3:76
143 #: build/C/man3/mktemp.3:66 build/C/man3/on_exit.3:48 build/C/man3/putenv.3:54
144 #: build/C/man3/qecvt.3:53 build/C/man3/rand.3:62 build/C/man3/random.3:64
145 #: build/C/man3/random_r.3:58 build/C/man3/rpmatch.3:46
146 #: build/C/man3/setenv.3:61 build/C/man3/strtod.3:73
147 #: build/C/man3/strtoimax.3:35 build/C/man3/strtol.3:59
148 #: build/C/man3/strtoul.3:62 build/C/man3/system.3:39
149 #: build/C/man3/wcstombs.3:25 build/C/man3/wctomb.3:25
155 #: build/C/man3/MB_CUR_MAX.3:31
157 "The B<MB_CUR_MAX> macro defines an integer expression giving the maximum "
158 "number of bytes needed to represent a single wide character in the current "
159 "locale. It is locale dependent and therefore not a compile-time constant."
161 "B<MB_CUR_MAX> マクロは、現在のロケールで一つのワイド文字を表現するために必要"
162 "な 最大バイト数を表す整数表現を定義する。 これはロケール依存であり、コンパイ"
166 #: build/C/man3/MB_CUR_MAX.3:31 build/C/man3/MB_LEN_MAX.3:29
167 #: build/C/man2/_exit.2:79 build/C/man3/atexit.3:71 build/C/man3/atof.3:55
168 #: build/C/man3/atoi.3:91 build/C/man3/canonicalize_file_name.3:61
169 #: build/C/man3/cfree.3:96 build/C/man3/clearenv.3:50
170 #: build/C/man3/drand48_r.3:96 build/C/man3/ecvt.3:99 build/C/man3/ecvt_r.3:86
171 #: build/C/man3/exit.3:86 build/C/man3/gcvt.3:72 build/C/man3/getauxval.3:171
172 #: build/C/man3/getenv.3:88 build/C/man3/getloadavg.3:55
173 #: build/C/man3/getsubopt.3:110 build/C/man3/malloc.3:129
174 #: build/C/man3/mblen.3:75 build/C/man3/mbstowcs.3:83 build/C/man3/mbtowc.3:94
175 #: build/C/man3/mkdtemp.3:68 build/C/man3/mkstemp.3:136
176 #: build/C/man3/mktemp.3:77 build/C/man3/on_exit.3:76 build/C/man3/putenv.3:67
177 #: build/C/man3/rand.3:118 build/C/man3/random.3:118
178 #: build/C/man3/random_r.3:100 build/C/man3/rpmatch.3:73
179 #: build/C/man3/setenv.3:104 build/C/man3/strtod.3:128
180 #: build/C/man3/strtoimax.3:45 build/C/man3/strtol.3:117
181 #: build/C/man3/strtoul.3:127 build/C/man3/system.3:54
182 #: build/C/man3/wcstombs.3:79 build/C/man3/wctomb.3:63
188 #: build/C/man3/MB_CUR_MAX.3:35
190 "An integer in the range [1, B<MB_LEN_MAX>]. The value 1 denotes traditional "
191 "8-bit encoded characters."
193 "[1, B<MB_LEN_MAX>] の範囲の整数を返す。 1 という値は伝統的な (traditional) 8-"
194 "bit エンコードされた文字を意味する。"
197 #: build/C/man3/MB_CUR_MAX.3:35 build/C/man3/MB_LEN_MAX.3:31
198 #: build/C/man2/_exit.2:81 build/C/man3/a64l.3:71 build/C/man3/atexit.3:76
199 #: build/C/man3/atof.3:57 build/C/man3/atoi.3:93
200 #: build/C/man3/canonicalize_file_name.3:73 build/C/man3/cfree.3:112
201 #: build/C/man3/clearenv.3:60 build/C/man3/drand48.3:260
202 #: build/C/man3/drand48_r.3:98 build/C/man3/ecvt.3:117
203 #: build/C/man3/ecvt_r.3:88 build/C/man3/exit.3:90 build/C/man3/gcvt.3:77
204 #: build/C/man3/getauxval.3:185 build/C/man3/getenv.3:96
205 #: build/C/man3/getloadavg.3:65 build/C/man3/getsubopt.3:129
206 #: build/C/man3/malloc.3:168 build/C/man3/mblen.3:92
207 #: build/C/man3/mbstowcs.3:93 build/C/man3/mbtowc.3:114
208 #: build/C/man3/mkdtemp.3:86 build/C/man3/mkstemp.3:176
209 #: build/C/man3/mktemp.3:92 build/C/man3/on_exit.3:81 build/C/man3/putenv.3:79
210 #: build/C/man3/qecvt.3:83 build/C/man3/rand.3:129 build/C/man3/random.3:152
211 #: build/C/man3/random_r.3:128 build/C/man3/rpmatch.3:99
212 #: build/C/man3/setenv.3:127 build/C/man3/strtod.3:160
213 #: build/C/man3/strtoimax.3:58 build/C/man3/strtol.3:161
214 #: build/C/man3/strtoul.3:165 build/C/man3/system.3:78
215 #: build/C/man3/wcstombs.3:88 build/C/man3/wctomb.3:84
217 msgid "CONFORMING TO"
221 #: build/C/man3/MB_CUR_MAX.3:37 build/C/man3/MB_LEN_MAX.3:33
222 #: build/C/man3/strtoimax.3:60
223 msgid "C99, POSIX.1-2001."
224 msgstr "C99, POSIX.1-2001."
227 #: build/C/man3/MB_CUR_MAX.3:37 build/C/man3/MB_LEN_MAX.3:44
228 #: build/C/man2/_exit.2:124 build/C/man3/a64l.3:93 build/C/man3/atexit.3:161
229 #: build/C/man3/atof.3:59 build/C/man3/atoi.3:113
230 #: build/C/man3/canonicalize_file_name.3:75 build/C/man3/cfree.3:117
231 #: build/C/man3/clearenv.3:97 build/C/man3/drand48.3:266
232 #: build/C/man3/drand48_r.3:100 build/C/man3/ecvt.3:135
233 #: build/C/man3/ecvt_r.3:95 build/C/man3/exit.3:177 build/C/man3/gcvt.3:86
234 #: build/C/man3/getauxval.3:211 build/C/man3/getenv.3:129
235 #: build/C/man3/getloadavg.3:69 build/C/man3/getsubopt.3:226
236 #: build/C/man3/malloc.3:259 build/C/man3/mblen.3:106
237 #: build/C/man3/mbstowcs.3:107 build/C/man3/mbtowc.3:129
238 #: build/C/man3/mkdtemp.3:91 build/C/man3/mkstemp.3:214
239 #: build/C/man3/mktemp.3:115 build/C/man3/on_exit.3:88
240 #: build/C/man3/putenv.3:119 build/C/man3/qecvt.3:94 build/C/man3/rand.3:217
241 #: build/C/man3/random.3:188 build/C/man3/random_r.3:132
242 #: build/C/man3/rpmatch.3:144 build/C/man3/setenv.3:152
243 #: build/C/man3/strtod.3:179 build/C/man3/strtoimax.3:60
244 #: build/C/man3/strtol.3:285 build/C/man3/strtoul.3:213
245 #: build/C/man3/system.3:153 build/C/man3/wcstombs.3:102
246 #: build/C/man3/wctomb.3:99
252 #: build/C/man3/MB_CUR_MAX.3:44
254 "B<MB_LEN_MAX>(3), B<mblen>(3), B<mbstowcs>(3), B<mbtowc>(3), B<wcstombs>(3), "
257 "B<MB_LEN_MAX>(3), B<mblen>(3), B<mbstowcs>(3), B<mbtowc>(3), B<wcstombs>(3), "
261 #: build/C/man3/MB_CUR_MAX.3:44 build/C/man3/MB_LEN_MAX.3:46
262 #: build/C/man2/_exit.2:136 build/C/man3/a64l.3:97 build/C/man3/atexit.3:165
263 #: build/C/man3/atof.3:65 build/C/man3/atoi.3:118
264 #: build/C/man3/canonicalize_file_name.3:78 build/C/man3/cfree.3:119
265 #: build/C/man3/clearenv.3:103 build/C/man3/drand48.3:269
266 #: build/C/man3/drand48_r.3:104 build/C/man3/ecvt.3:141
267 #: build/C/man3/ecvt_r.3:99 build/C/man3/exit.3:184 build/C/man3/gcvt.3:90
268 #: build/C/man3/getauxval.3:217 build/C/man3/getenv.3:137
269 #: build/C/man3/getloadavg.3:72 build/C/man3/getsubopt.3:228
270 #: build/C/man3/malloc.3:283 build/C/man3/mblen.3:108
271 #: build/C/man3/mbstowcs.3:110 build/C/man3/mbtowc.3:133
272 #: build/C/man3/mkdtemp.3:98 build/C/man3/mkstemp.3:220
273 #: build/C/man3/mktemp.3:120 build/C/man3/on_exit.3:92
274 #: build/C/man3/putenv.3:125 build/C/man3/qecvt.3:99 build/C/man3/rand.3:220
275 #: build/C/man3/random.3:193 build/C/man3/random_r.3:136
276 #: build/C/man3/rpmatch.3:150 build/C/man3/setenv.3:157
277 #: build/C/man3/strtod.3:185 build/C/man3/strtoimax.3:66
278 #: build/C/man3/strtol.3:291 build/C/man3/strtoul.3:219
279 #: build/C/man3/system.3:158 build/C/man3/wcstombs.3:105
280 #: build/C/man3/wctomb.3:103
286 #: build/C/man3/MB_CUR_MAX.3:51 build/C/man3/MB_LEN_MAX.3:53
287 #: build/C/man2/_exit.2:143 build/C/man3/a64l.3:104 build/C/man3/atexit.3:172
288 #: build/C/man3/atof.3:72 build/C/man3/atoi.3:125
289 #: build/C/man3/canonicalize_file_name.3:85 build/C/man3/cfree.3:126
290 #: build/C/man3/clearenv.3:110 build/C/man3/drand48.3:276
291 #: build/C/man3/drand48_r.3:111 build/C/man3/ecvt.3:148
292 #: build/C/man3/ecvt_r.3:106 build/C/man3/exit.3:191 build/C/man3/gcvt.3:97
293 #: build/C/man3/getauxval.3:224 build/C/man3/getenv.3:144
294 #: build/C/man3/getloadavg.3:79 build/C/man3/getsubopt.3:235
295 #: build/C/man3/malloc.3:290 build/C/man3/mblen.3:115
296 #: build/C/man3/mbstowcs.3:117 build/C/man3/mbtowc.3:140
297 #: build/C/man3/mkdtemp.3:105 build/C/man3/mkstemp.3:227
298 #: build/C/man3/mktemp.3:127 build/C/man3/on_exit.3:99
299 #: build/C/man3/putenv.3:132 build/C/man3/qecvt.3:106 build/C/man3/rand.3:227
300 #: build/C/man3/random.3:200 build/C/man3/random_r.3:143
301 #: build/C/man3/rpmatch.3:157 build/C/man3/setenv.3:164
302 #: build/C/man3/strtod.3:192 build/C/man3/strtoimax.3:73
303 #: build/C/man3/strtol.3:298 build/C/man3/strtoul.3:226
304 #: build/C/man3/system.3:165 build/C/man3/wcstombs.3:112
305 #: build/C/man3/wctomb.3:110
307 "This page is part of release 3.53 of the Linux I<man-pages> project. A "
308 "description of the project, and information about reporting bugs, can be "
309 "found at \\%http://www.kernel.org/doc/man-pages/."
311 "この man ページは Linux I<man-pages> プロジェクトのリリース 3.53 の一部\n"
312 "である。プロジェクトの説明とバグ報告に関する情報は\n"
313 "http://www.kernel.org/doc/man-pages/ に書かれている。"
316 #: build/C/man3/MB_LEN_MAX.3:17
322 #: build/C/man3/MB_LEN_MAX.3:20
323 msgid "MB_LEN_MAX - maximum multibyte length of a character across all locales"
324 msgstr "MB_LEN_MAX - 全てのロケールでの1文字の最大マルチバイト長"
327 #: build/C/man3/MB_LEN_MAX.3:23
329 msgid "B<#include E<lt>limits.hE<gt>>\n"
330 msgstr "B<#include E<lt>limits.hE<gt>>\n"
333 #: build/C/man3/MB_LEN_MAX.3:29
335 "The B<MB_LEN_MAX> macro is the upper bound for the number of bytes needed to "
336 "represent a single wide character, across all locales."
338 "B<MB_LEN_MAX> マクロは、全てのロケールで一つのワイド文字を表現するために必要"
342 #: build/C/man3/MB_LEN_MAX.3:31
343 msgid "A constant integer greater than zero."
344 msgstr "0 より大きいの整数型の定数。"
347 #: build/C/man3/MB_LEN_MAX.3:33 build/C/man2/_exit.2:86 build/C/man3/a64l.3:73
348 #: build/C/man3/atexit.3:78 build/C/man3/atoi.3:103 build/C/man3/clearenv.3:74
349 #: build/C/man3/drand48.3:262 build/C/man3/ecvt.3:129 build/C/man3/ecvt_r.3:90
350 #: build/C/man3/exit.3:92 build/C/man3/getauxval.3:187
351 #: build/C/man3/getenv.3:102 build/C/man3/getsubopt.3:131
352 #: build/C/man3/malloc.3:170 build/C/man3/mblen.3:94
353 #: build/C/man3/mbstowcs.3:95 build/C/man3/mbtowc.3:116
354 #: build/C/man3/mkstemp.3:189 build/C/man3/mktemp.3:96
355 #: build/C/man3/putenv.3:81 build/C/man3/qecvt.3:89 build/C/man3/rand.3:141
356 #: build/C/man3/random.3:154 build/C/man3/setenv.3:129
357 #: build/C/man3/strtod.3:165 build/C/man3/strtol.3:166
358 #: build/C/man3/strtoul.3:170 build/C/man3/system.3:80
359 #: build/C/man3/wcstombs.3:90 build/C/man3/wctomb.3:86
365 #: build/C/man3/MB_LEN_MAX.3:44
367 "The entities B<MB_LEN_MAX> and I<sizeof(wchar_t)> are totally unrelated. In "
368 "glibc, B<MB_LEN_MAX> is typically 6 while I<sizeof(wchar_t)> is 4."
370 "B<MB_LEN_MAX> と I<sizeof(wchar_t)> の値にはなんの関係もない。 glibc では "
371 "B<MB_LEN_MAX> は通常は 6 で、 I<sizeof(wchar_t)> は 4 である。"
374 #: build/C/man3/MB_LEN_MAX.3:46
375 msgid "B<MB_CUR_MAX>(3)"
376 msgstr "B<MB_CUR_MAX>(3)"
379 #: build/C/man2/_exit.2:29
385 #: build/C/man2/_exit.2:29 build/C/man3/gcvt.3:30 build/C/man3/strtod.3:45
391 #: build/C/man2/_exit.2:32
392 msgid "_exit, _Exit - terminate the calling process"
393 msgstr "_exit, _Exit - 呼び出し元のプロセスを終了させる"
396 #: build/C/man2/_exit.2:34
397 msgid "B<#include E<lt>unistd.hE<gt>>"
398 msgstr "B<#include E<lt>unistd.hE<gt>>"
401 #: build/C/man2/_exit.2:36
402 msgid "B<void _exit(int >I<status>B<);>"
403 msgstr "B<void _exit(int >I<status>B<);>"
406 #: build/C/man2/_exit.2:38 build/C/man3/a64l.3:14
407 #: build/C/man3/canonicalize_file_name.3:33 build/C/man3/ecvt.3:37
408 #: build/C/man3/getsubopt.3:30 build/C/man3/qecvt.3:33
409 #: build/C/man3/strtod.3:50
410 msgid "B<#include E<lt>stdlib.hE<gt>>"
411 msgstr "B<#include E<lt>stdlib.hE<gt>>"
414 #: build/C/man2/_exit.2:40
415 msgid "B<void _Exit(int >I<status>B<);>"
416 msgstr "B<void _Exit(int >I<status>B<);>"
419 #: build/C/man2/_exit.2:44 build/C/man3/a64l.3:22 build/C/man3/atoi.3:52
420 #: build/C/man3/cfree.3:48 build/C/man3/clearenv.3:39
421 #: build/C/man3/drand48.3:60 build/C/man3/drand48_r.3:68
422 #: build/C/man3/ecvt.3:47 build/C/man3/ecvt_r.3:53 build/C/man3/gcvt.3:43
423 #: build/C/man3/getenv.3:48 build/C/man3/getsubopt.3:37
424 #: build/C/man3/mkdtemp.3:39 build/C/man3/mkstemp.3:54
425 #: build/C/man3/mktemp.3:47 build/C/man3/on_exit.3:44 build/C/man3/putenv.3:50
426 #: build/C/man3/qecvt.3:45 build/C/man3/rand.3:58 build/C/man3/random.3:52
427 #: build/C/man3/random_r.3:47 build/C/man3/rpmatch.3:42
428 #: build/C/man3/setenv.3:52 build/C/man3/strtod.3:60 build/C/man3/strtol.3:47
429 #: build/C/man3/strtoul.3:50
431 "Feature Test Macro Requirements for glibc (see B<feature_test_macros>(7)):"
432 msgstr "glibc 向けの機能検査マクロの要件 (B<feature_test_macros>(7) 参照):"
435 #: build/C/man2/_exit.2:48
440 #: build/C/man2/_exit.2:51 build/C/man3/strtod.3:68
442 "_XOPEN_SOURCE\\ E<gt>=\\ 600 || _ISOC99_SOURCE || _POSIX_C_SOURCE\\ E<gt>=\\ "
445 "_XOPEN_SOURCE\\ E<gt>=\\ 600 || _ISOC99_SOURCE || _POSIX_C_SOURCE\\ E<gt>=\\ "
449 #: build/C/man2/_exit.2:54 build/C/man3/atoi.3:62 build/C/man3/strtod.3:71
450 #: build/C/man3/strtol.3:57 build/C/man3/strtoul.3:60
451 msgid "or I<cc\\ -std=c99>"
452 msgstr "または I<cc\\ -std=c99>"
455 #: build/C/man2/_exit.2:67
457 "The function B<_exit>() terminates the calling process \"immediately\". "
458 "Any open file descriptors belonging to the process are closed; any children "
459 "of the process are inherited by process 1, I<init>, and the process's parent "
460 "is sent a B<SIGCHLD> signal."
462 "B<_exit>() は、それを呼んだプロセスを「直ちに」終了させる。 その際、このプロ"
463 "セスが所有しているディスクリプタ (descriptor) で、 オープンされているものは全"
464 "てクローズされる。 また、このプロセスが所有する子プロセスは全て、プロセス番"
465 "号 1、 つまり I<init> プロセスによって継承され、このプロセスの親プロセスに対"
466 "して B<SIGCHLD> シグナルが送出される。"
469 #: build/C/man2/_exit.2:74
471 "The value I<status> is returned to the parent process as the process's exit "
472 "status, and can be collected using one of the B<wait>(2) family of calls."
474 "I<status> の値は、このプロセスの終了状態としてその親プロセスに対して返され、 "
475 "B<wait>(2) 系関数を利用することによって取得することができる。"
478 #: build/C/man2/_exit.2:79
479 msgid "The function B<_Exit>() is equivalent to B<_exit>()."
480 msgstr "関数 B<_Exit>() は B<_exit>() と等価である。"
483 #: build/C/man2/_exit.2:81
484 msgid "These functions do not return."
485 msgstr "これらの関数は値を返さない。"
488 #: build/C/man2/_exit.2:86
490 "SVr4, POSIX.1-2001, 4.3BSD. The function B<_Exit>() was introduced by C99."
491 msgstr "SVr4, POSIX.1-2001, 4.3BSD. 関数 B<_Exit>() は C99 で導入された。"
494 #: build/C/man2/_exit.2:90
496 "For a discussion on the effects of an exit, the transmission of exit status, "
497 "zombie processes, signals sent, and so on, see B<exit>(3)."
499 "exit の効果、終了状態の受渡し、ゾンビプロセス、シグナル送出などに\n"
500 "ついての議論は、 B<exit>(3) を参照すること。"
503 #: build/C/man2/_exit.2:117
505 "The function B<_exit>() is like B<exit>(3), but does not call any functions "
506 "registered with B<atexit>(3) or B<on_exit>(3). Whether it flushes standard "
507 "I/O buffers and removes temporary files created with B<tmpfile>(3) is "
508 "implementation-dependent. On the other hand, B<_exit>() does close open "
509 "file descriptors, and this may cause an unknown delay, waiting for pending "
510 "output to finish. If the delay is undesired, it may be useful to call "
511 "functions like B<tcflush>(3) before calling B<_exit>(). Whether any "
512 "pending I/O is canceled, and which pending I/O may be canceled upon B<_exit>"
513 "(), is implementation-dependent."
515 "関数 B<_exit>() は B<exit>(3) に似ているが、ANSI C の B<atexit>(3) や "
516 "B<on_exit>(3) によって登録されたいかなる関数も呼び出さない。 標準 I/O バッ"
517 "ファのフラッシュや、 B<tmpfile>(3) で作成されたテンポラリファイルの削除を行"
518 "うかどうかは、実装に依存する。 一方で、 B<_exit>() はオープンされているファ"
519 "イルディスクリプタをクローズしないため、 未決定になっている出力がフラッシュさ"
520 "れるのを待つのに不確定な遅れが発生する。 この遅れを発生させたくなければ、 "
521 "B<_exit>() の前に B<tcflush>(3) のような関数を呼び出せばよい。 B<_exit>() "
522 "が呼び出されたときに、 未決定になっている全ての I/O がキャンセルされるのか、 "
523 "またどの I/O がキャンセルされるのかは実装に依存する。"
526 #: build/C/man2/_exit.2:124
528 "In glibc up to version 2.3, the B<_exit>() wrapper function invoked the "
529 "kernel system call of the same name. Since glibc 2.3, the wrapper function "
530 "invokes B<exit_group>(2), in order to terminate all of the threads in a "
533 "バージョン 2.3 より前の glibc では、 B<_exit>() のラッパー関数は同じ名前の"
534 "カーネル・システムコールを起動していた。 glibc 2.3 以降では、プロセス内の全て"
535 "のスレッドを終了するために、 ラッパー関数は B<exit_group>(2) を起動する。"
538 #: build/C/man2/_exit.2:136
540 "B<execve>(2), B<exit_group>(2), B<fork>(2), B<kill>(2), B<wait>(2), B<wait4>"
541 "(2), B<waitpid>(2), B<atexit>(3), B<exit>(3), B<on_exit>(3), B<termios>(3)"
543 "B<execve>(2), B<exit_group>(2), B<fork>(2), B<kill>(2), B<wait>(2), B<wait4>"
544 "(2), B<waitpid>(2), B<atexit>(3), B<exit>(3), B<on_exit>(3), B<termios>(3)"
547 #: build/C/man3/a64l.3:9
553 #: build/C/man3/a64l.3:9 build/C/man3/drand48.3:30 build/C/man3/mblen.3:16
559 #: build/C/man3/a64l.3:12
560 msgid "a64l, l64a - convert between long and base-64"
561 msgstr "a64l, l64a - long と base-64 を変換する"
564 #: build/C/man3/a64l.3:16
565 msgid "B<long a64l(char *>I<str64>B<);>"
566 msgstr "B<long a64l(char *>I<str64>B<);>"
569 #: build/C/man3/a64l.3:18
570 msgid "B<char *l64a(long >I<value>B<);>"
571 msgstr "B<char *l64a(long >I<value>B<);>"
574 #: build/C/man3/a64l.3:26
575 msgid "B<a64l>(), B<l64a>():"
576 msgstr "B<a64l>(), B<l64a>():"
579 #: build/C/man3/a64l.3:31 build/C/man3/ecvt.3:66
581 "_SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || _XOPEN_SOURCE\\ &&\\ "
582 "_XOPEN_SOURCE_EXTENDED"
584 "_SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || _XOPEN_SOURCE\\ &&\\ "
585 "_XOPEN_SOURCE_EXTENDED"
588 #: build/C/man3/a64l.3:48
590 "These functions provide a conversion between 32-bit long integers and little-"
591 "endian base-64 ASCII strings (of length zero to six). If the string used as "
592 "argument for B<a64l>() has length greater than six, only the first six "
593 "bytes are used. If the type I<long> has more than 32 bits, then B<l64a>() "
594 "uses only the low order 32 bits of I<value>, and B<a64l>() sign-extends its "
597 "これらの関数は 32 ビット long 整数と リトルエンディアン base-64 ASCII 文字列 "
598 "(長さ 0 〜 6) の間の変換を行う。 B<a64l>() の引き数の文字列が 7 文字以上の場"
599 "合、 最初の 6 バイトが使われる。 I<long> 型が 32 ビットより大きい場合、 "
600 "B<l64a>() は I<value> の下位 32 ビットのみを使い、 B<a64l>() は 32 ビットの"
601 "結果を符号拡張 (sign-extend) する。"
604 #: build/C/man3/a64l.3:50
605 msgid "The 64 digits in the base-64 system are:"
606 msgstr "base-64 システムで使われる 64 個の文字は以下の通りである:"
609 #: build/C/man3/a64l.3:58
612 "\\&\\(aq.\\(aq\trepresents a 0\n"
613 "\\&\\(aq/\\(aq\trepresents a 1\n"
614 "0-9\trepresent 2-11\n"
615 "A-Z\trepresent 12-37\n"
616 "a-z\trepresent 38-63\n"
618 "\\&\\(aq.\\(aq\tは 0 を表す。\n"
619 "\\&\\(aq/\\(aq\tは 1 を表す。\n"
621 "A-Z\tは 12-37 を表す。\n"
622 "a-z\tは 38-63 を表す。\n"
625 #: build/C/man3/a64l.3:62
626 msgid "So 123 = 59*64^0 + 1*64^1 = \"v/\"."
627 msgstr "よって 123 = 59*64^0 + 1*64^1 = \"v/\" である。"
630 #: build/C/man3/a64l.3:62 build/C/man3/drand48.3:245 build/C/man3/ecvt.3:110
631 #: build/C/man3/mblen.3:87 build/C/man3/qecvt.3:72
637 #: build/C/man3/a64l.3:63 build/C/man3/drand48.3:246 build/C/man3/ecvt.3:111
638 #: build/C/man3/mblen.3:88 build/C/man3/qecvt.3:73
640 msgid "Multithreading (see pthreads(7))"
641 msgstr "マルチスレッディング (pthreads(7) 参照)"
644 #: build/C/man3/a64l.3:67
645 msgid "The B<l64a>() function is not thread-safe."
646 msgstr "B<l64a>() 関数はスレッドセーフではない。"
649 #: build/C/man3/a64l.3:71
650 msgid "The B<a64l>() function is thread-safe."
651 msgstr "B<a64l>() 関数はスレッドセーフである。"
654 #: build/C/man3/a64l.3:73 build/C/man3/getsubopt.3:131
655 msgid "POSIX.1-2001."
656 msgstr "POSIX.1-2001."
659 #: build/C/man3/a64l.3:78
661 "The value returned by B<l64a>() may be a pointer to a static buffer, "
662 "possibly overwritten by later calls."
664 "B<l64a>() で返される値は静的バッファへのポインタかもしれないので、 以降の呼"
668 #: build/C/man3/a64l.3:87
670 "The behavior of B<l64a>() is undefined when I<value> is negative. If "
671 "I<value> is zero, it returns an empty string."
673 "I<value> が負の場合、 B<l64a>() の動作は定義されていない。 I<value> が 0 の"
677 #: build/C/man3/a64l.3:90
679 "These functions are broken in glibc before 2.2.5 (puts most significant "
682 "これらの関数は glibc 2.2.5 以前では間違っている (最上位デジットを最初にしてい"
686 #: build/C/man3/a64l.3:93
687 msgid "This is not the encoding used by B<uuencode>(1)."
688 msgstr "これは B<uuencode>(1) で使われるエンコーディングではない。"
692 #: build/C/man3/a64l.3:97
693 msgid "B<uuencode>(1), B<strtoul>(3)"
694 msgstr "B<uuencode>(1), B<strtoul>(3)"
697 #: build/C/man3/atexit.3:33
703 #: build/C/man3/atexit.3:33 build/C/man3/on_exit.3:31
709 #: build/C/man3/atexit.3:36
710 msgid "atexit - register a function to be called at normal process termination"
711 msgstr "atexit - プロセスが正常終了した時に呼び出される関数を登録する"
714 #: build/C/man3/atexit.3:41
716 msgid "B<int atexit(void (*>I<function>B<)(void));>\n"
717 msgstr "B<int atexit(void (*>I<function>B<)(void));>\n"
720 #: build/C/man3/atexit.3:54
722 "The B<atexit>() function registers the given I<function> to be called at "
723 "normal process termination, either via B<exit>(3) or via return from the "
724 "program's I<main>(). Functions so registered are called in the reverse "
725 "order of their registration; no arguments are passed."
727 "B<atexit>() 関数は、与えられた I<function> を、 B<exit>(3) やプログラムの "
728 "I<main>() 関数からの返りを通じて、プロセスが正常終了した時に呼び出される 関"
729 "数として登録する。 ここで定義された関数は、登録した順番とは逆の順番で呼び出さ"
730 "れる。 登録した関数に引き数は渡されない。"
733 #: build/C/man3/atexit.3:57 build/C/man3/on_exit.3:69
735 "The same function may be registered multiple times: it is called once for "
738 "同じ関数を複数回登録してもよい。 登録された関数は登録 1 回につき 1 回呼び出さ"
742 #: build/C/man3/atexit.3:63
744 "POSIX.1-2001 requires that an implementation allow at least B<ATEXIT_MAX> "
745 "(32) such functions to be registered. The actual limit supported by an "
746 "implementation can be obtained using B<sysconf>(3)."
748 "POSIX.1-2001 では、このような関数を少なくとも B<ATEXIT_MAX> 個 (32個) 登録で"
749 "きることを要求している。 その実装でサポートされている実際の上限は B<sysconf>"
753 #: build/C/man3/atexit.3:71 build/C/man3/on_exit.3:76
755 "When a child process is created via B<fork>(2), it inherits copies of its "
756 "parent's registrations. Upon a successful call to one of the B<exec>(3) "
757 "functions, all registrations are removed."
759 "B<fork>(2) で作成された場合、子プロセスは親プロセスの登録のコピーを継承す"
761 "B<exec>(3) ファミリーの関数の場合、呼び出しに成功すると、 全ての登録が削除さ"
765 #: build/C/man3/atexit.3:76
767 "The B<atexit>() function returns the value 0 if successful; otherwise it "
768 "returns a nonzero value."
770 "B<atexit>() 関数は、関数登録が成功した時には 0 を返す。 その他の場合には 0 "
774 #: build/C/man3/atexit.3:78
775 msgid "SVr4, 4.3BSD, C89, C99, POSIX.1-2001."
776 msgstr "SVr4, 4.3BSD, C89, C99, POSIX.1-2001."
779 #: build/C/man3/atexit.3:85
781 "Functions registered using B<atexit>() (and B<on_exit>(3)) are not called "
782 "if a process terminates abnormally because of the delivery of a signal."
784 "B<atexit>() (と B<on_exit>(3)) を使って登録された関数は、 シグナルの配送に"
785 "よりプロセスが異常終了した場合には呼び出されない。"
788 #: build/C/man3/atexit.3:92
790 "If one of the functions registered functions calls B<_exit>(2), then any "
791 "remaining functions are not invoked, and the other process termination steps "
792 "performed by B<exit>(3) are not performed."
794 "登録された関数の一つが B<_exit>(2) を呼び出した場合、残りの関数はどれも起動"
795 "されず、 B<exit>(3) により実行される他のプロセス終了ステップは実行されない。"
797 #. This can happen on OpenBSD 4.2 for example, and is documented
798 #. as occurring on FreeBSD as well.
799 #. Glibc does "the Right Thing" -- invocation of the remaining
800 #. exit handlers carries on as normal.
802 #: build/C/man3/atexit.3:109
804 "POSIX.1-2001 says that the result of calling B<exit>(3) more than once (i."
805 "e., calling B<exit>(3) within a function registered using B<atexit>()) is "
806 "undefined. On some systems (but not Linux), this can result in an infinite "
807 "recursion; portable programs should not invoke B<exit>(3) inside a function "
808 "registered using B<atexit>()."
810 "POSIX.1-2001 では、 B<atexit>() を使って登録された一つの関数内で、複数回 "
811 "B<exit>(3) を呼び出した際の結果は未定義である。 (Linux ではないが) いくつか"
812 "のシステムでは、この場合、 繰り返しが無限に起こることになる。 移植性が必要な"
813 "プログラムでは、 B<atexit>() で登録された関数内で B<exit>(3) を起動すべきで"
817 #: build/C/man3/atexit.3:118
819 "The B<atexit>() and B<on_exit>(3) functions register functions on the same "
820 "list: at normal process termination, the registered functions are invoked in "
821 "reverse order of their registration by these two functions."
823 "B<atexit>() と B<on_exit>(3) は、同じリストに対して関数を登録する。 プロセ"
824 "スが正常に終了した際には、 これらの二つの関数で登録された順序の逆順で、 登録"
827 #. In glibc, things seem to be handled okay
829 #: build/C/man3/atexit.3:124
831 "POSIX.1-2001 says that the result is undefined if B<longjmp>(3) is used to "
832 "terminate execution of one of the functions registered B<atexit>()."
834 "POSIX.1-2001 では、 B<atexit>() で登録された関数の実行を終了するために "
835 "B<longjmp>(3) が使用された場合の結果は未定義である。"
838 #: build/C/man3/atexit.3:124
844 #: build/C/man3/atexit.3:131
846 "Since glibc 2.2.3, B<atexit>() (and B<on_exit>(3)) can be used within a "
847 "shared library to establish functions that are called when the shared "
848 "library is unloaded."
850 "glibc 2.2.3 以降では、共有ライブラリがアンロードされるときに呼ばれる 関数を登"
851 "録するために、共有ライブラリの中で B<atexit>() (と B<on_exit>(3)) を使用す"
855 #: build/C/man3/atexit.3:131 build/C/man3/getsubopt.3:138
856 #: build/C/man3/rand.3:160 build/C/man3/rpmatch.3:119
857 #: build/C/man3/strtod.3:174 build/C/man3/strtol.3:204
858 #: build/C/man3/strtoul.3:208
864 #: build/C/man3/atexit.3:136
867 "#include E<lt>stdio.hE<gt>\n"
868 "#include E<lt>stdlib.hE<gt>\n"
869 "#include E<lt>unistd.hE<gt>\n"
871 "#include E<lt>stdio.hE<gt>\n"
872 "#include E<lt>stdlib.hE<gt>\n"
873 "#include E<lt>unistd.hE<gt>\n"
876 #: build/C/man3/atexit.3:142
882 " printf(\"That was all, folks\\en\");\n"
888 " printf(\"That was all, folks\\en\");\n"
892 #: build/C/man3/atexit.3:148
908 #: build/C/man3/atexit.3:151
911 " a = sysconf(_SC_ATEXIT_MAX);\n"
912 " printf(\"ATEXIT_MAX = %ld\\en\", a);\n"
914 " a = sysconf(_SC_ATEXIT_MAX);\n"
915 " printf(\"ATEXIT_MAX = %ld\\en\", a);\n"
918 #: build/C/man3/atexit.3:157
921 " i = atexit(bye);\n"
923 " fprintf(stderr, \"cannot set exit function\\en\");\n"
924 " exit(EXIT_FAILURE);\n"
927 " i = atexit(bye);\n"
929 " fprintf(stderr, \"cannot set exit function\\en\");\n"
930 " exit(EXIT_FAILURE);\n"
934 #: build/C/man3/atexit.3:160 build/C/man3/getsubopt.3:225
935 #: build/C/man3/rand.3:215 build/C/man3/strtol.3:284
938 " exit(EXIT_SUCCESS);\n"
941 " exit(EXIT_SUCCESS);\n"
945 #: build/C/man3/atexit.3:165
946 msgid "B<_exit>(2), B<exit>(3), B<on_exit>(3)"
947 msgstr "B<_exit>(2), B<exit>(3), B<on_exit>(3)"
950 #: build/C/man3/atof.3:31
956 #: build/C/man3/atof.3:31 build/C/man3/atoi.3:33
962 #: build/C/man3/atof.3:31 build/C/man3/atoi.3:33
963 #: build/C/man3/canonicalize_file_name.3:26 build/C/man3/drand48_r.3:27
964 #: build/C/man3/ecvt_r.3:30 build/C/man3/getauxval.3:27
965 #: build/C/man3/getenv.3:33 build/C/man3/getsubopt.3:25
966 #: build/C/man3/malloc.3:30 build/C/man3/mblen.3:16 build/C/man3/mbstowcs.3:16
967 #: build/C/man3/mbtowc.3:16 build/C/man3/mkdtemp.3:26
968 #: build/C/man3/mkstemp.3:35 build/C/man3/mktemp.3:34
969 #: build/C/man3/on_exit.3:31 build/C/man3/putenv.3:36 build/C/man3/qecvt.3:28
970 #: build/C/man3/random.3:33 build/C/man3/random_r.3:26
971 #: build/C/man3/rpmatch.3:29 build/C/man3/setenv.3:37 build/C/man3/strtol.3:31
972 #: build/C/man3/strtoul.3:33 build/C/man3/wcstombs.3:16
973 #: build/C/man3/wctomb.3:16
979 #: build/C/man3/atof.3:34
980 msgid "atof - convert a string to a double"
981 msgstr "atof - 文字列を double 型の数値に変換"
984 #: build/C/man3/atof.3:39
986 msgid "B<double atof(const char *>I<nptr>B<);>\n"
987 msgstr "B<double atof(const char *>I<nptr>B<);>\n"
990 #: build/C/man3/atof.3:47
992 "The B<atof>() function converts the initial portion of the string pointed "
993 "to by I<nptr> to I<double>. The behavior is the same as"
995 "B<atof>() 関数は、I<nptr>によって指示される文字列のはじめの部分を I<double> "
996 "型の数値に変換する。 この振る舞いは、 B<atof>() 関数がエラーを見つけないこと"
1000 #: build/C/man3/atof.3:50
1001 msgid "strtod(nptr, NULL);"
1002 msgstr "strtod(nptr, NULL);"
1005 #: build/C/man3/atof.3:55
1006 msgid "except that B<atof>() does not detect errors."
1010 #: build/C/man3/atof.3:57 build/C/man3/atoi.3:93
1011 msgid "The converted value."
1015 #: build/C/man3/atof.3:59
1016 msgid "SVr4, POSIX.1-2001, 4.3BSD, C89, C99."
1017 msgstr "SVr4, POSIX.1-2001, 4.3BSD, C89, C99."
1020 #: build/C/man3/atof.3:65
1021 msgid "B<atoi>(3), B<atol>(3), B<strtod>(3), B<strtol>(3), B<strtoul>(3)"
1022 msgstr "B<atoi>(3), B<atol>(3), B<strtod>(3), B<strtol>(3), B<strtoul>(3)"
1025 #: build/C/man3/atoi.3:33
1031 #: build/C/man3/atoi.3:36
1032 msgid "atoi, atol, atoll, atoq - convert a string to an integer"
1033 msgstr "atoi, atol, atoll, atoq - 文字列を整数型に変換する"
1036 #: build/C/man3/atoi.3:41
1038 msgid "B<int atoi(const char *>I<nptr>B<);>\n"
1039 msgstr "B<int atoi(const char *>I<nptr>B<);>\n"
1042 #: build/C/man3/atoi.3:43
1044 msgid "B<long atol(const char *>I<nptr>B<);>\n"
1045 msgstr "B<long atol(const char *>I<nptr>B<);>\n"
1048 #: build/C/man3/atoi.3:45
1050 msgid "B<long long atoll(const char *>I<nptr>B<);>\n"
1051 msgstr "B<long long atoll(const char *>I<nptr>B<);>\n"
1054 #: build/C/man3/atoi.3:47
1056 msgid "B<long long atoq(const char *>I<nptr>B<);>\n"
1057 msgstr "B<long long atoq(const char *>I<nptr>B<);>\n"
1060 #: build/C/man3/atoi.3:56
1062 msgstr "B<atoll>():"
1065 #: build/C/man3/atoi.3:59
1067 "_BSD_SOURCE || _SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 600 || "
1068 "_ISOC99_SOURCE || _POSIX_C_SOURCE\\ E<gt>=\\ 200112L;"
1070 "_BSD_SOURCE || _SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 600 || "
1071 "_ISOC99_SOURCE || _POSIX_C_SOURCE\\ E<gt>=\\ 200112L;"
1074 #: build/C/man3/atoi.3:71
1076 "The B<atoi>() function converts the initial portion of the string pointed "
1077 "to by I<nptr> to I<int>. The behavior is the same as"
1079 "B<atoi>() 関数は、I<nptr> によって指示される文字列のはじめの部分を I<int> 型"
1080 "整数に変換する。 この振る舞いは、 B<atoi>() 関数がエラーを見つけない点以外"
1084 #: build/C/man3/atoi.3:74
1085 msgid "strtol(nptr, NULL, 10);"
1086 msgstr "strtol(nptr, NULL, 10);"
1089 #: build/C/man3/atoi.3:79
1090 msgid "except that B<atoi>() does not detect errors."
1094 #: build/C/man3/atoi.3:91
1096 "The B<atol>() and B<atoll>() functions behave the same as B<atoi>(), "
1097 "except that they convert the initial portion of the string to their return "
1098 "type of I<long> or I<long long>. B<atoq>() is an obsolete name for B<atoll>"
1101 "B<atol>() 関数と B<atoll>() 関数は B<atoi>() と同様の振る舞いをするが、 文"
1102 "字列のはじめの部分をそれぞれ I<long> や I<long long> に変換する。 B<atoq>() "
1103 "は B<atoll>() の古い名前である。"
1106 #: build/C/man3/atoi.3:103
1108 "SVr4, POSIX.1-2001, 4.3BSD, C99. C89 and POSIX.1-1996 include the functions "
1109 "B<atoi>() and B<atol>() only. B<atoq>() is a GNU extension."
1111 "SVr4, POSIX.1-2001, 4.3BSD, C99. C89 と POSIX.1-1996 には B<atoi>() と "
1112 "B<atol>() だけが含まれている。 B<atoq>() は GNU による拡張である。"
1115 #: build/C/man3/atoi.3:113
1117 "The nonstandard B<atoq>() function is not present in libc 4.6.27 or glibc "
1118 "2, but is present in libc5 and libc 4.7 (though only as an inline function "
1119 "in I<E<lt>stdlib.hE<gt>> until libc 5.4.44). The B<atoll>() function is "
1120 "present in glibc 2 since version 2.0.2, but not in libc4 or libc5."
1122 "非標準である B<atoq>() 関数は libc 4.6.27 や glibc 2 には含まれていないが、 "
1123 "libc5 と libc 4.7 には存在している (ただし libc 5.4.44 までは I<E<lt>stdlib."
1124 "hE<gt>> のインライン関数のみである)。 B<atoll>() 関数は glibc 2 のバージョ"
1125 "ン 2.0.2 から存在しているが、 libc4 や libc5 には存在しない。"
1128 #: build/C/man3/atoi.3:118
1129 msgid "B<atof>(3), B<strtod>(3), B<strtol>(3), B<strtoul>(3)"
1130 msgstr "B<atof>(3), B<strtod>(3), B<strtol>(3), B<strtoul>(3)"
1133 #: build/C/man3/canonicalize_file_name.3:26
1135 msgid "CANONICALIZE_FILE_NAME"
1136 msgstr "CANONICALIZE_FILE_NAME"
1139 #: build/C/man3/canonicalize_file_name.3:26
1145 #: build/C/man3/canonicalize_file_name.3:29
1146 msgid "canonicalize_file_name - return the canonicalized absolute pathname"
1147 msgstr "canonicalize_file_name - 正規化された絶対パス名を返す"
1150 #: build/C/man3/canonicalize_file_name.3:31
1151 msgid "B<#define _GNU_SOURCE> /* See feature_test_macros(7) */"
1152 msgstr "B<#define _GNU_SOURCE> /* feature_test_macros(7) 参照 */"
1155 #: build/C/man3/canonicalize_file_name.3:35
1156 msgid "B<char *canonicalize_file_name(const char *>I<path>B<);>"
1157 msgstr "B<char *canonicalize_file_name(const char *>I<path>B<);>"
1160 #: build/C/man3/canonicalize_file_name.3:49
1162 "The B<canonicalize_file_name>() function returns a null-terminated string "
1163 "containing the canonicalized absolute pathname corresponding to I<path>. In "
1164 "the returned string, symbolic links are resolved, as are I<.> and I<..> "
1165 "pathname components. Consecutive slash (I</>) characters are replaced by a "
1168 "B<canonicalize_file_name>() 関数は I<path> に対応する正規化された絶対パス名を"
1169 "示す NULL 終端された文字列を返す。返された文字列では、シンボリックリンクや、"
1170 "パス名に含まれる I<.> や I<..> は展開される。連続するスラッシュ (I</>) 文字は"
1174 #: build/C/man3/canonicalize_file_name.3:55
1176 "The returned string is dynamically allocated by B<canonicalize_file_name>() "
1177 "and the caller should deallocate it with B<free>(3) when it is no longer "
1180 "返される文字列は B<canonicalize_file_name>() により動的に割り当てられる。呼び"
1181 "出し側は、必要なくなった際にはこの文字列を B<free>(3) で解放すべきである。"
1184 #: build/C/man3/canonicalize_file_name.3:59
1185 msgid "The call I<canonicalize_file_name(path)> is equivalent to the call:"
1186 msgstr "I<canonicalize_file_name(path)> は以下と等価である。"
1189 #: build/C/man3/canonicalize_file_name.3:61
1191 msgid " realpath(path, NULL);\n"
1192 msgstr " realpath(path, NULL);\n"
1195 #: build/C/man3/canonicalize_file_name.3:70
1197 "On success, B<canonicalize_file_name>() returns a null-terminated string. "
1198 "On error (e.g., a pathname component is unreadable or does not exist), "
1199 "B<canonicalize_file_name>() returns NULL and sets I<errno> to indicate the "
1202 "成功すると、 B<canonicalize_file_name>() は NULL 終端された文字列を返す。エ"
1203 "ラーの場合 (例えば、パス名の中に読み込めなかったり存在しないパスが含まれてい"
1204 "る場合など)、 B<canonicalize_file_name>() は NULL を返し、 I<errno> にエラー"
1208 #: build/C/man3/canonicalize_file_name.3:70 build/C/man3/getauxval.3:179
1209 #: build/C/man3/mkdtemp.3:75 build/C/man3/mkstemp.3:142
1210 #: build/C/man3/mktemp.3:88 build/C/man3/putenv.3:75 build/C/man3/random.3:140
1211 #: build/C/man3/random_r.3:105 build/C/man3/rpmatch.3:82
1212 #: build/C/man3/setenv.3:118 build/C/man3/strtod.3:156
1213 #: build/C/man3/strtol.3:144 build/C/man3/strtoul.3:148
1219 #: build/C/man3/canonicalize_file_name.3:73
1220 msgid "See B<realpath>(3)."
1221 msgstr "B<realpath>(3) 参照。"
1224 #: build/C/man3/canonicalize_file_name.3:75
1225 msgid "This function is a GNU extension."
1226 msgstr "この関数は GNU による拡張である。"
1229 #: build/C/man3/canonicalize_file_name.3:78
1230 msgid "B<readlink>(2), B<realpath>(3)"
1231 msgstr "B<readlink>(2), B<realpath>(3)"
1234 #: build/C/man3/cfree.3:24
1240 #: build/C/man3/cfree.3:24 build/C/man3/drand48_r.3:27
1241 #: build/C/man3/ecvt_r.3:30 build/C/man3/rpmatch.3:29
1247 #: build/C/man3/cfree.3:27
1248 msgid "cfree - free allocated memory"
1249 msgstr "cfree - 割り当てられたメモリを解放する"
1252 #: build/C/man3/cfree.3:34
1255 "/* In SunOS 4 */\n"
1256 "B<int cfree(void *>I<ptr>B<);>\n"
1258 "/* SunOS 4 では */\n"
1259 "B<int cfree(void *>I<ptr>B<);>\n"
1262 #: build/C/man3/cfree.3:37
1265 "/* In glibc or FreeBSD libcompat */\n"
1266 "B<void cfree(void *>I<ptr>B<);>\n"
1268 "/* glibc と FreeBSD libcompat では */\n"
1269 "B<void cfree(void *>I<ptr>B<);>\n"
1272 #: build/C/man3/cfree.3:40
1275 "/* In SCO OpenServer */\n"
1276 "B<void cfree(char *>I<ptr>B<, unsigned >I<num>B<, unsigned >I<size>B<);>\n"
1278 "/* SCO OpenServer では */\n"
1279 "B<void cfree(char *>I<ptr>B<, unsigned >I<num>B<, unsigned >I<size>B<);>\n"
1282 #: build/C/man3/cfree.3:43
1285 "/* In Solaris watchmalloc.so.1 */\n"
1286 "B<void cfree(void *>I<ptr>B<, size_t >I<nelem>B<, size_t >I<elsize>B<);>\n"
1288 "/* Solaris watchmalloc.so.1 では */\n"
1289 "B<void cfree(void *>I<ptr>B<, size_t >I<nelem>B<, size_t >I<elsize>B<);>\n"
1292 #: build/C/man3/cfree.3:52
1293 msgid "B<cfree>(): _BSD_SOURCE || _SVID_SOURCE"
1294 msgstr "B<cfree>(): _BSD_SOURCE || _SVID_SOURCE"
1297 #: build/C/man3/cfree.3:57
1298 msgid "This function should never be used. Use B<free>(3) instead."
1299 msgstr "この関数は決して使用すべきではない。 代わりに B<free>(3) を使うこと。"
1302 #: build/C/man3/cfree.3:57
1305 msgstr "引き数が 1 つの cfree"
1308 #: build/C/man3/cfree.3:63
1310 "In glibc, the function B<cfree>() is a synonym for B<free>(3), \"added for "
1311 "compatibility with SunOS\"."
1313 "glibc では、関数 B<cfree>() は B<free>(3) の別名であり、「SunOS との互換性"
1317 #: build/C/man3/cfree.3:69
1319 "Other systems have other functions with this name. The declaration is "
1320 "sometimes in I<E<lt>stdlib.hE<gt>> and sometimes in I<E<lt>malloc.hE<gt>>."
1322 "他のシステムでは、この名前の別の関数がある。 この宣言は I<E<lt>stdlib."
1323 "hE<gt>> に存在する場合もあるし、 I<E<lt>malloc.hE<gt>> に存在する場合もある。"
1326 #: build/C/man3/cfree.3:69
1329 msgstr "引き数が 3 つの cfree"
1332 #: build/C/man3/cfree.3:74
1334 "Some SCO and Solaris versions have malloc libraries with a 3-argument "
1335 "B<cfree>(), apparently as an analog to B<calloc>(3)."
1337 "SCO と Solaris のいくつかのバージョンでは、 引き数が 3 つの B<cfree>() が含"
1338 "まれる malloc ライブラリがある。 これは明らかに B<calloc>(3) に類似してい"
1342 #: build/C/man3/cfree.3:76
1343 msgid "If you need it while porting something, add"
1344 msgstr "何かを移植する時にこの関数が必要な場合、"
1347 #: build/C/man3/cfree.3:79
1348 msgid "#define cfree(p, n, s) free((p))"
1349 msgstr "#define cfree(p, n, s) free((p))"
1352 #: build/C/man3/cfree.3:82
1353 msgid "to your file."
1354 msgstr "をファイルに追加すること。"
1357 #: build/C/man3/cfree.3:91
1359 "A frequently asked question is \"Can I use B<free>(3) to free memory "
1360 "allocated with B<calloc>(3), or do I need B<cfree>()?\" Answer: use B<free>"
1363 "よく尋ねられる質問は 「B<calloc>(3) で割り当てられたメモリを解放するのに "
1364 "B<free>(3) を使うことができるか、 それとも B<cfree>() を使う必要があるか」"
1365 "というものである。 答え: B<free>(3) を使うこと。"
1368 #: build/C/man3/cfree.3:96
1370 "An SCO manual writes: \"The cfree routine is provided for compliance to the "
1371 "iBCSe2 standard and simply calls free. The num and size arguments to cfree "
1374 "SCO のマニュアルには以下のように記述されている: 「cfree ルーチンは iBCSe2 規"
1375 "格に従うために提供されており、 単に free を呼んでいるだけである。 cfree の "
1376 "num と size 引き数は使用されない。」"
1379 #: build/C/man3/cfree.3:112
1381 "The SunOS version of B<cfree>() (which is a synonym for B<free>(3)) "
1382 "returns 1 on success and 0 on failure. In case of error, I<errno> is set to "
1383 "B<EINVAL>: the value of I<ptr> was not a pointer to a block previously "
1384 "allocated by one of the routines in the B<malloc>(3) family."
1386 "SunOS 版の B<cfree>() (B<free>(3) の別名) は、成功した場合に 1 を返し、失敗"
1387 "した場合に 0 を返す。 エラーの場合、 I<errno> が B<EINVAL> に設定される: "
1388 "I<ptr> の値が B<malloc>() 系のルーチンの 1 つで以前に割り当てられた ブロック"
1392 #: build/C/man3/cfree.3:117
1394 "The 3-argument version of B<cfree>() as used by SCO conforms to the iBCSe2 "
1395 "standard: Intel386 Binary Compatibility Specification, Edition 2."
1397 "SCO で用いられている引き数が 3 つの B<cfree>() は、iBCSe2 規格: Intel386 "
1398 "Binary Compatibility Specification, Edition 2 (Intel386 バイナリ互換仕様、第 "
1402 #: build/C/man3/cfree.3:119
1403 msgid "B<malloc>(3)"
1404 msgstr "B<malloc>(3)"
1407 #: build/C/man3/clearenv.3:26
1413 #: build/C/man3/clearenv.3:26
1419 #: build/C/man3/clearenv.3:29
1420 msgid "clearenv - clear the environment"
1421 msgstr "clearenv - 環境 (environment) をクリアする"
1424 #: build/C/man3/clearenv.3:34
1426 msgid "B<int clearenv(void);>\n"
1427 msgstr "B<int clearenv(void);>\n"
1430 #: build/C/man3/clearenv.3:43
1431 msgid "B<clearenv>(): _SVID_SOURCE || _BSD_SOURCE"
1432 msgstr "B<clearenv>(): _SVID_SOURCE || _BSD_SOURCE"
1435 #: build/C/man3/clearenv.3:50
1437 "The B<clearenv>() function clears the environment of all name-value pairs "
1438 "and sets the value of the external variable I<environ> to NULL."
1440 "B<clearenv>() 関数は、名前と値が組になった全ての環境をクリアする。 さらに外"
1441 "部変数 I<environ> の値を NULL にする。"
1443 #. Most versions of UNIX return -1 on error, or do not even have errors.
1444 #. Glibc info and the Watcom C library document "a nonzero value".
1446 #: build/C/man3/clearenv.3:57
1448 "The B<clearenv>() function returns zero on success, and a nonzero value on "
1451 "B<clearenv>() 関数は、成功した場合は 0 を返し、 失敗した場合は 0 以外を返"
1455 #: build/C/man3/clearenv.3:57 build/C/man3/getauxval.3:181
1456 #: build/C/man3/getenv.3:93 build/C/man3/getloadavg.3:63
1457 #: build/C/man3/mkdtemp.3:84 build/C/man3/mkstemp.3:169
1463 #: build/C/man3/clearenv.3:60
1464 msgid "Not in libc4, libc5. In glibc since glibc 2.0."
1465 msgstr "libc4, libc5 では使用できない。 glibc 2.0 以降の glibc で使用できる。"
1468 #: build/C/man3/clearenv.3:74
1470 "Various UNIX variants (DG/UX, HP-UX, QNX, ...). POSIX.9 (bindings for "
1471 "FORTRAN77). POSIX.1-1996 did not accept B<clearenv>() and B<putenv>(3), "
1472 "but changed its mind and scheduled these functions for some later issue of "
1473 "this standard (cf. B.4.6.1). However, POSIX.1-2001 adds only B<putenv>(3), "
1474 "and rejected B<clearenv>()."
1476 "(DG/UX, HP-UX, QNX, などの) 多くの UNIX 系 OS。 (FORTRAN77 へのバインディング"
1477 "である) POSIX.9。 POSIX.1-1996 では B<clearenv>() と B<putenv>(3) は採用さ"
1478 "れなかったが、 方針が変更され、この標準規格の以降の号 (B.4.6.1 を参照) では "
1479 "採用されることになった。 しかし POSIX.1-2001 では B<putenv>(3) だけが追加さ"
1480 "れ、 B<clearenv>() の追加は否決された。"
1483 #: build/C/man3/clearenv.3:78
1485 "Used in security-conscious applications. If it is unavailable the assignment"
1487 "この関数はセキュリティに考慮したアプリケーションで使われる。 この関数が使用で"
1491 #: build/C/man3/clearenv.3:81
1493 msgid " environ = NULL;\n"
1494 msgstr " environ = NULL;\n"
1497 #: build/C/man3/clearenv.3:84
1498 msgid "will probably do."
1499 msgstr "というように変数 environ を設定すればよい。"
1502 #. HP-UX has a ENOMEM error return.
1504 #: build/C/man3/clearenv.3:97
1506 "The DG/UX and Tru64 man pages write: If I<environ> has been modified by "
1507 "anything other than the B<putenv>(3), B<getenv>(3), or B<clearenv>() "
1508 "functions, then B<clearenv>() will return an error and the process "
1509 "environment will remain unchanged."
1511 "DG/UX と Tru64 man ページには次のように記されている: I<environ> が B<putenv>"
1512 "(3), B<getenv>(3), B<clearenv>() 関数以外で変更された場合、 B<clearenv>() "
1513 "はエラーを返し、プロセス環境は変更前のままにされる。"
1516 #: build/C/man3/clearenv.3:103
1517 msgid "B<getenv>(3), B<putenv>(3), B<setenv>(3), B<unsetenv>(3), B<environ>(7)"
1519 "B<getenv>(3), B<putenv>(3), B<setenv>(3), B<unsetenv>(3), B<environ>(7)"
1522 #: build/C/man3/drand48.3:30
1528 #: build/C/man3/drand48.3:34
1530 "drand48, erand48, lrand48, nrand48, mrand48, jrand48, srand48, seed48, "
1531 "lcong48 - generate uniformly distributed pseudo-random numbers"
1533 "drand48, erand48, lrand48, nrand48, mrand48, jrand48, srand48, seed48, "
1534 "lcong48 - 一様分布する疑似乱数を生成する関数"
1537 #: build/C/man3/drand48.3:39
1539 msgid "B<double drand48(void);>\n"
1540 msgstr "B<double drand48(void);>\n"
1543 #: build/C/man3/drand48.3:41
1545 msgid "B<double erand48(unsigned short >I<xsubi>B<[3]);>\n"
1546 msgstr "B<double erand48(unsigned short >I<xsubi>B<[3]);>\n"
1549 #: build/C/man3/drand48.3:43
1551 msgid "B<long int lrand48(void);>\n"
1552 msgstr "B<long int lrand48(void);>\n"
1555 #: build/C/man3/drand48.3:45
1557 msgid "B<long int nrand48(unsigned short >I<xsubi>B<[3]);>\n"
1558 msgstr "B<long int nrand48(unsigned short >I<xsubi>B<[3]);>\n"
1561 #: build/C/man3/drand48.3:47
1563 msgid "B<long int mrand48(void);>\n"
1564 msgstr "B<long int mrand48(void);>\n"
1567 #: build/C/man3/drand48.3:49
1569 msgid "B<long int jrand48(unsigned short >I<xsubi>B<[3]);>\n"
1570 msgstr "B<long int jrand48(unsigned short >I<xsubi>B<[3]);>\n"
1573 #: build/C/man3/drand48.3:51
1575 msgid "B<void srand48(long int >I<seedval>B<);>\n"
1576 msgstr "B<void srand48(long int >I<seedval>B<);>\n"
1579 #: build/C/man3/drand48.3:53
1581 msgid "B<unsigned short *seed48(unsigned short >I<seed16v>B<[3]);>\n"
1582 msgstr "B<unsigned short *seed48(unsigned short >I<seed16v>B<[3]);>\n"
1585 #: build/C/man3/drand48.3:55
1587 msgid "B<void lcong48(unsigned short >I<param>B<[7]);>\n"
1588 msgstr "B<void lcong48(unsigned short >I<param>B<[7]);>\n"
1600 #: build/C/man3/drand48.3:74
1601 msgid "All functions shown above: _SVID_SOURCE || _XOPEN_SOURCE"
1602 msgstr "上記の全ての関数: _SVID_SOURCE || _XOPEN_SOURCE"
1605 #: build/C/man3/drand48.3:78
1607 "These functions generate pseudo-random numbers using the linear congruential "
1608 "algorithm and 48-bit integer arithmetic."
1610 "これらの関数は線形合同アルゴリズムと 48ビット整数演算を用いて 疑似乱数を生成"
1614 #: build/C/man3/drand48.3:86
1616 "The B<drand48>() and B<erand48>() functions return nonnegative double-"
1617 "precision floating-point values uniformly distributed between [0.0, 1.0)."
1619 "関数 B<drand48>() と B<erand48>() は、区間 [0.0, 1.0) で 一様分布する非負の"
1623 #: build/C/man3/drand48.3:93
1625 "The B<lrand48>() and B<nrand48>() functions return nonnegative long "
1626 "integers uniformly distributed between 0 and 2^31."
1628 "関数 B<lrand48>() と B<nrand48>() は 0 と 2^31 の間で一様分布する 非負のロ"
1632 #: build/C/man3/drand48.3:100
1634 "The B<mrand48>() and B<jrand48>() functions return signed long integers "
1635 "uniformly distributed between -2^31 and 2^31."
1637 "関数 B<mrand48>() と B<jrand48>() は -2^31 と 2^31 の間で一様分布する符号付"
1641 #: build/C/man3/drand48.3:119
1643 "The B<srand48>(), B<seed48>() and B<lcong48>() functions are "
1644 "initialization functions, one of which should be called before using "
1645 "B<drand48>(), B<lrand48>() or B<mrand48>(). The functions B<erand48>(), "
1646 "B<nrand48>() and B<jrand48>() do not require an initialization function to "
1649 "関数 B<srand48>(), B<seed48>(), B<lcong48>() は初期化関数 である。 関数 "
1650 "B<drand48>(), B<lrand48>(), B<mrand48>() を 使用する前に、これらの初期化関数"
1651 "のいずれかを呼ぶべきである。 関数 B<erand48>(), B<nrand48>(), B<jrand48>() "
1652 "は初めに 初期化関数を呼ぶことを必要としない。"
1655 #: build/C/man3/drand48.3:123
1657 "All the functions work by generating a sequence of 48-bit integers, I<Xi>, "
1658 "according to the linear congruential formula:"
1660 "ここで説明しているすべての関数は 48ビットの整数の シーケンス (I<Xi>) を生成す"
1661 "ることで 機能している。生成方法は以下の線形合同の式による。"
1664 #: build/C/man3/drand48.3:127
1666 msgid "B<Xn+1 = (aXn + c) mod m, where n E<gt>= 0>\n"
1667 msgstr "B<Xn+1 = (aXn + c) mod m,>\n"
1670 #: build/C/man3/drand48.3:140
1672 "The parameter I<m> = 2^48, hence 48-bit integer arithmetic is performed. "
1673 "Unless B<lcong48>() is called, I<a> and I<c> are given by:"
1675 "ここで n E<gt>= 0 である。 パラメータが I<m> = 2^48 であるため、48ビット整数"
1676 "演算が行われている。 B<lcong48>() が呼ばれていない場合、I<a> と I<c> は以下"
1680 #: build/C/man3/drand48.3:145
1683 "B<a = 0x5DEECE66D>\n"
1686 "B<a = 0x5DEECE66D>\n"
1690 #: build/C/man3/drand48.3:165
1692 "The value returned by any of the functions B<drand48>(), B<erand48>(), "
1693 "B<lrand48>(), B<nrand48>(), B<mrand48>() or B<jrand48>() is computed by "
1694 "first generating the next 48-bit I<Xi> in the sequence. Then the "
1695 "appropriate number of bits, according to the type of data item to be "
1696 "returned, is copied from the high-order bits of I<Xi> and transformed into "
1697 "the returned value."
1699 "関数 B<drand48>(), B<erand48>(), B<lrand48>(), B<nrand48>(), B<mrand48>(), "
1700 "B<jrand48>() で返される値は次のようにして計算される。 はじめに、次の48ビット"
1701 "の I<Xi> が計算される。 そして、返すべきデータの型に依存した適切な ビット数"
1702 "が I<Xi> の上位ビットからコピーされる。 最後に、この値を返り値に変換する。"
1705 #: build/C/man3/drand48.3:191
1707 "The functions B<drand48>(), B<lrand48>() and B<mrand48>() store the last "
1708 "48-bit I<Xi> generated in an internal buffer. The functions B<erand48>(), "
1709 "B<nrand48>() and B<jrand48>() require the calling program to provide "
1710 "storage for the successive I<Xi> values in the array argument I<xsubi>. The "
1711 "functions are initialized by placing the initial value of I<Xi> into the "
1712 "array before calling the function for the first time."
1714 "関数 B<drand48>(), B<lrand48>(), B<mrand48>() は 最後に生成された48ビットの "
1715 "I<Xi> を内部バッファに格納する。 配列の形の引数 I<xsubi> に個々の I<Xi> の値"
1716 "を 格納できるような領域を確保することを、 関数 B<erand48>(), B<nrand48>(), "
1717 "B<jrand48>() は、 呼び出し側のプログラムに要求する。 これらの関数は、はじめ"
1718 "てそれらの関数を呼ぶ前に I<Xi> の初期値を配列に 代入することで初期化される。"
1721 #: build/C/man3/drand48.3:200
1723 "The initializer function B<srand48>() sets the high order 32-bits of I<Xi> "
1724 "to the argument I<seedval>. The low order 16-bits are set to the arbitrary "
1727 "初期化関数 B<srand48>() は、I<Xi> の 上位32ビットを引数 I<seedval> に設定す"
1728 "る。 下位の16ビットは、適当に決められた値である0x330Eに設定される。"
1731 #: build/C/man3/drand48.3:214
1733 "The initializer function B<seed48>() sets the value of I<Xi> to the 48-bit "
1734 "value specified in the array argument I<seed16v>. The previous value of "
1735 "I<Xi> is copied into an internal buffer and a pointer to this buffer is "
1736 "returned by B<seed48>()."
1738 "初期化関数 B<seed48>() は、I<Xi> の値を、 配列の形をした引数である "
1739 "I<seed16v> の中で指定された 48ビットの値に設定する。 I<Xi> の前の値は内部バッ"
1740 "ファにコピーされ、このバッファへのポインタが B<seed48>() によって返される。"
1743 #: build/C/man3/drand48.3:245
1745 "The initialization function B<lcong48>() allows the user to specify initial "
1746 "values for I<Xi>, I<a> and I<c>. Array argument elements I<param[0-2]> "
1747 "specify I<Xi>, I<param[3-5]> specify I<a>, and I<param[6]> specifies I<c>. "
1748 "After B<lcong48>() has been called, a subsequent call to either B<srand48>"
1749 "() or B<seed48>() will restore the standard values of I<a> and I<c>."
1751 "初期化関数 B<lcong48>() は使用者が I<Xi>, I<a>, I<c> の 初期値を指定するため"
1752 "の関数である。 配列の形をした引数の要素はそれぞれ、I<param[0-2]> は I<Xi> "
1753 "を、 I<param[3-5]> は I<a> を、I<param[6]> は I<c> を指定するもの である。 "
1754 "B<lcong48>() が呼ばれた後で、 B<srand48>() か B<seed48>() を呼ぶと、前述"
1755 "の I<a> と I<c> の 標準値が再び設定される。"
1758 #: build/C/man3/drand48.3:260
1760 "The B<drand48>(), B<erand48>(), B<lrand48>(), B<nrand48>(), B<mrand48>(), "
1761 "B<jrand48>(), B<srand48>(), B<seed48>(), and B<lcong48>() functions record "
1762 "global state information for the random number generator, so they are not "
1765 "関数 B<drand48>(), B<erand48>(), B<lrand48>(), B<nrand48>(), B<mrand48>(), "
1766 "B<jrand48>(), B<srand48>(), B<seed48>(), B<lcong48>() は、 乱数生成に使用する"
1767 "状態情報をグローバルに保持する。 そのため、 これらの関数はスレッドセーフでは"
1771 #: build/C/man3/drand48.3:262
1772 msgid "SVr4, POSIX.1-2001."
1773 msgstr "SVr4, POSIX.1-2001."
1776 #: build/C/man3/drand48.3:266
1778 "These functions are declared obsolete by SVID 3, which states that B<rand>"
1779 "(3) should be used instead."
1781 "SVID 3 ではこれらの関数は時代遅れと宣言されている。 SVID 3 では B<rand>(3) "
1782 "が代わりに使用されるべきだと記述されている。"
1785 #: build/C/man3/drand48.3:269
1786 msgid "B<rand>(3), B<random>(3)"
1787 msgstr "B<rand>(3), B<random>(3)"
1790 #: build/C/man3/drand48_r.3:27
1796 #: build/C/man3/drand48_r.3:32
1798 "drand48_r, erand48_r, lrand48_r, nrand48_r, mrand48_r, jrand48_r, srand48_r, "
1799 "seed48_r, lcong48_r - generate uniformly distributed pseudo-random numbers "
1802 "drand48_r, erand48_r, lrand48_r, nrand48_r, mrand48_r, jrand48_r, srand48_r, "
1803 "seed48_r, lcong48_r - 一様分布する疑似乱数をリエントラント (reentrant) に生成"
1807 #: build/C/man3/drand48_r.3:37
1809 msgid "B<int drand48_r(struct drand48_data *>I<buffer>B<, double *>I<result>B<);>\n"
1810 msgstr "B<int drand48_r(struct drand48_data *>I<buffer>B<, double *>I<result>B<);>\n"
1813 #: build/C/man3/drand48_r.3:39
1815 msgid "B<int erand48_r(unsigned short >I<xsubi>B<[3]>I<,>\n"
1816 msgstr "B<int erand48_r(unsigned short >I<xsubi>B<[3]>I<,>\n"
1819 #: build/C/man3/drand48_r.3:41
1821 msgid "B< struct drand48_data *>I<buffer>B<, double *>I<result>B<);>\n"
1822 msgstr "B< struct drand48_data *>I<buffer>B<, double *>I<result>B<);>\n"
1825 #: build/C/man3/drand48_r.3:43
1827 msgid "B<int lrand48_r(struct drand48_data *>I<buffer>B<, long int *>I<result>B<);>\n"
1828 msgstr "B<int lrand48_r(struct drand48_data *>I<buffer>B<, long int *>I<result>B<);>\n"
1831 #: build/C/man3/drand48_r.3:45
1833 msgid "B<int nrand48_r(unsigned short int >I<xsubi[3]>B<,>\n"
1834 msgstr "B<int nrand48_r(unsigned short int >I<xsubi[3]>B<,>\n"
1837 #: build/C/man3/drand48_r.3:47 build/C/man3/drand48_r.3:53
1839 msgid "B< struct drand48_data *>I<buffer>B<, long int *>I<result>B<);>\n"
1840 msgstr "B< struct drand48_data *>I<buffer>B<, long int *>I<result>B<);>\n"
1843 #: build/C/man3/drand48_r.3:49
1845 msgid "B<int mrand48_r(struct drand48_data *>I<buffer>B<,long int *>I<result>B<);>\n"
1846 msgstr "B<int mrand48_r(struct drand48_data *>I<buffer>B<,long int *>I<result>B<);>\n"
1849 #: build/C/man3/drand48_r.3:51
1851 msgid "B<int jrand48_r(unsigned short int >I<xsubi[3]>B<,>\n"
1852 msgstr "B<int jrand48_r(unsigned short int >I<xsubi[3]>B<,>\n"
1855 #: build/C/man3/drand48_r.3:55
1857 msgid "B<int srand48_r(long int >I<seedval>B<, struct drand48_data *>I<buffer>B<);>\n"
1858 msgstr "B<int srand48_r(long int >I<seedval>B<, struct drand48_data *>I<buffer>B<);>\n"
1861 #: build/C/man3/drand48_r.3:57
1863 msgid "B<int seed48_r(unsigned short int >I<seed16v[3]>B<,>\n"
1864 msgstr "B<int seed48_r(unsigned short int >I<seed16v[3]>B<,>\n"
1867 #: build/C/man3/drand48_r.3:59
1869 msgid "B< struct drand48_data *>I<buffer>B<);>\n"
1870 msgstr "B< struct drand48_data *>I<buffer>B<);>\n"
1873 #: build/C/man3/drand48_r.3:61
1875 msgid "B<int lcong48_r(unsigned short int >I<param[7]>B<,>\n"
1876 msgstr "B<int lcong48_r(unsigned short int >I<param[7]>B<,>\n"
1879 #: build/C/man3/drand48_r.3:63
1881 msgid "B< struct drand48_data *>I<buffer>B<);>\n"
1882 msgstr "B< struct drand48_data *>I<buffer>B<);>\n"
1884 #. .BR drand48_r (),
1885 #. .BR erand48_r (),
1886 #. .BR lrand48_r (),
1887 #. .BR nrand48_r (),
1888 #. .BR mrand48_r (),
1889 #. .BR jrand48_r (),
1890 #. .BR srand48_r (),
1892 #. .BR lcong48_r ():
1894 #: build/C/man3/drand48_r.3:82
1895 msgid "All functions shown above: _SVID_SOURCE || _BSD_SOURCE || _XOPEN_SOURCE"
1896 msgstr "上記の全ての関数: _SVID_SOURCE || _BSD_SOURCE || _XOPEN_SOURCE"
1899 #: build/C/man3/drand48_r.3:89
1901 "These functions are the reentrant analogs of the functions described in "
1902 "B<drand48>(3). Instead of modifying the global random generator state, they "
1903 "use the supplied data I<buffer>."
1905 "これらの関数は B<drand48>(3) で説明されている関数に類似するリエントラントな"
1906 "関数である。 大域的な乱数生成の状態を変更する代わりに、 これらの関数は指定さ"
1907 "れたデータ I<buffer> を使う。"
1910 #: build/C/man3/drand48_r.3:96
1912 "Before the first use, this struct must be initialized, for example, by "
1913 "filling it with zeros, or by calling one of the functions B<srand48_r>(), "
1914 "B<seed48_r>(), or B<lcong48_r>()."
1916 "最初に使う前に、この構造体は初期化されていなければならない。 初期化は、たとえ"
1917 "ば 0 で埋めたり、関数 B<srand48_r>(), B<seed48_r>(), B<lcong48_r>() のいずれ"
1921 #: build/C/man3/drand48_r.3:98
1922 msgid "The return value is 0."
1923 msgstr "返り値は 0 である。"
1926 #: build/C/man3/drand48_r.3:100
1927 msgid "These functions are GNU extensions and are not portable."
1928 msgstr "これらの関数は GNU による拡張であり、移植性はない。"
1931 #: build/C/man3/drand48_r.3:104 build/C/man3/random_r.3:136
1932 msgid "B<drand48>(3), B<rand>(3), B<random>(3)"
1933 msgstr "B<drand48>(3), B<rand>(3), B<random>(3)"
1936 #: build/C/man3/ecvt.3:32
1942 #: build/C/man3/ecvt.3:32
1948 #: build/C/man3/ecvt.3:35
1949 msgid "ecvt, fcvt - convert a floating-point number to a string"
1950 msgstr "ecvt, fcvt - 浮動小数点数の文字列への変換"
1953 #: build/C/man3/ecvt.3:40
1955 "B<char *ecvt(double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,> "
1956 "B<int *>I<sign>B<);>"
1958 "B<char *ecvt(double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,> "
1959 "B<int *>I<sign>B<);>"
1962 #: build/C/man3/ecvt.3:43
1964 "B<char *fcvt(double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,> "
1965 "B<int *>I<sign>B<);>"
1967 "B<char *fcvt(double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,> "
1968 "B<int *>I<sign>B<);>"
1971 #: build/C/man3/ecvt.3:51
1972 msgid "B<ecvt>(), B<fcvt>():"
1973 msgstr "B<ecvt>(), B<fcvt>():"
1976 #: build/C/man3/ecvt.3:54 build/C/man3/gcvt.3:49 build/C/man3/mktemp.3:53
1978 msgid "Since glibc 2.12:"
1979 msgstr "glibc 2.12 以降:"
1982 #: build/C/man3/ecvt.3:61 build/C/man3/gcvt.3:56
1986 " (_XOPEN_SOURCE\\ E<gt>=\\ 500 ||\n"
1987 " _XOPEN_SOURCE\\ &&\\ _XOPEN_SOURCE_EXTENDED) &&\n"
1988 " !(_POSIX_C_SOURCE\\ E<gt>=\\ 200112L || _XOPEN_SOURCE\\ E<gt>=\\ 600)\n"
1991 " (_XOPEN_SOURCE\\ E<gt>=\\ 500 ||\n"
1992 " _XOPEN_SOURCE\\ &&\\ _XOPEN_SOURCE_EXTENDED) &&\n"
1993 " !(_POSIX_C_SOURCE\\ E<gt>=\\ 200112L || _XOPEN_SOURCE\\ E<gt>=\\ 600)\n"
1996 #: build/C/man3/ecvt.3:62 build/C/man3/gcvt.3:57 build/C/man3/mktemp.3:59
1998 msgid "Before glibc 2.12:"
1999 msgstr "glibc 2.12 より前:"
2002 #: build/C/man3/ecvt.3:92
2004 "The B<ecvt>() function converts I<number> to a null-terminated string of "
2005 "I<ndigits> digits (where I<ndigits> is reduced to a system-specific limit "
2006 "determined by the precision of a I<double>), and returns a pointer to the "
2007 "string. The high-order digit is nonzero, unless I<number> is zero. The low "
2008 "order digit is rounded. The string itself does not contain a decimal point; "
2009 "however, the position of the decimal point relative to the start of the "
2010 "string is stored in I<*decpt>. A negative value for I<*decpt> means that "
2011 "the decimal point is to the left of the start of the string. If the sign of "
2012 "I<number> is negative, I<*sign> is set to a nonzero value, otherwise it is "
2013 "set to 0. If I<number> is zero, it is unspecified whether I<*decpt> is 0 or "
2016 "関数 B<ecvt>() は I<number> を NUL 文字で終端された I<ndigits> 文字の文字列"
2017 "へ変換し、その文字列へのポインタを返す (I<ndigits> が I<double> の精度によっ"
2018 "て決定されるシステム依存の上限値より大きい場合は、 その条件値が I<ndigits> の"
2019 "値となる)。 I<number> が 0 でなければ、最上位の桁は 0 以外である。 最下位の桁"
2020 "は丸められる。 文字列には小数点は含まれない。そのかわりに、文字列の先頭からの"
2021 "小数点の 位置が I<*decpt> に保持される。 I<*decpt> が負の値の場合、小数点が文"
2022 "字列の先頭の左側にあることを意味する。 もし(I<number>の)符号が負ならば "
2023 "I<*sign> は 0 以外の値に、 そうでなければ 0 に設定される。 I<number> が 0 な"
2024 "ら、I<*decpt> が 0 か 1 かは未規定である。"
2027 #: build/C/man3/ecvt.3:99
2029 "The B<fcvt>() function is identical to B<ecvt>(), except that I<ndigits> "
2030 "specifies the number of digits after the decimal point."
2032 "関数 B<fcvt>() は B<ecvt>() と同じ機能を持つが、I<ndigits> は小数点以下の文"
2036 #: build/C/man3/ecvt.3:110
2038 "Both the B<ecvt>() and B<fcvt>() functions return a pointer to a static "
2039 "string containing the ASCII representation of I<number>. The static string "
2040 "is overwritten by each call to B<ecvt>() or B<fcvt>()."
2042 "関数 B<ecvt>() と B<fcvt>() は I<number> の ASCII 表現を含む 静的な領域内の"
2043 "文字列へのポインタを返す。 この文字列は B<ecvt>() や B<fcvt>() の呼び出しの"
2047 #: build/C/man3/ecvt.3:117
2048 msgid "The B<ecvt>() and B<fcvt>() functions are not thread-safe."
2049 msgstr "関数 B<ecvt>() と B<fcvt>() はスレッドセーフではない。"
2052 #: build/C/man3/ecvt.3:129
2054 "SVr2; marked as LEGACY in POSIX.1-2001. POSIX.1-2008 removes the "
2055 "specifications of B<ecvt>() and B<fcvt>(), recommending the use of "
2056 "B<sprintf>(3) instead (though B<snprintf>(3) may be preferable)."
2058 "SVr2。 POSIX.1-2001 では「過去の名残 (LEGACY)」と位置付けられている。 "
2059 "POSIX.1-2008 では B<ecvt>() と B<fcvt>() の仕様が削除され、代わりに "
2060 "B<sprintf>(3) の使用が推奨されている(しかし B<snprintf>(3) がより適切かもし"
2064 #: build/C/man3/ecvt.3:135
2066 "Linux libc4 and libc5 specified the type of I<ndigits> as I<size_t>. Not "
2067 "all locales use a point as the radix character (\"decimal point\")."
2069 "Linux libc4 と libc5 では I<ndigits> の型は I<size_t> となっていた。 小数点に"
2073 #: build/C/man3/ecvt.3:141
2074 msgid "B<ecvt_r>(3), B<gcvt>(3), B<qecvt>(3), B<setlocale>(3), B<sprintf>(3)"
2075 msgstr "B<ecvt_r>(3), B<gcvt>(3), B<qecvt>(3), B<setlocale>(3), B<sprintf>(3)"
2078 #: build/C/man3/ecvt_r.3:30
2084 #: build/C/man3/ecvt_r.3:33
2086 "ecvt_r, fcvt_r, qecvt_r, qfcvt_r - convert a floating-point number to a "
2088 msgstr "ecvt_r, fcvt_r, qecvt_r, qfcvt_r - 浮動小数点数の文字列への変換"
2091 #: build/C/man3/ecvt_r.3:39
2094 "B<int ecvt_r(double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,>\n"
2095 "B< int *>I<sign>B<, char *>I<buf>B<, size_t >I<len>B<);>\n"
2097 "B<int ecvt_r(double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,>\n"
2098 "B< int *>I<sign>B<, char *>I<buf>B<, size_t >I<len>B<);>\n"
2101 #: build/C/man3/ecvt_r.3:42
2104 "B<int fcvt_r(double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,>\n"
2105 "B< int *>I<sign>B<, char *>I<buf>B<, size_t >I<len>B<);>\n"
2107 "B<int fcvt_r(double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,>\n"
2108 "B< int *>I<sign>B<, char *>I<buf>B<, size_t >I<len>B<);>\n"
2111 #: build/C/man3/ecvt_r.3:45
2114 "B<int qecvt_r(long double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,>\n"
2115 "B< int *>I<sign>B<, char *>I<buf>B<, size_t >I<len>B<);>\n"
2117 "B<int qecvt_r(long double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,>\n"
2118 "B< int *>I<sign>B<, char *>I<buf>B<, size_t >I<len>B<);>\n"
2121 #: build/C/man3/ecvt_r.3:48
2124 "B<int qfcvt_r(long double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,>\n"
2125 "B< int *>I<sign>B<, char *>I<buf>B<, size_t >I<len>B<);>\n"
2127 "B<int qfcvt_r(long double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,>\n"
2128 "B< int *>I<sign>B<, char *>I<buf>B<, size_t >I<len>B<);>\n"
2131 #: build/C/man3/ecvt_r.3:60
2132 msgid "B<ecvt_r>(), B<fcvt_r>(), B<qecvt_r>(), B<qfcvt_r>():"
2133 msgstr "B<ecvt_r>(), B<fcvt_r>(), B<qecvt_r>(), B<qfcvt_r>():"
2136 #: build/C/man3/ecvt_r.3:62
2137 msgid "_SVID_SOURCE || _BSD_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500"
2138 msgstr "_SVID_SOURCE || _BSD_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500"
2141 #: build/C/man3/ecvt_r.3:86
2143 "The functions B<ecvt_r>(), B<fcvt_r>(), B<qecvt_r>() and B<qfcvt_r>() are "
2144 "identical to B<ecvt>(3), B<fcvt>(3), B<qecvt>(3) and B<qfcvt>(3), "
2145 "respectively, except that they do not return their result in a static "
2146 "buffer, but instead use the supplied I<buf> of size I<len>. See B<ecvt>(3) "
2149 "関数 B<ecvt_r>(), B<fcvt_r>(), B<qecvt_r>(), B<qfcvt_r>() は、それぞれ "
2150 "B<ecvt>(3), B<fcvt>(3), B<qecvt>(3), B<qfcvt>(3) と同じであるが、 静的バッ"
2151 "ファの代わりに、長さ I<len> の指定された I<buf> に結果を格納する点が異なる。 "
2152 "B<ecvt>(3), B<qecvt>(3) を参照のこと。"
2155 #: build/C/man3/ecvt_r.3:88
2156 msgid "These functions return 0 on success, and -1 otherwise."
2157 msgstr "これらの関数は成功すると 0 を、それ以外は -1 を返す。"
2160 #: build/C/man3/ecvt_r.3:90
2161 msgid "These functions are GNU extensions."
2162 msgstr "これらの関数は GNU による拡張である。"
2165 #: build/C/man3/ecvt_r.3:95 build/C/man3/qecvt.3:94
2166 msgid "These functions are obsolete. Instead, B<sprintf>(3) is recommended."
2167 msgstr "これらの関数は廃止された。代わりに B<sprintf>(3) の使用を推奨する。"
2170 #: build/C/man3/ecvt_r.3:99
2171 msgid "B<ecvt>(3), B<qecvt>(3), B<sprintf>(3)"
2172 msgstr "B<ecvt>(3), B<qecvt>(3), B<sprintf>(3)"
2175 #: build/C/man3/exit.3:29
2181 #: build/C/man3/exit.3:29
2187 #: build/C/man3/exit.3:32
2188 msgid "exit - cause normal process termination"
2189 msgstr "exit - プロセスの正常終了"
2192 #: build/C/man3/exit.3:37
2194 msgid "B<void exit(int >I<status>B<);>\n"
2195 msgstr "B<void exit(int >I<status>B<);>\n"
2198 #: build/C/man3/exit.3:45
2200 "The B<exit>() function causes normal process termination and the value of "
2201 "I<status & 0377> is returned to the parent (see B<wait>(2))."
2203 "B<exit>() 関数は、プロセスを正常に終了させ、 I<status & 0377> という値を親プ"
2204 "ロセスへ返す (B<wait>(2) を参照)。"
2207 #: build/C/man3/exit.3:72
2209 "All functions registered with B<atexit>(3) and B<on_exit>(3) are called, "
2210 "in the reverse order of their registration. (It is possible for one of "
2211 "these functions to use B<atexit>(3) or B<on_exit>(3) to register an "
2212 "additional function to be executed during exit processing; the new "
2213 "registration is added to the front of the list of functions that remain to "
2214 "be called.) If one of these functions does not return (e.g., it calls "
2215 "B<_exit>(2), or kills itself with a signal), then none of the remaining "
2216 "functions is called, and further exit processing (in particular, flushing of "
2217 "B<stdio>(3) streams) is abandoned. If a function has been registered "
2218 "multiple times using B<atexit>(3) or B<on_exit>(3), then it is called as "
2219 "many times as it was registered."
2221 "B<atexit>(3) や B<on_exit>(3) によって 登録された全ての関数は、それらが登録"
2222 "された順番と逆順にコールされる。 (登録された関数の中で B<atexit>(3) or "
2223 "B<on_exit>(3) を使って exit 処理中に実行される追加の関数を登録することができ"
2224 "る; 新規に登録された関数は、この後で実行される関数リストの先頭に 追加され"
2225 "る。) これらの関数の一つが返らなかった場合 (例えば、その関数が B<_exit>(2) "
2226 "を呼び出したり、シグナルで自分自身を kill した場合)、 残りの関数はどれも呼び"
2227 "出されず、それ以降の exit 処理 (特に B<stdio>(3) ストリームのフラッシュな"
2228 "ど) は中止される。 ある関数が B<atexit>(3) や B<on_exit>(3) を使って複数回"
2229 "登録されていた場合、 その関数は登録されたのと同じ回数だけ呼び出される。"
2232 #: build/C/man3/exit.3:79
2234 "All open B<stdio>(3) streams are flushed and closed. Files created by "
2235 "B<tmpfile>(3) are removed."
2237 "オープン中の B<stdio>(3) ストリームは全てフラッシュされて、クローズされる。 "
2238 "B<tmpfile>(3) によって作成されたファイルは削除される。"
2241 #: build/C/man3/exit.3:86
2243 "The C standard specifies two constants, B<EXIT_SUCCESS> and B<EXIT_FAILURE>, "
2244 "that may be passed to B<exit>() to indicate successful or unsuccessful "
2245 "termination, respectively."
2247 "C 標準では B<EXIT_SUCCESS> と B<EXIT_FAILURE> という 2つの定数が 定義されてい"
2248 "る。それぞれ正常終了と異常終了を示すもので、 B<exit>() として渡すことができ"
2252 #: build/C/man3/exit.3:90
2253 msgid "The B<exit>() function does not return."
2254 msgstr "B<exit>() 関数は返らない。"
2257 #: build/C/man3/exit.3:92
2258 msgid "SVr4, 4.3BSD, POSIX.1-2001, C89, C99."
2259 msgstr "SVr4, 4.3BSD, POSIX.1-2001, C89, C99."
2262 #: build/C/man3/exit.3:109
2264 "It is undefined what happens if one of the functions registered using "
2265 "B<atexit>(3) and B<on_exit>(3) calls either B<exit>() or B<longjmp>(3). "
2266 "Note that a call to B<execve>(2) removes registrations created using "
2267 "B<atexit>(3) and B<on_exit>(3)."
2269 "B<atexit>(3) や B<on_exit>(3) を使って登録された関数の中で B<exit>() か "
2270 "B<longjmp>(3) が呼び出された場合、 何が起こるかは未定義である。 B<execve>"
2271 "(2) を呼び出すと、 B<atexit>(3) や B<on_exit>(3) を使って登録された関数が削除"
2275 #: build/C/man3/exit.3:118
2277 "The use of B<EXIT_SUCCESS> and B<EXIT_FAILURE> is slightly more portable (to "
2278 "non-UNIX environments) than the use of 0 and some nonzero value like 1 or "
2279 "-1. In particular, VMS uses a different convention."
2281 "B<EXIT_SUCCESS> と B<EXIT_FAILURE> を使うと、0 や (1 や -1 といった) 0 以外の"
2282 "値を使うのに比べて (UNIX 以外の環境に) 移植するのがいくらか簡単になる。 特に "
2286 #: build/C/man3/exit.3:121
2288 "BSD has attempted to standardize exit codes; see the file I<E<lt>sysexits."
2291 "BSD は終了コードを標準化しようとしている; I<E<lt>sysexits.hE<gt>> を参照する"
2295 #: build/C/man3/exit.3:146
2297 "After B<exit>(), the exit status must be transmitted to the parent process. "
2298 "There are three cases. If the parent has set B<SA_NOCLDWAIT>, or has set "
2299 "the B<SIGCHLD> handler to B<SIG_IGN>, the status is discarded. If the "
2300 "parent was waiting on the child it is notified of the exit status. In both "
2301 "cases the exiting process dies immediately. If the parent has not indicated "
2302 "that it is not interested in the exit status, but is not waiting, the "
2303 "exiting process turns into a \"zombie\" process (which is nothing but a "
2304 "container for the single byte representing the exit status) so that the "
2305 "parent can learn the exit status when it later calls one of the B<wait>(2) "
2308 "B<exit>() の後、親プロセスに終了ステータスが渡されなければならない。 終了ス"
2309 "テータスの渡し方には 3 つの場合がある。 親プロセスが B<SA_NOCLDWAIT> を設定し"
2310 "た場合、 または B<SIGCHLD> ハンドラを B<SIG_IGN> に設定した場合、 ステータス"
2311 "は破棄される。 親プロセスが子プロセスの終了を待っている場合、 親プロセスに終"
2312 "了ステータスが伝えられる。 どちらの場合でも exit のプロセスは直ちに終了す"
2313 "る。 「終了ステータスを関知せず終了も待たない」 ということを親プロセスが指示"
2314 "していない場合、 exit プロセスは (終了ステータスを表す 1 バイトのみを保持す"
2315 "る) 「ゾンビ」プロセスになる。 これにより、後から B<wait>(2) 関数を呼び出す"
2316 "ことで、 親プロセスは終了ステータスを知ることができる。"
2319 #: build/C/man3/exit.3:156
2321 "If the implementation supports the B<SIGCHLD> signal, this signal is sent to "
2322 "the parent. If the parent has set B<SA_NOCLDWAIT>, it is undefined whether "
2323 "a B<SIGCHLD> signal is sent."
2325 "B<SIGCHLD> シグナルのサポートが実装されている場合、 このシグナルは親プロセス"
2326 "に送られる。 親プロセスが B<SA_NOCLDWAIT> を設定した場合、 B<SIGCHLD> シグナ"
2327 "ルが送られるかどうかは定義されていない。"
2330 #: build/C/man3/exit.3:165
2332 "If the process is a session leader and its controlling terminal is the "
2333 "controlling terminal of the session, then each process in the foreground "
2334 "process group of this controlling terminal is sent a B<SIGHUP> signal, and "
2335 "the terminal is disassociated from this session, allowing it to be acquired "
2336 "by a new controlling process."
2338 "そのプロセスがセッションのリーダーで、 そのプロセスの制御端末がそのセッション"
2339 "の制御端末である場合、 この制御端末のフォアグラウンドプロセスグループにある "
2340 "各プロセスに B<SIGHUP> シグナルが送られ、端末がセッションから切り離される。 "
2341 "これにより新しい制御プロセスを取得することができる。"
2344 #: build/C/man3/exit.3:177
2346 "If the exit of the process causes a process group to become orphaned, and if "
2347 "any member of the newly orphaned process group is stopped, then a B<SIGHUP> "
2348 "signal followed by a B<SIGCONT> signal will be sent to each process in this "
2349 "process group. See B<setpgid>(2) for an explanation of orphaned process "
2352 "プロセスが終了することにより、プロセスグループが孤立して、 そのグループのメン"
2353 "バーのうちのどれかが停止した場合、 プロセスグループの各プロセスに対して "
2354 "B<SIGHUP> シグナルが送られ、続いて B<SIGCONT> シグナルが送られる。 孤立した "
2355 "(orphaned) プロセスグループの説明は B<setpgid>(2) を参照。"
2358 #: build/C/man3/exit.3:184
2360 "B<_exit>(2), B<setpgid>(2), B<wait>(2), B<atexit>(3), B<on_exit>(3), "
2363 "B<_exit>(2), B<setpgid>(2), B<wait>(2), B<atexit>(3), B<on_exit>(3), "
2367 #: build/C/man3/gcvt.3:30
2373 #: build/C/man3/gcvt.3:33
2374 msgid "gcvt - convert a floating-point number to a string"
2375 msgstr "gcvt - 浮動小数点数を文字列へ変換する"
2378 #: build/C/man3/gcvt.3:38
2380 msgid "B<char *gcvt(double >I<number>B<, size_t >I<ndigit>B<, char *>I<buf>B<);>\n"
2381 msgstr "B<char *gcvt(double >I<number>B<, size_t >I<ndigit>B<, char *>I<buf>B<);>\n"
2384 #: build/C/man3/gcvt.3:46
2389 #: build/C/man3/gcvt.3:61
2391 "_SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || _XOPEN_SOURCE && "
2392 "_XOPEN_SOURCE_EXTENDED"
2394 "_SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || _XOPEN_SOURCE && "
2395 "_XOPEN_SOURCE_EXTENDED"
2398 #: build/C/man3/gcvt.3:72
2400 "The B<gcvt>() function converts I<number> to a minimal length null-"
2401 "terminated ASCII string and stores the result in I<buf>. It produces "
2402 "I<ndigit> significant digits in either B<printf>(3) F format or E format."
2404 "関数 B<gcvt>() は、 I<number> を、最短の長さの NULL 終端された ASCII 文字列"
2405 "へ変換し、変換後の文字列を I<buf> に格納する。 B<printf>(3) の F フォーマッ"
2406 "トや E フォーマットのように I<ndigit> 桁の 有効数字を生成する。"
2409 #: build/C/man3/gcvt.3:77
2411 "The B<gcvt>() function returns the address of the string pointed to by "
2413 msgstr "関数 B<gcvt>() は文字列 I<buf> へのポインタを返す。"
2416 #: build/C/man3/gcvt.3:86
2418 "Marked as LEGACY in POSIX.1-2001. POSIX.1-2008 removes the specification of "
2419 "B<gcvt>(), recommending the use of B<sprintf>(3) instead (though B<snprintf>"
2420 "(3) may be preferable)."
2422 "POSIX.1-2001 では、 この関数は「過去の名残 (LEGACY)」と位置付けられている。 "
2423 "POSIX.1-2008 では、 B<gcvt>() の仕様は削除され、 代わりに B<sprintf>(3) を"
2424 "使用することが推奨されている (B<snprintf>(3) の方が適切かもしれないが)。"
2427 #: build/C/man3/gcvt.3:90
2428 msgid "B<ecvt>(3), B<fcvt>(3), B<sprintf>(3)"
2429 msgstr "B<ecvt>(3), B<fcvt>(3), B<sprintf>(3)"
2432 #: build/C/man3/getauxval.3:27
2438 #: build/C/man3/getauxval.3:27
2444 #: build/C/man3/getauxval.3:30
2445 msgid "getauxval - retrieve a value from the auxiliary vector"
2449 #: build/C/man3/getauxval.3:33
2451 msgid "B<#include E<lt>sys/auxv.hE<gt>>\n"
2452 msgstr "B<#include E<lt>sys/auxv.hE<gt>>\n"
2455 #: build/C/man3/getauxval.3:35
2457 msgid "B<unsigned long getauxval(unsigned long >I<type>B<);>\n"
2458 msgstr "B<unsigned long getauxval(unsigned long >I<type>B<);>\n"
2461 #: build/C/man3/getauxval.3:43
2463 "The B<getauxval>() function retrieves values from the auxiliary vector, a "
2464 "mechanism that the kernel's ELF binary loader uses to pass certain "
2465 "information to user space when a program is executed."
2469 #: build/C/man3/getauxval.3:51
2471 "Each entry in the auxiliary vector consists of a pair of values: a type that "
2472 "identifies what this entry represents, and a value for that type. Given the "
2473 "argument I<type>, B<getauxval>() returns the corresponding value."
2477 #: build/C/man3/getauxval.3:58
2479 "The value returned for each I<type> is given in the following list. Not all "
2480 "I<type> values are present on all architectures."
2484 #: build/C/man3/getauxval.3:58
2490 #: build/C/man3/getauxval.3:61
2492 "The base address of the program interpreter (usually, the dynamic linker)."
2496 #: build/C/man3/getauxval.3:61
2498 msgid "B<AT_BASE_PLATFORM>"
2499 msgstr "B<AT_BASE_PLATFORM>"
2502 #: build/C/man3/getauxval.3:66
2504 "A string identifying the real platform; may differ from B<AT_PLATFORM> "
2509 #: build/C/man3/getauxval.3:66
2511 msgid "B<AT_CLKTCK>"
2512 msgstr "B<AT_CLKTCK>"
2515 #: build/C/man3/getauxval.3:73
2517 "The frequency with which B<times>(2) counts. This value can also be "
2518 "obtained via I<sysconf(_SC_CLK_TCK)>."
2522 #: build/C/man3/getauxval.3:73
2524 msgid "B<AT_DCACHEBSIZE>"
2525 msgstr "B<AT_DCACHEBSIZE>"
2528 #: build/C/man3/getauxval.3:76
2529 msgid "The data cache block size."
2533 #: build/C/man3/getauxval.3:76
2539 #: build/C/man3/getauxval.3:79
2540 msgid "The effective group ID of the thread."
2544 #: build/C/man3/getauxval.3:79
2547 msgstr "B<AT_ENTRY>"
2550 #: build/C/man3/getauxval.3:82
2551 msgid "The entry address of the executable."
2555 #: build/C/man3/getauxval.3:82
2561 #: build/C/man3/getauxval.3:85
2562 msgid "The effective user ID of the thread."
2566 #: build/C/man3/getauxval.3:85
2568 msgid "B<AT_EXECFD>"
2569 msgstr "B<AT_EXECFD>"
2572 #: build/C/man3/getauxval.3:88
2573 msgid "File descriptor of program."
2577 #: build/C/man3/getauxval.3:88
2579 msgid "B<AT_EXECFN>"
2580 msgstr "B<AT_EXECFN>"
2583 #: build/C/man3/getauxval.3:91
2584 msgid "Pathname used to execute program."
2588 #: build/C/man3/getauxval.3:91
2591 msgstr "B<AT_FLAGS>"
2594 #: build/C/man3/getauxval.3:94
2595 msgid "Flags (unused)."
2599 #: build/C/man3/getauxval.3:94
2602 msgstr "B<AT_FPUCW>"
2605 #: build/C/man3/getauxval.3:99
2607 "Used FPU control word (SuperH architecture only). This gives some "
2608 "information about the FPU initialization performed by the kernel."
2612 #: build/C/man3/getauxval.3:99
2618 #: build/C/man3/getauxval.3:102
2619 msgid "The real group ID of the thread."
2623 #: build/C/man3/getauxval.3:102
2626 msgstr "B<AT_HWCAP>"
2629 #: build/C/man3/getauxval.3:112
2631 "A pointer to a multibyte mask of bits whose settings indicate detailed "
2632 "processor capabilities. The contents of the bit mask are hardware dependent "
2633 "(for example, see the kernel source file I<arch/x86/include/asm/cpufeature."
2634 "h> for details relating to the Intel x86 architecture). A human-readable "
2635 "version of the same information is available via I</proc/cpuinfo>."
2639 #: build/C/man3/getauxval.3:112
2641 msgid "B<AT_ICACHEBSIZE>"
2642 msgstr "B<AT_ICACHEBSIZE>"
2651 #: build/C/man3/getauxval.3:121
2652 msgid "The instruction cache block size."
2656 #: build/C/man3/getauxval.3:121
2658 msgid "B<AT_PAGESZ>"
2659 msgstr "B<AT_PAGESZ>"
2662 #: build/C/man3/getauxval.3:125
2664 "The system page size (the same value returned by I<sysconf(_SC_PAGESIZE)>)."
2668 #: build/C/man3/getauxval.3:125
2674 #: build/C/man3/getauxval.3:128
2675 msgid "The address of the program headers of the executable."
2679 #: build/C/man3/getauxval.3:128
2682 msgstr "B<AT_PHENT>"
2685 #: build/C/man3/getauxval.3:131
2686 msgid "The size of program header entry."
2690 #: build/C/man3/getauxval.3:131
2693 msgstr "B<AT_PHNUM>"
2696 #: build/C/man3/getauxval.3:134
2697 msgid "The number of program headers."
2701 #: build/C/man3/getauxval.3:134
2703 msgid "B<AT_PLATFORM>"
2704 msgstr "B<AT_PLATFORM>"
2707 #: build/C/man3/getauxval.3:141
2709 "A pointer to a string that identifies the hardware platform that the program "
2710 "is running on. The dynamic linker uses this in the interpretation of "
2715 #: build/C/man3/getauxval.3:141
2717 msgid "B<AT_RANDOM>"
2718 msgstr "B<AT_RANDOM>"
2721 #: build/C/man3/getauxval.3:144
2722 msgid "The address of sixteen bytes containing a random value."
2726 #: build/C/man3/getauxval.3:144
2728 msgid "B<AT_SECURE>"
2729 msgstr "B<AT_SECURE>"
2732 #: build/C/man3/getauxval.3:156
2734 "Has a nonzero value if this executable should be treated securely. Most "
2735 "commonly, a nonzero value indicates that the process is executing a set-user-"
2736 "ID or set-group-ID program; alternatively, a nonzero value may be triggered "
2737 "by a Linux Security Module. When this value is nonzero, the dynamic linker "
2738 "disables the use of certain environment variables (see B<ld-linux.so>(8)) "
2739 "and glibc changes other aspects of its behavior. (See also B<secure_getenv>"
2744 #: build/C/man3/getauxval.3:156
2746 msgid "B<AT_SYSINFO>"
2747 msgstr "B<AT_SYSINFO>"
2750 #: build/C/man3/getauxval.3:160
2752 "The entry point to the system call function in the VDSO. Not present/needed "
2753 "on all architectures (e.g., absent on x86-64)."
2757 #: build/C/man3/getauxval.3:160
2759 msgid "B<AT_SYSINFO_EHDR>"
2760 msgstr "B<AT_SYSINFO_EHDR>"
2763 #: build/C/man3/getauxval.3:165
2765 "The address of a page containing the Virtual Dynamic Shared Object (VDSO) "
2766 "that the kernel creates in order to provide fast implementations of certain "
2771 #: build/C/man3/getauxval.3:165
2773 msgid "B<AT_UCACHEBSIZE>"
2774 msgstr "B<AT_UCACHEBSIZE>"
2777 #: build/C/man3/getauxval.3:168
2778 msgid "The unified cache block size."
2782 #: build/C/man3/getauxval.3:168
2788 #: build/C/man3/getauxval.3:171
2789 msgid "The real user ID of the thread."
2793 #: build/C/man3/getauxval.3:179
2795 "On success, B<getauxval>() returns the value corresponding to I<type>. If "
2796 "I<type> is not found, 0 is returned."
2798 "成功すると、 B<getauxval>() は I<type> に対応する値を返す。 I<type> が見つか"
2802 #: build/C/man3/getauxval.3:181
2803 msgid "No errors are diagnosed."
2804 msgstr "エラーは検出されない。"
2807 #: build/C/man3/getauxval.3:185
2808 msgid "The B<getauxval>() function was added to glibc in version 2.16."
2809 msgstr "B<getauxval>() 関数は glibc バージョン 2.16 で追加された。"
2812 #: build/C/man3/getauxval.3:187
2813 msgid "This function is a nonstandard glibc extension."
2814 msgstr "この関数は非標準で glibc による拡張である。"
2817 #: build/C/man3/getauxval.3:196
2819 "The primary consumer of the information in the auxiliary vector is the "
2820 "dynamic linker B<ld-linux.so>(8). The auxiliary vector is a convenient and "
2821 "efficient shortcut that allows the kernel to communicate a certain set of "
2822 "standard information that the dynamic linker usually or always needs. In "
2823 "some cases, the same information could be obtained by system calls, but "
2824 "using the auxiliary vector is cheaper."
2828 #: build/C/man3/getauxval.3:202
2830 "The auxiliary vector resides just above the argument list and environment in "
2831 "the process address space. The auxiliary vector supplied to a program can "
2832 "be viewed by setting the B<LD_SHOW_AUXV> environment variable when running a "
2837 #: build/C/man3/getauxval.3:204
2839 msgid " $ LD_SHOW_AUXV=1 sleep 1\n"
2840 msgstr " $ LD_SHOW_AUXV=1 sleep 1\n"
2843 #: build/C/man3/getauxval.3:211
2845 "The auxiliary vector of any process can (subject to file permissions) be "
2846 "obtained via I</proc/PID/auxv>; see B<proc>(5) for more information."
2850 #: build/C/man3/getauxval.3:214
2851 msgid "B<secure_getenv>(3), B<ld-linux.so>(8)"
2852 msgstr "B<secure_getenv>(3), B<ld-linux.so>(8)"
2855 #: build/C/man3/getauxval.3:217
2856 msgid "The kernel source file I<Documentation/ABI/stable/vdso>"
2860 #: build/C/man3/getenv.3:33
2866 #: build/C/man3/getenv.3:33
2872 #: build/C/man3/getenv.3:36
2873 msgid "getenv, secure_getenv - get an environment variable"
2874 msgstr "getenv, secure_getenv - 環境変数を得る"
2877 #: build/C/man3/getenv.3:41
2879 msgid "B<char *getenv(const char *>I<name>B<);>\n"
2880 msgstr "B<char *getenv(const char *>I<name>B<);>\n"
2883 #: build/C/man3/getenv.3:43
2885 msgid "B<char *secure_getenv(const char *>I<name>B<);>\n"
2886 msgstr "B<char *secure_getenv(const char *>I<name>B<);>\n"
2889 #: build/C/man3/getenv.3:52
2890 msgid "B<secure_getenv>(): _GNU_SOURCE"
2891 msgstr "B<secure_getenv>(): _GNU_SOURCE"
2894 #: build/C/man3/getenv.3:61
2896 "The B<getenv>() function searches the environment list to find the "
2897 "environment variable I<name>, and returns a pointer to the corresponding "
2900 "関数 B<getenv>() は、環境リストから名前が I<name> の環境変数を検索し、対応す"
2901 "る I<value> 文字列へのポインタを返す。"
2904 #: build/C/man3/getenv.3:69
2906 "The GNU-specific B<secure_getenv>() function is just like B<getenv>() "
2907 "except that it returns NULL in cases where \"secure execution\" is "
2908 "required. Secure execution is required if one of the following conditions "
2909 "was true when the program run by the calling process was loaded:"
2911 "GNU 固有の B<secure_getenv>() 関数は B<getenv>() と同様だが、 \"secure "
2912 "execution\" (「安全な実行」) が必要な場合には NULL を返す点が異なる。 "
2913 "\"secure execution\" が必要となるのは、 呼び出し元プロセスにより実行されるプ"
2914 "ログラムがロードされる際に、 以下の条件のいずれか一つが成立する場合である。"
2917 #: build/C/man3/getenv.3:69 build/C/man3/getenv.3:74 build/C/man3/getenv.3:76
2923 #: build/C/man3/getenv.3:74
2925 "the process's effective user ID did not match its real user ID or the "
2926 "process's effective group ID did not match its real group ID (typically this "
2927 "is the result of executing a set-user-ID or set-group-ID program);"
2929 "プロセスの実効ユーザ ID がプロセスの実ユーザ ID と一致しない場合、またはプロ"
2930 "セスの実効グループ ID がプロセスの実グループ ID と一致しない場合 (通常、この"
2931 "状況になるのは、 set-user-ID プログラムか set-group-ID プログラムを実行した場"
2935 #: build/C/man3/getenv.3:76
2936 msgid "the effective capability bit was set on the executable file; or"
2937 msgstr "実行ファイルで実効ケーパビリティビットがセットされている場合。"
2940 #: build/C/man3/getenv.3:78
2941 msgid "the process has a nonempty permitted capability set."
2942 msgstr "プロセスの許可ケーパビリティセットが空でない場合。"
2945 #: build/C/man3/getenv.3:81
2947 "Secure execution may also required if triggered by some Linux security "
2950 "Linux セキュリティモジュールにより要求された場合にも \"secure execution\" は"
2954 #: build/C/man3/getenv.3:88
2956 "The B<secure_getenv>() function is intended for use in general-purpose "
2957 "libraries to avoid vulnerabilities that could occur if set-user-ID or set-"
2958 "group-ID programs accidentally trusted the environment."
2960 "B<secure_getenv>() 関数は、 set-user-ID プログラムや set-group-ID プログラム"
2961 "が実行環境を偶然信用してしまった場合に起こり得る脆弱性を、 汎用ライブラリで回"
2962 "避するために使うことを意図して作られた。"
2965 #: build/C/man3/getenv.3:93
2967 "The B<getenv>() function returns a pointer to the value in the environment, "
2968 "or NULL if there is no match."
2970 "関数 B<getenv>() は、環境における値 value へのポインタを返す。 I<name> に"
2971 "マッチする環境変数が存在しないときには NULL を返す。"
2974 #: build/C/man3/getenv.3:96
2975 msgid "B<secure_getenv>() first appeared in glibc 2.17."
2976 msgstr "B<secure_getenv>() は glibc 2.17 で初めて登場した。"
2979 #: build/C/man3/getenv.3:99
2980 msgid "B<getenv>(): SVr4, POSIX.1-2001, 4.3BSD, C89, C99."
2981 msgstr "B<getenv>(): SVr4, POSIX.1-2001, 4.3BSD, C89, C99."
2984 #: build/C/man3/getenv.3:102
2985 msgid "B<secure_getenv>() is a GNU extension."
2986 msgstr "B<secure_getenv>() は GNU による拡張である。"
2989 #: build/C/man3/getenv.3:104
2990 msgid "The strings in the environment list are of the form I<name=value>."
2991 msgstr "環境リストの文字列は I<name=value> という形式をしている。"
2994 #: build/C/man3/getenv.3:110
2996 "As typically implemented, B<getenv>() returns a pointer to a string within "
2997 "the environment list. The caller must take care not to modify this string, "
2998 "since that would change the environment of the process."
3000 "通常の実装では、 B<getenv>() は環境リスト内の文字列へのポインタを返す。 呼び"
3001 "出し元はこの文字列を変更しないように注意しなければならない。 この文字列を変更"
3002 "すると、そのプロセスの環境を変化させることになるからである。"
3005 #: build/C/man3/getenv.3:123
3007 "The implementation of B<getenv>() is not required to be reentrant. The "
3008 "string pointed to by the return value of B<getenv>() may be statically "
3009 "allocated, and can be modified by a subsequent call to B<getenv>(), B<putenv>"
3010 "(3), B<setenv>(3), or B<unsetenv>(3)."
3012 "B<getenv>() の実装はリエントラント (再入可能) であることを要求されていな"
3013 "い。 B<getenv>() の返り値により参照される文字列は静的に割り当てられてもよ"
3014 "く、 文字列の内容は後続の B<getenv>(), B<putenv>(3), B<setenv>(3), "
3015 "B<unsetenv>(3) の呼び出しにより変更されることがある。"
3018 #: build/C/man3/getenv.3:129
3020 "The \"secure execution\" mode of B<secure_getenv>() is controlled by the "
3021 "B<AT_SECURE> flag contained in the auxiliary vector passed from the kernel "
3024 "B<secure_getenv>() の \"secure execution\" モードは、 カーネルからユーザ空間"
3025 "に渡される補助ベクトル (auxiliary vector) の B<AT_SECURE> フラグにより制御さ"
3029 #: build/C/man3/getenv.3:137
3031 "B<clearenv>(3), B<getauxval>(3), B<putenv>(3), B<setenv>(3), B<unsetenv>(3), "
3032 "B<capabilities>(7), B<environ>(7)"
3034 "B<clearenv>(3), B<getauxval>(3), B<putenv>(3), B<setenv>(3), B<unsetenv>(3), "
3035 "B<capabilities>(7), B<environ>(7)"
3038 #: build/C/man3/getloadavg.3:34
3044 #: build/C/man3/getloadavg.3:34
3050 #: build/C/man3/getloadavg.3:37
3051 msgid "getloadavg - get system load averages"
3052 msgstr "getloadavg - get system load averages"
3055 #: build/C/man3/getloadavg.3:41
3058 "B<#define _BSD_SOURCE> /* See feature_test_macros(7) */\n"
3059 "B<#include E<lt>stdlib.hE<gt>>\n"
3061 "B<#define _BSD_SOURCE> /* feature_test_macros(7) 参照 */\n"
3062 "B<#include E<lt>stdlib.hE<gt>>\n"
3065 #: build/C/man3/getloadavg.3:43
3067 msgid "B<int getloadavg(double >I<loadavg[]>B<, int >I<nelem>B<);>\n"
3068 msgstr "B<int getloadavg(double >I<loadavg[]>B<, int >I<nelem>B<);>\n"
3071 #: build/C/man3/getloadavg.3:55
3073 "The B<getloadavg>() function returns the number of processes in the system "
3074 "run queue averaged over various periods of time. Up to I<nelem> samples are "
3075 "retrieved and assigned to successive elements of I<loadavg>[]. The system "
3076 "imposes a maximum of 3 samples, representing averages over the last 1, 5, "
3077 "and 15 minutes, respectively."
3079 "B<getloadavg>() 関数はシステムの実行キューに入っているプロセスの数を、 様々"
3080 "な期間について平均した値を返す。 I<nelem> 個までのサンプル値を取得し、 "
3081 "I<loadavg>[] の連続する要素に代入する。 システムが提供するサンプル数は 3 個ま"
3082 "でで、 それぞれ最近 1, 5, 15 分の平均を表している。"
3087 #. function appeared in
3090 #: build/C/man3/getloadavg.3:63
3092 "If the load average was unobtainable, -1 is returned; otherwise, the number "
3093 "of samples actually retrieved is returned."
3095 "負荷平均が取得できないと -1 を返す。 取得できた場合は、実際に取得したサンプル"
3099 #: build/C/man3/getloadavg.3:65
3100 msgid "This function is available in glibc since version 2.2."
3101 msgstr "この関数は glibc のバージョン 2.2 以降で利用可能である。"
3103 #. mdoc seems to have a bug - there must be no newline here
3105 #: build/C/man3/getloadavg.3:69
3106 msgid "Not in POSIX.1-2001. Present on the BSDs and Solaris."
3107 msgstr "POSIX.1-2001 にはない。 BSD 系と Solaris に存在する。"
3110 #: build/C/man3/getloadavg.3:72
3111 msgid "B<uptime>(1), B<proc>(5)"
3112 msgstr "B<uptime>(1), B<proc>(5)"
3115 #: build/C/man3/getsubopt.3:25
3121 #: build/C/man3/getsubopt.3:25 build/C/man3/mkdtemp.3:26
3127 #: build/C/man3/getsubopt.3:28
3128 msgid "getsubopt - parse suboption arguments from a string"
3129 msgstr "getsubopt - 文字列中のサブオプション引き数の解釈を行う"
3132 #: build/C/man3/getsubopt.3:33
3134 "B<int getsubopt(char **>I<optionp>B<, char * const *>I<tokens>B<, char "
3137 "B<int getsubopt(char **>I<optionp>B<, char * const *>I<tokens>B<, char "
3141 #: build/C/man3/getsubopt.3:40
3142 msgid "B<getsubopt>():"
3143 msgstr "B<getsubopt>():"
3146 #: build/C/man3/getsubopt.3:45
3148 "_XOPEN_SOURCE\\ E<gt>= 500 || _XOPEN_SOURCE\\ &&\\ _XOPEN_SOURCE_EXTENDED"
3150 "_XOPEN_SOURCE\\ E<gt>= 500 || _XOPEN_SOURCE\\ &&\\ _XOPEN_SOURCE_EXTENDED"
3153 #: build/C/man3/getsubopt.3:47
3154 msgid "|| /* Since glibc 2.12: */ _POSIX_C_SOURCE\\ E<gt>=\\ 200809L"
3155 msgstr "|| /* Since glibc 2.12: */ _POSIX_C_SOURCE\\ E<gt>=\\ 200809L"
3158 #: build/C/man3/getsubopt.3:64
3160 "B<getsubopt>() parses the list of comma-separated suboptions provided in "
3161 "I<optionp>. (Such a suboption list is typically produced when B<getopt>(3) "
3162 "is used to parse a command line; see for example the I<-o> option of B<mount>"
3163 "(8).) Each suboption may include an associated value, which is separated "
3164 "from the suboption name by an equal sign. The following is an example of "
3165 "the kind of string that might be passed in I<optionp>:"
3167 "B<getsubopt>() は、 I<optionp> で与えられたカンマ区切りのサブオプション・リ"
3168 "ストを解析する。 (このようなサブオプション・リストは B<getopt>(3) を使ってコ"
3169 "マンドラインを解釈した場合に現れることが多い。 例えば、 B<mount>(8) の I<-"
3170 "o> オプションを見るとよい。) それぞれのサブオプションには対応する値を指定す"
3171 "ることができる。 サブオプションの名前と対応する値は等号 (\\(aq=\\(aq) で区切"
3172 "られる。 例えば、以下のような文字列を I<optionp> に渡すことができる。"
3175 #: build/C/man3/getsubopt.3:67
3176 msgid "B<ro,name=xyz>"
3177 msgstr "B<ro,name=xyz>"
3180 #: build/C/man3/getsubopt.3:77
3182 "The I<tokens> argument is a pointer to a NULL-terminated array of pointers "
3183 "to the tokens that B<getsubopt>() will look for in I<optionp>. The tokens "
3184 "should be distinct, null-terminated strings containing at least one "
3185 "character, with no embedded equal signs or commas."
3187 "I<tokens> 引き数はトークンへのポインタの配列へのポインタで、 配列は NULL で終"
3188 "端される。 B<getsubopt>() はこのトークンを I<optionp> 内で探す。 それぞれの"
3189 "トークンは、NULL 終端された 1文字以上の文字列で、 他のトークンと区別できる必"
3190 "要がある。 また、等号とカンマを含んではならない。"
3193 #: build/C/man3/getsubopt.3:98
3195 "Each call to B<getsubopt>() returns information about the next unprocessed "
3196 "suboption in I<optionp>. The first equal sign in a suboption (if any) is "
3197 "interpreted as a separator between the name and the value of that "
3198 "suboption. The value extends to the next comma, or (for the last suboption) "
3199 "to the end of the string. If the name of the suboption matches a known name "
3200 "from I<tokens>, and a value string was found, B<getsubopt>() sets "
3201 "I<*valuep> to the address of that string. The first comma in I<optionp> is "
3202 "overwritten with a null byte, so I<*valuep> is precisely the \"value string"
3203 "\" for that suboption."
3205 "B<getsubopt>() は呼び出されるたびに、 I<optionp> 中の次の未処理のサブオプ"
3206 "ションの情報を返す。 サブオプション内に等号があった場合、最初の等号は そのサ"
3207 "ブオプションの名前と値の区切りと解釈される。 区切りから次のカンマ (最後のサブ"
3208 "オプションの場合、文字列の末尾) までが、サブオプションの値となる。 サブオプ"
3209 "ションの名前が I<tokens> 内の名前と一致し、値を表す文字列が見つかった場合、 "
3210 "B<getsubopt>() は I<*valuep> を値を表す文字列のアドレスに設定する。 "
3211 "I<optionp> 中の最初のカンマはヌルバイトで上書きされる。そのため、 I<*valuep> "
3212 "はそのサブオプションの「値の文字列」そのものとなる。"
3215 #: build/C/man3/getsubopt.3:102
3217 "If the suboption is recognized, but no value string was found, I<*valuep> is "
3220 "サブオプションが認識されたが、値を表す文字列が見つからなかった場合、 "
3221 "*I<valuep> は NULL に設定される。"
3224 #: build/C/man3/getsubopt.3:110
3226 "When B<getsubopt>() returns, I<optionp> points to the next suboption, or to "
3227 "the null byte (\\(aq\\e0\\(aq) at the end of the string if the last "
3228 "suboption was just processed."
3230 "B<getsubopt>() が返る時、 I<optionp> は次のサブオプションを指している。 ちょ"
3231 "うど最後のサブオプションが処理された場合は、 文字列末尾のヌルバイト (\\(aq"
3232 "\\e0\\(aq) を指している。"
3235 #: build/C/man3/getsubopt.3:122
3237 "If the first suboption in I<optionp> is recognized, B<getsubopt>() returns "
3238 "the index of the matching suboption element in I<tokens>. Otherwise, -1 is "
3239 "returned and I<*valuep> is the entire I<name>B<[=>I<value>B<]> string."
3241 "I<optionp> 内でサブオプションが見つかった場合、 B<getsubopt>() は最初のサブ"
3242 "オプションにマッチする I<tokens> の要素の添字を返す。 見つからなかった場"
3243 "合、-1 を返す。この場合、 I<*valuep> は I<name>B<[=>I<value>B<]> の文字列全体"
3247 #: build/C/man3/getsubopt.3:129
3249 "Since I<*optionp> is changed, the first suboption before the call to "
3250 "B<getsubopt>() is not (necessarily) the same as the first suboption after "
3253 "I<*optionp> は変更されるので、 B<getsubopt>() を呼び出す前の最初のサブオプ"
3254 "ションは B<getsubopt>() を呼び出し後のサブオプションと必ずしも同じとは限らな"
3258 #: build/C/man3/getsubopt.3:138
3260 "Since B<getsubopt>() overwrites any commas it finds in the string "
3261 "I<*optionp>, that string must be writable; it cannot be a string constant."
3263 "B<getsubopt>() は、文字列 *I<optionp> 中に見つけたカンマを上書きするので、文"
3264 "字列 I<*optionp> は書き込み可能でなければならず、 文字列定数にすることはでき"
3268 #: build/C/man3/getsubopt.3:140
3269 msgid "The following program expects suboptions following a \"-o\" option."
3271 "以下のプログラムは \"-o\" オプションに続いてサブオプションがあることを 期待し"
3275 #: build/C/man3/getsubopt.3:146
3278 "#define _XOPEN_SOURCE 500\n"
3279 "#include E<lt>stdlib.hE<gt>\n"
3280 "#include E<lt>assert.hE<gt>\n"
3281 "#include E<lt>stdio.hE<gt>\n"
3283 "#define _XOPEN_SOURCE 500\n"
3284 "#include E<lt>stdlib.hE<gt>\n"
3285 "#include E<lt>assert.hE<gt>\n"
3286 "#include E<lt>stdio.hE<gt>\n"
3289 #: build/C/man3/getsubopt.3:163
3292 "int main(int argc, char **argv)\n"
3299 " char *const token[] = {\n"
3300 " [RO_OPT] = \"ro\",\n"
3301 " [RW_OPT] = \"rw\",\n"
3302 " [NAME_OPT] = \"name\",\n"
3309 "int main(int argc, char **argv)\n"
3316 " char *const token[] = {\n"
3317 " [RO_OPT] = \"ro\",\n"
3318 " [RW_OPT] = \"rw\",\n"
3319 " [NAME_OPT] = \"name\",\n"
3327 #: build/C/man3/getsubopt.3:168
3330 " int readonly = 0;\n"
3331 " int readwrite = 0;\n"
3332 " char *name = NULL;\n"
3333 " int errfnd = 0;\n"
3335 " int readonly = 0;\n"
3336 " int readwrite = 0;\n"
3337 " char *name = NULL;\n"
3338 " int errfnd = 0;\n"
3341 #: build/C/man3/getsubopt.3:174
3344 " while ((opt = getopt(argc, argv, \"o:\")) != -1) {\n"
3346 " case \\(aqo\\(aq:\n"
3347 " subopts = optarg;\n"
3348 " while (*subopts != \\(aq\\e0\\(aq && !errfnd) {\n"
3350 " while ((opt = getopt(argc, argv, \"o:\")) != -1) {\n"
3352 " case \\(aqo\\(aq:\n"
3353 " subopts = optarg;\n"
3354 " while (*subopts != \\(aq\\e0\\(aq && !errfnd) {\n"
3357 #: build/C/man3/getsubopt.3:179
3360 " switch (getsubopt(&subopts, token, &value)) {\n"
3365 " switch (getsubopt(&subopts, token, &value)) {\n"
3371 #: build/C/man3/getsubopt.3:183
3383 #: build/C/man3/getsubopt.3:191
3387 " if (value == NULL) {\n"
3388 " fprintf(stderr, \"Missing value for \"\n"
3389 " \"suboption \\(aq%s\\(aq\\en\", token[NAME_OPT]);\n"
3395 " if (value == NULL) {\n"
3396 " fprintf(stderr, \"Missing value for \"\n"
3397 " \"suboption \\(aq%s\\(aq\\en\", token[NAME_OPT]);\n"
3403 #: build/C/man3/getsubopt.3:194
3413 #: build/C/man3/getsubopt.3:208
3417 " fprintf(stderr, \"No match found \"\n"
3418 " \"for token: /%s/\\en\", value);\n"
3423 " if (readwrite && readonly) {\n"
3424 " fprintf(stderr, \"Only one of \\(aq%s\\(aq and \\(aq%s\\(aq can be \"\n"
3425 " \"specified\\en\", token[RO_OPT], token[RW_OPT]);\n"
3431 " fprintf(stderr, \"No match found \"\n"
3432 " \"for token: /%s/\\en\", value);\n"
3437 " if (readwrite && readonly) {\n"
3438 " fprintf(stderr, \"Only one of \\(aq%s\\(aq and \\(aq%s\\(aq can be \"\n"
3439 " \"specified\\en\", token[RO_OPT], token[RW_OPT]);\n"
3445 #: build/C/man3/getsubopt.3:213
3459 #: build/C/man3/getsubopt.3:220
3462 " if (errfnd || argc == 1) {\n"
3463 " fprintf(stderr, \"\\enUsage: %s -o E<lt>suboptstringE<gt>\\en\", argv[0]);\n"
3464 " fprintf(stderr, \"suboptions are \\(aqro\\(aq, \\(aqrw\\(aq, \"\n"
3465 " \"and \\(aqname=E<lt>valueE<gt>\\(aq\\en\");\n"
3466 " exit(EXIT_FAILURE);\n"
3469 " if (errfnd || argc == 1) {\n"
3470 " fprintf(stderr, \"\\enUsage: %s -o E<lt>suboptstringE<gt>\\en\", argv[0]);\n"
3471 " fprintf(stderr, \"suboptions are \\(aqro\\(aq, \\(aqrw\\(aq, \"\n"
3472 " \"and \\(aqname=E<lt>valueE<gt>\\(aq\\en\");\n"
3473 " exit(EXIT_FAILURE);\n"
3477 #: build/C/man3/getsubopt.3:222
3479 msgid " /* Remainder of program... */\n"
3480 msgstr " /* Remainder of program... */\n"
3483 #: build/C/man3/getsubopt.3:228
3484 msgid "B<getopt>(3)"
3485 msgstr "B<getopt>(3)"
3488 #: build/C/man3/malloc.3:30
3494 #: build/C/man3/malloc.3:30
3500 #: build/C/man3/malloc.3:33
3501 msgid "malloc, free, calloc, realloc - allocate and free dynamic memory"
3502 msgstr "malloc, free, calloc, realloc - 動的なメモリの割り当てと解放を行う"
3505 #: build/C/man3/malloc.3:41
3508 "B<void *malloc(size_t >I<size>B<);>\n"
3509 "B<void free(void >I<*ptr>B<);>\n"
3510 "B<void *calloc(size_t >I<nmemb>B<, size_t >I<size>B<);>\n"
3511 "B<void *realloc(void >I<*ptr>B<, size_t >I<size>B<);>\n"
3513 "B<void *malloc(size_t >I<size>B<);>\n"
3514 "B<void free(void >I<*ptr>B<);>\n"
3515 "B<void *calloc(size_t >I<nmemb>B<, size_t >I<size>B<);>\n"
3516 "B<void *realloc(void >I<*ptr>B<, size_t >I<size>B<);>\n"
3520 #: build/C/man3/malloc.3:58
3522 "The B<malloc>() function allocates I<size> bytes and returns a pointer to "
3523 "the allocated memory. I<The memory is not initialized>. If I<size> is 0, "
3524 "then B<malloc>() returns either NULL, or a unique pointer value that can "
3525 "later be successfully passed to B<free>()."
3527 "B<malloc>() 関数は I<size> バイトを割り当て、 割り当てられたメモリに対する\n"
3528 "ポインタを返す。I<メモリの内容は初期化されない>。 I<size> が 0 の場合、\n"
3529 "B<malloc>() は NULL または B<free>() に後で渡しても問題の起こらない\n"
3533 #: build/C/man3/malloc.3:74
3535 "The B<free>() function frees the memory space pointed to by I<ptr>, which "
3536 "must have been returned by a previous call to B<malloc>(), B<calloc>() or "
3537 "B<realloc>(). Otherwise, or if I<free(ptr)> has already been called before, "
3538 "undefined behavior occurs. If I<ptr> is NULL, no operation is performed."
3540 "B<free>() 関数はポインタ I<ptr> が指すメモリ空間を解放する。このポインタ"
3542 "以前に呼び出された B<malloc>(), B<calloc>(), B<realloc>() のいずれかが返した"
3544 "なければならない。これ以外のポインタを指定したり、すでに I<free(ptr)> が実"
3546 "されていたりした場合の動作は定義されていない。\n"
3547 "I<ptr> が NULL の場合には、何の動作も行われない。"
3551 #: build/C/man3/malloc.3:93
3553 "The B<calloc>() function allocates memory for an array of I<nmemb> elements "
3554 "of I<size> bytes each and returns a pointer to the allocated memory. The "
3555 "memory is set to zero. If I<nmemb> or I<size> is 0, then B<calloc>() "
3556 "returns either NULL, or a unique pointer value that can later be "
3557 "successfully passed to B<free>()."
3559 "B<calloc>() 関数は I<size> バイトの要素 I<nmemb> 個からなる配列にメモリを\n"
3560 "割り当て、割り当てられたメモリに対するポインタを返す。 メモリの内容は数値ゼ"
3562 "(全ビットが 0 のバイト) にセットされる。 I<nmemb> か I<size> が 0 の場合、\n"
3563 "B<calloc>() は NULL または B<free>() に後で渡しても問題の起こらない一意な\n"
3567 #: build/C/man3/malloc.3:129
3569 "The B<realloc>() function changes the size of the memory block pointed to "
3570 "by I<ptr> to I<size> bytes. The contents will be unchanged in the range "
3571 "from the start of the region up to the minimum of the old and new sizes. If "
3572 "the new size is larger than the old size, the added memory will I<not> be "
3573 "initialized. If I<ptr> is NULL, then the call is equivalent to I<malloc"
3574 "(size)>, for all values of I<size>; if I<size> is equal to zero, and I<ptr> "
3575 "is not NULL, then the call is equivalent to I<free(ptr)>. Unless I<ptr> is "
3576 "NULL, it must have been returned by an earlier call to B<malloc>(), B<calloc>"
3577 "() or B<realloc>(). If the area pointed to was moved, a I<free(ptr)> is "
3580 "B<realloc>() は、ポインタ I<ptr> が示すメモリブロックのサイズを I<size> バイ"
3582 "に変更する。領域の先頭から、新旧のサイズの小さい方の位置までの範囲の内容は\n"
3583 "変更されない。新しいサイズが前のサイズよりも大きい場合、追加されたメモリは\n"
3585 "I<ptr> が NULL の場合には I<malloc(size)> と等価である。\n"
3586 "I<size> が 0 で I<ptr> が NULL でない場合には、 I<free(ptr)> と等価である。\n"
3587 "I<ptr> が NULL 以外の場合、 I<ptr> は以前に呼び出された B<malloc>(), "
3589 "B<realloc>() のいずれかが返した値でなければならない。\n"
3590 "I<ptr> が指す領域が移動されていた場合は I<free(ptr)> が実行される。"
3593 #: build/C/man3/malloc.3:149
3595 "The B<malloc>() and B<calloc>() functions return a pointer to the "
3596 "allocated memory that is suitably aligned for any kind of variable. On "
3597 "error, these functions return NULL. NULL may also be returned by a "
3598 "successful call to B<malloc>() with a I<size> of zero, or by a successful "
3599 "call to B<calloc>() with I<nmemb> or I<size> equal to zero."
3601 "関数 B<calloc>() と B<malloc>() は、割り当てられたメモリへのポインタを返"
3603 "割り当てられたメモリは、あらゆる種類の変数に対応できるようにアラインメントさ"
3605 "エラーの場合、これらの関数は NULL を返す。\n"
3606 "I<size> が 0 で呼び出した B<malloc>() や、I<nmemb> か I<size> が 0 で呼び出し"
3608 "B<calloc>() が成功した場合にも NULL が返される。"
3611 #: build/C/man3/malloc.3:153
3612 msgid "The B<free>() function returns no value."
3613 msgstr "B<free>() 関数は値を返さない。"
3616 #: build/C/man3/malloc.3:168
3618 "The B<realloc>() function returns a pointer to the newly allocated memory, "
3619 "which is suitably aligned for any kind of variable and may be different from "
3620 "I<ptr>, or NULL if the request fails. If I<size> was equal to 0, either "
3621 "NULL or a pointer suitable to be passed to B<free>() is returned. If "
3622 "B<realloc>() fails the original block is left untouched; it is not freed or "
3625 "B<realloc>() 関数は新たに割り当てられたメモリへのポインタを返す。\n"
3626 "これはあらゆる種類の変数に対応できるようにアラインメントされており、\n"
3627 "I<ptr> とは異なることもある。割り当て要求に失敗した場合は NULL が返る。\n"
3628 "I<size> が 0 の場合には、NULL もしくは B<free>() に渡すことができるポインタが"
3630 "B<realloc>() が失敗した場合には、元のブロックは変更されない。\n"
3631 "つまり、解放されたり移動されたりはしない。"
3634 #: build/C/man3/malloc.3:170
3639 #: build/C/man3/malloc.3:186
3641 "By default, Linux follows an optimistic memory allocation strategy. This "
3642 "means that when B<malloc>() returns non-NULL there is no guarantee that the "
3643 "memory really is available. In case it turns out that the system is out of "
3644 "memory, one or more processes will be killed by the OOM killer. For more "
3645 "information, see the description of I</proc/sys/vm/overcommit_memory> and I</"
3646 "proc/sys/vm/oom_adj> in B<proc>(5), and the Linux kernel source file "
3647 "I<Documentation/vm/overcommit-accounting>."
3649 "デフォルトでは、Linux は楽観的メモリ配置戦略を用いている。つまり、\n"
3650 "B<malloc>() が NULL でない値を返しても、そのメモリが実際に利用可能であるこ"
3652 "が保証されない。システムがメモリ不足状態になったとき、メモリ不足解決器 (OOM\n"
3653 "killer) によって一つまたは複数のプロセスが削除される。\n"
3654 "詳しい情報は、B<proc>(5) の I</proc/sys/vm/overcommit_memory> と\n"
3655 "I<proc/sys/vm/oom_adj>、および Linux カーネルのソースファイルの\n"
3656 "I<Documentation/vm/overcommit-accounting> を参照のこと。"
3659 #: build/C/man3/malloc.3:207
3661 "Normally, B<malloc>() allocates memory from the heap, and adjusts the size "
3662 "of the heap as required, using B<sbrk>(2). When allocating blocks of memory "
3663 "larger than B<MMAP_THRESHOLD> bytes, the glibc B<malloc>() implementation "
3664 "allocates the memory as a private anonymous mapping using B<mmap>(2). "
3665 "B<MMAP_THRESHOLD> is 128 kB by default, but is adjustable using B<mallopt>"
3666 "(3). Allocations performed using B<mmap>(2) are unaffected by the "
3667 "B<RLIMIT_DATA> resource limit (see B<getrlimit>(2))."
3669 "通常、 B<malloc>() は、ヒープからメモリを割り当て、必要に応じてヒープのサイ"
3670 "ズを B<sbrk>(2) を使って調節する。 B<MMAP_THRESHOLD> バイトよりも大きなメモ"
3671 "リブロックを割り当てる場合、 glibc の B<malloc>() 実装は B<mmap>(2) を使っ"
3672 "てプライベートな無名マッピング (anonymous mapping) として メモリを割り当て"
3673 "る。 デフォルトでは B<MMAP_THRESHOLD> は 128 kB だが、 B<mallopt>(3) を使っ"
3674 "て調整できる。 B<mmap>(2) を使って行われたメモリ割り当ては B<RLIMIT_DATA> リ"
3675 "ソース上限の影響を受けない (B<getrlimit>(2) 参照)。"
3678 #: build/C/man3/malloc.3:225
3680 "To avoid corruption in multithreaded applications, mutexes are used "
3681 "internally to protect the memory-management data structures employed by "
3682 "these functions. In a multithreaded application in which threads "
3683 "simultaneously allocate and free memory, there could be contention for these "
3684 "mutexes. To scalably handle memory allocation in multithreaded "
3685 "applications, glibc creates additional I<memory allocation arenas> if mutex "
3686 "contention is detected. Each arena is a large region of memory that is "
3687 "internally allocated by the system (using B<brk>(2) or B<mmap>(2)), and "
3688 "managed with its own mutexes."
3690 "マルチスレッドアプリケーションでのデータ破損を回避するため、内部では mutex"
3692 "使用して、これらの関数で利用されるメモリ管理用のデータ構造を保護している。\n"
3693 "複数のスレッドが同時にメモリの確保や解放を行うようなマルチスレッドアプリ"
3695 "ションでは、これらの mutex の衝突が起こり得る。マルチスレッドアプリケーショ"
3697 "でのメモリ割り当て処理にスケーラビリティを持たせるために、glibc では mutex "
3699 "衝突が検出された際には追加の I<メモリ割り当て領域> を作成する。\n"
3700 "追加領域の各々は、(B<brk>(2) や B<mmap>(2) を使って) システムにより内部的に\n"
3701 "割り当てられた大きな領域で、それぞれ独自の mutex により管理されている。"
3704 #: build/C/man3/malloc.3:243
3706 "The UNIX 98 standard requires B<malloc>(), B<calloc>(), and B<realloc>() to "
3707 "set I<errno> to B<ENOMEM> upon failure. Glibc assumes that this is done "
3708 "(and the glibc versions of these routines do this); if you use a private "
3709 "malloc implementation that does not set I<errno>, then certain library "
3710 "routines may fail without having a reason in I<errno>."
3712 "UNIX 98 標準では、 B<malloc>(), B<calloc>(), B<realloc>() は実行に失敗したと"
3713 "きに I<errno> を B<ENOMEM> に設定することになっている。 Glibc ではこれが守ら"
3714 "れていることを仮定している (またこれらのルーチンの glibc バージョンはこのこと"
3715 "を守っている)。 個人的に別の malloc の実装を使っていて、その malloc が"
3716 "I<errno> を設定しない場合には、失敗した際に I<errno> にエラーの理由を設定しな"
3717 "いライブラリルーチンがあるかもしれない。"
3720 #: build/C/man3/malloc.3:252
3722 "Crashes in B<malloc>(), B<calloc>(), B<realloc>(), or B<free>() are almost "
3723 "always related to heap corruption, such as overflowing an allocated chunk or "
3724 "freeing the same pointer twice."
3726 "B<malloc>(), B<calloc>(), B<realloc>(), B<free>() における事故は、 ほとんど"
3727 "の場合はヒープの破壊 (corruption) が原因である。 例えば、割り当てられた領域を"
3728 "オーバーフローする、 同じポインタに二度 free する、などがこれにあたる。"
3731 #: build/C/man3/malloc.3:259
3733 "Recent versions of Linux libc (later than 5.4.23) and glibc (2.x) include a "
3734 "B<malloc>() implementation which is tunable via environment variables. For "
3735 "details, see B<mallopt>(3)."
3737 "Linux libc の新しいバージョン (5.4.23 より後) と glibc (2.x) には、\n"
3738 "環境変数で動作を調整できる B<malloc>() 実装が含まれている。\n"
3739 "詳細は B<mallopt>(3) を参照のこと。"
3742 #: build/C/man3/malloc.3:283
3744 "B<brk>(2), B<mmap>(2), B<alloca>(3), B<malloc_get_state>(3), B<malloc_info>"
3745 "(3), B<malloc_trim>(3), B<malloc_usable_size>(3), B<mallopt>(3), B<mcheck>"
3746 "(3), B<mtrace>(3), B<posix_memalign>(3)"
3748 "B<brk>(2), B<mmap>(2), B<alloca>(3), B<malloc_get_state>(3), B<malloc_info>"
3749 "(3), B<malloc_trim>(3), B<malloc_usable_size>(3), B<mallopt>(3), B<mcheck>"
3750 "(3), B<mtrace>(3), B<posix_memalign>(3)"
3753 #: build/C/man3/mblen.3:16
3759 #: build/C/man3/mblen.3:19
3760 msgid "mblen - determine number of bytes in next multibyte character"
3761 msgstr "mblen - 次のマルチバイト文字のバイト数を返す"
3764 #: build/C/man3/mblen.3:24
3766 msgid "B<int mblen(const char *>I<s>B<, size_t >I<n>B<);>\n"
3767 msgstr "B<int mblen(const char *>I<s>B<, size_t >I<n>B<);>\n"
3770 #: build/C/man3/mblen.3:43
3772 "If I<s> is not a NULL pointer, the B<mblen>() function inspects at most "
3773 "I<n> bytes of the multibyte string starting at I<s> and extracts the next "
3774 "complete multibyte character. It uses a static anonymous shift state known "
3775 "only to the B<mblen>() function. If the multibyte character is not the "
3776 "null wide character, it returns the number of bytes that were consumed from "
3777 "I<s>. If the multibyte character is the null wide character, it returns 0."
3779 "I<s> が NULL ポインターでなければ、 B<mblen>() 関数は I<s> から始まる最大 "
3780 "I<n> バイトのマルチバイト文字列を検査して、 次の完全なマルチバイト文字を取り"
3781 "出す。これには B<mblen>() 関数のみが使用する静的で名前のないシフト状態が使用"
3782 "される。 マルチバイト文字がナルワイド文字でなければ I<s> から消費される バイ"
3783 "ト数を返す。マルチバイト文字がナルワイド文字ならば 0 を返す。"
3786 #: build/C/man3/mblen.3:57
3788 "If the I<n> bytes starting at I<s> do not contain a complete multibyte "
3789 "character, B<mblen>() returns -1. This can happen even if I<n> is greater "
3790 "than or equal to I<MB_CUR_MAX>, if the multibyte string contains redundant "
3793 "I<s> から始まる I<n> バイトが完全なマルチバイト文字を含んで いなければ、 "
3794 "B<mblen>() は -1 を返す。マルチバイト文字列 に冗長なシフトシーケンスが含まれ"
3795 "ていると、 I<n> が I<MB_CUR_MAX> 以上の場合にも このようなことが起こりえる。"
3798 #: build/C/man3/mblen.3:64
3800 "If the multibyte string starting at I<s> contains an invalid multibyte "
3801 "sequence before the next complete character, B<mblen>() also returns -1."
3803 "I<s> から始まるマルチバイト文字列が次の完全な文字の前に 不正なマルチバイト列"
3804 "を含んでいる場合にも、 B<mblen>() は -1 を返す。"
3806 #. The Dinkumware doc and the Single UNIX specification say this, but
3807 #. glibc doesn't implement this.
3809 #: build/C/man3/mblen.3:75
3811 "If I<s> is a NULL pointer, the B<mblen>() function resets the shift state, "
3812 "known to only this function, to the initial state, and returns nonzero if "
3813 "the encoding has nontrivial shift state, or zero if the encoding is "
3816 "I<s> が NULL ポインターならば、 B<mblen>() 関数はこの関数のみが 使用するシフ"
3817 "ト状態を初期化状態に戻し、シフト状態を使用した文字符号の場合に はゼロ以外を、"
3818 "文字符号がシフト状態を持たない場合にはゼロを返す。"
3821 #: build/C/man3/mblen.3:87
3823 "The B<mblen>() function returns the number of bytes parsed from the "
3824 "multibyte sequence starting at I<s>, if a non-null wide character was "
3825 "recognized. It returns 0, if a null wide character was recognized. It "
3826 "returns -1, if an invalid multibyte sequence was encountered or if it "
3827 "couldn't parse a complete multibyte character."
3829 "B<mblen>() 関数は I<s> から始まるマルチバイト列を検査して ナルワイド文字以外"
3830 "を確認した場合にはそのバイト数を返す。 ナルワイド文字を確認した場合にはゼロを"
3831 "返す。不正なマルチバイト列に 遭遇した場合や完全なマルチバイト文字を解析できな"
3835 #: build/C/man3/mblen.3:92
3836 msgid "The B<mblen>() function is not thread-safe."
3837 msgstr "B<mblen>() 関数はスレッドセーフではない。"
3840 #: build/C/man3/mblen.3:94 build/C/man3/mbstowcs.3:95
3841 #: build/C/man3/mbtowc.3:116 build/C/man3/wcstombs.3:90
3842 #: build/C/man3/wctomb.3:86
3847 #: build/C/man3/mblen.3:101
3849 "The behavior of B<mblen>() depends on the B<LC_CTYPE> category of the "
3852 "B<mblen>() の動作は現在のロケールの B<LC_CTYPE> カテゴリに依存している。"
3855 #: build/C/man3/mblen.3:106
3857 "The function B<mbrlen>(3) provides a better interface to the same "
3859 msgstr "B<mbrlen>(3) 関数は同じ機能のより良いインタフェースを提供する。"
3862 #: build/C/man3/mblen.3:108
3863 msgid "B<mbrlen>(3)"
3864 msgstr "B<mbrlen>(3)"
3867 #: build/C/man3/mbstowcs.3:16
3873 #: build/C/man3/mbstowcs.3:16 build/C/man3/mbtowc.3:16
3879 #: build/C/man3/mbstowcs.3:19
3880 msgid "mbstowcs - convert a multibyte string to a wide-character string"
3881 msgstr "mbstowcs - マルチバイト文字列をワイド文字列に変換する"
3884 #: build/C/man3/mbstowcs.3:24
3886 msgid "B<size_t mbstowcs(wchar_t *>I<dest>B<, const char *>I<src>B<, size_t >I<n>B<);>\n"
3887 msgstr "B<size_t mbstowcs(wchar_t *>I<dest>B<, const char *>I<src>B<, size_t >I<n>B<);>\n"
3890 #: build/C/man3/mbstowcs.3:43
3892 "If I<dest> is not a NULL pointer, the B<mbstowcs>() function converts the "
3893 "multibyte string I<src> to a wide-character string starting at I<dest>. At "
3894 "most I<n> wide characters are written to I<dest>. The conversion starts in "
3895 "the initial state. The conversion can stop for three reasons:"
3897 "I<dest> が NULL ポインターでなければ B<mbstowcs>() 関数は マルチバイト文字"
3898 "列 I<*src> を I<dest> から始まるワイド文字列に 変換する。I<dest> には最大で "
3899 "I<n> 文字のワイド文字が 書き込まれる。変換は初期状態で開始され、 以下の三つの"
3903 #: build/C/man3/mbstowcs.3:43
3909 #: build/C/man3/mbstowcs.3:48
3911 "An invalid multibyte sequence has been encountered. In this case I<"
3912 "(size_t)\\ -1> is returned."
3913 msgstr "不正なマルチバイト列に遭遇した。この場合には I<(size_t)\\ -1> を返す。"
3916 #: build/C/man3/mbstowcs.3:48
3922 #: build/C/man3/mbstowcs.3:57
3924 "I<n> non-L\\(aq\\e0\\(aq wide characters have been stored at I<dest>. In "
3925 "this case the number of wide characters written to I<dest> is returned, but "
3926 "the shift state at this point is lost."
3928 "I<n> 文字の L\\(aq\\e0\\(aq 以外のワイド文字を I<dest> に格納した場合。 この"
3929 "場合は I<*src> が次に変換されるマルチバイト列を指すようにして、 I<dest> に書"
3930 "き込まれたワイド文字の数を返す。しかしこの指している 場所のシフト状態は失われ"
3934 #: build/C/man3/mbstowcs.3:57
3940 #: build/C/man3/mbstowcs.3:63
3942 "The multibyte string has been completely converted, including the "
3943 "terminating null wide character (\\(aq\\e0\\(aq). In this case the number "
3944 "of wide characters written to I<dest>, excluding the terminating null wide "
3945 "character, is returned."
3947 "マルチバイト文字列が終端の NULL ワイド文字 (\\(aq\\e0\\(aq) まで含めて完全に "
3948 "変換された場合。この場合は終端の NULL ワイド文字を除いて I<dest> に書き込まれ"
3952 #: build/C/man3/mbstowcs.3:69
3954 "The programmer must ensure that there is room for at least I<n> wide "
3955 "characters at I<dest>."
3957 "プログラマーは I<dest> に最低でも I<n> ワイド文字を書き込むこ とができる空間"
3958 "があることを保証しなければならない。"
3961 #: build/C/man3/mbstowcs.3:77
3963 "If I<dest> is NULL, I<n> is ignored, and the conversion proceeds as above, "
3964 "except that the converted wide characters are not written out to memory, and "
3965 "that no length limit exists."
3967 "I<dest> が NULL の場合、I<n> は無視され、上記と同様の変換が 行われるが、変換"
3968 "されたワイド文字はメモリに書き込まれず、変換先の上限 が存在しない。"
3971 #: build/C/man3/mbstowcs.3:83
3973 "In order to avoid the case 2 above, the programmer should make sure I<n> is "
3974 "greater or equal to I<mbstowcs(NULL,src,0)+1>."
3976 "上記の 2. の場合を避けるためにプログラマーは I<n> が I<mbstowcs(NULL,"
3977 "src,0)+1> 以上であることを保証すべきである。"
3980 #: build/C/man3/mbstowcs.3:93
3982 "The B<mbstowcs>() function returns the number of wide characters that make "
3983 "up the converted part of the wide-character string, not including the "
3984 "terminating null wide character. If an invalid multibyte sequence was "
3985 "encountered, I<(size_t)\\ -1> is returned."
3987 "B<mbstowcs>() 関数はワイド文字列に変換完了したワイド文字の数を返す。 終端の"
3988 "ナルワイド文字は含まない。不正なマルチバイト列に遭遇した場合には I<"
3989 "(size_t)\\ -1> を返す。"
3992 #: build/C/man3/mbstowcs.3:102
3994 "The behavior of B<mbstowcs>() depends on the B<LC_CTYPE> category of the "
3997 "B<mbstowcs>() の動作は現在のロケールの B<LC_CTYPE> カテゴリに依存している。"
4000 #: build/C/man3/mbstowcs.3:107
4002 "The function B<mbsrtowcs>(3) provides a better interface to the same "
4004 msgstr "B<mbsrtowcs>(3) 関数は同じ機能のより良いインターフェースを提供する。"
4007 #: build/C/man3/mbstowcs.3:110
4008 msgid "B<mbsrtowcs>(3), B<wcstombs>(3)"
4009 msgstr "B<mbsrtowcs>(3), B<wcstombs>(3)"
4012 #: build/C/man3/mbtowc.3:16
4018 #: build/C/man3/mbtowc.3:19
4019 msgid "mbtowc - convert a multibyte sequence to a wide character"
4020 msgstr "mbtowc - マルチバイト列をワイド文字に変換する"
4023 #: build/C/man3/mbtowc.3:24
4025 msgid "B<int mbtowc(wchar_t *>I<pwc>B<, const char *>I<s>B<, size_t >I<n>B<);>\n"
4026 msgstr "B<int mbtowc(wchar_t *>I<pwc>B<, const char *>I<s>B<, size_t >I<n>B<);>\n"
4029 #: build/C/man3/mbtowc.3:50
4031 "The main case for this function is when I<s> is not NULL and I<pwc> is not "
4032 "NULL. In this case, the B<mbtowc>() function inspects at most I<n> bytes "
4033 "of the multibyte string starting at I<s>, extracts the next complete "
4034 "multibyte character, converts it to a wide character and stores it at "
4035 "I<*pwc>. It updates an internal shift state known only to the B<mbtowc>() "
4036 "function. If I<s> does not point to a null byte (\\(aq\\e0\\(aq), it "
4037 "returns the number of bytes that were consumed from I<s>, otherwise it "
4040 "この関数が用いられる場合、通常 I<s> が NULL でなく I<pwc> も NULL でない。こ"
4041 "の場合は B<mbtowc>() 関数は I<s> から始まる 最大 I<n> バイトのマルチバイト文"
4042 "字列を検査して、次の完全なマルチバイト 文字を取り出し、それをワイド文字に変換"
4043 "して I<*pwc> に格納する。 同時に mbtowc 関数のみが使用する内部状態を更新す"
4044 "る。I<s> が NULL バイト (\\(aq\\e0\\(aq) 以外を指している場合は、I<s> から消"
4045 "費するバイト数を返す。 I<s> が NULL バイトを指している場合には 0 を返す。"
4048 #: build/C/man3/mbtowc.3:64
4050 "If the I<n> bytes starting at I<s> do not contain a complete multibyte "
4051 "character, or if they contain an invalid multibyte sequence, B<mbtowc>() "
4052 "returns -1. This can happen even if I<n> E<gt>= I<MB_CUR_MAX>, if the "
4053 "multibyte string contains redundant shift sequences."
4055 "I<s> から始まる I<n> バイトが完全なマルチバイト文字を含んで いない場合や不正"
4056 "なマルチバイト列を含んでいる場合には B<mbtowc>() は -1 を返す。マルチバイト"
4057 "文字列に冗長なシフトシーケンスが 含まれていると I<n> E<gt>= I<MB_CUR_MAX> の"
4058 "場合もこのようなことが 起こりえる。"
4061 #: build/C/man3/mbtowc.3:75
4063 "A different case is when I<s> is not NULL but I<pwc> is NULL. In this case "
4064 "the B<mbtowc>() function behaves as above, except that it does not store "
4065 "the converted wide character in memory."
4067 "I<s> が NULL でなく I<pwc> が NULL の場合は B<mbtowc>() 関数は 上記と同様に"
4068 "動作するが、変換したワイド文字はメモリには書き込まれない。"
4070 #. The Dinkumware doc and the Single UNIX specification say this, but
4071 #. glibc doesn't implement this.
4073 #: build/C/man3/mbtowc.3:94
4075 "A third case is when I<s> is NULL. In this case, I<pwc> and I<n> are "
4076 "ignored. The B<mbtowc>() function resets the shift state, only known to "
4077 "this function, to the initial state, and returns nonzero if the encoding has "
4078 "nontrivial shift state, or zero if the encoding is stateless."
4080 "三番目の場合として I<s> が NULL の場合は I<pwc> と I<n> は 無視される。 "
4081 "B<mbtowc>() 関数のみが使用するシフト状態は初期状態に 戻される。そして文字符"
4082 "号がシフト状態に依存するならばゼロ以外を、文字符号が 状態によらないならばゼロ"
4086 #: build/C/man3/mbtowc.3:106
4088 "If I<s> is not NULL, the B<mbtowc>() function returns the number of "
4089 "consumed bytes starting at I<s>, or 0 if I<s> points to a null byte, or -1 "
4092 "I<s> が NULL でなければ B<mbtowc>() 関数は I<s> から消費した バイト数を、"
4093 "I<s> がナル文字を指している場合はゼロを、 変換に失敗した場合は -1 を返す。"
4096 #: build/C/man3/mbtowc.3:114
4098 "If I<s> is NULL, the B<mbtowc>() function returns nonzero if the encoding "
4099 "has nontrivial shift state, or zero if the encoding is stateless."
4101 "I<s> が NULL ならば B<mbtowc>() 関数は文字符号がシフト状態に依存 していれば"
4102 "ゼロ以外を、状態によらなければゼロを返す。"
4105 #: build/C/man3/mbtowc.3:123
4107 "The behavior of B<mbtowc>() depends on the B<LC_CTYPE> category of the "
4110 "B<mbtowc>() の動作は現在のロケールの B<LC_CTYPE> カテゴリに依存している。"
4113 #: build/C/man3/mbtowc.3:129
4115 "This function is not multithread safe. The function B<mbrtowc>(3) provides "
4116 "a better interface to the same functionality."
4118 "この関数はマルチスレッドでは安全ではない。 B<mbrtowc>(3) 関数は 同じ機能のよ"
4122 #: build/C/man3/mbtowc.3:133
4123 msgid "B<MB_CUR_MAX>(3), B<mbrtowc>(3), B<mbstowcs>(3)"
4124 msgstr "B<MB_CUR_MAX>(3), B<mbrtowc>(3), B<mbstowcs>(3)"
4127 #: build/C/man3/mkdtemp.3:26
4133 #: build/C/man3/mkdtemp.3:29
4134 msgid "mkdtemp - create a unique temporary directory"
4135 msgstr "mkdtemp - 他と重ならない一時的なディレクトリを作成する"
4138 #: build/C/man3/mkdtemp.3:34
4140 msgid "B<char *mkdtemp(char *>I<template>B<);>\n"
4141 msgstr "B<char *mkdtemp(char *>I<template>B<);>\n"
4144 #: build/C/man3/mkdtemp.3:42
4145 msgid "B<mkdtemp>():"
4146 msgstr "B<mkdtemp>():"
4149 #: build/C/man3/mkdtemp.3:47
4151 msgstr "_BSD_SOURCE"
4154 #: build/C/man3/mkdtemp.3:49
4155 msgid "|| /* Since glibc 2.10: */"
4156 msgstr "|| /* Since glibc 2.10: */"
4159 #: build/C/man3/mkdtemp.3:51
4160 msgid "(_POSIX_C_SOURCE\\ E<gt>=\\ 200809L || _XOPEN_SOURCE\\ E<gt>=\\ 700)"
4161 msgstr "(_POSIX_C_SOURCE\\ E<gt>=\\ 200809L || _XOPEN_SOURCE\\ E<gt>=\\ 700)"
4164 #: build/C/man3/mkdtemp.3:68
4166 "The B<mkdtemp>() function generates a uniquely named temporary directory "
4167 "from I<template>. The last six characters of I<template> must be XXXXXX and "
4168 "these are replaced with a string that makes the directory name unique. The "
4169 "directory is then created with permissions 0700. Since it will be modified, "
4170 "I<template> must not be a string constant, but should be declared as a "
4173 "B<mkdtemp>() 関数は、他と重ならない名前の一時的なディレクトリを I<template> "
4174 "から作成する。 I<template> の後から 6 文字は XXXXXX でなければならない。 この"
4175 "部分はディレクトリ名を他と重ならなくするための 文字列で置き換えられる。 ディ"
4176 "レクトリは許可属性を 0700 として作成される。 I<template> は変更されるので、文"
4177 "字列定数にしてはならず、文字配列にすべきである。"
4180 #: build/C/man3/mkdtemp.3:75
4182 "The B<mkdtemp>() function returns a pointer to the modified template string "
4183 "on success, and NULL on failure, in which case I<errno> is set appropriately."
4185 "成功した場合、 B<mkdtemp>() 関数は 変更された template 文字列へのポインタを"
4186 "返す。 失敗した場合は、NULL を返して、 I<errno> を適切に設定する。"
4189 #: build/C/man3/mkdtemp.3:76 build/C/man3/mkstemp.3:147
4190 #: build/C/man3/mktemp.3:89 build/C/man3/random.3:141
4191 #: build/C/man3/random.3:148 build/C/man3/random_r.3:106
4192 #: build/C/man3/random_r.3:110 build/C/man3/random_r.3:119
4193 #: build/C/man3/setenv.3:119 build/C/man3/strtol.3:145
4194 #: build/C/man3/strtoul.3:149
4200 #: build/C/man3/mkdtemp.3:80
4202 "The last six characters of I<template> were not XXXXXX. Now I<template> is "
4205 "I<template> の最後の 6 文字が XXXXXX でない。この場合、I<template> は変更され"
4209 #: build/C/man3/mkdtemp.3:84
4210 msgid "Also see B<mkdir>(2) for other possible values for I<errno>."
4211 msgstr "I<errno> に設定される他の値については、 B<mkdir>(2) を参照すること。"
4214 #: build/C/man3/mkdtemp.3:86
4215 msgid "Available since glibc 2.1.91."
4216 msgstr "OpenBSD 2.2 で導入された。"
4218 #. As at 2006, this function is being considered for a revision of POSIX.1
4219 #. Also in NetBSD 1.4.
4221 #: build/C/man3/mkdtemp.3:91
4222 msgid "POSIX.1-2008. This function is present on the BSDs."
4223 msgstr "POSIX.1-2008. この関数は BSD に存在する。"
4226 #: build/C/man3/mkdtemp.3:98
4228 "B<mkdir>(2), B<mkstemp>(3), B<mktemp>(3), B<tempnam>(3), B<tmpfile>(3), "
4231 "B<mkdir>(2), B<mkstemp>(3), B<mktemp>(3), B<tempnam>(3), B<tmpfile>(3), "
4235 #: build/C/man3/mkstemp.3:35
4241 #: build/C/man3/mkstemp.3:35
4247 #: build/C/man3/mkstemp.3:38
4248 msgid "mkstemp, mkostemp, mkstemps, mkostemps - create a unique temporary file"
4250 "mkstemp, mkostemp, mkstemps, mkostemps - 他と重ならない名前を持つ一時ファイル"
4254 #: build/C/man3/mkstemp.3:43
4256 msgid "B<int mkstemp(char *>I<template>B<);>\n"
4257 msgstr "B<int mkstemp(char *>I<template>B<);>\n"
4260 #: build/C/man3/mkstemp.3:45
4262 msgid "B<int mkostemp(char *>I<template>B<, int >I<flags>B<);>\n"
4263 msgstr "B<int mkostemp(char *>I<template>B<, int >I<flags>B<);>\n"
4266 #: build/C/man3/mkstemp.3:47
4268 msgid "B<int mkstemps(char *>I<template>B<, int >I<suffixlen>B<);>\n"
4269 msgstr "B<int mkstemps(char *>I<template>B<, int >I<suffixlen>B<);>\n"
4272 #: build/C/man3/mkstemp.3:49
4274 msgid "B<int mkostemps(char *>I<template>B<, int >I<suffixlen>B<, int >I<flags>B<);>\n"
4275 msgstr "B<int mkostemps(char *>I<template>B<, int >I<suffixlen>B<, int >I<flags>B<);>\n"
4278 #: build/C/man3/mkstemp.3:57
4279 msgid "B<mkstemp>():"
4280 msgstr "B<mkstemp>():"
4283 #: build/C/man3/mkstemp.3:62 build/C/man3/mktemp.3:63
4285 "_BSD_SOURCE || _SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || _XOPEN_SOURCE"
4286 "\\ &&\\ _XOPEN_SOURCE_EXTENDED"
4288 "_BSD_SOURCE || _SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || _XOPEN_SOURCE"
4289 "\\ &&\\ _XOPEN_SOURCE_EXTENDED"
4292 #: build/C/man3/mkstemp.3:64
4293 msgid "|| /* Since glibc 2.12: */ _POSIX_C_SOURCE\\ E<gt>=\\ 200112L"
4294 msgstr "|| /* Since glibc 2.12: */ _POSIX_C_SOURCE\\ E<gt>=\\ 200112L"
4297 #: build/C/man3/mkstemp.3:70
4298 msgid "B<mkostemp>(): _GNU_SOURCE"
4299 msgstr "B<mkostemp>(): _GNU_SOURCE"
4302 #: build/C/man3/mkstemp.3:73
4303 msgid "B<mkstemps>(): _BSD_SOURCE || _SVID_SOURCE"
4304 msgstr "B<mkstemps>(): _BSD_SOURCE || _SVID_SOURCE"
4307 #: build/C/man3/mkstemp.3:76
4308 msgid "B<mkostemps>(): _GNU_SOURCE"
4309 msgstr "B<mkostemps>(): _GNU_SOURCE"
4312 #: build/C/man3/mkstemp.3:83
4314 "The B<mkstemp>() function generates a unique temporary filename from "
4315 "I<template>, creates and opens the file, and returns an open file descriptor "
4318 "関数 B<mkstemp>() は引数 I<template> から他と重ならない一時ファイル名を生成"
4319 "し、 そのファイルの作成とオープンを行い、 そのファイルに対するオープン済みの"
4323 #: build/C/man3/mkstemp.3:91
4325 "The last six characters of I<template> must be \"XXXXXX\" and these are "
4326 "replaced with a string that makes the filename unique. Since it will be "
4327 "modified, I<template> must not be a string constant, but should be declared "
4328 "as a character array."
4330 "引数 I<template> で指示する文字列の後ろの 6 文字は XXXXXX である必要がある。 "
4331 "この部分がファイル名を他と重ならないようにする文字で置き換えられる。 "
4332 "I<template> は書き換えられるため、文字列定数ではなく文字配列として 宣言するよ"
4336 #: build/C/man3/mkstemp.3:99
4338 "The file is created with permissions 0600, that is, read plus write for "
4339 "owner only. The returned file descriptor provides both read and write "
4340 "access to the file. The file is opened with the B<open>(2) B<O_EXCL> flag, "
4341 "guaranteeing that the caller is the process that creates the file."
4343 "ファイルは許可モード 0600 で作成され、所有者のみが読み書き可能である。返され"
4344 "るファイルディスクリプタで、このファイルへの読み書き両方のアクセスが 可能であ"
4345 "る。 呼び出し者がそのファイルを作成するプロセスであることを保証するために、 "
4346 "ファイルは B<open>(2) の B<O_EXCL> フラグ付きでオープンされる。"
4349 #: build/C/man3/mkstemp.3:111
4351 "The B<mkostemp>() function is like B<mkstemp>(), with the difference that "
4352 "flags as for B<open>(2) may be specified in I<flags> (e.g., B<O_APPEND>, "
4355 "B<mkostemp>() 関数は B<mkstemp>() と同様だが、B<open>(2) に渡される\n"
4356 "フラグ O_APPENDB<,> B<O_SYNC> など) を I<flags> で指定できる点が異なる"
4359 #: build/C/man3/mkstemp.3:127
4361 "The B<mkstemps>() function is like B<mkstemp>(), except that the string in "
4362 "I<template> contains a suffix of I<suffixlen> characters. Thus, I<template> "
4363 "is of the form I<prefixXXXXXXsuffix>, and the string XXXXXX is modified as "
4366 "B<mkstemps>() 関数は B<mkstemp>() と同様だが、 I<template> 内の文字列に長さ\n"
4367 "が I<suffixlen> 文字の接尾辞 (suffix) が含まれる点が異なる。\n"
4368 "したがって、 I<template> は I<prefixXXXXXXsuffix> の形式となる。\n"
4369 "文字列 XXXXXX の部分は B<mkstemp>() により更新される。"
4372 #: build/C/man3/mkstemp.3:136
4374 "The B<mkostemps>() function is to B<mkstemps>() as B<mkostemp>() is to "
4377 "B<mkostemps>() と B<mkstemps>() の関係は、\n"
4378 "B<mkostemp>() と B<mkstemp>() の関係と同じである。"
4381 #: build/C/man3/mkstemp.3:142
4383 "On success, these functions return the file descriptor of the temporary "
4384 "file. On error, -1 is returned, and I<errno> is set appropriately."
4386 "成功すると、これらの関数は一時ファイルのファイルディスクリプタを返す。 エラー"
4387 "の場合は、-1 を返し、 I<errno> を適切に設定する。"
4390 #: build/C/man3/mkstemp.3:143
4396 #: build/C/man3/mkstemp.3:147
4398 "Could not create a unique temporary filename. Now the contents of "
4399 "I<template> are undefined."
4401 "すでに同じ名前を持つファイルが存在した。 I<template> の内容は不定である。"
4404 #: build/C/man3/mkstemp.3:155
4406 "For B<mkstemp>() and B<mkostemp>(): The last six characters of I<template> "
4407 "were not XXXXXX; now I<template> is unchanged."
4409 "B<mkstemp>() と B<mkostemp>() の場合:\n"
4410 "I<template> の最後の 6 文字が XXXXXX でなかった。\n"
4411 "この場合、I<template> は変更されない。"
4414 #: build/C/man3/mkstemp.3:166
4416 "For B<mkstemps>() and B<mkostemps>(): I<template> is less than I<(6 + "
4417 "suffixlen)> characters long, or the last 6 characters before the suffix in "
4418 "I<template> were not XXXXXX."
4420 "B<mkstemps>() と B<mkostemps>() の場合:\n"
4421 "I<template> の長さが I<(6 + suffixlen)> 文字より短い、または\n"
4422 "I<template> の接尾辞の直前の 6 文字が XXXXXX ではなかった。"
4425 #: build/C/man3/mkstemp.3:169
4427 "These functions may also fail with any of the errors described for B<open>"
4430 "これらの関数は B<open>(2) に書かれているエラーのいずれかで失敗することもあ"
4434 #: build/C/man3/mkstemp.3:176
4436 "B<mkostemp>() is available since glibc 2.7. B<mkstemps>() and B<mkostemps>"
4437 "() are available since glibc 2.11."
4439 "B<mkostemp>() は glibc 2.7 以降で利用できる。\n"
4440 "B<mkstemps>() と B<mkostemps>() は glibc 2.11 以降で利用できる。"
4443 #: build/C/man3/mkstemp.3:179
4444 msgid "B<mkstemp>(): 4.3BSD, POSIX.1-2001."
4445 msgstr "B<mkstemp>(): 4.3BSD, POSIX.1-2001."
4447 #. mkstemps() appears to be at least on the BSDs, Mac OS X, Solaris,
4450 #: build/C/man3/mkstemp.3:184
4451 msgid "B<mkstemps>(): unstandardized, but appears on several other systems."
4453 "B<mkstemps>(): 標準化されていないが、他のいくつかのシステムにも存在する。"
4456 #: build/C/man3/mkstemp.3:189
4457 msgid "B<mkostemp>() and B<mkostemps>(): are glibc extensions."
4458 msgstr "B<mkostemp>() と B<mkostemps>(): glibc による拡張。"
4461 #: build/C/man3/mkstemp.3:196
4463 "In glibc versions 2.06 and earlier, the file is created with permissions "
4464 "0666, that is, read and write for all users. This old behavior may be a "
4465 "security risk, especially since other UNIX flavors use 0600, and somebody "
4466 "might overlook this detail when porting programs. POSIX.1-2008 adds a "
4467 "requirement that the file be created with mode 0600."
4469 "glibc バージョン 2.06 以前では、ファイルは許可モード 0666 で作成され、全ての"
4470 "ユーザが読み書き可能であった。この古い動作は、 セキュリティ上のリスクになり得"
4471 "る。特に、他の UNIX では許可モードとして 0600 を使うため、プログラムを移植す"
4472 "る際、この細かな違いを見落とす可能性があるからだ。 POSIX.1-2008 では、ファイ"
4473 "ルを許可モード 0600 で作成することが必須要件として追加された。"
4476 #: build/C/man3/mkstemp.3:207
4478 "More generally, the POSIX specification of B<mkstemp>() does not say "
4479 "anything about file modes, so the application should make sure its file mode "
4480 "creation mask (see B<umask>(2)) is set appropriately before calling "
4481 "B<mkstemp>() (and B<mkostemp>())."
4483 "より一般的には、 B<mkstemp>() の POSIX 規定ではファイルモードについて何も述"
4484 "べていない。 従って、アプリケーションは B<mkstemp>() (や B<mkostemp>()) を"
4485 "呼び出す前にファイルモード生成マスク (B<umask>(2) 参照) が適切に設定されてい"
4489 #: build/C/man3/mkstemp.3:214
4491 "The prototype for B<mktemp>() is in I<E<lt>unistd.hE<gt>> for libc4, libc5, "
4492 "glibc1; glibc2 follows POSIX.1 and has the prototype in I<E<lt>stdlib."
4495 "B<mktemp>() のプロトタイプ宣言は、libc4, libc5, glibc1 では I<E<lt>unistd."
4496 "hE<gt>> に含まれる; glibc2 では POSIX.1 に準拠し I<E<lt>stdlib.hE<gt>> に含ま"
4500 #: build/C/man3/mkstemp.3:220
4501 msgid "B<mkdtemp>(3), B<mktemp>(3), B<tempnam>(3), B<tmpfile>(3), B<tmpnam>(3)"
4503 "B<mkdtemp>(3), B<mktemp>(3), B<tempnam>(3), B<tmpfile>(3), B<tmpnam>(3)"
4506 #: build/C/man3/mktemp.3:34
4512 #: build/C/man3/mktemp.3:34 build/C/man3/putenv.3:36 build/C/man3/random.3:33
4513 #: build/C/man3/random_r.3:26
4519 #: build/C/man3/mktemp.3:37
4520 msgid "mktemp - make a unique temporary filename"
4521 msgstr "mktemp - 他と重ならないテンポラリファイル名を作成する"
4524 #: build/C/man3/mktemp.3:42
4526 msgid "B<char *mktemp(char *>I<template>B<);>\n"
4527 msgstr "B<char *mktemp(char *>I<template>B<);>\n"
4530 #: build/C/man3/mktemp.3:50
4531 msgid "B<mktemp>():"
4532 msgstr "B<mktemp>():"
4535 #: build/C/man3/mktemp.3:59
4538 "_BSD_SOURCE || _SVID_SOURCE ||\n"
4539 " (_XOPEN_SOURCE\\ E<gt>=\\ 500 ||\n"
4540 " _XOPEN_SOURCE\\ &&\\ _XOPEN_SOURCE_EXTENDED) &&\n"
4541 " !(_POSIX_C_SOURCE\\ E<gt>=\\ 200112L || _XOPEN_SOURCE\\ E<gt>=\\ 600)\n"
4543 "_BSD_SOURCE || _SVID_SOURCE ||\n"
4544 " (_XOPEN_SOURCE\\ E<gt>=\\ 500 ||\n"
4545 " _XOPEN_SOURCE\\ &&\\ _XOPEN_SOURCE_EXTENDED) &&\n"
4546 " !(_POSIX_C_SOURCE\\ E<gt>=\\ 200112L || _XOPEN_SOURCE\\ E<gt>=\\ 600)\n"
4549 #: build/C/man3/mktemp.3:77
4551 "The B<mktemp>() function generates a unique temporary filename from "
4552 "I<template>. The last six characters of I<template> must be XXXXXX and "
4553 "these are replaced with a string that makes the filename unique. Since it "
4554 "will be modified, I<template> must not be a string constant, but should be "
4555 "declared as a character array."
4557 "関数 B<mktemp>() は引数 I<template> から他と重ならない テンポラリファイル名"
4558 "を作成する。引数 I<template> で指示する文字配列 の後6文字は XXXXXX である必要"
4559 "がある。この部分がファイル名を他と 重ならないにするような文字で置き換えられ"
4560 "る。 I<template> は書き換えられるため、文字列定数ではなく文字配列として宣言す"
4564 #: build/C/man3/mktemp.3:88
4566 "The B<mktemp>() function always returns I<template>. If a unique name was "
4567 "created, the last six bytes of I<template> will have been modified in such a "
4568 "way that the resulting name is unique (i.e., does not exist already) If a "
4569 "unique name could not be created, I<template> is made an empty string, and "
4570 "I<errno> is set to indicate the error."
4572 "関数 B<mktemp>() は常に I<template> を戻す。 一意な名前が作成された場合、 "
4573 "I<template> の最後の 6 バイトに 他と重ならない名前 (それまでに出ていない名"
4574 "前) になるような値が格納される。 一意な名前が作成できなかった場合には、 "
4575 "I<template> には空文字列がセットされ、 I<errno> にエラーを示す値がセットされ"
4579 #: build/C/man3/mktemp.3:92
4580 msgid "The last six characters of I<template> were not XXXXXX."
4581 msgstr "引数 I<template> で指示された文字列の後6文字が XXXXXX でない。"
4584 #: build/C/man3/mktemp.3:96
4586 "4.3BSD, POSIX.1-2001. POSIX.1-2008 removes the specification of B<mktemp>()."
4588 "4.3BSD, POSIX.1-2001. POSIX.1-2008 では B<mktemp>() の仕様が削除されてい"
4592 #: build/C/man3/mktemp.3:102
4594 "The prototype is in I<E<lt>unistd.hE<gt>> for libc4, libc5, glibc1; glibc2 "
4595 "follows the Single UNIX Specification and has the prototype in I<E<lt>stdlib."
4598 "libc4, libc5, glibc1 でのプロトタイプ宣言は I<E<lt>unistd.hE<gt>> に含まれ"
4599 "る; glibc2 では Single UNIX Specification に従って I<E<lt>stdlib.hE<gt>> に含"
4603 #: build/C/man3/mktemp.3:102 build/C/man3/random.3:180
4604 #: build/C/man3/rpmatch.3:104 build/C/man3/setenv.3:143
4610 #: build/C/man3/mktemp.3:115
4612 "Never use B<mktemp>(). Some implementations follow 4.3BSD and replace "
4613 "XXXXXX by the current process ID and a single letter, so that at most 26 "
4614 "different names can be returned. Since on the one hand the names are easy "
4615 "to guess, and on the other hand there is a race between testing whether the "
4616 "name exists and opening the file, every use of B<mktemp>() is a security "
4617 "risk. The race is avoided by B<mkstemp>(3)."
4619 "B<mktemp>() を決して使わないこと。4.3BSD 系の実装や XXXXXX を プロセス ID と"
4620 "1文字により置き換える方式ではせいぜい26の名前を返す ことができるにすぎない。 "
4621 "この名前は簡単に推測できることや、その名前がすでに存在しているかどうか テスト"
4622 "して、そのファイルをオープンする間に競合がある事から、 B<mktemp>() を使うの"
4623 "は毎回セキュリティリスクをおかすことになる。 この競合は B<mkstemp>(3) を使う"
4627 #: build/C/man3/mktemp.3:120
4628 msgid "B<mkstemp>(3), B<tempnam>(3), B<tmpfile>(3), B<tmpnam>(3)"
4629 msgstr "B<mkstemp>(3), B<tempnam>(3), B<tmpfile>(3), B<tmpnam>(3)"
4632 #: build/C/man3/on_exit.3:31
4638 #: build/C/man3/on_exit.3:34
4640 "on_exit - register a function to be called at normal process termination"
4641 msgstr "on_exit - プロセスが正常に終了した際に呼ばれる関数を登録する"
4644 #: build/C/man3/on_exit.3:39
4646 msgid "B<int on_exit(void (*>I<function>B<)(int , void *), void *>I<arg>B<);>\n"
4647 msgstr "B<int on_exit(void (*>I<function>B<)(int , void *), void *>I<arg>B<);>\n"
4650 #: build/C/man3/on_exit.3:48
4651 msgid "B<on_exit>(): _BSD_SOURCE || _SVID_SOURCE"
4652 msgstr "B<on_exit>(): _BSD_SOURCE || _SVID_SOURCE"
4655 #: build/C/man3/on_exit.3:66
4657 "The B<on_exit>() function registers the given I<function> to be called at "
4658 "normal process termination, whether via B<exit>(3) or via return from the "
4659 "program's I<main>(). The I<function> is passed the status argument given to "
4660 "the last call to B<exit>(3) and the I<arg> argument from B<on_exit>()."
4662 "B<on_exit>() 関数は、指定された関数 I<function> を、プロセスが 正常に終了し"
4663 "た際に呼ばれる関数として登録する。正常な終了とは、 B<exit>(3) またはプログラ"
4664 "ムの I<main>() 関数の中の return 命令による終了である。 関数 I<function> に"
4665 "は、直近の B<exit>(3) の呼び出しで渡された status 引数と B<on_exit>() の "
4669 #: build/C/man3/on_exit.3:81
4671 "The B<on_exit>() function returns the value 0 if successful; otherwise it "
4672 "returns a nonzero value."
4673 msgstr "B<on_exit>() 関数は、成功したら 0 を、そうでなければ 0 以外を返す。"
4676 #: build/C/man3/on_exit.3:88
4678 "This function comes from SunOS 4, but is also present in libc4, libc5 and "
4679 "glibc. It no longer occurs in Solaris (SunOS 5). Avoid this function, and "
4680 "use the standard B<atexit>(3) instead."
4682 "この関数は SunOS 4 由来であるが、libc4, libc5, glibc にも存在する。 Solaris "
4683 "(SunOS 5) にはもはや存在しない。 この関数の使用は避け、代わりに標準の "
4684 "B<atexit>(3) を使うこと。"
4687 #: build/C/man3/on_exit.3:92
4688 msgid "B<_exit>(2), B<atexit>(3), B<exit>(3)"
4689 msgstr "B<_exit>(2), B<atexit>(3), B<exit>(3)"
4692 #: build/C/man3/putenv.3:36
4698 #: build/C/man3/putenv.3:39
4699 msgid "putenv - change or add an environment variable"
4700 msgstr "putenv - 環境変数の変更または追加"
4702 #. Not: const char *
4704 #: build/C/man3/putenv.3:45
4706 msgid "B<int putenv(char *>I<string>B<);>\n"
4707 msgstr "B<int putenv(char *>I<string>B<);>\n"
4710 #: build/C/man3/putenv.3:54
4711 msgid "B<putenv>(): _SVID_SOURCE || _XOPEN_SOURCE"
4712 msgstr "B<putenv>(): _SVID_SOURCE || _XOPEN_SOURCE"
4715 #: build/C/man3/putenv.3:67
4717 "The B<putenv>() function adds or changes the value of environment "
4718 "variables. The argument I<string> is of the form I<name>=I<value>. If "
4719 "I<name> does not already exist in the environment, then I<string> is added "
4720 "to the environment. If I<name> does exist, then the value of I<name> in the "
4721 "environment is changed to I<value>. The string pointed to by I<string> "
4722 "becomes part of the environment, so altering the string changes the "
4725 "B<putenv>() 関数は、環境変数の追加または値の変更を行う。 引数 I<string> は "
4726 "I<name>=I<value> という形式を取る。 I<name> が環境に存在しない場合は "
4727 "I<string> が環境に追加される。 I<name> が環境に存在する場合は I<name> の値は "
4728 "I<value> に変更される。 I<string> が指している文字列は環境の一部となるので、 "
4729 "文字列を変更すると環境も変更される。"
4732 #: build/C/man3/putenv.3:75
4734 "The B<putenv>() function returns zero on success, or nonzero if an error "
4735 "occurs. In the event of an error, I<errno> is set to indicate the cause."
4737 "B<putenv>() 関数は、成功すると 0 を返し、エラーの場合は 0 以外の値を返す。エ"
4738 "ラーが発生した場合、 I<errno> に原因を示す値が設定される。"
4741 #: build/C/man3/putenv.3:76 build/C/man3/setenv.3:124
4747 #: build/C/man3/putenv.3:79
4748 msgid "Insufficient space to allocate new environment."
4749 msgstr "新しい環境を割り当てるのに十分な空きがない。"
4752 #: build/C/man3/putenv.3:81
4753 msgid "SVr4, POSIX.1-2001, 4.3BSD."
4754 msgstr "SVr4, POSIX.1-2001, 4.3BSD."
4757 #: build/C/man3/putenv.3:86
4759 "The B<putenv>() function is not required to be reentrant, and the one in "
4760 "libc4, libc5 and glibc 2.0 is not, but the glibc 2.1 version is."
4762 "B<putenv>() はリエントラントであることを求められていない。 libc4, libc5, "
4763 "glibc 2.0 ではリエントラントではない。 glibc 2.1 ではリエントラントである。"
4766 #: build/C/man3/putenv.3:99
4768 "Description for libc4, libc5, glibc: If the argument I<string> is of the "
4769 "form I<name>, and does not contain an \\(aq=\\(aq character, then the "
4770 "variable I<name> is removed from the environment. If B<putenv>() has to "
4771 "allocate a new array I<environ>, and the previous array was also allocated "
4772 "by B<putenv>(), then it will be freed. In no case will the old storage "
4773 "associated to the environment variable itself be freed."
4775 "libc4, libc5, glibc に関する説明: もし引数 I<string> が I<name> 単独で、 "
4776 "\\(aq=\\(aq 文字を含んでいない場合、環境変数 I<name> は環境から除去される。 "
4777 "もし B<putenv>() が新しい I<environ> 配列を確保しなければならない時、 以前"
4778 "の I<environ> 配列も B<putenv>() によって確保されたものならば、 それは解放さ"
4779 "れる。 環境変数そのものに割り当てられた古い記憶領域が解放されることはない。"
4782 #: build/C/man3/putenv.3:115
4784 "The libc4 and libc5 and glibc 2.1.2 versions conform to SUSv2: the pointer "
4785 "I<string> given to B<putenv>() is used. In particular, this string becomes "
4786 "part of the environment; changing it later will change the environment. "
4787 "(Thus, it is an error is to call B<putenv>() with an automatic variable as "
4788 "the argument, then return from the calling function while I<string> is still "
4789 "part of the environment.) However, glibc 2.0-2.1.1 differs: a copy of the "
4790 "string is used. On the one hand this causes a memory leak, and on the other "
4791 "hand it violates SUSv2. This has been fixed in glibc 2.1.2."
4793 "libc4 と libc5 と glibc 2.1.2 では SUSv2 に準拠している。 B<putenv>() で与え"
4794 "られたポインタ I<string> が使われる。 この文字列は環境の一部となり、後で変更"
4795 "すると環境も変わる。 (従って、 B<putenv>() を自動変数を引数として呼び出し、 "
4796 "I<string>が環境の一部のままで呼び出した関数から return するとエラーになる) "
4797 "しかし、glibc 2.0-2.1.1 では異なり、文字列のコピーが使われる。 これはメモリ"
4798 "リークを引き起こすだけでなく、 SUSv2 に違反している。 これは glibc2.1.2 で修"
4802 #: build/C/man3/putenv.3:117
4803 msgid "The 4.4BSD version, like glibc 2.0, uses a copy."
4804 msgstr "4.4BSD バージョンでは、glibc 2.0 と同様にコピーを使う。"
4807 #: build/C/man3/putenv.3:119
4808 msgid "SUSv2 removes the I<const> from the prototype, and so does glibc 2.1.3."
4810 "SUSv2 ではプロトタイプから I<const> が取り除かれており、 glibc 2.1.3 もそのよ"
4814 #: build/C/man3/putenv.3:125
4816 "B<clearenv>(3), B<getenv>(3), B<setenv>(3), B<unsetenv>(3), B<environ>(7)"
4818 "B<clearenv>(3), B<getenv>(3), B<setenv>(3), B<unsetenv>(3), B<environ>(7)"
4821 #: build/C/man3/qecvt.3:28
4827 #: build/C/man3/qecvt.3:28
4833 #: build/C/man3/qecvt.3:31
4834 msgid "qecvt, qfcvt, qgcvt - convert a floating-point number to a string"
4835 msgstr "qecvt, qfcvt, qgcvt - 浮動小数点数の文字列への変換"
4838 #: build/C/man3/qecvt.3:36
4840 "B<char *qecvt(long double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,"
4841 "> B<int *>I<sign>B<);>"
4843 "B<char *qecvt(long double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,"
4844 "> B<int *>I<sign>B<);>"
4847 #: build/C/man3/qecvt.3:39
4849 "B<char *qfcvt(long double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,"
4850 "> B<int *>I<sign>B<);>"
4852 "B<char *qfcvt(long double >I<number>B<, int >I<ndigits>B<, int *>I<decpt>B<,"
4853 "> B<int *>I<sign>B<);>"
4856 #: build/C/man3/qecvt.3:41
4858 "B<char *qgcvt(long double >I<number>B<, int >I<ndigit>B<, char *>I<buf>B<);>"
4860 "B<char *qgcvt(long double >I<number>B<, int >I<ndigit>B<, char *>I<buf>B<);>"
4863 #: build/C/man3/qecvt.3:52
4864 msgid "B<qecvt>(), B<qfcvt>(), B<qgcvt>(): _SVID_SOURCE"
4865 msgstr "B<qecvt>(), B<qfcvt>(), B<qgcvt>(): _SVID_SOURCE"
4868 #: build/C/man3/qecvt.3:72
4870 "The functions B<qecvt>(), B<qfcvt>() and B<qgcvt>() are identical to "
4871 "B<ecvt>(3), B<fcvt>(3) and B<gcvt>(3) respectively, except that they use a "
4872 "I<long double> argument I<number>. See B<ecvt>(3) and B<gcvt>(3)."
4874 "関数 B<qecvt>(), B<qfcvt>(), B<qgcvt>() は、それぞれ B<ecvt>(3), B<fcvt>"
4875 "(3), B<gcvt>(3) と同じである。 引き数 I<number> が I<long double> 型である点"
4879 #: build/C/man3/qecvt.3:79
4880 msgid "The B<qecvt>() and B<qfcvt>() functions are not thread-safe."
4881 msgstr "関数 B<qecvt>() と B<qfcvt>() はスレッドセーフではない。"
4884 #: build/C/man3/qecvt.3:83
4885 msgid "The B<qgcvt>() function is thread-safe."
4886 msgstr "関数 B<qgcvt>() はスレッドセーフである。"
4889 #: build/C/man3/qecvt.3:89
4891 "SVr4. Not seen in most common UNIX implementations, but occurs in SunOS. "
4892 "Not supported by libc4 and libc5. Supported by glibc."
4894 "SVr4. 多くの一般的な UNIX には実装されていないが、SunOS には実装されてい"
4895 "る。 libc4 と libc5 ではサポートされていないが、 glibc ではサポートされてい"
4899 #: build/C/man3/qecvt.3:99
4900 msgid "B<ecvt>(3), B<ecvt_r>(3), B<gcvt>(3), B<sprintf>(3)"
4901 msgstr "B<ecvt>(3), B<ecvt_r>(3), B<gcvt>(3), B<sprintf>(3)"
4904 #: build/C/man3/rand.3:41
4910 #: build/C/man3/rand.3:41
4916 #: build/C/man3/rand.3:44
4917 msgid "rand, rand_r, srand - pseudo-random number generator"
4918 msgstr "rand, srand - 乱数を生成する関数"
4921 #: build/C/man3/rand.3:49
4923 msgid "B<int rand(void);>\n"
4924 msgstr "B<int rand(void);>\n"
4927 #: build/C/man3/rand.3:51
4929 msgid "B<int rand_r(unsigned int *>I<seedp>B<);>\n"
4930 msgstr "B<int rand_r(unsigned int *>I<seedp>B<);>\n"
4933 #: build/C/man3/rand.3:53
4935 msgid "B<void srand(unsigned int >I<seed>B<);>\n"
4936 msgstr "B<void srand(unsigned int >I<seed>B<);>\n"
4939 #: build/C/man3/rand.3:62
4941 "B<rand_r>(): _POSIX_C_SOURCE\\ E<gt>=\\ 1 || _XOPEN_SOURCE || _POSIX_SOURCE"
4943 "B<rand_r>(): _POSIX_C_SOURCE\\ E<gt>=\\ 1 || _XOPEN_SOURCE || _POSIX_SOURCE"
4946 #: build/C/man3/rand.3:68
4948 "The B<rand>() function returns a pseudo-random integer in the range 0 to "
4949 "B<RAND_MAX> inclusive (i.e., the mathematical range [0,\\ B<RAND_MAX>])."
4951 "B<rand>() 関数は 0 以上 B<RAND_MAX> 以下\n"
4952 "(数学的に書くと [0,\\ B<RAND_MAX>]) の範囲の疑似乱数整数を返す。"
4955 #: build/C/man3/rand.3:77
4957 "The B<srand>() function sets its argument as the seed for a new sequence of "
4958 "pseudo-random integers to be returned by B<rand>(). These sequences are "
4959 "repeatable by calling B<srand>() with the same seed value."
4961 "B<srand>() 関数は、 B<rand>() 関数で作られる疑似乱数整数系列の新しい種とし"
4962 "て、 その引き数の値を使用する。 これらの関数を使用して作られた疑似乱数系列"
4963 "は、 同じ値を引き数として B<srand>() を呼ぶことで、 再現することが可能であ"
4967 #: build/C/man3/rand.3:81
4969 "If no seed value is provided, the B<rand>() function is automatically "
4970 "seeded with a value of 1."
4972 "種の値が与えられない場合には、 B<rand>() 関数は 自動的に 1 を種とする。"
4975 #: build/C/man3/rand.3:92
4977 "The function B<rand>() is not reentrant or thread-safe, since it uses "
4978 "hidden state that is modified on each call. This might just be the seed "
4979 "value to be used by the next call, or it might be something more elaborate. "
4980 "In order to get reproducible behavior in a threaded application, this state "
4981 "must be made explicit; this can be done using the reentrant function "
4984 "B<rand>() 関数は再入可能 (reentrant) ではない、つまりスレッド・セーフではな"
4986 "この関数には隠し状態があり、呼び出される度にこの隠し状態が変更されるからであ"
4988 "ちょうどこの隠し状態が次の呼び出し時の乱数の種として使われるようなものであ"
4990 "実際にはもう少し複雑かもしれないが。\n"
4991 "スレッドを使用するアプリケーションで再現可能な動作をさせたい場合には、\n"
4992 "この状態を明示的に指定できなければならない。これを行うには、\n"
4993 "再入可能な B<rand_r>() 関数を使用する。"
4996 #: build/C/man3/rand.3:108
4998 "Like B<rand>(), B<rand_r>() returns a pseudo-random integer in the range [0,"
4999 "\\ B<RAND_MAX>]. The I<seedp> argument is a pointer to an I<unsigned int> "
5000 "that is used to store state between calls. If B<rand_r>() is called with "
5001 "the same initial value for the integer pointed to by I<seedp>, and that "
5002 "value is not modified between calls, then the same pseudo-random sequence "
5005 "B<rand>() と同様、 B<rand_r>() は [0,\\ B<RAND_MAX>] の範囲の疑似乱数整数を返"
5007 "I<seedp> 引き数は、B<rand_r>() の呼び出し間で状態を保持するために使用される\n"
5008 "I<unsigned int> へのポインタである。\n"
5009 "I<seedp> が指す整数に同じ初期値を B<rand_r>() を呼び出し、\n"
5010 "呼び出し間でその値が変更されなければ、同じ疑似乱数系列が得られる。"
5013 #: build/C/man3/rand.3:118
5015 "The value pointed to by the I<seedp> argument of B<rand_r>() provides only "
5016 "a very small amount of state, so this function will be a weak pseudo-random "
5017 "generator. Try B<drand48_r>(3) instead."
5019 "B<rand_r>() の I<seedp> 引き数が指す値により提供される状態は非常に小さな空"
5021 "なので、この関数は弱い疑似乱数生成器になってしまう。\n"
5022 "代わりに B<drand48_r>(3) を使ってみるとよい。"
5025 #: build/C/man3/rand.3:129
5027 "The B<rand>() and B<rand_r>() functions return a value between 0 and "
5028 "B<RAND_MAX> (inclusive). The B<srand>() function returns no value."
5030 "関数 B<rand>() と B<rand_r>() は 0 以上 B<RAND_MAX> 以下の数を返す。\n"
5031 "関数 B<srand>() は値を返さない。"
5034 #: build/C/man3/rand.3:141
5036 "The functions B<rand>() and B<srand>() conform to SVr4, 4.3BSD, C89, C99, "
5037 "POSIX.1-2001. The function B<rand_r>() is from POSIX.1-2001. POSIX.1-2008 "
5038 "marks B<rand_r>() as obsolete."
5040 "関数 B<rand>() と B<srand>() は SVr4, 4.3BSD, C89, C99, POSIX.1-2001 に準拠"
5041 "している。 関数 B<rand_r>() は POSIX.1-2001 に由来する。 POSIX.1-2008 は、 "
5042 "B<rand_r>() を廃止予定としている。"
5045 #: build/C/man3/rand.3:160
5047 "The versions of B<rand>() and B<srand>() in the Linux C Library use the "
5048 "same random number generator as B<random>(3) and B<srandom>(3), so the "
5049 "lower-order bits should be as random as the higher-order bits. However, on "
5050 "older B<rand>() implementations, and on current implementations on "
5051 "different systems, the lower-order bits are much less random than the higher-"
5052 "order bits. Do not use this function in applications intended to be "
5053 "portable when good randomness is needed. (Use B<random>(3) instead.)"
5055 "B<rand>() と B<srand>() の Linux C Library 版は、 B<random>(3) と "
5056 "B<srandom>(3) の両関数と同じ乱数生成 アルゴリズムを使用している。そのため、"
5057 "下位のビットは上位のビットと 同じくらいにランダムである。 しかし、旧版の "
5058 "B<rand>() の実装や、他のシステムの現在の実装では、下位のビットが上位のビット"
5059 "ほど ランダムになっていない。移植性を高める場合でも、精度の高い乱数が必要な "
5060 "アプリケーションではこの関数は使用してはいけない (代わりに B<random>(3) を使"
5064 #: build/C/man3/rand.3:166
5066 "POSIX.1-2001 gives the following example of an implementation of B<rand>() "
5067 "and B<srand>(), possibly useful when one needs the same sequence on two "
5068 "different machines."
5070 "POSIX 1003.1-2003 では、 B<rand>() と B<srand>() の実装例として以下を挙げて"
5071 "いる。これは、異なる2つのマシンで同じ乱数系列が 必要な場合には便利であろう。"
5074 #: build/C/man3/rand.3:170
5076 msgid "static unsigned long next = 1;\n"
5077 msgstr "static unsigned long next = 1;\n"
5080 #: build/C/man3/rand.3:176
5083 "/* RAND_MAX assumed to be 32767 */\n"
5084 "int myrand(void) {\n"
5085 " next = next * 1103515245 + 12345;\n"
5086 " return((unsigned)(next/65536) % 32768);\n"
5089 "/* RAND_MAX を 32767 と仮定 */\n"
5090 "int myrand(void) {\n"
5091 " next = next * 1103515245 + 12345;\n"
5092 " return((unsigned)(next/65536) % 32768);\n"
5096 #: build/C/man3/rand.3:180
5099 "void mysrand(unsigned seed) {\n"
5103 "void mysrand(unsigned seed) {\n"
5108 #: build/C/man3/rand.3:187
5110 "The following program can be used to display the pseudo-random sequence "
5111 "produced by B<rand>() when given a particular seed."
5113 "以下のプログラムを使うと、特定の乱数の種が与えられた場合に\n"
5114 "B<rand>() が生成する疑似乱数系列を表示することができる。"
5117 #: build/C/man3/rand.3:192
5120 "#include E<lt>stdlib.hE<gt>\n"
5121 "#include E<lt>stdio.hE<gt>\n"
5123 "#include E<lt>stdlib.hE<gt>\n"
5124 "#include E<lt>stdio.hE<gt>\n"
5127 #: build/C/man3/rand.3:198
5131 "main(int argc, char *argv[])\n"
5133 " int j, r, nloops;\n"
5134 " unsigned int seed;\n"
5137 "main(int argc, char *argv[])\n"
5139 " int j, r, nloops;\n"
5140 " unsigned int seed;\n"
5143 #: build/C/man3/rand.3:203
5146 " if (argc != 3) {\n"
5147 " fprintf(stderr, \"Usage: %s E<lt>seedE<gt> E<lt>nloopsE<gt>\\en\", argv[0]);\n"
5148 " exit(EXIT_FAILURE);\n"
5151 " if (argc != 3) {\n"
5152 " fprintf(stderr, \"Usage: %s E<lt>seedE<gt> E<lt>nloopsE<gt>\\en\", argv[0]);\n"
5153 " exit(EXIT_FAILURE);\n"
5157 #: build/C/man3/rand.3:206
5160 " seed = atoi(argv[1]);\n"
5161 " nloops = atoi(argv[2]);\n"
5163 " seed = atoi(argv[1]);\n"
5164 " nloops = atoi(argv[2]);\n"
5167 #: build/C/man3/rand.3:212
5171 " for (j = 0; j E<lt> nloops; j++) {\n"
5173 " printf(\"%d\\en\", r);\n"
5177 " for (j = 0; j E<lt> nloops; j++) {\n"
5179 " printf(\"%d\\en\", r);\n"
5183 #: build/C/man3/rand.3:220
5184 msgid "B<drand48>(3), B<random>(3)"
5185 msgstr "B<drand48>(3), B<random>(3)"
5188 #: build/C/man3/random.3:33
5194 #: build/C/man3/random.3:36
5195 msgid "random, srandom, initstate, setstate - random number generator"
5196 msgstr "random, srandom, initstate, setstate - 乱数を生成する関数"
5199 #: build/C/man3/random.3:41
5201 msgid "B<long int random(void);>\n"
5202 msgstr "B<long int random(void);>\n"
5205 #: build/C/man3/random.3:43
5207 msgid "B<void srandom(unsigned int >I<seed>B<);>\n"
5208 msgstr "B<void srandom(unsigned int >I<seed>B<);>\n"
5211 #: build/C/man3/random.3:45
5213 msgid "B<char *initstate(unsigned int >I<seed>B<, char *>I<state>B<, size_t >I<n>B<);>\n"
5214 msgstr "B<char *initstate(unsigned int >I<seed>B<, char *>I<state>B<, size_t >I<n>B<);>\n"
5217 #: build/C/man3/random.3:47
5219 msgid "B<char *setstate(char *>I<state>B<);>\n"
5220 msgstr "B<char *setstate(char *>I<state>B<);>\n"
5223 #: build/C/man3/random.3:59
5224 msgid "B<random>(), B<srandom>(), B<initstate>(), B<setstate>():"
5225 msgstr "B<random>(), B<srandom>(), B<initstate>(), B<setstate>():"
5228 #: build/C/man3/random.3:62
5230 "_SVID_SOURCE || _BSD_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || _XOPEN_SOURCE"
5231 "\\ &&\\ _XOPEN_SOURCE_EXTENDED"
5233 "_SVID_SOURCE || _BSD_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || _XOPEN_SOURCE"
5234 "\\ &&\\ _XOPEN_SOURCE_EXTENDED"
5237 #: build/C/man3/random.3:73
5239 "The B<random>() function uses a nonlinear additive feedback random number "
5240 "generator employing a default table of size 31 long integers to return "
5241 "successive pseudo-random numbers in the range from 0 to B<RAND_MAX>. The "
5242 "period of this random number generator is very large, approximately I<16\\ *"
5243 "\\ ((2^31)\\ -\\ 1)>."
5245 "B<random>() 関数は、非線形加法フィードバックを用いた乱数生成関数である。 こ"
5246 "の関数は、0 から B<RAND_MAX> までの疑似乱数を返す。 そのために 31 個のロング"
5247 "整数からなるデフォルトの表を使用する。 この乱数を生成する関数の周期はとても長"
5248 "く、およそ I<16\\ *\\ ((2^31)\\ -\\ 1)> である。"
5251 #: build/C/man3/random.3:87
5253 "The B<srandom>() function sets its argument as the seed for a new sequence "
5254 "of pseudo-random integers to be returned by B<random>(). These sequences "
5255 "are repeatable by calling B<srandom>() with the same seed value. If no "
5256 "seed value is provided, the B<random>() function is automatically seeded "
5257 "with a value of 1."
5259 "B<srandom>() 関数は、 B<random>() で返される疑似乱数整数系列の種を設定す"
5260 "る。 そのためには新しい種を引数にして B<srandom>() を呼べばよい。 B<random>"
5261 "() で生成される系列は、 引数に同じ種の値を用いて B<srandom>() を呼ぶことで"
5262 "再現可能である。 種の値が与えられない場合には B<random>() 関数は、自動的に "
5266 #: build/C/man3/random.3:102
5268 "The B<initstate>() function allows a state array I<state> to be initialized "
5269 "for use by B<random>(). The size of the state array I<n> is used by "
5270 "B<initstate>() to decide how sophisticated a random number generator it "
5271 "should use\\(emthe larger the state array, the better the random numbers "
5272 "will be. I<seed> is the seed for the initialization, which specifies a "
5273 "starting point for the random number sequence, and provides for restarting "
5274 "at the same point."
5276 "B<initstate>() 関数は、 B<random>() で使用される状態配列 I<state> を初期化"
5277 "する。 B<initstate>() では、状態配列の大きさ I<n> は 使用する関数の乱数生成"
5278 "の性能の程度を決定するために使用される \\(em 状態配列が大きい程、乱数の性能は"
5279 "よくなる。 I<seed> は初期化のための種である。 これは乱数系列の開始位置を決定"
5280 "するものであり、 この値を指定することで同一の開始位置から乱数の生成を 再開す"
5284 #: build/C/man3/random.3:118
5286 "The B<setstate>() function changes the state array used by the B<random>() "
5287 "function. The state array I<state> is used for random number generation "
5288 "until the next call to B<initstate>() or B<setstate>(). I<state> must "
5289 "first have been initialized using B<initstate>() or be the result of a "
5290 "previous call of B<setstate>()."
5292 "B<setstate>() 関数は、 B<random>() で使用される状態配列を変更する。 状態配"
5293 "列 I<state> は、 B<initstate>() または B<setstate>() が 次に呼び出されるま"
5294 "で、乱数の生成に使用される。 I<state> は B<initstate>() を用いて最初に初期化"
5295 "されているか、 以前に呼び出した B<setstate>() の結果でなければならない。"
5298 #: build/C/man3/random.3:126
5300 "The B<random>() function returns a value between 0 and B<RAND_MAX>. The "
5301 "B<srandom>() function returns no value."
5303 "関数 B<random>() と B<rand_r>() は 0 以上 B<RAND_MAX> 以下の数を返す。\n"
5304 "関数 B<srandom>() は値を返さない。"
5307 #: build/C/man3/random.3:133
5309 "The B<initstate>() function returns a pointer to the previous state array. "
5310 "On error, I<errno> is set to indicate the cause."
5312 "関数 B<initstate>() は、変更前の状態配列へのポインタを返す。エラーの場合、 "
5313 "I<errno> に原因を示す値が設定される。"
5316 #: build/C/man3/random.3:140
5318 "On success, B<setstate>() returns a pointer to the previous state array. "
5319 "On error, it returns NULL, with I<errno> set to indicate the cause of the "
5322 "関数 B<setstate>() は、成功すると 0 を返す。 エラーの場合、-1 を返し、 "
5323 "I<errno> にエラーの原因を示す値が設定される。"
5326 #: build/C/man3/random.3:148
5327 msgid "The I<state> argument given to B<setstate>() was NULL."
5328 msgstr "B<setstate>() の引き数 I<state> が NULL であった。"
5331 #: build/C/man3/random.3:152
5332 msgid "A state array of less than 8 bytes was specified to B<initstate>()."
5333 msgstr "B<initstate>() で8バイトよりも小さい状態配列を指定した。"
5336 #: build/C/man3/random.3:154 build/C/man3/setenv.3:129
5337 msgid "4.3BSD, POSIX.1-2001."
5338 msgstr "4.3BSD, POSIX.1-2001."
5341 #: build/C/man3/random.3:160
5343 "Current \"optimal\" values for the size of the state array I<n> are 8, 32, "
5344 "64, 128, and 256 bytes; other amounts will be rounded down to the nearest "
5345 "known amount. Using less than 8 bytes will cause an error."
5347 "状態配列 I<n> の大きさの現在の「最適」値は 8、32、64、128、256 バイトであ"
5348 "る。 その他の量を指定した場合には、指定した量を越えない上述の値に 最も近い値"
5349 "になる。 8 バイト未満の量を指定した場合にはエラーの原因となる。"
5352 #: build/C/man3/random.3:167
5354 "This function should not be used in cases where multiple threads use "
5355 "B<random>() and the behavior should be reproducible. Use B<random_r>(3) "
5358 "複数のスレッドが B<random>() を使うような状況では、この関数を使用すべきでは"
5359 "ない。 その場合には B<random_r>(3) を使うこと。"
5362 #: build/C/man3/random.3:174
5364 "Random-number generation is a complex topic. I<Numerical Recipes in C: The "
5365 "Art of Scientific Computing> (William H. Press, Brian P. Flannery, Saul A. "
5366 "Teukolsky, William T. Vetterling; New York: Cambridge University Press, "
5367 "2007, 3rd ed.) provides an excellent discussion of practical random-number "
5368 "generation issues in Chapter 7 (Random Numbers)."
5370 "乱数の生成は複雑な話題である。 I<Numerical Recipes in C: The Art of "
5371 "Scientific Computing> (William H. Press, Brian P. Flannery, Saul A. "
5372 "Teukolsky, William T. Vetterling; New York: Cambridge University Press, "
5373 "2007, 3rd ed.) では実用的な乱数生成を論点とした優れた議論が第 7 章 (乱数) で"
5377 #: build/C/man3/random.3:180
5379 "For a more theoretical discussion which also covers many practical issues in "
5380 "depth, see Chapter 3 (Random Numbers) in Donald E. Knuth's I<The Art of "
5381 "Computer Programming>, volume 2 (Seminumerical Algorithms), 2nd ed.; "
5382 "Reading, Massachusetts: Addison-Wesley Publishing Company, 1981."
5384 "より理論的な議論については Donald E. Knuth の I<The Art of Computer "
5385 "Programming>, volume 2 (Seminumerical Algorithms), 2nd ed.; Reading, "
5386 "Massachusetts: Addison-Wesley Publishing Company, 1981 の第 3 章 (乱数) を見"
5387 "よ。ここでは、 たくさんの実用的な話題についても深く網羅されている。"
5389 #. http://sourceware.org/bugzilla/show_bug.cgi?id=15380
5391 #: build/C/man3/random.3:188
5393 "According to POSIX, B<initstate>() should return NULL on error. In the "
5394 "glibc implementation, I<errno> is (as specified) set on error, but the "
5395 "function does not return NULL."
5397 "POSIX では、エラー時に B<initstate>() は NULL を返すべきとされている。 glibc "
5398 "の実装では、エラー時に I<errno> は仕様通りに設定されるが、関数の返り値は "
5402 #: build/C/man3/random.3:193
5403 msgid "B<drand48>(3), B<rand>(3), B<random_r>(3), B<srand>(3)"
5404 msgstr "B<drand48>(3), B<rand>(3), B<random_r>(3), B<srand>(3)"
5407 #: build/C/man3/random_r.3:26
5413 #: build/C/man3/random_r.3:30
5415 "random_r, srandom_r, initstate_r, setstate_r - reentrant random number "
5418 "random_r, srandom_r, initstate_r, setstate_r - リエントラントな 乱数生成器"
5421 #: build/C/man3/random_r.3:35
5423 msgid "B<int random_r(struct random_data *>I<buf>B<, int32_t *>I<result>B<);>\n"
5424 msgstr "B<int random_r(struct random_data *>I<buf>B<, int32_t *>I<result>B<);>\n"
5427 #: build/C/man3/random_r.3:37
5429 msgid "B<int srandom_r(unsigned int >I<seed>B<, struct random_data *>I<buf>B<);>\n"
5430 msgstr "B<int srandom_r(unsigned int >I<seed>B<, struct random_data *>I<buf>B<);>\n"
5433 #: build/C/man3/random_r.3:40
5436 "B<int initstate_r(unsigned int >I<seed>B<, char *>I<statebuf>B<,>\n"
5437 "B< size_t >I<statelen>B<, struct random_data *>I<buf>B<);>\n"
5439 "B<int initstate_r(unsigned int >I<seed>B<, char *>I<statebuf>B<,>\n"
5440 "B< size_t >I<statelen>B<, struct random_data *>I<buf>B<);>\n"
5443 #: build/C/man3/random_r.3:42
5445 msgid "B<int setstate_r(char *>I<statebuf>B<, struct random_data *>I<buf>B<);>\n"
5446 msgstr "B<int setstate_r(char *>I<statebuf>B<, struct random_data *>I<buf>B<);>\n"
5449 #: build/C/man3/random_r.3:54
5450 msgid "B<random_r>(), B<srandom_r>(), B<initstate_r>(), B<setstate_r>():"
5451 msgstr "B<random_r>(), B<srandom_r>(), B<initstate_r>(), B<setstate_r>():"
5454 #: build/C/man3/random_r.3:56
5455 msgid "_SVID_SOURCE || _BSD_SOURCE"
5456 msgstr "_SVID_SOURCE || _BSD_SOURCE"
5459 #: build/C/man3/random_r.3:64
5461 "These functions are the reentrant equivalents of the functions described in "
5462 "B<random>(3). They are suitable for use in multithreaded programs where "
5463 "each thread needs to obtain an independent, reproducible sequence of random "
5466 "これらの関数は、 B<random>(3) で説明されている関数のリエントラント版で、等価"
5467 "な機能を持つ。 これらは、独立した再現可能な乱数列を各スレッドが得る必要がある"
5468 "ような マルチスレッド・プログラムでの使用に適している。"
5471 #: build/C/man3/random_r.3:75
5473 "The B<random_r>() function is like B<random>(3), except that instead of "
5474 "using state information maintained in a global variable, it uses the state "
5475 "information in the argument pointed to by I<buf>. The generated random "
5476 "number is returned in the argument I<result>."
5478 "B<random_r>() 関数は B<random>(3) と同様だが、 大域変数 (global variable) "
5479 "で管理される状態情報を使うのではなく、 I<buf> が指す引き数に格納された状態情"
5480 "報を使う。 生成された乱数は引き数 I<result> に格納されて返される。"
5483 #: build/C/man3/random_r.3:84
5485 "The B<srandom_r>() function is like B<srandom>(3), except that it "
5486 "initializes the seed for the random number generator whose state is "
5487 "maintained in the object pointed to by I<buf>, instead of the seed "
5488 "associated with the global state variable."
5490 "B<srandom_r>() 関数は B<srandom>(3) と同様だが、 大域変数で管理される状態に"
5491 "対応する乱数生成器の種ではなく、 I<buf> が指すオブジェクトで管理される状態に"
5492 "対応する乱数生成器の種を 初期化する。"
5495 #: build/C/man3/random_r.3:92
5497 "The B<initstate_r>() function is like B<initstate>(3) except that it "
5498 "initializes the state in the object pointed to by I<buf>, rather than "
5499 "initializing the global state variable."
5501 "B<initstate_r>() 関数は B<initstate>(3) と同様だが、大域変数で管理される状"
5502 "態を初期化するのではなく、 I<buf> が指すオブジェクト内の状態を初期化する。"
5505 #: build/C/man3/random_r.3:100
5507 "The B<setstate_r>() function is like B<setstate>(3) except that it "
5508 "modifies the state in the object pointer to by I<buf>, rather than modifying "
5509 "the global state variable."
5511 "B<setstate_r>() 関数は B<setstate>(3) と同様だが、大域変数で管理される状態"
5512 "を変更するのではなく、 I<buf> が指すオブジェクト内の状態を変更する。"
5515 #: build/C/man3/random_r.3:105
5517 "All of these functions return 0 on success. On error, -1 is returned, with "
5518 "I<errno> set to indicate the cause of the error."
5520 "これらの関数はすべて、成功すると 0 を返す。 エラーの場合、-1 を返し、 "
5521 "I<errno> にエラーの原因を示す値がセットされる。"
5524 #: build/C/man3/random_r.3:110
5525 msgid "A state array of less than 8 bytes was specified to B<initstate_r>()."
5526 msgstr "8 バイトより小さい状態配列が B<initstate_r>() に指定された。"
5529 #: build/C/man3/random_r.3:119
5530 msgid "The I<statebuf> or I<buf> argument to B<setstate_r>() was NULL."
5531 msgstr "B<setstate_r>() の引き数 I<statebuf> か I<buf> が NULL であった。"
5534 #: build/C/man3/random_r.3:128
5535 msgid "The I<buf> or I<result> argument to B<random_r>() was NULL."
5536 msgstr "B<random_r>() の引き数 I<buf> か I<result> が NULL であった。"
5538 #. These functions appear to be on Tru64, but don't seem to be on
5539 #. Solaris, HP-UX, or FreeBSD.
5541 #: build/C/man3/random_r.3:132
5542 msgid "These functions are nonstandard glibc extensions."
5543 msgstr "これらの関数は非標準で glibc による拡張である。"
5546 #: build/C/man3/rpmatch.3:29
5552 #: build/C/man3/rpmatch.3:32
5554 "rpmatch - determine if the answer to a question is affirmative or negative"
5555 msgstr "rpmatch - 質問への応答が肯定か否定かを判定する"
5558 #: build/C/man3/rpmatch.3:37
5560 msgid "B<int rpmatch(const char *>I<response>B<);>\n"
5561 msgstr "B<int rpmatch(const char *>I<response>B<);>\n"
5564 #: build/C/man3/rpmatch.3:46
5565 msgid "B<rpmatch>(): _SVID_SOURCE"
5566 msgstr "B<rpmatch>(): _SVID_SOURCE"
5569 #: build/C/man3/rpmatch.3:50
5571 "B<rpmatch>() handles a user response to yes or no questions, with support "
5572 "for internationalization."
5574 "B<rpmatch>() は yes/no の質問に対するユーザからの応答を処理する。 国際化 "
5578 #: build/C/man3/rpmatch.3:57
5580 "I<response> should be a null-terminated string containing a user-supplied "
5581 "response, perhaps obtained with B<fgets>(3) or B<getline>(3)."
5583 "I<response> にはユーザからの応答を格納した NULL 終端文字列が入っている必要が"
5584 "ある。 たいていは、 B<fgets>(3) や B<getline>(3) で取り込んだものであろう。"
5587 #: build/C/man3/rpmatch.3:67
5589 "The user's language preference is taken into account per the environment "
5590 "variables B<LANG>, B<LC_MESSAGES>, and B<LC_ALL>, if the program has called "
5591 "B<setlocale>(3) to effect their changes."
5593 "プログラムが B<setlocale>(3) を呼び出して環境変数の変更を有効にした場合、 環"
5594 "境変数 B<LANG>, B<LC_MESSAGES>, B<LC_ALL> が ユーザの言語設定として考慮され"
5598 #: build/C/man3/rpmatch.3:73
5600 "Regardless of the locale, responses matching B<^[Yy]> are always accepted as "
5601 "affirmative, and those matching B<^[Nn]> are always accepted as negative."
5603 "ロケールに関わらず、B<^[Yy]> にマッチする応答は常に肯定だと解釈され、 B<^[Nn]"
5604 "> にマッチする応答は常に否定だと解釈される。"
5607 #: build/C/man3/rpmatch.3:82
5609 "After examining I<response>, B<rpmatch>() returns 0 for a recognized "
5610 "negative response (\"no\"), 1 for a recognized positive response (\"yes\"), "
5611 "and -1 when the value of I<response> is unrecognized."
5613 "I<response> を検査した後、 B<rpmatch>() は否定的な応答 (\"no\") と認識した場"
5614 "合は 0 を返し、 肯定的な応答 (\"yes\") と認識した場合は 1 を返す。 "
5615 "I<response> の値を解釈できなかった場合は -1 を返す。"
5618 #: build/C/man3/rpmatch.3:86
5620 "A return value of -1 may indicate either an invalid input, or some other "
5621 "error. It is incorrect to only test if the return value is nonzero."
5623 "返り値 -1 が返った場合、入力が不正であったか、他の何らかのエラーが あったこと"
5624 "を意味する。返り値が 0 以外かどうかを確認するだけでは 十分ではない。"
5627 #: build/C/man3/rpmatch.3:99
5629 "B<rpmatch>() can fail for any of the reasons that B<regcomp>(3) or "
5630 "B<regexec>(3) can fail; the cause of the error is not available from "
5631 "I<errno> or anywhere else, but indicates a failure of the regex engine (but "
5632 "this case is indistinguishable from that of an unrecognized value of "
5635 "B<rpmatch>() は、 B<regcomp>(3) や B<regexec>(3) が失敗する理由のどれかで"
5636 "失敗することがある。 エラーの原因を I<errno> や他の何かで知ることはできない"
5637 "が、 I<errno> は正規表現エンジンの失敗の原因を示している (但し、このケースと "
5638 "I<response> の値を認識できずに失敗した場合を区別することはできない)。"
5640 #. It is available on at least AIX 5.1 and FreeBSD 6.0.
5642 #: build/C/man3/rpmatch.3:104
5644 "B<rpmatch>() is not required by any standard, but is available on a few "
5647 "B<rpmatch>() はどの標準でも必須となっていないが、 Linux 以外にも利用できるシ"
5651 #: build/C/man3/rpmatch.3:119
5653 "The B<rpmatch>() implementation looks at only the first character of "
5654 "I<response>. As a consequence, \"nyes\" returns 0, and \"ynever; not in a "
5655 "million years\" returns 1. It would be preferable to accept input strings "
5656 "much more strictly, for example (using the extended regular expression "
5657 "notation described in B<regex>(7)): B<^([yY]|yes|YES)$> and B<^([nN]|no|"
5660 "B<rpmatch>() の実装は I<response> の最初の 1 文字だけを見ているようである。"
5661 "その結果、 \"nyes\" は 0 を返し、 \"ynever; not in a million years\" は 1 を"
5662 "返すことになる。 入力文字列をもっと厳密に解釈した方がよいだろう。 例えば、 "
5663 "(B<regex>(7) で説明されている拡張正規表現を使って) B<^([yY]|yes|YES)$> や "
5664 "B<^([nN]|no|NO)$> で解釈するなど。"
5667 #: build/C/man3/rpmatch.3:123
5669 "The following program displays the results when B<rpmatch>() is applied to "
5670 "the string given in the program's command-line argument."
5672 "以下のプログラムは、コマンドライン引き数で 指定された文字列を B<rpmatch>() "
5676 #: build/C/man3/rpmatch.3:130
5679 "#define _SVID_SOURCE\n"
5680 "#include E<lt>locale.hE<gt>\n"
5681 "#include E<lt>stdlib.hE<gt>\n"
5682 "#include E<lt>string.hE<gt>\n"
5683 "#include E<lt>stdio.hE<gt>\n"
5685 "#define _SVID_SOURCE\n"
5686 "#include E<lt>locale.hE<gt>\n"
5687 "#include E<lt>stdlib.hE<gt>\n"
5688 "#include E<lt>string.hE<gt>\n"
5689 "#include E<lt>stdio.hE<gt>\n"
5692 #: build/C/man3/rpmatch.3:138
5696 "main(int argc, char *argv[])\n"
5698 " if (argc != 2 || strcmp(argv[1], \"--help\") == 0) {\n"
5699 " fprintf(stderr, \"%s response\\en\", argv[0]);\n"
5700 " exit(EXIT_FAILURE);\n"
5704 "main(int argc, char *argv[])\n"
5706 " if (argc != 2 || strcmp(argv[1], \"--help\") == 0) {\n"
5707 " fprintf(stderr, \"%s response\\en\", argv[0]);\n"
5708 " exit(EXIT_FAILURE);\n"
5712 #: build/C/man3/rpmatch.3:143
5715 " setlocale(LC_ALL, \"\");\n"
5716 " printf(\"rpmatch() returns: %d\\en\", rpmatch(argv[1]));\n"
5717 " exit(EXIT_SUCCESS);\n"
5720 " setlocale(LC_ALL, \"\");\n"
5721 " printf(\"rpmatch() returns: %d\\en\", rpmatch(argv[1]));\n"
5722 " exit(EXIT_SUCCESS);\n"
5726 #: build/C/man3/rpmatch.3:150
5728 "B<fgets>(3), B<getline>(3), B<nl_langinfo>(3), B<regcomp>(3), B<setlocale>(3)"
5730 "B<fgets>(3), B<getline>(3), B<nl_langinfo>(3), B<regcomp>(3), B<setlocale>(3)"
5733 #: build/C/man3/setenv.3:37
5739 #: build/C/man3/setenv.3:37
5745 #: build/C/man3/setenv.3:40
5746 msgid "setenv - change or add an environment variable"
5747 msgstr "setenv - 環境変数を変更または追加する"
5750 #: build/C/man3/setenv.3:45
5752 msgid "B<int setenv(const char *>I<name>B<, const char *>I<value>B<, int >I<overwrite>B<);>\n"
5753 msgstr "B<int setenv(const char *>I<name>B<, const char *>I<value>B<, int >I<overwrite>B<);>\n"
5756 #: build/C/man3/setenv.3:47
5758 msgid "B<int unsetenv(const char *>I<name>B<);>\n"
5759 msgstr "B<int unsetenv(const char *>I<name>B<);>\n"
5762 #: build/C/man3/setenv.3:57
5763 msgid "B<setenv>(), B<unsetenv>():"
5764 msgstr "B<setenv>(), B<unsetenv>():"
5767 #: build/C/man3/setenv.3:59
5769 "_BSD_SOURCE || _POSIX_C_SOURCE\\ E<gt>=\\ 200112L || _XOPEN_SOURCE\\ E<gt>="
5772 "_BSD_SOURCE || _POSIX_C_SOURCE\\ E<gt>=\\ 200112L || _XOPEN_SOURCE\\ E<gt>="
5776 #: build/C/man3/setenv.3:93
5778 "The B<setenv>() function adds the variable I<name> to the environment with "
5779 "the value I<value>, if I<name> does not already exist. If I<name> does "
5780 "exist in the environment, then its value is changed to I<value> if "
5781 "I<overwrite> is nonzero; if I<overwrite> is zero, then the value of I<name> "
5782 "is not changed. This function makes copies of the strings pointed to by "
5783 "I<name> and I<value> (by contrast with B<putenv>(3))."
5785 "B<setenv>() 関数は、I<name> が存在しない場合 環境変数 I<name> に値 I<value> "
5786 "を設定し、環境に追加する。 I<name> が環境に存在する場合、I<overwrite> が 0 以"
5787 "外ならば その値を I<value> に変更し、I<overwrite> が 0 ならば I<name> の値を"
5788 "変更しない。 この関数は、 (B<putenv>(3) と違い) I<name> と I<value> により"
5792 #: build/C/man3/setenv.3:104
5794 "The B<unsetenv>() function deletes the variable I<name> from the "
5795 "environment. If I<name> does not exist in the environment, then the "
5796 "function succeeds, and the environment is unchanged."
5798 "B<unsetenv>() 関数は、変数 I<name> を環境から削除する。 I<name> が環境にない"
5799 "場合、この関数は成功し、環境は変更されない。"
5802 #: build/C/man3/setenv.3:111
5804 "The B<setenv>() function returns zero on success, or -1 on error, with "
5805 "I<errno> set to indicate the cause of the error."
5807 "B<setenv>() 関数は、成功すると 0 を返す。 エラーの場合、-1 を返し、 "
5808 "I<errno> にエラーの原因を示す値がセットされる。"
5811 #: build/C/man3/setenv.3:118
5813 "The B<unsetenv>() function returns zero on success, or -1 on error, with "
5814 "I<errno> set to indicate the cause of the error."
5816 "B<unsetenv>() 関数は、成功すると 0 を返す。 エラーの場合は -1 を返し、 "
5817 "I<errno> を設定してエラーの原因を示す。"
5820 #: build/C/man3/setenv.3:124
5822 "I<name> is NULL, points to a string of length 0, or contains an \\(aq=\\(aq "
5825 "I<name> が NULL であるか、長さが 0 の文字列を指しているか、 \\(aq=\\(aq 文字"
5829 #: build/C/man3/setenv.3:127
5830 msgid "Insufficient memory to add a new variable to the environment."
5831 msgstr "環境に新しい変数を追加するのに十分なメモリがない。"
5834 #: build/C/man3/setenv.3:135
5836 "POSIX.1-2001 does not require B<setenv>() or B<unsetenv>() to be reentrant."
5838 "POSIX.1-2001 は、 B<setenv>() や B<unsetenv>() がリエントラント (再入可能) "
5842 #: build/C/man3/setenv.3:143
5844 "Prior to glibc 2.2.2, B<unsetenv>() was prototyped as returning I<void>; "
5845 "more recent glibc versions follow the POSIX.1-2001-compliant prototype shown "
5848 "glibc 2.2.2 以前では、 B<unsetenv>() は 返り値が I<void> のプロトタイプで"
5849 "あった。 もっと最近の glibc 版は、「書式」セクションで示しているように "
5850 "POSIX.1-2001 互換のプロトタイプである。"
5853 #: build/C/man3/setenv.3:152
5855 "POSIX.1-2001 specifies that if I<name> contains an \\(aq=\\(aq character, "
5856 "then B<setenv>() should fail with the error B<EINVAL>; however, versions of "
5857 "glibc before 2.3.4 allowed an \\(aq=\\(aq sign in I<name>."
5859 "POSIX.1-2001 では 「I<name> に \\(aq=\\(aq 文字が含まれる場合、 B<setenv>() "
5860 "はエラー B<EINVAL> で失敗すべきである」と述べられている。 しかし 2.3.4 より前"
5861 "のバージョンの glibc では、 I<name> に \\(aq=\\(aq 文字が含まれるのを許してい"
5865 #: build/C/man3/setenv.3:157
5866 msgid "B<clearenv>(3), B<getenv>(3), B<putenv>(3), B<environ>(7)"
5867 msgstr "B<clearenv>(3), B<getenv>(3), B<putenv>(3), B<environ>(7)"
5870 #: build/C/man3/strtod.3:45
5876 #: build/C/man3/strtod.3:48
5877 msgid "strtod, strtof, strtold - convert ASCII string to floating-point number"
5878 msgstr "strtod, strtof, strtold - ASCII 文字列を浮動小数点実数に変換する"
5881 #: build/C/man3/strtod.3:52
5882 msgid "B<double strtod(const char *>I<nptr>B<, char **>I<endptr>B<);>"
5883 msgstr "B<double strtod(const char *>I<nptr>B<, char **>I<endptr>B<);>"
5886 #: build/C/man3/strtod.3:54
5887 msgid "B<float strtof(const char *>I<nptr>B<, char **>I<endptr>B<);>"
5888 msgstr "B<float strtof(const char *>I<nptr>B<, char **>I<endptr>B<);>"
5891 #: build/C/man3/strtod.3:56
5892 msgid "B<long double strtold(const char *>I<nptr>B<, char **>I<endptr>B<);>"
5893 msgstr "B<long double strtold(const char *>I<nptr>B<, char **>I<endptr>B<);>"
5896 #: build/C/man3/strtod.3:65
5897 msgid "B<strtof>(), B<strtold>():"
5898 msgstr "B<strtof>(), B<strtold>():"
5901 #: build/C/man3/strtod.3:87
5903 "The B<strtod>(), B<strtof>(), and B<strtold>() functions convert the "
5904 "initial portion of the string pointed to by I<nptr> to I<double>, I<float>, "
5905 "and I<long double> representation, respectively."
5907 "B<strtod>(), B<strtof>(), B<strtold>() 関数は、 I<nptr> が指し示す文字列のは"
5908 "じめの部分を I<double>, I<float>, I<long double> 型の値にそれぞれ変換する。"
5911 #: build/C/man3/strtod.3:94
5913 "The expected form of the (initial portion of the) string is optional leading "
5914 "white space as recognized by B<isspace>(3), an optional plus (\\(aq+\\(aq) "
5915 "or minus sign (\\(aq-\\(aq) and then either (i) a decimal number, or (ii) a "
5916 "hexadecimal number, or (iii) an infinity, or (iv) a NAN (not-a-number)."
5918 "入力する文字列 (の先頭部分) は以下の形式が期待されている。 先頭にホワイトス"
5919 "ペース、 次にプラス (\\(aq+\\(aq) またはマイナス (\\(aq-\\(aq) の記号、 その"
5920 "後に (i) 10 進数、(ii) 16 進数、(iii) 無限、 (iv) NAN (計算できない数、not-a-"
5921 "number) のいずれかがある (ホワイトスペース、符号は省略可能。 ホワイトスペース"
5922 "は B<isspace>(3) で識別される)。"
5925 #: build/C/man3/strtod.3:103
5927 "A I<decimal number> consists of a nonempty sequence of decimal digits "
5928 "possibly containing a radix character (decimal point, locale-dependent, "
5929 "usually \\(aq.\\(aq), optionally followed by a decimal exponent. A decimal "
5930 "exponent consists of an \\(aqE\\(aq or \\(aqe\\(aq, followed by an optional "
5931 "plus or minus sign, followed by a nonempty sequence of decimal digits, and "
5932 "indicates multiplication by a power of 10."
5934 "I<10 進数> は 1 文字以上の 10 進の数字の列からなり、 基を表す文字 (radix "
5935 "charater) (小数点。ロケールに依存するが、通常は \\(aq.\\(aq) が含まれること"
5936 "もある。 この後に 10 進の指数部が続いても良い。 10 進の指数部は \\(aqE\\(aq "
5937 "または \\(aqe\\(aq と、その後に置かれる正負記号 (省略可)、 およびその後に続"
5938 "く 1 文字以上の 10 進の数字の列からなり、 10 の何乗であるかを表す。"
5941 #: build/C/man3/strtod.3:114
5943 "A I<hexadecimal number> consists of a \"0x\" or \"0X\" followed by a "
5944 "nonempty sequence of hexadecimal digits possibly containing a radix "
5945 "character, optionally followed by a binary exponent. A binary exponent "
5946 "consists of a \\(aqP\\(aq or \\(aqp\\(aq, followed by an optional plus or "
5947 "minus sign, followed by a nonempty sequence of decimal digits, and indicates "
5948 "multiplication by a power of 2. At least one of radix character and binary "
5949 "exponent must be present."
5951 "I<16 進数> は、\"0x\" または \"0X\" とその後に続く 1 文字以上の 16 進の数字の"
5952 "列からなり、 基を表す文字が含まれることもある。 この後に 2 進の指数部が続いて"
5953 "も良い。 2 進の指数部は \\(aqP\\(aq または \\(aqp\\(aq と、その後に置かれる正"
5954 "負記号 (省略可)、 およびその後に続く 1 文字以上の 10 進の数字の列から構成さ"
5955 "れ、 2 の何乗であるかを表す。 基を表す文字と 2 進の指数部は、どちらか一方しか"
5959 #: build/C/man3/strtod.3:118
5960 msgid "An I<infinity> is either \"INF\" or \"INFINITY\", disregarding case."
5962 "I<無限> は \"INF\" または \"INFINITY\" で表され、大文字小文字は区別されない。"
5964 #. From glibc 2.8's stdlib/strtod_l.c:
5965 #. We expect it to be a number which is put in the
5966 #. mantissa of the number.
5968 #: build/C/man3/strtod.3:128
5970 "A I<NAN> is \"NAN\" (disregarding case) optionally followed by \\(aq(\\(aq, "
5971 "a sequence of characters, followed by \\(aq)\\(aq. The character string "
5972 "specifies in an implementation-dependent way the type of NAN."
5974 "I<NAN> は \"NAN\" (大文字小文字は区別されない) で表され、 その後に \\(aq"
5975 "(\\(aq 文字列 \\(aq)\\(aq が続く場合もある。 この文字列は実装に依存する NAN "
5979 #: build/C/man3/strtod.3:130
5980 msgid "These functions return the converted value, if any."
5981 msgstr "これらの関数は、変換された値があれば、それを返す。"
5984 #: build/C/man3/strtod.3:137
5986 "If I<endptr> is not NULL, a pointer to the character after the last "
5987 "character used in the conversion is stored in the location referenced by "
5990 "I<endptr> が NULL でないときは、変換に使われた最終文字の次の文字へのポイン"
5991 "ターが I<endptr> で参照される場所へ保存される。"
5994 #: build/C/man3/strtod.3:142
5996 "If no conversion is performed, zero is returned and the value of I<nptr> is "
5997 "stored in the location referenced by I<endptr>."
5999 "変換が行われなかったときには 0 が返る。そして I<endptr> が参照している場所に "
6000 "I<nptr> の値 (変換対象である文字列の開始アドレス) が保存される。"
6003 #: build/C/man3/strtod.3:156
6005 "If the correct value would cause overflow, plus or minus B<HUGE_VAL> "
6006 "(B<HUGE_VALF>, B<HUGE_VALL>) is returned (according to the sign of the "
6007 "value), and B<ERANGE> is stored in I<errno>. If the correct value would "
6008 "cause underflow, zero is returned and B<ERANGE> is stored in I<errno>."
6010 "正しい形式の数値文字列であるが、変換結果がオーバーフローを起こした場合 には、"
6011 "プラスまたはマイナスの B<HUGE_VAL> (B<HUGE_VALF>, B<HUGE_VALL>) が返り (値の"
6012 "符号による)、 B<ERANGE> が I<errno> に代入される。変換結果がアンダーフローを"
6013 "起こした場合には 0 が返り、 B<ERANGE> が I<errno> に代入される。"
6016 #: build/C/man3/strtod.3:157 build/C/man3/strtol.3:151
6017 #: build/C/man3/strtoul.3:155
6023 #: build/C/man3/strtod.3:160
6024 msgid "Overflow or underflow occurred."
6025 msgstr "オーバーフローまたはアンダーフローが起こった。"
6028 #: build/C/man3/strtod.3:165
6029 msgid "C89 describes B<strtod>(), C99 describes the other two functions."
6030 msgstr "C89 では B<strtod>() が、C99 では残りの 2 つの関数が記述されている。"
6033 #: build/C/man3/strtod.3:174
6035 "Since 0 can legitimately be returned on both success and failure, the "
6036 "calling program should set I<errno> to 0 before the call, and then determine "
6037 "if an error occurred by checking whether I<errno> has a nonzero value after "
6040 "成功、失敗どちらの場合でも 0 を返す可能性があるので、 プログラムは呼び出す前"
6041 "に I<errno> を 0 に設定し、呼び出し後に I<errno> が 0 以外の値かどうかを確認"
6042 "しエラーが発生したかどうかを判断する 必要がある。"
6045 #: build/C/man3/strtod.3:179 build/C/man3/strtoul.3:213
6047 "See the example on the B<strtol>(3) manual page; the use of the functions "
6048 "described in this manual page is similar."
6050 "B<strtol>(3) のマニュアルページの例を参照。 このページで説明した関数の使用方"
6054 #: build/C/man3/strtod.3:185
6055 msgid "B<atof>(3), B<atoi>(3), B<atol>(3), B<strtol>(3), B<strtoul>(3)"
6056 msgstr "B<atof>(3), B<atoi>(3), B<atol>(3), B<strtol>(3), B<strtoul>(3)"
6059 #: build/C/man3/strtoimax.3:24
6065 #: build/C/man3/strtoimax.3:24
6071 #: build/C/man3/strtoimax.3:27
6072 msgid "strtoimax, strtoumax - convert string to integer"
6073 msgstr "strtoimax, strtoumax - 文字列を整数に変換する"
6076 #: build/C/man3/strtoimax.3:30
6078 msgid "B<#include E<lt>inttypes.hE<gt>>\n"
6079 msgstr "B<#include E<lt>inttypes.hE<gt>>\n"
6082 #: build/C/man3/strtoimax.3:32
6084 msgid "B<intmax_t strtoimax(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6085 msgstr "B<intmax_t strtoimax(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6088 #: build/C/man3/strtoimax.3:34
6090 msgid "B<uintmax_t strtoumax(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6091 msgstr "B<uintmax_t strtoumax(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6094 #: build/C/man3/strtoimax.3:45
6096 "These functions are just like B<strtol>(3) and B<strtoul>(3), except that "
6097 "they return a value of type I<intmax_t> and I<uintmax_t>, respectively."
6099 "これらの関数はちょうど B<strtol>(3) と B<strtoul>(3) に似ているが、それぞ"
6100 "れ I<intmax_t> と I<uintmax_t> 型の値を返す。"
6103 #: build/C/man3/strtoimax.3:58
6105 "On success, the converted value is returned. If nothing was found to "
6106 "convert, zero is returned. On overflow or underflow B<INTMAX_MAX> or "
6107 "B<INTMAX_MIN> or B<UINTMAX_MAX> is returned, and I<errno> is set to "
6110 "成功した場合、変換された値が返される。 変換するものが見つからなかった場合、0 "
6111 "が返される。 オーバーフローまたはアンダーフローの場合、 B<INTMAX_MAX> または "
6112 "B<INTMAX_MIN> または B<UINTMAX_MAX> が返され、 I<errno> が B<ERANGE> に設定さ"
6116 #: build/C/man3/strtoimax.3:66
6118 "B<imaxabs>(3), B<imaxdiv>(3), B<strtol>(3), B<strtoul>(3), B<wcstoimax>(3)"
6120 "B<imaxabs>(3), B<imaxdiv>(3), B<strtol>(3), B<strtoul>(3), B<wcstoimax>(3)"
6123 #: build/C/man3/strtol.3:31
6129 #: build/C/man3/strtol.3:31
6135 #: build/C/man3/strtol.3:34
6136 msgid "strtol, strtoll, strtoq - convert a string to a long integer"
6137 msgstr "strtol, strtoll, strtoq - 文字列を long int に変換する"
6140 #: build/C/man3/strtol.3:39
6142 msgid "B<long int strtol(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6143 msgstr "B<long int strtol(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6146 #: build/C/man3/strtol.3:42
6148 msgid "B<long long int strtoll(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6149 msgstr "B<long long int strtoll(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6152 #: build/C/man3/strtol.3:51
6153 msgid "B<strtoll>():"
6154 msgstr "B<strtoll>():"
6157 #: build/C/man3/strtol.3:54 build/C/man3/strtoul.3:57
6159 "XOPEN_SOURCE\\ E<gt>=\\ 600 || _BSD_SOURCE || _SVID_SOURCE || _ISOC99_SOURCE "
6160 "|| _POSIX_C_SOURCE\\ E<gt>=\\ 200112L;"
6162 "XOPEN_SOURCE\\ E<gt>=\\ 600 || _BSD_SOURCE || _SVID_SOURCE || _ISOC99_SOURCE "
6163 "|| _POSIX_C_SOURCE\\ E<gt>=\\ 200112L;"
6166 #: build/C/man3/strtol.3:68
6168 "The B<strtol>() function converts the initial part of the string in I<nptr> "
6169 "to a long integer value according to the given I<base>, which must be "
6170 "between 2 and 36 inclusive, or be the special value 0."
6172 "B<strtol>() 関数は、 I<nptr> の文字列の最初の部分を、 I<base> を基数として "
6173 "long int に変換する。 この I<base> は 2 から 36 までの値 あるいは特別な意味を"
6177 #: build/C/man3/strtol.3:81 build/C/man3/strtoul.3:89
6179 "The string may begin with an arbitrary amount of white space (as determined "
6180 "by B<isspace>(3)) followed by a single optional \\(aq+\\(aq or \\(aq-\\(aq "
6181 "sign. If I<base> is zero or 16, the string may then include a \"0x\" "
6182 "prefix, and the number will be read in base 16; otherwise, a zero I<base> is "
6183 "taken as 10 (decimal) unless the next character is \\(aq0\\(aq, in which "
6184 "case it is taken as 8 (octal)."
6186 "文字列の先頭には、任意の数の空白があってもよく (空白は B<isspace>(3) で判定さ"
6187 "れる)、また数字の直前には \\(aq+\\(aq か \\(aq-\\(aq の 符号があってもよい。 "
6188 "I<base> が 0 または 16 の場合には、文字列の先頭に \"0x\" を置くことが でき、"
6189 "その場合には文字列は 16進数として扱われる。 これ以外の文字列で I<base> が 0 "
6190 "の場合は、 文字列が \\(aq0\\(aq で始まるときは 8進数として、 それ以外のとき"
6194 #: build/C/man3/strtol.3:90
6196 "The remainder of the string is converted to a I<long int> value in the "
6197 "obvious manner, stopping at the first character which is not a valid digit "
6198 "in the given base. (In bases above 10, the letter \\(aqA\\(aq in either "
6199 "upper or lower case represents 10, \\(aqB\\(aq represents 11, and so forth, "
6200 "with \\(aqZ\\(aq representing 35.)"
6202 "数字を表す文字列は I<long int> に変換されるが、基数に対して 有効でない数字が"
6203 "現れた時点で変換は終了する。(11進数以上では \\(aqA\\(aq は 大文字・小文字に関"
6204 "わらず 10 を表し、 \\(aqB\\(aq は 11 を表現し、 以下同様に、 \\(aqZ\\(aq は "
6208 #: build/C/man3/strtol.3:111
6210 "If I<endptr> is not NULL, B<strtol>() stores the address of the first "
6211 "invalid character in I<*endptr>. If there were no digits at all, B<strtol>"
6212 "() stores the original value of I<nptr> in I<*endptr> (and returns 0). In "
6213 "particular, if I<*nptr> is not \\(aq\\e0\\(aq but I<**endptr> is \\(aq"
6214 "\\e0\\(aq on return, the entire string is valid."
6216 "I<endptr> がヌル値 (NULL) でない場合は、最初に現れた不正な文字が B<strtol>"
6217 "() によって I<*endptr> に保存されている。 文字列に有効な数字がひとつもなけれ"
6218 "ば、 B<strtol>() は I<nptr> の元の値を I<*endptr> に代入する (そして 0 を返"
6219 "す)。 特に、I<*nptr> が \\(aq\\e0\\(aq 以外で、返された I<**endptr> が \\(aq"
6220 "\\e0\\(aq ならば、文字列全体が有効だったことになる。"
6223 #: build/C/man3/strtol.3:117
6225 "The B<strtoll>() function works just like the B<strtol>() function but "
6226 "returns a long long integer value."
6228 "B<strtoll>() 関数は B<strtol>() と同様だが、long long int 型の値を返す。"
6231 #: build/C/man3/strtol.3:144
6233 "The B<strtol>() function returns the result of the conversion, unless the "
6234 "value would underflow or overflow. If an underflow occurs, B<strtol>() "
6235 "returns B<LONG_MIN>. If an overflow occurs, B<strtol>() returns "
6236 "B<LONG_MAX>. In both cases, I<errno> is set to B<ERANGE>. Precisely the "
6237 "same holds for B<strtoll>() (with B<LLONG_MIN> and B<LLONG_MAX> instead of "
6238 "B<LONG_MIN> and B<LONG_MAX>)."
6240 "アンダーフローもオーバーフローも起きなかった場合、 B<strtol>() 関数は 変換さ"
6241 "れた値を返す。オーバーフローした場合には B<LONG_MAX> が返り、 アンダーフロー"
6242 "した場合には B<LONG_MIN> が返る。オーバーフロー、 アンダーフローのいずれの場"
6243 "合にも 大域変数 I<errno> には B<ERANGE> が設定される。 B<strtoll>() も同様で"
6244 "あるが、 B<LONG_MIN> と B<LONG_MAX> の代わりに B<LLONG_MIN> と B<LLONG_MAX> "
6248 #: build/C/man3/strtol.3:151 build/C/man3/strtoul.3:155
6249 msgid "(not in C99) The given I<base> contains an unsupported value."
6250 msgstr "(C99 にはない) 指定された I<base> がサポートされていない値である。"
6253 #: build/C/man3/strtol.3:154 build/C/man3/strtoul.3:158
6254 msgid "The resulting value was out of range."
6255 msgstr "結果の値が範囲外である。"
6258 #: build/C/man3/strtol.3:161 build/C/man3/strtoul.3:165
6260 "The implementation may also set I<errno> to B<EINVAL> in case no conversion "
6261 "was performed (no digits seen, and 0 returned)."
6263 "実装によっては、変換が行われなかった場合 (数字がなく、0 を返した場合)、 "
6264 "I<errno> に B<EINVAL> が設定される場合がある。"
6267 #: build/C/man3/strtol.3:166
6269 "B<strtol>() conforms to SVr4, 4.3BSD, C89, C99 and POSIX.1-2001, and "
6270 "B<strtoll>() to C99 and POSIX.1-2001."
6272 "B<strtol>() は SVr4, 4.3BSD, C89, C99 と POSIX.1-2001 に準拠している。 "
6273 "B<strtoll>() は C99 と POSIX.1-2001 に準拠している。"
6276 #: build/C/man3/strtol.3:184
6278 "Since B<strtol>() can legitimately return 0, B<LONG_MAX>, or B<LONG_MIN> "
6279 "(B<LLONG_MAX> or B<LLONG_MIN> for B<strtoll>()) on both success and "
6280 "failure, the calling program should set I<errno> to 0 before the call, and "
6281 "then determine if an error occurred by checking whether I<errno> has a "
6282 "nonzero value after the call."
6284 "B<strtol ()> からは成功、失敗どちらの場合でも 0, B<LONG_MAX>, B<LONG_MIN> "
6285 "(B<strtoll>() では B<LLONG_MAX>, B<LLONG_MIN>) が返る可能性があるので、 プ"
6286 "ログラムは関数を呼び出す前に I<errno> を 0 に設定し、呼び出し後に I<errno> "
6287 "が 0 以外の値かどうかを確認しエラーが発生したかどうかを判断する 必要がある。"
6290 #: build/C/man3/strtol.3:189
6292 "According to POSIX.1-2001, in locales other than the \"C\" and \"POSIX\", "
6293 "these functions may accept other, implementation-defined numeric strings."
6295 "POSIX.1-2001 では、 \"C\" と \"POSIX\" 以外のロケールでは、これらの関数は、他"
6296 "の実装時に定義される数字を示す文字列を受け付けるとされている。"
6299 #: build/C/man3/strtol.3:191 build/C/man3/strtoul.3:190
6300 msgid "BSD also has"
6304 #: build/C/man3/strtol.3:195
6306 msgid "B<quad_t strtoq(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6307 msgstr "B<quad_t strtoq(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6310 #: build/C/man3/strtol.3:204
6312 "with completely analogous definition. Depending on the wordsize of the "
6313 "current architecture, this may be equivalent to B<strtoll>() or to B<strtol>"
6316 "という完全に同様の定義を持つ関数がある。 使用中のアーキテクチャのワード長次第"
6317 "であるが、この関数は B<strtoll>() か B<strtol>() と等価となることもある。"
6320 #: build/C/man3/strtol.3:218
6322 "The program shown below demonstrates the use of B<strtol>(). The first "
6323 "command-line argument specifies a string from which B<strtol>() should "
6324 "parse a number. The second (optional) argument specifies the base to be "
6325 "used for the conversion. (This argument is converted to numeric form using "
6326 "B<atoi>(3), a function that performs no error checking and has a simpler "
6327 "interface than B<strtol>().) Some examples of the results produced by this "
6328 "program are the following:"
6330 "以下のプログラムは B<strtol>() の使用例である。 最初のコマンドライン引き数に"
6331 "は B<strtol>() が数字として解釈する文字列を指定する。 (省略可能な) 二番目の"
6332 "引き数には 変換に使用される基数を指定する (この引き数は B<atoi>(3) を使って"
6333 "数値に変換される。 B<atoi>(3) は B<strtol>() よりも簡単なインタフェースを持"
6334 "つ関数で、 その中ではエラーチェックは行われない)。 このプログラムの実行例をい"
6338 #: build/C/man3/strtol.3:234
6341 "$B< ./a.out 123>\n"
6342 "strtol() returned 123\n"
6343 "$B< ./a.out \\(aq 123\\(aq>\n"
6344 "strtol() returned 123\n"
6345 "$B< ./a.out 123abc>\n"
6346 "strtol() returned 123\n"
6347 "Further characters after number: abc\n"
6348 "$B< ./a.out 123abc 55>\n"
6349 "strtol: Invalid argument\n"
6350 "$B< ./a.out \\(aq\\(aq>\n"
6351 "No digits were found\n"
6352 "$B< ./a.out 4000000000>\n"
6353 "strtol: Numerical result out of range\n"
6355 "$B< ./a.out 123>\n"
6356 "strtol() returned 123\n"
6357 "$B< ./a.out \\(aq 123\\(aq>\n"
6358 "strtol() returned 123\n"
6359 "$B< ./a.out 123abc>\n"
6360 "strtol() returned 123\n"
6361 "Further characters after number: abc\n"
6362 "$B< ./a.out 123abc 55>\n"
6363 "strtol: Invalid argument\n"
6364 "$B< ./a.out \\(aq\\(aq>\n"
6365 "No digits were found\n"
6366 "$B< ./a.out 4000000000>\n"
6367 "strtol: Numerical result out of range\n"
6370 #: build/C/man3/strtol.3:236
6372 msgid "Program source"
6376 #: build/C/man3/strtol.3:243
6379 "#include E<lt>stdlib.hE<gt>\n"
6380 "#include E<lt>limits.hE<gt>\n"
6381 "#include E<lt>stdio.hE<gt>\n"
6382 "#include E<lt>errno.hE<gt>\n"
6384 "#include E<lt>stdlib.hE<gt>\n"
6385 "#include E<lt>limits.hE<gt>\n"
6386 "#include E<lt>stdio.hE<gt>\n"
6387 "#include E<lt>errno.hE<gt>\n"
6390 #: build/C/man3/strtol.3:250
6394 "main(int argc, char *argv[])\n"
6397 " char *endptr, *str;\n"
6401 "main(int argc, char *argv[])\n"
6404 " char *endptr, *str;\n"
6408 #: build/C/man3/strtol.3:255
6411 " if (argc E<lt> 2) {\n"
6412 " fprintf(stderr, \"Usage: %s str [base]\\en\", argv[0]);\n"
6413 " exit(EXIT_FAILURE);\n"
6416 " if (argc E<lt> 2) {\n"
6417 " fprintf(stderr, \"Usage: %s str [base]\\en\", argv[0]);\n"
6418 " exit(EXIT_FAILURE);\n"
6422 #: build/C/man3/strtol.3:258
6426 " base = (argc E<gt> 2) ? atoi(argv[2]) : 10;\n"
6429 " base = (argc E<gt> 2) ? atoi(argv[2]) : 10;\n"
6432 #: build/C/man3/strtol.3:261
6435 " errno = 0; /* To distinguish success/failure after call */\n"
6436 " val = strtol(str, &endptr, base);\n"
6438 " errno = 0; /* To distinguish success/failure after call */\n"
6439 " val = strtol(str, &endptr, base);\n"
6442 #: build/C/man3/strtol.3:263
6444 msgid " /* Check for various possible errors */\n"
6445 msgstr " /* Check for various possible errors */\n"
6448 #: build/C/man3/strtol.3:269
6451 " if ((errno == ERANGE && (val == LONG_MAX || val == LONG_MIN))\n"
6452 " || (errno != 0 && val == 0)) {\n"
6453 " perror(\"strtol\");\n"
6454 " exit(EXIT_FAILURE);\n"
6457 " if ((errno == ERANGE && (val == LONG_MAX || val == LONG_MIN))\n"
6458 " || (errno != 0 && val == 0)) {\n"
6459 " perror(\"strtol\");\n"
6460 " exit(EXIT_FAILURE);\n"
6464 #: build/C/man3/strtol.3:274
6467 " if (endptr == str) {\n"
6468 " fprintf(stderr, \"No digits were found\\en\");\n"
6469 " exit(EXIT_FAILURE);\n"
6472 " if (endptr == str) {\n"
6473 " fprintf(stderr, \"No digits were found\\en\");\n"
6474 " exit(EXIT_FAILURE);\n"
6478 #: build/C/man3/strtol.3:276
6480 msgid " /* If we got here, strtol() successfully parsed a number */\n"
6481 msgstr " /* If we got here, strtol() successfully parsed a number */\n"
6484 #: build/C/man3/strtol.3:278
6486 msgid " printf(\"strtol() returned %ld\\en\", val);\n"
6487 msgstr " printf(\"strtol() returned %ld\\en\", val);\n"
6490 #: build/C/man3/strtol.3:281
6493 " if (*endptr != \\(aq\\e0\\(aq) /* Not necessarily an error... */\n"
6494 " printf(\"Further characters after number: %s\\en\", endptr);\n"
6496 " if (*endptr != \\(aq\\e0\\(aq) /* Not necessarily an error... */\n"
6497 " printf(\"Further characters after number: %s\\en\", endptr);\n"
6500 #: build/C/man3/strtol.3:291
6501 msgid "B<atof>(3), B<atoi>(3), B<atol>(3), B<strtod>(3), B<strtoul>(3)"
6502 msgstr "B<atof>(3), B<atoi>(3), B<atol>(3), B<strtod>(3), B<strtoul>(3)"
6505 #: build/C/man3/strtoul.3:33
6511 #: build/C/man3/strtoul.3:33
6517 #: build/C/man3/strtoul.3:36
6519 "strtoul, strtoull, strtouq - convert a string to an unsigned long integer"
6520 msgstr "strtoul, strtoull, strtouq - 文字列を unsigned long int に変換する"
6523 #: build/C/man3/strtoul.3:42
6525 msgid "B<unsigned long int strtoul(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6526 msgstr "B<unsigned long int strtoul(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6529 #: build/C/man3/strtoul.3:45
6532 "B<unsigned long long int strtoull(const char *>I<nptr>B<, char **>I<endptr>B<,>\n"
6533 "B< int >I<base>B<);>\n"
6535 "B<unsigned long long int strtoull(const char *>I<nptr>B<, char **>I<endptr>B<,>\n"
6536 "B< int >I<base>B<);>\n"
6539 #: build/C/man3/strtoul.3:54
6540 msgid "B<strtoull>():"
6541 msgstr "B<strtoull>():"
6544 #: build/C/man3/strtoul.3:75
6546 "The B<strtoul>() function converts the initial part of the string in "
6547 "I<nptr> to an I<unsigned long int> value according to the given I<base>, "
6548 "which must be between 2 and 36 inclusive, or be the special value 0."
6550 "B<strtoul>() 関数は、 I<nptr> の文字列の最初の部分を、 I<base> を基数として "
6551 "I<unsigned long int> に変換する。 この I<base> は 2 から 36 までの値 あるいは"
6552 "特別な意味を持つ値 0 でなければならない。"
6555 #: build/C/man3/strtoul.3:98
6557 "The remainder of the string is converted to an I<unsigned long int> value in "
6558 "the obvious manner, stopping at the first character which is not a valid "
6559 "digit in the given base. (In bases above 10, the letter \\(aqA\\(aq in "
6560 "either upper or lower case represents 10, \\(aqB\\(aq represents 11, and so "
6561 "forth, with \\(aqZ\\(aq representing 35.)"
6563 "文字列の残りの部分は I<unsigned long int> に変換されるが、基数に対して 有効で"
6564 "ない数字が現れた時点で変換は終了する。(11進数以上では \\(aqA\\(aq は 大文字・"
6565 "小文字に関わらず 10 を表し、 \\(aqB\\(aq は 11 を表現し, 以下同様に、 \\(aqZ"
6569 #: build/C/man3/strtoul.3:119
6571 "If I<endptr> is not NULL, B<strtoul>() stores the address of the first "
6572 "invalid character in I<*endptr>. If there were no digits at all, B<strtoul>"
6573 "() stores the original value of I<nptr> in I<*endptr> (and returns 0). In "
6574 "particular, if I<*nptr> is not \\(aq\\e0\\(aq but I<**endptr> is \\(aq"
6575 "\\e0\\(aq on return, the entire string is valid."
6577 "I<endptr> がヌル値 (NULL) でない場合、 B<strtoul>() は最初に不正な文字が現れ"
6578 "たアドレスを I<*endptr> に格納している。 文字列に有効な数字がひとつもなけれ"
6579 "ば、 B<strtoul>() は I<nptr> の元の値を I<*endptr> に代入する(そして 0 を返"
6580 "す)。 特に、 I<*nptr> が \\(aq\\e0\\(aq 以外で、返された I<**endptr> が \\(aq"
6581 "\\e0\\(aq ならば、文字列全体が有効だったことになる。"
6584 #: build/C/man3/strtoul.3:127
6586 "The B<strtoull>() function works just like the B<strtoul>() function but "
6587 "returns an I<unsigned long long int> value."
6589 "B<strtoull>() 関数は B<strtoul>() 関数と同様だが、 I<unsigned long long "
6593 #: build/C/man3/strtoul.3:148
6595 "The B<strtoul>() function returns either the result of the conversion or, "
6596 "if there was a leading minus sign, the negation of the result of the "
6597 "conversion represented as an unsigned value, unless the original "
6598 "(nonnegated) value would overflow; in the latter case, B<strtoul>() returns "
6599 "B<ULONG_MAX> and sets I<errno> to B<ERANGE>. Precisely the same holds for "
6600 "B<strtoull>() (with B<ULLONG_MAX> instead of B<ULONG_MAX>)."
6602 "B<strtoul>() 関数は変換結果を返す。文字列がマイナス符号から始まっていた場 合"
6603 "は、(符号反転前の値がオーバーフローしていなければ) 変換結果を符号反転した 値"
6604 "を unsigned 型で返す。変換でオーバーフローが発生した場合は B<ULONG_MAX> を返"
6605 "し、 I<errno> に B<ERANGE> を設定する。 (B<ULONG_MAX> を B<ULLONG_MAX> と読み"
6606 "替えれば) B<strtoull>() は B<strtoul>() と全く同じである。"
6609 #: build/C/man3/strtoul.3:170
6611 "B<strtoul>() conforms to SVr4, C89, C99 and POSIX-2001, and B<strtoull>() "
6612 "to C99 and POSIX.1-2001."
6614 "B<strtoul>() は SVr4, C89, C99 と POSIX-2001 に準拠している。 B<strtoull>"
6615 "() は C99 と POSIX.1-2001 に準拠している。"
6618 #: build/C/man3/strtoul.3:184
6620 "Since B<strtoul>() can legitimately return 0 or B<ULONG_MAX> (B<ULLONG_MAX> "
6621 "for B<strtoull>()) on both success and failure, the calling program should "
6622 "set I<errno> to 0 before the call, and then determine if an error occurred "
6623 "by checking whether I<errno> has a nonzero value after the call."
6625 "B<strtoul ()> からは成功、失敗どちらの場合でも 0 や B<ULONG_MAX> (B<strtoull>"
6626 "() では B<ULLONG_MAX>) が返る可能性があるので、 プログラムは関数を呼び出す"
6627 "前に I<errno> を 0 に設定し、呼び出し後に I<errno> が 0 以外の値かどうかを確"
6628 "認しエラーが発生したかどうかを判断する 必要がある。"
6631 #: build/C/man3/strtoul.3:188
6633 "In locales other than the \"C\" locale, other strings may be accepted. (For "
6634 "example, the thousands separator of the current locale may be supported.)"
6636 "\"C\" 以外のロケールの場合、その他の文字列も受け付けられるかもしれない。 (例"
6637 "えば、現在のロケールの 1000 毎の区切り文字に対応しているかもしれない。)"
6640 #: build/C/man3/strtoul.3:194
6642 msgid "B<u_quad_t strtouq(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6643 msgstr "B<u_quad_t strtouq(const char *>I<nptr>B<, char **>I<endptr>B<, int >I<base>B<);>\n"
6646 #: build/C/man3/strtoul.3:203
6648 "with completely analogous definition. Depending on the wordsize of the "
6649 "current architecture, this may be equivalent to B<strtoull>() or to "
6652 "という完全に同様の定義を持つ関数がある。 使用中のアーキテクチャのワード長次第"
6653 "であるが、この関数は B<strtoull>() や B<stroul>() と等価な場合もありえる。"
6656 #: build/C/man3/strtoul.3:208
6658 "Negative values are considered valid input and are silently converted to the "
6659 "equivalent I<unsigned long int> value."
6661 "負の値も正当な入力とみなされ、エラーもなく、 対応する I<unsigned long int> 型"
6665 #: build/C/man3/strtoul.3:219
6666 msgid "B<atof>(3), B<atoi>(3), B<atol>(3), B<strtod>(3), B<strtol>(3)"
6667 msgstr "B<atof>(3), B<atoi>(3), B<atol>(3), B<strtod>(3), B<strtol>(3)"
6670 #: build/C/man3/system.3:30
6676 #: build/C/man3/system.3:30
6682 #: build/C/man3/system.3:33
6683 msgid "system - execute a shell command"
6684 msgstr "system - シェルコマンドの実行"
6687 #: build/C/man3/system.3:38
6689 msgid "B<int system(const char *>I<command>B<);>\n"
6690 msgstr "B<int system(const char *>I<command>B<);>\n"
6693 #: build/C/man3/system.3:54
6695 "B<system>() executes a command specified in I<command> by calling B</bin/sh "
6696 "-c> I<command>, and returns after the command has been completed. During "
6697 "execution of the command, B<SIGCHLD> will be blocked, and B<SIGINT> and "
6698 "B<SIGQUIT> will be ignored."
6700 "B<system>() は I<command> で指定したコマンドを B</bin/sh -c> I<command> の形"
6701 "で実行する。指定したコマンドが終了すればこの関数も終了する。 コマンド実行中"
6702 "は、 B<SIGCHLD> はブロックされ、 B<SIGINT> と B<SIGQUIT> は無視される。"
6705 #: build/C/man3/system.3:69
6707 "The value returned is -1 on error (e.g., B<fork>(2) failed), and the return "
6708 "status of the command otherwise. This latter return status is in the format "
6709 "specified in B<wait>(2). Thus, the exit code of the command will be "
6710 "I<WEXITSTATUS(status)>. In case I</bin/sh> could not be executed, the exit "
6711 "status will be that of a command that does I<exit(127)>."
6713 "エラーが発生した場合 (B<fork>(2) に失敗した場合など)、-1 を返す。 そうでなけ"
6714 "れば、コマンドのステータスを返す。 後者の場合、ステータスは B<wait>(2) で定"
6715 "義されているフォーマットで返ってくる。 従って、コマンドの終了コードは "
6716 "I<WEXITSTATUS(status)> で得ることが出来る。 I</bin/sh> が実行出来なかった場"
6717 "合、 終了ステータスはコマンドが I<exit(127)> を実行した場合と同じになる。"
6720 #: build/C/man3/system.3:75
6722 "If the value of I<command> is NULL, B<system>() returns nonzero if the "
6723 "shell is available, and zero if not."
6725 "I<command> の値が NULL のときは、 B<system>() はシェルが利用可能ならゼロ以外"
6726 "の値を返し、利用不可ならゼロを返す。"
6729 #: build/C/man3/system.3:78
6730 msgid "B<system>() does not affect the wait status of any other children."
6731 msgstr "B<system>() は他の子プロセスのウエイトステータスには影響を与えない。"
6734 #: build/C/man3/system.3:80
6735 msgid "C89, C99, POSIX.1-2001."
6736 msgstr "C89, C99, POSIX.1-2001."
6739 #: build/C/man3/system.3:93
6741 "If the B<_XOPEN_SOURCE> feature test macro is defined (before including "
6742 "I<any> header files), then the macros described in B<wait>(2) "
6743 "(B<WEXITSTATUS>(), etc.) are made available when including I<E<lt>stdlib."
6746 "(「どの」ヘッダファイルをインクルードするよりも前に) 機能検査マクロ "
6747 "B<_XOPEN_SOURCE> が定義された場合には、 B<wait>(2) で説明されているマクロ群 "
6748 "(B<WEXITSTATUS>() 等) が I<E<lt>stdlib.hE<gt>> をインクルードすると利用可能"
6752 #: build/C/man3/system.3:104
6754 "As mentioned, B<system>() ignores B<SIGINT> and B<SIGQUIT>. This may make "
6755 "programs that call it from a loop uninterruptible, unless they take care "
6756 "themselves to check the exit status of the child. E.g."
6758 "既に述べたように、 B<system>() は B<SIGINT> と B<SIGQUIT> を無視する。 よっ"
6759 "てループから B<system>() を呼ぶプログラムは、 以下の例のように子プロセスの終"
6760 "了状態を自分でチェックしておかないと、 中断できなくなるかもしれない。"
6763 #: build/C/man3/system.3:109
6766 " while (something) {\n"
6767 " int ret = system(\"foo\");\n"
6769 " while (something) {\n"
6770 " int ret = system(\"foo\");\n"
6773 #: build/C/man3/system.3:114
6776 " if (WIFSIGNALED(ret) &&\n"
6777 " (WTERMSIG(ret) == SIGINT || WTERMSIG(ret) == SIGQUIT))\n"
6781 " if (WIFSIGNALED(ret) &&\n"
6782 " (WTERMSIG(ret) == SIGINT || WTERMSIG(ret) == SIGQUIT))\n"
6787 #: build/C/man3/system.3:134
6789 "Do not use B<system>() from a program with set-user-ID or set-group-ID "
6790 "privileges, because strange values for some environment variables might be "
6791 "used to subvert system integrity. Use the B<exec>(3) family of functions "
6792 "instead, but not B<execlp>(3) or B<execvp>(3). B<system>() will not, in "
6793 "fact, work properly from programs with set-user-ID or set-group-ID "
6794 "privileges on systems on which I</bin/sh> is bash version 2, since bash 2 "
6795 "drops privileges on startup. (Debian uses a modified bash which does not do "
6796 "this when invoked as B<sh>.)"
6798 "set-user-ID や set-group-ID の特権をもつプログラムの中では B<system>() を"
6799 "使ってはいけない。なぜなら、ある環境変数の未知の値によって システムの安全が損"
6800 "なわれるからである。代わりに B<exec>(3) 関連の関数群の中で B<execlp>(3) と "
6801 "B<execvp>(3) 以外の関数を使用すべきである。 実際のところ、 B<system>() は "
6802 "I</bin/sh> が bash バージョン 2 であるシステムでは、 set-user-ID や set-"
6803 "group-ID の特権を持つプログラムからは正しく動作しない。 なぜなら、bash バー"
6804 "ジョン 2 はスタートアップ時に特権を落とすからである。 (Debian では、sh として"
6805 "起動された時にはこのような動作を行なわないように 修正された bash を用いてい"
6809 #: build/C/man3/system.3:148
6811 "In versions of glibc before 2.1.3, the check for the availability of I</bin/"
6812 "sh> was not actually performed if I<command> was NULL; instead it was always "
6813 "assumed to be available, and B<system>() always returned 1 in this case. "
6814 "Since glibc 2.1.3, this check is performed because, even though POSIX.1-2001 "
6815 "requires a conforming implementation to provide a shell, that shell may not "
6816 "be available or executable if the calling program has previously called "
6817 "B<chroot>(2) (which is not specified by POSIX.1-2001)."
6819 "glibc 2.1.3 より前のバージョンでは、 I<command> が NULL の場合に I</bin/sh> "
6820 "が利用可能かどうかのチェックは実際には行わず、 いつでも利用可能であるとみなし"
6821 "ていた。 B<system>() はこの場合に常に 1 を返していた。 POSIX.1-2001 ではシェ"
6822 "ルが提供されているという標準に準拠した実装を 要求しているが、glibc 2.1.3 以降"
6823 "ではシェルのチェックを実行している。 なぜなら、呼び出し元のプログラムが "
6824 "B<system>() を呼び出すより前に (POSIX.1-2001 では規定されていない) "
6825 "B<chroot>(2) を呼び出していた時には、シェルが利用可能でない場合や実行可能"
6826 "ファイル でない場合があるからである。"
6829 #: build/C/man3/system.3:153
6831 "It is possible for the shell command to return 127, so that code is not a "
6832 "sure indication that the B<execve>(2) call failed."
6834 "実行したシェルコマンドが 127 (B</bin/sh> の呼び出しに失敗した時に返す値) を返"
6835 "すことも考えられる。 そのため、プログラムは (リターンコードを見るだけでは) "
6836 "B<execve>(2) の呼び出しが失敗したことを確実に知ることはできない。"
6839 #: build/C/man3/system.3:158
6840 msgid "B<sh>(1), B<signal>(2), B<wait>(2), B<exec>(3)"
6841 msgstr "B<sh>(1), B<signal>(2), B<wait>(2), B<exec>(3)"
6844 #: build/C/man3/wcstombs.3:16
6850 #: build/C/man3/wcstombs.3:16
6856 #: build/C/man3/wcstombs.3:19
6857 msgid "wcstombs - convert a wide-character string to a multibyte string"
6858 msgstr "wcstombs - ワイド文字列をマルチバイト文字列に変換する"
6861 #: build/C/man3/wcstombs.3:24
6863 msgid "B<size_t wcstombs(char *>I<dest>B<, const wchar_t *>I<src>B<, size_t >I<n>B<);>\n"
6864 msgstr "B<size_t wcstombs(char *>I<dest>B<, const wchar_t *>I<src>B<, size_t >I<n>B<);>\n"
6867 #: build/C/man3/wcstombs.3:42
6869 "If I<dest> is not a NULL pointer, the B<wcstombs>() function converts the "
6870 "wide-character string I<src> to a multibyte string starting at I<dest>. At "
6871 "most I<n> bytes are written to I<dest>. The conversion starts in the "
6872 "initial state. The conversion can stop for three reasons:"
6874 "I<dest> が NULL ポインタでない場合、 B<wcstombs>() 関数は ワイド文字列 "
6875 "I<src> を I<dest> から始まるマルチバイト文字列に 変換する。I<dest> には最大"
6876 "で I<n> バイトが書き込まれる。 変換は初期状態で開始される。変換は以下の3つの"
6880 #: build/C/man3/wcstombs.3:48
6882 "1. A wide character has been encountered that can not be represented as a "
6883 "multibyte sequence (according to the current locale). In this case I<"
6884 "(size_t)\\ -1> is returned."
6886 "1. (現在のロケールにおける)マルチバイト列で表現できないワイド文字に 遭遇した"
6887 "場合。この場合には I<(size_t)\\ -1> が返される。"
6890 #: build/C/man3/wcstombs.3:53
6892 "2. The length limit forces a stop. In this case the number of bytes written "
6893 "to I<dest> is returned, but the shift state at this point is lost."
6895 "2. 長さ制限によって強制停止させられた場合。この場合には I<dest> に 書き込まれ"
6896 "たバイト数が返される。しかしこの時点でのシフト状態は失われる。"
6899 #: build/C/man3/wcstombs.3:60
6901 "3. The wide-character string has been completely converted, including the "
6902 "terminating null wide character (L\\(aq\\e0\\(aq). In this case the "
6903 "conversion ends in the initial state. The number of bytes written to "
6904 "I<dest>, excluding the terminating null byte (\\(aq\\e0\\(aq), is returned."
6906 "3. ワイド文字列が終端の NULL ワイド文字 (L\\(aq\\e0\\(aq) を含めて完全に変換"
6908 "この場合には変換は初期状態で終了し、 I<dest> に書き込まれたバイト数を返す\n"
6909 "(終端の NULL バイト (\\(aq\\e0\\(aq) は含まれない)。"
6912 #: build/C/man3/wcstombs.3:66
6914 "The programmer must ensure that there is room for at least I<n> bytes at "
6917 "プログラマーは I<dest> に最低でも I<n> バイトの空きがあることを 保証しなけれ"
6921 #: build/C/man3/wcstombs.3:74
6923 "If I<dest> is NULL, I<n> is ignored, and the conversion proceeds as above, "
6924 "except that the converted bytes are not written out to memory, and that no "
6925 "length limit exists."
6927 "I<dest> が NULL の場合、I<n> は無視される。上記と同様に変換が行 なわれるが変"
6928 "換結果のバイト列はメモリには書き込まれない。 また長さの上限が存在しない。"
6931 #: build/C/man3/wcstombs.3:79
6933 "In order to avoid the case 2 above, the programmer should make sure I<n> is "
6934 "greater or equal to I<wcstombs(NULL,src,0)+1>."
6936 "上記の 2. の場合を避けるために、プログラマーは I<n> が I<wcstombs(NULL,"
6937 "src,0)+1> 以上であることを保証しなければならない。"
6940 #: build/C/man3/wcstombs.3:88
6942 "The B<wcstombs>() function returns the number of bytes that make up the "
6943 "converted part of multibyte sequence, not including the terminating null "
6944 "byte. If a wide character was encountered which could not be converted, I<"
6945 "(size_t)\\ -1> is returned."
6947 "B<wcstombs>() 関数は生成したマルチバイト列のバイト数を返す。終端の ナル文字"
6948 "は含まない。もし変換できないワイド文字に遭遇した場合には I<(size_t)\\ -1> を"
6952 #: build/C/man3/wcstombs.3:97
6954 "The behavior of B<wcstombs>() depends on the B<LC_CTYPE> category of the "
6957 "B<wcstombs>() の動作は現在のロケールの B<LC_CTYPE> カテゴリに依存している。"
6960 #: build/C/man3/wcstombs.3:102
6962 "The function B<wcsrtombs>(3) provides a thread safe interface to the same "
6965 "B<wcsrtombs>() 関数は同じ機能のためのスレッド・セーフな インターフェースを提"
6969 #: build/C/man3/wcstombs.3:105
6970 msgid "B<mbstowcs>(3), B<wcsrtombs>(3)"
6971 msgstr "B<mbstowcs>(3), B<wcsrtombs>(3)"
6974 #: build/C/man3/wctomb.3:16
6980 #: build/C/man3/wctomb.3:16
6986 #: build/C/man3/wctomb.3:19
6987 msgid "wctomb - convert a wide character to a multibyte sequence"
6988 msgstr "wctomb - ワイド文字をマルチバイト列に変換する。"
6991 #: build/C/man3/wctomb.3:24
6993 msgid "B<int wctomb(char *>I<s>B<, wchar_t >I<wc>B<);>\n"
6994 msgstr "B<int wctomb(char *>I<s>B<, wchar_t >I<wc>B<);>\n"
6997 #: build/C/man3/wctomb.3:45
6999 "If I<s> is not NULL, the B<wctomb>() function converts the wide character "
7000 "I<wc> to its multibyte representation and stores it at the beginning of the "
7001 "character array pointed to by I<s>. It updates the shift state, which is "
7002 "stored in a static anonymous variable known only to the B<wctomb>() "
7003 "function, and returns the length of said multibyte representation, that is, "
7004 "the number of bytes written at I<s>."
7006 "I<s> が NULL でなければ、 B<wctomb>() 関数はワイド文字 I<wc> を マルチバイト"
7007 "表現に変換して I<s> の指す文字配列に格納する。 同時に wctomb 関数のみが使用す"
7008 "る静的で名前のないシフト状態を更新する。 この関数はマルチバイト表現の長さ、す"
7009 "なわち I<s> に書き込まれた バイト数を返す。"
7012 #: build/C/man3/wctomb.3:51
7014 "The programmer must ensure that there is room for at least B<MB_CUR_MAX> "
7017 "プログラマーは I<s> に少なくとも B<MB_CUR_MAX> バイトの空きがあることを保証し"
7020 #. The Dinkumware doc and the Single UNIX specification say this, but
7021 #. glibc doesn't implement this.
7023 #: build/C/man3/wctomb.3:63
7025 "If I<s> is NULL, the B<wctomb>() function resets the shift state, known "
7026 "only to this function, to the initial state, and returns nonzero if the "
7027 "encoding has nontrivial shift state, or zero if the encoding is stateless."
7029 "I<s> が NULL ならば、 B<wctomb>() 関数は自分のみが使用するシフト状態を 初期"
7030 "状態に戻して、文字符号がシフト状態に依存しているならばゼロ以外を シフト状態に"
7034 #: build/C/man3/wctomb.3:77
7036 "If I<s> is not NULL, the B<wctomb>() function returns the number of bytes "
7037 "that have been written to the byte array at I<s>. If I<wc> can not be "
7038 "represented as a multibyte sequence (according to the current locale), -1 is "
7041 "I<s> が NULL でない場合 B<wctomb>() 関数はバイト配列 I<s> に 書き込まれたバ"
7042 "イト数を返す。I<wc> が(現在のロケールにおいて) マルチバイト列で表現できない"
7046 #: build/C/man3/wctomb.3:84
7048 "If I<s> is NULL, the B<wctomb>() function returns nonzero if the encoding "
7049 "has nontrivial shift state, or zero if the encoding is stateless."
7051 "I<s> が NULL の場合 B<wctomb>() 関数は文字符号がシフト状態に 依存している場"
7052 "合にはゼロ以外、シフト状態に依存しない場合はゼロを返す。"
7055 #: build/C/man3/wctomb.3:93
7057 "The behavior of B<wctomb>() depends on the B<LC_CTYPE> category of the "
7060 "B<wctomb>() 関数の動作は現在のロケールの B<LC_CTYPE> カテゴリに依存してい"
7064 #: build/C/man3/wctomb.3:99
7066 "This function is not multithread safe. The function B<wcrtomb>(3) provides "
7067 "a better interface to the same functionality."
7069 "この関数はマルチスレッドでは安全ではない。 B<wcrtomb>(3) 関数は 同じ機能のよ"
7073 #: build/C/man3/wctomb.3:103
7074 msgid "B<MB_CUR_MAX>(3), B<wcrtomb>(3), B<wcstombs>(3)"
7075 msgstr "B<MB_CUR_MAX>(3), B<wcrtomb>(3), B<wcstombs>(3)"
7078 #~ "The B<putenv>() function returns zero on success, or nonzero if an error "
7081 #~ "B<putenv>() 関数は、成功した場合 0 を、 エラーが発生した場合 0 以外を返"
7085 #~ "The B<random>() function returns a value between 0 and B<RAND_MAX>. The "
7086 #~ "B<srandom>() function returns no value. The B<initstate>() function "
7087 #~ "returns a pointer to the previous state array. The B<setstate>() "
7088 #~ "function returns a pointer to the previous state array, or NULL on error."
7090 #~ "B<random>() 関数は 0 と B<RAND_MAX> の間の値を返す。 B<srandom>() 関数は"
7091 #~ "値を返さない。 B<initstate>() 関数は直前の状態配列へのポインタを返す。 "
7092 #~ "B<setstate>() 関数は直前の状態配列へのポインタを返し、 エラーの場合は "
7095 #~ msgid "2008-03-07"
7096 #~ msgstr "2008-03-07"
7098 #~ msgid "All of these functions return 0 on success, or -1 on error."
7099 #~ msgstr "これらの関数は、成功すると 0 を返し、 エラーの場合は -1 を返す。"
7102 #~ "In locales other than the \"C\" locale, other strings may also be "
7103 #~ "accepted. (For example, the thousands separator of the current locale "
7104 #~ "may be supported.)"
7106 #~ "\"C\" 以外のロケールの場合、その他の文字列も受け付けられるかもしれない。 "
7107 #~ "(例えば、現在のロケールの 1000 毎の区切り文字がサポートされているかもしれ"
7111 #~ "Recent versions of Linux libc (later than 5.4.23) and glibc (2.x) "
7112 #~ "include a B<malloc>() implementation which is tunable via environment "
7113 #~ "variables. When B<MALLOC_CHECK_> is set, a special (less efficient) "
7114 #~ "implementation is used which is designed to be tolerant against simple "
7115 #~ "errors, such as double calls of B<free>() with the same argument, or "
7116 #~ "overruns of a single byte (off-by-one bugs). Not all such errors can be "
7117 #~ "protected against, however, and memory leaks can result. If "
7118 #~ "B<MALLOC_CHECK_> is set to 0, any detected heap corruption is silently "
7119 #~ "ignored; if set to 1, a diagnostic message is printed on I<stderr>; if "
7120 #~ "set to 2, B<abort>(3) is called immediately; if set to 3, a diagnostic "
7121 #~ "message is printed on I<stderr> and the program is aborted. Using a "
7122 #~ "nonzero B<MALLOC_CHECK_> value can be useful because otherwise a crash "
7123 #~ "may happen much later, and the true cause for the problem is then very "
7124 #~ "hard to track down."
7126 #~ "最近のバージョンの Linux libc (5.4.23 以降) と glibc (2.x) では、 "
7127 #~ "B<malloc>() の動作を環境変数によって制御できるような実装がされている。 "
7128 #~ "B<MALLOC_CHECK_> が設定されていると、特殊な実装が用いられ、 単純なエラーに"
7129 #~ "は耐えることができるようになる (効率は悪くなる)。例えば、 B<free>() を同"
7130 #~ "じ引き数で二度呼び出してしまう、 1 バイトだけ行きすぎてしまう (off-by-one "
7131 #~ "バグ) などがこれに当たる。 しかし、これらのエラーの全てを防ぐことができる"
7132 #~ "わけではなく、 その場合にはメモリリークが起こってしまう。 "
7133 #~ "B<MALLOC_CHECK_> が 0 にセットされていると、ヒープの破壊を黙って無視す"
7134 #~ "る。 1 にセットされていると、診断メッセージが標準エラー出力に表示される。 "
7135 #~ "2 にセットされていると、ただちに B<abort>(3) が呼び出される。 3 にセット"
7136 #~ "されていると、診断メッセージが標準エラー出力に表示され、 プログラムは強制"
7137 #~ "終了 (abort) される。 B<MALLOC_CHECK_> に 0 以外の値をセットして役に立つ状"
7138 #~ "況としては、 実際のプロセスのクラッシュがずっと後に起こり、 本当の原因を探"
7139 #~ "し出すのが非常に困難な場合などが挙げられるだろう。"